Merge tag 'omap-for-v3.8-rc4/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Minimal omap fixes for the -rc series:

- A build fix for recently merged omap DRM changes

- Regression fixes from the common clock framework conversion
  for omap4 audio and omap2 reboot

- Regression fix for pandaboard WLAN control UART muxing caused by
  u-boot only muxing essential pins nowadays

- Timer iteration fix for CONFIG_OF_DYNAMIC

- A section mismatch fix for ocp2scp init

* tag 'omap-for-v3.8-rc4/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (306 commits)
  ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport
  ARM: OMAP2+: DT node Timer iteration fix
  ARM: OMAP2+: Fix section warning for omap_init_ocp2scp()
  ARM: OMAP2+: fix build break for omapdrm
  ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls
  ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM
  ARM: OMAP4: clock data: Lock ABE DPLL on all revisions
  + Linux 3.8-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>

16 files changed, 173 insertions, 25 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e44da40d984f..5ebb44fe826a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 targets += dtbs
+targets += $(dtb-y)
 endif
 
 # *.dtb used to be generated in the directory above. Clean out the
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 68bccf41a2c6..cb7bcc51608d 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -306,6 +306,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<1 16 0x1 0x0	/* PB16 periph A */
+							 1 17 0x1 0x0	/* PB17 periph A */
+							 1 18 0x1 0x0>;	/* PB18 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<1 19 0x1 0x0	/* PB19 periph A */
+							 1 20 0x1 0x0	/* PB20 periph A */
+							 1 21 0x1 0x0>;	/* PB21 periph A */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -450,6 +466,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffbc000 0x4000>;
 				interrupts = <14 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 32ec62cf5385..271d4de026e9 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -271,6 +271,38 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<1 0 0x2 0x0	/* PB0 periph B */
+							 1 1 0x2 0x0	/* PB1 periph B */
+							 1 2 0x2 0x0>;	/* PB2 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<1 3 0x2 0x0	/* PB3 periph B */
+							 1 4 0x2 0x0	/* PB4 periph B */
+							 1 5 0x2 0x0>;	/* PB5 periph B */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<1 6 0x1 0x0	/* PB6 periph A */
+							 1 7 0x1 0x0	/* PB7 periph A */
+							 1 8 0x1 0x0>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<1 9 0x1 0x0	/* PB9 periph A */
+							 1 10 0x1 0x0	/* PB10 periph A */
+							 1 11 0x1 0x0>;	/* PB11 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -368,6 +400,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff98000 0x4000>;
 				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
@@ -375,6 +409,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <17 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 231858ffd850..6b1d4cab24c2 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -290,6 +290,38 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<3 0 0x1 0x0	/* PD0 periph A */
+							 3 1 0x1 0x0	/* PD1 periph A */
+							 3 2 0x1 0x0>;	/* PD2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<3 3 0x1 0x0	/* PD3 periph A */
+							 3 4 0x1 0x0	/* PD4 periph A */
+							 3 5 0x1 0x0>;	/* PD5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<3 10 0x1 0x0	/* PD10 periph A */
+							 3 11 0x1 0x0	/* PD11 periph A */
+							 3 12 0x1 0x0>;	/* PD12 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<3 13 0x1 0x0	/* PD13 periph A */
+							 3 14 0x1 0x0	/* PD14 periph A */
+							 3 15 0x1 0x0>;	/* PD15 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -425,6 +457,8 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
@@ -432,6 +466,8 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfffa0000 0x4000>;
 				interrupts = <17 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index e9efb34f4379..80e29c605d4e 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -28,6 +28,7 @@
 		tcb1 = &tcb1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
+		ssc0 = &ssc0;
 	};
 	cpus {
 		cpu@0 {
@@ -244,6 +245,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<0 24 0x2 0x0	/* PA24 periph B */
+							 0 25 0x2 0x0	/* PA25 periph B */
+							 0 26 0x2 0x0>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0>;	/* PA29 periph B */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -294,6 +311,15 @@
 				status = "disabled";
 			};
 
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 40ac3a4eb1ab..3a47cf952146 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -88,13 +88,6 @@
 				interrupts = <1 4 7>;
 			};
 
-			ssc0: ssc@f0010000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xf0010000 0x4000>;
-				interrupts = <28 4 5>;
-				status = "disabled";
-			};
-
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
@@ -290,6 +283,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<0 24 0x2 0x0	/* PA24 periph B */
+							 0 25 0x2 0x0	/* PA25 periph B */
+							 0 26 0x2 0x0>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0>;	/* PA29 periph B */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -333,6 +342,15 @@
 				};
 			};
 
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
 			mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 5c8e9cee2c2e..769c1feee1c4 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 		  OMAP_PULL_ENA),
 	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
 
+	/* UART2 - BT/FM/GPS shared transport */
+	OMAP4_MUX(UART2_CTS,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RTS,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RX,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_TX,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c
index 7e5febe456d9..ab7e952d2070 100644
--- a/arch/arm/mach-omap2/cclock2420_data.c
+++ b/arch/arm/mach-omap2/cclock2420_data.c
@@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();
 
 	omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c
index eda079b96c6a..eb3dab68d536 100644
--- a/arch/arm/mach-omap2/cclock2430_data.c
+++ b/arch/arm/mach-omap2/cclock2430_data.c
@@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();
 
 	omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 5789a5e25563..a2cc046b47f4 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
 	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
 	 * state when turning the ABE clock domain. Workaround this by
 	 * locking the ABE DPLL on boot.
+	 * Lock the ABE DPLL in any case to avoid issues with audio.
 	 */
-	if (cpu_is_omap446x()) {
-		rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-		if (!rc)
-			rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-		if (rc)
-			pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-	}
+	rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+	if (!rc)
+		rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5e304d0719a2..626f3ea3142f 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
 	return cnt;
 }
 
-static void omap_init_ocp2scp(void)
+static void __init omap_init_ocp2scp(void)
 {
 	struct omap_hwmod	*oh;
 	struct platform_device	*pdev;
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 4c7566c7e24a..2a2cfa88ddbf 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/omap_drm.h>
 
+#include "soc.h"
 #include "omap_device.h"
 #include "omap_hwmod.h"
 
@@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
 			oh->name);
 	}
 
-	platform_data.omaprev = GET_OMAP_REVISION();
+	platform_data.omaprev = GET_OMAP_TYPE;
 
 	return platform_device_register(&omap_drm_device);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 129d5081ed15..793f54ac7d14 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	 * currently reset very early during boot, before I2C is
 	 * available, so it doesn't seem that we have any choice in
 	 * the kernel other than to avoid resetting it.
+	 *
+	 * Also, McPDM needs to be configured to NO_IDLE mode when it
+	 * is in used otherwise vital clocks will be gated which
+	 * results 'slow motion' audio playback.
 	 */
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 691aa674665a..b8ad6e632bb8 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
 	struct device_node *np;
 
 	for_each_matching_node(np, match) {
-		if (!of_device_is_available(np)) {
-			of_node_put(np);
+		if (!of_device_is_available(np))
 			continue;
-		}
 
-		if (property && !of_get_property(np, property, NULL)) {
-			of_node_put(np);
+		if (property && !of_get_property(np, property, NULL))
 			continue;
-		}
 
 		of_add_property(np, &device_disabled);
 		return np;
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index a611ad3153c7..b6132aa95dc0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -463,6 +463,9 @@
 	GPIO76_LCD_PCLK,	\
 	GPIO77_LCD_BIAS
 
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
 
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 8047ee0effc5..616cb87b6179 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void)
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO113_GPIO,
+	GPIO113_AC97_nRESET_GPIO_HIGH,
 	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
+	GPIO95_AC97_nRESET_GPIO_HIGH,
 	GPIO95_AC97_nRESET,
 };