summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorKishon Vijay Abraham I <kishon@ti.com>2017-06-09 14:11:41 +0530
committerUlf Hansson <ulf.hansson@linaro.org>2017-06-20 10:30:40 +0200
commitab723a6d9e22f5c1d82e34159c48c24febe79f77 (patch)
treeaa9f994c604044650fa684166dc589b3f6dc527f /arch/arm
parent4760257cb54e29e9a90e0ce849f4efcd67718816 (diff)
downloadlinux-ab723a6d9e22f5c1d82e34159c48c24febe79f77.tar.bz2
ARM: dts: omap3-overo: Remove "vqmmc-supply" property from MMC dt node
commit 94647a30124e2c7 ("ARM: dts: omap3-overo: Enable WiFi/BT combo") while enabling WiFi/BT combo added regulator to trigger the nReset signal of the Bluetooth module in vqmmc-supply. However BT should be handled by UART. Moreover "vqmmc" is not a defined binding for omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far, mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc" binding. Remove "vqmmc-supply" property in mmc2 here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/omap3-overo-base.dtsi11
1 files changed, 0 insertions, 11 deletions
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 401fae838fe9..cd220342a805 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -74,16 +74,6 @@
gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */
startup-delay-us = <10000>;
};
-
- /* Regulator to trigger the nReset signal of the Bluetooth module */
- w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset {
- compatible = "regulator-fixed";
- regulator-name = "regulator-w3cbw003c-bt-nreset";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164: BT nReset */
- startup-delay-us = <10000>;
- };
};
&omap3_pmx_core {
@@ -191,7 +181,6 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&w3cbw003c_npoweron>;
- vqmmc-supply = <&w3cbw003c_bt_nreset>;
vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
bus-width = <4>;
cap-sdio-irq;