Merge tag 'zynq-cleanup-for-3.15-v2' of git://git.xilinx.com/linux-xlnx into next/cleanup2

Merge "arm: Xilinx Zynq cleanup patches for v3.15" from Michal Simek:

- Redesign SLCR initialization to enable
  driver developing which targets SLCR space

* tag 'zynq-cleanup-for-3.15-v2' of git://git.xilinx.com/linux-xlnx:
  ARM: zynq: Add waituart implementation
  ARM: zynq: Move of_clk_init from clock driver
  ARM: zynq: Introduce zynq_slcr_unlock()
  ARM: zynq: Add and use zynq_slcr_read/write() helper functions
  ARM: zynq: Make zynq_slcr_base static
  ARM: zynq: Map I/O memory on clkc init
  ARM: zynq: Hang iomapped slcr address on device_node
  ARM: zynq: Split slcr in two parts
  ARM: zynq: Move clock_init from slcr to common
  arm: dt: zynq: Add fclk-enable property to clkc node

[Arnd: remove SOC_BUS support from pull request]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

6 files changed, 122 insertions, 39 deletions

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 8b67b19392ec..602e12eedb01 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -123,29 +123,28 @@
 		} ;
 
 		slcr: slcr@f8000000 {
-			compatible = "xlnx,zynq-slcr";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon";
 			reg = <0xF8000000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				clkc: clkc {
-					#clock-cells = <1>;
-					compatible = "xlnx,ps7-clkc";
-					ps-clk-frequency = <33333333>;
-					clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
-							"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
-							"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
-							"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
-							"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
-							"dma", "usb0_aper", "usb1_aper", "gem0_aper",
-							"gem1_aper", "sdio0_aper", "sdio1_aper",
-							"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
-							"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
-							"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
-							"dbg_trc", "dbg_apb";
-				};
+			ranges;
+			clkc: clkc@100 {
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				ps-clk-frequency = <33333333>;
+				fclk-enable = <0>;
+				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper", "sdio1_aper",
+						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+						"dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
 			};
 		};
 
diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S
index f9aa9740a73f..0b762fafa758 100644
--- a/arch/arm/include/debug/zynq.S
+++ b/arch/arm/include/debug/zynq.S
@@ -42,6 +42,9 @@
 		.endm
 
 		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UART_SR_OFFSET]
+		tst	\rd, #UART_SR_TXEMPTY
+		beq	1001b
 		.endm
 
 		.macro	busyuart,rd,rx
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 6b04260aa142..323e5053cb9f 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -14,5 +14,6 @@ config ARCH_ZYNQ
 	select SPARSE_IRQ
 	select CADENCE_TTC_TIMER
 	select ARM_GLOBAL_TIMER
+	select MFD_SYSCON
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 8c09a8393fb6..dca60d5ba756 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -19,6 +19,7 @@
 #include <linux/cpumask.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/clk/zynq.h>
 #include <linux/clocksource.h>
 #include <linux/of_address.h>
@@ -72,11 +73,16 @@ static void __init zynq_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	platform_device_register(&zynq_cpuidle_device);
+
+	zynq_slcr_init();
 }
 
 static void __init zynq_timer_init(void)
 {
-	zynq_slcr_init();
+	zynq_early_slcr_init();
+
+	zynq_clock_init();
+	of_clk_init(NULL);
 	clocksource_of_init();
 }
 
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index c22c92cea8cb..b097844d3175 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -20,6 +20,7 @@
 void zynq_secondary_startup(void);
 
 extern int zynq_slcr_init(void);
+extern int zynq_early_slcr_init(void);
 extern void zynq_slcr_system_reset(void);
 extern void zynq_slcr_cpu_stop(int cpu);
 extern void zynq_slcr_cpu_start(int cpu);
@@ -33,7 +34,6 @@ extern int zynq_cpun_start(u32 address, int cpu);
 extern struct smp_operations zynq_smp_ops __initdata;
 #endif
 
-extern void __iomem *zynq_slcr_base;
 extern void __iomem *zynq_scu_base;
 
 /* Hotplug */
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 1836d5a34606..a37d49a6e657 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -15,7 +15,9 @@
  */
 
 #include <linux/io.h>
+#include <linux/mfd/syscon.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/clk/zynq.h>
 #include "common.h"
 
@@ -29,7 +31,56 @@
 #define SLCR_A9_CPU_CLKSTOP		0x10
 #define SLCR_A9_CPU_RST			0x1
 
-void __iomem *zynq_slcr_base;
+static void __iomem *zynq_slcr_base;
+static struct regmap *zynq_slcr_regmap;
+
+/**
+ * zynq_slcr_write - Write to a register in SLCR block
+ *
+ * @val:	Value to write to the register
+ * @offset:	Register offset in SLCR block
+ *
+ * Return:	a negative value on error, 0 on success
+ */
+static int zynq_slcr_write(u32 val, u32 offset)
+{
+	if (!zynq_slcr_regmap) {
+		writel(val, zynq_slcr_base + offset);
+		return 0;
+	}
+
+	return regmap_write(zynq_slcr_regmap, offset, val);
+}
+
+/**
+ * zynq_slcr_read - Read a register in SLCR block
+ *
+ * @val:	Pointer to value to be read from SLCR
+ * @offset:	Register offset in SLCR block
+ *
+ * Return:	a negative value on error, 0 on success
+ */
+static int zynq_slcr_read(u32 *val, u32 offset)
+{
+	if (zynq_slcr_regmap)
+		return regmap_read(zynq_slcr_regmap, offset, val);
+
+	*val = readl(zynq_slcr_base + offset);
+
+	return 0;
+}
+
+/**
+ * zynq_slcr_unlock - Unlock SLCR registers
+ *
+ * Return:	a negative value on error, 0 on success
+ */
+static inline int zynq_slcr_unlock(void)
+{
+	zynq_slcr_write(SLCR_UNLOCK_MAGIC, SLCR_UNLOCK_OFFSET);
+
+	return 0;
+}
 
 /**
  * zynq_slcr_system_reset - Reset the entire system.
@@ -43,16 +94,16 @@ void zynq_slcr_system_reset(void)
 	 * Note that this seems to require raw i/o
 	 * functions or there's a lockup?
 	 */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
+	zynq_slcr_unlock();
 
 	/*
 	 * Clear 0x0F000000 bits of reboot status register to workaround
 	 * the FSBL not loading the bitstream after soft-reboot
 	 * This is a temporary solution until we know more.
 	 */
-	reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
-	writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
-	writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET);
+	zynq_slcr_read(&reboot, SLCR_REBOOT_STATUS_OFFSET);
+	zynq_slcr_write(reboot & 0xF0FFFFFF, SLCR_REBOOT_STATUS_OFFSET);
+	zynq_slcr_write(1, SLCR_PS_RST_CTRL_OFFSET);
 }
 
 /**
@@ -61,11 +112,13 @@ void zynq_slcr_system_reset(void)
  */
 void zynq_slcr_cpu_start(int cpu)
 {
-	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	u32 reg;
+
+	zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 	reg &= ~(SLCR_A9_CPU_RST << cpu);
-	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 	reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu);
-	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
@@ -74,19 +127,40 @@ void zynq_slcr_cpu_start(int cpu)
  */
 void zynq_slcr_cpu_stop(int cpu)
 {
-	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	u32 reg;
+
+	zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 	reg |= (SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu;
-	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
- * zynq_slcr_init
- * Returns 0 on success, negative errno otherwise.
+ * zynq_slcr_init - Regular slcr driver init
+ *
+ * Return:	0 on success, negative errno otherwise.
  *
  * Called early during boot from platform code to remap SLCR area.
  */
 int __init zynq_slcr_init(void)
 {
+	zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
+	if (IS_ERR(zynq_slcr_regmap)) {
+		pr_err("%s: failed to find zynq-slcr\n", __func__);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * zynq_early_slcr_init - Early slcr init function
+ *
+ * Return:	0 on success, negative errno otherwise.
+ *
+ * Called very early during boot from platform code to unlock SLCR.
+ */
+int __init zynq_early_slcr_init(void)
+{
 	struct device_node *np;
 
 	np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
@@ -101,13 +175,13 @@ int __init zynq_slcr_init(void)
 		BUG();
 	}
 
+	np->data = (__force void *)zynq_slcr_base;
+
 	/* unlock the SLCR so that registers can be changed */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
+	zynq_slcr_unlock();
 
 	pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
 
-	zynq_clock_init(zynq_slcr_base);
-
 	of_node_put(np);
 
 	return 0;