Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB pull request for 3.14-rc1

  Lots of little things all over the place, and the usual USB gadget
  updates, and XHCI fixes (some for an issue reported by a lot of
  people).  USB PHY updates as well as chipidea updates and fixes.

  All of these have been in the linux-next tree with no reported issues"

* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
  usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
  usb: chipidea: need to mask INT_STATUS when write otgsc
  usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
  usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
  usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
  usb: chipidea: add freescale imx28 special write register method
  usb: ehci: add freescale imx28 special write register method
  usb: core: check for valid id_table when using the RefId feature
  usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
  usb: core: bail out if user gives an unknown RefId when using new_id
  usb: core: allow a reference device for new_id
  usb: core: add sanity checks when using bInterfaceClass with new_id
  USB: image: correct spelling mistake in comment
  USB: c67x00: correct spelling mistakes in comments
  usb: delete non-required instances of include <linux/init.h>
  usb:hub set hub->change_bits when over-current happens
  Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
  xhci: Set scatter-gather limit to avoid failed block writes.
  xhci: Avoid infinite loop when sg urb requires too many trbs
  usb: gadget: remove unused variable in gr_queue_int()
  ...

1 files changed, 1 insertions, 37 deletions

diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 45e5ac707cbb..2c263051dc51 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -8,43 +8,7 @@
 #define	is_usb0_device(config)	0
 #endif
 
-struct omap_usb_config {
-	/* Configure drivers according to the connectors on your board:
-	 *  - "A" connector (rectagular)
-	 *	... for host/OHCI use, set "register_host".
-	 *  - "B" connector (squarish) or "Mini-B"
-	 *	... for device/gadget use, set "register_dev".
-	 *  - "Mini-AB" connector (very similar to Mini-B)
-	 *	... for OTG use as device OR host, initialize "otg"
-	 */
-	unsigned	register_host:1;
-	unsigned	register_dev:1;
-	u8		otg;	/* port number, 1-based:  usb1 == 2 */
-
-	u8		hmc_mode;
-
-	/* implicitly true if otg:  host supports remote wakeup? */
-	u8		rwc;
-
-	/* signaling pins used to talk to transceiver on usbN:
-	 *  0 == usbN unused
-	 *  2 == usb0-only, using internal transceiver
-	 *  3 == 3 wire bidirectional
-	 *  4 == 4 wire bidirectional
-	 *  6 == 6 wire unidirectional (or TLL)
-	 */
-	u8		pins[3];
-
-	struct platform_device *udc_device;
-	struct platform_device *ohci_device;
-	struct platform_device *otg_device;
-
-	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
-	u32 (*usb1_init)(unsigned nwires);
-	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
-
-	int (*ocpi_enable)(void);
-};
+#include <linux/platform_data/usb-omap1.h>
 
 void omap_otg_init(struct omap_usb_config *config);