summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2013-09-09 14:45:47 +0200
committerLinus Walleij <linus.walleij@linaro.org>2013-09-20 23:03:57 +0200
commit7111f8780fcf770d8624d758fd240e585adf7d3c (patch)
tree89237602dae060cb483153be7bc4f8cc44810a76 /arch/arm
parente9004f5039b3840089cb1cb0fe558a81e2bb55f0 (diff)
downloadlinux-7111f8780fcf770d8624d758fd240e585adf7d3c.tar.bz2
ARM: iop32x: request and issue reset using gpio
As the IOP GPIO driver supports gpiolib we can use the standard GPIO calls to issue a reset of the machine instead of using the custom gpio_line_set/config calls. Also request the GPIO when initializing the machine. Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-iop32x/n2100.c24
1 files changed, 22 insertions, 2 deletions
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 069144300b77..6bace5bc7ebb 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -288,8 +289,14 @@ static void n2100_power_off(void)
static void n2100_restart(enum reboot_mode mode, const char *cmd)
{
- gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
- gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+ int ret;
+
+ ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
+ if (ret) {
+ pr_crit("could not drive reset GPIO low\n");
+ return;
+ }
+ /* Wait for reset to happen */
while (1)
;
}
@@ -308,6 +315,19 @@ static void power_button_poll(unsigned long dummy)
add_timer(&power_button_poll_timer);
}
+static int __init n2100_request_gpios(void)
+{
+ int ret;
+
+ if (!machine_is_n2100())
+ return 0;
+
+ ret = gpio_request(N2100_HARDWARE_RESET, "reset");
+ if (ret)
+ pr_err("could not request reset GPIO\n");
+ return 0;
+}
+device_initcall(n2100_request_gpios);
static void __init n2100_init_machine(void)
{