summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2019-12-12 09:38:22 -0800
committerOlof Johansson <olof@lixom.net>2019-12-12 09:38:23 -0800
commit89f33b984a51364465b32f8239eeb1daf62a6c03 (patch)
tree875fbf105b5ba9d524829392b8e1ec20a4983850 /arch/arm
parent9103bb419aef8b908a169ebed0e1c16ae060576a (diff)
parent7947e3238b64c00c396e6f5738f94c4d653bc6a2 (diff)
downloadlinux-89f33b984a51364465b32f8239eeb1daf62a6c03.tar.bz2
Merge tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.5: - Add missing jedec,spi-nor compatible for imx6ul-14x14-evk board, so that SPI NOR device can be probed. - Fix power button of E60K02 board by removing LDORTC2 regulator. - A couple of fixes on serial number support of i.MX6ULL/ULZ SoCs to remove the boot regression caused by 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs"). - A couple of fixes on LS1028A SoC TMU regarding to calibration data and reboot register configuration. - Fix a regression seen on imx6ul-evk board by marking always-on for the regulator that is shared by many peripherals. - Explicitly restore CONFIG_DEBUG_FS in imx_v6_v7_defconfig. * tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: e60k02: fix power button ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing Link: https://lore.kernel.org/r/20191212122427.GK15858@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/e60k02.dtsi5
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dtsi28
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig1
-rw-r--r--arch/arm/mach-imx/cpu.c8
4 files changed, 27 insertions, 15 deletions
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 6472b056a001..5a2c5320437d 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -265,11 +265,6 @@
regulator-name = "LDORTC1";
regulator-boot-on;
};
-
- ldortc2_reg: LDORTC2 {
- regulator-name = "LDORTC2";
- regulator-boot-on;
- };
};
};
};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 1506eb12b21e..212144511b66 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -30,14 +30,26 @@
enable-active-high;
};
- reg_sensors: regulator-sensors {
+ reg_peri_3v3: regulator-peri-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sensors_reg>;
- regulator-name = "sensors-supply";
+ pinctrl-0 = <&pinctrl_peri_3v3>;
+ regulator-name = "VPERI_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ /*
+ * If you want to want to make this dynamic please
+ * check schematics and test all affected peripherals:
+ *
+ * - sensors
+ * - ethernet phy
+ * - can
+ * - bluetooth
+ * - wm8960 audio codec
+ * - ov5640 camera
+ */
+ regulator-always-on;
};
reg_can_3v3: regulator-can-3v3 {
@@ -140,6 +152,7 @@
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
+ phy-supply = <&reg_peri_3v3>;
status = "okay";
};
@@ -148,6 +161,7 @@
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rmii";
phy-handle = <&ethphy1>;
+ phy-supply = <&reg_peri_3v3>;
status = "okay";
mdio {
@@ -193,8 +207,8 @@
magnetometer@e {
compatible = "fsl,mag3110";
reg = <0x0e>;
- vdd-supply = <&reg_sensors>;
- vddio-supply = <&reg_sensors>;
+ vdd-supply = <&reg_peri_3v3>;
+ vddio-supply = <&reg_peri_3v3>;
};
};
@@ -227,7 +241,7 @@
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q256a";
+ compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
@@ -462,7 +476,7 @@
>;
};
- pinctrl_sensors_reg: sensorsreggrp {
+ pinctrl_peri_3v3: peri3v3grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
>;
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 26d6dee67aa6..3608e55eaecd 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -462,6 +462,7 @@ CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index d8118031c51f..871f98342d50 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -84,7 +84,7 @@ struct device * __init imx_soc_device_init(void)
const char *ocotp_compat = NULL;
struct soc_device *soc_dev;
struct device_node *root;
- struct regmap *ocotp;
+ struct regmap *ocotp = NULL;
const char *soc_id;
u64 soc_uid = 0;
u32 val;
@@ -148,11 +148,11 @@ struct device * __init imx_soc_device_init(void)
soc_id = "i.MX6UL";
break;
case MXC_CPU_IMX6ULL:
- ocotp_compat = "fsl,imx6ul-ocotp";
+ ocotp_compat = "fsl,imx6ull-ocotp";
soc_id = "i.MX6ULL";
break;
case MXC_CPU_IMX6ULZ:
- ocotp_compat = "fsl,imx6ul-ocotp";
+ ocotp_compat = "fsl,imx6ull-ocotp";
soc_id = "i.MX6ULZ";
break;
case MXC_CPU_IMX6SLL:
@@ -175,7 +175,9 @@ struct device * __init imx_soc_device_init(void)
ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat);
if (IS_ERR(ocotp))
pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat);
+ }
+ if (!IS_ERR_OR_NULL(ocotp)) {
regmap_read(ocotp, OCOTP_UID_H, &val);
soc_uid = val;
regmap_read(ocotp, OCOTP_UID_L, &val);