Merge tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a fairly large set of bug fixes on top of -rc1, as most of
  them were ready but didn't quite make it into the last-minute pull
  requests for the merge window.

  Allwinner:
   - fix for incorrect CPU overtemperature limit

  Amlogic:
   - multiple smaller DT bugfixes, and missing device nodes

  Marvell EBU:
   - add missing aliases for ethernet switch ports on espressobin board

  Marvell MMP:
   - DTC warning fix
   - bugfix for camera interface power-down

  NXP i.MX:
   - re-enable the GPIO driver on all defconfigs

  ST STM32MP1:
   - fix random crashes from incorrect voltage settings

  Synaptics Berlin:
   - enable the correct hardware timer driver

  Texas Instruments K2G:
   - fix a boot regression in the power domain code

  TEE drivers:
   - fix regression in TEE "login" method

  SCMI drivers:
   - multiple code fixes for corner cases in newly added code

  MAINTAINERS file:
   - move Kukjin Kim and Sangbeom Kim to credits (used to work on
     Samsung Exynos)
   - Masahiro Yamada is stepping down as Uniphier maintainer

  I did not include a series of patches that work around a regression
  caused by a bugfix in an ethernet phy driver that resulted in an
  inadvertent DT binding change. This is still under discussion"

* tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
  soc: ti: ti_sci_pm_domains: check for proper args count in xlate
  ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board
  ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board
  ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC
  ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC
  ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"
  ARM: dts: mmp3: Add power domain for the camera
  arm64: berlin: Select DW_APB_TIMER_OF
  dt-bindings: sram: sunxi-sram: add V3s compatible string
  MAINTAINERS: Move Sangbeom Kim to credits
  MAINTAINERS: Move Kukjin Kim to credits
  MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver
  ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default
  ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default
  arm64: defconfig: Build in CONFIG_GPIO_MXC by default
  arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: amlogic: add missing ethernet reset ID
  firmware: arm_scmi: Fix duplicate workqueue name
  firmware: arm_scmi: Fix locking in notifications
  ...

10 files changed, 42 insertions, 9 deletions

diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
index f1a41152e9dd..adde62d6fce7 100644
--- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
+++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
@@ -227,12 +227,12 @@
 	/delete-property/ #size-cells;
 	spi-slave;
 	status = "okay";
-	ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>;
+	ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
 
 	slave {
 		compatible = "olpc,xo1.75-ec";
 		spi-cpha;
-		cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>;
+		cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index cc4efd0efabd..4ae630d37d09 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -296,6 +296,7 @@
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
 				clock-names = "axi";
+				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
 				#clock-cells = <0>;
 				clock-output-names = "mclk";
 				status = "disabled";
@@ -307,6 +308,7 @@
 				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
 				clock-names = "axi";
+				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
 				#clock-cells = <0>;
 				clock-output-names = "mclk";
 				status = "disabled";
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index ca109dc18238..2e77ccec3fc1 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -89,6 +89,14 @@
 		states = <1800000 0x1>,
 			 <2900000 0x0>;
 	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -150,11 +158,18 @@
 
 		regulators {
 			compatible = "st,stpmic1-regulators";
+			buck1-supply = <&vin>;
+			buck2-supply = <&vin>;
+			buck3-supply = <&vin>;
+			buck4-supply = <&vin>;
 			ldo1-supply = <&v3v3>;
 			ldo2-supply = <&v3v3>;
 			ldo3-supply = <&vdd_ddr>;
+			ldo4-supply = <&vin>;
 			ldo5-supply = <&v3v3>;
 			ldo6-supply = <&v3v3>;
+			vref_ddr-supply = <&vin>;
+			boost-supply = <&vin>;
 			pwr_sw1-supply = <&bst_out>;
 			pwr_sw2-supply = <&bst_out>;
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index a5307745719a..93398cfae97e 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -80,6 +80,14 @@
 		dais = <&sai2a_port &sai2b_port &i2s2_port>;
 		status = "okay";
 	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -240,9 +248,18 @@
 
 		regulators {
 			compatible = "st,stpmic1-regulators";
+			buck1-supply = <&vin>;
+			buck2-supply = <&vin>;
+			buck3-supply = <&vin>;
+			buck4-supply = <&vin>;
 			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&vin>;
 			ldo3-supply = <&vdd_ddr>;
+			ldo4-supply = <&vin>;
+			ldo5-supply = <&vin>;
 			ldo6-supply = <&v3v3>;
+			vref_ddr-supply = <&vin>;
+			boost-supply = <&vin>;
 			pwr_sw1-supply = <&bst_out>;
 			pwr_sw2-supply = <&bst_out>;
 
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 0f95a6ef8543..1c5a666c54b5 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -143,7 +143,7 @@
 			trips {
 				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index aeb1209e0804..bb70acc6b526 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -93,6 +93,7 @@ CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MXC=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0fa79bd00219..221f5c340c86 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -217,6 +217,7 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_74X164=y
+CONFIG_GPIO_MXC=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 70b709a669d2..e00be9faa23b 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -166,6 +166,7 @@ CONFIG_SPI_IMX=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_ASPEED=m
 CONFIG_GPIO_ASPEED_SGPIO=y
+CONFIG_GPIO_MXC=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e731cdf7c88c..a611b0c1e540 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -465,6 +465,7 @@ CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_TWL4030=y
+CONFIG_GPIO_MXC=y
 CONFIG_POWER_AVS=y
 CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_POWER_RESET_AS3722=y
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index 2d962fe48821..a3a64bf97250 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -35,13 +35,8 @@ ENTRY(ll_get_coherency_base)
 
 	/*
 	 * MMU is disabled, use the physical address of the coherency
-	 * base address. However, if the coherency fabric isn't mapped
-	 * (i.e its virtual address is zero), it means coherency is
-	 * not enabled, so we return 0.
+	 * base address, (or 0x0 if the coherency fabric is not mapped)
 	 */
-	ldr	r1, =coherency_base
-	cmp	r1, #0
-	beq	2f
 	adr	r1, 3f
 	ldr	r3, [r1]
 	ldr	r1, [r1, r3]