Merge tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl updates from Linus Walleij:
 "This is the bulk pin control changes for the v3.17 merge development
  cycle:

   - get rid of the .disable() callback from the driver callback vtable.

     This callback was abused and counterintuitive since a pin or group
     of pins can be said to always be in some setting, and never really
     disabled.  We now only enable a certain muxing, and move between
     some certain muxings, we never "disable" a mux setting

   - some janitorial moving the MSM, Samsung and Nomadik and drivers to
     their own subdirectories for a clearer view in the subsystem.  This
     will continue

   - kill off the use of the return value from gpiochip_remove(), this
     will be done in parallel in the GPIO subsystem and hopefully not
     trigger too many unchecked return value warnings before we get rid
     of this altogether

   - a huge set of changes and improvements to the Allwinner sunxi
     drivers especially for their latest A23 and A31 SoCs, and some
     ground work for the new sun8i platform family

   - a large set of Rockchip driver improvements adding support for the
     RK3288 SoC

   - advances in migration of older Freescale platforms to pin control,
     especially i.MX1

   - Samsung and Exynos improvements

   - support for the Qualcomm MSM8960 SoC

   - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail
     drivers

   - a bunch of nice janitorial work done with cppcheck"

* tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits)
  pinctrl: baytrail: Convert to use gpiolib irqchip
  pinctrl: sunxi: number gpio ranges starting from 0
  pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
  pinctrl: rockchip: add drive-strength control for rk3288
  pinctrl: rockchip: add separate type for rk3288
  pinctrl: rockchip: set is_generic in pinconf_ops
  pinctrl: msm: drop negativity check on unsigned value
  pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
  pinctrl: qcom: Make muxing of gpio function explicit
  pinctrl: nomadik: move all Nomadik drivers to subdir
  pinctrl: samsung: Group all drivers in a sub-dir
  sh-pfc: sh73a0: Introduce the use of devm_regulator_register
  sh-pfc: Add renesas,pfc-r8a7791 to binding documentation
  pinctrl: msm: move all qualcomm drivers to subdir
  pinctrl: msm: Add msm8960 definitions
  pinctrl: samsung: Allow pin value to be initialized using pinfunc
  pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes
  pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs
  pinctrl: samsung: Handle GPIO request and free using pinctrl helpers
  pinctrl: samsung: Decouple direction setting from pinctrl
  ...

2 files changed, 0 insertions, 47 deletions

diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h
index f5387b4de577..597bb5f74dcc 100644
--- a/arch/arm/boot/dts/imx27-pinfunc.h
+++ b/arch/arm/boot/dts/imx27-pinfunc.h
@@ -101,14 +101,6 @@
 #define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
 #define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
 #define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
-#define MX27_PAD_UNUSED0__UNUSED0                          0x20 0x004
-#define MX27_PAD_UNUSED0__GPIO2_0                          0x20 0x032
-#define MX27_PAD_UNUSED1__UNUSED1                          0x21 0x004
-#define MX27_PAD_UNUSED1__GPIO2_1                          0x21 0x032
-#define MX27_PAD_UNUSED2__UNUSED2                          0x22 0x004
-#define MX27_PAD_UNUSED2__GPIO2_2                          0x22 0x032
-#define MX27_PAD_UNUSED3__UNUSED3                          0x23 0x004
-#define MX27_PAD_UNUSED3__GPIO2_3                          0x23 0x032
 #define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
 #define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
 #define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
@@ -183,16 +175,6 @@
 #define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
 #define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
 #define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
-#define MX27_PAD_UNUSED4__UNUSED4                          0x40 0x004
-#define MX27_PAD_UNUSED4__GPIO3_0                          0x40 0x032
-#define MX27_PAD_UNUSED5__UNUSED5                          0x41 0x004
-#define MX27_PAD_UNUSED5__GPIO3_1                          0x41 0x032
-#define MX27_PAD_UNUSED6__UNUSED6                          0x42 0x004
-#define MX27_PAD_UNUSED6__GPIO3_2                          0x42 0x032
-#define MX27_PAD_UNUSED7__UNUSED7                          0x43 0x004
-#define MX27_PAD_UNUSED7__GPIO3_3                          0x43 0x032
-#define MX27_PAD_UNUSED8__UNUSED8                          0x44 0x004
-#define MX27_PAD_UNUSED8__GPIO3_4                          0x44 0x032
 #define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
 #define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
 #define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
@@ -422,18 +404,6 @@
 #define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
 #define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
 #define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
-#define MX27_PAD_UNUSED9__UNUSED9                          0x9a 0x004
-#define MX27_PAD_UNUSED9__GPIO5_26                         0x9a 0x032
-#define MX27_PAD_UNUSED10__UNUSED10                        0x9b 0x004
-#define MX27_PAD_UNUSED10__GPIO5_27                        0x9b 0x032
-#define MX27_PAD_UNUSED11__UNUSED11                        0x9c 0x004
-#define MX27_PAD_UNUSED11__GPIO5_28                        0x9c 0x032
-#define MX27_PAD_UNUSED12__UNUSED12                        0x9d 0x004
-#define MX27_PAD_UNUSED12__GPIO5_29                        0x9d 0x032
-#define MX27_PAD_UNUSED13__UNUSED13                        0x9e 0x004
-#define MX27_PAD_UNUSED13__GPIO5_30                        0x9e 0x032
-#define MX27_PAD_UNUSED14__UNUSED14                        0x9f 0x004
-#define MX27_PAD_UNUSED14__GPIO5_31                        0x9f 0x032
 #define MX27_PAD_NFRB__NFRB                                0xa0 0x000
 #define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
 #define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
@@ -506,21 +476,5 @@
 #define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
 #define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
 #define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
-#define MX27_PAD_UNUSED15__UNUSED15                        0xb8 0x004
-#define MX27_PAD_UNUSED15__GPIO6_24                        0xb8 0x032
-#define MX27_PAD_UNUSED16__UNUSED16                        0xb9 0x004
-#define MX27_PAD_UNUSED16__GPIO6_25                        0xb9 0x032
-#define MX27_PAD_UNUSED17__UNUSED17                        0xba 0x004
-#define MX27_PAD_UNUSED17__GPIO6_26                        0xba 0x032
-#define MX27_PAD_UNUSED18__UNUSED18                        0xbb 0x004
-#define MX27_PAD_UNUSED18__GPIO6_27                        0xbb 0x032
-#define MX27_PAD_UNUSED19__UNUSED19                        0xbc 0x004
-#define MX27_PAD_UNUSED19__GPIO6_28                        0xbc 0x032
-#define MX27_PAD_UNUSED20__UNUSED20                        0xbd 0x004
-#define MX27_PAD_UNUSED20__GPIO6_29                        0xbd 0x032
-#define MX27_PAD_UNUSED21__UNUSED21                        0xbe 0x004
-#define MX27_PAD_UNUSED21__GPIO6_30                        0xbe 0x032
-#define MX27_PAD_UNUSED22__UNUSED22                        0xbf 0x004
-#define MX27_PAD_UNUSED22__GPIO6_31                        0xbf 0x032
 
 #endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 0fbd4f156bfa..d46b9495cd55 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -4,7 +4,6 @@ menuconfig ARCH_SUNXI
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
 	select PINCTRL
-	select PINCTRL_SUNXI
 	select SUN4I_TIMER
 
 if ARCH_SUNXI