diff options
author | Olof Johansson <olof@lixom.net> | 2013-04-02 10:59:15 -0700 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2013-04-02 10:59:28 -0700 |
commit | c2573077dfacebdf58f69c666e8f15e9528e5a12 (patch) | |
tree | e2a6b24366a6b8d75e5b885d82ed25a11da35317 /arch/arm | |
parent | 46f101df788b38fafa08e85dcbf85d3bff6c1ea3 (diff) | |
parent | c0114709ed85a5693eb74acdfa03d94f7f12e5b8 (diff) | |
download | linux-c2573077dfacebdf58f69c666e8f15e9528e5a12.tar.bz2 |
Merge branch 'gic' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 into next/cleanup
* 'gic' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
irqchip: gic: Perform the gic_secondary_init() call via CPU notifier
irqchip: gic: Call handle_bad_irq() directly
arm: Move chained_irq_(enter|exit) to a generic file
arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h
+ Linux 3.9-rc3
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm')
82 files changed, 123 insertions, 285 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5bfd584929c8..eaae82a182ed 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -49,7 +49,7 @@ config ARM select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select KTIME_SCALAR select PERF_USE_VMALLOC select RTC_LIB @@ -556,7 +556,6 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK_DOVE select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI @@ -1658,13 +1657,16 @@ config LOCAL_TIMERS accounting to be spread across the timer interval, preventing a "thundering herd" at every timer tick. +# The GPIO number here must be sorted by descending number. In case of +# a multiplatform kernel, we just want the highest value required by the +# selected platforms. config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 355 if ARCH_U8500 - default 264 if MACH_H4700 default 512 if SOC_OMAP5 + default 355 if ARCH_U8500 default 288 if ARCH_VT8500 || ARCH_SUNXI + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. @@ -1888,8 +1890,9 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" - depends on ARM && OF + depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 + depends on !GENERIC_ATOMIC64 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index acddddac7ee4..ecfcdba2d17c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -492,7 +492,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX50_IMX53_UART || \ + DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART default 1 help diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 71768b8a1ab9..84aa2caf07ed 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -115,4 +115,4 @@ i: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image System.map "$(INSTALL_PATH)" -subdir- := bootp compressed +subdir- := bootp compressed dts diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index f8e4855bc9a5..070bba4f2585 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -64,5 +64,13 @@ status = "okay"; /* No CD or WP GPIOs */ }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 6f1acc75e155..5b708208b607 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -31,7 +31,6 @@ mpic: interrupt-controller@d0020000 { compatible = "marvell,mpic"; #interrupt-cells = <1>; - #address-cells = <1>; #size-cells = <1>; interrupt-controller; }; @@ -54,7 +53,7 @@ reg = <0xd0012000 0x100>; reg-shift = <2>; interrupts = <41>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012100 { @@ -62,7 +61,7 @@ reg = <0xd0012100 0x100>; reg-shift = <2>; interrupts = <42>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 1443949c165e..ca00d8326c87 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -46,7 +46,7 @@ reg = <0xd0012200 0x100>; reg-shift = <2>; interrupts = <43>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012300 { @@ -54,7 +54,7 @@ reg = <0xd0012300 0x100>; reg-shift = <2>; interrupts = <44>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 4bf2a8774aa7..7e0481e2441a 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -105,7 +105,7 @@ compatible = "fixed-clock"; reg = <1>; #clock-cells = <0>; - clock-frequency = <150000000>; + clock-frequency = <250000000>; }; }; }; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 69140ba99f46..9de93096601a 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -319,9 +319,8 @@ }; }; - ab8500@5 { + ab8500 { compatible = "stericsson,ab8500"; - reg = <5>; /* mailbox 5 is i2c */ interrupt-parent = <&intc>; interrupts = <0 40 0x4>; interrupt-controller; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 67dbe20868a2..f7509cafc377 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -197,6 +197,11 @@ status = "disabled"; }; + rtc@d8500 { + compatible = "marvell,orion-rtc"; + reg = <0xd8500 0x20>; + }; + crypto: crypto@30000 { compatible = "marvell,orion-crypto"; reg = <0x30000 0x10000>, diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index 592fb9dc35bd..379128eb9d98 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -221,7 +221,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 55f4191a626e..2b587a74b813 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -158,7 +158,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index e54fffd48369..468c0a1d48d9 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -42,10 +42,9 @@ fsl,pins = <689 0x10000 /* DISP1_DRDY */ 482 0x10000 /* DISP1_HSYNC */ 489 0x10000 /* DISP1_VSYNC */ - 684 0x10000 /* DISP1_DAT_0 */ 515 0x10000 /* DISP1_DAT_22 */ 523 0x10000 /* DISP1_DAT_23 */ - 543 0x10000 /* DISP1_DAT_21 */ + 545 0x10000 /* DISP1_DAT_21 */ 553 0x10000 /* DISP1_DAT_20 */ 558 0x10000 /* DISP1_DAT_19 */ 564 0x10000 /* DISP1_DAT_18 */ diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 5bb0bf39d3b8..c9c44b2f62d7 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -42,12 +42,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; serial@12100 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index d430713ea9b9..e4e4930dc5cf 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -50,7 +50,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 2e3dd34e21a5..0196cf6b0ef2 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -37,7 +37,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index ef2d8c705709..289e51d86372 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -38,7 +38,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 1b133e0c566e..bd83b8fc7c83 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -73,7 +73,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 71902da33d63..5335b1aa8601 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -51,7 +51,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 504f16be8b54..12ccf74ac3c4 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -78,7 +78,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 6cae4599c4b3..93c3afbef9ee 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -115,7 +115,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 8db3123ac80f..5bbd0542cdd3 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -34,7 +34,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts index 9510c9ea666c..9f55d95f35f5 100644 --- a/arch/arm/boot/dts/kirkwood-lschlv2.dts +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts index 739019c4cba9..5c84c118ed8d 100644 --- a/arch/arm/boot/dts/kirkwood-lsxhl.dts +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 662dfd81b1ce..758824118a9a 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -90,7 +90,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index e8e7ecef1650..6affd924fe11 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -23,7 +23,6 @@ }; serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 3a178cf708d7..a7412b937a8a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -117,7 +117,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index ede7fe0d7a87..d27f7245f8e7 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -18,12 +18,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; serial@12100 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 842ff95d60df..66eb45b00b25 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -108,7 +108,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 2c738d9dc82a..fada7e6d24d8 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -38,6 +38,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; + clocks = <&gate_clk 7>; }; gpio1: gpio@10140 { @@ -49,6 +50,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; + clocks = <&gate_clk 7>; }; serial@12000 { @@ -57,7 +59,6 @@ reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -67,7 +68,6 @@ reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -75,6 +75,7 @@ compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; + clocks = <&gate_clk 7>; }; spi@10600 { diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5a3a58b7e18f..0077fc8510b7 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -11,7 +11,7 @@ / { model = "LaCie Ethernet Disk mini V2"; - compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { reg = <0x00000000 0x4000000>; /* 64 MB */ diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 27f31a5fa494..d3ec32f6b790 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -298,7 +298,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 936d2306e7e1..7e8769bd5977 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -75,6 +75,9 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0xffe01000 0x1000>; interrupts = <0 180 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9a428931d042..48d00a099ce3 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -118,6 +118,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0x304>; + clocks = <&tegra_car 132>; }; intc: interrupt-controller { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 767803e1fd55..9d87a3ffe998 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -119,6 +119,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0xf04>; + clocks = <&tegra_car 214>; }; intc: interrupt-controller { diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index fbbc5bb022d5..6a99e30f81d2 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -116,6 +116,7 @@ CONFIG_SND_SOC=y CONFIG_SND_MXS_SOC=y CONFIG_SND_SOC_MXS_SGTL5000=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b16bae2c9a60..bd07864f14a0 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -126,6 +126,8 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 35c21c375d81..53c15dec7af6 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -30,6 +30,11 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *); void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); +#ifdef CONFIG_MULTI_IRQ_HANDLER +extern void (*handle_arch_irq)(struct pt_regs *); +extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); +#endif + #endif #endif diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index 18c883023339..2092ee1e1300 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -20,11 +20,6 @@ struct seq_file; extern void init_FIQ(int); extern int show_fiq_list(struct seq_file *, int); -#ifdef CONFIG_MULTI_IRQ_HANDLER -extern void (*handle_arch_irq)(struct pt_regs *); -extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); -#endif - /* * This is for easy migration, but should be changed in the source */ @@ -35,35 +30,4 @@ do { \ raw_spin_unlock(&desc->lock); \ } while(0) -#ifndef __ASSEMBLY__ -/* - * Entry/exit functions for chained handlers where the primary IRQ chip - * may implement either fasteoi or level-trigger flow control. - */ -static inline void chained_irq_enter(struct irq_chip *chip, - struct irq_desc *desc) -{ - /* FastEOI controllers require no action on entry. */ - if (chip->irq_eoi) - return; - - if (chip->irq_mask_ack) { - chip->irq_mask_ack(&desc->irq_data); - } else { - chip->irq_mask(&desc->irq_data); - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - } -} - -static inline void chained_irq_exit(struct irq_chip *chip, - struct irq_desc *desc) -{ - if (chip->irq_eoi) - chip->irq_eoi(&desc->irq_data); - else - chip->irq_unmask(&desc->irq_data); -} -#endif - #endif diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h index 5c27696de14f..8b1f37bfeeec 100644 --- a/arch/arm/include/asm/xen/events.h +++ b/arch/arm/include/asm/xen/events.h @@ -2,6 +2,7 @@ #define _ASM_ARM_XEN_EVENTS_H #include <asm/ptrace.h> +#include <asm/atomic.h> enum ipi_vector { XEN_PLACEHOLDER_VECTOR, @@ -15,26 +16,8 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return raw_irqs_disabled_flags(regs->ARM_cpsr); } -/* - * We cannot use xchg because it does not support 8-byte - * values. However it is safe to use {ldr,dtd}exd directly because all - * platforms which Xen can run on support those instructions. - */ -static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val) -{ - xen_ulong_t oldval; - unsigned int tmp; - - wmb(); - asm volatile("@ xchg_xen_ulong\n" - "1: ldrexd %0, %H0, [%3]\n" - " strexd %1, %2, %H2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (oldval), "=&r" (tmp) - : "r" (val), "r" (ptr) - : "memory", "cc"); - return oldval; -} +#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \ + atomic64_t, \ + counter), (val)) #endif /* _ASM_ARM_XEN_EVENTS_H */ diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 2ea7059b840b..c20a870ea9c9 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = { /* If you choose to use a pin other than PB16 it needs to be 3.3V */ .pin = AT91_PIN_PB16, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index a033b8df9fb2..869cbecf00b7 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = { static struct w1_gpio_platform_data w1_gpio_pdata = { .pin = AT91_PIN_PA29, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index c5d7e1e9d757..a5afcf76550e 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -22,10 +22,9 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_address.h> -#include <asm/mach/irq.h> - #include <mach/hardware.h> #include <mach/at91_pio.h> diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d63d399c7bae..7bc0f9aa8b33 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -26,6 +26,7 @@ #include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/irqchip/arm-gic.h> +#include <linux/irqchip/chained_irq.h> #include <asm/proc-fns.h> #include <asm/exception.h> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 60f7c5be057d..95e04bd5813f 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,7 +20,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -76,13 +75,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit exynos_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index 8797a7001720..a984573e0d02 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/smp_scu.h> @@ -25,11 +24,6 @@ extern void secondary_startup(void); -static void __cpuinit highbank_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { highbank_set_cpu_jump(cpu, secondary_startup); @@ -67,7 +61,6 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations highbank_smp_ops __initdata = { .smp_init_cpus = highbank_smp_init_cpus, .smp_prepare_cpus = highbank_smp_prepare_cpus, - .smp_secondary_init = highbank_secondary_init, .smp_boot_secondary = highbank_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = highbank_cpu_die, diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 7b025ee528a5..2f9ff93a4e61 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -172,7 +172,7 @@ static struct clk *clk[clk_max]; static struct clk_onecell_data clk_data; static enum mx6q_clks const clks_init_on[] __initconst = { - mmdc_ch0_axi, rom, + mmdc_ch0_axi, rom, pll1_sys, }; static struct clk_div_table clk_enet_ref_table[] = { diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 921fc1555854..a58c8b0527cc 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup) #ifdef CONFIG_PM /* - * The following code is located into the .data section. This is to - * allow phys_l2x0_saved_regs to be accessed with a relative load - * as we are running on physical address here. + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. */ - .data - .align #ifdef CONFIG_CACHE_L2X0 .macro pl310_resume - ldr r2, phys_l2x0_saved_regs + adr r0, l2x0_saved_regs_offset + ldr r2, [r0] + add r2, r2, r0 ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl @@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup) str r1, [r0, #L2X0_CTRL] @ re-enable L2 .endm - .globl phys_l2x0_saved_regs -phys_l2x0_saved_regs: - .long 0 +l2x0_saved_regs_offset: + .word l2x0_saved_regs - . + #else .macro pl310_resume .endm diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 7c0b03f67b05..77e9a25ed0f6 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -52,16 +51,6 @@ void imx_scu_standby_enable(void) writel_relaxed(val, scu_base); } -static void __cpuinit imx_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); @@ -96,7 +85,6 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations imx_smp_ops __initdata = { .smp_init_cpus = imx_smp_init_cpus, .smp_prepare_cpus = imx_smp_prepare_cpus, - .smp_secondary_init = imx_secondary_init, .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index ee42d20cba19..5faba7a3c95f 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -22,8 +22,6 @@ #include "common.h" #include "hardware.h" -extern unsigned long phys_l2x0_saved_regs; - static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = { void __init imx6q_pm_init(void) { - /* - * The l2x0 core code provides an infrastucture to save and restore - * l2x0 registers across suspend/resume cycle. But because imx6q - * retains L2 content during suspend and needs to resume L2 before - * MMU is enabled, it can only utilize register saving support and - * have to take care of restoring on its own. So we save physical - * address of the data structure used by l2x0 core to save registers, - * and later restore the necessary ones in imx6q resume entry. - */ -#ifdef CONFIG_CACHE_L2X0 - phys_l2x0_saved_regs = __pa(&l2x0_saved_regs); -#endif - suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index d42730a1d4ab..d599e354ca57 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = { static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { .pin = 14, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device vulcan_w1_gpio = { diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 2e73e9d53f70..d367aa6b47bb 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void) struct device_node *np = of_find_compatible_node( NULL, NULL, "marvell,kirkwood-gating-clock"); - struct of_phandle_args clkspec; + struct clk *clk; clkspec.np = np; clkspec.args_count = 1; - clkspec.args[0] = CGC_BIT_GE0; - orion_clkdev_add(NULL, "mv643xx_eth_port.0", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_PEX0; orion_clkdev_add("0", "pcie", of_clk_get_from_provider(&clkspec)); @@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void) orion_clkdev_add("1", "pcie", of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_GE1; - orion_clkdev_add(NULL, "mv643xx_eth_port.1", + clkspec.args[0] = CGC_BIT_SDIO; + orion_clkdev_add(NULL, "mvsdio", of_clk_get_from_provider(&clkspec)); + + /* + * The ethernet interfaces forget the MAC address assigned by + * u-boot if the clocks are turned off. Until proper DT support + * is available we always enable them for now. + */ + clkspec.args[0] = CGC_BIT_GE0; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk); + clk_prepare_enable(clk); + + clkspec.args[0] = CGC_BIT_GE1; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk); + clk_prepare_enable(clk); } static void __init kirkwood_of_clk_init(void) diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 42932865416a..00cdb0a5dac8 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/cputype.h> @@ -42,13 +41,6 @@ static inline int get_core_count(void) static void __cpuinit msm_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c index 8fb23af154b3..e26eeba46598 100644 --- a/arch/arm/mach-mxs/icoll.c +++ b/arch/arm/mach-mxs/icoll.c @@ -100,7 +100,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = { .xlate = irq_domain_xlate_onecell, }; -void __init icoll_of_init(struct device_node *np, +static void __init icoll_of_init(struct device_node *np, struct device_node *interrupt_parent) { /* diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 052186713347..3218f1f2c0e0 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -402,17 +402,17 @@ static void __init cfa10049_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); + + mxsfb_pdata.mode_list = cfa10049_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init cfa10037_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); - - mxsfb_pdata.mode_list = cfa10049_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init apf28_init(void) diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index a4294aa9f301..e63b7d87acbd 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -18,6 +18,7 @@ #include <mach/mx23.h> #include <mach/mx28.h> +#include <mach/common.h> /* * Define the MX23 memory map. diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c index 54add60f94c9..1dff46703753 100644 --- a/arch/arm/mach-mxs/ocotp.c +++ b/arch/arm/mach-mxs/ocotp.c @@ -19,6 +19,7 @@ #include <asm/processor.h> /* for cpu_relax() */ #include <mach/mxs.h> +#include <mach/common.h> #define OCOTP_WORD_OFFSET 0x20 #define OCOTP_WORD_COUNT 0x20 diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index fb18831e88aa..14f7e9920479 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -31,6 +31,8 @@ #include <plat/i2c.h> +#include <mach/irqs.h> + #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); #else diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 49ac3dfebef9..8111cd9ff3e5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -311,9 +311,6 @@ config MACH_OMAP_ZOOM2 default y select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -321,9 +318,6 @@ config MACH_OMAP_ZOOM3 default y select OMAP_PACKAGE_CBP select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 0274ff7a2a2b..e54a48060198 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -102,6 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_sync32k_timer_init, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, @@ -119,6 +120,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_secure_sync32k_timer_init, .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f7c4616cbb60..d2ea68ea678a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/usb/phy.h> #include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -98,6 +99,7 @@ static void __init rx51_init(void) sdrc_params = nokia_get_sdram_timings(); omap_sdrc_init(sdrc_params, sdrc_params); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); rx51_peripherals_init(); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 0a6b9c7a63da..40f4a03d728f 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -108,7 +108,6 @@ void omap35xx_init_late(void); void omap3630_init_late(void); void am35xx_init_late(void); void ti81xx_init_late(void); -void omap4430_init_late(void); int omap2_common_pm_late_init(void); #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e4b16c8efe8b..410e1bac7815 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1122,9 +1122,6 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); - /* Now the GPMC is initialised, unreserve the chip-selects */ - gpmc_cs_map = 0; - return 0; } @@ -1383,6 +1380,9 @@ static int gpmc_probe(struct platform_device *pdev) if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); + /* Now the GPMC is initialised, unreserve the chip-selects */ + gpmc_cs_map = 0; + rc = gpmc_probe_dt(pdev); if (rc < 0) { clk_disable_unprepare(gpmc_l3_clk); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 6a217c98db54..f82cf878d6af 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -211,8 +211,6 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -EINVAL; } - pr_err("%s: Could not find signal %s\n", __func__, muxname); - return -ENODEV; } @@ -234,6 +232,8 @@ int __init omap_mux_get_by_name(const char *muxname, return mux_mode; } + pr_err("%s: Could not find signal %s\n", __func__, muxname); + return -ENODEV; } @@ -739,8 +739,9 @@ static void __init omap_mux_dbg_create_entry( list_for_each_entry(e, &partition->muxmodes, node) { struct omap_mux *m = &e->mux; - (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir, - m, &omap_mux_dbg_signal_fops); + (void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO, + mux_dbg_dir, m, + &omap_mux_dbg_signal_fops); } } diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index d9727218dd0a..e7a449758ab5 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -67,13 +67,6 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu) 4, 0, 0, 0, 0, 0); /* - * If any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 4b788310f6a6..c7c92e78f0cf 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -11,7 +11,6 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/mach/map.h> #include <asm/smp_plat.h> @@ -49,13 +48,6 @@ void __init sirfsoc_map_scu(void) static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index af41888acbd6..969b0ba7fa70 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = { .pin = GPIO_ONE_WIRE, .is_open_drain = 0, .enable_external_pullup = w1_enable_external_pullup, + .ext_pullup_enable_pin = -EINVAL, }; struct platform_device raumfeld_w1_gpio_device = { diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c index c1b96f7cc587..05be3e2487ae 100644 --- a/arch/arm/mach-s3c24xx/irq.c +++ b/arch/arm/mach-s3c24xx/irq.c @@ -25,6 +25,7 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 953eb1f9388d..384e27dd3601 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/emev2.h> #include <asm/smp_plat.h> @@ -85,11 +84,6 @@ static int __maybe_unused emev2_cpu_kill(unsigned int cpu) } -static void __cpuinit emev2_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); @@ -124,7 +118,6 @@ static void __init emev2_smp_init_cpus(void) struct smp_operations emev2_smp_ops __initdata = { .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, - .smp_secondary_init = emev2_secondary_init, .smp_boot_secondary = emev2_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = emev2_cpu_kill, diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 3a4acf23edcf..994906560edd 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/r8a7779.h> #include <asm/smp_plat.h> @@ -132,11 +131,6 @@ static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu) } -static void __cpuinit r8a7779_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { struct r8a7779_pm_ch *ch = NULL; @@ -186,7 +180,6 @@ static void __init r8a7779_smp_init_cpus(void) struct smp_operations r8a7779_smp_ops __initdata = { .smp_init_cpus = r8a7779_smp_init_cpus, .smp_prepare_cpus = r8a7779_smp_prepare_cpus, - .smp_secondary_init = r8a7779_secondary_init, .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = r8a7779_cpu_kill, diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index acb46a94ccdf..d0f9aca22477 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -59,11 +58,6 @@ static unsigned int __init sh73a0_get_core_count(void) return scu_get_core_count(scu_base); } -static void __cpuinit sh73a0_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); @@ -138,7 +132,6 @@ static void sh73a0_cpu_die(unsigned int cpu) struct smp_operations sh73a0_smp_ops __initdata = { .smp_init_cpus = sh73a0_smp_init_cpus, .smp_prepare_cpus = sh73a0_smp_prepare_cpus, - .smp_secondary_init = sh73a0_secondary_init, .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = sh73a0_cpu_kill, diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 84c60fa8daa0..ca14d1d5ac7f 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> @@ -33,16 +32,6 @@ extern void __iomem *sys_manager_base_addr; extern void __iomem *rst_manager_base_addr; -static void __cpuinit socfpga_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; @@ -109,7 +98,6 @@ static void socfpga_cpu_die(unsigned int cpu) struct smp_operations socfpga_smp_ops __initdata = { .smp_init_cpus = socfpga_smp_init_cpus, .smp_prepare_cpus = socfpga_smp_prepare_cpus, - .smp_secondary_init = socfpga_secondary_init, .smp_boot_secondary = socfpga_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = socfpga_cpu_die, diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c index af4ade61cd95..551c69c9a228 100644 --- a/arch/arm/mach-spear13xx/platsmp.c +++ b/arch/arm/mach-spear13xx/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/io.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> #include <mach/spear.h> @@ -28,13 +27,6 @@ static void __iomem *scu_base = IOMEM(VA_SCU_BASE); static void __cpuinit spear13xx_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f9d754f90c59..d2b3937c4014 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -14,7 +14,7 @@ #define pr_fmt(fmt) "SPEAr3xx: " fmt #include <linux/amba/pl022.h> -#include <linux/amba/pl08x.h> +#include <linux/amba/pl080.h> #include <linux/io.h> #include <plat/pl080.h> #include <mach/generic.h> diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 2c6b3d55213b..9348d3c496a9 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -18,7 +18,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <linux/clk/tegra.h> #include <asm/cacheflush.h> @@ -44,13 +43,6 @@ static cpumask_t tegra_cpu_init_mask; static void __cpuinit tegra_secondary_init(unsigned int cpu) { - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 18f7af339dc9..152b1309b9af 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -16,7 +16,6 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -58,13 +57,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit ux500_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c index 8badaabe70a1..f4143f5bfa5b 100644 --- a/arch/arm/mach-virt/platsmp.c +++ b/arch/arm/mach-virt/platsmp.c @@ -21,8 +21,6 @@ #include <linux/smp.h> #include <linux/of.h> -#include <linux/irqchip/arm-gic.h> - #include <asm/psci.h> #include <asm/smp_plat.h> @@ -45,14 +43,8 @@ static int __cpuinit virt_boot_secondary(unsigned int cpu, return -ENODEV; } -static void __cpuinit virt_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - struct smp_operations __initdata virt_smp_ops = { .smp_init_cpus = virt_smp_init_cpus, .smp_prepare_cpus = virt_smp_prepare_cpus, - .smp_secondary_init = virt_secondary_init, .smp_boot_secondary = virt_boot_secondary, }; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c7e3759f16d3..e9db6b4bf65a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -342,6 +342,7 @@ static int __init atomic_pool_init(void) { struct dma_pool *pool = &atomic_pool; pgprot_t prot = pgprot_dmacoherent(pgprot_kernel); + gfp_t gfp = GFP_KERNEL | GFP_DMA; unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; @@ -361,8 +362,8 @@ static int __init atomic_pool_init(void) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, atomic_pool_init); else - ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, - &page, atomic_pool_init); + ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page, + atomic_pool_init); if (ptr) { int i; diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c index febe3862873c..807ac8e5cbc0 100644 --- a/arch/arm/plat-orion/addr-map.c +++ b/arch/arm/plat-orion/addr-map.c @@ -157,9 +157,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i)); /* - * Chip select enabled? + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). */ - if (size & 1) { + if ((size & 1) && !(base & 0xF)) { struct mbus_dram_window *w; w = &orion_mbus_dram_info.cs[cs++]; diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f980cf3d2baa..5d205e74e495 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <mach/map.h> @@ -23,8 +24,6 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> -#include <asm/mach/irq.h> - static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c index bae56131a50a..fafdb059043a 100644 --- a/arch/arm/plat-samsung/s5p-irq-gpioint.c +++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -22,8 +23,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> -#include <asm/mach/irq.h> - #define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u)) #define CON_OFFSET 0x700 diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 739d016eb273..8a08c31b5e20 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -10,7 +10,7 @@ choice config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" - select ARCH_HAVE_CPUFREQ + select ARCH_HAS_CPUFREQ select ARM_GIC select CPU_V7 select GPIO_SPEAR_SPICS diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index f2ac15561778..1e1b2d769748 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -14,7 +14,6 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -37,13 +36,6 @@ static DEFINE_SPINLOCK(boot_lock); void __cpuinit versatile_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ |