diff options
| author | Olof Johansson <olof@lixom.net> | 2019-12-05 13:16:58 -0800 |
|---|---|---|
| committer | Olof Johansson <olof@lixom.net> | 2019-12-05 13:18:54 -0800 |
| commit | 942e6f8a8314e5550e254519dfba4ccd5170421d (patch) | |
| tree | 75ec655b440fbc1c454247af38b5596dd8c78de9 /arch/arm | |
| parent | 336bab731be76a90291697e51d2aed0ad67d7cb5 (diff) | |
| parent | b08baef02b26cf7c2123e4a24a2fa1fb7a593ffb (diff) | |
| download | linux-942e6f8a8314e5550e254519dfba4ccd5170421d.tar.bz2 | |
Merge mainline/master into arm/fixes
This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm')
498 files changed, 27440 insertions, 8923 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8a50efb559f3..ba75e3661a41 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -7,7 +7,6 @@ config ARM select ARCH_HAS_BINFMT_FLAT select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DEVMEM_IS_ALLOWED - select ARCH_HAS_DMA_COHERENT_TO_PFN if SWIOTLB select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_FORTIFY_SOURCE @@ -117,7 +116,6 @@ config ARM select OLD_SIGSUSPEND3 select PCI_SYSCALL if PCI select PERF_USE_VMALLOC - select REFCOUNT_FULL select RTC_LIB select SYS_SUPPORTS_APM_EMULATION # Above selects are sorted alphabetically; please add new ones @@ -1020,7 +1018,7 @@ config ARM_ERRATA_775420 depends on CPU_V7 help This option enables the workaround for the 775420 Cortex-A9 (r2p2, - r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance + r2p6,r2p8,r2p10,r3p0) erratum. In case a data cache maintenance operation aborts with MMU exception, it might cause the processor to deadlock. This workaround puts DSB before executing ISB if an abort may occur on cache maintenance. @@ -1359,7 +1357,7 @@ config ARCH_NR_GPIO int default 2048 if ARCH_SOCFPGA default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \ - ARCH_ZYNQ + ARCH_ZYNQ || ARCH_ASPEED default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 default 416 if ARCH_SUNXI diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 5c476bd2b4ce..b562da2f7040 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -13,7 +13,7 @@ * size immediately following the kernel, we could build this into * a binary blob, and concatenate the zImage using the cat command. */ - .section .start,#alloc,#execinstr + .section .start, "ax" .type _start, #function .globl _start diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 9219389bbe61..a1e883c5e5c4 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -121,7 +121,7 @@ ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin -I$(obj) asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. -KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \ +KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \ sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \ -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) ) LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) @@ -165,7 +165,7 @@ $(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S # The .data section is already discarded by the linker script so no need # to bother about it here. check_for_bad_syms = \ -bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \ +bad_syms=$$($(NM) $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \ [ -z "$$bad_syms" ] || \ ( echo "following symbols must have non local/private scope:" >&2; \ echo "$$bad_syms" >&2; false ) diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 330cd3c2eae5..64c49747f8a3 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -19,7 +19,7 @@ static int node_offset(void *fdt, const char *node_path) } static int setprop(void *fdt, const char *node_path, const char *property, - uint32_t *val_array, int size) + void *val_array, int size) { int offset = node_offset(fdt, node_path); if (offset < 0) @@ -60,7 +60,7 @@ static uint32_t get_cell_size(const void *fdt) { int len; uint32_t cell_size = 1; - const uint32_t *size_len = getprop(fdt, "/", "#size-cells", &len); + const __be32 *size_len = getprop(fdt, "/", "#size-cells", &len); if (size_len) cell_size = fdt32_to_cpu(*size_len); @@ -129,7 +129,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) struct tag *atag = atag_list; /* In the case of 64 bits memory size, need to reserve 2 cells for * address and size for each bank */ - uint32_t mem_reg_property[2 * 2 * NR_BANKS]; + __be32 mem_reg_property[2 * 2 * NR_BANKS]; int memcount = 0; int ret, memsize; @@ -138,7 +138,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) return 1; /* if we get a DTB here we're done already */ - if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC)) + if (*(__be32 *)atag_list == cpu_to_fdt32(FDT_MAGIC)) return 0; /* validate the ATAG */ @@ -177,8 +177,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) /* if memsize is 2, that means that * each data needs 2 cells of 32 bits, * so the data are 64 bits */ - uint64_t *mem_reg_prop64 = - (uint64_t *)mem_reg_property; + __be64 *mem_reg_prop64 = + (__be64 *)mem_reg_property; mem_reg_prop64[memcount++] = cpu_to_fdt64(atag->u.mem.start); mem_reg_prop64[memcount++] = diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S index 88e2a88d324b..0e092c36da2f 100644 --- a/arch/arm/boot/compressed/big-endian.S +++ b/arch/arm/boot/compressed/big-endian.S @@ -6,7 +6,7 @@ * Author: Nicolas Pitre */ - .section ".start", #alloc, #execinstr + .section ".start", "ax" mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #(1 << 7) @ enable big endian mode diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 93dffed0ac6e..ead21e5f2b80 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -140,7 +140,7 @@ #endif .endm - .section ".start", #alloc, #execinstr + .section ".start", "ax" /* * sort out different calling conventions */ @@ -1273,7 +1273,7 @@ iflush: __armv5tej_mmu_cache_flush: tst r4, #1 movne pc, lr -1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test,clean,invalidate D cache bne 1b mcr p15, 0, r0, c7, c5, 0 @ flush I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h index b36c0289a308..6a0f1f524466 100644 --- a/arch/arm/boot/compressed/libfdt_env.h +++ b/arch/arm/boot/compressed/libfdt_env.h @@ -2,11 +2,13 @@ #ifndef _ARM_LIBFDT_ENV_H #define _ARM_LIBFDT_ENV_H +#include <linux/limits.h> #include <linux/types.h> #include <linux/string.h> #include <asm/byteorder.h> -#define INT_MAX ((int)(~0U>>1)) +#define INT32_MAX S32_MAX +#define UINT32_MAX U32_MAX typedef __be16 fdt16_t; typedef __be32 fdt32_t; diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S index 0284f84dcf38..27577644ee72 100644 --- a/arch/arm/boot/compressed/piggy.S +++ b/arch/arm/boot/compressed/piggy.S @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ - .section .piggydata,#alloc + .section .piggydata, "a" .globl input_data input_data: .incbin "arch/arm/boot/compressed/piggy_data" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b21b3a64641a..08011dc8c7a6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -45,7 +45,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91sam9x25ek.dtb \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ - at91-kizbox2.dtb \ + at91-kizbox2-2.dtb \ + at91-kizbox3-hs.dtb \ at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ at91-sama5d2_ptc_ek.dtb \ @@ -83,6 +84,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ + bcm2711-rpi-4-b.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ @@ -113,6 +115,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-luxul-abr-4500.dtb \ bcm47094-luxul-xap-1610.dtb \ bcm47094-luxul-xbr-4500.dtb \ + bcm47094-luxul-xwc-2000.dtb \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ @@ -337,7 +340,8 @@ dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ mmp2-brownstone.dtb \ - mmp2-olpc-xo-1-75.dtb + mmp2-olpc-xo-1-75.dtb \ + mmp3-dell-ariel.dtb dtb-$(CONFIG_ARCH_MPS2) += \ mps2-an385.dtb \ mps2-an399.dtb @@ -552,7 +556,8 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ - imx6sll-evk.dtb + imx6sll-evk.dtb \ + imx6sll-kobo-clarahd.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ @@ -583,6 +588,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ @@ -753,6 +759,9 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-moxa-uc-2101.dtb \ am335x-moxa-uc-8100-me-t.dtb \ am335x-nano.dtb \ + am335x-netcan-plus-1xx.dtb \ + am335x-netcom-plus-2xx.dtb \ + am335x-netcom-plus-8xx.dtb \ am335x-pdu001.dtb \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ @@ -765,6 +774,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-wega-rdk.dtb \ am335x-osd3358-sm-red.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ + omap4-droid-bionic-xt875.dtb \ omap4-droid4-xt894.dtb \ omap4-duovero-parlor.dtb \ omap4-kc1.dtb \ @@ -1105,6 +1115,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ sun8i-h3-mapleboard-mp130.dtb \ + sun8i-h3-nanopi-duo2.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ @@ -1288,6 +1299,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge40.dtb \ aspeed-bmc-facebook-wedge100.dtb \ aspeed-bmc-facebook-yamp.dtb \ + aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-lenovo-hr630.dtb \ @@ -1298,6 +1310,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-swift.dtb \ + aspeed-bmc-opp-tacoma.dtb \ aspeed-bmc-opp-vesnin.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index ed235f263e29..05e7b5d4a95b 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -258,18 +258,6 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 89b4cf2cb7f8..6c9187bc0f17 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -191,38 +191,16 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "peripheral"; interrupts-extended = <&intc 18 &tps 0>; interrupt-names = "mc", "vbus"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 2f6652ef9a15..5811fb8d4fdf 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -278,38 +278,16 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "peripheral"; interrupts-extended = <&intc 18 &tps 0>; interrupt-names = "mc", "vbus"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c0 { baseboard_eeprom: baseboard_eeprom@50 { compatible = "atmel,24c256"; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 8cd81dc0cc72..b14a2759c69b 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -153,30 +153,12 @@ }; /* USB */ -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb1 { pinctrl-names = "default"; pinctrl-0 = <&usb1_drvvbus>; - - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - /* microSD */ &mmc1 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 1fe3b566ba3d..c6fe9db660e2 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -330,26 +330,6 @@ status = "okay"; }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - &epwmss0 { status = "okay"; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index a00145705c9b..6f0a6be93098 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -433,35 +433,10 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index e28a5b82fdf3..a97f9df460c1 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -523,35 +523,10 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &epwmss2 { status = "okay"; diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index c9611ea4b884..81e0f63e94d3 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -115,10 +115,6 @@ }; }; -&cppi41dma { - status = "okay"; -}; - &elm { status = "okay"; }; @@ -328,30 +324,12 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - &usb0 { dr_mode = "peripheral"; - status = "okay"; -}; - -&usb0_phy { - status = "okay"; }; &usb1 { dr_mode = "host"; - status = "okay"; -}; - -&usb1_phy { - status = "okay"; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index eabcc8b2e4ea..c9f354fc984a 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -217,35 +217,10 @@ pinctrl-0 = <&uart0_pins>; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index a8005e975ea2..fef582852820 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -283,36 +283,14 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &cpsw_emac0 { phy-handle = <ðphy0>; phy-mode = "rmii"; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 671d4a5da9c4..6495a125c01f 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -111,27 +111,10 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - /* Power */ &vbat { regulator-name = "vbat"; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts index 783d411f2cef..244df9c5a537 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -290,36 +290,14 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts new file mode 100644 index 000000000000..1e4dbc85c120 --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" + +/ { + model = "NetCAN"; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@1 { + label = "can_data"; + linux,default-trigger = "netdev"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@2 { + label = "can_error"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Data LED */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Error LED */ + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* CAN TX */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* CAN RX */ + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_emac1 { + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts new file mode 100644 index 000000000000..9a6cd8ef821f --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" + +/ { + model = "NetCom Plus"; +}; + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) /* CTS */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* RTS */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* CTS */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* RTS */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */ + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_emac1 { + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; +}; diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts new file mode 100644 index 000000000000..2298563f7334 --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" + +/ { + model = "NetCom Plus"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&dip_switches>; + + dip_switches: pinmux_dip_switches { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + tca6416_pins: pinmux_tca6416_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3) + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&i2c1 { + tca6416a: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tca6416_pins>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tca6416b: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + tca6416c: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_emac1 { + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; +}; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index f47cc9fea253..1d2902083483 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -384,38 +384,16 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "peripheral"; interrupts-extended = <&intc 18 &tps 0>; interrupt-names = "mc", "vbus"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 9bfa032bcada..6c547c83e5dd 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -237,31 +237,6 @@ }; /* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; - -&usb1_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts index 3141255f72c2..e4dcfa087a1b 100644 --- a/arch/arm/boot/dts/am335x-pdu001.dts +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -384,34 +384,6 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - /* * Disable soc's rtc as we have no VBAT for it. This makes the board * rtc (Microchip MCP79400) the default rtc device 'rtc0'. diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index e7764ecdf65f..6d7608d9377b 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -552,38 +552,18 @@ /* USB */ &usb { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&usb_pins>; }; -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &am33xx_pinmux { usb_pins: pinmux_usb { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index ff4f919d22f6..4da719098028 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -206,32 +206,10 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "otg"; }; -&usb1_phy { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; - -&cppi41dma { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi index 5aff02a95766..6fbf4ac739e7 100644 --- a/arch/arm/boot/dts/am335x-regor.dtsi +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -200,24 +200,3 @@ status = "okay"; linux,rs485-enabled-at-boot-time; }; - -/* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 5b0368504015..1eaa26533466 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -117,10 +117,6 @@ status = "okay"; }; -&cppi41dma { - status = "okay"; -}; - &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; @@ -358,20 +354,7 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 2f82095e7210..f4684c8eaffe 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -512,36 +512,14 @@ status = "disabled"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "otg"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &mmc1 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 61fc4cd2d164..1359bf8715e6 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -191,32 +191,6 @@ status = "okay"; }; -/* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb1 { dr_mode = "host"; - status = "okay"; -}; - -&usb1_phy { - status = "okay"; }; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 7a9eb2b0d45b..3a8a205c27b5 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -129,7 +129,6 @@ gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x7000 0x4>, <0x7010 0x4>, <0x7114 0x4>; @@ -163,7 +162,6 @@ target-module@9000 { /* 0x44e09000, ap 16 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x9050 0x4>, <0x9054 0x4>, <0x9058 0x4>; @@ -195,7 +193,6 @@ target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0xb000 0x8>, <0xb010 0x8>, <0xb090 0x8>; @@ -306,6 +303,13 @@ }; }; + usb_ctrl_mod: control@620 { + compatible = "ti,am335x-usb-ctrl-module"; + reg = <0x620 0x10>, + <0x648 0x4>; + reg-names = "phy_ctrl", "wakeup"; + }; + wkup_m3_ipc: wkup_m3_ipc@1324 { compatible = "ti,am3352-wkup-m3-ipc"; reg = <0x1324 0x24>; @@ -368,7 +372,6 @@ target-module@35000 { /* 0x44e35000, ap 29 50.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x35000 0x4>, <0x35010 0x4>, <0x35014 0x4>; @@ -912,7 +915,6 @@ target-module@22000 { /* 0x48022000, ap 10 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x22050 0x4>, <0x22054 0x4>, <0x22058 0x4>; @@ -944,7 +946,6 @@ target-module@24000 { /* 0x48024000, ap 12 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x24050 0x4>, <0x24054 0x4>, <0x24058 0x4>; @@ -976,7 +977,6 @@ target-module@2a000 { /* 0x4802a000, ap 14 2a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x2a000 0x8>, <0x2a010 0x8>, <0x2a090 0x8>; @@ -1046,7 +1046,6 @@ target-module@38000 { /* 0x48038000, ap 16 02.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp0"; reg = <0x38000 0x4>, <0x38004 0x4>; reg-names = "rev", "sysc"; @@ -1077,7 +1076,6 @@ target-module@3c000 { /* 0x4803c000, ap 20 32.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp1"; reg = <0x3c000 0x4>, <0x3c004 0x4>; reg-names = "rev", "sysc"; @@ -1270,7 +1268,6 @@ target-module@4c000 { /* 0x4804c000, ap 32 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x4c000 0x4>, <0x4c010 0x4>, <0x4c114 0x4>; @@ -1312,7 +1309,6 @@ target-module@60000 { /* 0x48060000, ap 36 0c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x602fc 0x4>, <0x60110 0x4>, <0x60114 0x4>; @@ -1385,7 +1381,6 @@ target-module@c8000 { /* 0x480c8000, ap 87 06.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0xc8000 0x4>, <0xc8010 0x4>; reg-names = "rev", "sysc"; @@ -1506,7 +1501,6 @@ target-module@9c000 { /* 0x4819c000, ap 46 5a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x9c000 0x8>, <0x9c010 0x8>, <0x9c090 0x8>; @@ -1592,7 +1586,6 @@ target-module@a6000 { /* 0x481a6000, ap 48 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0xa6050 0x4>, <0xa6054 0x4>, <0xa6058 0x4>; @@ -1622,7 +1615,6 @@ target-module@a8000 { /* 0x481a8000, ap 50 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0xa8050 0x4>, <0xa8054 0x4>, <0xa8058 0x4>; @@ -1652,7 +1644,6 @@ target-module@aa000 { /* 0x481aa000, ap 52 1a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0xaa050 0x4>, <0xaa054 0x4>, <0xaa058 0x4>; @@ -1682,7 +1673,6 @@ target-module@ac000 { /* 0x481ac000, ap 54 38.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0xac000 0x4>, <0xac010 0x4>, <0xac114 0x4>; @@ -1716,7 +1706,6 @@ target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0xae000 0x4>, <0xae010 0x4>, <0xae114 0x4>; @@ -1806,7 +1795,6 @@ target-module@d8000 { /* 0x481d8000, ap 64 66.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xd82fc 0x4>, <0xd8110 0x4>, <0xd8114 0x4>; @@ -2061,7 +2049,6 @@ target-module@10000 { /* 0x48310000, ap 76 4e.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "rng"; reg = <0x11fe0 0x4>, <0x11fe4 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index fb6b8aa12cc5..646f11430dad 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -236,7 +236,6 @@ target-module@47810000 { compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0x478102fc 0x4>, <0x47810110 0x4>, <0x47810114 0x4>; @@ -263,37 +262,38 @@ }; }; - usb: usb@47400000 { - compatible = "ti,am33xx-usb"; - reg = <0x47400000 0x1000>; - ranges; + usb: target-module@47400000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x47400000 0x4>, + <0x47400010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - ti,hwmods = "usb_otg_hs"; - status = "disabled"; - - usb_ctrl_mod: control@44e10620 { - compatible = "ti,am335x-usb-ctrl-module"; - reg = <0x44e10620 0x10 - 0x44e10648 0x4>; - reg-names = "phy_ctrl", "wakeup"; - status = "disabled"; - }; + ranges = <0x0 0x47400000 0x5000>; - usb0_phy: usb-phy@47401300 { + usb0_phy: usb-phy@1300 { compatible = "ti,am335x-usb-phy"; - reg = <0x47401300 0x100>; + reg = <0x1300 0x100>; reg-names = "phy"; - status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; #phy-cells = <0>; }; - usb0: usb@47401000 { + usb0: usb@1400 { compatible = "ti,musb-am33xx"; - status = "disabled"; - reg = <0x47401400 0x400 - 0x47401000 0x200>; + reg = <0x1400 0x400>, + <0x1000 0x200>; reg-names = "mc", "control"; interrupts = <18>; @@ -329,20 +329,18 @@ "tx14", "tx15"; }; - usb1_phy: usb-phy@47401b00 { + usb1_phy: usb-phy@1b00 { compatible = "ti,am335x-usb-phy"; - reg = <0x47401b00 0x100>; + reg = <0x1b00 0x100>; reg-names = "phy"; - status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; #phy-cells = <0>; }; - usb1: usb@47401800 { + usb1: usb@1800 { compatible = "ti,musb-am33xx"; - status = "disabled"; - reg = <0x47401c00 0x400 - 0x47401800 0x200>; + reg = <0x1c00 0x400>, + <0x1800 0x200>; reg-names = "mc", "control"; interrupts = <19>; interrupt-names = "mc"; @@ -377,36 +375,35 @@ "tx14", "tx15"; }; - cppi41dma: dma-controller@47402000 { + cppi41dma: dma-controller@2000 { compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; + reg = <0x0000 0x1000>, + <0x2000 0x1000>, + <0x3000 0x1000>, + <0x4000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; #dma-channels = <30>; #dma-requests = <256>; - status = "disabled"; }; }; - ocmcram: ocmcram@40300000 { + ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x10000>; /* 64k */ ranges = <0x0 0x40300000 0x10000>; #address-cells = <1>; #size-cells = <1>; - pm_sram_code: pm-sram-code@0 { + pm_sram_code: pm-code-sram@0 { compatible = "ti,sram"; reg = <0x0 0x1000>; protect-exec; }; - pm_sram_data: pm-sram-data@1000 { + pm_sram_data: pm-data-sram@1000 { compatible = "ti,sram"; reg = <0x1000 0x1000>; pool; @@ -465,3 +462,29 @@ #include "am33xx-l4.dtsi" #include "am33xx-clocks.dtsi" + +&prcm { + prm_per: prm@c00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xc00 0x100>; + #reset-cells = <1>; + }; + + prm_wkup: prm@d00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xd00 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@f00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + }; + + prm_gfx: prm@1100 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0x1100 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index bf3002009b00..125379ecab2f 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -16,6 +16,37 @@ can = &hecc; }; + cpus { + cpu: cpu@0 { + /* Based on OMAP3630 variants OPP50 and OPP100 */ + operating-points-v2 = <&cpu0_opp_table>; + + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + /* + * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx + * appear to operate at 300MHz as well. Since AM3517 only + * lists one operating voltage, it will remain fixed at 1.2V + */ + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + }; + }; + ocp@68000000 { am35x_otg_hs: am35x_otg_hs@5c040000 { compatible = "ti,omap3-musb"; @@ -115,6 +146,12 @@ }; }; +/* Not currently working, probably needs at least different clocks */ +&rng_target { + status = "disabled"; + /delete-property/ clocks; +}; + /* Table Table 5-79 of the TRM shows 480ab000 is reserved */ &usb_otg_hs { status = "disabled"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index e507e4ae0d88..e7d7124a34ba 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -8,7 +8,7 @@ / { model = "TeeJet Mt.Ventoux"; - compatible = "teejet,mt_ventoux", "ti,omap3"; + compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 14bbc438055f..ca0aa3f26c0a 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -230,7 +230,6 @@ target-module@47810000 { compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0x478102fc 0x4>, <0x47810110 0x4>, <0x47810114 0x4>; @@ -351,20 +350,20 @@ }; }; - ocmcram: ocmcram@40300000 { + ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x40000>; /* 256k */ ranges = <0x0 0x40300000 0x40000>; #address-cells = <1>; #size-cells = <1>; - pm_sram_code: pm-sram-code@0 { + pm_sram_code: pm-code-sram@0 { compatible = "ti,sram"; reg = <0x0 0x1000>; protect-exec; }; - pm_sram_data: pm-sram-data@1000 { + pm_sram_data: pm-data-sram@1000 { compatible = "ti,sram"; reg = <0x1000 0x1000>; pool; @@ -375,3 +374,29 @@ #include "am437x-l4.dtsi" #include "am43xx-clocks.dtsi" + +&prcm { + prm_gfx: prm@400 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_per: prm@800 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x800 0x100>; + #reset-cells = <1>; + }; + + prm_wkup: prm@2000 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x2000 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@4000 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x4000 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 59770dd3785e..0dd59ee14585 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -132,7 +132,6 @@ target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x7000 0x4>, <0x7010 0x4>, <0x7114 0x4>; @@ -167,7 +166,6 @@ target-module@9000 { /* 0x44e09000, ap 16 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x9050 0x4>, <0x9054 0x4>, <0x9058 0x4>; @@ -195,7 +193,6 @@ target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0xb000 0x8>, <0xb010 0x8>, <0xb090 0x8>; @@ -373,7 +370,6 @@ target-module@35000 { /* 0x44e35000, ap 28 50.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x35000 0x4>, <0x35010 0x4>, <0x35014 0x4>; @@ -679,7 +675,6 @@ target-module@22000 { /* 0x48022000, ap 8 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x22050 0x4>, <0x22054 0x4>, <0x22058 0x4>; @@ -708,7 +703,6 @@ target-module@24000 { /* 0x48024000, ap 10 1c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x24050 0x4>, <0x24054 0x4>, <0x24058 0x4>; @@ -737,7 +731,6 @@ target-module@2a000 { /* 0x4802a000, ap 12 22.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x2a000 0x8>, <0x2a010 0x8>, <0x2a090 0x8>; @@ -817,7 +810,6 @@ target-module@38000 { /* 0x48038000, ap 14 04.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp0"; reg = <0x38000 0x4>, <0x38004 0x4>; reg-names = "rev", "sysc"; @@ -849,7 +841,6 @@ target-module@3c000 { /* 0x4803c000, ap 16 2a.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp1"; reg = <0x3c000 0x4>, <0x3c004 0x4>; reg-names = "rev", "sysc"; @@ -1048,7 +1039,6 @@ target-module@4c000 { /* 0x4804c000, ap 28 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x4c000 0x4>, <0x4c010 0x4>, <0x4c114 0x4>; @@ -1083,7 +1073,6 @@ target-module@60000 { /* 0x48060000, ap 30 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x602fc 0x4>, <0x60110 0x4>, <0x60114 0x4>; @@ -1149,7 +1138,6 @@ target-module@c8000 { /* 0x480c8000, ap 73 06.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0xc8000 0x4>, <0xc8010 0x4>; reg-names = "rev", "sysc"; @@ -1262,7 +1250,6 @@ target-module@9c000 { /* 0x4819c000, ap 38 52.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x9c000 0x8>, <0x9c010 0x8>, <0x9c090 0x8>; @@ -1388,7 +1375,6 @@ target-module@a6000 { /* 0x481a6000, ap 40 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0xa6050 0x4>, <0xa6054 0x4>, <0xa6058 0x4>; @@ -1417,7 +1403,6 @@ target-module@a8000 { /* 0x481a8000, ap 42 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0xa8050 0x4>, <0xa8054 0x4>, <0xa8058 0x4>; @@ -1446,7 +1431,6 @@ target-module@aa000 { /* 0x481aa000, ap 44 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0xaa050 0x4>, <0xaa054 0x4>, <0xaa058 0x4>; @@ -1475,7 +1459,6 @@ target-module@ac000 { /* 0x481ac000, ap 46 30.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0xac000 0x4>, <0xac010 0x4>, <0xac114 0x4>; @@ -1510,7 +1493,6 @@ target-module@ae000 { /* 0x481ae000, ap 48 32.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0xae000 0x4>, <0xae010 0x4>, <0xae114 0x4>; @@ -1614,7 +1596,6 @@ target-module@d8000 { /* 0x481d8000, ap 54 5e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xd82fc 0x4>, <0xd8110 0x4>, <0xd8114 0x4>; @@ -1999,7 +1980,6 @@ target-module@10000 { /* 0x48310000, ap 64 4e.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "rng"; reg = <0x11fe0 0x4>, <0x11fe4 0x4>; reg-names = "rev", "sysc"; @@ -2038,7 +2018,6 @@ target-module@20000 { /* 0x48320000, ap 82 34.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x20000 0x4>, <0x20010 0x4>, <0x20114 0x4>; @@ -2073,7 +2052,6 @@ target-module@22000 { /* 0x48322000, ap 116 64.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x22000 0x4>, <0x22010 0x4>, <0x22114 0x4>; @@ -2296,7 +2274,6 @@ target-module@47000 { /* 0x48347000, ap 110 70.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hdq1w"; reg = <0x47000 0x4>, <0x47014 0x4>, <0x47018 0x4>; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 0aaacea1d887..820ce3b60bb6 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -186,3 +186,30 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; + +&mac_sw { + pinctrl-names = "default", "sleep"; + status = "okay"; +}; + +&cpsw_port1 { + phy-handle = <ðphy0_sw>; + phy-mode = "rgmii"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + phy-handle = <ðphy1_sw>; + phy-mode = "rgmii"; + ti,dual-emac-pvid = <2>; +}; + +&davinci_mdio_sw { + ethphy0_sw: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1_sw: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index ea1c119feaa5..c3d966904d64 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -27,3 +27,8 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; + +&mac { + status = "okay"; + dual_emac; +}; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 7935d70874ce..fa0088025b2c 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -35,3 +35,8 @@ pinctrl-1 = <&mmc2_pins_default>; pinctrl-2 = <&mmc2_pins_default>; }; + +&mac { + status = "okay"; + dual_emac; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 423855a2a2d6..398721c7201c 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -363,11 +363,6 @@ ext-clk-src; }; -&mac { - status = "okay"; - dual_emac; -}; - &cpsw_emac0 { phy-handle = <ðphy0>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3f4bb44d85f0..e038abc0c6b4 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -103,6 +103,11 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + sdramc: sdramc@1400 { + compatible = "marvell,armada-xp-sdram-controller"; + reg = <0x1400 0x500>; + }; + L2: cache-controller@8000 { compatible = "arm,pl310-cache"; reg = <0x8000 0x1000>; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 267d0c178e55..654648b05c7c 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -90,7 +90,7 @@ }; internal-regs { - sdramc@1400 { + sdramc: sdramc@1400 { compatible = "marvell,armada-xp-sdram-controller"; reg = <0x1400 0x500>; }; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts index df048050615f..4ec0ae01b61d 100644 --- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -33,6 +33,11 @@ }; }; +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + &devbus_bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index ee15c77d3689..6c19984d668e 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -36,7 +36,7 @@ }; internal-regs { - sdramc@1400 { + sdramc: sdramc@1400 { compatible = "marvell,armada-xp-sdram-controller"; reg = <0x1400 0x500>; }; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index c9d88c90135e..8bec21ed0de5 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -40,6 +40,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -50,6 +51,7 @@ status = "okay"; m25p,fast-read; label = "pnor"; + spi-max-frequency = <100000000>; }; }; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 9870553919b7..4afa8662c4e8 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -55,6 +55,9 @@ phy-mode = "rgmii"; phy-handle = <ðphy1>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default>; }; &mac2 { @@ -62,6 +65,9 @@ phy-mode = "rgmii"; phy-handle = <ðphy2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; }; &mac3 { @@ -69,12 +75,141 @@ phy-mode = "rgmii"; phy-handle = <ðphy3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii4_default>; }; -&emmc { +&emmc_controller { status = "okay"; }; +&emmc { + non-removable; + bus-width = <4>; + max-frequency = <52000000>; +}; + &rtc { status = "okay"; }; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0xe0000>; // 896KB + label = "u-boot"; + }; + + u-boot-env@e0000 { + reg = <0xe0000 0x20000>; // 128KB + label = "u-boot-env"; + }; + + kernel@100000 { + reg = <0x100000 0x900000>; // 9MB + label = "kernel"; + }; + + rofs@a00000 { + reg = <0xa00000 0x2000000>; // 32MB + label = "rofs"; + }; + + rwfs@6000000 { + reg = <0x2a00000 0x1600000>; // 22MB + label = "rwfs"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&uart5 { + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&i2c0 { + status = "okay"; + + temp@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts index 521afbea2c5b..2c29ac037d32 100644 --- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -92,6 +92,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii2_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>, + <&syscon ASPEED_CLK_MAC2RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index d519d307aa2a..016bbcb99bb6 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -2,7 +2,7 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g5.dtsi" +#include "ast2500-facebook-netbmc-common.dtsi" / { model = "Facebook Backpack CMM BMC"; @@ -53,10 +53,6 @@ bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk"; }; - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; - ast-adc-hwmon { compatible = "iio-hwmon"; io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, @@ -64,39 +60,7 @@ }; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - -/* - * Update reset type to "system" (full chip) to fix warm reboot hang issue - * when reset type is set to default ("soc", gated by reset mask registers). - */ -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; -}; - -/* - * wdt2 is not used by Backpack CMM. - */ -&wdt2 { - status = "disabled"; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "facebook-bmc-flash-layout.dtsi" - }; -}; - &uart1 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default &pinctrl_ncts1_default @@ -107,8 +71,6 @@ }; &uart3 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default &pinctrl_ncts3_default @@ -123,17 +85,6 @@ &pinctrl_rxd4_default>; }; -&uart5 { - status = "okay"; -}; - -&mac1 { - status = "okay"; - no-hw-checksum; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - /* * I2C bus reserved for communication with COM-E. */ @@ -380,3 +331,18 @@ &ehci1 { status = "okay"; }; + +&vhub { + status = "disabled"; +}; + +&sdhci0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1_default>; +}; + +&sdhci1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts index c05478296446..88ce4ff9f47e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts @@ -2,7 +2,7 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g5.dtsi" +#include "ast2500-facebook-netbmc-common.dtsi" / { model = "Facebook Minipack 100 BMC"; @@ -76,35 +76,36 @@ stdout-path = &uart1; bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw"; }; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; }; -&wdt1 { +&wdt2 { status = "okay"; aspeed,reset-type = "system"; }; -&wdt2 { - status = "okay"; - aspeed,reset-type = "system"; +/* + * Both firmware flashes are 64MB on Minipack BMC. + */ +&fmc_flash0 { + partitions { + data0@1c00000 { + reg = <0x1c00000 0x2400000>; + }; + flash0@0 { + reg = <0x0 0x4000000>; + }; + }; }; -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "facebook-bmc-flash-layout.dtsi" +&fmc_flash1 { + partitions { + flash1@0 { + reg = <0x0 0x4000000>; + }; }; }; &uart1 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default &pinctrl_ncts1_default @@ -120,13 +121,6 @@ &pinctrl_rxd2_default>; }; -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default - &pinctrl_rxd3_default>; -}; - &uart4 { status = "okay"; pinctrl-names = "default"; @@ -134,17 +128,6 @@ &pinctrl_rxd4_default>; }; -&uart5 { - status = "okay"; -}; - -&mac1 { - status = "okay"; - no-hw-checksum; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - &i2c0 { status = "okay"; bus-frequency = <400000>; @@ -423,7 +406,3 @@ &i2c13 { status = "okay"; }; - -&vhub { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index 682f729ea25e..5d7cbd9164d4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -126,6 +126,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts index 4e09a9cf32b7..52933598aac6 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts @@ -2,7 +2,7 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g5.dtsi" +#include "ast2500-facebook-netbmc-common.dtsi" / { model = "Facebook YAMP 100 BMC"; @@ -23,47 +23,6 @@ stdout-path = &uart5; bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; }; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; -}; - -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - -/* - * Update reset type to "system" (full chip) to fix warm reboot hang issue - * when reset type is set to default ("soc", gated by reset mask registers). - */ -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; -}; - -/* - * wdt2 is not used by Yamp. - */ -&wdt2 { - status = "disabled"; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "facebook-bmc-flash-layout.dtsi" - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default>; }; &uart2 { @@ -73,23 +32,19 @@ &pinctrl_rxd2_default>; }; -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default - &pinctrl_rxd3_default>; -}; - -&uart5 { - status = "okay"; -}; - &mac0 { status = "okay"; use-ncsi; no-hw-checksum; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&mac1 { + status = "disabled"; }; &i2c0 { @@ -154,7 +109,3 @@ &i2c13 { status = "okay"; }; - -&vhub { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts new file mode 100644 index 000000000000..c1c9cd30f980 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -0,0 +1,972 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Rainier"; + compatible = "ibm,rainier-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@B8000000 { + no-map; + reg = <0xB8000000 0x04000000>; /* 64M */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 0)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 1)>; + }; + + ps2-presence { + label = "ps2-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 2)>; + }; + + ps3-presence { + label = "ps3-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 3)>; + }; + }; + +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + power-supply@68 { + compatible = "ibm,cffps2"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps2"; + reg = <0x69>; + }; + + power-supply@6a { + compatible = "ibm,cffps2"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps2"; + reg = <0x6b>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c6 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + tmp275@4b { + compatible = "ti,tmp275"; + reg = <0x4b>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; +}; + +&i2c7 { + status = "okay"; + + si7021-a20@20 { + compatible = "silabs,si7020"; + reg = <0x20>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c8 { + status = "okay"; + + ucd90320@b { + compatible = "ti,ucd90160"; + reg = <0x0b>; + }; + + ucd90320@c { + compatible = "ti,ucd90160"; + reg = <0x0c>; + }; + + ucd90320@11 { + compatible = "ti,ucd90160"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c9 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c10 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + power-supply@68 { + compatible = "ibm,cffps2"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps2"; + reg = <0x69>; + }; + + power-supply@6a { + compatible = "ibm,cffps2"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps2"; + reg = <0x6b>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; +}; + +&i2c6 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + tmp275@4b { + compatible = "ti,tmp275"; + reg = <0x4b>; + }; +}; + +&i2c7 { + status = "okay"; + + si7021-a20@20 { + compatible = "silabs,si7020"; + reg = <0x20>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; +}; + +&i2c8 { + status = "okay"; + + ucd90320@b { + compatible = "ti,ucd90160"; + reg = <0x0b>; + }; + + ucd90320@c { + compatible = "ti,ucd90160"; + reg = <0x0c>; + }; + + ucd90320@11 { + compatible = "ti,ucd90160"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c9 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; +}; + +&i2c10 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; +}; + +&i2c11 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c14 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c15 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&vuart1 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts index e9d714a46a60..c17bb7fce7ff 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -148,14 +148,48 @@ }; leds { - compatible = "gpio-leds"; + compatible = "gpio-leds"; - power { - label = "power"; - /* TODO: dummy gpio */ - gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; - }; + power { + label = "power"; + /* TODO: dummy gpio */ + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; + }; + + init-ok { + label = "init-ok"; + gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>; + }; + + front-memory { + label = "front-memory"; + gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>; + }; + + front-syshot { + label = "front-syshot"; + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; + }; + + front-syshealth { + label = "front-syshealth"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + }; + front-fan { + label = "front-fan"; + gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; + }; + + front-psu { + label = "front-psu"; + gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + label = "identify"; + gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>; + }; }; iio-hwmon-battery { @@ -239,6 +273,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; @@ -749,15 +786,6 @@ aspeed,external-nodes = <&gfx &lhc>; }; -&gpio { - pin_gpio_b7 { - gpio-hog; - gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; - output-high; - line-name = "BMC_INIT_OK"; - }; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts index 2337ee23f5c4..80c92e065a10 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts @@ -77,6 +77,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts index 22dade6393d0..1deb30ec912c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -69,6 +69,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts index d3695a32e8e0..c29e5f4d86ad 100644 --- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts @@ -133,6 +133,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts index 118eb8bbbf1b..084c455ad4cb 100644 --- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts @@ -139,6 +139,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts index de95112e2a04..42b37a204241 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts @@ -178,6 +178,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index e55cc454b17f..f7e935ede919 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -449,6 +449,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index b0cb34ccb135..eb4e93a57ff4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -87,6 +87,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -99,6 +100,7 @@ flash@0 { status = "okay"; m25p,fast-read; + spi-max-frequency = <50000000>; label = "pnor"; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 9628ecb879cf..edfa44fe1f75 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -112,6 +112,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -125,6 +126,7 @@ status = "okay"; m25p,fast-read; label = "pnor"; + spi-max-frequency = <100000000>; }; }; @@ -160,6 +162,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; }; &i2c1 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts index f67fef1ac5e1..b8fdd2a8a2c9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts @@ -322,6 +322,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; use-ncsi; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; }; &i2c2 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts new file mode 100644 index 000000000000..f02de4ab058c --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -0,0 +1,1195 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Tacoma"; + compatible = "ibm,tacoma-bmc", "aspeed,ast2600"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@ba000000 { + no-map; + reg = <0xb8000000 0x4000000>; /* 64M */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 7)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 3)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 5)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&emmc { + status = "okay"; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam0_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam0_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam0_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam0_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam0_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam0_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam0_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam0_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam1_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam1_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam1_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam1_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam1_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam1_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam1_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam1_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam1_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c102 = &cfam0_i2c2; + i2c103 = &cfam0_i2c3; + i2c104 = &cfam0_i2c4; + i2c105 = &cfam0_i2c5; + i2c106 = &cfam0_i2c6; + i2c107 = &cfam0_i2c7; + i2c108 = &cfam0_i2c8; + i2c109 = &cfam0_i2c9; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c200 = &cfam1_i2c0; + i2c201 = &cfam1_i2c1; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c204 = &cfam1_i2c4; + i2c205 = &cfam1_i2c5; + i2c206 = &cfam1_i2c6; + i2c207 = &cfam1_i2c7; + i2c208 = &cfam1_i2c8; + i2c209 = &cfam1_i2c9; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c212 = &cfam1_i2c12; + i2c213 = &cfam1_i2c13; + i2c214 = &cfam1_i2c14; + }; + +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + bmp: bmp280@77 { + compatible = "bosch,bmp280"; + reg = <0x77>; + #io-channel-cells = <1>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&uart1 { + status = "okay"; + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&uart5 { + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&vuart1 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + bmp: bmp280@77 { + compatible = "bosch,bmp280"; + reg = <0x77>; + #io-channel-cells = <1>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&pinctrl { + /* Hog these as no driver is probed for the entire LPC block */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpc_default>, + <&pinctrl_lsirq_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts index a27c88d23056..affd2c8743b1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts @@ -43,6 +43,10 @@ gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>; }; + power_green { + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + }; + id_blue { gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 31ea34e14c79..569dad93e162 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -200,6 +200,7 @@ status = "okay"; label = "bmc"; m25p,fast-read; + spi-max-frequency = <50000000>; partitions { #address-cells = < 1 >; @@ -224,6 +225,7 @@ status = "okay"; label = "alt-bmc"; m25p,fast-read; + spi-max-frequency = <50000000>; partitions { #address-cells = < 1 >; @@ -242,7 +244,6 @@ label = "alt-obmc-ubi"; }; }; - }; }; @@ -255,6 +256,7 @@ status = "okay"; label = "pnor"; m25p,fast-read; + spi-max-frequency = <100000000>; }; }; @@ -293,6 +295,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index 30624378316d..bc60ec291681 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -130,6 +130,7 @@ status = "okay"; label = "bmc"; m25p,fast-read; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -143,6 +144,7 @@ status = "okay"; label = "pnor"; m25p,fast-read; + spi-max-frequency = <100000000>; }; }; @@ -187,6 +189,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts index 33d704541de6..4a1ca8f5b6a7 100644 --- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -80,12 +80,18 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default &pinctrl_mdio1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; }; &mac1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii2_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>, + <&syscon ASPEED_CLK_MAC2RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index dffb595d30e4..46c0891aac5a 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -65,6 +65,7 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { @@ -100,6 +101,7 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -182,7 +184,7 @@ #reset-cells = <1>; pinctrl: pinctrl { - compatible = "aspeed,g4-pinctrl"; + compatible = "aspeed,ast2400-pinctrl"; }; p2a: p2a-control { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index e8feb8b66a2f..a259c63fff06 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -72,16 +72,19 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -97,11 +100,13 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -117,11 +122,13 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -215,7 +222,7 @@ #reset-cells = <1>; pinctrl: pinctrl { - compatible = "aspeed,g5-pinctrl"; + compatible = "aspeed,ast2500-pinctrl"; aspeed,external-nodes = <&gfx &lhc>; }; @@ -299,7 +306,7 @@ #gpio-cells = <2>; gpio-controller; compatible = "aspeed,ast2500-gpio"; - reg = <0x1e780000 0x1000>; + reg = <0x1e780000 0x200>; interrupts = <20>; gpio-ranges = <&pinctrl 0 0 232>; clocks = <&syscon ASPEED_CLK_APB>; @@ -307,6 +314,21 @@ #interrupt-cells = <2>; }; + sgpio: sgpio@1e780200 { + #gpio-cells = <2>; + compatible = "aspeed,ast2500-sgpio"; + gpio-controller; + interrupts = <40>; + reg = <0x1e780200 0x0100>; + clocks = <&syscon ASPEED_CLK_APB>; + interrupt-controller; + ngpios = <8>; + bus-frequency = <12000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgpm_default>; + status = "disabled"; + }; + rtc: rtc@1e781000 { compatible = "aspeed,ast2500-rtc"; reg = <0x1e781000 0x18>; @@ -379,6 +401,7 @@ interrupts = <8>; clocks = <&syscon ASPEED_CLK_APB>; no-loopback-test; + aspeed,sirq-polarity-sense = <&syscon 0x70 25>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index 5b8bf58e89cb..045ce66ca876 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -852,14 +852,9 @@ groups = "SD2"; }; - pinctrl_sd3_default: sd3_default { - function = "SD3"; - groups = "SD3"; - }; - pinctrl_emmc_default: emmc_default { - function = "SD3"; - groups = "EMMC"; + function = "EMMC"; + groups = "EMMCG4"; }; pinctrl_sgpm1_default: sgpm1_default { diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 3a1422f7c49c..5f6142d99eeb 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -12,7 +12,29 @@ interrupt-parent = <&gic>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; serial4 = &uart5; + serial5 = &vuart1; + serial6 = &vuart2; }; @@ -64,12 +86,113 @@ <0x40466000 0x2000>; }; + fmc: spi@1e620000 { + reg = < 0x1e620000 0xc4 + 0x20000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-fmc"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + spi1: spi@1e630000 { + reg = < 0x1e630000 0xc4 + 0x30000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + spi2: spi@1e631000 { + reg = < 0x1e631000 0xc4 + 0x50000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + + fsim0: fsi@1e79b000 { + compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + reg = <0x1e79b000 0x94>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi1_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + status = "disabled"; + }; + + fsim1: fsi@1e79b100 { + compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + reg = <0x1e79b100 0x94>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi2_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + status = "disabled"; + }; + }; + mdio0: mdio@1e650000 { compatible = "aspeed,ast2600-mdio"; reg = <0x1e650000 0x8>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio1_default>; }; mdio1: mdio@1e650008 { @@ -78,6 +201,8 @@ #address-cells = <1>; #size-cells = <0>; status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio2_default>; }; mdio2: mdio@1e650010 { @@ -86,6 +211,8 @@ #address-cells = <1>; #size-cells = <0>; status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio3_default>; }; mdio3: mdio@1e650018 { @@ -94,6 +221,8 @@ #address-cells = <1>; #size-cells = <0>; status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio4_default>; }; mac0: ftgmac@1e660000 { @@ -168,6 +297,32 @@ quality = <100>; }; + gpio0: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780000 0x800>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 208>; + ngpios = <208>; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1e780800 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780800 0x800>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 208 36>; + ngpios = <36>; + clocks = <&syscon ASPEED_CLK_APB1>; + interrupt-controller; + #interrupt-cells = <2>; + }; + rtc: rtc@1e781000 { compatible = "aspeed,ast2600-rtc"; reg = <0x1e781000 0x18>; @@ -175,6 +330,35 @@ status = "disabled"; }; + timer: timer@1e782000 { + compatible = "aspeed,ast2600-timer"; + reg = <0x1e782000 0x90>; + interrupts-extended = <&gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + clock-names = "PCLK"; + }; + + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>; + resets = <&lpc_reset 4>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>; + status = "disabled"; + }; + uart5: serial@1e784000 { compatible = "ns16550a"; reg = <0x1e784000 0x1000>; @@ -207,6 +391,93 @@ status = "disabled"; }; + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon"; + reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs1@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <1>; + status = "disabled"; + }; + kcs2: kcs2@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <2>; + status = "disabled"; + }; + kcs3: kcs3@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <3>; + status = "disabled"; + }; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + + kcs4: kcs4@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <4>; + status = "disabled"; + }; + + lpc_ctrl: lpc-ctrl@0 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x0 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@0 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + lhc: lhc@20 { + compatible = "aspeed,ast2600-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + + lpc_reset: reset-controller@18 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x18 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@c0 { + compatible = "aspeed,ast2600-ibt-bmc"; + reg = <0xc0 0x18>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + sdc: sdc@1e740000 { compatible = "aspeed,ast2600-sd-controller"; reg = <0x1e740000 0x100>; @@ -235,7 +506,7 @@ }; }; - emmc: sdc@1e750000 { + emmc_controller: sdc@1e750000 { compatible = "aspeed,ast2600-sd-controller"; reg = <0x1e750000 0x100>; #address-cells = <1>; @@ -244,7 +515,7 @@ clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>; status = "disabled"; - sdhci@1e750100 { + emmc: sdhci@1e750100 { compatible = "aspeed,ast2600-sdhci"; reg = <0x100 0x100>; sdhci,auto-cmd12; @@ -254,8 +525,320 @@ pinctrl-0 = <&pinctrl_emmc_default>; }; }; + + vuart1: serial@1e787000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e787000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + no-loopback-test; + status = "disabled"; + }; + + vuart2: serial@1e788000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e788000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + no-loopback-test; + status = "disabled"; + }; + + uart2: serial@1e78d000 { + compatible = "ns16550a"; + reg = <0x1e78d000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>; + resets = <&lpc_reset 5>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; + status = "disabled"; + }; + + uart3: serial@1e78e000 { + compatible = "ns16550a"; + reg = <0x1e78e000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>; + resets = <&lpc_reset 6>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; + status = "disabled"; + }; + + uart4: serial@1e78f000 { + compatible = "ns16550a"; + reg = <0x1e78f000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>; + resets = <&lpc_reset 7>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>; + status = "disabled"; + }; + + i2c: bus@1e78a000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; + }; + }; }; }; #include "aspeed-g6-pinctrl.dtsi" + +&i2c { + i2c0: i2c-bus@80 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "disabled"; + }; + + i2c1: i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x100 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + status = "disabled"; + }; + + i2c2: i2c-bus@180 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x180 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; + }; + + i2c3: i2c-bus@200 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x200 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; + }; + + i2c4: i2c-bus@280 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x280 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; + }; + + i2c5: i2c-bus@300 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x300 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; + }; + + i2c6: i2c-bus@380 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x380 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; + }; + + i2c7: i2c-bus@400 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x400 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; + }; + + i2c8: i2c-bus@480 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x480 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; + }; + + i2c9: i2c-bus@500 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x500 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "disabled"; + }; + + i2c10: i2c-bus@580 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x580 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + status = "disabled"; + }; + + i2c11: i2c-bus@600 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x600 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; + status = "disabled"; + }; + + i2c12: i2c-bus@680 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x680 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; + status = "disabled"; + }; + + i2c13: i2c-bus@700 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x700 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; + status = "disabled"; + }; + + i2c14: i2c-bus@780 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x780 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c15_default>; + status = "disabled"; + }; + + i2c15: i2c-bus@800 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x800 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c16_default>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi new file mode 100644 index 000000000000..7a395ba56512 --- /dev/null +++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2019 Facebook Inc. + +#include "aspeed-g5.dtsi" + +/ { + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&wdt2 { + status = "disabled"; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&fmc { + status = "okay"; + + fmc_flash0: flash@0 { + status = "okay"; + m25p,fast-read; + label = "spi0.0"; + +#include "facebook-bmc-flash-layout.dtsi" + }; + + fmc_flash1: flash@1 { + status = "okay"; + m25p,fast-read; + label = "spi0.1"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; + }; +}; + +&mac1 { + status = "okay"; + no-hw-checksum; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&rtc { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&sdmmc { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_default>; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/at91-kizbox2-2.dts new file mode 100644 index 000000000000..cab8b3579efa --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox2-2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with + * two head board + * + * Copyright (C) 2015 Overkiz SAS + * + * Authors: Antoine Aubert <a.aubert@overkiz.com> + * Kévin Raymond <k.raymond@overkiz.com> + */ +/dts-v1/; +#include "at91-kizbox2-common.dtsi" + +/ { + model = "Overkiz Kizbox 2 with two heads"; + compatible = "overkiz,kizbox2-2", "atmel,sama5d31", + "atmel,sama5d3", "atmel,sama5"; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi new file mode 100644 index 000000000000..af38253a6e7a --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox2_common.dtsi - Device Tree Include file for + * Overkiz Kizbox 2 family SoC + * + * Copyright (C) 2014-2018 Overkiz SAS + * + * Authors: Antoine Aubert <a.aubert@overkiz.com> + * Gaël Portay <g.portay@overkiz.com> + * Kévin Raymond <k.raymond@overkiz.com> + */ +#include "sama5d31.dtsi" + +/ { + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioE 27 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + wakeup-source; + }; + + reset { + label = "PB_RST"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + wakeup-source; + }; + + user { + label = "PB_USER"; + gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + linux,code = <0x101>; + wakeup-source; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "none"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&i2c1 { + status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vled_reg: LDO_REG3 { + regulator-name = "VLED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v3v8_rf_reg: LDO_REG4 { + regulator-name = "V3V8_RF"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + }; + }; + }; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&usart1 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&usart2 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 + &pinctrl_pwm0_pwmh1_1 + &pinctrl_pwm0_pwmh2_0>; + status = "okay"; +}; + +&adc0 { + atmel,adc-vref = <3333>; + status = "okay"; +}; + +&macb1 { + phy-mode = "rmii"; + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +/* WMBUS (inverted with IO in the latest schematic) */ +&pinctrl_usart0 { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; + +/* RTS */ +&pinctrl_usart1 { + atmel,pins = + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; + +/* IO (inverted with WMBUS in the latest schematic) */ +&pinctrl_usart2 { + atmel,pins = + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP + AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts deleted file mode 100644 index 86d821884bd4..000000000000 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board - * - * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> - */ -/dts-v1/; -#include "sama5d31.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Overkiz Kizbox 2"; - compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = &dbgu; - }; - - memory { - reg = <0x20000000 0x10000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - i2c1: i2c@f0018000 { - status = "okay"; - - pmic: act8865@5b { - compatible = "active-semi,act8865"; - reg = <0x5b>; - status = "okay"; - - regulators { - vcc_1v8_reg: DCDC_REG1 { - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_1v2_reg: DCDC_REG2 { - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_3v3_reg: DCDC_REG3 { - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vddfuse_reg: LDO_REG1 { - regulator-name = "FUSE_2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - vddana_reg: LDO_REG2 { - regulator-name = "VDDANA"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vled_reg: LDO_REG3 { - regulator-name = "VLED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - v3v8_rf_reg: LDO_REG4 { - regulator-name = "V3V8_RF"; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - regulator-always-on; - }; - }; - }; - }; - - tcb0: timer@f0010000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - usart0: serial@f001c000 { - status = "okay"; - }; - - usart1: serial@f0020000 { - status = "okay"; - }; - - pwm0: pwm@f002c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 - &pinctrl_pwm0_pwmh1_1 - &pinctrl_pwm0_pwmh2_0>; - status = "okay"; - }; - - adc0: adc@f8018000 { - atmel,adc-vref = <3333>; - status = "okay"; - }; - - usart2: serial@f8020000 { - status = "okay"; - }; - - macb1: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - dbgu: serial@ffffee00 { - status = "okay"; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - - usb1: ohci@600000 { - status = "okay"; - }; - - usb2: ehci@700000 { - status = "okay"; - }; - - ebi: ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - prog { - label = "PB_PROG"; - gpios = <&pioE 27 GPIO_ACTIVE_LOW>; - linux,code = <0x102>; - wakeup-source; - }; - - reset { - label = "PB_RST"; - gpios = <&pioE 29 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - wakeup-source; - }; - - user { - label = "PB_USER"; - gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; - linux,code = <0x101>; - wakeup-source; - }; - }; - - pwm_leds { - compatible = "pwm-leds"; - - blue { - label = "pwm:blue:user"; - pwms = <&pwm0 2 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - green { - label = "pwm:green:user"; - pwms = <&pwm0 1 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - red { - label = "pwm:red:user"; - pwms = <&pwm0 0 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; -}; diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts new file mode 100644 index 000000000000..8734e7f8939e --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board + * + * Copyright (C) 2018 Overkiz SAS + * + * Authors: Dorian Rocipon <d.rocipon@overkiz.com> + * Kevin Carli <k.carli@overkiz.com> + * Mickael Gardet <m.gardet@overkiz.com> + */ +/dts-v1/; +#include "at91-kizbox3_common.dtsi" + +/ { + model = "Overkiz KIZBOX3-HS"; + compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; + + pwm_leds { + status = "okay"; + + red { + status = "okay"; + }; + + green { + status = "okay"; + }; + + blue { + status = "okay"; + }; + + white { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_red + &pinctrl_led_white>; + status = "okay"; + + red { + label = "pio:red:user"; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + white { + label = "pio:white:user"; + gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default" , "default", "default", + "default", "default" ; + pinctrl-0 = <&pinctrl_key_gpio_default>; + pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>; + pinctrl-2 = <&pinctrl_pio_io_boot + &pinctrl_pio_io_reset + &pinctrl_pio_io_test_radio>; + pinctrl-3 = <&pinctrl_pio_zbe_test_radio + &pinctrl_pio_zbe_rst>; + pinctrl-4 = <&pinctrl_pio_input>; + + SW1 { + label = "SW1"; + gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; + linux,code = <0x101>; + wakeup-source; + }; + + SW2 { + label = "SW2"; + gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + wakeup-source; + }; + + SW3 { + label = "SW3"; + gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + wakeup-source; + }; + + SW7 { + label = "SW7"; + gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>; + linux,code = <0x107>; + wakeup-source; + }; + + SW8 { + label = "SW8"; + gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>; + linux,code = <0x108>; + wakeup-source; + }; + }; + + gpios { + compatible = "gpio"; + status = "okay"; + + rf_on { + label = "rf on"; + gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + wifi_on { + label = "wifi on"; + gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_test_radio { + label = "zbe test radio"; + gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_rst { + label = "zbe rst"; + gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_reset { + label = "io reset"; + gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_test_radio { + label = "io test radio"; + gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_0 { + label = "io boot 0"; + gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_1 { + label = "io boot 1"; + gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + verbose_bootloader { + label = "verbose bootloader"; + gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; + input; + }; + + nail_bed_detection { + label = "nail bed detection"; + gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>; + input; + }; + + id_usba { + label = "id usba"; + gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; + input; + }; + }; +}; + +&pioA { + pinctrl_key_gpio_default: key_gpio_default { + pinmux= <PIN_PA22__GPIO>, + <PIN_PA24__GPIO>, + <PIN_PA26__GPIO>, + <PIN_PA29__GPIO>, + <PIN_PA18__GPIO>; + bias-disable; + }; + + pinctrl_gpio { + pinctrl_pio_rf: gpio_rf { + pinmux = <PIN_PC19__GPIO>; + bias-disable; + }; + pinctrl_pio_wifi: gpio_wifi { + pinmux = <PIN_PC20__GPIO>; + bias-disable; + }; + pinctrl_pio_io_boot: gpio_io_boot { + pinmux = + <PIN_PC11__GPIO>, + <PIN_PC17__GPIO>; + bias-disable; + }; + pinctrl_pio_io_test_radio: gpio_io_test_radio { + pinmux = <PIN_PC9__GPIO>; + bias-disable; + }; + pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio { + pinmux = <PIN_PB21__GPIO>; + bias-disable; + }; + pinctrl_pio_zbe_rst: gpio_zbe_rst { + pinmux = <PIN_PB25__GPIO>; + bias-disable; + }; + /* stm32 reset must be open drain (internal pull up) */ + pinctrl_pio_io_reset: gpio_io_reset { + pinmux = <PIN_PB30__GPIO>; + bias-disable; + drive-open-drain = <1>; + output-low; + }; + pinctrl_pio_input: gpio_input { + pinmux = + <PIN_PB11__GPIO>, + <PIN_PB12__GPIO>, + <PIN_PC0__GPIO>; + bias-disable; + }; + }; + + pinctrl_leds { + pinctrl_led_red: led_red { + pinmux = <PIN_PB1__GPIO>; + bias-disable; + }; + pinctrl_led_white: led_white { + pinmux = <PIN_PB8__GPIO>; + bias-disable; + }; + }; +}; + +&adc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&flx0 { + status = "okay"; + + uart5: serial@200 { + status = "okay"; + }; +}; + +&flx3 { + status = "okay"; + uart6: serial@200 { + status = "okay"; + }; +}; + +&flx4 { + status = "okay"; + + i2c2: i2c@600 { + status = "okay"; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi new file mode 100644 index 000000000000..299e74d23184 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3 + * family SoC boards + * + * Copyright (C) 2018 Overkiz SAS + * + * Authors: Dorian Rocipon <d.rocipon@overkiz.com> + * Kevin Carli <k.carli@overkiz.com> + * Mickael Gardet <m.gardet@overkiz.com> + */ +/dts-v1/; +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox3"; + compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + }; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = "serial1:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + vdd_adc_vddana: supply_3v3_ana { + compatible = "regulator-fixed"; + regulator-name = "adc-vddana"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_adc_vref: supply_3v3_ref { + compatible = "regulator-fixed"; + regulator-name = "adc-vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pwm_leds { + compatible = "pwm-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm_h0 + &pinctrl_pwm0_pwm_h1 + &pinctrl_pwm0_pwm_h2 + &pinctrl_pwm0_pwm_h3>; + status = "disabled"; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + status = "disabled"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + status = "disabled"; + }; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + status = "disabled"; + }; + + white { + label = "pwm:white:user"; + pwms = <&pwm0 3 10000000 0>; + max-brightness = <255>; + status = "disabled"; + }; + }; +}; + +&ebi { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@3 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + reg = <0x3 0x0 0x800000>; + + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + u-boot@20000 { + label = "u-boot"; + reg = <0x20000 0x140000>; + }; + + u-boot-factory@160000 { + label = "u-boot-factory"; + reg = <0x160000 0x140000>; + }; + + ubi@2A0000 { + label = "ubi"; + reg = <0x2A0000 0x7D60000>; + }; + }; + + }; +}; + +&rtc { + status = "okay"; +}; + +&pioA { + pinctrl_ebi_nand_addr: ebi-addr-1 { + pinmux = <PIN_PA0__D0>, + <PIN_PA1__D1>, + <PIN_PA2__D2>, + <PIN_PA3__D3>, + <PIN_PA4__D4>, + <PIN_PA5__D5>, + <PIN_PA6__D6>, + <PIN_PA7__D7>, + <PIN_PA8__NWE_NANDWE>, + <PIN_PA9__NCS3>, + <PIN_PA10__A21_NANDALE>, + <PIN_PA11__A22_NANDCLE>, + <PIN_PA21__NANDRDY>; + bias-disable; + }; + + pinctrl_usart { + pinctrl_usart_0: usart0-0 { + pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>; + bias-disable; + }; + pinctrl_usart_1: usart1-0 { + pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>; + bias-disable; + }; + pinctrl_usart_2: usart2-0 { + pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>; + bias-disable; + }; + pinctrl_usart_3: usart3-0 { + pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>; + bias-disable; + }; + pinctrl_usart_4: usart4-0 { + pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>; + bias-disable; + }; + pinctrl_flx0_default: flx0_usart_default { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX + <PIN_PB29__FLEXCOM0_IO1>; //RX + bias-disable; + }; + pinctrl_flx3_default: flx3_usart_default { + pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX + <PIN_PB23__FLEXCOM3_IO0>; //TX + bias-disable; + }; + }; + + pinctrl_flx4_default: flx4_i2c2_default { + pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA + <PIN_PD13__FLEXCOM4_IO1>; //CLK + bias-disable; + drive-open-drain = <1>; + }; + + pinctrl_pwm0 { + pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 { + pinmux = <PIN_PA30__PWMH0>; + bias-disable; + }; + pinctrl_pwm0_pwm_h1: pwm0_pwmh1 { + pinmux = <PIN_PB0__PWMH1>; + bias-disable; + }; + pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 { + pinmux = <PIN_PB5__PWMH2>; + bias-disable; + }; + pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 { + pinmux = <PIN_PB7__PWMH3>; + bias-disable; + }; + }; + + pinctrl_adc { + pinctrl_adc2: adc2 { + pinmux = <PIN_PD21__GPIO>; + bias-disable; + }; + pinctrl_adc3: adc3 { + pinmux = <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_adc4: adc4 { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; + pinctrl_adc5: adc5 { + pinmux = <PIN_PD24__GPIO>; + bias-disable; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_0>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +/* debug uart */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_1>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_2>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_3>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&flx0 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "disabled"; + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x400>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <32>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; +}; + +&flx3 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "disabled"; + + uart6: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x400>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx3_default>; + atmel,fifo-size = <32>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; +}; + +&flx4 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "disabled"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "disabled"; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; +}; + +&watchdog { + status = "okay"; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc2 + &pinctrl_adc3 + &pinctrl_adc4 + &pinctrl_adc5>; + + vddana-supply = <&vdd_adc_vddana>; + vref-supply = <&vdd_adc_vref>; + status = "disabled"; +}; + +&securam { + export; + + /* export overkiz u-boot mode/version and factory */ + uboot@1400 { + reg = <0x1400 0x20>; + export; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 89f0c9979b89..fca5716ce44f 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -53,6 +53,7 @@ sdmmc0: sdio-host@a0000000 { bus-width = <8>; + mmc-ddr-3_3v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 808e399fd39a..9d0a7fbea725 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -334,6 +334,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; status = "okay"; }; }; @@ -342,6 +345,9 @@ dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_default>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; status = "okay"; at24@54 { diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index fdfc37d716e0..924d9491780d 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -49,6 +49,7 @@ }; i2c0: i2c@f8014000 { + i2c-digital-filter; status = "okay"; }; diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts index e0c0291ac9fd..e0515043d145 100644 --- a/arch/arm/boot/dts/atlas7-evb.dts +++ b/arch/arm/boot/dts/atlas7-evb.dts @@ -119,7 +119,7 @@ label = "rearview key"; linux,code = <KEY_CAMERA>; gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>; - debounce_interval = <100>; + debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index e4d49731287f..6142c672811e 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -268,7 +268,7 @@ clock-frequency = <100000>; }; - watchdog@39000 { + watchdog: watchdog@39000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x39000 0x1000>; interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts new file mode 100644 index 000000000000..cccc1ccd19be --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-usb-peripheral.dtsi" + +/ { + compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; + model = "Raspberry Pi 4 Model B"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0>; + }; + + leds { + act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + }; + + sd_io_1v8_reg: sd_io_1v8_reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + status = "okay"; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "GLOBAL_RESET", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "", + ""; + status = "okay"; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; + status = "okay"; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* EMMC2 is used to drive the SD card */ +&emmc2 { + vqmmc-supply = <&sd_io_1v8_reg>; + broken-cd; + status = "okay"; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; + }; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&vchiq { + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi new file mode 100644 index 000000000000..ac83dac2e6ba --- /dev/null +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -0,0 +1,844 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm283x.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/bcm2835-pm.h> + +/ { + compatible = "brcm,bcm2711"; + + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gicv2>; + + soc { + /* + * Defined ranges: + * Common BCM283x peripherals + * BCM2711-specific peripherals + * ARM-local peripherals + */ + ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, + <0x7c000000 0x0 0xfc000000 0x02000000>, + <0x40000000 0x0 0xff800000 0x00800000>; + /* Emulate a contiguous 30-bit address range for DMA */ + dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; + + /* + * This node is the provider for the enable-method for + * bringing up secondary cores. + */ + local_intc: local_intc@40000000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + }; + + gicv2: interrupt-controller@40041000 { + interrupt-controller; + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + reg = <0x40041000 0x1000>, + <0x40042000 0x2000>, + <0x40044000 0x2000>, + <0x40046000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xb00>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + /* DMA lite 7 - 10 */ + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x07f5>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>, + <0x7ec11000 0x20>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + rng@7e104000 { + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + + /* RNG is incompatible with brcm,bcm2835-rng */ + status = "disabled"; + }; + + uart2: serial@7e201400 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201400 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart3: serial@7e201600 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201600 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart4: serial@7e201800 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201800 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart5: serial@7e201a00 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201a00 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + spi3: spi@7e204600 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204600 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@7e204800 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204800 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@7e204a00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204a00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@7e204c00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204c00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@7e205600 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205600 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@7e205800 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205800 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@7e205a00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205a00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@7e205c00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205c00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm1: pwm@7e20c800 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c800 0x28>; + clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clock-rates = <10000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + emmc2: emmc2@7e340000 { + compatible = "brcm,bcm2711-emmc2"; + reg = <0x7e340000 0x100>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2711_CLOCK_EMMC2>; + status = "disabled"; + }; + + hvs@7e400000 { + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + /* This only applies to the ARMv7 stub */ + arm,cpu-registers-not-fw-configured; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000d8>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e0>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e8>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000f0>; + }; + }; +}; + +&clk_osc { + clock-frequency = <54000000>; +}; + +&clocks { + compatible = "brcm,bcm2711-cprman"; +}; + +&cpu_thermal { + coefficients = <(-487) 410040>; +}; + +&dsi0 { + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; +}; + +&dsi1 { + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio { + compatible = "brcm,bcm2711-gpio"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + + gpclk0_gpio49: gpclk0_gpio49 { + pin-gpclk { + pins = "gpio49"; + function = "alt1"; + bias-disable; + }; + }; + gpclk1_gpio50: gpclk1_gpio50 { + pin-gpclk { + pins = "gpio50"; + function = "alt1"; + bias-disable; + }; + }; + gpclk2_gpio51: gpclk2_gpio51 { + pin-gpclk { + pins = "gpio51"; + function = "alt1"; + bias-disable; + }; + }; + + i2c0_gpio46: i2c0_gpio46 { + pin-sda { + function = "alt0"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt0"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c1_gpio46: i2c1_gpio46 { + pin-sda { + function = "alt1"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt1"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c3_gpio2: i2c3_gpio2 { + pin-sda { + function = "alt5"; + pins = "gpio2"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio3"; + bias-disable; + }; + }; + i2c3_gpio4: i2c3_gpio4 { + pin-sda { + function = "alt5"; + pins = "gpio4"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio5"; + bias-disable; + }; + }; + i2c4_gpio6: i2c4_gpio6 { + pin-sda { + function = "alt5"; + pins = "gpio6"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio7"; + bias-disable; + }; + }; + i2c4_gpio8: i2c4_gpio8 { + pin-sda { + function = "alt5"; + pins = "gpio8"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio9"; + bias-disable; + }; + }; + i2c5_gpio10: i2c5_gpio10 { + pin-sda { + function = "alt5"; + pins = "gpio10"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio11"; + bias-disable; + }; + }; + i2c5_gpio12: i2c5_gpio12 { + pin-sda { + function = "alt5"; + pins = "gpio12"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio13"; + bias-disable; + }; + }; + i2c6_gpio0: i2c6_gpio0 { + pin-sda { + function = "alt5"; + pins = "gpio0"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio1"; + bias-disable; + }; + }; + i2c6_gpio22: i2c6_gpio22 { + pin-sda { + function = "alt5"; + pins = "gpio22"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio23"; + bias-disable; + }; + }; + i2c_slave_gpio8: i2c_slave_gpio8 { + pins-i2c-slave { + pins = "gpio8", + "gpio9", + "gpio10", + "gpio11"; + function = "alt3"; + }; + }; + + jtag_gpio48: jtag_gpio48 { + pins-jtag { + pins = "gpio48", + "gpio49", + "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt4"; + }; + }; + + mii_gpio28: mii_gpio28 { + pins-mii { + pins = "gpio28", + "gpio29", + "gpio30", + "gpio31"; + function = "alt4"; + }; + }; + mii_gpio36: mii_gpio36 { + pins-mii { + pins = "gpio36", + "gpio37", + "gpio38", + "gpio39"; + function = "alt5"; + }; + }; + + pcm_gpio50: pcm_gpio50 { + pins-pcm { + pins = "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt2"; + }; + }; + + pwm0_0_gpio12: pwm0_0_gpio12 { + pin-pwm { + pins = "gpio12"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio18: pwm0_0_gpio18 { + pin-pwm { + pins = "gpio18"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_0_gpio40: pwm1_0_gpio40 { + pin-pwm { + pins = "gpio40"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio13: pwm0_1_gpio13 { + pin-pwm { + pins = "gpio13"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio19: pwm0_1_gpio19 { + pin-pwm { + pins = "gpio19"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_1_gpio41: pwm1_1_gpio41 { + pin-pwm { + pins = "gpio41"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio45: pwm0_1_gpio45 { + pin-pwm { + pins = "gpio45"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio52: pwm0_0_gpio52 { + pin-pwm { + pins = "gpio52"; + function = "alt1"; + bias-disable; + }; + }; + pwm0_1_gpio53: pwm0_1_gpio53 { + pin-pwm { + pins = "gpio53"; + function = "alt1"; + bias-disable; + }; + }; + + rgmii_gpio35: rgmii_gpio35 { + pin-start-stop { + pins = "gpio35"; + function = "alt4"; + }; + pin-rx-ok { + pins = "gpio36"; + function = "alt4"; + }; + }; + rgmii_irq_gpio34: rgmii_irq_gpio34 { + pin-irq { + pins = "gpio34"; + function = "alt5"; + }; + }; + rgmii_irq_gpio39: rgmii_irq_gpio39 { + pin-irq { + pins = "gpio39"; + function = "alt4"; + }; + }; + rgmii_mdio_gpio28: rgmii_mdio_gpio28 { + pins-mdio { + pins = "gpio28", + "gpio29"; + function = "alt5"; + }; + }; + rgmii_mdio_gpio37: rgmii_mdio_gpio37 { + pins-mdio { + pins = "gpio37", + "gpio38"; + function = "alt4"; + }; + }; + + spi0_gpio46: spi0_gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49"; + function = "alt2"; + }; + }; + spi2_gpio46: spi2_gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49", + "gpio50"; + function = "alt5"; + }; + }; + spi3_gpio0: spi3_gpio0 { + pins-spi { + pins = "gpio0", + "gpio1", + "gpio2", + "gpio3"; + function = "alt3"; + }; + }; + spi4_gpio4: spi4_gpio4 { + pins-spi { + pins = "gpio4", + "gpio5", + "gpio6", + "gpio7"; + function = "alt3"; + }; + }; + spi5_gpio12: spi5_gpio12 { + pins-spi { + pins = "gpio12", + "gpio13", + "gpio14", + "gpio15"; + function = "alt3"; + }; + }; + spi6_gpio18: spi6_gpio18 { + pins-spi { + pins = "gpio18", + "gpio19", + "gpio20", + "gpio21"; + function = "alt3"; + }; + }; + + uart2_gpio0: uart2_gpio0 { + pin-tx { + pins = "gpio0"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio1"; + function = "alt4"; + bias-pull-up; + }; + }; + uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { + pin-cts { + pins = "gpio2"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio3"; + function = "alt4"; + bias-disable; + }; + }; + uart3_gpio4: uart3_gpio4 { + pin-tx { + pins = "gpio4"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio5"; + function = "alt4"; + bias-pull-up; + }; + }; + uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { + pin-cts { + pins = "gpio6"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio7"; + function = "alt4"; + bias-disable; + }; + }; + uart4_gpio8: uart4_gpio8 { + pin-tx { + pins = "gpio8"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio9"; + function = "alt4"; + bias-pull-up; + }; + }; + uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { + pin-cts { + pins = "gpio10"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio11"; + function = "alt4"; + bias-disable; + }; + }; + uart5_gpio12: uart5_gpio12 { + pin-tx { + pins = "gpio12"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio13"; + function = "alt4"; + bias-pull-up; + }; + }; + uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { + pin-cts { + pins = "gpio14"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio15"; + function = "alt4"; + bias-disable; + }; + }; +}; + +&i2c0 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c1 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mailbox { + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhci { + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhost { + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi { + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi2 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&system_timer { + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; +}; + +&txp { + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart0 { + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; +}; + +&vec { + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi new file mode 100644 index 000000000000..fe1ab40c7f22 --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This include file covers the common peripherals and configuration between + * bcm2835, bcm2836 and bcm2837 implementations. + */ + +/ { + interrupt-parent = <&intc>; + + soc { + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + /* dma channel 11-14 share one irq */ + <1 27>, + <1 27>, + <1 27>, + <1 27>, + /* unused shared irq for all channels */ + <1 28>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11", + "dma12", + "dma13", + "dma14", + "dma-shared-all"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; + }; + + intc: interrupt-controller@7e00b200 { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + pixelvalve@7e206000 { + compatible = "brcm,bcm2835-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <2 13>; /* pwa0 */ + }; + + pixelvalve@7e207000 { + compatible = "brcm,bcm2835-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <2 14>; /* pwa1 */ + }; + + thermal: thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@7e805000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e805000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; + }; + + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; + }; +}; + +&cpu_thermal { + thermal-sensors = <&thermal>; +}; + +&gpio { + i2c_slave_gpio18: i2c_slave_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + jtag_gpio4: jtag_gpio4 { + brcm,pins = <4 5 6 12 13>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + + pwm0_gpio12: pwm0_gpio12 { + brcm,pins = <12>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm0_gpio18: pwm0_gpio18 { + brcm,pins = <18>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm0_gpio40: pwm0_gpio40 { + brcm,pins = <40>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio13: pwm1_gpio13 { + brcm,pins = <13>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio19: pwm1_gpio19 { + brcm,pins = <19>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm1_gpio41: pwm1_gpio41 { + brcm,pins = <41>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio45: pwm1_gpio45 { + brcm,pins = <45>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&i2s { + dmas = <&dma 2>, <&dma 3>; + dma-names = "tx", "rx"; +}; + +&sdhost { + dmas = <&dma 13>; + dma-names = "rx-tx"; +}; + +&spi { + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 6c6a7f620d8b..394c8a71b13b 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -59,10 +59,6 @@ clock-frequency = <100000>; }; -&i2c2 { - status = "okay"; -}; - &usb { power-domains = <&power RPI_POWER_DOMAIN_USB>; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index a5c3824c8056..53bf4579cc22 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" / { compatible = "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index c933e8413884..82d6c4662ae4 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" / { compatible = "brcm,bcm2836"; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index beb6c502dadc..9e95fee78e19 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -1,4 +1,5 @@ #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" / { compatible = "brcm,bcm2837"; diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi new file mode 100644 index 000000000000..0ff0e9e25327 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +&usb { + dr_mode = "peripheral"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 2d191fcbc2cc..3caaa57eb6c8 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -18,7 +18,6 @@ / { compatible = "brcm,bcm2835"; model = "BCM2835"; - interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; @@ -36,8 +35,6 @@ polling-delay-passive = <0>; polling-delay = <1000>; - thermal-sensors = <&thermal>; - trips { cpu-crit { temperature = <80000>; @@ -56,7 +53,7 @@ #address-cells = <1>; #size-cells = <1>; - timer@7e003000 { + system_timer: timer@7e003000 { compatible = "brcm,bcm2835-system-timer"; reg = <0x7e003000 0x1000>; interrupts = <1 0>, <1 1>, <1 2>, <1 3>; @@ -67,74 +64,12 @@ clock-frequency = <1000000>; }; - txp@7e004000 { + txp: txp@7e004000 { compatible = "brcm,bcm2835-txp"; reg = <0x7e004000 0x20>; interrupts = <1 11>; }; - dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xf00>; - interrupts = <1 16>, - <1 17>, - <1 18>, - <1 19>, - <1 20>, - <1 21>, - <1 22>, - <1 23>, - <1 24>, - <1 25>, - <1 26>, - /* dma channel 11-14 share one irq */ - <1 27>, - <1 27>, - <1 27>, - <1 27>, - /* unused shared irq for all channels */ - <1 28>; - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10", - "dma11", - "dma12", - "dma13", - "dma14", - "dma-shared-all"; - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7f35>; - }; - - intc: interrupt-controller@7e00b200 { - compatible = "brcm,bcm2835-armctrl-ic"; - reg = <0x7e00b200 0x200>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; - #reset-cells = <1>; - reg = <0x7e100000 0x114>, - <0x7e00a000 0x24>; - clocks = <&clocks BCM2835_CLOCK_V3D>, - <&clocks BCM2835_CLOCK_PERI_IMAGE>, - <&clocks BCM2835_CLOCK_H264>, - <&clocks BCM2835_CLOCK_ISP>; - clock-names = "v3d", "peri_image", "h264", "isp"; - system-power-controller; - }; - clocks: cprman@7e101000 { compatible = "brcm,bcm2835-cprman"; #clock-cells = <1>; @@ -184,8 +119,7 @@ interrupt-controller; #interrupt-cells = <2>; - /* Defines pin muxing groups according to - * BCM2835-ARM-Peripherals.pdf page 102. + /* Defines common pin muxing groups * * While each pin can have its mux selected * for various functions individually, some @@ -263,15 +197,7 @@ brcm,pins = <44 45>; brcm,function = <BCM2835_FSEL_ALT2>; }; - i2c_slave_gpio18: i2c_slave_gpio18 { - brcm,pins = <18 19 20 21>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - jtag_gpio4: jtag_gpio4 { - brcm,pins = <4 5 6 12 13>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; jtag_gpio22: jtag_gpio22 { brcm,pins = <22 23 24 25 26 27>; brcm,function = <BCM2835_FSEL_ALT4>; @@ -286,35 +212,6 @@ brcm,function = <BCM2835_FSEL_ALT2>; }; - pwm0_gpio12: pwm0_gpio12 { - brcm,pins = <12>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm0_gpio18: pwm0_gpio18 { - brcm,pins = <18>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm0_gpio40: pwm0_gpio40 { - brcm,pins = <40>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio13: pwm1_gpio13 { - brcm,pins = <13>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio19: pwm1_gpio19 { - brcm,pins = <19>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm1_gpio41: pwm1_gpio41 { - brcm,pins = <41>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio45: pwm1_gpio45 { - brcm,pins = <45>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - sdhost_gpio48: sdhost_gpio48 { brcm,pins = <48 49 50 51 52 53>; brcm,function = <BCM2835_FSEL_ALT0>; @@ -396,7 +293,7 @@ }; uart0: serial@7e201000 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; + compatible = "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x200>; interrupts = <2 25>; clocks = <&clocks BCM2835_CLOCK_UART>, @@ -410,8 +307,6 @@ reg = <0x7e202000 0x100>; interrupts = <2 24>; clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 13>; - dma-names = "rx-tx"; status = "disabled"; }; @@ -419,10 +314,6 @@ compatible = "brcm,bcm2835-i2s"; reg = <0x7e203000 0x24>; clocks = <&clocks BCM2835_CLOCK_PCM>; - - dmas = <&dma 2>, - <&dma 3>; - dma-names = "tx", "rx"; status = "disabled"; }; @@ -431,8 +322,6 @@ reg = <0x7e204000 0x200>; interrupts = <2 22>; clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 6>, <&dma 7>; - dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -448,18 +337,6 @@ status = "disabled"; }; - pixelvalve@7e206000 { - compatible = "brcm,bcm2835-pixelvalve0"; - reg = <0x7e206000 0x100>; - interrupts = <2 13>; /* pwa0 */ - }; - - pixelvalve@7e207000 { - compatible = "brcm,bcm2835-pixelvalve1"; - reg = <0x7e207000 0x100>; - interrupts = <2 14>; /* pwa1 */ - }; - dpi: dpi@7e208000 { compatible = "brcm,bcm2835-dpi"; reg = <0x7e208000 0x8c>; @@ -490,14 +367,6 @@ }; - thermal: thermal@7e212000 { - compatible = "brcm,bcm2835-thermal"; - reg = <0x7e212000 0x8>; - clocks = <&clocks BCM2835_CLOCK_TSENS>; - #thermal-sensor-cells = <0>; - status = "disabled"; - }; - aux: aux@7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; @@ -587,16 +456,6 @@ status = "disabled"; }; - i2c2: i2c@7e805000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e805000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - vec: vec@7e806000 { compatible = "brcm,bcm2835-vec"; reg = <0x7e806000 0x1000>; @@ -605,26 +464,6 @@ status = "disabled"; }; - pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; - interrupts = <2 10>; /* pixelvalve */ - }; - - hdmi: hdmi@7e902000 { - compatible = "brcm,bcm2835-hdmi"; - reg = <0x7e902000 0x600>, - <0x7e808000 0x100>; - interrupts = <2 8>, <2 9>; - ddc = <&i2c2>; - clocks = <&clocks BCM2835_PLLH_PIX>, - <&clocks BCM2835_CLOCK_HSM>; - clock-names = "pixel", "hdmi"; - dmas = <&dma 17>; - dma-names = "audio-rx"; - status = "disabled"; - }; - usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; @@ -636,36 +475,19 @@ phys = <&usbphy>; phy-names = "usb2-phy"; }; - - v3d: v3d@7ec00000 { - compatible = "brcm,bcm2835-v3d"; - reg = <0x7ec00000 0x1000>; - interrupts = <1 10>; - power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; - }; - - vc4: gpu { - compatible = "brcm,bcm2835-vc4"; - }; }; clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - /* The oscillator is the root of the clock tree. */ - clk_osc: clock@3 { + clk_osc: clk-osc { compatible = "fixed-clock"; - reg = <3>; #clock-cells = <0>; clock-output-names = "osc"; clock-frequency = <19200000>; }; - clk_usb: clock@4 { + clk_usb: clk-usb { compatible = "fixed-clock"; - reg = <4>; #clock-cells = <0>; clock-output-names = "otg"; clock-frequency = <480000000>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts new file mode 100644 index 000000000000..334325390aed --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2019 Legrand AV Inc. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWC-2000 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 2e8a3977219f..3081b04e8c08 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -784,7 +784,7 @@ status = "disabled"; }; - crypto_sram: sa-sram@ffffe000 { + crypto_sram: sram@ffffe000 { compatible = "mmio-sram"; reg = <0xffffe000 0x800>; clocks = <&gate_clk 15>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 5cac2dd58241..bbf1c6db50e0 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -442,7 +442,6 @@ target-module@f4000 { /* 0x4a0f4000, ap 23 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox1"; reg = <0xf4000 0x4>, <0xf4010 0x4>; reg-names = "rev", "sysc"; @@ -1899,7 +1898,6 @@ target-module@90000 { /* 0x48090000, ap 55 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "rng"; reg = <0x91fe0 0x4>, <0x91fe4 0x4>; reg-names = "rev", "sysc"; @@ -2090,7 +2088,6 @@ target-module@b2000 { /* 0x480b2000, ap 37 52.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hdq1w"; reg = <0xb2000 0x4>, <0xb2014 0x4>, <0xb2018 0x4>; @@ -3079,6 +3076,58 @@ phys = <&phy_gmii_sel 2>; }; }; + + mac_sw: switch@0 { + compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch"; + reg = <0x0 0x4000>; + ranges = <0 0 0x4000>; + clocks = <&gmac_main_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + syscon = <&scm_conf>; + status = "disabled"; + + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx_thresh", "rx", "tx", "misc"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + label = "port1"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; + + cpsw_port2: port@2 { + reg = <2>; + label = "port2"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; + }; + }; + + davinci_mdio_sw: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&gmac_main_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + }; + + cpts { + clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>; + clock-names = "cpts"; + }; + }; }; }; }; @@ -3199,7 +3248,6 @@ target-module@2000 { /* 0x48802000, ap 95 7c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox13"; reg = <0x2000 0x4>, <0x2010 0x4>; reg-names = "rev", "sysc"; @@ -3528,7 +3576,6 @@ target-module@3a000 { /* 0x4883a000, ap 33 3e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox2"; reg = <0x3a000 0x4>, <0x3a010 0x4>; reg-names = "rev", "sysc"; @@ -3559,7 +3606,6 @@ target-module@3c000 { /* 0x4883c000, ap 35 3a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox3"; reg = <0x3c000 0x4>, <0x3c010 0x4>; reg-names = "rev", "sysc"; @@ -3590,7 +3636,6 @@ target-module@3e000 { /* 0x4883e000, ap 37 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox4"; reg = <0x3e000 0x4>, <0x3e010 0x4>; reg-names = "rev", "sysc"; @@ -3621,7 +3666,6 @@ target-module@40000 { /* 0x48840000, ap 39 64.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox5"; reg = <0x40000 0x4>, <0x40010 0x4>; reg-names = "rev", "sysc"; @@ -3652,7 +3696,6 @@ target-module@42000 { /* 0x48842000, ap 41 4e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox6"; reg = <0x42000 0x4>, <0x42010 0x4>; reg-names = "rev", "sysc"; @@ -3683,7 +3726,6 @@ target-module@44000 { /* 0x48844000, ap 43 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox7"; reg = <0x44000 0x4>, <0x44010 0x4>; reg-names = "rev", "sysc"; @@ -3714,7 +3756,6 @@ target-module@46000 { /* 0x48846000, ap 45 48.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox8"; reg = <0x46000 0x4>, <0x46010 0x4>; reg-names = "rev", "sysc"; @@ -3833,7 +3874,6 @@ target-module@5e000 { /* 0x4885e000, ap 69 6c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox9"; reg = <0x5e000 0x4>, <0x5e010 0x4>; reg-names = "rev", "sysc"; @@ -3864,7 +3904,6 @@ target-module@60000 { /* 0x48860000, ap 71 4a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox10"; reg = <0x60000 0x4>, <0x60010 0x4>; reg-names = "rev", "sysc"; @@ -3895,7 +3934,6 @@ target-module@62000 { /* 0x48862000, ap 73 74.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox11"; reg = <0x62000 0x4>, <0x62010 0x4>; reg-names = "rev", "sysc"; @@ -3926,7 +3964,6 @@ target-module@64000 { /* 0x48864000, ap 67 52.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox12"; reg = <0x64000 0x4>, <0x64010 0x4>; reg-names = "rev", "sysc"; @@ -4301,7 +4338,6 @@ target-module@4000 { /* 0x4ae14000, ap 7 28.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x4000 0x4>, <0x4010 0x4>, <0x4014 0x4>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 953f0ffce2a9..73e5011f531a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -763,3 +763,54 @@ #include "dra7-l4.dtsi" #include "dra7xx-clocks.dtsi" + +&prm { + prm_dsp1: prm@400 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_ipu: prm@500 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x500 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_iva: prm@f00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + }; + + prm_dsp2: prm@1b00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + }; + + prm_eve1: prm@1b40 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b40 0x40>; + }; + + prm_eve2: prm@1b80 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b80 0x40>; + }; + + prm_eve3: prm@1bc0 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1bc0 0x40>; + }; + + prm_eve4: prm@1c00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c00 0x60>; + }; +}; diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi new file mode 100644 index 000000000000..6472b056a001 --- /dev/null +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + * and + * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd + * + * Netronix E60K02 board common. + * This board is equipped with different SoCs and + * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and + * the Tolino Shine 3 (with i.MX6SL) + */ +#include <dt-bindings/input/input.h> + +/ { + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + cover { + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + on { + label = "e60k02:white:on"; + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + + lm3630a: backlight@36 { + reg = <0x36>; + compatible = "ti,lm3630a"; + enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0>; + label = "backlight_warm"; + default-brightness = <0>; + max-brightness = <255>; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + label = "backlight_cold"; + default-brightness = <0>; + max-brightness = <255>; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + /* TODO: CYTTSP5 touch controller at 0x24 */ + + /* TODO: TPS65185 PMIC for E Ink at 0x68 */ + +}; + +&i2c3 { + clock-frequency = <100000>; + status = "okay"; + + ricoh619: pmic@32 { + compatible = "ricoh,rc5t619"; + reg = <0x32>; + system-power-controller; + + regulators { + dcdc1_reg: DCDC1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <900000>; + regulator-suspend-min-microvolt = <900000>; + }; + }; + + /* Core3_3V3 */ + dcdc2_reg: DCDC2 { + regulator-name = "DCDC2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3300000>; + regulator-suspend-min-microvolt = <3300000>; + }; + }; + + dcdc3_reg: DCDC3 { + regulator-name = "DCDC3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V2 */ + dcdc4_reg: DCDC4 { + regulator-name = "DCDC4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V8 */ + dcdc5_reg: DCDC5 { + regulator-name = "DCDC5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1700000>; + regulator-suspend-min-microvolt = <1700000>; + }; + }; + + /* IR_3V3 */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-boot-on; + }; + + /* Core1_3V3 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3000000>; + regulator-suspend-min-microvolt = <3000000>; + }; + }; + + /* Core5_1V2 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-boot-on; + }; + + /* SPD_3V3 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-always-on; + regulator-boot-on; + }; + + /* DDR_0V6 */ + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-always-on; + regulator-boot-on; + }; + + /* VDD_PWM */ + ldo7_reg: LDO7 { + regulator-name = "LDO7"; + regulator-always-on; + regulator-boot-on; + }; + + /* ldo_1v8 */ + ldo8_reg: LDO8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "LDO9"; + regulator-boot-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "LDO10"; + regulator-boot-on; + }; + + ldortc1_reg: LDORTC1 { + regulator-name = "LDORTC1"; + regulator-boot-on; + }; + + ldortc2_reg: LDORTC2 { + regulator-name = "LDORTC2"; + regulator-boot-on; + }; + }; + }; +}; + +&snvs_rtc { + /* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */ + status = "disabled"; +}; + +&uart1 { + status = "okay"; +}; + +&usdhc2 { + non-removable; + status = "okay"; +}; + +&usdhc3 { + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 67d86012a85c..96678ddbb4e6 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -212,6 +212,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio1: gpio@e0050080 { compatible = "renesas,em-gio"; reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; @@ -224,6 +225,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio2: gpio@e0050100 { compatible = "renesas,em-gio"; reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; @@ -236,6 +238,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio3: gpio@e0050180 { compatible = "renesas,em-gio"; reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; @@ -248,6 +251,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio4: gpio@e0050200 { compatible = "renesas,em-gio"; reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 784818490376..b016b0b68306 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -138,7 +138,7 @@ #size-cells = <1>; ranges; - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; @@ -265,7 +265,7 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - mct@10050000 { + timer@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, @@ -314,8 +314,7 @@ sysmmu_jpeg: sysmmu@11a60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11a60000 0x1000>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>; power-domains = <&pd_cam>; @@ -355,8 +354,7 @@ sysmmu_fimd0: sysmmu@11e20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11e20000 0x1000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; power-domains = <&pd_lcd0>; @@ -507,8 +505,7 @@ sysmmu_mfc: sysmmu@13620000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13620000 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>; power-domains = <&pd_mfc>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 433f109d97ca..d2779a790ce3 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -111,28 +111,28 @@ syscon = <&pmu_system_controller>; }; - pd_mfc: mfc-power-domain@10023c40 { + pd_mfc: power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; #power-domain-cells = <0>; label = "MFC"; }; - pd_g3d: g3d-power-domain@10023c60 { + pd_g3d: power-domain@10023c60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; #power-domain-cells = <0>; label = "G3D"; }; - pd_lcd0: lcd0-power-domain@10023c80 { + pd_lcd0: power-domain@10023c80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; #power-domain-cells = <0>; label = "LCD0"; }; - pd_tv: tv-power-domain@10023c20 { + pd_tv: power-domain@10023c20 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; #power-domain-cells = <0>; @@ -140,21 +140,21 @@ label = "TV"; }; - pd_cam: cam-power-domain@10023c00 { + pd_cam: power-domain@10023c00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; #power-domain-cells = <0>; label = "CAM"; }; - pd_gps: gps-power-domain@10023ce0 { + pd_gps: power-domain@10023ce0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CE0 0x20>; #power-domain-cells = <0>; label = "GPS"; }; - pd_gps_alive: gps-alive-power-domain@10023d00 { + pd_gps_alive: power-domain@10023d00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023D00 0x20>; #power-domain-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index f220716239db..554819ae1446 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -72,7 +72,7 @@ }; soc: soc { - sysram: sysram@2020000 { + sysram: sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; #address-cells = <1>; @@ -90,7 +90,7 @@ }; }; - pd_lcd1: lcd1-power-domain@10023ca0 { + pd_lcd1: power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; @@ -106,26 +106,17 @@ arm,data-latency = <2 2 1>; }; - mct: mct@10050000 { + mct: timer@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = - <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>, - <5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <&combiner 12 6>, + <&combiner 12 7>, + <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@10060000 { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d20db2dfe8e2..5022aa574b26 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -188,7 +188,7 @@ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; @@ -206,7 +206,7 @@ }; }; - pd_isp: isp-power-domain@10023ca0 { + pd_isp: power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; @@ -243,25 +243,16 @@ clock-names = "aclk200", "aclk400_mcuisp"; }; - mct@10050000 { + timer@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = - <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &combiner 12 5>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <&combiner 12 5>, + <&combiner 12 6>, + <&combiner 12 7>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@10060000 { diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 67f9b4504a42..4801ca759feb 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -35,8 +35,8 @@ #size-cells = <1>; ranges; - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; + chipid: chipid@10000000 { + compatible = "samsung,exynos4210-chipid", "syscon"; reg = <0x10000000 0x100>; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 6fcb78a354fe..d6c85efdb465 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos5250.dtsi" / { @@ -135,6 +136,12 @@ }; }; + sound { + compatible = "samsung,arndale-wm1811"; + samsung,audio-cpu = <&i2s0>; + samsung,audio-codec = <&wm1811>; + }; + fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -151,6 +158,16 @@ }; }; +&clock { + assigned-clocks = <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <49152000>; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; @@ -502,9 +519,11 @@ &i2c_3 { status = "okay"; - wm1811a@1a { + wm1811: codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "MCLK1"; AVDD2-supply = <&main_dc_reg>; CPVDD-supply = <&main_dc_reg>; @@ -540,9 +559,15 @@ }; &i2s0 { + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; status = "okay"; }; +&i2s0_bus { + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; +}; + &mali { mali-supply = <&buck4_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index fc966c10cf49..e1f0215e3985 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -164,7 +164,7 @@ }; soc: soc { - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x30000>; #address-cells = <1>; @@ -233,28 +233,17 @@ power-domains = <&pd_mau>; }; - mct@101c0000 { + timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x1 0 &combiner 23 4>, - <0x2 0 &combiner 25 2>, - <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, - <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&combiner 23 3>, + <&combiner 23 4>, + <&combiner 25 2>, + <&combiner 25 3>, + <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_0: pinctrl@11400000 { @@ -586,9 +575,9 @@ compatible = "samsung,s5pv210-i2s"; status = "disabled"; reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; + dmas = <&pdma0 10>, + <&pdma0 9>, + <&pdma0 8>; dma-names = "tx", "rx", "tx-sec"; clocks = <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_I2S_BUS>, @@ -606,8 +595,8 @@ compatible = "samsung,s3c6410-i2s"; status = "disabled"; reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; + dmas = <&pdma1 12>, + <&pdma1 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; clock-names = "iis", "i2s_opclk0"; @@ -621,8 +610,8 @@ compatible = "samsung,s3c6410-i2s"; status = "disabled"; reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; + dmas = <&pdma0 12>, + <&pdma0 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; clock-names = "iis", "i2s_opclk0"; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 3581b57fbbf7..b0811dbbb362 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -180,7 +180,7 @@ reg = <0x10000000 0x100>; }; - mct: mct@100b0000 { + mct: timer@100b0000 { compatible = "samsung,exynos4210-mct"; reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index e6f78b1cee7c..a4b03d4c3de5 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -222,9 +222,9 @@ audi2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; + dmas = <&pdma0 10>, + <&pdma0 9>, + <&pdma0 8>; dma-names = "tx", "rx", "tx-sec"; clocks = <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_I2S_BUS>, diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9eb48cabcca4..2bcbdf8a39bf 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -1065,6 +1065,10 @@ status = "okay"; }; +&timer { + arm,cpu-registers-not-fw-configured; +}; + &tmu_cpu0 { vtmu-supply = <&ldo10_reg>; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 7d51e0f4ab79..d39907a41f78 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -175,7 +175,7 @@ }; clock: clock-controller@10010000 { - compatible = "samsung,exynos5420-clock"; + compatible = "samsung,exynos5420-clock", "syscon"; reg = <0x10010000 0x30000>; #clock-cells = <1>; }; @@ -237,6 +237,32 @@ status = "disabled"; }; + dmc: memory-controller@10c20000 { + compatible = "samsung,exynos5422-dmc"; + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>, <16 1>; + interrupt-names = "drex_0", "drex_1"; + clocks = <&clock CLK_FOUT_SPLL>, + <&clock CLK_MOUT_SCLK_SPLL>, + <&clock CLK_FF_DOUT_SPLL2>, + <&clock CLK_FOUT_BPLL>, + <&clock CLK_MOUT_BPLL>, + <&clock CLK_SCLK_BPLL>, + <&clock CLK_MOUT_MX_MSPLL_CCORE>, + <&clock CLK_MOUT_MCLK_CDREX>; + clock-names = "fout_spll", + "mout_sclk_spll", + "ff_dout_spll2", + "fout_bpll", + "mout_bpll", + "sclk_bpll", + "mout_mx_mspll_ccore", + "mout_mclk_cdrex"; + samsung,syscon-clk = <&clock>; + status = "disabled"; + }; + nocp_mem0_0: nocp@10ca1000 { compatible = "samsung,exynos5420-nocp"; reg = <0x10CA1000 0x200>; @@ -273,6 +299,54 @@ status = "disabled"; }; + ppmu_dmc0_0: ppmu@10d00000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d00000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 { + event-name = "ppmu-event3-dmc0_0"; + }; + }; + }; + + ppmu_dmc0_1: ppmu@10d10000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d10000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_1>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 { + event-name = "ppmu-event3-dmc0_1"; + }; + }; + }; + + ppmu_dmc1_0: ppmu@10d60000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d60000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX1_0>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 { + event-name = "ppmu-event3-dmc1_0"; + }; + }; + }; + + ppmu_dmc1_1: ppmu@10d70000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d70000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX1_1>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 { + event-name = "ppmu-event3-dmc1_1"; + }; + }; + }; + gsc_pd: power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; @@ -434,9 +508,9 @@ i2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; - dmas = <&adma 0 - &adma 2 - &adma 1>; + dmas = <&adma 0>, + <&adma 2>, + <&adma 1>; dma-names = "tx", "rx", "tx-sec"; clocks = <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_I2S_BUS>, @@ -455,8 +529,8 @@ i2s1: i2s@12d60000 { compatible = "samsung,exynos5420-i2s"; reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; + dmas = <&pdma1 12>, + <&pdma1 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; clock-names = "iis", "i2s_opclk0"; @@ -471,8 +545,8 @@ i2s2: i2s@12d70000 { compatible = "samsung,exynos5420-i2s"; reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; + dmas = <&pdma0 12>, + <&pdma0 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; clock-names = "iis", "i2s_opclk0"; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 829147e320e0..059fa32d1a8f 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -34,6 +34,98 @@ clock-frequency = <24000000>; }; }; + + dmc_opp_table: opp_table2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <165000000>; + opp-microvolt = <875000>; + }; + opp01 { + opp-hz = /bits/ 64 <206000000>; + opp-microvolt = <875000>; + }; + opp02 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <875000>; + }; + opp03 { + opp-hz = /bits/ 64 <413000000>; + opp-microvolt = <887500>; + }; + opp04 { + opp-hz = /bits/ 64 <543000000>; + opp-microvolt = <937500>; + }; + opp05 { + opp-hz = /bits/ 64 <633000000>; + opp-microvolt = <1012500>; + }; + opp06 { + opp-hz = /bits/ 64 <728000000>; + opp-microvolt = <1037500>; + }; + opp07 { + opp-hz = /bits/ 64 <825000000>; + opp-microvolt = <1050000>; + }; + }; + + samsung_K3QF2F20DB: lpddr3 { + compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; + density = <16384>; + io-width = <32>; + #address-cells = <1>; + #size-cells = <0>; + + tRFC-min-tck = <17>; + tRRD-min-tck = <2>; + tRPab-min-tck = <2>; + tRPpb-min-tck = <2>; + tRCD-min-tck = <3>; + tRC-min-tck = <6>; + tRAS-min-tck = <5>; + tWTR-min-tck = <2>; + tWR-min-tck = <7>; + tRTP-min-tck = <2>; + tW2W-C2C-min-tck = <0>; + tR2R-C2C-min-tck = <0>; + tWL-min-tck = <8>; + tDQSCK-min-tck = <5>; + tRL-min-tck = <14>; + tFAW-min-tck = <5>; + tXSR-min-tck = <12>; + tXP-min-tck = <2>; + tCKE-min-tck = <2>; + tCKESR-min-tck = <2>; + tMRD-min-tck = <5>; + + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 { + compatible = "jedec,lpddr3-timings"; + /* workaround: 'reg' shows max-freq */ + reg = <800000000>; + min-freq = <100000000>; + tRFC = <65000>; + tRRD = <6000>; + tRPab = <12000>; + tRPpb = <12000>; + tRCD = <10000>; + tRC = <33750>; + tRAS = <23000>; + tWTR = <3750>; + tWR = <7500>; + tRTP = <3750>; + tW2W-C2C = <0>; + tR2R-C2C = <0>; + tFAW = <25000>; + tXSR = <70000>; + tXP = <3750>; + tCKE = <3750>; + tCKESR = <3750>; + tMRD = <7000>; + }; + }; }; &adc { @@ -132,6 +224,15 @@ cpu-supply = <&buck2_reg>; }; +&dmc { + devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>, + <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>; + device-handle = <&samsung_K3QF2F20DB>; + operating-points-v2 = <&dmc_opp_table>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + &hsi2c_4 { status = "okay"; @@ -634,6 +735,22 @@ }; }; +&ppmu_dmc0_0 { + status = "okay"; +}; + +&ppmu_dmc0_1 { + status = "okay"; +}; + +&ppmu_dmc1_0 { + status = "okay"; +}; + +&ppmu_dmc1_1 { + status = "okay"; +}; + &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index c19b5a51ca44..a31ca2ef750f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -26,6 +26,10 @@ status = "disabled"; }; +&chipid { + samsung,asv-bin = <2>; +}; + &pwm { /* * PWM 0 -- fan diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 9c3b63b7cac6..f78dee801cd9 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -45,8 +45,17 @@ status = "disabled"; }; + timer: timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + }; + soc: soc { - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; #address-cells = <1>; @@ -64,30 +73,21 @@ }; }; - mct: mct@101c0000 { + mct: timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101c0000 0xb00>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, - <8>, <9>, <10>, <11>; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &combiner 23 3>, - <1 &combiner 23 4>, - <2 &combiner 25 2>, - <3 &combiner 25 3>, - <4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, - <5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>, - <6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>, - <7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>, - <8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>, - <9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>, - <10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>, - <11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&combiner 23 3>, + <&combiner 23 4>, + <&combiner 25 2>, + <&combiner 25 3>, + <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@101d0000 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 4398f2d1fe88..60ca3d685247 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -1034,6 +1034,10 @@ status = "okay"; }; +&timer { + arm,cpu-registers-not-fw-configured; +}; + &tmu_cpu0 { vtmu-supply = <&ldo10_reg>; }; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index de639eecc5c9..16177d815ee4 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -17,7 +17,7 @@ }; &clock { - compatible = "samsung,exynos5800-clock"; + compatible = "samsung,exynos5800-clock", "syscon"; }; &cluster_a15_opp_table { diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 3652f5556b29..f3464cf52e49 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -585,7 +585,7 @@ status = "disabled"; }; - iram: iram@ffff4c00 { + iram: sram@ffff4c00 { compatible = "mmio-sram"; reg = <0xffff4c00 0xb400>; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index d7f6fb764997..6b62f0745b82 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -55,7 +55,7 @@ interrupt-parent = <&avic>; ranges; - iram: iram@1fffc000 { + iram: sram@1fffc000 { compatible = "mmio-sram"; reg = <0x1fffc000 0x4000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 0a4b9a5d9a9c..dea86b98e9c3 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -116,7 +116,7 @@ interrupt-parent = <&tzic>; ranges; - iram: iram@1ffe0000 { + iram: sram@1ffe0000 { compatible = "mmio-sram"; reg = <0x1ffe0000 0x20000>; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index f00dda334976..9b4efcd82636 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -18,34 +18,28 @@ display0: disp0 { compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb565"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp0>; + + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; - display-timings { - claawvga { - native-mode; - clock-frequency = <27000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <60>; - vback-porch = <10>; - vfront-porch = <10>; - hsync-len = <20>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - port { + port@0 { + reg = <0>; + display0_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; gpio-keys { @@ -84,6 +78,16 @@ }; }; + panel { + compatible = "sii,43wvf1g"; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts index ee6263d1c2d3..f34993a490ee 100644 --- a/arch/arm/boot/dts/imx53-usbarmory.dts +++ b/arch/arm/boot/dts/imx53-usbarmory.dts @@ -120,7 +120,7 @@ }; /* - * UART mode pin header configration + * UART mode pin header configuration * 3 - GPIO5[26], pull-down 100K * 4 - GPIO5[27], pull-down 100K * 5 - TX, pull-up 100K diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts index 6632e99fbb68..3dcce3454b08 100644 --- a/arch/arm/boot/dts/imx6dl-apf6dev.dts +++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts @@ -1,49 +1,6 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 9a5d6c94cca4..cd075621de52 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -168,6 +168,21 @@ &i2c3 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcap_1>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; @@ -175,6 +190,30 @@ }; }; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2 + &pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4 + &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 + &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 + >; + + pinctrl_pcap_1: pcap1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ + >; + }; + + pinctrl_mxt_ts: mxttsgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ + >; + }; +}; + &ipu1_di0_disp0 { remote-endpoint = <&lcd_display_in>; }; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index e8d800fec637..80ed5f16a76e 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> / { @@ -308,7 +309,7 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - status = "disabled"; + status = "okay"; oled: oled@3d { compatible = "solomon,ssd1305fb-i2c"; @@ -330,6 +331,18 @@ vcc-supply = <&sw2_reg>; status = "disabled"; }; + + touchkeys: keys@5a { + compatible = "fsl,mpr121-touchkey"; + reg = <0x5a>; + vdd-supply = <&sw2_reg>; + autorepeat; + linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, + <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, + <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; + poll-interval = <50>; + status = "disabled"; + }; }; &iomuxc { @@ -447,6 +460,13 @@ >; }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 + >; + }; + pinctrl_usbh1: usbh1grp { fsl,pins = < MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 @@ -532,6 +552,12 @@ status = "okay"; }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts index f97927064750..6010d3d872ab 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts +++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts @@ -25,10 +25,6 @@ status = "okay"; }; -&i2c3 { - status = "okay"; -}; - &leds { status = "okay"; }; @@ -45,6 +41,10 @@ status = "okay"; }; +&touchkeys { + status = "okay"; +}; + &usdhc3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 2ed10310a7b7..008312ee0c31 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -64,6 +64,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 0edd3043d9c1..4665e15b196d 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -167,6 +167,19 @@ &i2c1 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + status = "disabled"; + }; + pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index b94bb687be6b..a3fa04a97d81 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -172,6 +172,19 @@ &i2c1 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 302fd6adc8a7..5ba49d0f4880 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -171,6 +171,19 @@ &i2c1 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + status = "disabled"; + }; + eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts index 07a36bb8075b..664b0af8f0bb 100644 --- a/arch/arm/boot/dts/imx6q-apf6dev.dts +++ b/arch/arm/boot/dts/imx6q-apf6dev.dts @@ -1,49 +1,6 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> /dts-v1/; #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts index 9c61e3be2d9a..5219553df1e7 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts @@ -43,6 +43,14 @@ status = "okay"; }; +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + &hdmi { ddc-i2c-bus = <&i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index 387801dde02e..845cfad99bf9 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -51,13 +51,11 @@ &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; }; &can2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; }; &ecspi1 { diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts index ecc3989f607b..d5d46908cf6e 100644 --- a/arch/arm/boot/dts/imx6q-gw54xx.dts +++ b/arch/arm/boot/dts/imx6q-gw54xx.dts @@ -15,19 +15,16 @@ sound-digital { compatible = "simple-audio-card"; simple-audio-card,name = "tda1997x-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; - simple-audio-card,dai-link@0 { - format = "i2s"; - - cpu { - sound-dai = <&ssi2>; - }; + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; - codec { - bitclock-master; - frame-master; - sound-dai = <&hdmi_receiver>; - }; + sound_codec: simple-audio-card,codec { + sound-dai = <&hdmi_receiver>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index d038f4117024..9d3be1cc6b64 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -73,6 +73,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -107,6 +108,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -141,6 +143,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 7c4ad541c3f5..ff1287e6b7ce 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -148,14 +148,16 @@ }; &can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_flexcan1_default>; + pinctrl-1 = <&pinctrl_flexcan1_sleep>; status = "disabled"; }; &can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_flexcan2_default>; + pinctrl-1 = <&pinctrl_flexcan2_sleep>; status = "disabled"; }; @@ -205,8 +207,11 @@ /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -216,8 +221,11 @@ */ &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; pmic: pfuze100@8 { @@ -372,9 +380,9 @@ */ &i2c3 { clock-frequency = <100000>; - pinctrl-names = "default", "recovery"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-1 = <&pinctrl_i2c3_recovery>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; @@ -599,19 +607,32 @@ >; }; - pinctrl_flexcan1: flexcan1grp { + pinctrl_flexcan1_default: flexcan1defgrp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 >; }; - pinctrl_flexcan2: flexcan2grp { + pinctrl_flexcan1_sleep: flexcan1slpgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0 + >; + }; + + pinctrl_flexcan2_default: flexcan2defgrp { fsl,pins = < MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 >; }; + pinctrl_flexcan2_sleep: flexcan2slpgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0 + >; + }; pinctrl_gpio_bl_on: gpioblon { fsl,pins = < @@ -646,6 +667,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 @@ -653,6 +681,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 @@ -660,7 +695,7 @@ >; }; - pinctrl_i2c3_recovery: i2c3recoverygrp { + pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1 MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi index 4738c3c1ab50..b78ed7974ea9 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi @@ -1,66 +1,56 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +/ { + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_3p3v>; + }; + + usdhc1_pwrseq: usdhc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <15>; + power-off-delay-us = <70>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + }; }; /* Bluetooth */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; status = "okay"; }; @@ -68,6 +58,12 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + mmc-pwrseq = <&usdhc1_pwrseq>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + cap-power-off-card; + keep-power-in-suspend; non-removable; status = "okay"; @@ -94,65 +90,63 @@ }; &iomuxc { - apf6 { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0 - MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0 - MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0 - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0 - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */ - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */ + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */ - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x130b0 /* WL_EN */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x130b0 /* WL_IRQ */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 9fc1fa449f64..b8e74ab3c993 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -1,49 +1,6 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -54,35 +11,37 @@ stdout-path = &uart4; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <0>; + power-supply = <®_5v>; + }; + disp0 { compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "bgr666"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_disp1>; - - display-timings { - lw700 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; + pinctrl-0 = <&pinctrl_ipu1_disp0>; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; - port { display_in: endpoint { remote-endpoint = <&ipu1_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; gpio-keys { @@ -111,17 +70,30 @@ }; }; + panel { + compatible = "armadeus,st0700-adapt"; + power-supply = <®_3p3v>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + vin-supply = <®_5v>; }; - reg_usbh1_vbus: regulator-usb-h1-vbus { + reg_5v: regulator-5v { compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; + regulator-name = "5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; @@ -166,6 +138,7 @@ &can2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_5v>; status = "okay"; }; @@ -212,6 +185,11 @@ VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; }; + + rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; }; &i2c3 { @@ -261,7 +239,7 @@ }; &usbh1 { - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_5v>; phy_type = "utmi"; status = "okay"; }; @@ -297,178 +275,176 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpios>; - apf6dev { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 - >; - }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - >; - }; + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 + >; + }; - pinctrl_gpios: gpiosgrp { - fsl,pins = < - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 - MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 - MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 - >; - }; + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 + >; + }; - pinctrl_gsm: gsmgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ - >; - }; + pinctrl_gsm: gsmgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + >; + }; - pinctrl_ipu1_disp1: ipu1disp1grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 - >; - }; + pinctrl_ipu1_disp0: ipu1disp0grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 - MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; - pinctrl_spdif: spdifgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 - >; - }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; - pinctrl_touchscreen: touchscreengrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 - >; - }; + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 019dda6b88ad..d03dff23863d 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -166,8 +166,11 @@ */ &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-0 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; pmic: pfuze100@8 { @@ -312,9 +315,9 @@ */ &i2c3 { clock-frequency = <100000>; - pinctrl-names = "default", "recovery"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-1 = <&pinctrl_i2c3_recovery>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; @@ -426,6 +429,9 @@ }; &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_oc_1>; + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 @@ -509,6 +515,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -516,7 +529,7 @@ >; }; - pinctrl_i2c3_recovery: i2c3recoverygrp { + pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 @@ -615,6 +628,13 @@ >; }; + pinctrl_usbh_oc_1: usbhoc1grp { + fsl,pins = < + /* USBH_OC */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 @@ -681,6 +701,13 @@ >; }; + pinctrl_usbc_id_1: usbc_id-1 { + fsl,pins = < + /* USBC_ID */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index c23ba229fd05..c38e86eedcc0 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -105,19 +105,16 @@ sound-digital { compatible = "simple-audio-card"; simple-audio-card,name = "tda1997x-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; - simple-audio-card,dai-link@0 { - format = "i2s"; - - cpu { - sound-dai = <&ssi2>; - }; + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; - codec { - bitclock-master; - frame-master; - sound-dai = <&hdmi_receiver>; - }; + sound_codec: simple-audio-card,codec { + sound-dai = <&hdmi_receiver>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 97f1659144ea..de514eb5aa99 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -132,6 +132,19 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + pca9535: gpio-expander@27 { + compatible = "nxp,pca9535"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9535>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + }; + eeprom@57 { compatible = "atmel,24c02"; reg = <0x57>; @@ -237,6 +250,12 @@ >; }; + pinctrl_pca9535: pca9535grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 776bfc77f89d..828dd20cd27d 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -210,6 +210,14 @@ >; }; + pinctrl_usbotg: usbotg { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -287,6 +295,12 @@ status = "okay"; }; +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 2cfb4112a467..c070893c509e 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -279,8 +279,18 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-handle = <ðphy>; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; }; &mipi_csi { diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 93be00a60c88..a2a4f33a3e3e 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -358,8 +358,10 @@ compatible = "fsl,mma8451"; reg = <0x1c>; interrupt-parent = <&gpio1>; - interrupt-names = "int1", "int2"; - interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; hpa2: amp@60 { @@ -849,7 +851,6 @@ &iomuxc { pinctrl_accel: accelgrp { fsl,pins = < - MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x4001b000 MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000 >; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3a96b5538a2a..59c54e6ad09a 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -525,7 +525,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6sl-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts new file mode 100644 index 000000000000..7214d1c98249 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Kobo Clara HD ebook reader + * + * Name on mainboard is: 37NB-E60K00+4A4 + * Serials start with: E60K02 (a number also seen in + * vendor kernel sources) + * + * This mainboard seems to be equipped with different SoCs. + * In the Kobo Clara HD ebook reader it is an i.MX6SLL + * + * Copyright 2019 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sll.dtsi" +#include "e60k02.dtsi" + +/ { + model = "Kobo Clara HD"; + compatible = "kobo,clarahd", "fsl,imx6sll"; +}; + +&clks { + assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <393216000>; +}; + +&cpu0 { + arm-supply = <&dcdc3_reg>; + soc-supply = <&dcdc1_reg>; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x17059 /* PWR_SW */ + MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x17059 /* HALL_EN */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x79 + MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x79 + MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x79 + MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x79 + MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x79 + MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x79 + MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x79 + MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x79 + MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x79 + MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x79 + MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x79 + MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x79 + MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x79 + MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x79 + MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x79 + MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x79 + MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x79 + MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x79 + MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x79 + MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x79 + MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x79 + MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x79 + MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x79 + MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x79 + MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x79 + MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x17059 + >; + }; + + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */ + >; + }; + + pinctrl_ricoh_gpio: ricoh-gpiogrp { + fsl,pins = < + MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */ + MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */ + MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2grp-sleep { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x100f9 + MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x100f9 + MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x100f9 + MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grp-sleep { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1 + MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1 + MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1 + MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; +}; + +&lm3630a { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; +}; + +®_wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; +}; + +&ricoh619 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; +}; + +&wifi_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; +}; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 13c7ba7fa6bc..85aa8bb98528 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -507,7 +507,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6sll-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x4000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 531a52c1e987..59bad60a47dc 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -594,7 +594,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index c2a9dd57e56a..1506eb12b21e 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -30,6 +30,16 @@ enable-active-high; }; + reg_sensors: regulator-sensors { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensors_reg>; + regulator-name = "sensors-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; + }; + reg_can_3v3: regulator-can-3v3 { compatible = "regulator-fixed"; regulator-name = "can-3v3"; @@ -180,9 +190,11 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - mag3110@e { + magnetometer@e { compatible = "fsl,mag3110"; reg = <0x0e>; + vdd-supply = <®_sensors>; + vddio-supply = <®_sensors>; }; }; @@ -266,6 +278,8 @@ &usbotg1 { dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; status = "okay"; }; @@ -448,6 +462,12 @@ >; }; + pinctrl_sensors_reg: sensorsreggrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 @@ -499,6 +519,12 @@ >; }; + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi new file mode 100644 index 000000000000..f2386dcb9ff2 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; /* will be filled by U-Boot */ + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-reset-duration = <1>; + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; + phy-supply = <®_3v3>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + }; +}; + +/* Bluetooth */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + uart-has-rtscts; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +/* WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc3_pwrseq>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + /* INT# */ + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 + /* RST# */ + MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 + /* BT_REG_ON */ + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 + MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 + MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 + MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 + MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 + MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 + /* WL_REG_ON */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 + /* WL_IRQ */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi new file mode 100644 index 000000000000..18966350bfd8 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +/ { + chosen { + stdout-path = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_5v>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + user-led { + label = "User"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + onewire { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_w1>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + }; + + panel: panel { + compatible = "armadeus,st0700-adapt"; + power-supply = <®_3v3>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg1_vbus: regulator-usbotg1vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg1vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg2_vbus: regulator-usbotg2vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg2vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2_vbus>; + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + vref-supply = <®_3v3>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <5000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xffff>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + vbus-supply = <®_usbotg1_vbus>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbotg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 + MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 + MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 + MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 + MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 + MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 + MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 + >; + }; + + pinctrl_usbotg1_vbus: usbotg1vbusgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts index 0205fd56d975..5a3e06d6219b 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts @@ -8,413 +8,10 @@ /dts-v1/; #include "imx6ul-kontron-n6310-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" / { model = "Kontron N6310 S"; compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som", "fsl,imx6ul"; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - - led1 { - label = "debug-led1"; - gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - default-state = "off"; - linux,default-trigger = "heartbeat"; - }; - - led2 { - label = "debug-led2"; - gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3 { - label = "debug-led3"; - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - pwm-beeper { - compatible = "pwm-beeper"; - pwms = <&pwm8 0 5000>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_usb_otg1_vbus: regulator-usb-otg1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_vref_adc: regulator-vref-adc { - compatible = "regulator-fixed"; - regulator-name = "vref-adc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&adc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc1>; - num-channels = <3>; - vref-supply = <®_vref_adc>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&ecspi1 { - cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - eeprom@0 { - compatible = "anvo,anv32e61w", "atmel,at25"; - reg = <0>; - spi-max-frequency = <20000000>; - spi-cpha; - spi-cpol; - pagesize = <1>; - size = <8192>; - address-width = <16>; - }; -}; - -&fec1 { - pinctrl-0 = <&pinctrl_enet1>; - /delete-node/ mdio; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; - phy-mode = "rmii"; - phy-handle = <ðphy2>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "rmii-ref"; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET2_REF>; - clock-names = "rmii-ref"; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; -}; - -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - rtc@32 { - compatible = "epson,rx8900"; - reg = <0x32>; - }; -}; - -&pwm8 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm8>; - status = "okay"; -}; - -&snvs_poweroff { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - linux,rs485-enabled-at-boot-time; - rs485-rx-during-tx; - rs485-rts-active-low; - uart-has-rtscts; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1>; - dr_mode = "otg"; - srp-disable; - hnp-disable; - adp-disable; - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; - voltage-ranges = <3300 3300>; - no-1-8-v; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - non-removable; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; - voltage-ranges = <3300 3300>; - no-1-8-v; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; - - pinctrl_adc1: adc1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 - MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 - >; - }; - - /* FRAM */ - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 - MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 - MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 - MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 - >; - }; - - pinctrl_enet2_mdio: enet2mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp{ - fsl,pins = < - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ - MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ - MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ - MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ - >; - }; - - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ - MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ - MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 - MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 - >; - }; - - pinctrl_pwm8: pwm8grp { - fsl,pins = < - MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 - MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 - /* - * mux unused RTS to make sure it doesn't cause - * any interrupts when it is undefined - */ - MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 - MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 - MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 - MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 - MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usbotg1: usbotg1 { - fsl,pins = < - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi index a896b2348dd2..47d3ce5d255f 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi @@ -6,7 +6,7 @@ */ #include "imx6ul.dtsi" -#include <dt-bindings/gpio/gpio.h> +#include "imx6ul-kontron-n6x1x-som-common.dtsi" / { model = "Kontron N6310 SOM"; @@ -18,49 +18,7 @@ }; }; -&ecspi2 { - cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - status = "okay"; - - spi-flash@0 { - compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; - phy-mode = "rmii"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "rmii-ref"; - }; - }; -}; - -&fec2 { - phy-mode = "rmii"; - status = "disabled"; -}; - &qspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; - spi-flash@0 { #address-cells = <1>; #size-cells = <1>; @@ -81,54 +39,3 @@ }; }; }; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_out>; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 - MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 - MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 - MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 - >; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 - >; - }; - - pinctrl_enet1_mdio: enet1mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 - >; - }; - - pinctrl_qspi: qspigrp { - fsl,pins = < - MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 - MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 - MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 - MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 - MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 - MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 - >; - }; - - pinctrl_reset_out: rstoutgrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts new file mode 100644 index 000000000000..239a1af3aeaa --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ul-kontron-n6311-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N6311 S"; + compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som", + "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi new file mode 100644 index 000000000000..a095a7654ac6 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ul.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N6311 SOM"; + compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + device_type = "memory"; + }; +}; + +&qspi { + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x08000000>; + }; + + partition@8000000 { + label = "ubi2"; + reg = <0x08000000 0x18000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi new file mode 100644 index 000000000000..f05e91841202 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "debug-led1"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "debug-led2"; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "debug-led3"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm8 0 5000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_adc: regulator-vref-adc { + compatible = "regulator-fixed"; + regulator-name = "vref-adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + num-channels = <3>; + vref-supply = <®_vref_adc>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + eeprom@0 { + compatible = "anvo,anv32e61w", "atmel,at25"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + spi-cpol; + pagesize = <1>; + size = <8192>; + address-width = <16>; + }; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + rs485-rts-active-low; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 + >; + }; + + pinctrl_enet2_mdio: enet2mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 + /* + * mux unused RTS to make sure it doesn't cause + * any interrupts when it is undefined + */ + MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1 { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi new file mode 100644 index 000000000000..a17af4d9bfdf --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = &uart4; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec2 { + phy-mode = "rmii"; + status = "disabled"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_out>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 + MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 + >; + }; + + pinctrl_enet1_mdio: enet1mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_reset_out: rstoutgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi index cf7faf4b9c47..6ce84f92b027 100644 --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -1,193 +1,6 @@ -/* - * Copyright 2017 Armadeus Systems <support@armadeus.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2017 Armadeus Systems <support@armadeus.com> #include "imx6ul.dtsi" - -/ { - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0>; /* will be filled by U-Boot */ - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - usdhc3_pwrseq: usdhc3-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rmii"; - phy-reset-duration = <1>; - phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; - phy-handle = <ðphy1>; - phy-supply = <®_3v3>; - status = "okay"; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - interrupt-parent = <&gpio4>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - status = "okay"; - }; - }; -}; - -/* Bluetooth */ -&uart8 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart8>; - uart-has-rtscts; - status = "okay"; -}; - -/* eMMC */ -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - bus-width = <8>; - no-1-8-v; - non-removable; - status = "okay"; -}; - -/* WiFi */ -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - bus-width = <4>; - no-1-8-v; - non-removable; - mmc-pwrseq = <&usdhc3_pwrseq>; - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio2>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "host-wake"; - }; -}; - -&iomuxc { - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - /* INT# */ - MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 - /* RST# */ - MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 - >; - }; - - pinctrl_uart8: uart8grp { - fsl,pins = < - MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 - /* BT_REG_ON */ - MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 - MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 - MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 - MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 - MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 - MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 - MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 - MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 - MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 - /* WL_REG_ON */ - MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 - /* WL_IRQ */ - MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 - >; - }; -}; +#include "imx6ul-imx6ull-opos6ul.dtsi" diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts index 8ecdb9ad2b2e..375b98d7205a 100644 --- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts @@ -1,293 +1,21 @@ -/* - * Copyright 2017 Armadeus Systems <support@armadeus.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2017 Armadeus Systems <support@armadeus.com> /dts-v1/; #include "imx6ul-opos6ul.dtsi" +#include "imx6ul-imx6ull-opos6uldev.dtsi" / { - model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board"; - compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul"; - - chosen { - stdout-path = &uart1; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 191000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <7>; - power-supply = <®_5v>; - status = "okay"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - user-button { - label = "User button"; - gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - linux,code = <BTN_MISC>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - - user-led { - label = "User"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led>; - gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - onewire { - compatible = "w1-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_w1>; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - }; - - panel: panel { - compatible = "armadeus,st0700-adapt"; - power-supply = <®_3v3>; - backlight = <&backlight>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - - reg_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg1_vbus: regulator-usbotg1vbus { - compatible = "regulator-fixed"; - regulator-name = "usbotg1vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1_vbus>; - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg2_vbus: regulator-usbotg2vbus { - compatible = "regulator-fixed"; - regulator-name = "usbotg2vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg2_vbus>; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&adc1 { - vref-supply = <®_3v3>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - xceiver-supply = <®_5v>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - xceiver-supply = <®_5v>; - status = "okay"; -}; - -&ecspi4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi4>; - cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; - status = "okay"; - - spidev0: spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <5000000>; - }; - - spidev1: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <5000000>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clock_frequency = <400000>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock_frequency = <400000>; - status = "okay"; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif>; - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "disabled"; -}; - -&tsc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - measure-delay-time = <0xffff>; - pre-charge-time = <0xffff>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1_id>; - vbus-supply = <®_usbotg1_vbus>; - dr_mode = "otg"; - disable-over-current; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usbotg2_vbus>; - dr_mode = "host"; - disable-over-current; - status = "okay"; + model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board"; + compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul"; }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpios>; + pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>; - pinctrl_ecspi4: ecspi4grp { + pinctrl_tamper_gpios: tampergpiosgrp { fsl,pins = < - MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 - MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 - MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 - MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 - MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 - MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 - >; - }; - - pinctrl_gpios: gpiosgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 - MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 - MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 - MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 - MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 - MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 - MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0 MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 @@ -299,100 +27,6 @@ >; }; - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = < - MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - >; - }; - - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 - >; - }; - - pinctrl_led: ledgrp { - fsl,pins = < - MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 - >; - }; - - pinctrl_tsc: tscgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usbotg1_id: usbotg1idgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 - >; - }; - - pinctrl_usbotg1_vbus: usbotg1vbusgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 - >; - }; - pinctrl_usbotg2_vbus: usbotg2vbusgrp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index 41f3b7f62bbf..88f631c8fabb 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -20,7 +20,7 @@ * Set the minimum memory size here and * let the bootloader set the real size. */ - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f008036e9294..d9fdca12819b 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -558,7 +558,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, @@ -711,6 +711,7 @@ clocks = <&clks IMX6UL_CLK_GPT2_BUS>, <&clks IMX6UL_CLK_GPT2_SERIAL>; clock-names = "ipg", "per"; + status = "disabled"; }; sdma: sdma@20ec000 { diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi index b6147c76d159..a78849fd2afa 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -8,6 +8,20 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + /* fixed crystal dedicated to mcp2515 */ clk16m: clk16m { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi index fb213bec4654..95a11b8bcbdb 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi @@ -15,7 +15,7 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6>; + &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>; }; &iomuxc_snvs { diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 038d8c90f6df..a0545431b3dc 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -26,7 +26,7 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5>; + &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index d56728f03c35..6d850d997e1e 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -54,6 +54,18 @@ vref-supply = <®_module_3v3_avdd>; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + /* Colibri SPI */ &ecspi1 { cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; @@ -62,8 +74,9 @@ }; &fec2 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet2>; + pinctrl-1 = <&pinctrl_enet2_sleep>; phy-mode = "rmii"; phy-handle = <ðphy1>; status = "okay"; @@ -198,6 +211,12 @@ assigned-clock-rates = <0>, <198000000>; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + &iomuxc { pinctrl_can_int: canint-grp { fsl,pins = < @@ -220,6 +239,21 @@ >; }; + pinctrl_enet2_sleep: enet2sleepgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 + MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x0 + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x0 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0 + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x0 + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x0 + >; + }; + pinctrl_ecspi1_cs: ecspi1-cs-grp { fsl,pins = < MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0 @@ -234,6 +268,13 @@ >; }; + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 + >; + }; + pinctrl_flexcan2: flexcan2-grp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 @@ -249,8 +290,6 @@ pinctrl_gpio1: gpio1-grp { fsl,pins = < - MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */ - MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0X14 /* SODIMM 77 */ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x14 /* SODIMM 99 */ MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x14 /* SODIMM 133 */ @@ -303,6 +342,13 @@ >; }; + pinctrl_gpio7: gpio7-grp { /* CAN1 */ + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */ + MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */ + >; + }; + pinctrl_gpmi_nand: gpmi-nand-grp { fsl,pins = < MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 @@ -490,6 +536,12 @@ MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x14 >; }; + + pinctrl_wdog: wdog-grp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; }; &iomuxc_snvs { @@ -517,19 +569,19 @@ pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */ fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0 >; }; pinctrl_snvs_reg_sd: snvs-reg-sd-grp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x4001b8b0 + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0 >; }; pinctrl_snvs_usbc_det: snvs-usbc-det-grp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0 >; }; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts new file mode 100644 index 000000000000..57588a5e1e34 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ull-kontron-n6411-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N6411 S"; + compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi new file mode 100644 index 000000000000..b7e984284e1a --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ull.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N6411 SOM"; + compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + device_type = "memory"; + }; +}; + +&qspi { + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x08000000>; + }; + + partition@8000000 { + label = "ubi2"; + reg = <0x08000000 0x18000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi new file mode 100644 index 000000000000..155f941f2811 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +#include "imx6ull.dtsi" +#include "imx6ul-imx6ull-opos6ul.dtsi" diff --git a/arch/arm/boot/dts/imx6ull-opos6uldev.dts b/arch/arm/boot/dts/imx6ull-opos6uldev.dts new file mode 100644 index 000000000000..198fdb72641b --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-opos6uldev.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +/dts-v1/; +#include "imx6ull-opos6ul.dtsi" +#include "imx6ul-imx6ull-opos6uldev.dtsi" + +/ { + model = "Armadeus Systems OPOS6UL SoM (i.MX6ULL) on OPOS6ULDev board"; + compatible = "armadeus,imx6ull-opos6uldev", "armadeus,imx6ull-opos6ul", "fsl,imx6ull"; +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tamper_gpios>; + + pinctrl_tamper_gpios: tampergpiosgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0 + >; + }; + + pinctrl_usbotg2_vbus: usbotg2vbusgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; + + pinctrl_w1: w1grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 3f2746169181..6aa123cbdadb 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -52,6 +52,20 @@ clock-frequency = <16000000>; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + panel: panel { compatible = "edt,et057090dhu"; backlight = <&bl>; @@ -131,6 +145,21 @@ &i2c4 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc: m41t0m6@68 { compatible = "st,m41t0"; @@ -186,3 +215,12 @@ vmmc-supply = <®_3v3>; status = "okay"; }; + +&iomuxc { + pinctrl_gpiotouch: touchgpios { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 917eb0b58b13..d05be3f0e2a7 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -322,7 +322,6 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; - no-1-8-v; cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; disable-wp; vqmmc-supply = <®_LDO2>; @@ -667,6 +666,28 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 @@ -737,12 +758,17 @@ pinctrl_gpio_lpsr: gpio1-grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x59 MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 >; }; + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19 + >; + }; + pinctrl_i2c1: i2c1-grp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 9c8dd32cc035..d8acd7cc7918 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -22,6 +22,7 @@ reg = <1>; clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; cpu-idle-states = <&cpu_sleep_wait>; }; }; @@ -43,7 +44,8 @@ opp-hz = /bits/ 64 <792000000>; opp-microvolt = <1000000>; clock-latency-ns = <150000>; - opp-supported-hw = <0xf>, <0xf>; + opp-supported-hw = <0xd>, <0xf>; + opp-suspend; }; opp-996000000 { @@ -51,6 +53,7 @@ opp-microvolt = <1100000>; clock-latency-ns = <150000>; opp-supported-hw = <0xc>, <0xf>; + opp-suspend; }; opp-1200000000 { @@ -58,6 +61,7 @@ opp-microvolt = <1225000>; clock-latency-ns = <150000>; opp-supported-hw = <0x8>, <0xf>; + opp-suspend; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index e2e604d6ba0b..1b812f4e7453 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -559,7 +559,7 @@ anatop: anatop@30360000 { compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x30360000 0x10000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts index 4245b33bb451..a863a2b337d6 100644 --- a/arch/arm/boot/dts/imx7ulp-evk.dts +++ b/arch/arm/boot/dts/imx7ulp-evk.dts @@ -77,6 +77,8 @@ }; &usdhc0 { + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc0>; cd-gpios = <&gpio_ptc 10 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index 6859a3a83750..d37a1927c88e 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -87,13 +87,6 @@ #clock-cells = <0>; }; - mpll: clock-mpll { - compatible = "fixed-clock"; - clock-frequency = <480000000>; - clock-output-names = "mpll"; - #clock-cells = <0>; - }; - ahbbridge0: bus@40000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -230,8 +223,6 @@ <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC0>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; - assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; bus-width = <4>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; @@ -246,8 +237,6 @@ <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>; - assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; bus-width = <4>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; @@ -258,12 +247,22 @@ compatible = "fsl,imx7ulp-scg1"; reg = <0x403e0000 0x10000>; clocks = <&rosc>, <&sosc>, <&sirc>, - <&firc>, <&upll>, <&mpll>; + <&firc>, <&upll>; clock-names = "rosc", "sosc", "sirc", - "firc", "upll", "mpll"; + "firc", "upll"; #clock-cells = <1>; }; + wdog1: watchdog@403d0000 { + compatible = "fsl,imx7ulp-wdt"; + reg = <0x403d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; + timeout-sec = <40>; + }; + pcc2: clock-controller@403f0000 { compatible = "fsl,imx7ulp-pcc2"; reg = <0x403f0000 0x10000>; @@ -276,13 +275,12 @@ <&scg1 IMX7ULP_CLK_APLL_PFD0>, <&scg1 IMX7ULP_CLK_UPLL>, <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, - <&scg1 IMX7ULP_CLK_MIPI_PLL>, <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, <&scg1 IMX7ULP_CLK_ROSC>, <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", - "upll", "sosc_bus_clk", "mpll", + "upll", "sosc_bus_clk", "firc_bus_clk", "rosc", "spll_bus_clk"; assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; @@ -309,13 +307,12 @@ <&scg1 IMX7ULP_CLK_APLL_PFD0>, <&scg1 IMX7ULP_CLK_UPLL>, <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, - <&scg1 IMX7ULP_CLK_MIPI_PLL>, <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, <&scg1 IMX7ULP_CLK_ROSC>, <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", - "upll", "sosc_bus_clk", "mpll", + "upll", "sosc_bus_clk", "firc_bus_clk", "rosc", "spll_bus_clk"; }; }; diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi index 457515b0736a..0397c3423d2d 100644 --- a/arch/arm/boot/dts/keystone-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-clocks.dtsi @@ -408,4 +408,31 @@ clocks { reg-names = "control", "domain"; domain-id = <0>; }; + + /* + * Below are set of fixed, input clocks definitions, + * for which real frequencies have to be defined in board files. + * Those clocks can be used as reference clocks for some HW modules + * (as cpts, for example) by configuring corresponding clock muxes. + */ + timi0: timi0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "timi0"; + }; + + timi1: timi1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "timi1"; + }; + + tsrefclk: tsrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsrefclk"; + }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi index f7592155a740..cf30e007fea3 100644 --- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi @@ -71,4 +71,24 @@ clocks { reg-names = "control", "domain"; domain-id = <29>; }; + + /* + * Below are set of fixed, input clocks definitions, + * for which real frequencies have to be defined in board files. + * Those clocks can be used as reference clocks for some HW modules + * (as cpts, for example) by configuring corresponding clock muxes. + */ + tsipclka: tsipclka { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsipclka"; + }; + + tsipclkb: tsipclkb { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsipclkb"; + }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index 1db17ec744b1..ad15e77874b1 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -135,8 +135,8 @@ netcp: netcp@24000000 { /* NetCP address range */ ranges = <0 0x24000000 0x1000000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, @@ -156,6 +156,23 @@ netcp: netcp@24000000 { tx-queue = <896>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsipclka>, <&tsrefclk>, + <&tsipclkb>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x4>, <0x8>, <0xC>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index e203145acbea..d5a6c1f5633c 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -152,8 +152,8 @@ netcp: netcp@2000000 { /* NetCP address range */ ranges = <0 0x2000000 0x100000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 22>, @@ -175,6 +175,22 @@ netcp: netcp@2000000 { tx-queue = <648>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsrefclk>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x8>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index a2e47bad3307..c1f982604145 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -134,8 +134,8 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, @@ -155,6 +155,22 @@ netcp: netcp@26000000 { tx-queue = <896>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsrefclk>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x8>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index c97ed29a0a0b..217bd374e52b 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -244,7 +244,7 @@ rs5c372: rs5c372@32 { status = "disabled"; - compatible = "ricoh,rs5c372"; + compatible = "ricoh,rs5c372a"; reg = <0x32>; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index f7a841a28865..2a0a98fe67f0 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; - compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts index 7675bc3fa868..57bae2aa910e 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx Torpedo Development Kit"; - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts index 07ac99b9cda6..cdb89b3e2a9b 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts @@ -11,22 +11,6 @@ #include "logicpd-torpedo-37xx-devkit.dts" &lcd0 { - - label = "28"; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <2>; - vsync-len = <11>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; + /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ + compatible = "logicpd,type28"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 18c27e85051f..5532db04046c 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -50,6 +50,20 @@ }; }; +&uart2 { + /delete-property/dma-names; + bluetooth { + compatible = "ti,wl1283-st"; + enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */ + max-speed = <3000000>; + }; +}; + +/* The DM3730 has a faster L3 than OMAP35, so increase pixel clock */ +&mt9p031_out { + pixel-clock-frequency = <90000000>; +}; + &omap3_pmx_core { mmc3_pins: pinmux_mm3_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index 449cc7616da6..184e462d96ab 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -108,6 +108,7 @@ &dss { status = "ok"; vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&vpll2>; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins1>; port { diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 506b118e511a..3a5228562b0d 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -35,6 +35,11 @@ }; }; +/* The Torpedo doesn't route the USB host pins */ +&usbhshost { + status = "disabled"; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts new file mode 100644 index 000000000000..c1947b5a688d --- /dev/null +++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Dell Wyse 3020 a.k.a. "Ariel" a.k.a. Tx0D (T00D, T10D) + * + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +/dts-v1/; +#include "mmp3.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Dell Ariel"; + compatible = "dell,wyse-ariel", "marvell,mmp3"; + + aliases { + serial2 = &uart3; + }; + + chosen { + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + bootargs = "earlyprintk=ttyS2,115200 console=ttyS2,115200"; + }; + + memory@0 { + linux,usable-memory = <0x0 0x7f600000>; + available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>; + reg = <0x0 0x80000000>; + device_type = "memory"; + }; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&usb_otg0 { + status = "okay"; +}; + +&usb_otg_phy0 { + status = "okay"; +}; + +&mmc3 { + status = "okay"; + max-frequency = <50000000>; + status = "okay"; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; +}; + +&twsi1 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + status = "okay"; + }; +}; + +&twsi3 { + status = "okay"; +}; + +&twsi4 { + status = "okay"; +}; + +&ssp3 { + status = "okay"; + cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + + firmware-flash@0 { + compatible = "st,m25p80", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + m25p,fast-read; + }; +}; + +&ssp4 { + cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi new file mode 100644 index 000000000000..d9762de0ed34 --- /dev/null +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +#include <dt-bindings/clock/marvell,mmp2.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,mmp3-smp"; + + cpu@0 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + axi@d4200000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4200000 0x00200000>; + ranges; + + interrupt-controller@d4282000 { + compatible = "marvell,mmp3-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>, + <0xd4284000 0x100>; + mrvl,intc-nr-irqs = <64>; + }; + + pmic_mux: interrupt-controller@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <4>; + }; + + rtc_mux: interrupt-controller@d4282154 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x154 0x4>, <0x16c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + hsi3_mux: interrupt-controller@d42821bc { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1bc 0x4>, <0x1a4 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <3>; + }; + + gpu_mux: interrupt-controller@d42821c0 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c0 0x4>, <0x1a8 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <3>; + }; + + twsi_mux: interrupt-controller@d4282158 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x158 0x4>, <0x170 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <5>; + }; + + hsi2_mux: interrupt-controller@d42821c4 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c4 0x4>, <0x1ac 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + dxo_mux: interrupt-controller@d42821c8 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c8 0x4>, <0x1b0 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + misc1_mux: interrupt-controller@d428215c { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x15c 0x4>, <0x174 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <31>; + }; + + ci_mux: interrupt-controller@d42821cc { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1cc 0x4>, <0x1b4 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + ssp_mux: interrupt-controller@d4282160 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x160 0x4>, <0x178 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + hsi1_mux: interrupt-controller@d4282184 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x184 0x4>, <0x17c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <4>; + }; + + misc2_mux: interrupt-controller@d4282188 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x188 0x4>, <0x180 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <20>; + }; + + hsi0_mux: interrupt-controller@d42821d0 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1d0 0x4>, <0x1b8 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <5>; + }; + + usb_otg_phy0: usb-otg-phy@d4207000 { + compatible = "marvell,mmp3-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_otg0: usb-otg@d4208000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xd4208000 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_USB>; + clock-names = "USBCLK"; + phys = <&usb_otg_phy0>; + phy-names = "usb"; + status = "disabled"; + }; + + mmc1: mmc@d4280000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH0>; + clock-names = "io"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc2: mmc@d4280800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH1>; + clock-names = "io"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc3: mmc@d4281000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH2>; + clock-names = "io"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc4: mmc@d4281800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH3>; + clock-names = "io"; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + camera0: camera@d420a000 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a000 0x800>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_CCIC0>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; + + camera1: camera@d420a800 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a800 0x800>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_CCIC1>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; + }; + + apb@d4000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4000000 0x00200000>; + ranges; + + timer: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_TIMER>; + }; + + uart1: uart@d4030000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4030000 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART0>; + resets = <&soc_clocks MMP2_CLK_UART0>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: uart@d4017000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4017000 0x1000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART1>; + resets = <&soc_clocks MMP2_CLK_UART1>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: uart@d4018000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4018000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART2>; + resets = <&soc_clocks MMP2_CLK_UART2>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: uart@d4016000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4016000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART3>; + resets = <&soc_clocks MMP2_CLK_UART3>; + reg-shift = <2>; + status = "disabled"; + }; + + gpio: gpio@d4019000 { + compatible = "marvell,mmp2-gpio"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4019000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpio_mux"; + clocks = <&soc_clocks MMP2_CLK_GPIO>; + resets = <&soc_clocks MMP2_CLK_GPIO>; + interrupt-controller; + #interrupt-cells = <2>; + ranges; + + gcb0: gpio@d4019000 { + reg = <0xd4019000 0x4>; + }; + + gcb1: gpio@d4019004 { + reg = <0xd4019004 0x4>; + }; + + gcb2: gpio@d4019008 { + reg = <0xd4019008 0x4>; + }; + + gcb3: gpio@d4019100 { + reg = <0xd4019100 0x4>; + }; + + gcb4: gpio@d4019104 { + reg = <0xd4019104 0x4>; + }; + + gcb5: gpio@d4019108 { + reg = <0xd4019108 0x4>; + }; + }; + + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_TWSI0>; + resets = <&soc_clocks MMP2_CLK_TWSI0>; + #address-cells = <1>; + #size-cells = <0>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi2: i2c@d4031000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4031000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <0>; + clocks = <&soc_clocks MMP2_CLK_TWSI1>; + resets = <&soc_clocks MMP2_CLK_TWSI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi3: i2c@d4032000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4032000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <1>; + clocks = <&soc_clocks MMP2_CLK_TWSI2>; + resets = <&soc_clocks MMP2_CLK_TWSI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi4: i2c@d4033000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <2>; + clocks = <&soc_clocks MMP2_CLK_TWSI3>; + resets = <&soc_clocks MMP2_CLK_TWSI3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + twsi5: i2c@d4033800 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033800 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <3>; + clocks = <&soc_clocks MMP2_CLK_TWSI4>; + resets = <&soc_clocks MMP2_CLK_TWSI4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi6: i2c@d4034000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4034000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <4>; + clocks = <&soc_clocks MMP2_CLK_TWSI5>; + resets = <&soc_clocks MMP2_CLK_TWSI5>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <1 0>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + interrupt-parent = <&rtc_mux>; + clocks = <&soc_clocks MMP2_CLK_RTC>; + resets = <&soc_clocks MMP2_CLK_RTC>; + status = "disabled"; + }; + + ssp1: spi@d4035000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4035000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp2: spi@d4036000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4036000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP1>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp3: spi@d4037000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4037000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp4: spi@d4039000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4039000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP3>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + l2: l2-cache-controller@d0020000 { + compatible = "marvell,tauros3-cache", "arm,pl310-cache"; + reg = <0xd0020000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + soc_clocks: clocks@d4050000 { + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + snoop-control-unit@e0000000 { + compatible = "arm,arm11mp-scu"; + reg = <0xe0000000 0x100>; + }; + + gic: interrupt-controller@e0001000 { + compatible = "arm,arm11mp-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xe0001000 0x1000>, + <0xe0000100 0x100>; + }; + + local-timer@e0000600 { + compatible = "arm,arm11mp-twd-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + reg = <0xe0000600 0x20>; + }; + + watchdog@e0000620 { + compatible = "arm,arm11mp-twd-wdt"; + reg = <0xe0000620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + }; + }; +}; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index d1eae47b83f6..08bae935605c 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -43,11 +43,13 @@ compatible = "motorola,mapphone-cpcap-charger"; interrupts-extended = < &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 - &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 + &cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0 + &cpcap 54 0 >; interrupt-names = "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", - "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; + "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", + "battdetb"; mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio3 23 GPIO_ACTIVE_LOW>; io-channels = <&cpcap_adc 0 &cpcap_adc 1 diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi new file mode 100644 index 000000000000..da6b107da84a --- /dev/null +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -0,0 +1,786 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "omap443x.dtsi" +#include "motorola-cpcap-mapphone.dtsi" + +/ { + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + + /* + * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, + * then 1023 - 1024 seems to contain mbm. + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x3fd00000>; /* 1021 MB */ + }; + + /* Poweroff GPIO probably connected to CPCAP */ + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff_gpio>; + pinctrl-names = "default"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + pinctrl-0 = <&hdmi_hpd_gpio>; + pinctrl-names = "default"; + label = "hdmi"; + type = "d"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + /* + * HDMI 5V regulator probably sourced from battery. Let's keep + * keep this as always enabled for HDMI to work until we've + * figured what the encoder chip is. + */ + hdmi_regulator: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "hdmi"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ + enable-active-high; + regulator-always-on; + }; + + /* FS USB Host PHY on port 1 for mdm6600 */ + fsusb1_phy: usb-phy@1 { + compatible = "motorola,mapphone-mdm6600"; + pinctrl-0 = <&usb_mdm6600_pins>; + pinctrl-names = "default"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ + /* mode: gpio_148 gpio_149 */ + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + /* cmd: gpio_103 gpio_104 gpio_142 */ + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + /* status: gpio_52 gpio_53 gpio_55 */ + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; + + /* HS USB host TLL nop-phy on port 2 for w3glte */ + hsusb2_phy: usb-phy@2 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + /* LCD regulator from sw5 source */ + lcd_regulator: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ + enable-active-high; + vin-supply = <&sw5>; + }; + + /* This is probably coming straight from the battery.. */ + wl12xx_vmmc: regulator-wl12xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + gpio_keys { + compatible = "gpio-keys"; + + volume_down { + label = "Volume Down"; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ + linux,code = <KEY_VOLUMEDOWN>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + + slider { + label = "Keypad Slide"; + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + }; + + soundcard { + compatible = "audio-graph-card"; + label = "Droid 4 Audio"; + + simple-graph-card,widgets = + "Speaker", "Earpiece", + "Speaker", "Loudspeaker", + "Headphone", "Headphone Jack", + "Microphone", "Internal Mic"; + + simple-graph-card,routing = + "Earpiece", "EP", + "Loudspeaker", "SPKR", + "Headphone Jack", "HSL", + "Headphone Jack", "HSR", + "MICR", "Internal Mic"; + + dais = <&mcbsp2_port>, <&mcbsp3_port>; + }; + + pwm8: dmtimer-pwm-8 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: dmtimer-pwm-9 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <10000000>; + }; +}; + +&dss { + status = "okay"; +}; + +&dsi1 { + status = "okay"; + vdd-supply = <&vcsi>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: display { + compatible = "panel-dsi-cm"; + label = "lcd0"; + vddi-supply = <&lcd_regulator>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + + width-mm = <50>; + height-mm = <89>; + + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <540>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <960>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; +}; + +&hdmi { + status = "okay"; + pinctrl-0 = <&dss_hdmi_pins>; + pinctrl-names = "default"; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; + +&i2c1 { + tmp105@48 { + compatible = "ti,tmp105"; + reg = <0x48>; + pinctrl-0 = <&tmp105_irq>; + pinctrl-names = "default"; + /* kpd_row0.gpio_178 */ + interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING + &omap4_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + + /* Row 1 */ + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 6, KEY_2) + MATRIX_KEY(2, 3, KEY_3) + MATRIX_KEY(0, 7, KEY_4) + MATRIX_KEY(0, 4, KEY_5) + MATRIX_KEY(5, 5, KEY_6) + MATRIX_KEY(0, 1, KEY_7) + MATRIX_KEY(0, 5, KEY_8) + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(1, 6, KEY_0) + + /* Row 2 */ + MATRIX_KEY(3, 4, KEY_APOSTROPHE) + MATRIX_KEY(7, 6, KEY_Q) + MATRIX_KEY(7, 7, KEY_W) + MATRIX_KEY(7, 2, KEY_E) + MATRIX_KEY(1, 0, KEY_R) + MATRIX_KEY(4, 4, KEY_T) + MATRIX_KEY(1, 2, KEY_Y) + MATRIX_KEY(6, 7, KEY_U) + MATRIX_KEY(2, 2, KEY_I) + MATRIX_KEY(5, 6, KEY_O) + MATRIX_KEY(3, 7, KEY_P) + MATRIX_KEY(6, 5, KEY_BACKSPACE) + + /* Row 3 */ + MATRIX_KEY(5, 4, KEY_TAB) + MATRIX_KEY(5, 7, KEY_A) + MATRIX_KEY(2, 7, KEY_S) + MATRIX_KEY(7, 0, KEY_D) + MATRIX_KEY(2, 6, KEY_F) + MATRIX_KEY(6, 2, KEY_G) + MATRIX_KEY(6, 6, KEY_H) + MATRIX_KEY(1, 4, KEY_J) + MATRIX_KEY(3, 1, KEY_K) + MATRIX_KEY(2, 1, KEY_L) + MATRIX_KEY(4, 6, KEY_ENTER) + + /* Row 4 */ + MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ + MATRIX_KEY(6, 1, KEY_Z) + MATRIX_KEY(7, 4, KEY_X) + MATRIX_KEY(5, 1, KEY_C) + MATRIX_KEY(1, 7, KEY_V) + MATRIX_KEY(2, 4, KEY_B) + MATRIX_KEY(4, 1, KEY_N) + MATRIX_KEY(1, 1, KEY_M) + MATRIX_KEY(3, 5, KEY_COMMA) + MATRIX_KEY(5, 2, KEY_DOT) + MATRIX_KEY(6, 3, KEY_UP) + MATRIX_KEY(7, 3, KEY_OK) + + /* Row 5 */ + MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ + MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ + MATRIX_KEY(6, 0, KEY_MINUS) + MATRIX_KEY(4, 7, KEY_EQUAL) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(3, 2, KEY_SLASH) + MATRIX_KEY(4, 3, KEY_LEFT) + MATRIX_KEY(5, 3, KEY_DOWN) + MATRIX_KEY(3, 3, KEY_RIGHT) + + /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ + MATRIX_KEY(5, 0, KEY_VOLUMEUP) + >; +}; + +&mmc1 { + vmmc-supply = <&vwlan2>; + bus-width = <4>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ +}; + +&mmc2 { + vmmc-supply = <&vsdio>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + vmmc-supply = <&wl12xx_vmmc>; + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xde>; + interrupt-names = "irq", "wakeup"; + non-removable; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1285", "ti,wl1283"; + reg = <2>; + /* gpio_100 with gpmc_wait2 pad as wakeirq */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, + <&omap4_pmx_core 0x4e>; + interrupt-names = "irq", "wakeup"; + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; + }; +}; + +&i2c2 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ + + /* gpio_183 with sys_nirq2 pad as wakeup */ + interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, + <&omap4_pmx_core 0x160>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; + + isl29030@44 { + compatible = "isil,isl29030"; + reg = <0x44>; + + pinctrl-names = "default"; + pinctrl-0 = <&als_proximity_pins>; + + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ + }; +}; + +&omap4_pmx_core { + + /* hdmi_hpd.gpio_63 */ + hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) + >; + }; + + /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) + >; + }; + + /* gpmc_ncs0.gpio_50 */ + poweroff_gpio: pinmux_poweroff_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) + >; + }; + + /* kpd_row0.gpio_178 */ + tmp105_irq: pinmux_tmp105_irq { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { + /* gpio_60 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) + >; + }; + + touchscreen_pins: pinmux_touchscreen_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + als_proximity_pins: pinmux_als_proximity_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_mdm6600_pins: pinmux_usb_mdm6600_pins { + pinctrl-single,pins = < + /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + + /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + + /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) + + /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + + /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + + /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + + /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + + /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + + /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + + /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + + /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + usb_ulpi_pins: pinmux_usb_ulpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + /* usb0_otg_dp and usb0_otg_dm */ + usb_utmi_pins: pinmux_usb_utmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + /* + * Note that the v3.0.8 stock userspace dynamically remuxes uart1 + * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 + * when not used. If needed, we can add rts pin remux later based + * on power measurements. + */ + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ + OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ + OMAP4_IOPAD(0x13e, MUX_MODE1) + + /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ + OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) + + /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ + OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + /* uart3_tx_irtx and uart3_rx_irrx */ + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, MUX_MODE2) + OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ + OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ + OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ + OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ + OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ + OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ + OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ + OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ + OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ + OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ + >; + }; + + vibrator_direction_pin: pinmux_vibrator_direction_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: pinmux_vibrator_enable_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; +}; + +&omap4_pmx_wkup { + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + +/* + * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for + * uart1 wakeirq. + */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xfc>; +}; + +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x17c>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + bluetooth { + compatible = "ti,wl1285-st"; + enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ + max-speed = <3686400>; + }; +}; + +&usbhsohci { + phys = <&fsusb1_phy>; + phy-names = "usb"; +}; + +&usbhsehci { + phys = <&hsusb2_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + +/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + + /* + * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4. + * VBUS Regulator Main Characteristics". Binding uses 2 mA units. + */ + power = <150>; +}; + +&i2c4 { + ak8975: magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ + + rotation-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + + }; + + lis3dh: accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ + + rotation-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; + +&mcbsp2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; + + mcbsp2_port: port { + cpu_dai2: endpoint { + dai-format = "i2s"; + remote-endpoint = <&cpcap_audio_codec0>; + frame-master = <&cpcap_audio_codec0>; + bitclock-master = <&cpcap_audio_codec0>; + }; + }; +}; + +&mcbsp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; + status = "okay"; + + mcbsp3_port: port { + cpu_dai3: endpoint { + dai-format = "dsp_a"; + frame-master = <&cpcap_audio_codec1>; + bitclock-master = <&cpcap_audio_codec1>; + remote-endpoint = <&cpcap_audio_codec1>; + }; + }; +}; + +&cpcap_audio_codec0 { + remote-endpoint = <&cpu_dai2>; +}; + +&cpcap_audio_codec1 { + remote-endpoint = <&cpu_dai3>; +}; diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi index ba397407c1dd..7fda40ab5fe8 100644 --- a/arch/arm/boot/dts/mt6323.dtsi +++ b/arch/arm/boot/dts/mt6323.dtsi @@ -238,5 +238,32 @@ regulator-enable-ramp-delay = <216>; }; }; + + mt6323keys: mt6323keys { + compatible = "mediatek,mt6323-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power { + linux,keycodes = <116>; + wakeup-source; + }; + + home { + linux,keycodes = <114>; + }; + }; + + codec: mt6397codec { + compatible = "mediatek,mt6397-codec"; + }; + + power-controller { + compatible = "mediatek,mt6323-pwrc"; + }; + + rtc { + compatible = "mediatek,mt6323-rtc"; + }; }; }; diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts index 3621b7d2b22a..9980c10c6e29 100644 --- a/arch/arm/boot/dts/mt7629-rfb.dts +++ b/arch/arm/boot/dts/mt7629-rfb.dts @@ -66,9 +66,21 @@ pinctrl-1 = <&ephy_leds_pins>; status = "okay"; + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; + phy-mode = "gmii"; phy-handle = <&phy0>; }; @@ -78,7 +90,6 @@ phy0: ethernet-phy@0 { reg = <0>; - phy-mode = "gmii"; }; }; }; diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 9608bc2ccb3f..867b88103b9d 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -468,14 +468,12 @@ compatible = "mediatek,mt7629-sgmiisys", "syscon"; reg = <0x1b128000 0x3000>; #clock-cells = <1>; - mediatek,physpeed = "2500"; }; sgmiisys1: syscon@1b130000 { compatible = "mediatek,mt7629-sgmiisys", "syscon"; reg = <0x1b130000 0x3000>; #clock-cells = <1>; - mediatek,physpeed = "2500"; }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1aa99fc1487a..125ed933ca75 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index e3df3c166902..4ed3f93f5841 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts index 76e52c78cbb4..32dbaeaed147 100644 --- a/arch/arm/boot/dts/omap3-cm-t3530.dts +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3530"; - compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; /* Regulator to trigger the reset signal of the Wifi module */ mmc2_sdio_reset: regulator-mmc2-sdio-reset { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 6e944dfa0f3d..683819bf0915 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts index a80fc60bc773..afed85078ad8 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts index 0753776071f8..07c51a105c0d 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index faafc48d8f61..162d0726b008 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -7,7 +7,7 @@ #include "omap3-devkit8000-common.dtsi" / { model = "TimLL OMAP3 Devkit8000"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; aliases { display1 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b6ef1a7ac8a4..409a758c99f1 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,7 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index badb9b3c8897..c9ecbc45c8e2 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts index a5365252bfbe..35c4e15abeb7 100644 --- a/arch/arm/boot/dts/omap3-ha.dts +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 03dcd05fb8a0..567232584f08 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { @@ -49,3 +49,11 @@ interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */ }; }; + +&uart2 { + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */ + max-speed = <300000>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 6d0519e3dfd0..e341535a7162 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 060acd1e803a..df6ba1219830 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { @@ -71,3 +71,11 @@ interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ }; }; + +&uart2 { + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */ + max-speed = <300000>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 25170bd3c573..32f31035daa2 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 9a5fde2d9bce..ec9ba04ef43b 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -10,7 +10,7 @@ / { model = "TI OMAP3430 LDP (Zoom1 Labrador)"; - compatible = "ti,omap3-ldp", "ti,omap3"; + compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c22833d4e568..73d477898ec2 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -7,7 +7,7 @@ / { model = "INCOstartec LILLY-A83X module (DM3730)"; - compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; chosen { bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index fec335400074..ecb4ef738e07 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 74c0ff2350d3..2495a696cec6 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 84a5ade1e865..a638e059135b 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -155,6 +155,12 @@ pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ }; + rom_rng: rng { + compatible = "nokia,n900-rom-rng"; + clocks = <&rng_ick>; + clock-names = "ick"; + }; + /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */ vctcxo: vctcxo { compatible = "fixed-clock"; @@ -1013,6 +1019,11 @@ }; }; +/* RNG not directly accessible on n900, see omap3-rom-rng instead */ +&rng_target { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 6681d4519e97..a075b63f3087 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -11,13 +11,6 @@ cpus { cpu@0 { cpu0-supply = <&vcc>; - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - 1000000 1375000 - >; }; }; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 9886bf8b90ab..31d47a1fad84 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 18338576c41d..7f04dfad8203 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index f204c8af8281..bc5a04e03336 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index c633f7cee68e..065c31cbf0e2 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index fb88ebc9858c..e38c1c51392c 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index 76cca00d97b6..e6dc23159c4d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index cc081a9e4c1e..587c08ce282d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index 1de41c0826e0..f57de6010994 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 9ed13118ed8e..281af6c113be 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index 81b957f33c9f..ea509956d7ac 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index ec5891718ae6..150d5be42d27 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -226,6 +226,17 @@ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ }; + /* wl1251 wifi+bt module */ + wlan_en: fixed-regulator-wg7210_en { + compatible = "regulator-fixed"; + regulator-name = "vwlan"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + /* wg7210 (wifi+bt module) 32k clock buffer */ wg7210_32k: fixed-regulator-wg7210_32k { compatible = "regulator-fixed"; @@ -522,9 +533,30 @@ /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */ }; -/* mmc3 is probed using pdata-quirks to pass wl1251 card data */ &mmc3 { - status = "disabled"; + vmmc-supply = <&wlan_en>; + + bus-width = <4>; + non-removable; + ti,non-removable; + cap-power-off-card; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + wlan: wifi@1 { + compatible = "ti,wl1251"; + + reg = <1>; + + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */ + + ti,wl1251-has-eeprom; + }; }; /* bluetooth*/ diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index ae96002abb3b..24bf3fd86641 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3530 with CM-T3530"; - compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 7de6df16fc17..eb3893b9535e 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index 40a87330e8c3..b6879cdc5c13 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index 6276e7079b36..64221e3b3477 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 Thunder baseboard with TAO3530 SOM"; - compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index db3a2fe84e99..d240e39f2151 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4043ecb38016..5698a3e241aa 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> @@ -502,6 +503,30 @@ status = "disabled"; }; + /* Likely needs to be tagged disabled on HS devices */ + rng_target: target-module@480a0000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x480a003c 0x4>, + <0x480a0040 0x4>, + <0x480a0044 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&rng_ick>; + clock-names = "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480a0000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap2-rng"; + reg = <0x0 0x2000>; + interrupts = <52>; + }; + }; + mcbsp2: mcbsp@49022000 { compatible = "ti,omap3-mcbsp"; reg = <0x49022000 0xff>, diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 0abd61108a53..7bfde8aac7ae 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3430 SDP"; - compatible = "ti,omap3430-sdp", "ti,omap3"; + compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi index 5e9d1afcd422..21079cdf2663 100644 --- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi @@ -260,6 +260,6 @@ <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>, <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>, <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>, - <&mspro_fck>; + <&rng_ick>, <&mspro_fck>; }; }; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 7b09cbee8bb8..c4dd9801840d 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -16,19 +16,67 @@ / { cpus { cpu: cpu@0 { - /* OMAP343x/OMAP35xx variants OPP1-5 */ - operating-points = < - /* kHz uV */ - 125000 975000 - 250000 1075000 - 500000 1200000 - 550000 1270000 - 600000 1350000 - >; + /* OMAP343x/OMAP35xx variants OPP1-6 */ + operating-points-v2 = <&cpu0_opp_table>; + clock-latency = <300000>; /* From legacy driver */ }; }; + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp1-125000000 { + opp-hz = /bits/ 64 <125000000>; + /* + * we currently only select the max voltage from table + * Table 3-3 of the omap3530 Data sheet (SPRS507F). + * Format is: <target min max> + */ + opp-microvolt = <975000 975000 975000>; + /* + * first value is silicon revision bit mask + * second one 720MHz Device Identification bit mask + */ + opp-supported-hw = <0xffffffff 3>; + }; + + opp2-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1075000 1075000 1075000>; + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp3-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp4-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1275000 1275000 1275000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp5-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1350000 1350000 1350000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp6-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1350000 1350000 1350000>; + /* only high-speed grade omap3530 devices */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; + }; + }; + ocp@68000000 { omap3_pmx_core2: pinmux@480025d8 { compatible = "ti,omap3-padconf", "pinctrl-single"; diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index e66fc57ec35d..4e9cc9003594 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -105,3 +105,7 @@ <&mcbsp4_ick>, <&uart4_fck>; }; }; + +&dpll4_m4_ck { + ti,max-div = <31>; +}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 1e552f08f120..c618cb257d00 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -19,16 +19,65 @@ }; cpus { - /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ + /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */ cpu: cpu@0 { - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - >; - clock-latency = <300000>; /* From legacy driver */ + operating-points-v2 = <&cpu0_opp_table>; + + vbb-supply = <&abb_mpu_iva>; + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; + + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + /* + * we currently only select the max voltage from table + * Table 4-19 of the DM3730 Data sheet (SPRS685B) + * Format is: cpu0-supply: <target min max> + * vbb-supply: <target min max> + */ + opp-microvolt = <1012500 1012500 1012500>, + <1012500 1012500 1012500>; + /* + * first value is silicon revision bit mask + * second one is "speed binned" bit mask + */ + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1200000 1200000>, + <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp130-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1325000 1325000 1325000>, + <1325000 1325000 1325000>; + opp-supported-hw = <0xffffffff 3>; }; + + opp1g-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1375000 1375000 1375000>, + <1375000 1375000 1375000>; + /* only on am/dm37x with speed-binned bit set */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; + }; + }; + + opp_supply_mpu_iva: opp_supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; }; ocp@68000000 { diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 685c82a9d03e..0656c32439d2 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -416,7 +416,7 @@ #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll4_ck>; - ti,max-div = <32>; + ti,max-div = <16>; reg = <0x0e40>; ti,index-starts-at-one; }; diff --git a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts new file mode 100644 index 000000000000..ba5c35b7027d --- /dev/null +++ b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +/ { + model = "Motorola Droid Bionic XT875"; + compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4"; +}; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index a40fe8d49da6..c0d2fd92aea3 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -1,784 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include <dt-bindings/input/input.h> -#include "omap443x.dtsi" -#include "motorola-cpcap-mapphone.dtsi" +#include "motorola-mapphone-common.dtsi" / { model = "Motorola Droid 4 XT894"; compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; - - chosen { - stdout-path = &uart3; - }; - - aliases { - display0 = &lcd0; - display1 = &hdmi0; - }; - - /* - * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, - * then 1023 - 1024 seems to contain mbm. - */ - memory { - device_type = "memory"; - reg = <0x80000000 0x3fd00000>; /* 1021 MB */ - }; - - /* Poweroff GPIO probably connected to CPCAP */ - gpio-poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&poweroff_gpio>; - pinctrl-names = "default"; - gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ - }; - - hdmi0: connector { - compatible = "hdmi-connector"; - pinctrl-0 = <&hdmi_hpd_gpio>; - pinctrl-names = "default"; - label = "hdmi"; - type = "d"; - - hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - }; - - /* - * HDMI 5V regulator probably sourced from battery. Let's keep - * keep this as always enabled for HDMI to work until we've - * figured what the encoder chip is. - */ - hdmi_regulator: regulator-hdmi { - compatible = "regulator-fixed"; - regulator-name = "hdmi"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ - enable-active-high; - regulator-always-on; - }; - - /* FS USB Host PHY on port 1 for mdm6600 */ - fsusb1_phy: usb-phy@1 { - compatible = "motorola,mapphone-mdm6600"; - pinctrl-0 = <&usb_mdm6600_pins>; - pinctrl-names = "default"; - enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ - power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ - reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ - /* mode: gpio_148 gpio_149 */ - motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, - <&gpio5 21 GPIO_ACTIVE_HIGH>; - /* cmd: gpio_103 gpio_104 gpio_142 */ - motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, - <&gpio4 8 GPIO_ACTIVE_HIGH>, - <&gpio5 14 GPIO_ACTIVE_HIGH>; - /* status: gpio_52 gpio_53 gpio_55 */ - motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, - <&gpio2 21 GPIO_ACTIVE_HIGH>, - <&gpio2 23 GPIO_ACTIVE_HIGH>; - #phy-cells = <0>; - }; - - /* HS USB host TLL nop-phy on port 2 for w3glte */ - hsusb2_phy: usb-phy@2 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - - /* LCD regulator from sw5 source */ - lcd_regulator: regulator-lcd { - compatible = "regulator-fixed"; - regulator-name = "lcd"; - regulator-min-microvolt = <5050000>; - regulator-max-microvolt = <5050000>; - gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ - enable-active-high; - vin-supply = <&sw5>; - }; - - /* This is probably coming straight from the battery.. */ - wl12xx_vmmc: regulator-wl12xx { - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1650000>; - gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ - startup-delay-us = <70000>; - enable-active-high; - }; - - gpio_keys { - compatible = "gpio-keys"; - - volume_down { - label = "Volume Down"; - gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ - linux,code = <KEY_VOLUMEDOWN>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - - slider { - label = "Keypad Slide"; - gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ - linux,input-type = <EV_SW>; - linux,code = <SW_KEYPAD_SLIDE>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - }; - - soundcard { - compatible = "audio-graph-card"; - label = "Droid 4 Audio"; - - simple-graph-card,widgets = - "Speaker", "Earpiece", - "Speaker", "Loudspeaker", - "Headphone", "Headphone Jack", - "Microphone", "Internal Mic"; - - simple-graph-card,routing = - "Earpiece", "EP", - "Loudspeaker", "SPKR", - "Headphone Jack", "HSL", - "Headphone Jack", "HSR", - "MICR", "Internal Mic"; - - dais = <&mcbsp2_port>, <&mcbsp3_port>; - }; - - pwm8: dmtimer-pwm-8 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_direction_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer8>; - ti,clock-source = <0x01>; - }; - - pwm9: dmtimer-pwm-9 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_enable_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer9>; - ti,clock-source = <0x01>; - }; - - vibrator { - compatible = "pwm-vibrator"; - pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; - pwm-names = "enable", "direction"; - direction-duty-cycle-ns = <10000000>; - }; -}; - -&dss { - status = "okay"; -}; - -&dsi1 { - status = "okay"; - vdd-supply = <&vcsi>; - - port { - dsi1_out_ep: endpoint { - remote-endpoint = <&lcd0_in>; - lanes = <0 1 2 3 4 5>; - }; - }; - - lcd0: display { - compatible = "panel-dsi-cm"; - label = "lcd0"; - vddi-supply = <&lcd_regulator>; - reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ - - width-mm = <50>; - height-mm = <89>; - - panel-timing { - clock-frequency = <0>; /* Calculated by dsi */ - - hback-porch = <2>; - hactive = <540>; - hfront-porch = <0>; - hsync-len = <2>; - - vback-porch = <1>; - vactive = <960>; - vfront-porch = <0>; - vsync-len = <1>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; - }; -}; - -&hdmi { - status = "okay"; - pinctrl-0 = <&dss_hdmi_pins>; - pinctrl-names = "default"; - vdda-supply = <&vdac>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - lanes = <1 0 3 2 5 4 7 6>; - }; - }; -}; - -&i2c1 { - tmp105@48 { - compatible = "ti,tmp105"; - reg = <0x48>; - pinctrl-0 = <&tmp105_irq>; - pinctrl-names = "default"; - /* kpd_row0.gpio_178 */ - interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING - &omap4_pmx_core 0x14e>; - interrupt-names = "irq", "wakeup"; - wakeup-source; - }; -}; - -&keypad { - keypad,num-rows = <8>; - keypad,num-columns = <8>; - linux,keymap = < - - /* Row 1 */ - MATRIX_KEY(0, 2, KEY_1) - MATRIX_KEY(0, 6, KEY_2) - MATRIX_KEY(2, 3, KEY_3) - MATRIX_KEY(0, 7, KEY_4) - MATRIX_KEY(0, 4, KEY_5) - MATRIX_KEY(5, 5, KEY_6) - MATRIX_KEY(0, 1, KEY_7) - MATRIX_KEY(0, 5, KEY_8) - MATRIX_KEY(0, 0, KEY_9) - MATRIX_KEY(1, 6, KEY_0) - - /* Row 2 */ - MATRIX_KEY(3, 4, KEY_APOSTROPHE) - MATRIX_KEY(7, 6, KEY_Q) - MATRIX_KEY(7, 7, KEY_W) - MATRIX_KEY(7, 2, KEY_E) - MATRIX_KEY(1, 0, KEY_R) - MATRIX_KEY(4, 4, KEY_T) - MATRIX_KEY(1, 2, KEY_Y) - MATRIX_KEY(6, 7, KEY_U) - MATRIX_KEY(2, 2, KEY_I) - MATRIX_KEY(5, 6, KEY_O) - MATRIX_KEY(3, 7, KEY_P) - MATRIX_KEY(6, 5, KEY_BACKSPACE) - - /* Row 3 */ - MATRIX_KEY(5, 4, KEY_TAB) - MATRIX_KEY(5, 7, KEY_A) - MATRIX_KEY(2, 7, KEY_S) - MATRIX_KEY(7, 0, KEY_D) - MATRIX_KEY(2, 6, KEY_F) - MATRIX_KEY(6, 2, KEY_G) - MATRIX_KEY(6, 6, KEY_H) - MATRIX_KEY(1, 4, KEY_J) - MATRIX_KEY(3, 1, KEY_K) - MATRIX_KEY(2, 1, KEY_L) - MATRIX_KEY(4, 6, KEY_ENTER) - - /* Row 4 */ - MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ - MATRIX_KEY(6, 1, KEY_Z) - MATRIX_KEY(7, 4, KEY_X) - MATRIX_KEY(5, 1, KEY_C) - MATRIX_KEY(1, 7, KEY_V) - MATRIX_KEY(2, 4, KEY_B) - MATRIX_KEY(4, 1, KEY_N) - MATRIX_KEY(1, 1, KEY_M) - MATRIX_KEY(3, 5, KEY_COMMA) - MATRIX_KEY(5, 2, KEY_DOT) - MATRIX_KEY(6, 3, KEY_UP) - MATRIX_KEY(7, 3, KEY_OK) - - /* Row 5 */ - MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ - MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ - MATRIX_KEY(6, 0, KEY_MINUS) - MATRIX_KEY(4, 7, KEY_EQUAL) - MATRIX_KEY(1, 5, KEY_SPACE) - MATRIX_KEY(3, 2, KEY_SLASH) - MATRIX_KEY(4, 3, KEY_LEFT) - MATRIX_KEY(5, 3, KEY_DOWN) - MATRIX_KEY(3, 3, KEY_RIGHT) - - /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ - MATRIX_KEY(5, 0, KEY_VOLUMEUP) - >; -}; - -&mmc1 { - vmmc-supply = <&vwlan2>; - bus-width = <4>; - cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ -}; - -&mmc2 { - vmmc-supply = <&vsdio>; - bus-width = <8>; - ti,non-removable; -}; - -&mmc3 { - vmmc-supply = <&wl12xx_vmmc>; - /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ - interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0xde>; - interrupt-names = "irq", "wakeup"; - non-removable; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1285", "ti,wl1283"; - reg = <2>; - /* gpio_100 with gpmc_wait2 pad as wakeirq */ - interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, - <&omap4_pmx_core 0x4e>; - interrupt-names = "irq", "wakeup"; - ref-clock-frequency = <26000000>; - tcxo-clock-frequency = <26000000>; - }; -}; - -&i2c1 { - led-controller@38 { - compatible = "ti,lm3532"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x38>; - - enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - - ramp-up-us = <1024>; - ramp-down-us = <8193>; - - led@0 { - reg = <0>; - led-sources = <2>; - ti,led-mode = <0>; - label = ":backlight"; - linux,default-trigger = "backlight"; - }; - - led@1 { - reg = <1>; - led-sources = <1>; - ti,led-mode = <0>; - label = ":kbd_backlight"; - }; - }; -}; - -&i2c2 { - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; - - reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ - - /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, - <&omap4_pmx_core 0x160>; - interrupt-names = "irq", "wakeup"; - wakeup-source; - }; - - isl29030@44 { - compatible = "isil,isl29030"; - reg = <0x44>; - - pinctrl-names = "default"; - pinctrl-0 = <&als_proximity_pins>; - - interrupt-parent = <&gpio6>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ - }; -}; - -&omap4_pmx_core { - - /* hdmi_hpd.gpio_63 */ - hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) - >; - }; - - /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) - >; - }; - - /* gpmc_ncs0.gpio_50 */ - poweroff_gpio: pinmux_poweroff_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) - >; - }; - - /* kpd_row0.gpio_178 */ - tmp105_irq: pinmux_tmp105_irq { - pinctrl-single,pins = < - OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { - /* gpio_60 */ - pinctrl-single,pins = < - OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) - >; - }; - - touchscreen_pins: pinmux_touchscreen_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - als_proximity_pins: pinmux_als_proximity_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - usb_mdm6600_pins: pinmux_usb_mdm6600_pins { - pinctrl-single,pins = < - /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ - OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) - - /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) - - /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ - OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) - - /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ - OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) - - /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ - OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) - - /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ - OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) - - /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) - - /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) - - /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ - OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) - - /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ - OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) - - /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) - >; - }; - - usb_ulpi_pins: pinmux_usb_ulpi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x196, MUX_MODE7) - OMAP4_IOPAD(0x198, MUX_MODE7) - OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) - >; - }; - - /* usb0_otg_dp and usb0_otg_dm */ - usb_utmi_pins: pinmux_usb_utmi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) - >; - }; - - /* - * Note that the v3.0.8 stock userspace dynamically remuxes uart1 - * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 - * when not used. If needed, we can add rts pin remux later based - * on power measurements. - */ - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ - OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) - - /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ - OMAP4_IOPAD(0x13e, MUX_MODE1) - - /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ - OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) - - /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ - OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) - >; - }; - - /* uart3_tx_irtx and uart3_rx_irrx */ - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x196, MUX_MODE7) - OMAP4_IOPAD(0x198, MUX_MODE7) - OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1ba, MUX_MODE2) - OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) - OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) - >; - }; - - uart4_pins: pinmux_uart4_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ - OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ - OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ - OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ - >; - }; - - mcbsp2_pins: pinmux_mcbsp2_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ - OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ - OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ - OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ - >; - }; - - mcbsp3_pins: pinmux_mcbsp3_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ - OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ - OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ - OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ - >; - }; - - vibrator_direction_pin: pinmux_vibrator_direction_pin { - pinctrl-single,pins = < - OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ - >; - }; - - vibrator_enable_pin: pinmux_vibrator_enable_pin { - pinctrl-single,pins = < - OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ - >; - }; -}; - -&omap4_pmx_wkup { - usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { - /* gpio_wk0 */ - pinctrl-single,pins = < - OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) - >; - }; -}; - -/* Configure pwm clock source for timers 8 & 9 */ -&timer8 { - assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; -}; - -&timer9 { - assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; -}; - -/* - * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for - * uart1 wakeirq. - */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0xfc>; -}; - -&uart3 { - interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0x17c>; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; - - bluetooth { - compatible = "ti,wl1285-st"; - enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ - max-speed = <3686400>; - }; -}; - -&usbhsohci { - phys = <&fsusb1_phy>; - phy-names = "usb"; -}; - -&usbhsehci { - phys = <&hsusb2_phy>; -}; - -&usbhshost { - port1-mode = "ohci-phy-4pin-dpdm"; - port2-mode = "ehci-tll"; -}; - -/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ -&usb_otg_hs { - interface-type = <1>; - mode = <3>; - power = <50>; -}; - -&i2c4 { - ak8975: magnetometer@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio6>; - interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ - - rotation-matrix = "-1", "0", "0", - "0", "1", "0", - "0", "0", "-1"; - - }; - - lis3dh: accelerometer@18 { - compatible = "st,lis3dh-accel"; - reg = <0x18>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ - - rotation-matrix = "0", "-1", "0", - "1", "0", "0", - "0", "0", "1"; - }; -}; - -&mcbsp2 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp2_pins>; - status = "okay"; - - mcbsp2_port: port { - cpu_dai2: endpoint { - dai-format = "i2s"; - remote-endpoint = <&cpcap_audio_codec0>; - frame-master = <&cpcap_audio_codec0>; - bitclock-master = <&cpcap_audio_codec0>; - }; - }; -}; - -&mcbsp3 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp3_pins>; - status = "okay"; - - mcbsp3_port: port { - cpu_dai3: endpoint { - dai-format = "dsp_a"; - frame-master = <&cpcap_audio_codec1>; - bitclock-master = <&cpcap_audio_codec1>; - remote-endpoint = <&cpcap_audio_codec1>; - }; - }; -}; - -&cpcap_audio_codec0 { - remote-endpoint = <&cpu_dai2>; -}; - -&cpcap_audio_codec1 { - remote-endpoint = <&cpu_dai3>; }; diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi index 8e6662bb9e83..6c892fc9d726 100644 --- a/arch/arm/boot/dts/omap4-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi @@ -86,7 +86,6 @@ target-module@22000 { /* 0x40122000, ap 2 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp1"; reg = <0x2208c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -120,7 +119,6 @@ target-module@24000 { /* 0x40124000, ap 4 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp2"; reg = <0x2408c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -154,7 +152,6 @@ target-module@26000 { /* 0x40126000, ap 6 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp3"; reg = <0x2608c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -188,7 +185,6 @@ target-module@28000 { /* 0x40128000, ap 8 08.0 */ compatible = "ti,sysc-mcasp", "ti,sysc"; - ti,hwmods = "mcasp"; reg = <0x28000 0x4>, <0x28004 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index d60d5e0ecc4c..83f803be8ee2 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -381,7 +381,6 @@ target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "usb_otg_hs"; reg = <0x2b400 0x4>, <0x2b404 0x4>, <0x2b408 0x4>; @@ -580,7 +579,6 @@ target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0x74000 0x4>, <0x74010 0x4>; reg-names = "rev", "sysc"; @@ -1007,7 +1005,7 @@ ranges = <0x0 0x6000 0x2000>; prm: prm@0 { - compatible = "ti,omap4-prm"; + compatible = "ti,omap4-prm", "simple-bus"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1085,7 +1083,6 @@ gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x0 0x4>, <0x10 0x4>, <0x114 0x4>; @@ -1550,7 +1547,6 @@ target-module@55000 { /* 0x48055000, ap 15 0c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x55000 0x4>, <0x55010 0x4>, <0x55114 0x4>; @@ -1584,7 +1580,6 @@ target-module@57000 { /* 0x48057000, ap 17 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0x57000 0x4>, <0x57010 0x4>, <0x57114 0x4>; @@ -1618,7 +1613,6 @@ target-module@59000 { /* 0x48059000, ap 19 10.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0x59000 0x4>, <0x59010 0x4>, <0x59114 0x4>; @@ -1652,7 +1646,6 @@ target-module@5b000 { /* 0x4805b000, ap 21 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x5b000 0x4>, <0x5b010 0x4>, <0x5b114 0x4>; @@ -1686,7 +1679,6 @@ target-module@5d000 { /* 0x4805d000, ap 23 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x5d000 0x4>, <0x5d010 0x4>, <0x5d114 0x4>; @@ -2020,7 +2012,6 @@ target-module@96000 { /* 0x48096000, ap 37 26.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp4"; reg = <0x9608c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -2052,7 +2043,6 @@ target-module@98000 { /* 0x48098000, ap 49 22.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi1"; reg = <0x98000 0x4>, <0x98010 0x4>; reg-names = "rev", "sysc"; @@ -2091,7 +2081,6 @@ target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi2"; reg = <0x9a000 0x4>, <0x9a010 0x4>; reg-names = "rev", "sysc"; @@ -2232,7 +2221,6 @@ target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hdq1w"; reg = <0xb2000 0x4>, <0xb2014 0x4>, <0xb2018 0x4>; @@ -2289,7 +2277,6 @@ target-module@b8000 { /* 0x480b8000, ap 69 58.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi3"; reg = <0xb8000 0x4>, <0xb8010 0x4>; reg-names = "rev", "sysc"; @@ -2320,7 +2307,6 @@ target-module@ba000 { /* 0x480ba000, ap 71 32.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi4"; reg = <0xba000 0x4>, <0xba010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 7cc95bc1598b..a0a747b34691 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -148,7 +148,7 @@ l4_abe: interconnect@40100000 { }; - ocmcram: ocmcram@40304000 { + ocmcram: sram@40304000 { compatible = "mmio-sram"; reg = <0x40304000 0xa000>; /* 40k */ }; @@ -442,3 +442,29 @@ #include "omap4-l4.dtsi" #include "omap4-l4-abe.dtsi" #include "omap44xx-clocks.dtsi" + +&prm { + prm_tesla: prm@400 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_ivahd: prm@f00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1b00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi index dc9d0532f4cf..23aa90716f7f 100644 --- a/arch/arm/boot/dts/omap5-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -86,7 +86,6 @@ target-module@22000 { /* 0x40122000, ap 2 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp1"; reg = <0x2208c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -120,7 +119,6 @@ target-module@24000 { /* 0x40124000, ap 4 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp2"; reg = <0x2408c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -154,7 +152,6 @@ target-module@26000 { /* 0x40126000, ap 6 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp3"; reg = <0x2608c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 0960348002ad..25aacf1ba708 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -593,7 +593,6 @@ target-module@74000 { /* 0x4a0f4000, ap 25 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0x74000 0x4>, <0x74010 0x4>; reg-names = "rev", "sysc"; @@ -1033,7 +1032,6 @@ target-module@20000 { /* 0x48020000, ap 3 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x20050 0x4>, <0x20054 0x4>, <0x20058 0x4>; @@ -1176,7 +1174,6 @@ target-module@51000 { /* 0x48051000, ap 45 2e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio7"; reg = <0x51000 0x4>, <0x51010 0x4>, <0x51114 0x4>; @@ -1210,7 +1207,6 @@ target-module@53000 { /* 0x48053000, ap 35 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio8"; reg = <0x53000 0x4>, <0x53010 0x4>, <0x53114 0x4>; @@ -1244,7 +1240,6 @@ target-module@55000 { /* 0x48055000, ap 13 0e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x55000 0x4>, <0x55010 0x4>, <0x55114 0x4>; @@ -1278,7 +1273,6 @@ target-module@57000 { /* 0x48057000, ap 15 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0x57000 0x4>, <0x57010 0x4>, <0x57114 0x4>; @@ -1312,7 +1306,6 @@ target-module@59000 { /* 0x48059000, ap 17 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0x59000 0x4>, <0x59010 0x4>, <0x59114 0x4>; @@ -1346,7 +1339,6 @@ target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x5b000 0x4>, <0x5b010 0x4>, <0x5b114 0x4>; @@ -1380,7 +1372,6 @@ target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x5d000 0x4>, <0x5d010 0x4>, <0x5d114 0x4>; @@ -1414,7 +1405,6 @@ target-module@60000 { /* 0x48060000, ap 23 24.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x60000 0x8>, <0x60010 0x8>, <0x60090 0x8>; @@ -1446,7 +1436,6 @@ target-module@66000 { /* 0x48066000, ap 63 4c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0x66050 0x4>, <0x66054 0x4>, <0x66058 0x4>; @@ -1476,7 +1465,6 @@ target-module@68000 { /* 0x48068000, ap 53 54.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0x68050 0x4>, <0x68054 0x4>, <0x68058 0x4>; @@ -1506,7 +1494,6 @@ target-module@6a000 { /* 0x4806a000, ap 24 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x6a050 0x4>, <0x6a054 0x4>, <0x6a058 0x4>; @@ -1536,7 +1523,6 @@ target-module@6c000 { /* 0x4806c000, ap 26 22.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x6c050 0x4>, <0x6c054 0x4>, <0x6c058 0x4>; @@ -1566,7 +1552,6 @@ target-module@6e000 { /* 0x4806e000, ap 28 44.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0x6e050 0x4>, <0x6e054 0x4>, <0x6e058 0x4>; @@ -1596,7 +1581,6 @@ target-module@70000 { /* 0x48070000, ap 30 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0x70000 0x8>, <0x70010 0x8>, <0x70090 0x8>; @@ -1628,7 +1612,6 @@ target-module@72000 { /* 0x48072000, ap 32 1c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x72000 0x8>, <0x72010 0x8>, <0x72090 0x8>; @@ -1668,7 +1651,6 @@ target-module@7a000 { /* 0x4807a000, ap 81 2c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c4"; reg = <0x7a000 0x8>, <0x7a010 0x8>, <0x7a090 0x8>; @@ -1700,7 +1682,6 @@ target-module@7c000 { /* 0x4807c000, ap 83 34.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c5"; reg = <0x7c000 0x8>, <0x7c010 0x8>, <0x7c090 0x8>; @@ -1798,7 +1779,6 @@ target-module@98000 { /* 0x48098000, ap 47 08.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi1"; reg = <0x98000 0x4>, <0x98010 0x4>; reg-names = "rev", "sysc"; @@ -1837,7 +1817,6 @@ target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi2"; reg = <0x9a000 0x4>, <0x9a010 0x4>; reg-names = "rev", "sysc"; @@ -1871,7 +1850,6 @@ target-module@9c000 { /* 0x4809c000, ap 51 3a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x9c000 0x4>, <0x9c010 0x4>; reg-names = "rev", "sysc"; @@ -1931,7 +1909,6 @@ target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0xad000 0x4>, <0xad010 0x4>; reg-names = "rev", "sysc"; @@ -1972,7 +1949,6 @@ target-module@b4000 { /* 0x480b4000, ap 65 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xb4000 0x4>, <0xb4010 0x4>; reg-names = "rev", "sysc"; @@ -2005,7 +1981,6 @@ target-module@b8000 { /* 0x480b8000, ap 67 32.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi3"; reg = <0xb8000 0x4>, <0xb8010 0x4>; reg-names = "rev", "sysc"; @@ -2036,7 +2011,6 @@ target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi4"; reg = <0xba000 0x4>, <0xba010 0x4>; reg-names = "rev", "sysc"; @@ -2067,7 +2041,6 @@ target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc4"; reg = <0xd1000 0x4>, <0xd1010 0x4>; reg-names = "rev", "sysc"; @@ -2100,7 +2073,6 @@ target-module@d5000 { /* 0x480d5000, ap 73 30.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc5"; reg = <0xd5000 0x4>, <0xd5010 0x4>; reg-names = "rev", "sysc"; @@ -2296,7 +2268,6 @@ target-module@0 { /* 0x4ae10000, ap 5 10.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x0 0x4>, <0x10 0x4>, <0x114 0x4>; @@ -2331,7 +2302,6 @@ target-module@4000 { /* 0x4ae14000, ap 7 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x4000 0x4>, <0x4010 0x4>, <0x4014 0x4>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 1fb7937638f0..1f6ad1debc90 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -162,7 +162,7 @@ l4_abe: interconnect@40100000 { }; - ocmcram: ocmcram@40300000 { + ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x20000>; /* 128k */ }; @@ -435,3 +435,29 @@ #include "omap5-l4-abe.dtsi" #include "omap54xx-clocks.dtsi" + +&prm { + prm_dsp: prm@400 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_iva: prm@1200 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1200 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1c00 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c00 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi new file mode 100644 index 000000000000..05101a38c5bd --- /dev/null +++ b/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0xe0000>; // 896KB + label = "u-boot"; + }; + + u-boot-env@e0000 { + reg = <0xe0000 0x20000>; // 128KB + label = "u-boot-env"; + }; + + kernel@100000 { + reg = <0x100000 0x900000>; // 9MB + label = "kernel"; + }; + + rofs@a00000 { + reg = <0xa00000 0x5600000>; // 86MB + label = "rofs"; + }; + + rwfs@6000000 { + reg = <0x6000000 0x2000000>; // 32MB + label = "rwfs"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 56f51599852d..8ef26da32ff4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -206,6 +206,18 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; + sdhci: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x11c>, <0x7824000 0x800>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + bus-width = <8>; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_DCD_XO_CLK>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + blsp_dma: dma@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index bf402ae39226..26160394d717 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -221,6 +221,8 @@ regulator-max-microvolt = <2950000>; regulator-boot-on; + regulator-system-load = <200000>; + regulator-allow-set-load; }; l21 { @@ -272,14 +274,6 @@ }; }; - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - sdhc2_pin_a: sdhc2-pin-active { clk { pins = "sdc2_clk"; @@ -317,7 +311,7 @@ bus-width = <4>; pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + pinctrl-0 = <&sdhc2_pin_a>; }; usb@f9a55000 { @@ -344,6 +338,16 @@ }; }; }; + + imem@fe805000 { + status = "okay"; + + reboot-mode { + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 369e58f64145..9a84eb0cbbe6 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -217,6 +217,96 @@ }; }; }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; }; cpu-pmu { @@ -441,6 +531,8 @@ nvmem-cells = <&tsens_calib>, <&tsens_backup>; nvmem-cell-names = "calib", "calib_backup"; #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -1217,6 +1309,17 @@ clock-names = "iface"; }; }; + + imem@fe805000 { + status = "disabled"; + compatible = "syscon", "simple-mfd"; + reg = <0xfe805000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + }; + }; }; smd { diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index f198480c8ef4..c1f2012d1c8b 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -178,6 +178,16 @@ qcom,vs-soft-start-strength = <0>; regulator-initial-mode = <1>; }; + + pm8941_5vs2: 5vs2 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 83cc619861b2..6ec2cf7eb354 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -325,10 +325,10 @@ #size-cells = <0>; }; - /* - * IIC2 and I2C2 may be switched using pinmux. - * A fallback to GPIO is also provided. - */ + /* + * IIC2 and I2C2 may be switched using pinmux. + * A fallback to GPIO is also provided. + */ i2chdmi: i2c-12 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 42f3313e6988..48fbeb6340fd 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -65,81 +65,81 @@ compatible = "gpio-keys"; key-1 { - gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "SW2-1"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; }; key-2 { - gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "SW2-2"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; }; key-3 { - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "SW2-3"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; }; key-4 { - gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_4>; - label = "SW2-4"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; }; key-a { - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_A>; - label = "SW30"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + label = "SW30"; + wakeup-source; + debounce-interval = <20>; }; key-b { - gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_B>; - label = "SW31"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_B>; + label = "SW31"; + wakeup-source; + debounce-interval = <20>; }; key-c { - gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_C>; - label = "SW32"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_C>; + label = "SW32"; + wakeup-source; + debounce-interval = <20>; }; key-d { - gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_D>; - label = "SW33"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_D>; + label = "SW33"; + wakeup-source; + debounce-interval = <20>; }; key-e { - gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_E>; - label = "SW34"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_E>; + label = "SW34"; + wakeup-source; + debounce-interval = <20>; }; key-f { - gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_F>; - label = "SW35"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F>; + label = "SW35"; + wakeup-source; + debounce-interval = <20>; }; key-g { - gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_G>; - label = "SW36"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_G>; + label = "SW36"; + wakeup-source; + debounce-interval = <20>; }; }; diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/rda8810pl.dtsi index 19cde895bf65..f30d6ece49fb 100644 --- a/arch/arm/boot/dts/rda8810pl.dtsi +++ b/arch/arm/boot/dts/rda8810pl.dtsi @@ -33,6 +33,21 @@ ranges; }; + modem@10000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0xfffffff>; + + gpioc@1a08000 { + compatible = "rda,8810pl-gpio"; + reg = <0x1a08000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + }; + }; + apb@20800000 { compatible = "simple-bus"; #address-cells = <1>; @@ -60,6 +75,39 @@ <17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hwtimer", "ostimer"; }; + + gpioa@30000 { + compatible = "rda,8810pl-gpio"; + reg = <0x30000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpiob@31000 { + compatible = "rda,8810pl-gpio"; + reg = <0x31000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpiod@32000 { + compatible = "rda,8810pl-gpio"; + reg = <0x32000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + }; }; apb@20a00000 { diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index c776321b2cc4..c70182c5aeb1 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -696,8 +696,8 @@ hdmi { hdmi_ctl: hdmi-ctl { - rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, - <1 RK_PB1 1 &pcfg_pull_none>, + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, + <1 RK_PB1 1 &pcfg_pull_none>, <1 RK_PB2 1 &pcfg_pull_none>, <1 RK_PB3 1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 9f9e2bfd1295..44bb5e6f83b1 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -230,14 +230,14 @@ }; emmc { - emmc_reset: emmc-reset { - rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; + emmc_reset: emmc-reset { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; gmac { phy_rst: phy-rst { - rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 81e4e953d4a4..0aeef23ca3db 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -382,18 +382,15 @@ pmic { pmic_int: pmic-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO \ - &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; dvs_1: dvs-1 { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO \ - &pcfg_pull_down>; + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO \ - &pcfg_pull_down>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -406,8 +403,7 @@ }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 RK_PC4 1 \ - &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { @@ -432,7 +428,7 @@ sdio { wifi_enable: wifi-enable { rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>, - <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 445270aa136e..51208d161d65 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -17,6 +17,7 @@ rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>; rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>; rockchip,headset-codec = <&headsetcodec>; + rockchip,hdmi-codec = <&hdmi>; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi index b12e061c5f7f..300a7e32c978 100644 --- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi @@ -41,39 +41,8 @@ backlight: backlight { compatible = "pwm-backlight"; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; default-brightness-level = <128>; enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 80386203e85b..a4966e505a2f 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -20,39 +20,8 @@ &backlight { /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ - brightness-levels = < - 0 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; + brightness-levels = <0 8 255>; + num-interpolated-steps = <247>; }; &rk808 { diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index aa352d40c991..06a6a9554c48 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -28,6 +28,13 @@ regulator-boot-on; vin-supply = <&vcc33_sys>; }; + + sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "VEYRON-HDMI"; + rockchip,hdmi-codec = <&hdmi>; + rockchip,i2s-controller = <&i2s>; + }; }; &cpu_thermal { diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 55955b082501..c833716dbe48 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -38,39 +38,8 @@ &backlight { /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = < - 0 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; + brightness-levels = <0 3 255>; + num-interpolated-steps = <252>; }; &i2c_tunnel { diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts index 27557203ae33..bebb230e592f 100644 --- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -23,39 +23,8 @@ &backlight { /* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = < - 0 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; + brightness-levels = <0 3 255>; + num-interpolated-steps = <252>; }; &backlight_regulator { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cc893e154fe5..415c75f5783c 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1023,7 +1023,7 @@ vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff930000 0x0 0x19c>; + reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; @@ -1073,7 +1073,7 @@ vopl: vop@ff940000 { compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff940000 0x0 0x19c>; + reg = <0x0 0xff940000 0x0 0x19c>, <0x0 0xff941000 0x0 0x1000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; @@ -1391,6 +1391,9 @@ clocks = <&cru PCLK_EFUSE256>; clock-names = "pclk_efuse"; + cpu_id: cpu-id@7 { + reg = <0x07 0x10>; + }; cpu_leakage: cpu_leakage@17 { reg = <0x17 0x1>; }; diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 0e159c884f97..1aeac33b0d34 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -165,6 +165,10 @@ }; }; +&clocks { + clocks = <&fin_pll>; +}; + &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index a9a5689dc462..3bf6c450a26e 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -69,6 +69,10 @@ }; }; +&clocks { + clocks = <&fin_pll>; +}; + &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2e2c1a7b1d1d..565204816e34 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -689,7 +689,7 @@ #clock-cells = <0>; }; - rtc@f80480b0 { + rtc: rtc@f80480b0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xf80480b0 0x30>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts index b4c0a76a4d1a..2b645642b935 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -19,7 +19,7 @@ m25p,fast-read; cdns,page-size = <256>; cdns,block-size = <16>; - cdns,read-delay = <4>; + cdns,read-delay = <3>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index ba08624c6237..58288aa53fee 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@00000000 { device_type = "memory"; reg = <0x00000000 0x2000000>; }; @@ -234,7 +234,6 @@ status = "okay"; pinctrl-0 = <<dc_pins>; pinctrl-names = "default"; - dma-ranges; port { ltdc_out_rgb: endpoint { diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index 2b1664884ae7..fcc804e3c158 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x2000000>; }; @@ -95,7 +95,6 @@ joystick { compatible = "gpio-keys"; - #size-cells = <0>; pinctrl-0 = <&joystick_pins>; pinctrl-names = "default"; button-0 { diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index e19d0fe7dbda..30c0f6717871 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -59,7 +59,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@90000000 { device_type = "memory"; reg = <0x90000000 0x800000>; }; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index a3ff04940aec..f3ce477b7bae 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@00000000 { device_type = "memory"; reg = <0x00000000 0x1000000>; }; @@ -166,7 +166,6 @@ }; <dc { - dma-ranges; status = "okay"; port { diff --git a/arch/arm/boot/dts/stm32f469.dtsi b/arch/arm/boot/dts/stm32f469.dtsi index 5ae5213f68cb..be002e8a78ac 100644 --- a/arch/arm/boot/dts/stm32f469.dtsi +++ b/arch/arm/boot/dts/stm32f469.dtsi @@ -8,7 +8,6 @@ dsi: dsi@40016c00 { compatible = "st,stm32-dsi"; reg = <0x40016c00 0x800>; - interrupts = <92>; resets = <&rcc STM32F4_APB2_RESET(DSI)>; reset-names = "apb"; clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index 0ba9c5b08ab9..569d23cc61e5 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x800000>; }; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 6f1d0ac8c31c..1626e00bb2cb 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x1000000>; }; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index 3acd2e9c434e..e446d311c520 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -53,7 +53,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@d0000000 { device_type = "memory"; reg = <0xd0000000 0x2000000>; }; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index e4d3c58f3d97..8f398178f5e5 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -53,7 +53,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@d0000000 { device_type = "memory"; reg = <0xd0000000 0x2000000>; }; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 0a3a7d66737b..3d1ecb408b03 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -137,6 +137,22 @@ status = "disabled"; }; + adc12_ain_pins_a: adc12-ain-0 { + pins { + pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ + <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */ + <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */ + }; + }; + + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ + <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */ + }; + }; + cec_pins_a: cec-0 { pins { pinmux = <STM32_PINMUX('A', 15, AF4)>; @@ -167,6 +183,18 @@ }; }; + dac_ch1_pins_a: dac-ch1 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>; + }; + }; + + dac_ch2_pins_a: dac-ch2 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>; + }; + }; + dcmi_pins_a: dcmi-0 { pins { pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 2e4742c53d04..628c74a45a25 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -252,14 +252,13 @@ regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; interrupt-parent = <&pmic>; - regulator-active-discharge; }; vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; interrupt-parent = <&pmic>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -282,6 +281,11 @@ status = "okay"; }; +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 0615d1c8a6fc..984a47cbd13d 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -25,6 +25,7 @@ }; memory@c0000000 { + device_type = "memory"; reg = <0xc0000000 0x20000000>; }; @@ -92,7 +93,34 @@ "Playback" , "MCLK", "Capture" , "MCLK", "MICL" , "Mic Bias"; - dais = <&sai2a_port &sai2b_port>; + dais = <&sai2a_port &sai2b_port &i2s2_port>; + status = "okay"; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "disabled"; + adc1: adc@0 { + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (56 + 47kOhms) * 5pF => 2.5us. + * Use arbitrary margin here (e.g. 5us). + */ + st,min-sample-time-nsecs = <5000>; + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 6 13 18 19>; + status = "okay"; + }; + adc2: adc@100 { + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 2 6 18 19>; + st,min-sample-time-nsecs = <5000>; status = "okay"; }; }; @@ -146,9 +174,7 @@ reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpiog>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; + #sound-dai-cells = <0>; status = "okay"; ports { @@ -161,6 +187,13 @@ remote-endpoint = <<dc_ep0_out>; }; }; + + port@3 { + reg = <3>; + sii9022_tx_endpoint: endpoint { + remote-endpoint = <&i2s2_endpoint>; + }; + }; }; }; @@ -226,7 +259,7 @@ vddcore: buck1 { regulator-name = "vddcore"; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-initial-mode = <0>; @@ -327,7 +360,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -346,6 +379,23 @@ }; }; +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_a>; + pinctrl-1 = <&i2s2_pins_sleep_a>; + status = "okay"; + + i2s2_port: port { + i2s2_endpoint: endpoint { + remote-endpoint = <&sii9022_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + }; + }; +}; + &ipcc { status = "okay"; }; @@ -356,6 +406,9 @@ }; <dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; status = "okay"; port { @@ -379,6 +432,11 @@ status = "okay"; }; +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + &rng1 { status = "okay"; }; @@ -449,3 +507,10 @@ pinctrl-0 = <&uart4_pins_a>; status = "okay"; }; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 20ea601a546d..d26adcbeba33 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -11,14 +11,6 @@ / { model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; - - reg18: reg18 { - compatible = "regulator-fixed"; - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; }; &dsi { @@ -61,6 +53,19 @@ }; }; +&i2c1 { + touchscreen@38 { + compatible = "focaltech,ft6236"; + reg = <0x38>; + interrupts = <2 2>; + interrupt-parent = <&gpiof>; + interrupt-controller; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + status = "okay"; + }; +}; + <dc { status = "okay"; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 1d426ea8bdaf..b8cc0fb0ec48 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -74,22 +74,6 @@ serial0 = &uart4; }; - reg11: reg11 { - compatible = "regulator-fixed"; - regulator-name = "reg11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - reg18: reg18 { - compatible = "regulator-fixed"; - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - sd_switch: regulator-sd_switch { compatible = "regulator-gpio"; regulator-name = "sd_switch"; @@ -100,7 +84,21 @@ gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>; gpios-states = <0>; - states = <1800000 0x1 2900000 0x0>; + states = <1800000 0x1>, + <2900000 0x0>; + }; +}; + +&dac { + pinctrl-names = "default"; + pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; + vref-supply = <&vdda>; + status = "disabled"; + dac1: dac@1 { + status = "okay"; + }; + dac2: dac@2 { + status = "okay"; }; }; @@ -143,7 +141,7 @@ vddcore: buck1 { regulator-name = "vddcore"; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-initial-mode = <0>; @@ -241,7 +239,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -279,6 +277,11 @@ status = "okay"; }; +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 91fc0a315c49..3789312c8539 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -32,7 +32,6 @@ joystick { compatible = "gpio-keys"; - #size-cells = <0>; pinctrl-0 = <&joystick_pins>; pinctrl-names = "default"; button-0 { @@ -335,14 +334,12 @@ &usbh_ehci { phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; &usbotg_hs { dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; - phy-names = "usb2-phy"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index f98e0370c0bc..ed8b258256d7 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -1079,6 +1079,29 @@ #reset-cells = <1>; }; + pwr_regulators: pwr@50001000 { + compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; + + reg11: reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18: reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33: usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp1-exti", "syscon"; interrupt-controller; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 7033a123c9a3..d6bb82c295f0 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -130,7 +130,7 @@ &i2c1 { status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c16"; pagesize = <16>; reg = <0x50>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index ac7638078420..2cf34ae1c17b 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -469,7 +469,6 @@ <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; resets = <&ccu RST_AHB1_HDMI>; - reset-names = "ahb"; dma-names = "ddc-tx", "ddc-rx", "audio-tx"; dmas = <&dma 13>, <&dma 13>, <&dma 14>; status = "disabled"; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 3bec3e0a81b2..2fd31a0a0b34 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -164,6 +164,22 @@ status = "okay"; }; +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ + reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */ + vcc-supply = <®_ldo_io0>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + &i2c1 { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 74bb053cf23c..53c38deb8a08 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -583,6 +583,15 @@ reg = <0x1c14000 0x400>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-a83t-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts new file mode 100644 index 000000000000..c73f59900975 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Karl Palsson <karlp@tweak.net.au> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "FriendlyARM NanoPi Duo2"; + compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "nanopi:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status { + label = "nanopi:green:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + + k1 { + label = "k1"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ + }; + }; + + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50>; /* 4ms */ + + enable-active-high; + enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vdd_sys: vdd-sys { + compatible = "regulator-fixed"; + regulator-name = "vdd-sys"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; + +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index e37c30e811d3..fe773c72a69b 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -120,6 +120,19 @@ }; soc { + deinterlace: deinterlace@1400000 { + compatible = "allwinner,sun8i-h3-deinterlace"; + reg = <0x01400000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + <&ccu CLK_DRAM_DEINTERLACE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + syscon: system-control@1c00000 { compatible = "allwinner,sun8i-h3-system-control"; reg = <0x01c00000 0x1000>; @@ -153,6 +166,15 @@ allwinner,sram = <&ve_sram 1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-h3-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index c9c2688db66d..421dfbbfd7ee 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -266,6 +266,15 @@ #phy-cells = <1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-r40-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + ehci1: usb@1c19000 { compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; reg = <0x01c19000 0x100>; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index b9b6fb00be28..1d900f591d5f 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -457,6 +457,15 @@ reg = <0x01700000 0x100>; }; + crypto: crypto@1c02000 { + compatible = "allwinner,sun9i-a80-crypto"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; @@ -947,6 +956,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x06000ca0 0x20>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; pio: pinctrl@6000800 { @@ -1154,6 +1164,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; prcm@8001400 { diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 107eeafad20a..0afea59486c2 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -109,6 +109,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + dma-ranges; ranges; display_clocks: clock@1000000 { @@ -478,6 +479,11 @@ function = "uart2"; }; + uart2_rts_cts_pins: uart2-rts-cts-pins { + pins = "PA2", "PA3"; + function = "uart2"; + }; + uart3_pins: uart3-pins { pins = "PA13", "PA14"; function = "uart3"; @@ -544,6 +550,14 @@ }; }; + mbus: dram-controller@1c62000 { + compatible = "allwinner,sun8i-h3-mbus"; + reg = <0x01c62000 0x1000>; + clocks = <&ccu 113>; + dma-ranges = <0x00000000 0x40000000 0xc0000000>; + #interconnect-cells = <1>; + }; + spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi index 9af21fe93a5c..fb6b3e1a0b1f 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi @@ -1,5 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 / { + apbmisc@70000800 { + nvidia,long-ram-code; + }; + clock@60006000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -52,7 +56,154 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_M>; clock-names = "emc-parent"; }; - /* TODO: Add 528MHz frequency */ + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + + emc-timings-4 { + nvidia,ram-code = <4>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + + emc-timings-6 { + nvidia,ram-code = <6>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; timing-600000000 { clock-frequency = <600000000>; nvidia,parent-clock-frequency = <600000000>; @@ -94,149 +245,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000060 - 0x00000000 - 0x00000018 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000007 - 0x0000000f - 0x00000005 - 0x00000005 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000064 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000007 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x800001c5 - 0x0000000a + 0x00000000 /* EMC_RC */ + 0x00000003 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -262,149 +413,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000000 - 0x00000005 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x0000009a - 0x00000000 - 0x00000026 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000007 - 0x0000000f - 0x00000006 - 0x00000006 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000005 - 0x00000005 - 0x000000a0 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x0000000b - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x8000023a - 0x0000000a + 0x00000000 /* EMC_RC */ + 0x00000005 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x0000009a /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000006 /* EMC_TXSR */ + 0x00000006 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000a0 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x0000000b /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000023a /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -430,149 +581,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000001 - 0x0000000a - 0x00000000 - 0x00000001 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000134 - 0x00000000 - 0x0000004d - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000008 - 0x0000000f - 0x0000000c - 0x0000000c - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000005 - 0x00000005 - 0x0000013f - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000015 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x80000370 - 0x0000000a + 0x00000001 /* EMC_RC */ + 0x0000000a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000134 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000c /* EMC_TXSR */ + 0x0000000c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000013f /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000015 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000370 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -598,149 +749,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000003 - 0x00000011 - 0x00000000 - 0x00000002 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000202 - 0x00000000 - 0x00000080 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x0000000f - 0x0000000f - 0x00000013 - 0x00000013 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000001 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000213 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000022 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x8000050e - 0x0000000a + 0x00000003 /* EMC_RC */ + 0x00000011 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000002 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000202 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000013 /* EMC_TXSR */ + 0x00000013 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000213 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000022 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000050e /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -766,149 +917,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000004 - 0x0000001a - 0x00000000 - 0x00000003 - 0x00000001 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000001 - 0x00000001 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000304 - 0x00000000 - 0x000000c1 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000018 - 0x0000000f - 0x0000001c - 0x0000001c - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000003 - 0x00000000 - 0x00000005 - 0x00000005 - 0x0000031c - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000033 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x80000713 - 0x0000000a + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000304 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000018 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000033 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -934,149 +1085,149 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x00000009 - 0x00000035 - 0x00000000 - 0x00000007 - 0x00000002 - 0x00000005 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000002 - 0x00000002 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000004 - 0x00000006 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000003 - 0x0000000d - 0x0000000f - 0x00000011 - 0x00000607 - 0x00000000 - 0x00000181 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000032 - 0x0000000f - 0x00000038 - 0x00000038 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000007 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000638 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00090000 - 0x00090000 - 0x00094000 - 0x00094000 - 0x00009400 - 0x00009000 - 0x00009000 - 0x00009000 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000066 - 0x00000000 - 0x00000100 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000d2b3 - 0x80000d22 - 0x0000000a + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000004 /* EMC_EINPUT */ + 0x00000006 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000003 /* EMC_QRST */ + 0x0000000d /* EMC_QSAFE */ + 0x0000000f /* EMC_RDV */ + 0x00000011 /* EMC_RDV_MASK */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000032 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00090000 /* EMC_DLL_XFORM_DQ0 */ + 0x00090000 /* EMC_DLL_XFORM_DQ1 */ + 0x00094000 /* EMC_DLL_XFORM_DQ2 */ + 0x00094000 /* EMC_DLL_XFORM_DQ3 */ + 0x00009400 /* EMC_DLL_XFORM_DQ4 */ + 0x00009000 /* EMC_DLL_XFORM_DQ5 */ + 0x00009000 /* EMC_DLL_XFORM_DQ6 */ + 0x00009000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000066 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000d2b3 /* EMC_CFG_PIPE */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -1102,149 +1253,149 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x0000000d - 0x0000004c - 0x00000000 - 0x00000009 - 0x00000003 - 0x00000004 - 0x00000008 - 0x00000002 - 0x00000009 - 0x00000003 - 0x00000003 - 0x00000002 - 0x00000002 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000005 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000007 - 0x00020000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000001 - 0x0000000e - 0x00000010 - 0x00000012 - 0x000008e4 - 0x00000000 - 0x00000239 - 0x00000001 - 0x00000008 - 0x00000001 - 0x00000000 - 0x0000004a - 0x0000000e - 0x00000051 - 0x00000200 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000009 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000924 - 0x00000000 - 0x00000000 - 0x00000000 - 0x104ab098 - 0x002c00a0 - 0x00008000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00098000 - 0x00098000 - 0x00000000 - 0x00098000 - 0x00098000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00060000 - 0x00060000 - 0x00060000 - 0x00060000 - 0x00006000 - 0x00006000 - 0x00006000 - 0x00006000 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x51451420 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000096 - 0x00000000 - 0x00000100 - 0x0174000c - 0x00000000 - 0x00000003 - 0x000052a3 - 0x800012d7 - 0x00000009 + 0x0000000d /* EMC_RC */ + 0x0000004c /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000009 /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000007 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x0000000e /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x000008e4 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000004a /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x00000051 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000924 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00060000 /* EMC_DLL_XFORM_DQ0 */ + 0x00060000 /* EMC_DLL_XFORM_DQ1 */ + 0x00060000 /* EMC_DLL_XFORM_DQ2 */ + 0x00060000 /* EMC_DLL_XFORM_DQ3 */ + 0x00006000 /* EMC_DLL_XFORM_DQ4 */ + 0x00006000 /* EMC_DLL_XFORM_DQ5 */ + 0x00006000 /* EMC_DLL_XFORM_DQ6 */ + 0x00006000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000096 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0174000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ >; }; @@ -1270,149 +1421,317 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x00000012 - 0x00000065 - 0x00000000 - 0x0000000c - 0x00000004 - 0x00000005 - 0x00000008 - 0x00000002 - 0x0000000a - 0x00000004 - 0x00000004 - 0x00000002 - 0x00000002 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000005 - 0x00000002 - 0x00000000 - 0x00000001 - 0x00000008 - 0x00020000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x0000000f - 0x00000010 - 0x00000012 - 0x00000bd1 - 0x00000000 - 0x000002f4 - 0x00000001 - 0x00000008 - 0x00000001 - 0x00000000 - 0x00000063 - 0x0000000f - 0x0000006b - 0x00000200 - 0x00000004 - 0x00000005 - 0x00000004 - 0x0000000d - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000c11 - 0x00000000 - 0x00000000 - 0x00000000 - 0x104ab098 - 0x002c00a0 - 0x00008000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00070000 - 0x00070000 - 0x00000000 - 0x00070000 - 0x00070000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00048000 - 0x00048000 - 0x00048000 - 0x00048000 - 0x00004800 - 0x00004800 - 0x00004800 - 0x00004800 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x51451420 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x000000c6 - 0x00000000 - 0x00000100 - 0x015b000c - 0x00000000 - 0x00000003 - 0x000052a3 - 0x8000188b - 0x00000009 + 0x00000012 /* EMC_RC */ + 0x00000065 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000001 /* EMC_EINPUT */ + 0x00000008 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000000 /* EMC_QRST */ + 0x0000000f /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x00000bd1 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000063 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006b /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x0000000d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c11 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x00004800 /* EMC_DLL_XFORM_DQ4 */ + 0x00004800 /* EMC_DLL_XFORM_DQ5 */ + 0x00004800 /* EMC_DLL_XFORM_DQ6 */ + 0x00004800 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x000000c6 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x015b000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x8000188b /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x013a000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 /* EMC_RC */ + 0x00000088 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000011 /* EMC_RAS */ + 0x00000006 /* EMC_RP */ + 0x00000006 /* EMC_R2W */ + 0x00000009 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000d /* EMC_W2P */ + 0x00000006 /* EMC_RD_RCD */ + 0x00000006 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000007 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000009 /* EMC_EINPUT_DURATION */ + 0x00040000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000010 /* EMC_QSAFE */ + 0x00000013 /* EMC_RDV */ + 0x00000015 /* EMC_RDV_MASK */ + 0x00000fd6 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000b /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000084 /* EMC_AR2PDEN */ + 0x00000012 /* EMC_RW2PDEN */ + 0x0000008f /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000013 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001017 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe01200b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x013a000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000042a0 /* EMC_CFG_PIPE */ + 0x80002062 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000b /* EMC_QPOP */ >; }; @@ -1438,149 +1757,149 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x0000001c - 0x0000009a - 0x00000000 - 0x00000013 - 0x00000007 - 0x00000007 - 0x0000000b - 0x00000003 - 0x00000010 - 0x00000007 - 0x00000007 - 0x00000002 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x0000000a - 0x00000002 - 0x00000000 - 0x00000003 - 0x0000000b - 0x00070000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000002 - 0x00000012 - 0x00000016 - 0x00000018 - 0x00001208 - 0x00000000 - 0x00000482 - 0x00000002 - 0x0000000d - 0x00000001 - 0x00000000 - 0x00000096 - 0x00000015 - 0x000000a2 - 0x00000200 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000015 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00001249 - 0x00000000 - 0x00000000 - 0x00000000 - 0x104ab098 - 0xe00e00b1 - 0x00008000 - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00048000 - 0x00048000 - 0x00000000 - 0x00048000 - 0x00048000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x00000004 - 0x00000002 - 0x00000005 - 0x00000006 - 0x00000003 - 0x00000006 - 0x00000005 - 0x00000004 - 0x00000004 - 0x00000002 - 0x00000005 - 0x00000006 - 0x00000003 - 0x00000006 - 0x00000005 - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x100002a0 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc085 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x51451420 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0606003f - 0x00000000 - 0x00000000 - 0x00000100 - 0x0128000c - 0x00000000 - 0x00000003 - 0x000040a0 - 0x800024aa - 0x0000000e + 0x0000001c /* EMC_RC */ + 0x0000009a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000013 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000007 /* EMC_R2W */ + 0x0000000b /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000010 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x0000000a /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000003 /* EMC_EINPUT */ + 0x0000000b /* EMC_EINPUT_DURATION */ + 0x00070000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000002 /* EMC_QRST */ + 0x00000012 /* EMC_QSAFE */ + 0x00000016 /* EMC_RDV */ + 0x00000018 /* EMC_RDV_MASK */ + 0x00001208 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000d /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000096 /* EMC_AR2PDEN */ + 0x00000015 /* EMC_RW2PDEN */ + 0x000000a2 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001249 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe00e00b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0128000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000040a0 /* EMC_CFG_PIPE */ + 0x800024aa /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000e /* EMC_QPOP */ >; }; @@ -1606,152 +1925,3855 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x00000025 - 0x000000cc - 0x00000000 - 0x0000001a - 0x00000009 - 0x00000008 - 0x0000000d - 0x00000004 - 0x00000013 - 0x00000009 - 0x00000009 - 0x00000003 - 0x00000002 - 0x00000000 - 0x00000006 - 0x00000006 - 0x0000000b - 0x00000002 - 0x00000000 - 0x00000002 - 0x0000000d - 0x00080000 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000001 - 0x00000014 - 0x00000018 - 0x0000001a - 0x000017e2 - 0x00000000 - 0x000005f8 - 0x00000003 - 0x00000011 - 0x00000001 - 0x00000000 - 0x000000c6 - 0x00000018 - 0x000000d6 - 0x00000200 - 0x00000005 - 0x00000006 - 0x00000005 - 0x0000001d - 0x00000000 - 0x00000008 - 0x00000008 - 0x00001822 - 0x00000000 - 0x80000005 - 0x00000000 - 0x104ab198 - 0xe00700b1 - 0x00008000 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00034000 - 0x00034000 - 0x00000000 - 0x00034000 - 0x00034000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000008 - 0x00000008 - 0x00000005 - 0x00000009 - 0x00000009 - 0x00000007 - 0x00000009 - 0x00000008 - 0x00000008 - 0x00000008 - 0x00000005 - 0x00000009 - 0x00000009 - 0x00000007 - 0x00000009 - 0x00000008 - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x100002a0 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc085 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x61861820 - 0x00514514 - 0x00514514 - 0x61861800 - 0x0606003f - 0x00000000 - 0x00000000 - 0x00000100 - 0x00f8000c - 0x00000007 - 0x00000004 - 0x00004080 - 0x80003012 - 0x0000000f + 0x00000025 /* EMC_RC */ + 0x000000cc /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000008 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x0000000b /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x0000000d /* EMC_EINPUT_DURATION */ + 0x00080000 /* EMC_PUTERM_EXTRA */ + 0x00000004 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000014 /* EMC_QSAFE */ + 0x00000018 /* EMC_RDV */ + 0x0000001a /* EMC_RDV_MASK */ + 0x000017e2 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000011 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000c6 /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d6 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000006 /* EMC_TCKESR */ + 0x00000005 /* EMC_TPD */ + 0x0000001d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000008 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001822 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x80000005 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab198 /* EMC_FBIO_CFG5 */ + 0xe00700b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000005 /* EMC_DLL_XFORM_DQS0 */ + 0x00000005 /* EMC_DLL_XFORM_DQS1 */ + 0x00000005 /* EMC_DLL_XFORM_DQS2 */ + 0x00000005 /* EMC_DLL_XFORM_DQS3 */ + 0x00000005 /* EMC_DLL_XFORM_DQS4 */ + 0x00000005 /* EMC_DLL_XFORM_DQS5 */ + 0x00000005 /* EMC_DLL_XFORM_DQS6 */ + 0x00000005 /* EMC_DLL_XFORM_DQS7 */ + 0x00000005 /* EMC_DLL_XFORM_DQS8 */ + 0x00000005 /* EMC_DLL_XFORM_DQS9 */ + 0x00000005 /* EMC_DLL_XFORM_DQS10 */ + 0x00000005 /* EMC_DLL_XFORM_DQS11 */ + 0x00000005 /* EMC_DLL_XFORM_DQS12 */ + 0x00000005 /* EMC_DLL_XFORM_DQS13 */ + 0x00000005 /* EMC_DLL_XFORM_DQS14 */ + 0x00000005 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000a /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x0000000a /* EMC_DLL_XFORM_DQ4 */ + 0x0000000a /* EMC_DLL_XFORM_DQ5 */ + 0x0000000a /* EMC_DLL_XFORM_DQ6 */ + 0x0000000a /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x61861820 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x61861800 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f8000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000007 /* EMC_CTT */ + 0x00000004 /* EMC_CTT_DURATION */ + 0x00004080 /* EMC_CFG_PIPE */ + 0x80003012 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000f /* EMC_QPOP */ + >; + }; + }; + + emc-timings-4 { + nvidia,ram-code = <4>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000004 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000007 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x0000009a /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000008 /* EMC_TXSR */ + 0x00000008 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000a0 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x0000000b /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000023a /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x0000000e /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000134 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000c /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000f /* EMC_TXSR */ + 0x0000000f /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000013f /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000015 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000370 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 /* EMC_RC */ + 0x00000017 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000002 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000202 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000015 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000019 /* EMC_TXSR */ + 0x00000019 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000213 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000022 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000050e /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x00000023 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000304 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000021 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000025 /* EMC_TXSR */ + 0x00000025 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000033 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000047 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000006 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000004 /* EMC_EINPUT */ + 0x00000006 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000003 /* EMC_QRST */ + 0x0000000d /* EMC_QSAFE */ + 0x0000000f /* EMC_RDV */ + 0x00000011 /* EMC_RDV_MASK */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000044 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000004a /* EMC_TXSR */ + 0x0000004a /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00090000 /* EMC_DLL_XFORM_DQ0 */ + 0x00090000 /* EMC_DLL_XFORM_DQ1 */ + 0x00094000 /* EMC_DLL_XFORM_DQ2 */ + 0x00094000 /* EMC_DLL_XFORM_DQ3 */ + 0x00009400 /* EMC_DLL_XFORM_DQ4 */ + 0x00009000 /* EMC_DLL_XFORM_DQ5 */ + 0x00009000 /* EMC_DLL_XFORM_DQ6 */ + 0x00009000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000066 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000d2b3 /* EMC_CFG_PIPE */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000321>; + nvidia,emc-mrs-wait-cnt = <0x0117000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d /* EMC_RC */ + 0x00000067 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000009 /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000007 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x0000000e /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x000008e4 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000065 /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x0000006c /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000924 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00060000 /* EMC_DLL_XFORM_DQ0 */ + 0x00060000 /* EMC_DLL_XFORM_DQ1 */ + 0x00060000 /* EMC_DLL_XFORM_DQ2 */ + 0x00060000 /* EMC_DLL_XFORM_DQ3 */ + 0x00006000 /* EMC_DLL_XFORM_DQ4 */ + 0x00006000 /* EMC_DLL_XFORM_DQ5 */ + 0x00006000 /* EMC_DLL_XFORM_DQ6 */ + 0x00006000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000096 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0117000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000521>; + nvidia,emc-mrs-wait-cnt = <0x00f5000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000011 /* EMC_RC */ + 0x00000089 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000001 /* EMC_EINPUT */ + 0x00000008 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000000 /* EMC_QRST */ + 0x0000000f /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x00000bd1 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000087 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000008f /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x0000000d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c11 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x00004800 /* EMC_DLL_XFORM_DQ4 */ + 0x00004800 /* EMC_DLL_XFORM_DQ5 */ + 0x00004800 /* EMC_DLL_XFORM_DQ6 */ + 0x00004800 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x000000c6 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f5000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x8000188b /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000941>; + nvidia,emc-mrs-wait-cnt = <0x00c8000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 /* EMC_RC */ + 0x000000b7 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000010 /* EMC_RAS */ + 0x00000006 /* EMC_RP */ + 0x00000006 /* EMC_R2W */ + 0x00000009 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000d /* EMC_W2P */ + 0x00000006 /* EMC_RD_RCD */ + 0x00000006 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000007 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000009 /* EMC_EINPUT_DURATION */ + 0x00040000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000010 /* EMC_QSAFE */ + 0x00000013 /* EMC_RDV */ + 0x00000015 /* EMC_RDV_MASK */ + 0x00000fd6 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000b /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000b4 /* EMC_AR2PDEN */ + 0x00000012 /* EMC_RW2PDEN */ + 0x000000bf /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000013 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001017 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe01200b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00c8000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000042a0 /* EMC_CFG_PIPE */ + 0x80002062 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000b /* EMC_QPOP */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000b61>; + nvidia,emc-mrs-wait-cnt = <0x00b0000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001b /* EMC_RC */ + 0x000000d0 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000013 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000007 /* EMC_R2W */ + 0x0000000b /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000010 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x0000000a /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000003 /* EMC_EINPUT */ + 0x0000000b /* EMC_EINPUT_DURATION */ + 0x00070000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000002 /* EMC_QRST */ + 0x00000012 /* EMC_QSAFE */ + 0x00000016 /* EMC_RDV */ + 0x00000018 /* EMC_RDV_MASK */ + 0x00001208 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000d /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000cc /* EMC_AR2PDEN */ + 0x00000015 /* EMC_RW2PDEN */ + 0x000000d8 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001249 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe00e00b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00b0000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000040a0 /* EMC_CFG_PIPE */ + 0x800024aa /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000e /* EMC_QPOP */ + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0080089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200418>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000d71>; + nvidia,emc-mrs-wait-cnt = <0x006f000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000024 /* EMC_RC */ + 0x00000114 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000019 /* EMC_RAS */ + 0x0000000a /* EMC_RP */ + 0x00000008 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x0000000a /* EMC_RD_RCD */ + 0x0000000a /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x0000000b /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x0000000d /* EMC_EINPUT_DURATION */ + 0x00080000 /* EMC_PUTERM_EXTRA */ + 0x00000004 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000014 /* EMC_QSAFE */ + 0x00000018 /* EMC_RDV */ + 0x0000001a /* EMC_RDV_MASK */ + 0x000017e2 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000011 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000010d /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x0000011e /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000006 /* EMC_TCKESR */ + 0x00000005 /* EMC_TPD */ + 0x0000001d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000008 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001822 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x80000005 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab198 /* EMC_FBIO_CFG5 */ + 0xe00700b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x007fc007 /* EMC_DLL_XFORM_DQS0 */ + 0x007fc008 /* EMC_DLL_XFORM_DQS1 */ + 0x007f400c /* EMC_DLL_XFORM_DQS2 */ + 0x007fc007 /* EMC_DLL_XFORM_DQS3 */ + 0x007f4006 /* EMC_DLL_XFORM_DQS4 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS5 */ + 0x007f8005 /* EMC_DLL_XFORM_DQS6 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS7 */ + 0x007fc007 /* EMC_DLL_XFORM_DQS8 */ + 0x007fc008 /* EMC_DLL_XFORM_DQS9 */ + 0x007f400c /* EMC_DLL_XFORM_DQS10 */ + 0x007fc007 /* EMC_DLL_XFORM_DQS11 */ + 0x007f4006 /* EMC_DLL_XFORM_DQS12 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS13 */ + 0x007f8005 /* EMC_DLL_XFORM_DQS14 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x61861820 /* EMC_XM2DQSPADCTRL3 */ + 0x00492492 /* EMC_XM2DQSPADCTRL4 */ + 0x00492492 /* EMC_XM2DQSPADCTRL5 */ + 0x61861800 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x006f000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000007 /* EMC_CTT */ + 0x00000004 /* EMC_CTT_DURATION */ + 0x00004080 /* EMC_CFG_PIPE */ + 0x80003012 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000f /* EMC_QPOP */ + >; + }; + }; + + emc-timings-6 { + nvidia,ram-code = <6>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000003 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000005 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x0000009a /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000006 /* EMC_TXSR */ + 0x00000006 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000a0 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x0000000b /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000023a /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x0000000a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000134 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000c /* EMC_TXSR */ + 0x0000000c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000013f /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000015 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000370 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 /* EMC_RC */ + 0x00000011 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000002 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000202 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000013 /* EMC_TXSR */ + 0x00000013 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000213 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000022 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000050e /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000304 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000018 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000033 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000004 /* EMC_EINPUT */ + 0x00000006 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000003 /* EMC_QRST */ + 0x0000000d /* EMC_QSAFE */ + 0x0000000f /* EMC_RDV */ + 0x00000011 /* EMC_RDV_MASK */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000032 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00090000 /* EMC_DLL_XFORM_DQ0 */ + 0x00090000 /* EMC_DLL_XFORM_DQ1 */ + 0x00094000 /* EMC_DLL_XFORM_DQ2 */ + 0x00094000 /* EMC_DLL_XFORM_DQ3 */ + 0x00009400 /* EMC_DLL_XFORM_DQ4 */ + 0x00009000 /* EMC_DLL_XFORM_DQ5 */ + 0x00009000 /* EMC_DLL_XFORM_DQ6 */ + 0x00009000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000066 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000d2b3 /* EMC_CFG_PIPE */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0174000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d /* EMC_RC */ + 0x0000004c /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000009 /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000007 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x0000000e /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x000008e4 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000004a /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x00000051 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000924 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00060000 /* EMC_DLL_XFORM_DQ0 */ + 0x00060000 /* EMC_DLL_XFORM_DQ1 */ + 0x00060000 /* EMC_DLL_XFORM_DQ2 */ + 0x00060000 /* EMC_DLL_XFORM_DQ3 */ + 0x00006000 /* EMC_DLL_XFORM_DQ4 */ + 0x00006000 /* EMC_DLL_XFORM_DQ5 */ + 0x00006000 /* EMC_DLL_XFORM_DQ6 */ + 0x00006000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000096 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0174000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000012 /* EMC_RC */ + 0x00000065 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000001 /* EMC_EINPUT */ + 0x00000008 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000000 /* EMC_QRST */ + 0x0000000f /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x00000bd1 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000063 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006b /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x0000000d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c11 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x00004800 /* EMC_DLL_XFORM_DQ4 */ + 0x00004800 /* EMC_DLL_XFORM_DQ5 */ + 0x00004800 /* EMC_DLL_XFORM_DQ6 */ + 0x00004800 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x000000c6 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x015b000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x8000188b /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x013a000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 /* EMC_RC */ + 0x00000088 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000011 /* EMC_RAS */ + 0x00000006 /* EMC_RP */ + 0x00000006 /* EMC_R2W */ + 0x00000009 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000d /* EMC_W2P */ + 0x00000006 /* EMC_RD_RCD */ + 0x00000006 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000007 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000009 /* EMC_EINPUT_DURATION */ + 0x00040000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000010 /* EMC_QSAFE */ + 0x00000013 /* EMC_RDV */ + 0x00000015 /* EMC_RDV_MASK */ + 0x00000fd6 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000b /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000084 /* EMC_AR2PDEN */ + 0x00000012 /* EMC_RW2PDEN */ + 0x0000008f /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000013 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001017 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe01200b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x013a000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000042a0 /* EMC_CFG_PIPE */ + 0x80002062 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000b /* EMC_QPOP */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0128000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001c /* EMC_RC */ + 0x0000009a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000013 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000007 /* EMC_R2W */ + 0x0000000b /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000010 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x0000000a /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000003 /* EMC_EINPUT */ + 0x0000000b /* EMC_EINPUT_DURATION */ + 0x00070000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000002 /* EMC_QRST */ + 0x00000012 /* EMC_QSAFE */ + 0x00000016 /* EMC_RDV */ + 0x00000018 /* EMC_RDV_MASK */ + 0x00001208 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000d /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000096 /* EMC_AR2PDEN */ + 0x00000015 /* EMC_RW2PDEN */ + 0x000000a2 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001249 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe00e00b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0128000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000040a0 /* EMC_CFG_PIPE */ + 0x800024aa /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000e /* EMC_QPOP */ >; }; + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0080089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200418>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f8000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000025 /* EMC_RC */ + 0x000000cc /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000008 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000004 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x0000000b /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x0000000d /* EMC_EINPUT_DURATION */ + 0x00080000 /* EMC_PUTERM_EXTRA */ + 0x00000004 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000014 /* EMC_QSAFE */ + 0x00000018 /* EMC_RDV */ + 0x0000001a /* EMC_RDV_MASK */ + 0x000017e2 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000011 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000c6 /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d6 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000006 /* EMC_TCKESR */ + 0x00000005 /* EMC_TPD */ + 0x0000001d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000008 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001822 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x80000005 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab198 /* EMC_FBIO_CFG5 */ + 0xe00700b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000009 /* EMC_DLL_XFORM_DQS0 */ + 0x00000009 /* EMC_DLL_XFORM_DQS1 */ + 0x00000009 /* EMC_DLL_XFORM_DQS2 */ + 0x00000007 /* EMC_DLL_XFORM_DQS3 */ + 0x00000006 /* EMC_DLL_XFORM_DQS4 */ + 0x00000006 /* EMC_DLL_XFORM_DQS5 */ + 0x007fc009 /* EMC_DLL_XFORM_DQS6 */ + 0x00000006 /* EMC_DLL_XFORM_DQS7 */ + 0x00000009 /* EMC_DLL_XFORM_DQS8 */ + 0x00000009 /* EMC_DLL_XFORM_DQS9 */ + 0x00000009 /* EMC_DLL_XFORM_DQS10 */ + 0x00000007 /* EMC_DLL_XFORM_DQS11 */ + 0x00000006 /* EMC_DLL_XFORM_DQS12 */ + 0x00000007 /* EMC_DLL_XFORM_DQS13 */ + 0x00000009 /* EMC_DLL_XFORM_DQS14 */ + 0x00000007 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR0 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR3 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x61861820 /* EMC_XM2DQSPADCTRL3 */ + 0x004d34d3 /* EMC_XM2DQSPADCTRL4 */ + 0x004d34d3 /* EMC_XM2DQSPADCTRL5 */ + 0x61861800 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f8000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000007 /* EMC_CTT */ + 0x00000004 /* EMC_CTT_DURATION */ + 0x00004080 /* EMC_CFG_PIPE */ + 0x80003012 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000f /* EMC_QPOP */ + >; + }; }; }; @@ -1759,30 +5781,609 @@ emc-timings-1 { nvidia,ram-code = <1>; + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 /* MC_EMEM_ARB_CFG */ + 0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x76230303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 /* MC_EMEM_ARB_CFG */ + 0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74a30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74230403 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 /* MC_EMEM_ARB_CFG */ + 0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0403 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0405 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000005 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0607 /* MC_EMEM_ARB_DA_COVERS */ + 0x77450e08 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7586120a /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000d /* MC_EMEM_ARB_TIMING_RC */ + 0x00000008 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x0010090d /* MC_EMEM_ARB_DA_COVERS */ + 0x7428180e /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000e /* MC_EMEM_ARB_TIMING_RC */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000b /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000007 /* MC_EMEM_ARB_TIMING_W2R */ + 0x07050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b0e /* MC_EMEM_ARB_DA_COVERS */ + 0x73a91b0f /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08060202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x734c2414 /* MC_EMEM_ARB_MISC0 */ + 0x70000f02 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + + emc-timings-4 { + nvidia,ram-code = <4>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 /* MC_EMEM_ARB_CFG */ + 0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x77430303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 /* MC_EMEM_ARB_CFG */ + 0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75430403 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 /* MC_EMEM_ARB_CFG */ + 0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x74e30504 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0504 /* MC_EMEM_ARB_DA_COVERS */ + 0x74a40a05 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000005 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0607 /* MC_EMEM_ARB_DA_COVERS */ + 0x77450e08 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7586120a /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RC */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x0010090c /* MC_EMEM_ARB_DA_COVERS */ + 0x7488180d /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000e /* MC_EMEM_ARB_TIMING_RC */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000b /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000007 /* MC_EMEM_ARB_TIMING_W2R */ + 0x07050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b0e /* MC_EMEM_ARB_DA_COVERS */ + 0x74691b0f /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08060202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00170e13 /* MC_EMEM_ARB_DA_COVERS */ + 0x746c2414 /* MC_EMEM_ARB_MISC0 */ + 0x70000f02 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + + emc-timings-6 { + nvidia,ram-code = <6>; timing-12750000 { clock-frequency = <12750000>; nvidia,emem-configuration = < - 0x40040001 - 0x8000000a - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x77e30303 - 0x70000f03 - 0x001f0000 + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1790,25 +6391,25 @@ clock-frequency = <20400000>; nvidia,emem-configuration = < - 0x40020001 - 0x80000012 - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x76230303 - 0x70000f03 - 0x001f0000 + 0x40020001 /* MC_EMEM_ARB_CFG */ + 0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x76230303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1816,25 +6417,25 @@ clock-frequency = <40800000>; nvidia,emem-configuration = < - 0xa0000001 - 0x80000017 - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x74a30303 - 0x70000f03 - 0x001f0000 + 0xa0000001 /* MC_EMEM_ARB_CFG */ + 0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74a30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1842,25 +6443,25 @@ clock-frequency = <68000000>; nvidia,emem-configuration = < - 0x00000001 - 0x8000001e - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x74230403 - 0x70000f03 - 0x001f0000 + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74230403 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1868,25 +6469,25 @@ clock-frequency = <102000000>; nvidia,emem-configuration = < - 0x08000001 - 0x80000026 - 0x00000001 - 0x00000001 - 0x00000003 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0403 - 0x73c30504 - 0x70000f03 - 0x001f0000 + 0x08000001 /* MC_EMEM_ARB_CFG */ + 0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0403 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1894,25 +6495,25 @@ clock-frequency = <204000000>; nvidia,emem-configuration = < - 0x01000003 - 0x80000040 - 0x00000001 - 0x00000001 - 0x00000005 - 0x00000002 - 0x00000004 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000004 - 0x00000006 - 0x06040203 - 0x000a0405 - 0x73840a06 - 0x70000f03 - 0x001f0000 + 0x01000003 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0405 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1920,25 +6521,25 @@ clock-frequency = <300000000>; nvidia,emem-configuration = < - 0x08000004 - 0x80000040 - 0x00000001 - 0x00000002 - 0x00000007 - 0x00000004 - 0x00000005 - 0x00000001 - 0x00000002 - 0x00000007 - 0x00000002 - 0x00000002 - 0x00000004 - 0x00000006 - 0x06040202 - 0x000b0607 - 0x77450e08 - 0x70000f03 - 0x001f0000 + 0x08000004 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000005 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0607 /* MC_EMEM_ARB_DA_COVERS */ + 0x77450e08 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1946,25 +6547,51 @@ clock-frequency = <396000000>; nvidia,emem-configuration = < - 0x0f000005 - 0x80000040 - 0x00000001 - 0x00000002 - 0x00000009 - 0x00000005 - 0x00000007 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000002 - 0x00000002 - 0x00000004 - 0x00000006 - 0x06040202 - 0x000d0709 - 0x7586120a - 0x70000f03 - 0x001f0000 + 0x0f000005 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7586120a /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000d /* MC_EMEM_ARB_TIMING_RC */ + 0x00000008 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x0010090d /* MC_EMEM_ARB_DA_COVERS */ + 0x7428180e /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1972,25 +6599,25 @@ clock-frequency = <600000000>; nvidia,emem-configuration = < - 0x00000009 - 0x80000040 - 0x00000003 - 0x00000004 - 0x0000000e - 0x00000009 - 0x0000000b - 0x00000001 - 0x00000003 - 0x0000000b - 0x00000002 - 0x00000002 - 0x00000005 - 0x00000007 - 0x07050202 - 0x00130b0e - 0x73a91b0f - 0x70000f03 - 0x001f0000 + 0x00000009 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000e /* MC_EMEM_ARB_TIMING_RC */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000b /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000007 /* MC_EMEM_ARB_TIMING_W2R */ + 0x07050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b0e /* MC_EMEM_ARB_DA_COVERS */ + 0x73a91b0f /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1998,25 +6625,25 @@ clock-frequency = <792000000>; nvidia,emem-configuration = < - 0x0e00000b - 0x80000040 - 0x00000004 - 0x00000005 - 0x00000013 - 0x0000000c - 0x0000000f - 0x00000002 - 0x00000003 - 0x0000000c - 0x00000002 - 0x00000002 - 0x00000006 - 0x00000008 - 0x08060202 - 0x00160d13 - 0x734c2414 - 0x70000f02 - 0x001f0000 + 0x0e00000b /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08060202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x734c2414 /* MC_EMEM_ARB_MISC0 */ + 0x70000f02 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 5d5e6e18bc7b..7309393bfced 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -38,6 +38,9 @@ sor@54540000 { status = "okay"; + avdd-io-hdmi-dp-supply = <&vdd_1v05_run>; + vdd-hdmi-dp-pll-supply = <&vdd_3v3_run>; + nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index b113e47b2b2a..413bfb981de8 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -157,10 +157,11 @@ reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_SOR0>, + <&tegra_car TEGRA124_CLK_SOR0_OUT>, <&tegra_car TEGRA124_CLK_PLL_D_OUT0>, <&tegra_car TEGRA124_CLK_PLL_DP>, <&tegra_car TEGRA124_CLK_CLK_M>; - clock-names = "sor", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 182>; reset-names = "sor"; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi new file mode 100644 index 000000000000..e85ffdbef876 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + opp@216000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@216000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@312000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@312000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@456000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_800_2_2 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_800_3_2 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_825 { + opp-microvolt = <825000 825000 1125000>; + }; + + opp@608000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@608000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@608000000_800_3_2 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@608000000_825 { + opp-microvolt = <825000 825000 1125000>; + }; + + opp@608000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@608000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@760000000_775 { + opp-microvolt = <775000 775000 1125000>; + }; + + opp@760000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@760000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@760000000_875 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_875_1_1 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_875_0_2 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_875_1_2 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@760000000_975 { + opp-microvolt = <975000 975000 1125000>; + }; + + opp@816000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@816000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@816000000_875 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@816000000_950 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@816000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@912000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@912000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@912000000_925 { + opp-microvolt = <925000 925000 1125000>; + }; + + opp@912000000_950 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@912000000_950_0_2 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@912000000_950_2_2 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@912000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@912000000_1050 { + opp-microvolt = <1050000 1050000 1125000>; + }; + + opp@1000000000_875 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@1000000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@1000000000_950 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@1000000000_975 { + opp-microvolt = <975000 975000 1125000>; + }; + + opp@1000000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@1000000000_1000_0_2 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@1000000000_1025 { + opp-microvolt = <1025000 1025000 1125000>; + }; + + opp@1000000000_1100 { + opp-microvolt = <1100000 1100000 1125000>; + }; + + opp@1200000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@1200000000_1050 { + opp-microvolt = <1050000 1050000 1125000>; + }; + + opp@1200000000_1100 { + opp-microvolt = <1100000 1100000 1125000>; + }; + + opp@1200000000_1125 { + opp-microvolt = <1125000 1125000 1125000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi new file mode 100644 index 000000000000..c878f4231791 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@216000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0003>; + opp-hz = /bits/ 64 <216000000>; + }; + + opp@216000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0004>; + opp-hz = /bits/ 64 <216000000>; + }; + + opp@312000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0003>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@312000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0004>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@456000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0C 0x0003>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0006>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_800_2_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_800_3_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_825 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@608000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0003>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0006>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_800_3_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_825 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0006>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@760000000_775 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0003>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0006>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875_1_1 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875_0_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875_1_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_975 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@816000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0007>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_875 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0005>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_950 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0006>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@912000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0007>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_925 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_950 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0006>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_950_0_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_950_2_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_1050 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@1000000000_875 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0007>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_950 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0006>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1000_0_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1025 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1100 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1200000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1050 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1100 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1125 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 8861e0976e37..85fce5bc72d6 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -3,6 +3,8 @@ #include <dt-bindings/input/input.h> #include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" +#include "tegra20-cpu-opp-microvolt.dtsi" / { model = "Toshiba AC100 / Dynabook AZ"; @@ -337,18 +339,26 @@ regulator-always-on; }; - sm0 { + core_vdd_reg: sm0 { regulator-name = "+1.2vs_sm0,vdd_core"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 450000>; regulator-always-on; + + nvidia,tegra-core-regulator; }; - sm1 { + cpu_vdd_reg: sm1 { regulator-name = "+1.0vs_sm1,vdd_cpu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1100000>; + regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>; + regulator-coupled-max-spread = <450000 450000>; regulator-always-on; + + nvidia,tegra-cpu-regulator; }; sm2_reg: sm2 { @@ -367,10 +377,15 @@ regulator-always-on; }; - ldo2 { + rtc_vdd_reg: ldo2 { regulator-name = "+1.2vs_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 450000>; + regulator-always-on; + + nvidia,tegra-rtc-regulator; }; ldo3 { @@ -603,4 +618,16 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&cpu_vdd_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + cpu-supply = <&cpu_vdd_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 3e5ac096d85e..8debd3d3c20d 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -3,6 +3,7 @@ #include <dt-bindings/input/input.h> #include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" / { model = "Compulab TrimSlice board"; @@ -471,4 +472,14 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + cpus { + cpu0: cpu@0 { + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 8c942e60703e..9c58e7fcf5c0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -851,12 +851,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; }; }; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 02f8126481a2..8b7a827d604d 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -994,11 +994,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -1008,17 +1014,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 7f112f192fe9..c18f6f61d764 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -976,11 +976,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -990,17 +996,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 4dbd4af679f0..9234988624ec 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "tegra30-cardhu.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" /* This dts file support the cardhu A04 and later versions of board */ @@ -103,4 +105,50 @@ gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; }; + + i2c@7000d000 { + pmic: tps65911@2d { + regulators { + vddctrl_reg: vddctrl { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&vddcore_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + + nvidia,tegra-cpu-regulator; + }; + }; + }; + + vddcore_reg: tps62361@60 { + regulator-coupled-with = <&vddctrl_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + + nvidia,tegra-core-regulator; + }; + }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@2 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@3 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 35af03ca9e90..1f9198bb24ff 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -845,11 +845,18 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* forbid to use ADC channels 3-0 (touch) */ stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -859,17 +866,16 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi new file mode 100644 index 000000000000..5c40ef49894f --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi @@ -0,0 +1,801 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + opp@51000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@51000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@51000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@102000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@102000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@102000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@204000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@204000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@204000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@312000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@312000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@340000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@340000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@370000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@456000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@456000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@475000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@475000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@608000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@608000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@620000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_4_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_4_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_2 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_3 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_4_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_4_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_0_10 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@760000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@816000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@816000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@860000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@860000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_4_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_4_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@910000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@1000000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@1000000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_4_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_4_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1000000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1100000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@1100000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_4_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_4_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_1 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_2 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_3 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_4 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1100000000_1075 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1150000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1200000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1200000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_1 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_2 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_3 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_4 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_4_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_4_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_1 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_2 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_3 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_4 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_7 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_8 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1050 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1200000000_1075 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1200000000_1100 { + opp-microvolt = <1100000 1100000 1250000>; + }; + + opp@1300000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1300000000_1000_4_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1300000000_1000_4_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1300000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1025_3_1 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1025_3_7 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1025_3_8 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1050 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_2_1 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_2 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_3 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_4 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_5 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_6 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_2_7 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_2_8 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_12 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_13 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1075 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1075_2_2 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1075_2_3 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1075_2_4 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1100 { + opp-microvolt = <1100000 1100000 1250000>; + }; + + opp@1300000000_1125 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1300000000_1150 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1300000000_1175 { + opp-microvolt = <1175000 1175000 1250000>; + }; + + opp@1400000000_1100 { + opp-microvolt = <1100000 1100000 1250000>; + }; + + opp@1400000000_1125 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1400000000_1150 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1400000000_1150_2_4 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1400000000_1175 { + opp-microvolt = <1175000 1175000 1250000>; + }; + + opp@1400000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + + opp@1500000000_1125 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_5 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_6 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_12 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_13 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1150 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_5 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_6 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_12 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_13 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1200 { + opp-microvolt = <1200000 1200000 1250000>; + }; + + opp@1500000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + + opp@1600000000_1212 { + opp-microvolt = <1212000 1212000 1250000>; + }; + + opp@1600000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + + opp@1700000000_1212 { + opp-microvolt = <1212000 1212000 1250000>; + }; + + opp@1700000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi new file mode 100644 index 000000000000..d64fc262585e --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi @@ -0,0 +1,1202 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@51000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x31FE>; + opp-hz = /bits/ 64 <51000000>; + }; + + opp@51000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C01>; + opp-hz = /bits/ 64 <51000000>; + }; + + opp@51000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <51000000>; + }; + + opp@102000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x31FE>; + opp-hz = /bits/ 64 <102000000>; + }; + + opp@102000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C01>; + opp-hz = /bits/ 64 <102000000>; + }; + + opp@102000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <102000000>; + }; + + opp@204000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x31FE>; + opp-hz = /bits/ 64 <204000000>; + }; + + opp@204000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C01>; + opp-hz = /bits/ 64 <204000000>; + }; + + opp@204000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <204000000>; + }; + + opp@312000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C00>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@312000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@340000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0192>; + opp-hz = /bits/ 64 <340000000>; + }; + + opp@340000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0F 0x0001>; + opp-hz = /bits/ 64 <340000000>; + }; + + opp@370000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x306C>; + opp-hz = /bits/ 64 <370000000>; + }; + + opp@456000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C00>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@475000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x31FE>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0F 0x0001>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0080>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0100>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@608000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0400>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@620000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x306C>; + opp-hz = /bits/ 64 <620000000>; + }; + + opp@640000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0F 0x0001>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@760000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x3461>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_0_10 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0400>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0008>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@816000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0400>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@860000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0C 0x0001>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0001>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0008>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@910000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x18 0x3060>; + opp-hz = /bits/ 64 <910000000>; + }; + + opp@1000000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0C 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x019E>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1100000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0001>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x06 0x0001>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x019E>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1075 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1150000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x18 0x3060>; + opp-hz = /bits/ 64 <1150000000>; + }; + + opp@1200000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1050 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x019E>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1075 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1100 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1300000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0001>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1000_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1000_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x12 0x3061>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_5 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0020>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_6 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0040>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_12 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x1000>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_13 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x2000>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0182>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1100 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x001C>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1125 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1150 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0182>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1175 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1400000000_1100 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x18 0x307C>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1125 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x000C>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1150 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x000C>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1150_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1175 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1500000000_1125 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_5 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0020>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_6 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0040>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_12 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x1000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_13 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x2000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_5 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0020>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_6 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0040>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_12 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x1000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_13 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x2000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1200 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1600000000_1212 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x3060>; + opp-hz = /bits/ 64 <1600000000>; + }; + + opp@1600000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x3060>; + opp-hz = /bits/ 64 <1600000000>; + }; + + opp@1700000000_1212 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x3060>; + opp-hz = /bits/ 64 <1700000000>; + }; + + opp@1700000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x3060>; + opp-hz = /bits/ 64 <1700000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index e074258d4518..55ae050042ce 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -422,6 +422,7 @@ clocks = <&tegra_car TEGRA30_CLK_VDE>; reset-names = "vde", "mc"; resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>; + iommus = <&mc TEGRA_SWGROUP_VDE>; }; apbmisc@70000800 { @@ -732,6 +733,15 @@ #reset-cells = <1>; }; + memory-controller@7000f400 { + compatible = "nvidia,tegra30-emc"; + reg = <0x7000f400 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_EMC>; + + nvidia,memory-controller = <&mc>; + }; + fuse@7000f800 { compatible = "nvidia,tegra30-efuse"; reg = <0x7000f800 0x400>; @@ -997,24 +1007,28 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; }; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index b6a1eeeb2bb4..fba37b8756f7 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -129,8 +129,11 @@ &i2c0 { clock-frequency = <400000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &nfc { @@ -308,6 +311,13 @@ >; }; + pinctrl_i2c0_gpio: i2c0gpiogrp { + fsl,pins = < + VF610_PAD_PTB14__GPIO_36 0x37ff + VF610_PAD_PTB15__GPIO_37 0x37ff + >; + }; + pinctrl_nfc: nfcgrp { fsl,pins = < VF610_PAD_PTD23__NF_IO7 0x28df diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 237b0246fa84..92255f8893ce 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -44,7 +44,7 @@ / { model = "Toradex Colibri VF50 COM"; - compatible = "toradex,vf610-colibri_vf50", "fsl,vf500"; + compatible = "toradex,vf500-colibri_vf50", "fsl,vf500"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index 0f3870d3b099..830c85476b3d 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -259,24 +259,28 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + /delete-property/dma-names; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + /delete-property/dma-names; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + /delete-property/dma-names; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; + /delete-property/dma-names; status = "okay"; }; diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index c8ebb23c4e02..d7caf618f980 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -183,11 +183,6 @@ #address-cells = <1>; #size-cells = <0>; - port@1 { - reg = <1>; - label = "internal_j9"; - }; - port@2 { reg = <2>; label = "eth_fc_1000_2"; @@ -271,11 +266,6 @@ #address-cells = <1>; #size-cells = <0>; - port@1 { - reg = <1>; - label = "internal_j8"; - }; - port@2 { reg = <2>; label = "eth_fc_1000_8"; @@ -689,7 +679,6 @@ linux,rs485-enabled-at-boot-time; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - rs485-rts-delay = <0 200>; status = "okay"; }; @@ -697,7 +686,6 @@ linux,rs485-enabled-at-boot-time; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - rs485-rts-delay = <0 200>; status = "okay"; }; diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index 1857df992484..303f75a3baec 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -132,10 +132,12 @@ CONFIG_ASPEED_BT_IPMI_BMC=y CONFIG_HW_RANDOM_TIMERIOMEM=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_ASPEED=y CONFIG_I2C_FSI=y +CONFIG_SPI=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y @@ -185,6 +187,12 @@ CONFIG_USB_CONFIGFS_F_LB_SS=y CONFIG_USB_CONFIGFS_F_FS=y CONFIG_USB_CONFIGFS_F_HID=y CONFIG_USB_CONFIGFS_F_PRINTER=y +CONFIG_MMC=y +# CONFIG_PWRSEQ_EMMC is not set +# CONFIG_PWRSEQ_SIMPLE is not set +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ASPEED=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y @@ -216,7 +224,6 @@ CONFIG_FSI_MASTER_GPIO=y CONFIG_FSI_MASTER_HUB=y CONFIG_FSI_MASTER_AST_CF=y CONFIG_FSI_SCOM=y -CONFIG_FSI_SBEFIFO=y CONFIG_FANOTIFY=y CONFIG_OVERLAY_FS=y CONFIG_TMPFS=y @@ -231,7 +238,6 @@ CONFIG_SQUASHFS_ZSTD=y # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_HARDENED_USERCOPY=y CONFIG_FORTIFY_SOURCE=y -# CONFIG_CRYPTO_ECHAINIV is not set CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_USER_API_HASH=y @@ -247,14 +253,14 @@ CONFIG_DEBUG_INFO_REDUCED=y CONFIG_DEBUG_INFO_DWARF4=y CONFIG_GDB_SCRIPTS=y CONFIG_STRIP_ASM_SYMS=y +CONFIG_SCHED_STACK_END_CHECK=y +CONFIG_PANIC_ON_OOPS=y +CONFIG_PANIC_TIMEOUT=-1 CONFIG_SOFTLOCKUP_DETECTOR=y # CONFIG_DETECT_HUNG_TASK is not set CONFIG_WQ_WATCHDOG=y -CONFIG_PANIC_ON_OOPS=y -CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set -CONFIG_SCHED_STACK_END_CHECK=y CONFIG_FUNCTION_TRACER=y -# CONFIG_RUNTIME_TESTING_MENU is not set CONFIG_DEBUG_WX=y CONFIG_DEBUG_USER=y +# CONFIG_RUNTIME_TESTING_MENU is not set diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 597536cc9573..b0d056d49abe 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -139,6 +139,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_ASPEED_VUART=y CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_ASPEED_KCS_IPMI_BMC=y CONFIG_ASPEED_BT_IPMI_BMC=y @@ -154,6 +155,7 @@ CONFIG_SPI=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y +CONFIG_GPIO_ASPEED_SGPIO=y CONFIG_W1=y CONFIG_W1_MASTER_GPIO=y CONFIG_W1_SLAVE_THERM=y @@ -236,8 +238,10 @@ CONFIG_FSI=y CONFIG_FSI_MASTER_GPIO=y CONFIG_FSI_MASTER_HUB=y CONFIG_FSI_MASTER_AST_CF=y +CONFIG_FSI_MASTER_ASPEED=y CONFIG_FSI_SCOM=y CONFIG_FSI_SBEFIFO=y +CONFIG_FSI_OCC=y CONFIG_FANOTIFY=y CONFIG_OVERLAY_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 309c55a8d107..3729a6e0ee24 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -18,6 +18,7 @@ CONFIG_ARCH_MULTI_V5=y CONFIG_ARCH_AT91=y CONFIG_SOC_AT91RM9200=y CONFIG_SOC_AT91SAM9=y +# CONFIG_ATMEL_CLOCKSOURCE_PIT is not set CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig index 31bfe1647d28..f53634af014b 100644 --- a/arch/arm/configs/axm55xx_defconfig +++ b/arch/arm/configs/axm55xx_defconfig @@ -20,7 +20,6 @@ CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 08db1c83eb2d..e7e4bb5ad8d5 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -230,6 +230,7 @@ CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y CONFIG_SND_SOC_SMDK_WM8994_PCM=y CONFIG_SND_SOC_SNOW=y CONFIG_SND_SOC_ODROID=y +CONFIG_SND_SOC_ARNDALE=y CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -294,6 +295,7 @@ CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y +CONFIG_EXYNOS5422_DMC=y CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y CONFIG_EXTCON=y CONFIG_EXTCON_MAX14577=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 0f7381ee0c37..26d6dee67aa6 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -179,6 +179,7 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_TOUCHSCREEN_DA9052=y CONFIG_TOUCHSCREEN_EGALAX=y CONFIG_TOUCHSCREEN_GOODIX=y CONFIG_TOUCHSCREEN_MAX11801=y @@ -236,6 +237,7 @@ CONFIG_DA9062_WATCHDOG=y CONFIG_DA9063_WATCHDOG=m CONFIG_RN5T618_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_IMX7ULP_WDT=y CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_DA9062=y CONFIG_MFD_DA9063=y @@ -335,7 +337,7 @@ CONFIG_NOP_USB_XCEIV=y CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_FSL_USB2=y -CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS=y CONFIG_USB_CONFIGFS_SERIAL=y CONFIG_USB_CONFIGFS_ACM=y CONFIG_USB_CONFIGFS_OBEX=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 3d5f5b501330..11e2211f9007 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -11,7 +11,6 @@ CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_SCHED=y CONFIG_BLK_CGROUP=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set @@ -135,6 +134,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_TI_KEYSTONE_NETCP=y CONFIG_TI_KEYSTONE_NETCP_ETHSS=y +CONFIG_TI_CPTS=y CONFIG_MARVELL_PHY=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 09deb57db942..989bcc84e7fb 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -9,7 +9,6 @@ CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y # CONFIG_ARCH_MULTI_V7 is not set diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig index 9b98761e51c9..45d27190c9c9 100644 --- a/arch/arm/configs/moxart_defconfig +++ b/arch/arm/configs/moxart_defconfig @@ -4,7 +4,6 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_SYSCTL_SYSCALL=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set # CONFIG_SIGNALFD is not set diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index bd018873e47a..56315e1f81ff 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -165,6 +165,7 @@ CONFIG_SPI_ATMEL=y CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y CONFIG_GPIO_ASPEED=m +CONFIG_GPIO_ASPEED_SGPIO=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y @@ -241,6 +242,9 @@ CONFIG_USB_ASPEED_VHUB=m CONFIG_USB_CONFIGFS=m CONFIG_MMC=y CONFIG_SDIO_UART=y +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PLTFM=m +CONFIG_MMC_SDHCI_OF_ASPEED=m CONFIG_MMC_ATMELMCI=y CONFIG_MMC_MVSDIO=y CONFIG_NEW_LEDS=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e4c8def9a0a5..24962d0e71c7 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -53,6 +53,9 @@ CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MESON=y CONFIG_ARCH_MILBEAUT=y CONFIG_ARCH_MILBEAUT_M10V=y +CONFIG_ARCH_MMP=y +CONFIG_MACH_MMP2_DT=y +CONFIG_MACH_MMP3_DT=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -168,6 +171,14 @@ CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y +CONFIG_NFC=m +CONFIG_NFC_DIGITAL=m +CONFIG_NFC_NCI=m +CONFIG_NFC_NCI_SPI=m +CONFIG_NFC_NCI_UART=m +CONFIG_NFC_HCI=m +CONFIG_NFC_SHDLC=y +CONFIG_NFC_S3FWRN5_I2C=m CONFIG_PCIEPORTBUS=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y @@ -244,6 +255,7 @@ CONFIG_BGMAC_BCMA=y CONFIG_SYSTEMPORT=m CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_FTGMAC100=m CONFIG_GIANFAR=y CONFIG_HIX5HD2_GMAC=y CONFIG_E1000E=y @@ -283,6 +295,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y +CONFIG_KEYBOARD_PXA27x=m CONFIG_KEYBOARD_SAMSUNG=m CONFIG_KEYBOARD_ST_KEYSCAN=y CONFIG_KEYBOARD_SPEAR=y @@ -437,6 +450,7 @@ CONFIG_PINCTRL_MSM8X74=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y +CONFIG_GPIO_ASPEED_SGPIO=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_EM=y @@ -491,12 +505,12 @@ CONFIG_BCM2835_THERMAL=m CONFIG_BRCMSTB_THERMAL=m CONFIG_ST_THERMAL_MEMMAP=y CONFIG_UNIPHIER_THERMAL=y -CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=m CONFIG_XILINX_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SAMA5D4_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=m CONFIG_DW_WATCHDOG=y CONFIG_DAVINCI_WATCHDOG=m CONFIG_ORION_WATCHDOG=y @@ -581,6 +595,7 @@ CONFIG_REGULATOR_QCOM_RPM=y CONFIG_REGULATOR_QCOM_SMD_RPM=m CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_RN5T618=y +CONFIG_REGULATOR_S2MPA01=m CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_STM32_BOOSTER=m @@ -605,6 +620,7 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_MMP_CAMERA=m CONFIG_VIDEO_ASPEED=m CONFIG_VIDEO_STM32_DCMI=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m @@ -702,6 +718,9 @@ CONFIG_SND_ATMEL_SOC_PDMIC=m CONFIG_SND_ATMEL_SOC_I2S=m CONFIG_SND_BCM2835_SOC_I2S=m CONFIG_SND_SOC_FSL_SAI=m +CONFIG_SND_MMP_SOC=y +CONFIG_SND_PXA_SOC_SSP=m +CONFIG_SND_PXA910_SOC=m CONFIG_SND_SOC_ROCKCHIP=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_MAX98090=m @@ -711,9 +730,12 @@ CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m CONFIG_SND_SOC_SMDK_WM8994_PCM=m CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_ODROID=m +CONFIG_SND_SOC_ARNDALE=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_STI=m +CONFIG_SND_SOC_STM32_SAI=m +CONFIG_SND_SOC_STM32_I2S=m CONFIG_SND_SUN4I_CODEC=m CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA20_I2S=m @@ -727,10 +749,12 @@ CONFIG_SND_SOC_TEGRA_ALC5632=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_CPCAP=m +CONFIG_SND_SOC_CS42L51_I2C=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SPDIF=m CONFIG_SND_SOC_STI_SAS=m CONFIG_SND_SOC_WM8978=m +CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y @@ -740,6 +764,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_STI=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_MV=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y CONFIG_USB_OHCI_EXYNOS=m @@ -810,6 +835,7 @@ CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_PXAV3=y +CONFIG_MMC_SDHCI_PXAV2=m CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y @@ -875,6 +901,7 @@ CONFIG_RTC_DRV_DA9063=m CONFIG_RTC_DRV_EFI=m CONFIG_RTC_DRV_DIGICOLOR=m CONFIG_RTC_DRV_S3C=m +CONFIG_RTC_DRV_SA1100=m CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_AT91RM9200=m CONFIG_RTC_DRV_AT91SAM9=m @@ -933,6 +960,7 @@ CONFIG_BCM2835_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_EXYNOS_IOMMU=y CONFIG_REMOTEPROC=y CONFIG_ST_REMOTEPROC=m CONFIG_RPMSG_VIRTIO=m @@ -967,8 +995,14 @@ CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y +CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m CONFIG_ARM_TEGRA_DEVFREQ=m +CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m +CONFIG_EXTCON_MAX14577=m +CONFIG_EXTCON_MAX77693=m +CONFIG_EXTCON_MAX8997=m CONFIG_TI_AEMIF=y +CONFIG_EXYNOS5422_DMC=m CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y CONFIG_ASPEED_ADC=m @@ -1020,12 +1054,14 @@ CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_HIX5HD2_SATA=y CONFIG_PHY_BERLIN_SATA=y CONFIG_PHY_BERLIN_USB=y +CONFIG_PHY_MMP3_USB=m CONFIG_PHY_CPCAP_USB=m CONFIG_PHY_QCOM_APQ8064_SATA=m CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_ROCKCHIP_DP=m CONFIG_PHY_ROCKCHIP_USB=y CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_PHY_EXYNOS5250_SATA=m CONFIG_PHY_UNIPHIER_USB2=y CONFIG_PHY_UNIPHIER_USB3=y CONFIG_PHY_MIPHY28LP=y @@ -1041,6 +1077,13 @@ CONFIG_ROCKCHIP_EFUSE=m CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y +CONFIG_FSI=m +CONFIG_FSI_MASTER_GPIO=m +CONFIG_FSI_MASTER_HUB=m +CONFIG_FSI_MASTER_ASPEED=m +CONFIG_FSI_SCOM=m +CONFIG_FSI_SBEFIFO=m +CONFIG_FSI_OCC=m CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 40d7f1a4fc45..8c37cc8ab6f2 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -128,7 +128,6 @@ CONFIG_PCI_ENDPOINT_CONFIGFS=y CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y CONFIG_OMAP_OCP2SCP=y CONFIG_CONNECTOR=m CONFIG_MTD=y @@ -343,18 +342,16 @@ CONFIG_VIDEO_OMAP3=m CONFIG_CEC_PLATFORM_DRIVERS=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_TVP5150=m +CONFIG_VIDEO_MT9P031=m CONFIG_DRM=m CONFIG_DRM_OMAP=m CONFIG_OMAP5_DSS_HDMI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_DRM_OMAP_ENCODER_OPA362=m -CONFIG_DRM_OMAP_ENCODER_TFP410=m CONFIG_DRM_OMAP_ENCODER_TPD12S015=m -CONFIG_DRM_OMAP_CONNECTOR_DVI=m CONFIG_DRM_OMAP_CONNECTOR_HDMI=m CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m -CONFIG_DRM_OMAP_PANEL_DPI=m CONFIG_DRM_OMAP_PANEL_DSI_CM=m CONFIG_DRM_TILCDC=m CONFIG_DRM_PANEL_SIMPLE=m @@ -539,11 +536,16 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_SECURITY=y CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_DEV_OMAP=m +CONFIG_CRYPTO_DEV_OMAP_SHAM=m +CONFIG_CRYPTO_DEV_OMAP_AES=m +CONFIG_CRYPTO_DEV_OMAP_DES=m CONFIG_CRC_CCITT=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y +CONFIG_DMA_CMA=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -554,3 +556,4 @@ CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_SCHEDSTATS=y # CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_TI_CPSW_SWITCHDEV=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 02f1e7b7c8f6..4dd1d8ca4455 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -5,7 +5,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_SLUB_DEBUG is not set @@ -226,6 +225,7 @@ CONFIG_QCOM_WCNSS_PIL=y CONFIG_RPMSG_CHAR=y CONFIG_RPMSG_QCOM_SMD=y CONFIG_QCOM_GSBI=y +CONFIG_QCOM_OCMEM=y CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index ef785340e6f8..27f6135c4ee7 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -20,6 +20,7 @@ CONFIG_ARCH_AT91=y CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y +# CONFIG_ATMEL_CLOCKSOURCE_PIT is not set CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index c6c70355141c..bda57cafa2bc 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -9,7 +9,6 @@ CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_ARCH_RENESAS=y CONFIG_PL310_ERRATA_588369=y -CONFIG_ARM_ERRATA_754322=y CONFIG_SMP=y CONFIG_SCHED_MC=y CONFIG_NR_CPUS=8 @@ -50,7 +49,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y @@ -130,7 +128,6 @@ CONFIG_DRM_SII902X=y CONFIG_DRM_I2C_ADV7511=y CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_FB_SH_MOBILE_LCDC=y -# CONFIG_LCD_CLASS_DEVICE is not set # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_AS3711=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index df433abfcb02..3f5d727efc41 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -56,6 +56,7 @@ CONFIG_SUN4I_EMAC=y CONFIG_STMMAC_ETH=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_MICREL_PHY=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_SUN4I_LRADC=y @@ -150,4 +151,6 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y +CONFIG_CRYPTO_DEV_ALLWINNER=y +CONFIG_CRYPTO_DEV_SUN8I_CE=y CONFIG_CRYPTO_DEV_SUN4I_SS=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 8f5c6a5b444c..a27592d3b1fa 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -250,6 +250,8 @@ CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y +CONFIG_STAGING_MEDIA=y +CONFIG_TEGRA_VDE=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_ARCH_TEGRA_2x_SOC=y diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig index c4070c19ea6c..4d2ef785ed34 100644 --- a/arch/arm/configs/zx_defconfig +++ b/arch/arm/configs/zx_defconfig @@ -11,7 +11,6 @@ CONFIG_RT_GROUP_SCHED=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index 043b0b18bf7e..2674de6ada1f 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -30,7 +30,7 @@ config CRYPTO_SHA1_ARM_NEON config CRYPTO_SHA1_ARM_CE tristate "SHA1 digest algorithm (ARM v8 Crypto Extensions)" - depends on KERNEL_MODE_NEON + depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800) select CRYPTO_SHA1_ARM select CRYPTO_HASH help @@ -39,7 +39,7 @@ config CRYPTO_SHA1_ARM_CE config CRYPTO_SHA2_ARM_CE tristate "SHA-224/256 digest algorithm (ARM v8 Crypto Extensions)" - depends on KERNEL_MODE_NEON + depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800) select CRYPTO_SHA256_ARM select CRYPTO_HASH help @@ -81,7 +81,7 @@ config CRYPTO_AES_ARM config CRYPTO_AES_ARM_BS tristate "Bit sliced AES using NEON instructions" depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER + select CRYPTO_SKCIPHER select CRYPTO_LIB_AES select CRYPTO_SIMD help @@ -96,8 +96,8 @@ config CRYPTO_AES_ARM_BS config CRYPTO_AES_ARM_CE tristate "Accelerated AES using ARMv8 Crypto Extensions" - depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER + depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800) + select CRYPTO_SKCIPHER select CRYPTO_LIB_AES select CRYPTO_SIMD help @@ -106,7 +106,7 @@ config CRYPTO_AES_ARM_CE config CRYPTO_GHASH_ARM_CE tristate "PMULL-accelerated GHASH using NEON/ARMv8 Crypto Extensions" - depends on KERNEL_MODE_NEON + depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800) select CRYPTO_HASH select CRYPTO_CRYPTD select CRYPTO_GF128MUL @@ -118,23 +118,35 @@ config CRYPTO_GHASH_ARM_CE config CRYPTO_CRCT10DIF_ARM_CE tristate "CRCT10DIF digest algorithm using PMULL instructions" - depends on KERNEL_MODE_NEON && CRC_T10DIF + depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800) + depends on CRC_T10DIF select CRYPTO_HASH config CRYPTO_CRC32_ARM_CE tristate "CRC32(C) digest algorithm using CRC and/or PMULL instructions" - depends on KERNEL_MODE_NEON && CRC32 + depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800) + depends on CRC32 select CRYPTO_HASH config CRYPTO_CHACHA20_NEON - tristate "NEON accelerated ChaCha stream cipher algorithms" - depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER - select CRYPTO_CHACHA20 + tristate "NEON and scalar accelerated ChaCha stream cipher algorithms" + select CRYPTO_SKCIPHER + select CRYPTO_ARCH_HAVE_LIB_CHACHA + +config CRYPTO_POLY1305_ARM + tristate "Accelerated scalar and SIMD Poly1305 hash implementations" + select CRYPTO_HASH + select CRYPTO_ARCH_HAVE_LIB_POLY1305 config CRYPTO_NHPOLY1305_NEON tristate "NEON accelerated NHPoly1305 hash function (for Adiantum)" depends on KERNEL_MODE_NEON select CRYPTO_NHPOLY1305 +config CRYPTO_CURVE25519_NEON + tristate "NEON accelerated Curve25519 scalar multiplication library" + depends on KERNEL_MODE_NEON + select CRYPTO_LIB_CURVE25519_GENERIC + select CRYPTO_ARCH_HAVE_LIB_CURVE25519 + endif diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index 4180f3a13512..b745c17d356f 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -10,34 +10,16 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o +obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o +obj-$(CONFIG_CRYPTO_CURVE25519_NEON) += curve25519-neon.o -ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o -ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o -ce-obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o -ce-obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o -ce-obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM_CE) += crct10dif-arm-ce.o -crc-obj-$(CONFIG_CRYPTO_CRC32_ARM_CE) += crc32-arm-ce.o - -ifneq ($(crc-obj-y)$(crc-obj-m),) -ifeq ($(call as-instr,.arch armv8-a\n.arch_extension crc,y,n),y) -ce-obj-y += $(crc-obj-y) -ce-obj-m += $(crc-obj-m) -else -$(warning These CRC Extensions modules need binutils 2.23 or higher) -$(warning $(crc-obj-y) $(crc-obj-m)) -endif -endif - -ifneq ($(ce-obj-y)$(ce-obj-m),) -ifeq ($(call as-instr,.fpu crypto-neon-fp-armv8,y,n),y) -obj-y += $(ce-obj-y) -obj-m += $(ce-obj-m) -else -$(warning These ARMv8 Crypto Extensions modules need binutils 2.23 or higher) -$(warning $(ce-obj-y) $(ce-obj-m)) -endif -endif +obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o +obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o +obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o +obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o +obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM_CE) += crct10dif-arm-ce.o +obj-$(CONFIG_CRYPTO_CRC32_ARM_CE) += crc32-arm-ce.o aes-arm-y := aes-cipher-core.o aes-cipher-glue.o aes-arm-bs-y := aes-neonbs-core.o aes-neonbs-glue.o @@ -53,13 +35,19 @@ aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o crct10dif-arm-ce-y := crct10dif-ce-core.o crct10dif-ce-glue.o crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o -chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o +chacha-neon-y := chacha-scalar-core.o chacha-glue.o +chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o +poly1305-arm-y := poly1305-core.o poly1305-glue.o nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o +curve25519-neon-y := curve25519-core.o curve25519-glue.o ifdef REGENERATE_ARM_CRYPTO quiet_cmd_perl = PERL $@ cmd_perl = $(PERL) $(<) > $(@) +$(src)/poly1305-core.S_shipped: $(src)/poly1305-armv4.pl + $(call cmd,perl) + $(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl $(call cmd,perl) @@ -67,4 +55,9 @@ $(src)/sha512-core.S_shipped: $(src)/sha512-armv4.pl $(call cmd,perl) endif -clean-files += sha256-core.S sha512-core.S +clean-files += poly1305-core.S sha256-core.S sha512-core.S + +# massage the perlasm code a bit so we only get the NEON routine if we need it +poly1305-aflags-$(CONFIG_CPU_V7) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=5 +poly1305-aflags-$(CONFIG_KERNEL_MODE_NEON) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=7 +AFLAGS_poly1305-core.o += $(poly1305-aflags-y) diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c new file mode 100644 index 000000000000..6ebbb2b241d2 --- /dev/null +++ b/arch/arm/crypto/chacha-glue.c @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM NEON accelerated ChaCha and XChaCha stream ciphers, + * including ChaCha20 (RFC7539) + * + * Copyright (C) 2016-2019 Linaro, Ltd. <ard.biesheuvel@linaro.org> + * Copyright (C) 2015 Martin Willi + */ + +#include <crypto/algapi.h> +#include <crypto/internal/chacha.h> +#include <crypto/internal/simd.h> +#include <crypto/internal/skcipher.h> +#include <linux/jump_label.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <asm/cputype.h> +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> + +asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src, + int nrounds); +asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src, + int nrounds); +asmlinkage void hchacha_block_arm(const u32 *state, u32 *out, int nrounds); +asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds); + +asmlinkage void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes, + const u32 *state, int nrounds); + +static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_neon); + +static inline bool neon_usable(void) +{ + return static_branch_likely(&use_neon) && crypto_simd_usable(); +} + +static void chacha_doneon(u32 *state, u8 *dst, const u8 *src, + unsigned int bytes, int nrounds) +{ + u8 buf[CHACHA_BLOCK_SIZE]; + + while (bytes >= CHACHA_BLOCK_SIZE * 4) { + chacha_4block_xor_neon(state, dst, src, nrounds); + bytes -= CHACHA_BLOCK_SIZE * 4; + src += CHACHA_BLOCK_SIZE * 4; + dst += CHACHA_BLOCK_SIZE * 4; + state[12] += 4; + } + while (bytes >= CHACHA_BLOCK_SIZE) { + chacha_block_xor_neon(state, dst, src, nrounds); + bytes -= CHACHA_BLOCK_SIZE; + src += CHACHA_BLOCK_SIZE; + dst += CHACHA_BLOCK_SIZE; + state[12]++; + } + if (bytes) { + memcpy(buf, src, bytes); + chacha_block_xor_neon(state, buf, buf, nrounds); + memcpy(dst, buf, bytes); + } +} + +void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds) +{ + if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable()) { + hchacha_block_arm(state, stream, nrounds); + } else { + kernel_neon_begin(); + hchacha_block_neon(state, stream, nrounds); + kernel_neon_end(); + } +} +EXPORT_SYMBOL(hchacha_block_arch); + +void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv) +{ + chacha_init_generic(state, key, iv); +} +EXPORT_SYMBOL(chacha_init_arch); + +void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes, + int nrounds) +{ + if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable() || + bytes <= CHACHA_BLOCK_SIZE) { + chacha_doarm(dst, src, bytes, state, nrounds); + state[12] += DIV_ROUND_UP(bytes, CHACHA_BLOCK_SIZE); + return; + } + + kernel_neon_begin(); + chacha_doneon(state, dst, src, bytes, nrounds); + kernel_neon_end(); +} +EXPORT_SYMBOL(chacha_crypt_arch); + +static int chacha_stream_xor(struct skcipher_request *req, + const struct chacha_ctx *ctx, const u8 *iv, + bool neon) +{ + struct skcipher_walk walk; + u32 state[16]; + int err; + + err = skcipher_walk_virt(&walk, req, false); + + chacha_init_generic(state, ctx->key, iv); + + while (walk.nbytes > 0) { + unsigned int nbytes = walk.nbytes; + + if (nbytes < walk.total) + nbytes = round_down(nbytes, walk.stride); + + if (!neon) { + chacha_doarm(walk.dst.virt.addr, walk.src.virt.addr, + nbytes, state, ctx->nrounds); + state[12] += DIV_ROUND_UP(nbytes, CHACHA_BLOCK_SIZE); + } else { + kernel_neon_begin(); + chacha_doneon(state, walk.dst.virt.addr, + walk.src.virt.addr, nbytes, ctx->nrounds); + kernel_neon_end(); + } + err = skcipher_walk_done(&walk, walk.nbytes - nbytes); + } + + return err; +} + +static int do_chacha(struct skcipher_request *req, bool neon) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm); + + return chacha_stream_xor(req, ctx, req->iv, neon); +} + +static int chacha_arm(struct skcipher_request *req) +{ + return do_chacha(req, false); +} + +static int chacha_neon(struct skcipher_request *req) +{ + return do_chacha(req, neon_usable()); +} + +static int do_xchacha(struct skcipher_request *req, bool neon) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm); + struct chacha_ctx subctx; + u32 state[16]; + u8 real_iv[16]; + + chacha_init_generic(state, ctx->key, req->iv); + + if (!neon) { + hchacha_block_arm(state, subctx.key, ctx->nrounds); + } else { + kernel_neon_begin(); + hchacha_block_neon(state, subctx.key, ctx->nrounds); + kernel_neon_end(); + } + subctx.nrounds = ctx->nrounds; + + memcpy(&real_iv[0], req->iv + 24, 8); + memcpy(&real_iv[8], req->iv + 16, 8); + return chacha_stream_xor(req, &subctx, real_iv, neon); +} + +static int xchacha_arm(struct skcipher_request *req) +{ + return do_xchacha(req, false); +} + +static int xchacha_neon(struct skcipher_request *req) +{ + return do_xchacha(req, neon_usable()); +} + +static struct skcipher_alg arm_algs[] = { + { + .base.cra_name = "chacha20", + .base.cra_driver_name = "chacha20-arm", + .base.cra_priority = 200, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA_KEY_SIZE, + .max_keysize = CHACHA_KEY_SIZE, + .ivsize = CHACHA_IV_SIZE, + .chunksize = CHACHA_BLOCK_SIZE, + .setkey = chacha20_setkey, + .encrypt = chacha_arm, + .decrypt = chacha_arm, + }, { + .base.cra_name = "xchacha20", + .base.cra_driver_name = "xchacha20-arm", + .base.cra_priority = 200, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA_KEY_SIZE, + .max_keysize = CHACHA_KEY_SIZE, + .ivsize = XCHACHA_IV_SIZE, + .chunksize = CHACHA_BLOCK_SIZE, + .setkey = chacha20_setkey, + .encrypt = xchacha_arm, + .decrypt = xchacha_arm, + }, { + .base.cra_name = "xchacha12", + .base.cra_driver_name = "xchacha12-arm", + .base.cra_priority = 200, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA_KEY_SIZE, + .max_keysize = CHACHA_KEY_SIZE, + .ivsize = XCHACHA_IV_SIZE, + .chunksize = CHACHA_BLOCK_SIZE, + .setkey = chacha12_setkey, + .encrypt = xchacha_arm, + .decrypt = xchacha_arm, + }, +}; + +static struct skcipher_alg neon_algs[] = { + { + .base.cra_name = "chacha20", + .base.cra_driver_name = "chacha20-neon", + .base.cra_priority = 300, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA_KEY_SIZE, + .max_keysize = CHACHA_KEY_SIZE, + .ivsize = CHACHA_IV_SIZE, + .chunksize = CHACHA_BLOCK_SIZE, + .walksize = 4 * CHACHA_BLOCK_SIZE, + .setkey = chacha20_setkey, + .encrypt = chacha_neon, + .decrypt = chacha_neon, + }, { + .base.cra_name = "xchacha20", + .base.cra_driver_name = "xchacha20-neon", + .base.cra_priority = 300, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA_KEY_SIZE, + .max_keysize = CHACHA_KEY_SIZE, + .ivsize = XCHACHA_IV_SIZE, + .chunksize = CHACHA_BLOCK_SIZE, + .walksize = 4 * CHACHA_BLOCK_SIZE, + .setkey = chacha20_setkey, + .encrypt = xchacha_neon, + .decrypt = xchacha_neon, + }, { + .base.cra_name = "xchacha12", + .base.cra_driver_name = "xchacha12-neon", + .base.cra_priority = 300, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA_KEY_SIZE, + .max_keysize = CHACHA_KEY_SIZE, + .ivsize = XCHACHA_IV_SIZE, + .chunksize = CHACHA_BLOCK_SIZE, + .walksize = 4 * CHACHA_BLOCK_SIZE, + .setkey = chacha12_setkey, + .encrypt = xchacha_neon, + .decrypt = xchacha_neon, + } +}; + +static int __init chacha_simd_mod_init(void) +{ + int err = 0; + + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) { + err = crypto_register_skciphers(arm_algs, ARRAY_SIZE(arm_algs)); + if (err) + return err; + } + + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) { + int i; + + switch (read_cpuid_part()) { + case ARM_CPU_PART_CORTEX_A7: + case ARM_CPU_PART_CORTEX_A5: + /* + * The Cortex-A7 and Cortex-A5 do not perform well with + * the NEON implementation but do incredibly with the + * scalar one and use less power. + */ + for (i = 0; i < ARRAY_SIZE(neon_algs); i++) + neon_algs[i].base.cra_priority = 0; + break; + default: + static_branch_enable(&use_neon); + } + + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) { + err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs)); + if (err) + crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs)); + } + } + return err; +} + +static void __exit chacha_simd_mod_fini(void) +{ + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) { + crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs)); + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) + crypto_unregister_skciphers(neon_algs, ARRAY_SIZE(neon_algs)); + } +} + +module_init(chacha_simd_mod_init); +module_exit(chacha_simd_mod_fini); + +MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (scalar and NEON accelerated)"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("chacha20"); +MODULE_ALIAS_CRYPTO("chacha20-arm"); +MODULE_ALIAS_CRYPTO("xchacha20"); +MODULE_ALIAS_CRYPTO("xchacha20-arm"); +MODULE_ALIAS_CRYPTO("xchacha12"); +MODULE_ALIAS_CRYPTO("xchacha12-arm"); +#ifdef CONFIG_KERNEL_MODE_NEON +MODULE_ALIAS_CRYPTO("chacha20-neon"); +MODULE_ALIAS_CRYPTO("xchacha20-neon"); +MODULE_ALIAS_CRYPTO("xchacha12-neon"); +#endif diff --git a/arch/arm/crypto/chacha-neon-glue.c b/arch/arm/crypto/chacha-neon-glue.c deleted file mode 100644 index a8e9b534c8da..000000000000 --- a/arch/arm/crypto/chacha-neon-glue.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * ARM NEON accelerated ChaCha and XChaCha stream ciphers, - * including ChaCha20 (RFC7539) - * - * Copyright (C) 2016 Linaro, Ltd. <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Based on: - * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code - * - * Copyright (C) 2015 Martin Willi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <crypto/algapi.h> -#include <crypto/chacha.h> -#include <crypto/internal/simd.h> -#include <crypto/internal/skcipher.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <asm/hwcap.h> -#include <asm/neon.h> -#include <asm/simd.h> - -asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src, - int nrounds); -asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src, - int nrounds); -asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds); - -static void chacha_doneon(u32 *state, u8 *dst, const u8 *src, - unsigned int bytes, int nrounds) -{ - u8 buf[CHACHA_BLOCK_SIZE]; - - while (bytes >= CHACHA_BLOCK_SIZE * 4) { - chacha_4block_xor_neon(state, dst, src, nrounds); - bytes -= CHACHA_BLOCK_SIZE * 4; - src += CHACHA_BLOCK_SIZE * 4; - dst += CHACHA_BLOCK_SIZE * 4; - state[12] += 4; - } - while (bytes >= CHACHA_BLOCK_SIZE) { - chacha_block_xor_neon(state, dst, src, nrounds); - bytes -= CHACHA_BLOCK_SIZE; - src += CHACHA_BLOCK_SIZE; - dst += CHACHA_BLOCK_SIZE; - state[12]++; - } - if (bytes) { - memcpy(buf, src, bytes); - chacha_block_xor_neon(state, buf, buf, nrounds); - memcpy(dst, buf, bytes); - } -} - -static int chacha_neon_stream_xor(struct skcipher_request *req, - const struct chacha_ctx *ctx, const u8 *iv) -{ - struct skcipher_walk walk; - u32 state[16]; - int err; - - err = skcipher_walk_virt(&walk, req, false); - - crypto_chacha_init(state, ctx, iv); - - while (walk.nbytes > 0) { - unsigned int nbytes = walk.nbytes; - - if (nbytes < walk.total) - nbytes = round_down(nbytes, walk.stride); - - kernel_neon_begin(); - chacha_doneon(state, walk.dst.virt.addr, walk.src.virt.addr, - nbytes, ctx->nrounds); - kernel_neon_end(); - err = skcipher_walk_done(&walk, walk.nbytes - nbytes); - } - - return err; -} - -static int chacha_neon(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm); - - if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable()) - return crypto_chacha_crypt(req); - - return chacha_neon_stream_xor(req, ctx, req->iv); -} - -static int xchacha_neon(struct skcipher_request *req) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm); - struct chacha_ctx subctx; - u32 state[16]; - u8 real_iv[16]; - - if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable()) - return crypto_xchacha_crypt(req); - - crypto_chacha_init(state, ctx, req->iv); - - kernel_neon_begin(); - hchacha_block_neon(state, subctx.key, ctx->nrounds); - kernel_neon_end(); - subctx.nrounds = ctx->nrounds; - - memcpy(&real_iv[0], req->iv + 24, 8); - memcpy(&real_iv[8], req->iv + 16, 8); - return chacha_neon_stream_xor(req, &subctx, real_iv); -} - -static struct skcipher_alg algs[] = { - { - .base.cra_name = "chacha20", - .base.cra_driver_name = "chacha20-neon", - .base.cra_priority = 300, - .base.cra_blocksize = 1, - .base.cra_ctxsize = sizeof(struct chacha_ctx), - .base.cra_module = THIS_MODULE, - - .min_keysize = CHACHA_KEY_SIZE, - .max_keysize = CHACHA_KEY_SIZE, - .ivsize = CHACHA_IV_SIZE, - .chunksize = CHACHA_BLOCK_SIZE, - .walksize = 4 * CHACHA_BLOCK_SIZE, - .setkey = crypto_chacha20_setkey, - .encrypt = chacha_neon, - .decrypt = chacha_neon, - }, { - .base.cra_name = "xchacha20", - .base.cra_driver_name = "xchacha20-neon", - .base.cra_priority = 300, - .base.cra_blocksize = 1, - .base.cra_ctxsize = sizeof(struct chacha_ctx), - .base.cra_module = THIS_MODULE, - - .min_keysize = CHACHA_KEY_SIZE, - .max_keysize = CHACHA_KEY_SIZE, - .ivsize = XCHACHA_IV_SIZE, - .chunksize = CHACHA_BLOCK_SIZE, - .walksize = 4 * CHACHA_BLOCK_SIZE, - .setkey = crypto_chacha20_setkey, - .encrypt = xchacha_neon, - .decrypt = xchacha_neon, - }, { - .base.cra_name = "xchacha12", - .base.cra_driver_name = "xchacha12-neon", - .base.cra_priority = 300, - .base.cra_blocksize = 1, - .base.cra_ctxsize = sizeof(struct chacha_ctx), - .base.cra_module = THIS_MODULE, - - .min_keysize = CHACHA_KEY_SIZE, - .max_keysize = CHACHA_KEY_SIZE, - .ivsize = XCHACHA_IV_SIZE, - .chunksize = CHACHA_BLOCK_SIZE, - .walksize = 4 * CHACHA_BLOCK_SIZE, - .setkey = crypto_chacha12_setkey, - .encrypt = xchacha_neon, - .decrypt = xchacha_neon, - } -}; - -static int __init chacha_simd_mod_init(void) -{ - if (!(elf_hwcap & HWCAP_NEON)) - return -ENODEV; - - return crypto_register_skciphers(algs, ARRAY_SIZE(algs)); -} - -static void __exit chacha_simd_mod_fini(void) -{ - crypto_unregister_skciphers(algs, ARRAY_SIZE(algs)); -} - -module_init(chacha_simd_mod_init); -module_exit(chacha_simd_mod_fini); - -MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (NEON accelerated)"); -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS_CRYPTO("chacha20"); -MODULE_ALIAS_CRYPTO("chacha20-neon"); -MODULE_ALIAS_CRYPTO("xchacha20"); -MODULE_ALIAS_CRYPTO("xchacha20-neon"); -MODULE_ALIAS_CRYPTO("xchacha12"); -MODULE_ALIAS_CRYPTO("xchacha12-neon"); diff --git a/arch/arm/crypto/chacha-scalar-core.S b/arch/arm/crypto/chacha-scalar-core.S new file mode 100644 index 000000000000..2985b80a45b5 --- /dev/null +++ b/arch/arm/crypto/chacha-scalar-core.S @@ -0,0 +1,460 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Google, Inc. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * Design notes: + * + * 16 registers would be needed to hold the state matrix, but only 14 are + * available because 'sp' and 'pc' cannot be used. So we spill the elements + * (x8, x9) to the stack and swap them out with (x10, x11). This adds one + * 'ldrd' and one 'strd' instruction per round. + * + * All rotates are performed using the implicit rotate operand accepted by the + * 'add' and 'eor' instructions. This is faster than using explicit rotate + * instructions. To make this work, we allow the values in the second and last + * rows of the ChaCha state matrix (rows 'b' and 'd') to temporarily have the + * wrong rotation amount. The rotation amount is then fixed up just in time + * when the values are used. 'brot' is the number of bits the values in row 'b' + * need to be rotated right to arrive at the correct values, and 'drot' + * similarly for row 'd'. (brot, drot) start out as (0, 0) but we make it such + * that they end up as (25, 24) after every round. + */ + + // ChaCha state registers + X0 .req r0 + X1 .req r1 + X2 .req r2 + X3 .req r3 + X4 .req r4 + X5 .req r5 + X6 .req r6 + X7 .req r7 + X8_X10 .req r8 // shared by x8 and x10 + X9_X11 .req r9 // shared by x9 and x11 + X12 .req r10 + X13 .req r11 + X14 .req r12 + X15 .req r14 + +.macro __rev out, in, t0, t1, t2 +.if __LINUX_ARM_ARCH__ >= 6 + rev \out, \in +.else + lsl \t0, \in, #24 + and \t1, \in, #0xff00 + and \t2, \in, #0xff0000 + orr \out, \t0, \in, lsr #24 + orr \out, \out, \t1, lsl #8 + orr \out, \out, \t2, lsr #8 +.endif +.endm + +.macro _le32_bswap x, t0, t1, t2 +#ifdef __ARMEB__ + __rev \x, \x, \t0, \t1, \t2 +#endif +.endm + +.macro _le32_bswap_4x a, b, c, d, t0, t1, t2 + _le32_bswap \a, \t0, \t1, \t2 + _le32_bswap \b, \t0, \t1, \t2 + _le32_bswap \c, \t0, \t1, \t2 + _le32_bswap \d, \t0, \t1, \t2 +.endm + +.macro __ldrd a, b, src, offset +#if __LINUX_ARM_ARCH__ >= 6 + ldrd \a, \b, [\src, #\offset] +#else + ldr \a, [\src, #\offset] + ldr \b, [\src, #\offset + 4] +#endif +.endm + +.macro __strd a, b, dst, offset +#if __LINUX_ARM_ARCH__ >= 6 + strd \a, \b, [\dst, #\offset] +#else + str \a, [\dst, #\offset] + str \b, [\dst, #\offset + 4] +#endif +.endm + +.macro _halfround a1, b1, c1, d1, a2, b2, c2, d2 + + // a += b; d ^= a; d = rol(d, 16); + add \a1, \a1, \b1, ror #brot + add \a2, \a2, \b2, ror #brot + eor \d1, \a1, \d1, ror #drot + eor \d2, \a2, \d2, ror #drot + // drot == 32 - 16 == 16 + + // c += d; b ^= c; b = rol(b, 12); + add \c1, \c1, \d1, ror #16 + add \c2, \c2, \d2, ror #16 + eor \b1, \c1, \b1, ror #brot + eor \b2, \c2, \b2, ror #brot + // brot == 32 - 12 == 20 + + // a += b; d ^= a; d = rol(d, 8); + add \a1, \a1, \b1, ror #20 + add \a2, \a2, \b2, ror #20 + eor \d1, \a1, \d1, ror #16 + eor \d2, \a2, \d2, ror #16 + // drot == 32 - 8 == 24 + + // c += d; b ^= c; b = rol(b, 7); + add \c1, \c1, \d1, ror #24 + add \c2, \c2, \d2, ror #24 + eor \b1, \c1, \b1, ror #20 + eor \b2, \c2, \b2, ror #20 + // brot == 32 - 7 == 25 +.endm + +.macro _doubleround + + // column round + + // quarterrounds: (x0, x4, x8, x12) and (x1, x5, x9, x13) + _halfround X0, X4, X8_X10, X12, X1, X5, X9_X11, X13 + + // save (x8, x9); restore (x10, x11) + __strd X8_X10, X9_X11, sp, 0 + __ldrd X8_X10, X9_X11, sp, 8 + + // quarterrounds: (x2, x6, x10, x14) and (x3, x7, x11, x15) + _halfround X2, X6, X8_X10, X14, X3, X7, X9_X11, X15 + + .set brot, 25 + .set drot, 24 + + // diagonal round + + // quarterrounds: (x0, x5, x10, x15) and (x1, x6, x11, x12) + _halfround X0, X5, X8_X10, X15, X1, X6, X9_X11, X12 + + // save (x10, x11); restore (x8, x9) + __strd X8_X10, X9_X11, sp, 8 + __ldrd X8_X10, X9_X11, sp, 0 + + // quarterrounds: (x2, x7, x8, x13) and (x3, x4, x9, x14) + _halfround X2, X7, X8_X10, X13, X3, X4, X9_X11, X14 +.endm + +.macro _chacha_permute nrounds + .set brot, 0 + .set drot, 0 + .rept \nrounds / 2 + _doubleround + .endr +.endm + +.macro _chacha nrounds + +.Lnext_block\@: + // Stack: unused0-unused1 x10-x11 x0-x15 OUT IN LEN + // Registers contain x0-x9,x12-x15. + + // Do the core ChaCha permutation to update x0-x15. + _chacha_permute \nrounds + + add sp, #8 + // Stack: x10-x11 orig_x0-orig_x15 OUT IN LEN + // Registers contain x0-x9,x12-x15. + // x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'. + + // Free up some registers (r8-r12,r14) by pushing (x8-x9,x12-x15). + push {X8_X10, X9_X11, X12, X13, X14, X15} + + // Load (OUT, IN, LEN). + ldr r14, [sp, #96] + ldr r12, [sp, #100] + ldr r11, [sp, #104] + + orr r10, r14, r12 + + // Use slow path if fewer than 64 bytes remain. + cmp r11, #64 + blt .Lxor_slowpath\@ + + // Use slow path if IN and/or OUT isn't 4-byte aligned. Needed even on + // ARMv6+, since ldmia and stmia (used below) still require alignment. + tst r10, #3 + bne .Lxor_slowpath\@ + + // Fast path: XOR 64 bytes of aligned data. + + // Stack: x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN + // Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is OUT. + // x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'. + + // x0-x3 + __ldrd r8, r9, sp, 32 + __ldrd r10, r11, sp, 40 + add X0, X0, r8 + add X1, X1, r9 + add X2, X2, r10 + add X3, X3, r11 + _le32_bswap_4x X0, X1, X2, X3, r8, r9, r10 + ldmia r12!, {r8-r11} + eor X0, X0, r8 + eor X1, X1, r9 + eor X2, X2, r10 + eor X3, X3, r11 + stmia r14!, {X0-X3} + + // x4-x7 + __ldrd r8, r9, sp, 48 + __ldrd r10, r11, sp, 56 + add X4, r8, X4, ror #brot + add X5, r9, X5, ror #brot + ldmia r12!, {X0-X3} + add X6, r10, X6, ror #brot + add X7, r11, X7, ror #brot + _le32_bswap_4x X4, X5, X6, X7, r8, r9, r10 + eor X4, X4, X0 + eor X5, X5, X1 + eor X6, X6, X2 + eor X7, X7, X3 + stmia r14!, {X4-X7} + + // x8-x15 + pop {r0-r7} // (x8-x9,x12-x15,x10-x11) + __ldrd r8, r9, sp, 32 + __ldrd r10, r11, sp, 40 + add r0, r0, r8 // x8 + add r1, r1, r9 // x9 + add r6, r6, r10 // x10 + add r7, r7, r11 // x11 + _le32_bswap_4x r0, r1, r6, r7, r8, r9, r10 + ldmia r12!, {r8-r11} + eor r0, r0, r8 // x8 + eor r1, r1, r9 // x9 + eor r6, r6, r10 // x10 + eor r7, r7, r11 // x11 + stmia r14!, {r0,r1,r6,r7} + ldmia r12!, {r0,r1,r6,r7} + __ldrd r8, r9, sp, 48 + __ldrd r10, r11, sp, 56 + add r2, r8, r2, ror #drot // x12 + add r3, r9, r3, ror #drot // x13 + add r4, r10, r4, ror #drot // x14 + add r5, r11, r5, ror #drot // x15 + _le32_bswap_4x r2, r3, r4, r5, r9, r10, r11 + ldr r9, [sp, #72] // load LEN + eor r2, r2, r0 // x12 + eor r3, r3, r1 // x13 + eor r4, r4, r6 // x14 + eor r5, r5, r7 // x15 + subs r9, #64 // decrement and check LEN + stmia r14!, {r2-r5} + + beq .Ldone\@ + +.Lprepare_for_next_block\@: + + // Stack: x0-x15 OUT IN LEN + + // Increment block counter (x12) + add r8, #1 + + // Store updated (OUT, IN, LEN) + str r14, [sp, #64] + str r12, [sp, #68] + str r9, [sp, #72] + + mov r14, sp + + // Store updated block counter (x12) + str r8, [sp, #48] + + sub sp, #16 + + // Reload state and do next block + ldmia r14!, {r0-r11} // load x0-x11 + __strd r10, r11, sp, 8 // store x10-x11 before state + ldmia r14, {r10-r12,r14} // load x12-x15 + b .Lnext_block\@ + +.Lxor_slowpath\@: + // Slow path: < 64 bytes remaining, or unaligned input or output buffer. + // We handle it by storing the 64 bytes of keystream to the stack, then + // XOR-ing the needed portion with the data. + + // Allocate keystream buffer + sub sp, #64 + mov r14, sp + + // Stack: ks0-ks15 x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN + // Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is &ks0. + // x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'. + + // Save keystream for x0-x3 + __ldrd r8, r9, sp, 96 + __ldrd r10, r11, sp, 104 + add X0, X0, r8 + add X1, X1, r9 + add X2, X2, r10 + add X3, X3, r11 + _le32_bswap_4x X0, X1, X2, X3, r8, r9, r10 + stmia r14!, {X0-X3} + + // Save keystream for x4-x7 + __ldrd r8, r9, sp, 112 + __ldrd r10, r11, sp, 120 + add X4, r8, X4, ror #brot + add X5, r9, X5, ror #brot + add X6, r10, X6, ror #brot + add X7, r11, X7, ror #brot + _le32_bswap_4x X4, X5, X6, X7, r8, r9, r10 + add r8, sp, #64 + stmia r14!, {X4-X7} + + // Save keystream for x8-x15 + ldm r8, {r0-r7} // (x8-x9,x12-x15,x10-x11) + __ldrd r8, r9, sp, 128 + __ldrd r10, r11, sp, 136 + add r0, r0, r8 // x8 + add r1, r1, r9 // x9 + add r6, r6, r10 // x10 + add r7, r7, r11 // x11 + _le32_bswap_4x r0, r1, r6, r7, r8, r9, r10 + stmia r14!, {r0,r1,r6,r7} + __ldrd r8, r9, sp, 144 + __ldrd r10, r11, sp, 152 + add r2, r8, r2, ror #drot // x12 + add r3, r9, r3, ror #drot // x13 + add r4, r10, r4, ror #drot // x14 + add r5, r11, r5, ror #drot // x15 + _le32_bswap_4x r2, r3, r4, r5, r9, r10, r11 + stmia r14, {r2-r5} + + // Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN + // Registers: r8 is block counter, r12 is IN. + + ldr r9, [sp, #168] // LEN + ldr r14, [sp, #160] // OUT + cmp r9, #64 + mov r0, sp + movle r1, r9 + movgt r1, #64 + // r1 is number of bytes to XOR, in range [1, 64] + +.if __LINUX_ARM_ARCH__ < 6 + orr r2, r12, r14 + tst r2, #3 // IN or OUT misaligned? + bne .Lxor_next_byte\@ +.endif + + // XOR a word at a time +.rept 16 + subs r1, #4 + blt .Lxor_words_done\@ + ldr r2, [r12], #4 + ldr r3, [r0], #4 + eor r2, r2, r3 + str r2, [r14], #4 +.endr + b .Lxor_slowpath_done\@ +.Lxor_words_done\@: + ands r1, r1, #3 + beq .Lxor_slowpath_done\@ + + // XOR a byte at a time +.Lxor_next_byte\@: + ldrb r2, [r12], #1 + ldrb r3, [r0], #1 + eor r2, r2, r3 + strb r2, [r14], #1 + subs r1, #1 + bne .Lxor_next_byte\@ + +.Lxor_slowpath_done\@: + subs r9, #64 + add sp, #96 + bgt .Lprepare_for_next_block\@ + +.Ldone\@: +.endm // _chacha + +/* + * void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes, + * const u32 *state, int nrounds); + */ +ENTRY(chacha_doarm) + cmp r2, #0 // len == 0? + reteq lr + + ldr ip, [sp] + cmp ip, #12 + + push {r0-r2,r4-r11,lr} + + // Push state x0-x15 onto stack. + // Also store an extra copy of x10-x11 just before the state. + + add X12, r3, #48 + ldm X12, {X12,X13,X14,X15} + push {X12,X13,X14,X15} + sub sp, sp, #64 + + __ldrd X8_X10, X9_X11, r3, 40 + __strd X8_X10, X9_X11, sp, 8 + __strd X8_X10, X9_X11, sp, 56 + ldm r3, {X0-X9_X11} + __strd X0, X1, sp, 16 + __strd X2, X3, sp, 24 + __strd X4, X5, sp, 32 + __strd X6, X7, sp, 40 + __strd X8_X10, X9_X11, sp, 48 + + beq 1f + _chacha 20 + +0: add sp, #76 + pop {r4-r11, pc} + +1: _chacha 12 + b 0b +ENDPROC(chacha_doarm) + +/* + * void hchacha_block_arm(const u32 state[16], u32 out[8], int nrounds); + */ +ENTRY(hchacha_block_arm) + push {r1,r4-r11,lr} + + cmp r2, #12 // ChaCha12 ? + + mov r14, r0 + ldmia r14!, {r0-r11} // load x0-x11 + push {r10-r11} // store x10-x11 to stack + ldm r14, {r10-r12,r14} // load x12-x15 + sub sp, #8 + + beq 1f + _chacha_permute 20 + + // Skip over (unused0-unused1, x10-x11) +0: add sp, #16 + + // Fix up rotations of x12-x15 + ror X12, X12, #drot + ror X13, X13, #drot + pop {r4} // load 'out' + ror X14, X14, #drot + ror X15, X15, #drot + + // Store (x0-x3,x12-x15) to 'out' + stm r4, {X0,X1,X2,X3,X12,X13,X14,X15} + + pop {r4-r11,pc} + +1: _chacha_permute 12 + b 0b +ENDPROC(hchacha_block_arm) diff --git a/arch/arm/crypto/crct10dif-ce-core.S b/arch/arm/crypto/crct10dif-ce-core.S index 86be258a803f..46c02c518a30 100644 --- a/arch/arm/crypto/crct10dif-ce-core.S +++ b/arch/arm/crypto/crct10dif-ce-core.S @@ -72,7 +72,7 @@ #endif .text - .arch armv7-a + .arch armv8-a .fpu crypto-neon-fp-armv8 init_crc .req r0 diff --git a/arch/arm/crypto/curve25519-core.S b/arch/arm/crypto/curve25519-core.S new file mode 100644 index 000000000000..be18af52e7dc --- /dev/null +++ b/arch/arm/crypto/curve25519-core.S @@ -0,0 +1,2062 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/* + * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. + * + * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This + * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been + * manually reworked for use in kernel space. + */ + +#include <linux/linkage.h> + +.text +.fpu neon +.arch armv7-a +.align 4 + +ENTRY(curve25519_neon) + push {r4-r11, lr} + mov ip, sp + sub r3, sp, #704 + and r3, r3, #0xfffffff0 + mov sp, r3 + movw r4, #0 + movw r5, #254 + vmov.i32 q0, #1 + vshr.u64 q1, q0, #7 + vshr.u64 q0, q0, #8 + vmov.i32 d4, #19 + vmov.i32 d5, #38 + add r6, sp, #480 + vst1.8 {d2-d3}, [r6, : 128]! + vst1.8 {d0-d1}, [r6, : 128]! + vst1.8 {d4-d5}, [r6, : 128] + add r6, r3, #0 + vmov.i32 q2, #0 + vst1.8 {d4-d5}, [r6, : 128]! + vst1.8 {d4-d5}, [r6, : 128]! + vst1.8 d4, [r6, : 64] + add r6, r3, #0 + movw r7, #960 + sub r7, r7, #2 + neg r7, r7 + sub r7, r7, r7, LSL #7 + str r7, [r6] + add r6, sp, #672 + vld1.8 {d4-d5}, [r1]! + vld1.8 {d6-d7}, [r1] + vst1.8 {d4-d5}, [r6, : 128]! + vst1.8 {d6-d7}, [r6, : 128] + sub r1, r6, #16 + ldrb r6, [r1] + and r6, r6, #248 + strb r6, [r1] + ldrb r6, [r1, #31] + and r6, r6, #127 + orr r6, r6, #64 + strb r6, [r1, #31] + vmov.i64 q2, #0xffffffff + vshr.u64 q3, q2, #7 + vshr.u64 q2, q2, #6 + vld1.8 {d8}, [r2] + vld1.8 {d10}, [r2] + add r2, r2, #6 + vld1.8 {d12}, [r2] + vld1.8 {d14}, [r2] + add r2, r2, #6 + vld1.8 {d16}, [r2] + add r2, r2, #4 + vld1.8 {d18}, [r2] + vld1.8 {d20}, [r2] + add r2, r2, #6 + vld1.8 {d22}, [r2] + add r2, r2, #2 + vld1.8 {d24}, [r2] + vld1.8 {d26}, [r2] + vshr.u64 q5, q5, #26 + vshr.u64 q6, q6, #3 + vshr.u64 q7, q7, #29 + vshr.u64 q8, q8, #6 + vshr.u64 q10, q10, #25 + vshr.u64 q11, q11, #3 + vshr.u64 q12, q12, #12 + vshr.u64 q13, q13, #38 + vand q4, q4, q2 + vand q6, q6, q2 + vand q8, q8, q2 + vand q10, q10, q2 + vand q2, q12, q2 + vand q5, q5, q3 + vand q7, q7, q3 + vand q9, q9, q3 + vand q11, q11, q3 + vand q3, q13, q3 + add r2, r3, #48 + vadd.i64 q12, q4, q1 + vadd.i64 q13, q10, q1 + vshr.s64 q12, q12, #26 + vshr.s64 q13, q13, #26 + vadd.i64 q5, q5, q12 + vshl.i64 q12, q12, #26 + vadd.i64 q14, q5, q0 + vadd.i64 q11, q11, q13 + vshl.i64 q13, q13, #26 + vadd.i64 q15, q11, q0 + vsub.i64 q4, q4, q12 + vshr.s64 q12, q14, #25 + vsub.i64 q10, q10, q13 + vshr.s64 q13, q15, #25 + vadd.i64 q6, q6, q12 + vshl.i64 q12, q12, #25 + vadd.i64 q14, q6, q1 + vadd.i64 q2, q2, q13 + vsub.i64 q5, q5, q12 + vshr.s64 q12, q14, #26 + vshl.i64 q13, q13, #25 + vadd.i64 q14, q2, q1 + vadd.i64 q7, q7, q12 + vshl.i64 q12, q12, #26 + vadd.i64 q15, q7, q0 + vsub.i64 q11, q11, q13 + vshr.s64 q13, q14, #26 + vsub.i64 q6, q6, q12 + vshr.s64 q12, q15, #25 + vadd.i64 q3, q3, q13 + vshl.i64 q13, q13, #26 + vadd.i64 q14, q3, q0 + vadd.i64 q8, q8, q12 + vshl.i64 q12, q12, #25 + vadd.i64 q15, q8, q1 + add r2, r2, #8 + vsub.i64 q2, q2, q13 + vshr.s64 q13, q14, #25 + vsub.i64 q7, q7, q12 + vshr.s64 q12, q15, #26 + vadd.i64 q14, q13, q13 + vadd.i64 q9, q9, q12 + vtrn.32 d12, d14 + vshl.i64 q12, q12, #26 + vtrn.32 d13, d15 + vadd.i64 q0, q9, q0 + vadd.i64 q4, q4, q14 + vst1.8 d12, [r2, : 64]! + vshl.i64 q6, q13, #4 + vsub.i64 q7, q8, q12 + vshr.s64 q0, q0, #25 + vadd.i64 q4, q4, q6 + vadd.i64 q6, q10, q0 + vshl.i64 q0, q0, #25 + vadd.i64 q8, q6, q1 + vadd.i64 q4, q4, q13 + vshl.i64 q10, q13, #25 + vadd.i64 q1, q4, q1 + vsub.i64 q0, q9, q0 + vshr.s64 q8, q8, #26 + vsub.i64 q3, q3, q10 + vtrn.32 d14, d0 + vshr.s64 q1, q1, #26 + vtrn.32 d15, d1 + vadd.i64 q0, q11, q8 + vst1.8 d14, [r2, : 64] + vshl.i64 q7, q8, #26 + vadd.i64 q5, q5, q1 + vtrn.32 d4, d6 + vshl.i64 q1, q1, #26 + vtrn.32 d5, d7 + vsub.i64 q3, q6, q7 + add r2, r2, #16 + vsub.i64 q1, q4, q1 + vst1.8 d4, [r2, : 64] + vtrn.32 d6, d0 + vtrn.32 d7, d1 + sub r2, r2, #8 + vtrn.32 d2, d10 + vtrn.32 d3, d11 + vst1.8 d6, [r2, : 64] + sub r2, r2, #24 + vst1.8 d2, [r2, : 64] + add r2, r3, #96 + vmov.i32 q0, #0 + vmov.i64 d2, #0xff + vmov.i64 d3, #0 + vshr.u32 q1, q1, #7 + vst1.8 {d2-d3}, [r2, : 128]! + vst1.8 {d0-d1}, [r2, : 128]! + vst1.8 d0, [r2, : 64] + add r2, r3, #144 + vmov.i32 q0, #0 + vst1.8 {d0-d1}, [r2, : 128]! + vst1.8 {d0-d1}, [r2, : 128]! + vst1.8 d0, [r2, : 64] + add r2, r3, #240 + vmov.i32 q0, #0 + vmov.i64 d2, #0xff + vmov.i64 d3, #0 + vshr.u32 q1, q1, #7 + vst1.8 {d2-d3}, [r2, : 128]! + vst1.8 {d0-d1}, [r2, : 128]! + vst1.8 d0, [r2, : 64] + add r2, r3, #48 + add r6, r3, #192 + vld1.8 {d0-d1}, [r2, : 128]! + vld1.8 {d2-d3}, [r2, : 128]! + vld1.8 {d4}, [r2, : 64] + vst1.8 {d0-d1}, [r6, : 128]! + vst1.8 {d2-d3}, [r6, : 128]! + vst1.8 d4, [r6, : 64] +.Lmainloop: + mov r2, r5, LSR #3 + and r6, r5, #7 + ldrb r2, [r1, r2] + mov r2, r2, LSR r6 + and r2, r2, #1 + str r5, [sp, #456] + eor r4, r4, r2 + str r2, [sp, #460] + neg r2, r4 + add r4, r3, #96 + add r5, r3, #192 + add r6, r3, #144 + vld1.8 {d8-d9}, [r4, : 128]! + add r7, r3, #240 + vld1.8 {d10-d11}, [r5, : 128]! + veor q6, q4, q5 + vld1.8 {d14-d15}, [r6, : 128]! + vdup.i32 q8, r2 + vld1.8 {d18-d19}, [r7, : 128]! + veor q10, q7, q9 + vld1.8 {d22-d23}, [r4, : 128]! + vand q6, q6, q8 + vld1.8 {d24-d25}, [r5, : 128]! + vand q10, q10, q8 + vld1.8 {d26-d27}, [r6, : 128]! + veor q4, q4, q6 + vld1.8 {d28-d29}, [r7, : 128]! + veor q5, q5, q6 + vld1.8 {d0}, [r4, : 64] + veor q6, q7, q10 + vld1.8 {d2}, [r5, : 64] + veor q7, q9, q10 + vld1.8 {d4}, [r6, : 64] + veor q9, q11, q12 + vld1.8 {d6}, [r7, : 64] + veor q10, q0, q1 + sub r2, r4, #32 + vand q9, q9, q8 + sub r4, r5, #32 + vand q10, q10, q8 + sub r5, r6, #32 + veor q11, q11, q9 + sub r6, r7, #32 + veor q0, q0, q10 + veor q9, q12, q9 + veor q1, q1, q10 + veor q10, q13, q14 + veor q12, q2, q3 + vand q10, q10, q8 + vand q8, q12, q8 + veor q12, q13, q10 + veor q2, q2, q8 + veor q10, q14, q10 + veor q3, q3, q8 + vadd.i32 q8, q4, q6 + vsub.i32 q4, q4, q6 + vst1.8 {d16-d17}, [r2, : 128]! + vadd.i32 q6, q11, q12 + vst1.8 {d8-d9}, [r5, : 128]! + vsub.i32 q4, q11, q12 + vst1.8 {d12-d13}, [r2, : 128]! + vadd.i32 q6, q0, q2 + vst1.8 {d8-d9}, [r5, : 128]! + vsub.i32 q0, q0, q2 + vst1.8 d12, [r2, : 64] + vadd.i32 q2, q5, q7 + vst1.8 d0, [r5, : 64] + vsub.i32 q0, q5, q7 + vst1.8 {d4-d5}, [r4, : 128]! + vadd.i32 q2, q9, q10 + vst1.8 {d0-d1}, [r6, : 128]! + vsub.i32 q0, q9, q10 + vst1.8 {d4-d5}, [r4, : 128]! + vadd.i32 q2, q1, q3 + vst1.8 {d0-d1}, [r6, : 128]! + vsub.i32 q0, q1, q3 + vst1.8 d4, [r4, : 64] + vst1.8 d0, [r6, : 64] + add r2, sp, #512 + add r4, r3, #96 + add r5, r3, #144 + vld1.8 {d0-d1}, [r2, : 128] + vld1.8 {d2-d3}, [r4, : 128]! + vld1.8 {d4-d5}, [r5, : 128]! + vzip.i32 q1, q2 + vld1.8 {d6-d7}, [r4, : 128]! + vld1.8 {d8-d9}, [r5, : 128]! + vshl.i32 q5, q1, #1 + vzip.i32 q3, q4 + vshl.i32 q6, q2, #1 + vld1.8 {d14}, [r4, : 64] + vshl.i32 q8, q3, #1 + vld1.8 {d15}, [r5, : 64] + vshl.i32 q9, q4, #1 + vmul.i32 d21, d7, d1 + vtrn.32 d14, d15 + vmul.i32 q11, q4, q0 + vmul.i32 q0, q7, q0 + vmull.s32 q12, d2, d2 + vmlal.s32 q12, d11, d1 + vmlal.s32 q12, d12, d0 + vmlal.s32 q12, d13, d23 + vmlal.s32 q12, d16, d22 + vmlal.s32 q12, d7, d21 + vmull.s32 q10, d2, d11 + vmlal.s32 q10, d4, d1 + vmlal.s32 q10, d13, d0 + vmlal.s32 q10, d6, d23 + vmlal.s32 q10, d17, d22 + vmull.s32 q13, d10, d4 + vmlal.s32 q13, d11, d3 + vmlal.s32 q13, d13, d1 + vmlal.s32 q13, d16, d0 + vmlal.s32 q13, d17, d23 + vmlal.s32 q13, d8, d22 + vmull.s32 q1, d10, d5 + vmlal.s32 q1, d11, d4 + vmlal.s32 q1, d6, d1 + vmlal.s32 q1, d17, d0 + vmlal.s32 q1, d8, d23 + vmull.s32 q14, d10, d6 + vmlal.s32 q14, d11, d13 + vmlal.s32 q14, d4, d4 + vmlal.s32 q14, d17, d1 + vmlal.s32 q14, d18, d0 + vmlal.s32 q14, d9, d23 + vmull.s32 q11, d10, d7 + vmlal.s32 q11, d11, d6 + vmlal.s32 q11, d12, d5 + vmlal.s32 q11, d8, d1 + vmlal.s32 q11, d19, d0 + vmull.s32 q15, d10, d8 + vmlal.s32 q15, d11, d17 + vmlal.s32 q15, d12, d6 + vmlal.s32 q15, d13, d5 + vmlal.s32 q15, d19, d1 + vmlal.s32 q15, d14, d0 + vmull.s32 q2, d10, d9 + vmlal.s32 q2, d11, d8 + vmlal.s32 q2, d12, d7 + vmlal.s32 q2, d13, d6 + vmlal.s32 q2, d14, d1 + vmull.s32 q0, d15, d1 + vmlal.s32 q0, d10, d14 + vmlal.s32 q0, d11, d19 + vmlal.s32 q0, d12, d8 + vmlal.s32 q0, d13, d17 + vmlal.s32 q0, d6, d6 + add r2, sp, #480 + vld1.8 {d18-d19}, [r2, : 128]! + vmull.s32 q3, d16, d7 + vmlal.s32 q3, d10, d15 + vmlal.s32 q3, d11, d14 + vmlal.s32 q3, d12, d9 + vmlal.s32 q3, d13, d8 + vld1.8 {d8-d9}, [r2, : 128] + vadd.i64 q5, q12, q9 + vadd.i64 q6, q15, q9 + vshr.s64 q5, q5, #26 + vshr.s64 q6, q6, #26 + vadd.i64 q7, q10, q5 + vshl.i64 q5, q5, #26 + vadd.i64 q8, q7, q4 + vadd.i64 q2, q2, q6 + vshl.i64 q6, q6, #26 + vadd.i64 q10, q2, q4 + vsub.i64 q5, q12, q5 + vshr.s64 q8, q8, #25 + vsub.i64 q6, q15, q6 + vshr.s64 q10, q10, #25 + vadd.i64 q12, q13, q8 + vshl.i64 q8, q8, #25 + vadd.i64 q13, q12, q9 + vadd.i64 q0, q0, q10 + vsub.i64 q7, q7, q8 + vshr.s64 q8, q13, #26 + vshl.i64 q10, q10, #25 + vadd.i64 q13, q0, q9 + vadd.i64 q1, q1, q8 + vshl.i64 q8, q8, #26 + vadd.i64 q15, q1, q4 + vsub.i64 q2, q2, q10 + vshr.s64 q10, q13, #26 + vsub.i64 q8, q12, q8 + vshr.s64 q12, q15, #25 + vadd.i64 q3, q3, q10 + vshl.i64 q10, q10, #26 + vadd.i64 q13, q3, q4 + vadd.i64 q14, q14, q12 + add r2, r3, #288 + vshl.i64 q12, q12, #25 + add r4, r3, #336 + vadd.i64 q15, q14, q9 + add r2, r2, #8 + vsub.i64 q0, q0, q10 + add r4, r4, #8 + vshr.s64 q10, q13, #25 + vsub.i64 q1, q1, q12 + vshr.s64 q12, q15, #26 + vadd.i64 q13, q10, q10 + vadd.i64 q11, q11, q12 + vtrn.32 d16, d2 + vshl.i64 q12, q12, #26 + vtrn.32 d17, d3 + vadd.i64 q1, q11, q4 + vadd.i64 q4, q5, q13 + vst1.8 d16, [r2, : 64]! + vshl.i64 q5, q10, #4 + vst1.8 d17, [r4, : 64]! + vsub.i64 q8, q14, q12 + vshr.s64 q1, q1, #25 + vadd.i64 q4, q4, q5 + vadd.i64 q5, q6, q1 + vshl.i64 q1, q1, #25 + vadd.i64 q6, q5, q9 + vadd.i64 q4, q4, q10 + vshl.i64 q10, q10, #25 + vadd.i64 q9, q4, q9 + vsub.i64 q1, q11, q1 + vshr.s64 q6, q6, #26 + vsub.i64 q3, q3, q10 + vtrn.32 d16, d2 + vshr.s64 q9, q9, #26 + vtrn.32 d17, d3 + vadd.i64 q1, q2, q6 + vst1.8 d16, [r2, : 64] + vshl.i64 q2, q6, #26 + vst1.8 d17, [r4, : 64] + vadd.i64 q6, q7, q9 + vtrn.32 d0, d6 + vshl.i64 q7, q9, #26 + vtrn.32 d1, d7 + vsub.i64 q2, q5, q2 + add r2, r2, #16 + vsub.i64 q3, q4, q7 + vst1.8 d0, [r2, : 64] + add r4, r4, #16 + vst1.8 d1, [r4, : 64] + vtrn.32 d4, d2 + vtrn.32 d5, d3 + sub r2, r2, #8 + sub r4, r4, #8 + vtrn.32 d6, d12 + vtrn.32 d7, d13 + vst1.8 d4, [r2, : 64] + vst1.8 d5, [r4, : 64] + sub r2, r2, #24 + sub r4, r4, #24 + vst1.8 d6, [r2, : 64] + vst1.8 d7, [r4, : 64] + add r2, r3, #240 + add r4, r3, #96 + vld1.8 {d0-d1}, [r4, : 128]! + vld1.8 {d2-d3}, [r4, : 128]! + vld1.8 {d4}, [r4, : 64] + add r4, r3, #144 + vld1.8 {d6-d7}, [r4, : 128]! + vtrn.32 q0, q3 + vld1.8 {d8-d9}, [r4, : 128]! + vshl.i32 q5, q0, #4 + vtrn.32 q1, q4 + vshl.i32 q6, q3, #4 + vadd.i32 q5, q5, q0 + vadd.i32 q6, q6, q3 + vshl.i32 q7, q1, #4 + vld1.8 {d5}, [r4, : 64] + vshl.i32 q8, q4, #4 + vtrn.32 d4, d5 + vadd.i32 q7, q7, q1 + vadd.i32 q8, q8, q4 + vld1.8 {d18-d19}, [r2, : 128]! + vshl.i32 q10, q2, #4 + vld1.8 {d22-d23}, [r2, : 128]! + vadd.i32 q10, q10, q2 + vld1.8 {d24}, [r2, : 64] + vadd.i32 q5, q5, q0 + add r2, r3, #192 + vld1.8 {d26-d27}, [r2, : 128]! + vadd.i32 q6, q6, q3 + vld1.8 {d28-d29}, [r2, : 128]! + vadd.i32 q8, q8, q4 + vld1.8 {d25}, [r2, : 64] + vadd.i32 q10, q10, q2 + vtrn.32 q9, q13 + vadd.i32 q7, q7, q1 + vadd.i32 q5, q5, q0 + vtrn.32 q11, q14 + vadd.i32 q6, q6, q3 + add r2, sp, #528 + vadd.i32 q10, q10, q2 + vtrn.32 d24, d25 + vst1.8 {d12-d13}, [r2, : 128]! + vshl.i32 q6, q13, #1 + vst1.8 {d20-d21}, [r2, : 128]! + vshl.i32 q10, q14, #1 + vst1.8 {d12-d13}, [r2, : 128]! + vshl.i32 q15, q12, #1 + vadd.i32 q8, q8, q4 + vext.32 d10, d31, d30, #0 + vadd.i32 q7, q7, q1 + vst1.8 {d16-d17}, [r2, : 128]! + vmull.s32 q8, d18, d5 + vmlal.s32 q8, d26, d4 + vmlal.s32 q8, d19, d9 + vmlal.s32 q8, d27, d3 + vmlal.s32 q8, d22, d8 + vmlal.s32 q8, d28, d2 + vmlal.s32 q8, d23, d7 + vmlal.s32 q8, d29, d1 + vmlal.s32 q8, d24, d6 + vmlal.s32 q8, d25, d0 + vst1.8 {d14-d15}, [r2, : 128]! + vmull.s32 q2, d18, d4 + vmlal.s32 q2, d12, d9 + vmlal.s32 q2, d13, d8 + vmlal.s32 q2, d19, d3 + vmlal.s32 q2, d22, d2 + vmlal.s32 q2, d23, d1 + vmlal.s32 q2, d24, d0 + vst1.8 {d20-d21}, [r2, : 128]! + vmull.s32 q7, d18, d9 + vmlal.s32 q7, d26, d3 + vmlal.s32 q7, d19, d8 + vmlal.s32 q7, d27, d2 + vmlal.s32 q7, d22, d7 + vmlal.s32 q7, d28, d1 + vmlal.s32 q7, d23, d6 + vmlal.s32 q7, d29, d0 + vst1.8 {d10-d11}, [r2, : 128]! + vmull.s32 q5, d18, d3 + vmlal.s32 q5, d19, d2 + vmlal.s32 q5, d22, d1 + vmlal.s32 q5, d23, d0 + vmlal.s32 q5, d12, d8 + vst1.8 {d16-d17}, [r2, : 128] + vmull.s32 q4, d18, d8 + vmlal.s32 q4, d26, d2 + vmlal.s32 q4, d19, d7 + vmlal.s32 q4, d27, d1 + vmlal.s32 q4, d22, d6 + vmlal.s32 q4, d28, d0 + vmull.s32 q8, d18, d7 + vmlal.s32 q8, d26, d1 + vmlal.s32 q8, d19, d6 + vmlal.s32 q8, d27, d0 + add r2, sp, #544 + vld1.8 {d20-d21}, [r2, : 128] + vmlal.s32 q7, d24, d21 + vmlal.s32 q7, d25, d20 + vmlal.s32 q4, d23, d21 + vmlal.s32 q4, d29, d20 + vmlal.s32 q8, d22, d21 + vmlal.s32 q8, d28, d20 + vmlal.s32 q5, d24, d20 + vst1.8 {d14-d15}, [r2, : 128] + vmull.s32 q7, d18, d6 + vmlal.s32 q7, d26, d0 + add r2, sp, #624 + vld1.8 {d30-d31}, [r2, : 128] + vmlal.s32 q2, d30, d21 + vmlal.s32 q7, d19, d21 + vmlal.s32 q7, d27, d20 + add r2, sp, #592 + vld1.8 {d26-d27}, [r2, : 128] + vmlal.s32 q4, d25, d27 + vmlal.s32 q8, d29, d27 + vmlal.s32 q8, d25, d26 + vmlal.s32 q7, d28, d27 + vmlal.s32 q7, d29, d26 + add r2, sp, #576 + vld1.8 {d28-d29}, [r2, : 128] + vmlal.s32 q4, d24, d29 + vmlal.s32 q8, d23, d29 + vmlal.s32 q8, d24, d28 + vmlal.s32 q7, d22, d29 + vmlal.s32 q7, d23, d28 + vst1.8 {d8-d9}, [r2, : 128] + add r2, sp, #528 + vld1.8 {d8-d9}, [r2, : 128] + vmlal.s32 q7, d24, d9 + vmlal.s32 q7, d25, d31 + vmull.s32 q1, d18, d2 + vmlal.s32 q1, d19, d1 + vmlal.s32 q1, d22, d0 + vmlal.s32 q1, d24, d27 + vmlal.s32 q1, d23, d20 + vmlal.s32 q1, d12, d7 + vmlal.s32 q1, d13, d6 + vmull.s32 q6, d18, d1 + vmlal.s32 q6, d19, d0 + vmlal.s32 q6, d23, d27 + vmlal.s32 q6, d22, d20 + vmlal.s32 q6, d24, d26 + vmull.s32 q0, d18, d0 + vmlal.s32 q0, d22, d27 + vmlal.s32 q0, d23, d26 + vmlal.s32 q0, d24, d31 + vmlal.s32 q0, d19, d20 + add r2, sp, #608 + vld1.8 {d18-d19}, [r2, : 128] + vmlal.s32 q2, d18, d7 + vmlal.s32 q5, d18, d6 + vmlal.s32 q1, d18, d21 + vmlal.s32 q0, d18, d28 + vmlal.s32 q6, d18, d29 + vmlal.s32 q2, d19, d6 + vmlal.s32 q5, d19, d21 + vmlal.s32 q1, d19, d29 + vmlal.s32 q0, d19, d9 + vmlal.s32 q6, d19, d28 + add r2, sp, #560 + vld1.8 {d18-d19}, [r2, : 128] + add r2, sp, #480 + vld1.8 {d22-d23}, [r2, : 128] + vmlal.s32 q5, d19, d7 + vmlal.s32 q0, d18, d21 + vmlal.s32 q0, d19, d29 + vmlal.s32 q6, d18, d6 + add r2, sp, #496 + vld1.8 {d6-d7}, [r2, : 128] + vmlal.s32 q6, d19, d21 + add r2, sp, #544 + vld1.8 {d18-d19}, [r2, : 128] + vmlal.s32 q0, d30, d8 + add r2, sp, #640 + vld1.8 {d20-d21}, [r2, : 128] + vmlal.s32 q5, d30, d29 + add r2, sp, #576 + vld1.8 {d24-d25}, [r2, : 128] + vmlal.s32 q1, d30, d28 + vadd.i64 q13, q0, q11 + vadd.i64 q14, q5, q11 + vmlal.s32 q6, d30, d9 + vshr.s64 q4, q13, #26 + vshr.s64 q13, q14, #26 + vadd.i64 q7, q7, q4 + vshl.i64 q4, q4, #26 + vadd.i64 q14, q7, q3 + vadd.i64 q9, q9, q13 + vshl.i64 q13, q13, #26 + vadd.i64 q15, q9, q3 + vsub.i64 q0, q0, q4 + vshr.s64 q4, q14, #25 + vsub.i64 q5, q5, q13 + vshr.s64 q13, q15, #25 + vadd.i64 q6, q6, q4 + vshl.i64 q4, q4, #25 + vadd.i64 q14, q6, q11 + vadd.i64 q2, q2, q13 + vsub.i64 q4, q7, q4 + vshr.s64 q7, q14, #26 + vshl.i64 q13, q13, #25 + vadd.i64 q14, q2, q11 + vadd.i64 q8, q8, q7 + vshl.i64 q7, q7, #26 + vadd.i64 q15, q8, q3 + vsub.i64 q9, q9, q13 + vshr.s64 q13, q14, #26 + vsub.i64 q6, q6, q7 + vshr.s64 q7, q15, #25 + vadd.i64 q10, q10, q13 + vshl.i64 q13, q13, #26 + vadd.i64 q14, q10, q3 + vadd.i64 q1, q1, q7 + add r2, r3, #144 + vshl.i64 q7, q7, #25 + add r4, r3, #96 + vadd.i64 q15, q1, q11 + add r2, r2, #8 + vsub.i64 q2, q2, q13 + add r4, r4, #8 + vshr.s64 q13, q14, #25 + vsub.i64 q7, q8, q7 + vshr.s64 q8, q15, #26 + vadd.i64 q14, q13, q13 + vadd.i64 q12, q12, q8 + vtrn.32 d12, d14 + vshl.i64 q8, q8, #26 + vtrn.32 d13, d15 + vadd.i64 q3, q12, q3 + vadd.i64 q0, q0, q14 + vst1.8 d12, [r2, : 64]! + vshl.i64 q7, q13, #4 + vst1.8 d13, [r4, : 64]! + vsub.i64 q1, q1, q8 + vshr.s64 q3, q3, #25 + vadd.i64 q0, q0, q7 + vadd.i64 q5, q5, q3 + vshl.i64 q3, q3, #25 + vadd.i64 q6, q5, q11 + vadd.i64 q0, q0, q13 + vshl.i64 q7, q13, #25 + vadd.i64 q8, q0, q11 + vsub.i64 q3, q12, q3 + vshr.s64 q6, q6, #26 + vsub.i64 q7, q10, q7 + vtrn.32 d2, d6 + vshr.s64 q8, q8, #26 + vtrn.32 d3, d7 + vadd.i64 q3, q9, q6 + vst1.8 d2, [r2, : 64] + vshl.i64 q6, q6, #26 + vst1.8 d3, [r4, : 64] + vadd.i64 q1, q4, q8 + vtrn.32 d4, d14 + vshl.i64 q4, q8, #26 + vtrn.32 d5, d15 + vsub.i64 q5, q5, q6 + add r2, r2, #16 + vsub.i64 q0, q0, q4 + vst1.8 d4, [r2, : 64] + add r4, r4, #16 + vst1.8 d5, [r4, : 64] + vtrn.32 d10, d6 + vtrn.32 d11, d7 + sub r2, r2, #8 + sub r4, r4, #8 + vtrn.32 d0, d2 + vtrn.32 d1, d3 + vst1.8 d10, [r2, : 64] + vst1.8 d11, [r4, : 64] + sub r2, r2, #24 + sub r4, r4, #24 + vst1.8 d0, [r2, : 64] + vst1.8 d1, [r4, : 64] + add r2, r3, #288 + add r4, r3, #336 + vld1.8 {d0-d1}, [r2, : 128]! + vld1.8 {d2-d3}, [r4, : 128]! + vsub.i32 q0, q0, q1 + vld1.8 {d2-d3}, [r2, : 128]! + vld1.8 {d4-d5}, [r4, : 128]! + vsub.i32 q1, q1, q2 + add r5, r3, #240 + vld1.8 {d4}, [r2, : 64] + vld1.8 {d6}, [r4, : 64] + vsub.i32 q2, q2, q3 + vst1.8 {d0-d1}, [r5, : 128]! + vst1.8 {d2-d3}, [r5, : 128]! + vst1.8 d4, [r5, : 64] + add r2, r3, #144 + add r4, r3, #96 + add r5, r3, #144 + add r6, r3, #192 + vld1.8 {d0-d1}, [r2, : 128]! + vld1.8 {d2-d3}, [r4, : 128]! + vsub.i32 q2, q0, q1 + vadd.i32 q0, q0, q1 + vld1.8 {d2-d3}, [r2, : 128]! + vld1.8 {d6-d7}, [r4, : 128]! + vsub.i32 q4, q1, q3 + vadd.i32 q1, q1, q3 + vld1.8 {d6}, [r2, : 64] + vld1.8 {d10}, [r4, : 64] + vsub.i32 q6, q3, q5 + vadd.i32 q3, q3, q5 + vst1.8 {d4-d5}, [r5, : 128]! + vst1.8 {d0-d1}, [r6, : 128]! + vst1.8 {d8-d9}, [r5, : 128]! + vst1.8 {d2-d3}, [r6, : 128]! + vst1.8 d12, [r5, : 64] + vst1.8 d6, [r6, : 64] + add r2, r3, #0 + add r4, r3, #240 + vld1.8 {d0-d1}, [r4, : 128]! + vld1.8 {d2-d3}, [r4, : 128]! + vld1.8 {d4}, [r4, : 64] + add r4, r3, #336 + vld1.8 {d6-d7}, [r4, : 128]! + vtrn.32 q0, q3 + vld1.8 {d8-d9}, [r4, : 128]! + vshl.i32 q5, q0, #4 + vtrn.32 q1, q4 + vshl.i32 q6, q3, #4 + vadd.i32 q5, q5, q0 + vadd.i32 q6, q6, q3 + vshl.i32 q7, q1, #4 + vld1.8 {d5}, [r4, : 64] + vshl.i32 q8, q4, #4 + vtrn.32 d4, d5 + vadd.i32 q7, q7, q1 + vadd.i32 q8, q8, q4 + vld1.8 {d18-d19}, [r2, : 128]! + vshl.i32 q10, q2, #4 + vld1.8 {d22-d23}, [r2, : 128]! + vadd.i32 q10, q10, q2 + vld1.8 {d24}, [r2, : 64] + vadd.i32 q5, q5, q0 + add r2, r3, #288 + vld1.8 {d26-d27}, [r2, : 128]! + vadd.i32 q6, q6, q3 + vld1.8 {d28-d29}, [r2, : 128]! + vadd.i32 q8, q8, q4 + vld1.8 {d25}, [r2, : 64] + vadd.i32 q10, q10, q2 + vtrn.32 q9, q13 + vadd.i32 q7, q7, q1 + vadd.i32 q5, q5, q0 + vtrn.32 q11, q14 + vadd.i32 q6, q6, q3 + add r2, sp, #528 + vadd.i32 q10, q10, q2 + vtrn.32 d24, d25 + vst1.8 {d12-d13}, [r2, : 128]! + vshl.i32 q6, q13, #1 + vst1.8 {d20-d21}, [r2, : 128]! + vshl.i32 q10, q14, #1 + vst1.8 {d12-d13}, [r2, : 128]! + vshl.i32 q15, q12, #1 + vadd.i32 q8, q8, q4 + vext.32 d10, d31, d30, #0 + vadd.i32 q7, q7, q1 + vst1.8 {d16-d17}, [r2, : 128]! + vmull.s32 q8, d18, d5 + vmlal.s32 q8, d26, d4 + vmlal.s32 q8, d19, d9 + vmlal.s32 q8, d27, d3 + vmlal.s32 q8, d22, d8 + vmlal.s32 q8, d28, d2 + vmlal.s32 q8, d23, d7 + vmlal.s32 q8, d29, d1 + vmlal.s32 q8, d24, d6 + vmlal.s32 q8, d25, d0 + vst1.8 {d14-d15}, [r2, : 128]! + vmull.s32 q2, d18, d4 + vmlal.s32 q2, d12, d9 + vmlal.s32 q2, d13, d8 + vmlal.s32 q2, d19, d3 + vmlal.s32 q2, d22, d2 + vmlal.s32 q2, d23, d1 + vmlal.s32 q2, d24, d0 + vst1.8 {d20-d21}, [r2, : 128]! + vmull.s32 q7, d18, d9 + vmlal.s32 q7, d26, d3 + vmlal.s32 q7, d19, d8 + vmlal.s32 q7, d27, d2 + vmlal.s32 q7, d22, d7 + vmlal.s32 q7, d28, d1 + vmlal.s32 q7, d23, d6 + vmlal.s32 q7, d29, d0 + vst1.8 {d10-d11}, [r2, : 128]! + vmull.s32 q5, d18, d3 + vmlal.s32 q5, d19, d2 + vmlal.s32 q5, d22, d1 + vmlal.s32 q5, d23, d0 + vmlal.s32 q5, d12, d8 + vst1.8 {d16-d17}, [r2, : 128]! + vmull.s32 q4, d18, d8 + vmlal.s32 q4, d26, d2 + vmlal.s32 q4, d19, d7 + vmlal.s32 q4, d27, d1 + vmlal.s32 q4, d22, d6 + vmlal.s32 q4, d28, d0 + vmull.s32 q8, d18, d7 + vmlal.s32 q8, d26, d1 + vmlal.s32 q8, d19, d6 + vmlal.s32 q8, d27, d0 + add r2, sp, #544 + vld1.8 {d20-d21}, [r2, : 128] + vmlal.s32 q7, d24, d21 + vmlal.s32 q7, d25, d20 + vmlal.s32 q4, d23, d21 + vmlal.s32 q4, d29, d20 + vmlal.s32 q8, d22, d21 + vmlal.s32 q8, d28, d20 + vmlal.s32 q5, d24, d20 + vst1.8 {d14-d15}, [r2, : 128] + vmull.s32 q7, d18, d6 + vmlal.s32 q7, d26, d0 + add r2, sp, #624 + vld1.8 {d30-d31}, [r2, : 128] + vmlal.s32 q2, d30, d21 + vmlal.s32 q7, d19, d21 + vmlal.s32 q7, d27, d20 + add r2, sp, #592 + vld1.8 {d26-d27}, [r2, : 128] + vmlal.s32 q4, d25, d27 + vmlal.s32 q8, d29, d27 + vmlal.s32 q8, d25, d26 + vmlal.s32 q7, d28, d27 + vmlal.s32 q7, d29, d26 + add r2, sp, #576 + vld1.8 {d28-d29}, [r2, : 128] + vmlal.s32 q4, d24, d29 + vmlal.s32 q8, d23, d29 + vmlal.s32 q8, d24, d28 + vmlal.s32 q7, d22, d29 + vmlal.s32 q7, d23, d28 + vst1.8 {d8-d9}, [r2, : 128] + add r2, sp, #528 + vld1.8 {d8-d9}, [r2, : 128] + vmlal.s32 q7, d24, d9 + vmlal.s32 q7, d25, d31 + vmull.s32 q1, d18, d2 + vmlal.s32 q1, d19, d1 + vmlal.s32 q1, d22, d0 + vmlal.s32 q1, d24, d27 + vmlal.s32 q1, d23, d20 + vmlal.s32 q1, d12, d7 + vmlal.s32 q1, d13, d6 + vmull.s32 q6, d18, d1 + vmlal.s32 q6, d19, d0 + vmlal.s32 q6, d23, d27 + vmlal.s32 q6, d22, d20 + vmlal.s32 q6, d24, d26 + vmull.s32 q0, d18, d0 + vmlal.s32 q0, d22, d27 + vmlal.s32 q0, d23, d26 + vmlal.s32 q0, d24, d31 + vmlal.s32 q0, d19, d20 + add r2, sp, #608 + vld1.8 {d18-d19}, [r2, : 128] + vmlal.s32 q2, d18, d7 + vmlal.s32 q5, d18, d6 + vmlal.s32 q1, d18, d21 + vmlal.s32 q0, d18, d28 + vmlal.s32 q6, d18, d29 + vmlal.s32 q2, d19, d6 + vmlal.s32 q5, d19, d21 + vmlal.s32 q1, d19, d29 + vmlal.s32 q0, d19, d9 + vmlal.s32 q6, d19, d28 + add r2, sp, #560 + vld1.8 {d18-d19}, [r2, : 128] + add r2, sp, #480 + vld1.8 {d22-d23}, [r2, : 128] + vmlal.s32 q5, d19, d7 + vmlal.s32 q0, d18, d21 + vmlal.s32 q0, d19, d29 + vmlal.s32 q6, d18, d6 + add r2, sp, #496 + vld1.8 {d6-d7}, [r2, : 128] + vmlal.s32 q6, d19, d21 + add r2, sp, #544 + vld1.8 {d18-d19}, [r2, : 128] + vmlal.s32 q0, d30, d8 + add r2, sp, #640 + vld1.8 {d20-d21}, [r2, : 128] + vmlal.s32 q5, d30, d29 + add r2, sp, #576 + vld1.8 {d24-d25}, [r2, : 128] + vmlal.s32 q1, d30, d28 + vadd.i64 q13, q0, q11 + vadd.i64 q14, q5, q11 + vmlal.s32 q6, d30, d9 + vshr.s64 q4, q13, #26 + vshr.s64 q13, q14, #26 + vadd.i64 q7, q7, q4 + vshl.i64 q4, q4, #26 + vadd.i64 q14, q7, q3 + vadd.i64 q9, q9, q13 + vshl.i64 q13, q13, #26 + vadd.i64 q15, q9, q3 + vsub.i64 q0, q0, q4 + vshr.s64 q4, q14, #25 + vsub.i64 q5, q5, q13 + vshr.s64 q13, q15, #25 + vadd.i64 q6, q6, q4 + vshl.i64 q4, q4, #25 + vadd.i64 q14, q6, q11 + vadd.i64 q2, q2, q13 + vsub.i64 q4, q7, q4 + vshr.s64 q7, q14, #26 + vshl.i64 q13, q13, #25 + vadd.i64 q14, q2, q11 + vadd.i64 q8, q8, q7 + vshl.i64 q7, q7, #26 + vadd.i64 q15, q8, q3 + vsub.i64 q9, q9, q13 + vshr.s64 q13, q14, #26 + vsub.i64 q6, q6, q7 + vshr.s64 q7, q15, #25 + vadd.i64 q10, q10, q13 + vshl.i64 q13, q13, #26 + vadd.i64 q14, q10, q3 + vadd.i64 q1, q1, q7 + add r2, r3, #288 + vshl.i64 q7, q7, #25 + add r4, r3, #96 + vadd.i64 q15, q1, q11 + add r2, r2, #8 + vsub.i64 q2, q2, q13 + add r4, r4, #8 + vshr.s64 q13, q14, #25 + vsub.i64 q7, q8, q7 + vshr.s64 q8, q15, #26 + vadd.i64 q14, q13, q13 + vadd.i64 q12, q12, q8 + vtrn.32 d12, d14 + vshl.i64 q8, q8, #26 + vtrn.32 d13, d15 + vadd.i64 q3, q12, q3 + vadd.i64 q0, q0, q14 + vst1.8 d12, [r2, : 64]! + vshl.i64 q7, q13, #4 + vst1.8 d13, [r4, : 64]! + vsub.i64 q1, q1, q8 + vshr.s64 q3, q3, #25 + vadd.i64 q0, q0, q7 + vadd.i64 q5, q5, q3 + vshl.i64 q3, q3, #25 + vadd.i64 q6, q5, q11 + vadd.i64 q0, q0, q13 + vshl.i64 q7, q13, #25 + vadd.i64 q8, q0, q11 + vsub.i64 q3, q12, q3 + vshr.s64 q6, q6, #26 + vsub.i64 q7, q10, q7 + vtrn.32 d2, d6 + vshr.s64 q8, q8, #26 + vtrn.32 d3, d7 + vadd.i64 q3, q9, q6 + vst1.8 d2, [r2, : 64] + vshl.i64 q6, q6, #26 + vst1.8 d3, [r4, : 64] + vadd.i64 q1, q4, q8 + vtrn.32 d4, d14 + vshl.i64 q4, q8, #26 + vtrn.32 d5, d15 + vsub.i64 q5, q5, q6 + add r2, r2, #16 + vsub.i64 q0, q0, q4 + vst1.8 d4, [r2, : 64] + add r4, r4, #16 + vst1.8 d5, [r4, : 64] + vtrn.32 d10, d6 + vtrn.32 d11, d7 + sub r2, r2, #8 + sub r4, r4, #8 + vtrn.32 d0, d2 + vtrn.32 d1, d3 + vst1.8 d10, [r2, : 64] + vst1.8 d11, [r4, : 64] + sub r2, r2, #24 + sub r4, r4, #24 + vst1.8 d0, [r2, : 64] + vst1.8 d1, [r4, : 64] + add r2, sp, #512 + add r4, r3, #144 + add r5, r3, #192 + vld1.8 {d0-d1}, [r2, : 128] + vld1.8 {d2-d3}, [r4, : 128]! + vld1.8 {d4-d5}, [r5, : 128]! + vzip.i32 q1, q2 + vld1.8 {d6-d7}, [r4, : 128]! + vld1.8 {d8-d9}, [r5, : 128]! + vshl.i32 q5, q1, #1 + vzip.i32 q3, q4 + vshl.i32 q6, q2, #1 + vld1.8 {d14}, [r4, : 64] + vshl.i32 q8, q3, #1 + vld1.8 {d15}, [r5, : 64] + vshl.i32 q9, q4, #1 + vmul.i32 d21, d7, d1 + vtrn.32 d14, d15 + vmul.i32 q11, q4, q0 + vmul.i32 q0, q7, q0 + vmull.s32 q12, d2, d2 + vmlal.s32 q12, d11, d1 + vmlal.s32 q12, d12, d0 + vmlal.s32 q12, d13, d23 + vmlal.s32 q12, d16, d22 + vmlal.s32 q12, d7, d21 + vmull.s32 q10, d2, d11 + vmlal.s32 q10, d4, d1 + vmlal.s32 q10, d13, d0 + vmlal.s32 q10, d6, d23 + vmlal.s32 q10, d17, d22 + vmull.s32 q13, d10, d4 + vmlal.s32 q13, d11, d3 + vmlal.s32 q13, d13, d1 + vmlal.s32 q13, d16, d0 + vmlal.s32 q13, d17, d23 + vmlal.s32 q13, d8, d22 + vmull.s32 q1, d10, d5 + vmlal.s32 q1, d11, d4 + vmlal.s32 q1, d6, d1 + vmlal.s32 q1, d17, d0 + vmlal.s32 q1, d8, d23 + vmull.s32 q14, d10, d6 + vmlal.s32 q14, d11, d13 + vmlal.s32 q14, d4, d4 + vmlal.s32 q14, d17, d1 + vmlal.s32 q14, d18, d0 + vmlal.s32 q14, d9, d23 + vmull.s32 q11, d10, d7 + vmlal.s32 q11, d11, d6 + vmlal.s32 q11, d12, d5 + vmlal.s32 q11, d8, d1 + vmlal.s32 q11, d19, d0 + vmull.s32 q15, d10, d8 + vmlal.s32 q15, d11, d17 + vmlal.s32 q15, d12, d6 + vmlal.s32 q15, d13, d5 + vmlal.s32 q15, d19, d1 + vmlal.s32 q15, d14, d0 + vmull.s32 q2, d10, d9 + vmlal.s32 q2, d11, d8 + vmlal.s32 q2, d12, d7 + vmlal.s32 q2, d13, d6 + vmlal.s32 q2, d14, d1 + vmull.s32 q0, d15, d1 + vmlal.s32 q0, d10, d14 + vmlal.s32 q0, d11, d19 + vmlal.s32 q0, d12, d8 + vmlal.s32 q0, d13, d17 + vmlal.s32 q0, d6, d6 + add r2, sp, #480 + vld1.8 {d18-d19}, [r2, : 128]! + vmull.s32 q3, d16, d7 + vmlal.s32 q3, d10, d15 + vmlal.s32 q3, d11, d14 + vmlal.s32 q3, d12, d9 + vmlal.s32 q3, d13, d8 + vld1.8 {d8-d9}, [r2, : 128] + vadd.i64 q5, q12, q9 + vadd.i64 q6, q15, q9 + vshr.s64 q5, q5, #26 + vshr.s64 q6, q6, #26 + vadd.i64 q7, q10, q5 + vshl.i64 q5, q5, #26 + vadd.i64 q8, q7, q4 + vadd.i64 q2, q2, q6 + vshl.i64 q6, q6, #26 + vadd.i64 q10, q2, q4 + vsub.i64 q5, q12, q5 + vshr.s64 q8, q8, #25 + vsub.i64 q6, q15, q6 + vshr.s64 q10, q10, #25 + vadd.i64 q12, q13, q8 + vshl.i64 q8, q8, #25 + vadd.i64 q13, q12, q9 + vadd.i64 q0, q0, q10 + vsub.i64 q7, q7, q8 + vshr.s64 q8, q13, #26 + vshl.i64 q10, q10, #25 + vadd.i64 q13, q0, q9 + vadd.i64 q1, q1, q8 + vshl.i64 q8, q8, #26 + vadd.i64 q15, q1, q4 + vsub.i64 q2, q2, q10 + vshr.s64 q10, q13, #26 + vsub.i64 q8, q12, q8 + vshr.s64 q12, q15, #25 + vadd.i64 q3, q3, q10 + vshl.i64 q10, q10, #26 + vadd.i64 q13, q3, q4 + vadd.i64 q14, q14, q12 + add r2, r3, #144 + vshl.i64 q12, q12, #25 + add r4, r3, #192 + vadd.i64 q15, q14, q9 + add r2, r2, #8 + vsub.i64 q0, q0, q10 + add r4, r4, #8 + vshr.s64 q10, q13, #25 + vsub.i64 q1, q1, q12 + vshr.s64 q12, q15, #26 + vadd.i64 q13, q10, q10 + vadd.i64 q11, q11, q12 + vtrn.32 d16, d2 + vshl.i64 q12, q12, #26 + vtrn.32 d17, d3 + vadd.i64 q1, q11, q4 + vadd.i64 q4, q5, q13 + vst1.8 d16, [r2, : 64]! + vshl.i64 q5, q10, #4 + vst1.8 d17, [r4, : 64]! + vsub.i64 q8, q14, q12 + vshr.s64 q1, q1, #25 + vadd.i64 q4, q4, q5 + vadd.i64 q5, q6, q1 + vshl.i64 q1, q1, #25 + vadd.i64 q6, q5, q9 + vadd.i64 q4, q4, q10 + vshl.i64 q10, q10, #25 + vadd.i64 q9, q4, q9 + vsub.i64 q1, q11, q1 + vshr.s64 q6, q6, #26 + vsub.i64 q3, q3, q10 + vtrn.32 d16, d2 + vshr.s64 q9, q9, #26 + vtrn.32 d17, d3 + vadd.i64 q1, q2, q6 + vst1.8 d16, [r2, : 64] + vshl.i64 q2, q6, #26 + vst1.8 d17, [r4, : 64] + vadd.i64 q6, q7, q9 + vtrn.32 d0, d6 + vshl.i64 q7, q9, #26 + vtrn.32 d1, d7 + vsub.i64 q2, q5, q2 + add r2, r2, #16 + vsub.i64 q3, q4, q7 + vst1.8 d0, [r2, : 64] + add r4, r4, #16 + vst1.8 d1, [r4, : 64] + vtrn.32 d4, d2 + vtrn.32 d5, d3 + sub r2, r2, #8 + sub r4, r4, #8 + vtrn.32 d6, d12 + vtrn.32 d7, d13 + vst1.8 d4, [r2, : 64] + vst1.8 d5, [r4, : 64] + sub r2, r2, #24 + sub r4, r4, #24 + vst1.8 d6, [r2, : 64] + vst1.8 d7, [r4, : 64] + add r2, r3, #336 + add r4, r3, #288 + vld1.8 {d0-d1}, [r2, : 128]! + vld1.8 {d2-d3}, [r4, : 128]! + vadd.i32 q0, q0, q1 + vld1.8 {d2-d3}, [r2, : 128]! + vld1.8 {d4-d5}, [r4, : 128]! + vadd.i32 q1, q1, q2 + add r5, r3, #288 + vld1.8 {d4}, [r2, : 64] + vld1.8 {d6}, [r4, : 64] + vadd.i32 q2, q2, q3 + vst1.8 {d0-d1}, [r5, : 128]! + vst1.8 {d2-d3}, [r5, : 128]! + vst1.8 d4, [r5, : 64] + add r2, r3, #48 + add r4, r3, #144 + vld1.8 {d0-d1}, [r4, : 128]! + vld1.8 {d2-d3}, [r4, : 128]! + vld1.8 {d4}, [r4, : 64] + add r4, r3, #288 + vld1.8 {d6-d7}, [r4, : 128]! + vtrn.32 q0, q3 + vld1.8 {d8-d9}, [r4, : 128]! + vshl.i32 q5, q0, #4 + vtrn.32 q1, q4 + vshl.i32 q6, q3, #4 + vadd.i32 q5, q5, q0 + vadd.i32 q6, q6, q3 + vshl.i32 q7, q1, #4 + vld1.8 {d5}, [r4, : 64] + vshl.i32 q8, q4, #4 + vtrn.32 d4, d5 + vadd.i32 q7, q7, q1 + vadd.i32 q8, q8, q4 + vld1.8 {d18-d19}, [r2, : 128]! + vshl.i32 q10, q2, #4 + vld1.8 {d22-d23}, [r2, : 128]! + vadd.i32 q10, q10, q2 + vld1.8 {d24}, [r2, : 64] + vadd.i32 q5, q5, q0 + add r2, r3, #240 + vld1.8 {d26-d27}, [r2, : 128]! + vadd.i32 q6, q6, q3 + vld1.8 {d28-d29}, [r2, : 128]! + vadd.i32 q8, q8, q4 + vld1.8 {d25}, [r2, : 64] + vadd.i32 q10, q10, q2 + vtrn.32 q9, q13 + vadd.i32 q7, q7, q1 + vadd.i32 q5, q5, q0 + vtrn.32 q11, q14 + vadd.i32 q6, q6, q3 + add r2, sp, #528 + vadd.i32 q10, q10, q2 + vtrn.32 d24, d25 + vst1.8 {d12-d13}, [r2, : 128]! + vshl.i32 q6, q13, #1 + vst1.8 {d20-d21}, [r2, : 128]! + vshl.i32 q10, q14, #1 + vst1.8 {d12-d13}, [r2, : 128]! + vshl.i32 q15, q12, #1 + vadd.i32 q8, q8, q4 + vext.32 d10, d31, d30, #0 + vadd.i32 q7, q7, q1 + vst1.8 {d16-d17}, [r2, : 128]! + vmull.s32 q8, d18, d5 + vmlal.s32 q8, d26, d4 + vmlal.s32 q8, d19, d9 + vmlal.s32 q8, d27, d3 + vmlal.s32 q8, d22, d8 + vmlal.s32 q8, d28, d2 + vmlal.s32 q8, d23, d7 + vmlal.s32 q8, d29, d1 + vmlal.s32 q8, d24, d6 + vmlal.s32 q8, d25, d0 + vst1.8 {d14-d15}, [r2, : 128]! + vmull.s32 q2, d18, d4 + vmlal.s32 q2, d12, d9 + vmlal.s32 q2, d13, d8 + vmlal.s32 q2, d19, d3 + vmlal.s32 q2, d22, d2 + vmlal.s32 q2, d23, d1 + vmlal.s32 q2, d24, d0 + vst1.8 {d20-d21}, [r2, : 128]! + vmull.s32 q7, d18, d9 + vmlal.s32 q7, d26, d3 + vmlal.s32 q7, d19, d8 + vmlal.s32 q7, d27, d2 + vmlal.s32 q7, d22, d7 + vmlal.s32 q7, d28, d1 + vmlal.s32 q7, d23, d6 + vmlal.s32 q7, d29, d0 + vst1.8 {d10-d11}, [r2, : 128]! + vmull.s32 q5, d18, d3 + vmlal.s32 q5, d19, d2 + vmlal.s32 q5, d22, d1 + vmlal.s32 q5, d23, d0 + vmlal.s32 q5, d12, d8 + vst1.8 {d16-d17}, [r2, : 128]! + vmull.s32 q4, d18, d8 + vmlal.s32 q4, d26, d2 + vmlal.s32 q4, d19, d7 + vmlal.s32 q4, d27, d1 + vmlal.s32 q4, d22, d6 + vmlal.s32 q4, d28, d0 + vmull.s32 q8, d18, d7 + vmlal.s32 q8, d26, d1 + vmlal.s32 q8, d19, d6 + vmlal.s32 q8, d27, d0 + add r2, sp, #544 + vld1.8 {d20-d21}, [r2, : 128] + vmlal.s32 q7, d24, d21 + vmlal.s32 q7, d25, d20 + vmlal.s32 q4, d23, d21 + vmlal.s32 q4, d29, d20 + vmlal.s32 q8, d22, d21 + vmlal.s32 q8, d28, d20 + vmlal.s32 q5, d24, d20 + vst1.8 {d14-d15}, [r2, : 128] + vmull.s32 q7, d18, d6 + vmlal.s32 q7, d26, d0 + add r2, sp, #624 + vld1.8 {d30-d31}, [r2, : 128] + vmlal.s32 q2, d30, d21 + vmlal.s32 q7, d19, d21 + vmlal.s32 q7, d27, d20 + add r2, sp, #592 + vld1.8 {d26-d27}, [r2, : 128] + vmlal.s32 q4, d25, d27 + vmlal.s32 q8, d29, d27 + vmlal.s32 q8, d25, d26 + vmlal.s32 q7, d28, d27 + vmlal.s32 q7, d29, d26 + add r2, sp, #576 + vld1.8 {d28-d29}, [r2, : 128] + vmlal.s32 q4, d24, d29 + vmlal.s32 q8, d23, d29 + vmlal.s32 q8, d24, d28 + vmlal.s32 q7, d22, d29 + vmlal.s32 q7, d23, d28 + vst1.8 {d8-d9}, [r2, : 128] + add r2, sp, #528 + vld1.8 {d8-d9}, [r2, : 128] + vmlal.s32 q7, d24, d9 + vmlal.s32 q7, d25, d31 + vmull.s32 q1, d18, d2 + vmlal.s32 q1, d19, d1 + vmlal.s32 q1, d22, d0 + vmlal.s32 q1, d24, d27 + vmlal.s32 q1, d23, d20 + vmlal.s32 q1, d12, d7 + vmlal.s32 q1, d13, d6 + vmull.s32 q6, d18, d1 + vmlal.s32 q6, d19, d0 + vmlal.s32 q6, d23, d27 + vmlal.s32 q6, d22, d20 + vmlal.s32 q6, d24, d26 + vmull.s32 q0, d18, d0 + vmlal.s32 q0, d22, d27 + vmlal.s32 q0, d23, d26 + vmlal.s32 q0, d24, d31 + vmlal.s32 q0, d19, d20 + add r2, sp, #608 + vld1.8 {d18-d19}, [r2, : 128] + vmlal.s32 q2, d18, d7 + vmlal.s32 q5, d18, d6 + vmlal.s32 q1, d18, d21 + vmlal.s32 q0, d18, d28 + vmlal.s32 q6, d18, d29 + vmlal.s32 q2, d19, d6 + vmlal.s32 q5, d19, d21 + vmlal.s32 q1, d19, d29 + vmlal.s32 q0, d19, d9 + vmlal.s32 q6, d19, d28 + add r2, sp, #560 + vld1.8 {d18-d19}, [r2, : 128] + add r2, sp, #480 + vld1.8 {d22-d23}, [r2, : 128] + vmlal.s32 q5, d19, d7 + vmlal.s32 q0, d18, d21 + vmlal.s32 q0, d19, d29 + vmlal.s32 q6, d18, d6 + add r2, sp, #496 + vld1.8 {d6-d7}, [r2, : 128] + vmlal.s32 q6, d19, d21 + add r2, sp, #544 + vld1.8 {d18-d19}, [r2, : 128] + vmlal.s32 q0, d30, d8 + add r2, sp, #640 + vld1.8 {d20-d21}, [r2, : 128] + vmlal.s32 q5, d30, d29 + add r2, sp, #576 + vld1.8 {d24-d25}, [r2, : 128] + vmlal.s32 q1, d30, d28 + vadd.i64 q13, q0, q11 + vadd.i64 q14, q5, q11 + vmlal.s32 q6, d30, d9 + vshr.s64 q4, q13, #26 + vshr.s64 q13, q14, #26 + vadd.i64 q7, q7, q4 + vshl.i64 q4, q4, #26 + vadd.i64 q14, q7, q3 + vadd.i64 q9, q9, q13 + vshl.i64 q13, q13, #26 + vadd.i64 q15, q9, q3 + vsub.i64 q0, q0, q4 + vshr.s64 q4, q14, #25 + vsub.i64 q5, q5, q13 + vshr.s64 q13, q15, #25 + vadd.i64 q6, q6, q4 + vshl.i64 q4, q4, #25 + vadd.i64 q14, q6, q11 + vadd.i64 q2, q2, q13 + vsub.i64 q4, q7, q4 + vshr.s64 q7, q14, #26 + vshl.i64 q13, q13, #25 + vadd.i64 q14, q2, q11 + vadd.i64 q8, q8, q7 + vshl.i64 q7, q7, #26 + vadd.i64 q15, q8, q3 + vsub.i64 q9, q9, q13 + vshr.s64 q13, q14, #26 + vsub.i64 q6, q6, q7 + vshr.s64 q7, q15, #25 + vadd.i64 q10, q10, q13 + vshl.i64 q13, q13, #26 + vadd.i64 q14, q10, q3 + vadd.i64 q1, q1, q7 + add r2, r3, #240 + vshl.i64 q7, q7, #25 + add r4, r3, #144 + vadd.i64 q15, q1, q11 + add r2, r2, #8 + vsub.i64 q2, q2, q13 + add r4, r4, #8 + vshr.s64 q13, q14, #25 + vsub.i64 q7, q8, q7 + vshr.s64 q8, q15, #26 + vadd.i64 q14, q13, q13 + vadd.i64 q12, q12, q8 + vtrn.32 d12, d14 + vshl.i64 q8, q8, #26 + vtrn.32 d13, d15 + vadd.i64 q3, q12, q3 + vadd.i64 q0, q0, q14 + vst1.8 d12, [r2, : 64]! + vshl.i64 q7, q13, #4 + vst1.8 d13, [r4, : 64]! + vsub.i64 q1, q1, q8 + vshr.s64 q3, q3, #25 + vadd.i64 q0, q0, q7 + vadd.i64 q5, q5, q3 + vshl.i64 q3, q3, #25 + vadd.i64 q6, q5, q11 + vadd.i64 q0, q0, q13 + vshl.i64 q7, q13, #25 + vadd.i64 q8, q0, q11 + vsub.i64 q3, q12, q3 + vshr.s64 q6, q6, #26 + vsub.i64 q7, q10, q7 + vtrn.32 d2, d6 + vshr.s64 q8, q8, #26 + vtrn.32 d3, d7 + vadd.i64 q3, q9, q6 + vst1.8 d2, [r2, : 64] + vshl.i64 q6, q6, #26 + vst1.8 d3, [r4, : 64] + vadd.i64 q1, q4, q8 + vtrn.32 d4, d14 + vshl.i64 q4, q8, #26 + vtrn.32 d5, d15 + vsub.i64 q5, q5, q6 + add r2, r2, #16 + vsub.i64 q0, q0, q4 + vst1.8 d4, [r2, : 64] + add r4, r4, #16 + vst1.8 d5, [r4, : 64] + vtrn.32 d10, d6 + vtrn.32 d11, d7 + sub r2, r2, #8 + sub r4, r4, #8 + vtrn.32 d0, d2 + vtrn.32 d1, d3 + vst1.8 d10, [r2, : 64] + vst1.8 d11, [r4, : 64] + sub r2, r2, #24 + sub r4, r4, #24 + vst1.8 d0, [r2, : 64] + vst1.8 d1, [r4, : 64] + ldr r2, [sp, #456] + ldr r4, [sp, #460] + subs r5, r2, #1 + bge .Lmainloop + add r1, r3, #144 + add r2, r3, #336 + vld1.8 {d0-d1}, [r1, : 128]! + vld1.8 {d2-d3}, [r1, : 128]! + vld1.8 {d4}, [r1, : 64] + vst1.8 {d0-d1}, [r2, : 128]! + vst1.8 {d2-d3}, [r2, : 128]! + vst1.8 d4, [r2, : 64] + movw r1, #0 +.Linvertloop: + add r2, r3, #144 + movw r4, #0 + movw r5, #2 + cmp r1, #1 + moveq r5, #1 + addeq r2, r3, #336 + addeq r4, r3, #48 + cmp r1, #2 + moveq r5, #1 + addeq r2, r3, #48 + cmp r1, #3 + moveq r5, #5 + addeq r4, r3, #336 + cmp r1, #4 + moveq r5, #10 + cmp r1, #5 + moveq r5, #20 + cmp r1, #6 + moveq r5, #10 + addeq r2, r3, #336 + addeq r4, r3, #336 + cmp r1, #7 + moveq r5, #50 + cmp r1, #8 + moveq r5, #100 + cmp r1, #9 + moveq r5, #50 + addeq r2, r3, #336 + cmp r1, #10 + moveq r5, #5 + addeq r2, r3, #48 + cmp r1, #11 + moveq r5, #0 + addeq r2, r3, #96 + add r6, r3, #144 + add r7, r3, #288 + vld1.8 {d0-d1}, [r6, : 128]! + vld1.8 {d2-d3}, [r6, : 128]! + vld1.8 {d4}, [r6, : 64] + vst1.8 {d0-d1}, [r7, : 128]! + vst1.8 {d2-d3}, [r7, : 128]! + vst1.8 d4, [r7, : 64] + cmp r5, #0 + beq .Lskipsquaringloop +.Lsquaringloop: + add r6, r3, #288 + add r7, r3, #288 + add r8, r3, #288 + vmov.i32 q0, #19 + vmov.i32 q1, #0 + vmov.i32 q2, #1 + vzip.i32 q1, q2 + vld1.8 {d4-d5}, [r7, : 128]! + vld1.8 {d6-d7}, [r7, : 128]! + vld1.8 {d9}, [r7, : 64] + vld1.8 {d10-d11}, [r6, : 128]! + add r7, sp, #384 + vld1.8 {d12-d13}, [r6, : 128]! + vmul.i32 q7, q2, q0 + vld1.8 {d8}, [r6, : 64] + vext.32 d17, d11, d10, #1 + vmul.i32 q9, q3, q0 + vext.32 d16, d10, d8, #1 + vshl.u32 q10, q5, q1 + vext.32 d22, d14, d4, #1 + vext.32 d24, d18, d6, #1 + vshl.u32 q13, q6, q1 + vshl.u32 d28, d8, d2 + vrev64.i32 d22, d22 + vmul.i32 d1, d9, d1 + vrev64.i32 d24, d24 + vext.32 d29, d8, d13, #1 + vext.32 d0, d1, d9, #1 + vrev64.i32 d0, d0 + vext.32 d2, d9, d1, #1 + vext.32 d23, d15, d5, #1 + vmull.s32 q4, d20, d4 + vrev64.i32 d23, d23 + vmlal.s32 q4, d21, d1 + vrev64.i32 d2, d2 + vmlal.s32 q4, d26, d19 + vext.32 d3, d5, d15, #1 + vmlal.s32 q4, d27, d18 + vrev64.i32 d3, d3 + vmlal.s32 q4, d28, d15 + vext.32 d14, d12, d11, #1 + vmull.s32 q5, d16, d23 + vext.32 d15, d13, d12, #1 + vmlal.s32 q5, d17, d4 + vst1.8 d8, [r7, : 64]! + vmlal.s32 q5, d14, d1 + vext.32 d12, d9, d8, #0 + vmlal.s32 q5, d15, d19 + vmov.i64 d13, #0 + vmlal.s32 q5, d29, d18 + vext.32 d25, d19, d7, #1 + vmlal.s32 q6, d20, d5 + vrev64.i32 d25, d25 + vmlal.s32 q6, d21, d4 + vst1.8 d11, [r7, : 64]! + vmlal.s32 q6, d26, d1 + vext.32 d9, d10, d10, #0 + vmlal.s32 q6, d27, d19 + vmov.i64 d8, #0 + vmlal.s32 q6, d28, d18 + vmlal.s32 q4, d16, d24 + vmlal.s32 q4, d17, d5 + vmlal.s32 q4, d14, d4 + vst1.8 d12, [r7, : 64]! + vmlal.s32 q4, d15, d1 + vext.32 d10, d13, d12, #0 + vmlal.s32 q4, d29, d19 + vmov.i64 d11, #0 + vmlal.s32 q5, d20, d6 + vmlal.s32 q5, d21, d5 + vmlal.s32 q5, d26, d4 + vext.32 d13, d8, d8, #0 + vmlal.s32 q5, d27, d1 + vmov.i64 d12, #0 + vmlal.s32 q5, d28, d19 + vst1.8 d9, [r7, : 64]! + vmlal.s32 q6, d16, d25 + vmlal.s32 q6, d17, d6 + vst1.8 d10, [r7, : 64] + vmlal.s32 q6, d14, d5 + vext.32 d8, d11, d10, #0 + vmlal.s32 q6, d15, d4 + vmov.i64 d9, #0 + vmlal.s32 q6, d29, d1 + vmlal.s32 q4, d20, d7 + vmlal.s32 q4, d21, d6 + vmlal.s32 q4, d26, d5 + vext.32 d11, d12, d12, #0 + vmlal.s32 q4, d27, d4 + vmov.i64 d10, #0 + vmlal.s32 q4, d28, d1 + vmlal.s32 q5, d16, d0 + sub r6, r7, #32 + vmlal.s32 q5, d17, d7 + vmlal.s32 q5, d14, d6 + vext.32 d30, d9, d8, #0 + vmlal.s32 q5, d15, d5 + vld1.8 {d31}, [r6, : 64]! + vmlal.s32 q5, d29, d4 + vmlal.s32 q15, d20, d0 + vext.32 d0, d6, d18, #1 + vmlal.s32 q15, d21, d25 + vrev64.i32 d0, d0 + vmlal.s32 q15, d26, d24 + vext.32 d1, d7, d19, #1 + vext.32 d7, d10, d10, #0 + vmlal.s32 q15, d27, d23 + vrev64.i32 d1, d1 + vld1.8 {d6}, [r6, : 64] + vmlal.s32 q15, d28, d22 + vmlal.s32 q3, d16, d4 + add r6, r6, #24 + vmlal.s32 q3, d17, d2 + vext.32 d4, d31, d30, #0 + vmov d17, d11 + vmlal.s32 q3, d14, d1 + vext.32 d11, d13, d13, #0 + vext.32 d13, d30, d30, #0 + vmlal.s32 q3, d15, d0 + vext.32 d1, d8, d8, #0 + vmlal.s32 q3, d29, d3 + vld1.8 {d5}, [r6, : 64] + sub r6, r6, #16 + vext.32 d10, d6, d6, #0 + vmov.i32 q1, #0xffffffff + vshl.i64 q4, q1, #25 + add r7, sp, #480 + vld1.8 {d14-d15}, [r7, : 128] + vadd.i64 q9, q2, q7 + vshl.i64 q1, q1, #26 + vshr.s64 q10, q9, #26 + vld1.8 {d0}, [r6, : 64]! + vadd.i64 q5, q5, q10 + vand q9, q9, q1 + vld1.8 {d16}, [r6, : 64]! + add r6, sp, #496 + vld1.8 {d20-d21}, [r6, : 128] + vadd.i64 q11, q5, q10 + vsub.i64 q2, q2, q9 + vshr.s64 q9, q11, #25 + vext.32 d12, d5, d4, #0 + vand q11, q11, q4 + vadd.i64 q0, q0, q9 + vmov d19, d7 + vadd.i64 q3, q0, q7 + vsub.i64 q5, q5, q11 + vshr.s64 q11, q3, #26 + vext.32 d18, d11, d10, #0 + vand q3, q3, q1 + vadd.i64 q8, q8, q11 + vadd.i64 q11, q8, q10 + vsub.i64 q0, q0, q3 + vshr.s64 q3, q11, #25 + vand q11, q11, q4 + vadd.i64 q3, q6, q3 + vadd.i64 q6, q3, q7 + vsub.i64 q8, q8, q11 + vshr.s64 q11, q6, #26 + vand q6, q6, q1 + vadd.i64 q9, q9, q11 + vadd.i64 d25, d19, d21 + vsub.i64 q3, q3, q6 + vshr.s64 d23, d25, #25 + vand q4, q12, q4 + vadd.i64 d21, d23, d23 + vshl.i64 d25, d23, #4 + vadd.i64 d21, d21, d23 + vadd.i64 d25, d25, d21 + vadd.i64 d4, d4, d25 + vzip.i32 q0, q8 + vadd.i64 d12, d4, d14 + add r6, r8, #8 + vst1.8 d0, [r6, : 64] + vsub.i64 d19, d19, d9 + add r6, r6, #16 + vst1.8 d16, [r6, : 64] + vshr.s64 d22, d12, #26 + vand q0, q6, q1 + vadd.i64 d10, d10, d22 + vzip.i32 q3, q9 + vsub.i64 d4, d4, d0 + sub r6, r6, #8 + vst1.8 d6, [r6, : 64] + add r6, r6, #16 + vst1.8 d18, [r6, : 64] + vzip.i32 q2, q5 + sub r6, r6, #32 + vst1.8 d4, [r6, : 64] + subs r5, r5, #1 + bhi .Lsquaringloop +.Lskipsquaringloop: + mov r2, r2 + add r5, r3, #288 + add r6, r3, #144 + vmov.i32 q0, #19 + vmov.i32 q1, #0 + vmov.i32 q2, #1 + vzip.i32 q1, q2 + vld1.8 {d4-d5}, [r5, : 128]! + vld1.8 {d6-d7}, [r5, : 128]! + vld1.8 {d9}, [r5, : 64] + vld1.8 {d10-d11}, [r2, : 128]! + add r5, sp, #384 + vld1.8 {d12-d13}, [r2, : 128]! + vmul.i32 q7, q2, q0 + vld1.8 {d8}, [r2, : 64] + vext.32 d17, d11, d10, #1 + vmul.i32 q9, q3, q0 + vext.32 d16, d10, d8, #1 + vshl.u32 q10, q5, q1 + vext.32 d22, d14, d4, #1 + vext.32 d24, d18, d6, #1 + vshl.u32 q13, q6, q1 + vshl.u32 d28, d8, d2 + vrev64.i32 d22, d22 + vmul.i32 d1, d9, d1 + vrev64.i32 d24, d24 + vext.32 d29, d8, d13, #1 + vext.32 d0, d1, d9, #1 + vrev64.i32 d0, d0 + vext.32 d2, d9, d1, #1 + vext.32 d23, d15, d5, #1 + vmull.s32 q4, d20, d4 + vrev64.i32 d23, d23 + vmlal.s32 q4, d21, d1 + vrev64.i32 d2, d2 + vmlal.s32 q4, d26, d19 + vext.32 d3, d5, d15, #1 + vmlal.s32 q4, d27, d18 + vrev64.i32 d3, d3 + vmlal.s32 q4, d28, d15 + vext.32 d14, d12, d11, #1 + vmull.s32 q5, d16, d23 + vext.32 d15, d13, d12, #1 + vmlal.s32 q5, d17, d4 + vst1.8 d8, [r5, : 64]! + vmlal.s32 q5, d14, d1 + vext.32 d12, d9, d8, #0 + vmlal.s32 q5, d15, d19 + vmov.i64 d13, #0 + vmlal.s32 q5, d29, d18 + vext.32 d25, d19, d7, #1 + vmlal.s32 q6, d20, d5 + vrev64.i32 d25, d25 + vmlal.s32 q6, d21, d4 + vst1.8 d11, [r5, : 64]! + vmlal.s32 q6, d26, d1 + vext.32 d9, d10, d10, #0 + vmlal.s32 q6, d27, d19 + vmov.i64 d8, #0 + vmlal.s32 q6, d28, d18 + vmlal.s32 q4, d16, d24 + vmlal.s32 q4, d17, d5 + vmlal.s32 q4, d14, d4 + vst1.8 d12, [r5, : 64]! + vmlal.s32 q4, d15, d1 + vext.32 d10, d13, d12, #0 + vmlal.s32 q4, d29, d19 + vmov.i64 d11, #0 + vmlal.s32 q5, d20, d6 + vmlal.s32 q5, d21, d5 + vmlal.s32 q5, d26, d4 + vext.32 d13, d8, d8, #0 + vmlal.s32 q5, d27, d1 + vmov.i64 d12, #0 + vmlal.s32 q5, d28, d19 + vst1.8 d9, [r5, : 64]! + vmlal.s32 q6, d16, d25 + vmlal.s32 q6, d17, d6 + vst1.8 d10, [r5, : 64] + vmlal.s32 q6, d14, d5 + vext.32 d8, d11, d10, #0 + vmlal.s32 q6, d15, d4 + vmov.i64 d9, #0 + vmlal.s32 q6, d29, d1 + vmlal.s32 q4, d20, d7 + vmlal.s32 q4, d21, d6 + vmlal.s32 q4, d26, d5 + vext.32 d11, d12, d12, #0 + vmlal.s32 q4, d27, d4 + vmov.i64 d10, #0 + vmlal.s32 q4, d28, d1 + vmlal.s32 q5, d16, d0 + sub r2, r5, #32 + vmlal.s32 q5, d17, d7 + vmlal.s32 q5, d14, d6 + vext.32 d30, d9, d8, #0 + vmlal.s32 q5, d15, d5 + vld1.8 {d31}, [r2, : 64]! + vmlal.s32 q5, d29, d4 + vmlal.s32 q15, d20, d0 + vext.32 d0, d6, d18, #1 + vmlal.s32 q15, d21, d25 + vrev64.i32 d0, d0 + vmlal.s32 q15, d26, d24 + vext.32 d1, d7, d19, #1 + vext.32 d7, d10, d10, #0 + vmlal.s32 q15, d27, d23 + vrev64.i32 d1, d1 + vld1.8 {d6}, [r2, : 64] + vmlal.s32 q15, d28, d22 + vmlal.s32 q3, d16, d4 + add r2, r2, #24 + vmlal.s32 q3, d17, d2 + vext.32 d4, d31, d30, #0 + vmov d17, d11 + vmlal.s32 q3, d14, d1 + vext.32 d11, d13, d13, #0 + vext.32 d13, d30, d30, #0 + vmlal.s32 q3, d15, d0 + vext.32 d1, d8, d8, #0 + vmlal.s32 q3, d29, d3 + vld1.8 {d5}, [r2, : 64] + sub r2, r2, #16 + vext.32 d10, d6, d6, #0 + vmov.i32 q1, #0xffffffff + vshl.i64 q4, q1, #25 + add r5, sp, #480 + vld1.8 {d14-d15}, [r5, : 128] + vadd.i64 q9, q2, q7 + vshl.i64 q1, q1, #26 + vshr.s64 q10, q9, #26 + vld1.8 {d0}, [r2, : 64]! + vadd.i64 q5, q5, q10 + vand q9, q9, q1 + vld1.8 {d16}, [r2, : 64]! + add r2, sp, #496 + vld1.8 {d20-d21}, [r2, : 128] + vadd.i64 q11, q5, q10 + vsub.i64 q2, q2, q9 + vshr.s64 q9, q11, #25 + vext.32 d12, d5, d4, #0 + vand q11, q11, q4 + vadd.i64 q0, q0, q9 + vmov d19, d7 + vadd.i64 q3, q0, q7 + vsub.i64 q5, q5, q11 + vshr.s64 q11, q3, #26 + vext.32 d18, d11, d10, #0 + vand q3, q3, q1 + vadd.i64 q8, q8, q11 + vadd.i64 q11, q8, q10 + vsub.i64 q0, q0, q3 + vshr.s64 q3, q11, #25 + vand q11, q11, q4 + vadd.i64 q3, q6, q3 + vadd.i64 q6, q3, q7 + vsub.i64 q8, q8, q11 + vshr.s64 q11, q6, #26 + vand q6, q6, q1 + vadd.i64 q9, q9, q11 + vadd.i64 d25, d19, d21 + vsub.i64 q3, q3, q6 + vshr.s64 d23, d25, #25 + vand q4, q12, q4 + vadd.i64 d21, d23, d23 + vshl.i64 d25, d23, #4 + vadd.i64 d21, d21, d23 + vadd.i64 d25, d25, d21 + vadd.i64 d4, d4, d25 + vzip.i32 q0, q8 + vadd.i64 d12, d4, d14 + add r2, r6, #8 + vst1.8 d0, [r2, : 64] + vsub.i64 d19, d19, d9 + add r2, r2, #16 + vst1.8 d16, [r2, : 64] + vshr.s64 d22, d12, #26 + vand q0, q6, q1 + vadd.i64 d10, d10, d22 + vzip.i32 q3, q9 + vsub.i64 d4, d4, d0 + sub r2, r2, #8 + vst1.8 d6, [r2, : 64] + add r2, r2, #16 + vst1.8 d18, [r2, : 64] + vzip.i32 q2, q5 + sub r2, r2, #32 + vst1.8 d4, [r2, : 64] + cmp r4, #0 + beq .Lskippostcopy + add r2, r3, #144 + mov r4, r4 + vld1.8 {d0-d1}, [r2, : 128]! + vld1.8 {d2-d3}, [r2, : 128]! + vld1.8 {d4}, [r2, : 64] + vst1.8 {d0-d1}, [r4, : 128]! + vst1.8 {d2-d3}, [r4, : 128]! + vst1.8 d4, [r4, : 64] +.Lskippostcopy: + cmp r1, #1 + bne .Lskipfinalcopy + add r2, r3, #288 + add r4, r3, #144 + vld1.8 {d0-d1}, [r2, : 128]! + vld1.8 {d2-d3}, [r2, : 128]! + vld1.8 {d4}, [r2, : 64] + vst1.8 {d0-d1}, [r4, : 128]! + vst1.8 {d2-d3}, [r4, : 128]! + vst1.8 d4, [r4, : 64] +.Lskipfinalcopy: + add r1, r1, #1 + cmp r1, #12 + blo .Linvertloop + add r1, r3, #144 + ldr r2, [r1], #4 + ldr r3, [r1], #4 + ldr r4, [r1], #4 + ldr r5, [r1], #4 + ldr r6, [r1], #4 + ldr r7, [r1], #4 + ldr r8, [r1], #4 + ldr r9, [r1], #4 + ldr r10, [r1], #4 + ldr r1, [r1] + add r11, r1, r1, LSL #4 + add r11, r11, r1, LSL #1 + add r11, r11, #16777216 + mov r11, r11, ASR #25 + add r11, r11, r2 + mov r11, r11, ASR #26 + add r11, r11, r3 + mov r11, r11, ASR #25 + add r11, r11, r4 + mov r11, r11, ASR #26 + add r11, r11, r5 + mov r11, r11, ASR #25 + add r11, r11, r6 + mov r11, r11, ASR #26 + add r11, r11, r7 + mov r11, r11, ASR #25 + add r11, r11, r8 + mov r11, r11, ASR #26 + add r11, r11, r9 + mov r11, r11, ASR #25 + add r11, r11, r10 + mov r11, r11, ASR #26 + add r11, r11, r1 + mov r11, r11, ASR #25 + add r2, r2, r11 + add r2, r2, r11, LSL #1 + add r2, r2, r11, LSL #4 + mov r11, r2, ASR #26 + add r3, r3, r11 + sub r2, r2, r11, LSL #26 + mov r11, r3, ASR #25 + add r4, r4, r11 + sub r3, r3, r11, LSL #25 + mov r11, r4, ASR #26 + add r5, r5, r11 + sub r4, r4, r11, LSL #26 + mov r11, r5, ASR #25 + add r6, r6, r11 + sub r5, r5, r11, LSL #25 + mov r11, r6, ASR #26 + add r7, r7, r11 + sub r6, r6, r11, LSL #26 + mov r11, r7, ASR #25 + add r8, r8, r11 + sub r7, r7, r11, LSL #25 + mov r11, r8, ASR #26 + add r9, r9, r11 + sub r8, r8, r11, LSL #26 + mov r11, r9, ASR #25 + add r10, r10, r11 + sub r9, r9, r11, LSL #25 + mov r11, r10, ASR #26 + add r1, r1, r11 + sub r10, r10, r11, LSL #26 + mov r11, r1, ASR #25 + sub r1, r1, r11, LSL #25 + add r2, r2, r3, LSL #26 + mov r3, r3, LSR #6 + add r3, r3, r4, LSL #19 + mov r4, r4, LSR #13 + add r4, r4, r5, LSL #13 + mov r5, r5, LSR #19 + add r5, r5, r6, LSL #6 + add r6, r7, r8, LSL #25 + mov r7, r8, LSR #7 + add r7, r7, r9, LSL #19 + mov r8, r9, LSR #13 + add r8, r8, r10, LSL #12 + mov r9, r10, LSR #20 + add r1, r9, r1, LSL #6 + str r2, [r0] + str r3, [r0, #4] + str r4, [r0, #8] + str r5, [r0, #12] + str r6, [r0, #16] + str r7, [r0, #20] + str r8, [r0, #24] + str r1, [r0, #28] + movw r0, #0 + mov sp, ip + pop {r4-r11, pc} +ENDPROC(curve25519_neon) diff --git a/arch/arm/crypto/curve25519-glue.c b/arch/arm/crypto/curve25519-glue.c new file mode 100644 index 000000000000..f3f42cf3b893 --- /dev/null +++ b/arch/arm/crypto/curve25519-glue.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. + * + * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This + * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been + * manually reworked for use in kernel space. + */ + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> +#include <crypto/internal/kpp.h> +#include <crypto/internal/simd.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/jump_label.h> +#include <crypto/curve25519.h> + +asmlinkage void curve25519_neon(u8 mypublic[CURVE25519_KEY_SIZE], + const u8 secret[CURVE25519_KEY_SIZE], + const u8 basepoint[CURVE25519_KEY_SIZE]); + +static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); + +void curve25519_arch(u8 out[CURVE25519_KEY_SIZE], + const u8 scalar[CURVE25519_KEY_SIZE], + const u8 point[CURVE25519_KEY_SIZE]) +{ + if (static_branch_likely(&have_neon) && crypto_simd_usable()) { + kernel_neon_begin(); + curve25519_neon(out, scalar, point); + kernel_neon_end(); + } else { + curve25519_generic(out, scalar, point); + } +} +EXPORT_SYMBOL(curve25519_arch); + +static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf, + unsigned int len) +{ + u8 *secret = kpp_tfm_ctx(tfm); + + if (!len) + curve25519_generate_secret(secret); + else if (len == CURVE25519_KEY_SIZE && + crypto_memneq(buf, curve25519_null_point, CURVE25519_KEY_SIZE)) + memcpy(secret, buf, CURVE25519_KEY_SIZE); + else + return -EINVAL; + return 0; +} + +static int curve25519_compute_value(struct kpp_request *req) +{ + struct crypto_kpp *tfm = crypto_kpp_reqtfm(req); + const u8 *secret = kpp_tfm_ctx(tfm); + u8 public_key[CURVE25519_KEY_SIZE]; + u8 buf[CURVE25519_KEY_SIZE]; + int copied, nbytes; + u8 const *bp; + + if (req->src) { + copied = sg_copy_to_buffer(req->src, + sg_nents_for_len(req->src, + CURVE25519_KEY_SIZE), + public_key, CURVE25519_KEY_SIZE); + if (copied != CURVE25519_KEY_SIZE) + return -EINVAL; + bp = public_key; + } else { + bp = curve25519_base_point; + } + + curve25519_arch(buf, secret, bp); + + /* might want less than we've got */ + nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len); + copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst, + nbytes), + buf, nbytes); + if (copied != nbytes) + return -EINVAL; + return 0; +} + +static unsigned int curve25519_max_size(struct crypto_kpp *tfm) +{ + return CURVE25519_KEY_SIZE; +} + +static struct kpp_alg curve25519_alg = { + .base.cra_name = "curve25519", + .base.cra_driver_name = "curve25519-neon", + .base.cra_priority = 200, + .base.cra_module = THIS_MODULE, + .base.cra_ctxsize = CURVE25519_KEY_SIZE, + + .set_secret = curve25519_set_secret, + .generate_public_key = curve25519_compute_value, + .compute_shared_secret = curve25519_compute_value, + .max_size = curve25519_max_size, +}; + +static int __init mod_init(void) +{ + if (elf_hwcap & HWCAP_NEON) { + static_branch_enable(&have_neon); + return IS_REACHABLE(CONFIG_CRYPTO_KPP) ? + crypto_register_kpp(&curve25519_alg) : 0; + } + return 0; +} + +static void __exit mod_exit(void) +{ + if (IS_REACHABLE(CONFIG_CRYPTO_KPP) && elf_hwcap & HWCAP_NEON) + crypto_unregister_kpp(&curve25519_alg); +} + +module_init(mod_init); +module_exit(mod_exit); + +MODULE_ALIAS_CRYPTO("curve25519"); +MODULE_ALIAS_CRYPTO("curve25519-neon"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/crypto/ghash-ce-core.S b/arch/arm/crypto/ghash-ce-core.S index c47fe81abcb0..534c9647726d 100644 --- a/arch/arm/crypto/ghash-ce-core.S +++ b/arch/arm/crypto/ghash-ce-core.S @@ -88,6 +88,7 @@ T3_H .req d17 .text + .arch armv8-a .fpu crypto-neon-fp-armv8 .macro __pmull_p64, rd, rn, rm, b1, b2, b3, b4 diff --git a/arch/arm/crypto/poly1305-armv4.pl b/arch/arm/crypto/poly1305-armv4.pl new file mode 100644 index 000000000000..6d79498d3115 --- /dev/null +++ b/arch/arm/crypto/poly1305-armv4.pl @@ -0,0 +1,1236 @@ +#!/usr/bin/env perl +# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause +# +# ==================================================================== +# Written by Andy Polyakov, @dot-asm, initially for the OpenSSL +# project. +# ==================================================================== +# +# IALU(*)/gcc-4.4 NEON +# +# ARM11xx(ARMv6) 7.78/+100% - +# Cortex-A5 6.35/+130% 3.00 +# Cortex-A8 6.25/+115% 2.36 +# Cortex-A9 5.10/+95% 2.55 +# Cortex-A15 3.85/+85% 1.25(**) +# Snapdragon S4 5.70/+100% 1.48(**) +# +# (*) this is for -march=armv6, i.e. with bunch of ldrb loading data; +# (**) these are trade-off results, they can be improved by ~8% but at +# the cost of 15/12% regression on Cortex-A5/A7, it's even possible +# to improve Cortex-A9 result, but then A5/A7 loose more than 20%; + +$flavour = shift; +if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; } +else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} } + +if ($flavour && $flavour ne "void") { + $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; + ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or + ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or + die "can't locate arm-xlate.pl"; + + open STDOUT,"| \"$^X\" $xlate $flavour $output"; +} else { + open STDOUT,">$output"; +} + +($ctx,$inp,$len,$padbit)=map("r$_",(0..3)); + +$code.=<<___; +#ifndef __KERNEL__ +# include "arm_arch.h" +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__ +# define poly1305_init poly1305_init_arm +# define poly1305_blocks poly1305_blocks_arm +# define poly1305_emit poly1305_emit_arm +.globl poly1305_blocks_neon +#endif + +#if defined(__thumb2__) +.syntax unified +.thumb +#else +.code 32 +#endif + +.text + +.globl poly1305_emit +.globl poly1305_blocks +.globl poly1305_init +.type poly1305_init,%function +.align 5 +poly1305_init: +.Lpoly1305_init: + stmdb sp!,{r4-r11} + + eor r3,r3,r3 + cmp $inp,#0 + str r3,[$ctx,#0] @ zero hash value + str r3,[$ctx,#4] + str r3,[$ctx,#8] + str r3,[$ctx,#12] + str r3,[$ctx,#16] + str r3,[$ctx,#36] @ clear is_base2_26 + add $ctx,$ctx,#20 + +#ifdef __thumb2__ + it eq +#endif + moveq r0,#0 + beq .Lno_key + +#if __ARM_MAX_ARCH__>=7 + mov r3,#-1 + str r3,[$ctx,#28] @ impossible key power value +# ifndef __KERNEL__ + adr r11,.Lpoly1305_init + ldr r12,.LOPENSSL_armcap +# endif +#endif + ldrb r4,[$inp,#0] + mov r10,#0x0fffffff + ldrb r5,[$inp,#1] + and r3,r10,#-4 @ 0x0ffffffc + ldrb r6,[$inp,#2] + ldrb r7,[$inp,#3] + orr r4,r4,r5,lsl#8 + ldrb r5,[$inp,#4] + orr r4,r4,r6,lsl#16 + ldrb r6,[$inp,#5] + orr r4,r4,r7,lsl#24 + ldrb r7,[$inp,#6] + and r4,r4,r10 + +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +# if !defined(_WIN32) + ldr r12,[r11,r12] @ OPENSSL_armcap_P +# endif +# if defined(__APPLE__) || defined(_WIN32) + ldr r12,[r12] +# endif +#endif + ldrb r8,[$inp,#7] + orr r5,r5,r6,lsl#8 + ldrb r6,[$inp,#8] + orr r5,r5,r7,lsl#16 + ldrb r7,[$inp,#9] + orr r5,r5,r8,lsl#24 + ldrb r8,[$inp,#10] + and r5,r5,r3 + +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + tst r12,#ARMV7_NEON @ check for NEON +# ifdef __thumb2__ + adr r9,.Lpoly1305_blocks_neon + adr r11,.Lpoly1305_blocks + it ne + movne r11,r9 + adr r12,.Lpoly1305_emit + orr r11,r11,#1 @ thumb-ify addresses + orr r12,r12,#1 +# else + add r12,r11,#(.Lpoly1305_emit-.Lpoly1305_init) + ite eq + addeq r11,r11,#(.Lpoly1305_blocks-.Lpoly1305_init) + addne r11,r11,#(.Lpoly1305_blocks_neon-.Lpoly1305_init) +# endif +#endif + ldrb r9,[$inp,#11] + orr r6,r6,r7,lsl#8 + ldrb r7,[$inp,#12] + orr r6,r6,r8,lsl#16 + ldrb r8,[$inp,#13] + orr r6,r6,r9,lsl#24 + ldrb r9,[$inp,#14] + and r6,r6,r3 + + ldrb r10,[$inp,#15] + orr r7,r7,r8,lsl#8 + str r4,[$ctx,#0] + orr r7,r7,r9,lsl#16 + str r5,[$ctx,#4] + orr r7,r7,r10,lsl#24 + str r6,[$ctx,#8] + and r7,r7,r3 + str r7,[$ctx,#12] +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + stmia r2,{r11,r12} @ fill functions table + mov r0,#1 +#else + mov r0,#0 +#endif +.Lno_key: + ldmia sp!,{r4-r11} +#if __ARM_ARCH__>=5 + ret @ bx lr +#else + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +#endif +.size poly1305_init,.-poly1305_init +___ +{ +my ($h0,$h1,$h2,$h3,$h4,$r0,$r1,$r2,$r3)=map("r$_",(4..12)); +my ($s1,$s2,$s3)=($r1,$r2,$r3); + +$code.=<<___; +.type poly1305_blocks,%function +.align 5 +poly1305_blocks: +.Lpoly1305_blocks: + stmdb sp!,{r3-r11,lr} + + ands $len,$len,#-16 + beq .Lno_data + + add $len,$len,$inp @ end pointer + sub sp,sp,#32 + +#if __ARM_ARCH__<7 + ldmia $ctx,{$h0-$r3} @ load context + add $ctx,$ctx,#20 + str $len,[sp,#16] @ offload stuff + str $ctx,[sp,#12] +#else + ldr lr,[$ctx,#36] @ is_base2_26 + ldmia $ctx!,{$h0-$h4} @ load hash value + str $len,[sp,#16] @ offload stuff + str $ctx,[sp,#12] + + adds $r0,$h0,$h1,lsl#26 @ base 2^26 -> base 2^32 + mov $r1,$h1,lsr#6 + adcs $r1,$r1,$h2,lsl#20 + mov $r2,$h2,lsr#12 + adcs $r2,$r2,$h3,lsl#14 + mov $r3,$h3,lsr#18 + adcs $r3,$r3,$h4,lsl#8 + mov $len,#0 + teq lr,#0 + str $len,[$ctx,#16] @ clear is_base2_26 + adc $len,$len,$h4,lsr#24 + + itttt ne + movne $h0,$r0 @ choose between radixes + movne $h1,$r1 + movne $h2,$r2 + movne $h3,$r3 + ldmia $ctx,{$r0-$r3} @ load key + it ne + movne $h4,$len +#endif + + mov lr,$inp + cmp $padbit,#0 + str $r1,[sp,#20] + str $r2,[sp,#24] + str $r3,[sp,#28] + b .Loop + +.align 4 +.Loop: +#if __ARM_ARCH__<7 + ldrb r0,[lr],#16 @ load input +# ifdef __thumb2__ + it hi +# endif + addhi $h4,$h4,#1 @ 1<<128 + ldrb r1,[lr,#-15] + ldrb r2,[lr,#-14] + ldrb r3,[lr,#-13] + orr r1,r0,r1,lsl#8 + ldrb r0,[lr,#-12] + orr r2,r1,r2,lsl#16 + ldrb r1,[lr,#-11] + orr r3,r2,r3,lsl#24 + ldrb r2,[lr,#-10] + adds $h0,$h0,r3 @ accumulate input + + ldrb r3,[lr,#-9] + orr r1,r0,r1,lsl#8 + ldrb r0,[lr,#-8] + orr r2,r1,r2,lsl#16 + ldrb r1,[lr,#-7] + orr r3,r2,r3,lsl#24 + ldrb r2,[lr,#-6] + adcs $h1,$h1,r3 + + ldrb r3,[lr,#-5] + orr r1,r0,r1,lsl#8 + ldrb r0,[lr,#-4] + orr r2,r1,r2,lsl#16 + ldrb r1,[lr,#-3] + orr r3,r2,r3,lsl#24 + ldrb r2,[lr,#-2] + adcs $h2,$h2,r3 + + ldrb r3,[lr,#-1] + orr r1,r0,r1,lsl#8 + str lr,[sp,#8] @ offload input pointer + orr r2,r1,r2,lsl#16 + add $s1,$r1,$r1,lsr#2 + orr r3,r2,r3,lsl#24 +#else + ldr r0,[lr],#16 @ load input + it hi + addhi $h4,$h4,#1 @ padbit + ldr r1,[lr,#-12] + ldr r2,[lr,#-8] + ldr r3,[lr,#-4] +# ifdef __ARMEB__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +# endif + adds $h0,$h0,r0 @ accumulate input + str lr,[sp,#8] @ offload input pointer + adcs $h1,$h1,r1 + add $s1,$r1,$r1,lsr#2 + adcs $h2,$h2,r2 +#endif + add $s2,$r2,$r2,lsr#2 + adcs $h3,$h3,r3 + add $s3,$r3,$r3,lsr#2 + + umull r2,r3,$h1,$r0 + adc $h4,$h4,#0 + umull r0,r1,$h0,$r0 + umlal r2,r3,$h4,$s1 + umlal r0,r1,$h3,$s1 + ldr $r1,[sp,#20] @ reload $r1 + umlal r2,r3,$h2,$s3 + umlal r0,r1,$h1,$s3 + umlal r2,r3,$h3,$s2 + umlal r0,r1,$h2,$s2 + umlal r2,r3,$h0,$r1 + str r0,[sp,#0] @ future $h0 + mul r0,$s2,$h4 + ldr $r2,[sp,#24] @ reload $r2 + adds r2,r2,r1 @ d1+=d0>>32 + eor r1,r1,r1 + adc lr,r3,#0 @ future $h2 + str r2,[sp,#4] @ future $h1 + + mul r2,$s3,$h4 + eor r3,r3,r3 + umlal r0,r1,$h3,$s3 + ldr $r3,[sp,#28] @ reload $r3 + umlal r2,r3,$h3,$r0 + umlal r0,r1,$h2,$r0 + umlal r2,r3,$h2,$r1 + umlal r0,r1,$h1,$r1 + umlal r2,r3,$h1,$r2 + umlal r0,r1,$h0,$r2 + umlal r2,r3,$h0,$r3 + ldr $h0,[sp,#0] + mul $h4,$r0,$h4 + ldr $h1,[sp,#4] + + adds $h2,lr,r0 @ d2+=d1>>32 + ldr lr,[sp,#8] @ reload input pointer + adc r1,r1,#0 + adds $h3,r2,r1 @ d3+=d2>>32 + ldr r0,[sp,#16] @ reload end pointer + adc r3,r3,#0 + add $h4,$h4,r3 @ h4+=d3>>32 + + and r1,$h4,#-4 + and $h4,$h4,#3 + add r1,r1,r1,lsr#2 @ *=5 + adds $h0,$h0,r1 + adcs $h1,$h1,#0 + adcs $h2,$h2,#0 + adcs $h3,$h3,#0 + adc $h4,$h4,#0 + + cmp r0,lr @ done yet? + bhi .Loop + + ldr $ctx,[sp,#12] + add sp,sp,#32 + stmdb $ctx,{$h0-$h4} @ store the result + +.Lno_data: +#if __ARM_ARCH__>=5 + ldmia sp!,{r3-r11,pc} +#else + ldmia sp!,{r3-r11,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +#endif +.size poly1305_blocks,.-poly1305_blocks +___ +} +{ +my ($ctx,$mac,$nonce)=map("r$_",(0..2)); +my ($h0,$h1,$h2,$h3,$h4,$g0,$g1,$g2,$g3)=map("r$_",(3..11)); +my $g4=$ctx; + +$code.=<<___; +.type poly1305_emit,%function +.align 5 +poly1305_emit: +.Lpoly1305_emit: + stmdb sp!,{r4-r11} + + ldmia $ctx,{$h0-$h4} + +#if __ARM_ARCH__>=7 + ldr ip,[$ctx,#36] @ is_base2_26 + + adds $g0,$h0,$h1,lsl#26 @ base 2^26 -> base 2^32 + mov $g1,$h1,lsr#6 + adcs $g1,$g1,$h2,lsl#20 + mov $g2,$h2,lsr#12 + adcs $g2,$g2,$h3,lsl#14 + mov $g3,$h3,lsr#18 + adcs $g3,$g3,$h4,lsl#8 + mov $g4,#0 + adc $g4,$g4,$h4,lsr#24 + + tst ip,ip + itttt ne + movne $h0,$g0 + movne $h1,$g1 + movne $h2,$g2 + movne $h3,$g3 + it ne + movne $h4,$g4 +#endif + + adds $g0,$h0,#5 @ compare to modulus + adcs $g1,$h1,#0 + adcs $g2,$h2,#0 + adcs $g3,$h3,#0 + adc $g4,$h4,#0 + tst $g4,#4 @ did it carry/borrow? + +#ifdef __thumb2__ + it ne +#endif + movne $h0,$g0 + ldr $g0,[$nonce,#0] +#ifdef __thumb2__ + it ne +#endif + movne $h1,$g1 + ldr $g1,[$nonce,#4] +#ifdef __thumb2__ + it ne +#endif + movne $h2,$g2 + ldr $g2,[$nonce,#8] +#ifdef __thumb2__ + it ne +#endif + movne $h3,$g3 + ldr $g3,[$nonce,#12] + + adds $h0,$h0,$g0 + adcs $h1,$h1,$g1 + adcs $h2,$h2,$g2 + adc $h3,$h3,$g3 + +#if __ARM_ARCH__>=7 +# ifdef __ARMEB__ + rev $h0,$h0 + rev $h1,$h1 + rev $h2,$h2 + rev $h3,$h3 +# endif + str $h0,[$mac,#0] + str $h1,[$mac,#4] + str $h2,[$mac,#8] + str $h3,[$mac,#12] +#else + strb $h0,[$mac,#0] + mov $h0,$h0,lsr#8 + strb $h1,[$mac,#4] + mov $h1,$h1,lsr#8 + strb $h2,[$mac,#8] + mov $h2,$h2,lsr#8 + strb $h3,[$mac,#12] + mov $h3,$h3,lsr#8 + + strb $h0,[$mac,#1] + mov $h0,$h0,lsr#8 + strb $h1,[$mac,#5] + mov $h1,$h1,lsr#8 + strb $h2,[$mac,#9] + mov $h2,$h2,lsr#8 + strb $h3,[$mac,#13] + mov $h3,$h3,lsr#8 + + strb $h0,[$mac,#2] + mov $h0,$h0,lsr#8 + strb $h1,[$mac,#6] + mov $h1,$h1,lsr#8 + strb $h2,[$mac,#10] + mov $h2,$h2,lsr#8 + strb $h3,[$mac,#14] + mov $h3,$h3,lsr#8 + + strb $h0,[$mac,#3] + strb $h1,[$mac,#7] + strb $h2,[$mac,#11] + strb $h3,[$mac,#15] +#endif + ldmia sp!,{r4-r11} +#if __ARM_ARCH__>=5 + ret @ bx lr +#else + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +#endif +.size poly1305_emit,.-poly1305_emit +___ +{ +my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("d$_",(0..9)); +my ($D0,$D1,$D2,$D3,$D4, $H0,$H1,$H2,$H3,$H4) = map("q$_",(5..14)); +my ($T0,$T1,$MASK) = map("q$_",(15,4,0)); + +my ($in2,$zeros,$tbl0,$tbl1) = map("r$_",(4..7)); + +$code.=<<___; +#if __ARM_MAX_ARCH__>=7 +.fpu neon + +.type poly1305_init_neon,%function +.align 5 +poly1305_init_neon: +.Lpoly1305_init_neon: + ldr r3,[$ctx,#48] @ first table element + cmp r3,#-1 @ is value impossible? + bne .Lno_init_neon + + ldr r4,[$ctx,#20] @ load key base 2^32 + ldr r5,[$ctx,#24] + ldr r6,[$ctx,#28] + ldr r7,[$ctx,#32] + + and r2,r4,#0x03ffffff @ base 2^32 -> base 2^26 + mov r3,r4,lsr#26 + mov r4,r5,lsr#20 + orr r3,r3,r5,lsl#6 + mov r5,r6,lsr#14 + orr r4,r4,r6,lsl#12 + mov r6,r7,lsr#8 + orr r5,r5,r7,lsl#18 + and r3,r3,#0x03ffffff + and r4,r4,#0x03ffffff + and r5,r5,#0x03ffffff + + vdup.32 $R0,r2 @ r^1 in both lanes + add r2,r3,r3,lsl#2 @ *5 + vdup.32 $R1,r3 + add r3,r4,r4,lsl#2 + vdup.32 $S1,r2 + vdup.32 $R2,r4 + add r4,r5,r5,lsl#2 + vdup.32 $S2,r3 + vdup.32 $R3,r5 + add r5,r6,r6,lsl#2 + vdup.32 $S3,r4 + vdup.32 $R4,r6 + vdup.32 $S4,r5 + + mov $zeros,#2 @ counter + +.Lsquare_neon: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4 + @ d1 = h1*r0 + h0*r1 + h4*5*r2 + h3*5*r3 + h2*5*r4 + @ d2 = h2*r0 + h1*r1 + h0*r2 + h4*5*r3 + h3*5*r4 + @ d3 = h3*r0 + h2*r1 + h1*r2 + h0*r3 + h4*5*r4 + @ d4 = h4*r0 + h3*r1 + h2*r2 + h1*r3 + h0*r4 + + vmull.u32 $D0,$R0,${R0}[1] + vmull.u32 $D1,$R1,${R0}[1] + vmull.u32 $D2,$R2,${R0}[1] + vmull.u32 $D3,$R3,${R0}[1] + vmull.u32 $D4,$R4,${R0}[1] + + vmlal.u32 $D0,$R4,${S1}[1] + vmlal.u32 $D1,$R0,${R1}[1] + vmlal.u32 $D2,$R1,${R1}[1] + vmlal.u32 $D3,$R2,${R1}[1] + vmlal.u32 $D4,$R3,${R1}[1] + + vmlal.u32 $D0,$R3,${S2}[1] + vmlal.u32 $D1,$R4,${S2}[1] + vmlal.u32 $D3,$R1,${R2}[1] + vmlal.u32 $D2,$R0,${R2}[1] + vmlal.u32 $D4,$R2,${R2}[1] + + vmlal.u32 $D0,$R2,${S3}[1] + vmlal.u32 $D3,$R0,${R3}[1] + vmlal.u32 $D1,$R3,${S3}[1] + vmlal.u32 $D2,$R4,${S3}[1] + vmlal.u32 $D4,$R1,${R3}[1] + + vmlal.u32 $D3,$R4,${S4}[1] + vmlal.u32 $D0,$R1,${S4}[1] + vmlal.u32 $D1,$R2,${S4}[1] + vmlal.u32 $D2,$R3,${S4}[1] + vmlal.u32 $D4,$R0,${R4}[1] + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ lazy reduction as discussed in "NEON crypto" by D.J. Bernstein + @ and P. Schwabe + @ + @ H0>>+H1>>+H2>>+H3>>+H4 + @ H3>>+H4>>*5+H0>>+H1 + @ + @ Trivia. + @ + @ Result of multiplication of n-bit number by m-bit number is + @ n+m bits wide. However! Even though 2^n is a n+1-bit number, + @ m-bit number multiplied by 2^n is still n+m bits wide. + @ + @ Sum of two n-bit numbers is n+1 bits wide, sum of three - n+2, + @ and so is sum of four. Sum of 2^m n-m-bit numbers and n-bit + @ one is n+1 bits wide. + @ + @ >>+ denotes Hnext += Hn>>26, Hn &= 0x3ffffff. This means that + @ H0, H2, H3 are guaranteed to be 26 bits wide, while H1 and H4 + @ can be 27. However! In cases when their width exceeds 26 bits + @ they are limited by 2^26+2^6. This in turn means that *sum* + @ of the products with these values can still be viewed as sum + @ of 52-bit numbers as long as the amount of addends is not a + @ power of 2. For example, + @ + @ H4 = H4*R0 + H3*R1 + H2*R2 + H1*R3 + H0 * R4, + @ + @ which can't be larger than 5 * (2^26 + 2^6) * (2^26 + 2^6), or + @ 5 * (2^52 + 2*2^32 + 2^12), which in turn is smaller than + @ 8 * (2^52) or 2^55. However, the value is then multiplied by + @ by 5, so we should be looking at 5 * 5 * (2^52 + 2^33 + 2^12), + @ which is less than 32 * (2^52) or 2^57. And when processing + @ data we are looking at triple as many addends... + @ + @ In key setup procedure pre-reduced H0 is limited by 5*4+1 and + @ 5*H4 - by 5*5 52-bit addends, or 57 bits. But when hashing the + @ input H0 is limited by (5*4+1)*3 addends, or 58 bits, while + @ 5*H4 by 5*5*3, or 59[!] bits. How is this relevant? vmlal.u32 + @ instruction accepts 2x32-bit input and writes 2x64-bit result. + @ This means that result of reduction have to be compressed upon + @ loop wrap-around. This can be done in the process of reduction + @ to minimize amount of instructions [as well as amount of + @ 128-bit instructions, which benefits low-end processors], but + @ one has to watch for H2 (which is narrower than H0) and 5*H4 + @ not being wider than 58 bits, so that result of right shift + @ by 26 bits fits in 32 bits. This is also useful on x86, + @ because it allows to use paddd in place for paddq, which + @ benefits Atom, where paddq is ridiculously slow. + + vshr.u64 $T0,$D3,#26 + vmovn.i64 $D3#lo,$D3 + vshr.u64 $T1,$D0,#26 + vmovn.i64 $D0#lo,$D0 + vadd.i64 $D4,$D4,$T0 @ h3 -> h4 + vbic.i32 $D3#lo,#0xfc000000 @ &=0x03ffffff + vadd.i64 $D1,$D1,$T1 @ h0 -> h1 + vbic.i32 $D0#lo,#0xfc000000 + + vshrn.u64 $T0#lo,$D4,#26 + vmovn.i64 $D4#lo,$D4 + vshr.u64 $T1,$D1,#26 + vmovn.i64 $D1#lo,$D1 + vadd.i64 $D2,$D2,$T1 @ h1 -> h2 + vbic.i32 $D4#lo,#0xfc000000 + vbic.i32 $D1#lo,#0xfc000000 + + vadd.i32 $D0#lo,$D0#lo,$T0#lo + vshl.u32 $T0#lo,$T0#lo,#2 + vshrn.u64 $T1#lo,$D2,#26 + vmovn.i64 $D2#lo,$D2 + vadd.i32 $D0#lo,$D0#lo,$T0#lo @ h4 -> h0 + vadd.i32 $D3#lo,$D3#lo,$T1#lo @ h2 -> h3 + vbic.i32 $D2#lo,#0xfc000000 + + vshr.u32 $T0#lo,$D0#lo,#26 + vbic.i32 $D0#lo,#0xfc000000 + vshr.u32 $T1#lo,$D3#lo,#26 + vbic.i32 $D3#lo,#0xfc000000 + vadd.i32 $D1#lo,$D1#lo,$T0#lo @ h0 -> h1 + vadd.i32 $D4#lo,$D4#lo,$T1#lo @ h3 -> h4 + + subs $zeros,$zeros,#1 + beq .Lsquare_break_neon + + add $tbl0,$ctx,#(48+0*9*4) + add $tbl1,$ctx,#(48+1*9*4) + + vtrn.32 $R0,$D0#lo @ r^2:r^1 + vtrn.32 $R2,$D2#lo + vtrn.32 $R3,$D3#lo + vtrn.32 $R1,$D1#lo + vtrn.32 $R4,$D4#lo + + vshl.u32 $S2,$R2,#2 @ *5 + vshl.u32 $S3,$R3,#2 + vshl.u32 $S1,$R1,#2 + vshl.u32 $S4,$R4,#2 + vadd.i32 $S2,$S2,$R2 + vadd.i32 $S1,$S1,$R1 + vadd.i32 $S3,$S3,$R3 + vadd.i32 $S4,$S4,$R4 + + vst4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]! + vst4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]! + vst4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]! + vst4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]! + vst1.32 {${S4}[0]},[$tbl0,:32] + vst1.32 {${S4}[1]},[$tbl1,:32] + + b .Lsquare_neon + +.align 4 +.Lsquare_break_neon: + add $tbl0,$ctx,#(48+2*4*9) + add $tbl1,$ctx,#(48+3*4*9) + + vmov $R0,$D0#lo @ r^4:r^3 + vshl.u32 $S1,$D1#lo,#2 @ *5 + vmov $R1,$D1#lo + vshl.u32 $S2,$D2#lo,#2 + vmov $R2,$D2#lo + vshl.u32 $S3,$D3#lo,#2 + vmov $R3,$D3#lo + vshl.u32 $S4,$D4#lo,#2 + vmov $R4,$D4#lo + vadd.i32 $S1,$S1,$D1#lo + vadd.i32 $S2,$S2,$D2#lo + vadd.i32 $S3,$S3,$D3#lo + vadd.i32 $S4,$S4,$D4#lo + + vst4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]! + vst4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]! + vst4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]! + vst4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]! + vst1.32 {${S4}[0]},[$tbl0] + vst1.32 {${S4}[1]},[$tbl1] + +.Lno_init_neon: + ret @ bx lr +.size poly1305_init_neon,.-poly1305_init_neon + +.type poly1305_blocks_neon,%function +.align 5 +poly1305_blocks_neon: +.Lpoly1305_blocks_neon: + ldr ip,[$ctx,#36] @ is_base2_26 + + cmp $len,#64 + blo .Lpoly1305_blocks + + stmdb sp!,{r4-r7} + vstmdb sp!,{d8-d15} @ ABI specification says so + + tst ip,ip @ is_base2_26? + bne .Lbase2_26_neon + + stmdb sp!,{r1-r3,lr} + bl .Lpoly1305_init_neon + + ldr r4,[$ctx,#0] @ load hash value base 2^32 + ldr r5,[$ctx,#4] + ldr r6,[$ctx,#8] + ldr r7,[$ctx,#12] + ldr ip,[$ctx,#16] + + and r2,r4,#0x03ffffff @ base 2^32 -> base 2^26 + mov r3,r4,lsr#26 + veor $D0#lo,$D0#lo,$D0#lo + mov r4,r5,lsr#20 + orr r3,r3,r5,lsl#6 + veor $D1#lo,$D1#lo,$D1#lo + mov r5,r6,lsr#14 + orr r4,r4,r6,lsl#12 + veor $D2#lo,$D2#lo,$D2#lo + mov r6,r7,lsr#8 + orr r5,r5,r7,lsl#18 + veor $D3#lo,$D3#lo,$D3#lo + and r3,r3,#0x03ffffff + orr r6,r6,ip,lsl#24 + veor $D4#lo,$D4#lo,$D4#lo + and r4,r4,#0x03ffffff + mov r1,#1 + and r5,r5,#0x03ffffff + str r1,[$ctx,#36] @ set is_base2_26 + + vmov.32 $D0#lo[0],r2 + vmov.32 $D1#lo[0],r3 + vmov.32 $D2#lo[0],r4 + vmov.32 $D3#lo[0],r5 + vmov.32 $D4#lo[0],r6 + adr $zeros,.Lzeros + + ldmia sp!,{r1-r3,lr} + b .Lhash_loaded + +.align 4 +.Lbase2_26_neon: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ load hash value + + veor $D0#lo,$D0#lo,$D0#lo + veor $D1#lo,$D1#lo,$D1#lo + veor $D2#lo,$D2#lo,$D2#lo + veor $D3#lo,$D3#lo,$D3#lo + veor $D4#lo,$D4#lo,$D4#lo + vld4.32 {$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]! + adr $zeros,.Lzeros + vld1.32 {$D4#lo[0]},[$ctx] + sub $ctx,$ctx,#16 @ rewind + +.Lhash_loaded: + add $in2,$inp,#32 + mov $padbit,$padbit,lsl#24 + tst $len,#31 + beq .Leven + + vld4.32 {$H0#lo[0],$H1#lo[0],$H2#lo[0],$H3#lo[0]},[$inp]! + vmov.32 $H4#lo[0],$padbit + sub $len,$len,#16 + add $in2,$inp,#32 + +# ifdef __ARMEB__ + vrev32.8 $H0,$H0 + vrev32.8 $H3,$H3 + vrev32.8 $H1,$H1 + vrev32.8 $H2,$H2 +# endif + vsri.u32 $H4#lo,$H3#lo,#8 @ base 2^32 -> base 2^26 + vshl.u32 $H3#lo,$H3#lo,#18 + + vsri.u32 $H3#lo,$H2#lo,#14 + vshl.u32 $H2#lo,$H2#lo,#12 + vadd.i32 $H4#hi,$H4#lo,$D4#lo @ add hash value and move to #hi + + vbic.i32 $H3#lo,#0xfc000000 + vsri.u32 $H2#lo,$H1#lo,#20 + vshl.u32 $H1#lo,$H1#lo,#6 + + vbic.i32 $H2#lo,#0xfc000000 + vsri.u32 $H1#lo,$H0#lo,#26 + vadd.i32 $H3#hi,$H3#lo,$D3#lo + + vbic.i32 $H0#lo,#0xfc000000 + vbic.i32 $H1#lo,#0xfc000000 + vadd.i32 $H2#hi,$H2#lo,$D2#lo + + vadd.i32 $H0#hi,$H0#lo,$D0#lo + vadd.i32 $H1#hi,$H1#lo,$D1#lo + + mov $tbl1,$zeros + add $tbl0,$ctx,#48 + + cmp $len,$len + b .Long_tail + +.align 4 +.Leven: + subs $len,$len,#64 + it lo + movlo $in2,$zeros + + vmov.i32 $H4,#1<<24 @ padbit, yes, always + vld4.32 {$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp] @ inp[0:1] + add $inp,$inp,#64 + vld4.32 {$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2] @ inp[2:3] (or 0) + add $in2,$in2,#64 + itt hi + addhi $tbl1,$ctx,#(48+1*9*4) + addhi $tbl0,$ctx,#(48+3*9*4) + +# ifdef __ARMEB__ + vrev32.8 $H0,$H0 + vrev32.8 $H3,$H3 + vrev32.8 $H1,$H1 + vrev32.8 $H2,$H2 +# endif + vsri.u32 $H4,$H3,#8 @ base 2^32 -> base 2^26 + vshl.u32 $H3,$H3,#18 + + vsri.u32 $H3,$H2,#14 + vshl.u32 $H2,$H2,#12 + + vbic.i32 $H3,#0xfc000000 + vsri.u32 $H2,$H1,#20 + vshl.u32 $H1,$H1,#6 + + vbic.i32 $H2,#0xfc000000 + vsri.u32 $H1,$H0,#26 + + vbic.i32 $H0,#0xfc000000 + vbic.i32 $H1,#0xfc000000 + + bls .Lskip_loop + + vld4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]! @ load r^2 + vld4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]! @ load r^4 + vld4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]! + vld4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]! + b .Loop_neon + +.align 5 +.Loop_neon: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2 + @ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r + @ \___________________/ + @ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2 + @ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r + @ \___________________/ \____________________/ + @ + @ Note that we start with inp[2:3]*r^2. This is because it + @ doesn't depend on reduction in previous iteration. + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ d4 = h4*r0 + h3*r1 + h2*r2 + h1*r3 + h0*r4 + @ d3 = h3*r0 + h2*r1 + h1*r2 + h0*r3 + h4*5*r4 + @ d2 = h2*r0 + h1*r1 + h0*r2 + h4*5*r3 + h3*5*r4 + @ d1 = h1*r0 + h0*r1 + h4*5*r2 + h3*5*r3 + h2*5*r4 + @ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4 + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ inp[2:3]*r^2 + + vadd.i32 $H2#lo,$H2#lo,$D2#lo @ accumulate inp[0:1] + vmull.u32 $D2,$H2#hi,${R0}[1] + vadd.i32 $H0#lo,$H0#lo,$D0#lo + vmull.u32 $D0,$H0#hi,${R0}[1] + vadd.i32 $H3#lo,$H3#lo,$D3#lo + vmull.u32 $D3,$H3#hi,${R0}[1] + vmlal.u32 $D2,$H1#hi,${R1}[1] + vadd.i32 $H1#lo,$H1#lo,$D1#lo + vmull.u32 $D1,$H1#hi,${R0}[1] + + vadd.i32 $H4#lo,$H4#lo,$D4#lo + vmull.u32 $D4,$H4#hi,${R0}[1] + subs $len,$len,#64 + vmlal.u32 $D0,$H4#hi,${S1}[1] + it lo + movlo $in2,$zeros + vmlal.u32 $D3,$H2#hi,${R1}[1] + vld1.32 ${S4}[1],[$tbl1,:32] + vmlal.u32 $D1,$H0#hi,${R1}[1] + vmlal.u32 $D4,$H3#hi,${R1}[1] + + vmlal.u32 $D0,$H3#hi,${S2}[1] + vmlal.u32 $D3,$H1#hi,${R2}[1] + vmlal.u32 $D4,$H2#hi,${R2}[1] + vmlal.u32 $D1,$H4#hi,${S2}[1] + vmlal.u32 $D2,$H0#hi,${R2}[1] + + vmlal.u32 $D3,$H0#hi,${R3}[1] + vmlal.u32 $D0,$H2#hi,${S3}[1] + vmlal.u32 $D4,$H1#hi,${R3}[1] + vmlal.u32 $D1,$H3#hi,${S3}[1] + vmlal.u32 $D2,$H4#hi,${S3}[1] + + vmlal.u32 $D3,$H4#hi,${S4}[1] + vmlal.u32 $D0,$H1#hi,${S4}[1] + vmlal.u32 $D4,$H0#hi,${R4}[1] + vmlal.u32 $D1,$H2#hi,${S4}[1] + vmlal.u32 $D2,$H3#hi,${S4}[1] + + vld4.32 {$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2] @ inp[2:3] (or 0) + add $in2,$in2,#64 + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ (hash+inp[0:1])*r^4 and accumulate + + vmlal.u32 $D3,$H3#lo,${R0}[0] + vmlal.u32 $D0,$H0#lo,${R0}[0] + vmlal.u32 $D4,$H4#lo,${R0}[0] + vmlal.u32 $D1,$H1#lo,${R0}[0] + vmlal.u32 $D2,$H2#lo,${R0}[0] + vld1.32 ${S4}[0],[$tbl0,:32] + + vmlal.u32 $D3,$H2#lo,${R1}[0] + vmlal.u32 $D0,$H4#lo,${S1}[0] + vmlal.u32 $D4,$H3#lo,${R1}[0] + vmlal.u32 $D1,$H0#lo,${R1}[0] + vmlal.u32 $D2,$H1#lo,${R1}[0] + + vmlal.u32 $D3,$H1#lo,${R2}[0] + vmlal.u32 $D0,$H3#lo,${S2}[0] + vmlal.u32 $D4,$H2#lo,${R2}[0] + vmlal.u32 $D1,$H4#lo,${S2}[0] + vmlal.u32 $D2,$H0#lo,${R2}[0] + + vmlal.u32 $D3,$H0#lo,${R3}[0] + vmlal.u32 $D0,$H2#lo,${S3}[0] + vmlal.u32 $D4,$H1#lo,${R3}[0] + vmlal.u32 $D1,$H3#lo,${S3}[0] + vmlal.u32 $D3,$H4#lo,${S4}[0] + + vmlal.u32 $D2,$H4#lo,${S3}[0] + vmlal.u32 $D0,$H1#lo,${S4}[0] + vmlal.u32 $D4,$H0#lo,${R4}[0] + vmov.i32 $H4,#1<<24 @ padbit, yes, always + vmlal.u32 $D1,$H2#lo,${S4}[0] + vmlal.u32 $D2,$H3#lo,${S4}[0] + + vld4.32 {$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp] @ inp[0:1] + add $inp,$inp,#64 +# ifdef __ARMEB__ + vrev32.8 $H0,$H0 + vrev32.8 $H1,$H1 + vrev32.8 $H2,$H2 + vrev32.8 $H3,$H3 +# endif + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ lazy reduction interleaved with base 2^32 -> base 2^26 of + @ inp[0:3] previously loaded to $H0-$H3 and smashed to $H0-$H4. + + vshr.u64 $T0,$D3,#26 + vmovn.i64 $D3#lo,$D3 + vshr.u64 $T1,$D0,#26 + vmovn.i64 $D0#lo,$D0 + vadd.i64 $D4,$D4,$T0 @ h3 -> h4 + vbic.i32 $D3#lo,#0xfc000000 + vsri.u32 $H4,$H3,#8 @ base 2^32 -> base 2^26 + vadd.i64 $D1,$D1,$T1 @ h0 -> h1 + vshl.u32 $H3,$H3,#18 + vbic.i32 $D0#lo,#0xfc000000 + + vshrn.u64 $T0#lo,$D4,#26 + vmovn.i64 $D4#lo,$D4 + vshr.u64 $T1,$D1,#26 + vmovn.i64 $D1#lo,$D1 + vadd.i64 $D2,$D2,$T1 @ h1 -> h2 + vsri.u32 $H3,$H2,#14 + vbic.i32 $D4#lo,#0xfc000000 + vshl.u32 $H2,$H2,#12 + vbic.i32 $D1#lo,#0xfc000000 + + vadd.i32 $D0#lo,$D0#lo,$T0#lo + vshl.u32 $T0#lo,$T0#lo,#2 + vbic.i32 $H3,#0xfc000000 + vshrn.u64 $T1#lo,$D2,#26 + vmovn.i64 $D2#lo,$D2 + vaddl.u32 $D0,$D0#lo,$T0#lo @ h4 -> h0 [widen for a sec] + vsri.u32 $H2,$H1,#20 + vadd.i32 $D3#lo,$D3#lo,$T1#lo @ h2 -> h3 + vshl.u32 $H1,$H1,#6 + vbic.i32 $D2#lo,#0xfc000000 + vbic.i32 $H2,#0xfc000000 + + vshrn.u64 $T0#lo,$D0,#26 @ re-narrow + vmovn.i64 $D0#lo,$D0 + vsri.u32 $H1,$H0,#26 + vbic.i32 $H0,#0xfc000000 + vshr.u32 $T1#lo,$D3#lo,#26 + vbic.i32 $D3#lo,#0xfc000000 + vbic.i32 $D0#lo,#0xfc000000 + vadd.i32 $D1#lo,$D1#lo,$T0#lo @ h0 -> h1 + vadd.i32 $D4#lo,$D4#lo,$T1#lo @ h3 -> h4 + vbic.i32 $H1,#0xfc000000 + + bhi .Loop_neon + +.Lskip_loop: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1 + + add $tbl1,$ctx,#(48+0*9*4) + add $tbl0,$ctx,#(48+1*9*4) + adds $len,$len,#32 + it ne + movne $len,#0 + bne .Long_tail + + vadd.i32 $H2#hi,$H2#lo,$D2#lo @ add hash value and move to #hi + vadd.i32 $H0#hi,$H0#lo,$D0#lo + vadd.i32 $H3#hi,$H3#lo,$D3#lo + vadd.i32 $H1#hi,$H1#lo,$D1#lo + vadd.i32 $H4#hi,$H4#lo,$D4#lo + +.Long_tail: + vld4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]! @ load r^1 + vld4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]! @ load r^2 + + vadd.i32 $H2#lo,$H2#lo,$D2#lo @ can be redundant + vmull.u32 $D2,$H2#hi,$R0 + vadd.i32 $H0#lo,$H0#lo,$D0#lo + vmull.u32 $D0,$H0#hi,$R0 + vadd.i32 $H3#lo,$H3#lo,$D3#lo + vmull.u32 $D3,$H3#hi,$R0 + vadd.i32 $H1#lo,$H1#lo,$D1#lo + vmull.u32 $D1,$H1#hi,$R0 + vadd.i32 $H4#lo,$H4#lo,$D4#lo + vmull.u32 $D4,$H4#hi,$R0 + + vmlal.u32 $D0,$H4#hi,$S1 + vld4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]! + vmlal.u32 $D3,$H2#hi,$R1 + vld4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]! + vmlal.u32 $D1,$H0#hi,$R1 + vmlal.u32 $D4,$H3#hi,$R1 + vmlal.u32 $D2,$H1#hi,$R1 + + vmlal.u32 $D3,$H1#hi,$R2 + vld1.32 ${S4}[1],[$tbl1,:32] + vmlal.u32 $D0,$H3#hi,$S2 + vld1.32 ${S4}[0],[$tbl0,:32] + vmlal.u32 $D4,$H2#hi,$R2 + vmlal.u32 $D1,$H4#hi,$S2 + vmlal.u32 $D2,$H0#hi,$R2 + + vmlal.u32 $D3,$H0#hi,$R3 + it ne + addne $tbl1,$ctx,#(48+2*9*4) + vmlal.u32 $D0,$H2#hi,$S3 + it ne + addne $tbl0,$ctx,#(48+3*9*4) + vmlal.u32 $D4,$H1#hi,$R3 + vmlal.u32 $D1,$H3#hi,$S3 + vmlal.u32 $D2,$H4#hi,$S3 + + vmlal.u32 $D3,$H4#hi,$S4 + vorn $MASK,$MASK,$MASK @ all-ones, can be redundant + vmlal.u32 $D0,$H1#hi,$S4 + vshr.u64 $MASK,$MASK,#38 + vmlal.u32 $D4,$H0#hi,$R4 + vmlal.u32 $D1,$H2#hi,$S4 + vmlal.u32 $D2,$H3#hi,$S4 + + beq .Lshort_tail + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ (hash+inp[0:1])*r^4:r^3 and accumulate + + vld4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]! @ load r^3 + vld4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]! @ load r^4 + + vmlal.u32 $D2,$H2#lo,$R0 + vmlal.u32 $D0,$H0#lo,$R0 + vmlal.u32 $D3,$H3#lo,$R0 + vmlal.u32 $D1,$H1#lo,$R0 + vmlal.u32 $D4,$H4#lo,$R0 + + vmlal.u32 $D0,$H4#lo,$S1 + vld4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]! + vmlal.u32 $D3,$H2#lo,$R1 + vld4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]! + vmlal.u32 $D1,$H0#lo,$R1 + vmlal.u32 $D4,$H3#lo,$R1 + vmlal.u32 $D2,$H1#lo,$R1 + + vmlal.u32 $D3,$H1#lo,$R2 + vld1.32 ${S4}[1],[$tbl1,:32] + vmlal.u32 $D0,$H3#lo,$S2 + vld1.32 ${S4}[0],[$tbl0,:32] + vmlal.u32 $D4,$H2#lo,$R2 + vmlal.u32 $D1,$H4#lo,$S2 + vmlal.u32 $D2,$H0#lo,$R2 + + vmlal.u32 $D3,$H0#lo,$R3 + vmlal.u32 $D0,$H2#lo,$S3 + vmlal.u32 $D4,$H1#lo,$R3 + vmlal.u32 $D1,$H3#lo,$S3 + vmlal.u32 $D2,$H4#lo,$S3 + + vmlal.u32 $D3,$H4#lo,$S4 + vorn $MASK,$MASK,$MASK @ all-ones + vmlal.u32 $D0,$H1#lo,$S4 + vshr.u64 $MASK,$MASK,#38 + vmlal.u32 $D4,$H0#lo,$R4 + vmlal.u32 $D1,$H2#lo,$S4 + vmlal.u32 $D2,$H3#lo,$S4 + +.Lshort_tail: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ horizontal addition + + vadd.i64 $D3#lo,$D3#lo,$D3#hi + vadd.i64 $D0#lo,$D0#lo,$D0#hi + vadd.i64 $D4#lo,$D4#lo,$D4#hi + vadd.i64 $D1#lo,$D1#lo,$D1#hi + vadd.i64 $D2#lo,$D2#lo,$D2#hi + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ lazy reduction, but without narrowing + + vshr.u64 $T0,$D3,#26 + vand.i64 $D3,$D3,$MASK + vshr.u64 $T1,$D0,#26 + vand.i64 $D0,$D0,$MASK + vadd.i64 $D4,$D4,$T0 @ h3 -> h4 + vadd.i64 $D1,$D1,$T1 @ h0 -> h1 + + vshr.u64 $T0,$D4,#26 + vand.i64 $D4,$D4,$MASK + vshr.u64 $T1,$D1,#26 + vand.i64 $D1,$D1,$MASK + vadd.i64 $D2,$D2,$T1 @ h1 -> h2 + + vadd.i64 $D0,$D0,$T0 + vshl.u64 $T0,$T0,#2 + vshr.u64 $T1,$D2,#26 + vand.i64 $D2,$D2,$MASK + vadd.i64 $D0,$D0,$T0 @ h4 -> h0 + vadd.i64 $D3,$D3,$T1 @ h2 -> h3 + + vshr.u64 $T0,$D0,#26 + vand.i64 $D0,$D0,$MASK + vshr.u64 $T1,$D3,#26 + vand.i64 $D3,$D3,$MASK + vadd.i64 $D1,$D1,$T0 @ h0 -> h1 + vadd.i64 $D4,$D4,$T1 @ h3 -> h4 + + cmp $len,#0 + bne .Leven + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ store hash value + + vst4.32 {$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]! + vst1.32 {$D4#lo[0]},[$ctx] + + vldmia sp!,{d8-d15} @ epilogue + ldmia sp!,{r4-r7} + ret @ bx lr +.size poly1305_blocks_neon,.-poly1305_blocks_neon + +.align 5 +.Lzeros: +.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 +#ifndef __KERNEL__ +.LOPENSSL_armcap: +# ifdef _WIN32 +.word OPENSSL_armcap_P +# else +.word OPENSSL_armcap_P-.Lpoly1305_init +# endif +.comm OPENSSL_armcap_P,4,4 +.hidden OPENSSL_armcap_P +#endif +#endif +___ +} } +$code.=<<___; +.asciz "Poly1305 for ARMv4/NEON, CRYPTOGAMS by \@dot-asm" +.align 2 +___ + +foreach (split("\n",$code)) { + s/\`([^\`]*)\`/eval $1/geo; + + s/\bq([0-9]+)#(lo|hi)/sprintf "d%d",2*$1+($2 eq "hi")/geo or + s/\bret\b/bx lr/go or + s/\bbx\s+lr\b/.word\t0xe12fff1e/go; # make it possible to compile with -march=armv4 + + print $_,"\n"; +} +close STDOUT; # enforce flush diff --git a/arch/arm/crypto/poly1305-core.S_shipped b/arch/arm/crypto/poly1305-core.S_shipped new file mode 100644 index 000000000000..37b71d990293 --- /dev/null +++ b/arch/arm/crypto/poly1305-core.S_shipped @@ -0,0 +1,1158 @@ +#ifndef __KERNEL__ +# include "arm_arch.h" +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__ +# define poly1305_init poly1305_init_arm +# define poly1305_blocks poly1305_blocks_arm +# define poly1305_emit poly1305_emit_arm +.globl poly1305_blocks_neon +#endif + +#if defined(__thumb2__) +.syntax unified +.thumb +#else +.code 32 +#endif + +.text + +.globl poly1305_emit +.globl poly1305_blocks +.globl poly1305_init +.type poly1305_init,%function +.align 5 +poly1305_init: +.Lpoly1305_init: + stmdb sp!,{r4-r11} + + eor r3,r3,r3 + cmp r1,#0 + str r3,[r0,#0] @ zero hash value + str r3,[r0,#4] + str r3,[r0,#8] + str r3,[r0,#12] + str r3,[r0,#16] + str r3,[r0,#36] @ clear is_base2_26 + add r0,r0,#20 + +#ifdef __thumb2__ + it eq +#endif + moveq r0,#0 + beq .Lno_key + +#if __ARM_MAX_ARCH__>=7 + mov r3,#-1 + str r3,[r0,#28] @ impossible key power value +# ifndef __KERNEL__ + adr r11,.Lpoly1305_init + ldr r12,.LOPENSSL_armcap +# endif +#endif + ldrb r4,[r1,#0] + mov r10,#0x0fffffff + ldrb r5,[r1,#1] + and r3,r10,#-4 @ 0x0ffffffc + ldrb r6,[r1,#2] + ldrb r7,[r1,#3] + orr r4,r4,r5,lsl#8 + ldrb r5,[r1,#4] + orr r4,r4,r6,lsl#16 + ldrb r6,[r1,#5] + orr r4,r4,r7,lsl#24 + ldrb r7,[r1,#6] + and r4,r4,r10 + +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +# if !defined(_WIN32) + ldr r12,[r11,r12] @ OPENSSL_armcap_P +# endif +# if defined(__APPLE__) || defined(_WIN32) + ldr r12,[r12] +# endif +#endif + ldrb r8,[r1,#7] + orr r5,r5,r6,lsl#8 + ldrb r6,[r1,#8] + orr r5,r5,r7,lsl#16 + ldrb r7,[r1,#9] + orr r5,r5,r8,lsl#24 + ldrb r8,[r1,#10] + and r5,r5,r3 + +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + tst r12,#ARMV7_NEON @ check for NEON +# ifdef __thumb2__ + adr r9,.Lpoly1305_blocks_neon + adr r11,.Lpoly1305_blocks + it ne + movne r11,r9 + adr r12,.Lpoly1305_emit + orr r11,r11,#1 @ thumb-ify addresses + orr r12,r12,#1 +# else + add r12,r11,#(.Lpoly1305_emit-.Lpoly1305_init) + ite eq + addeq r11,r11,#(.Lpoly1305_blocks-.Lpoly1305_init) + addne r11,r11,#(.Lpoly1305_blocks_neon-.Lpoly1305_init) +# endif +#endif + ldrb r9,[r1,#11] + orr r6,r6,r7,lsl#8 + ldrb r7,[r1,#12] + orr r6,r6,r8,lsl#16 + ldrb r8,[r1,#13] + orr r6,r6,r9,lsl#24 + ldrb r9,[r1,#14] + and r6,r6,r3 + + ldrb r10,[r1,#15] + orr r7,r7,r8,lsl#8 + str r4,[r0,#0] + orr r7,r7,r9,lsl#16 + str r5,[r0,#4] + orr r7,r7,r10,lsl#24 + str r6,[r0,#8] + and r7,r7,r3 + str r7,[r0,#12] +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + stmia r2,{r11,r12} @ fill functions table + mov r0,#1 +#else + mov r0,#0 +#endif +.Lno_key: + ldmia sp!,{r4-r11} +#if __ARM_ARCH__>=5 + bx lr @ bx lr +#else + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size poly1305_init,.-poly1305_init +.type poly1305_blocks,%function +.align 5 +poly1305_blocks: +.Lpoly1305_blocks: + stmdb sp!,{r3-r11,lr} + + ands r2,r2,#-16 + beq .Lno_data + + add r2,r2,r1 @ end pointer + sub sp,sp,#32 + +#if __ARM_ARCH__<7 + ldmia r0,{r4-r12} @ load context + add r0,r0,#20 + str r2,[sp,#16] @ offload stuff + str r0,[sp,#12] +#else + ldr lr,[r0,#36] @ is_base2_26 + ldmia r0!,{r4-r8} @ load hash value + str r2,[sp,#16] @ offload stuff + str r0,[sp,#12] + + adds r9,r4,r5,lsl#26 @ base 2^26 -> base 2^32 + mov r10,r5,lsr#6 + adcs r10,r10,r6,lsl#20 + mov r11,r6,lsr#12 + adcs r11,r11,r7,lsl#14 + mov r12,r7,lsr#18 + adcs r12,r12,r8,lsl#8 + mov r2,#0 + teq lr,#0 + str r2,[r0,#16] @ clear is_base2_26 + adc r2,r2,r8,lsr#24 + + itttt ne + movne r4,r9 @ choose between radixes + movne r5,r10 + movne r6,r11 + movne r7,r12 + ldmia r0,{r9-r12} @ load key + it ne + movne r8,r2 +#endif + + mov lr,r1 + cmp r3,#0 + str r10,[sp,#20] + str r11,[sp,#24] + str r12,[sp,#28] + b .Loop + +.align 4 +.Loop: +#if __ARM_ARCH__<7 + ldrb r0,[lr],#16 @ load input +# ifdef __thumb2__ + it hi +# endif + addhi r8,r8,#1 @ 1<<128 + ldrb r1,[lr,#-15] + ldrb r2,[lr,#-14] + ldrb r3,[lr,#-13] + orr r1,r0,r1,lsl#8 + ldrb r0,[lr,#-12] + orr r2,r1,r2,lsl#16 + ldrb r1,[lr,#-11] + orr r3,r2,r3,lsl#24 + ldrb r2,[lr,#-10] + adds r4,r4,r3 @ accumulate input + + ldrb r3,[lr,#-9] + orr r1,r0,r1,lsl#8 + ldrb r0,[lr,#-8] + orr r2,r1,r2,lsl#16 + ldrb r1,[lr,#-7] + orr r3,r2,r3,lsl#24 + ldrb r2,[lr,#-6] + adcs r5,r5,r3 + + ldrb r3,[lr,#-5] + orr r1,r0,r1,lsl#8 + ldrb r0,[lr,#-4] + orr r2,r1,r2,lsl#16 + ldrb r1,[lr,#-3] + orr r3,r2,r3,lsl#24 + ldrb r2,[lr,#-2] + adcs r6,r6,r3 + + ldrb r3,[lr,#-1] + orr r1,r0,r1,lsl#8 + str lr,[sp,#8] @ offload input pointer + orr r2,r1,r2,lsl#16 + add r10,r10,r10,lsr#2 + orr r3,r2,r3,lsl#24 +#else + ldr r0,[lr],#16 @ load input + it hi + addhi r8,r8,#1 @ padbit + ldr r1,[lr,#-12] + ldr r2,[lr,#-8] + ldr r3,[lr,#-4] +# ifdef __ARMEB__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +# endif + adds r4,r4,r0 @ accumulate input + str lr,[sp,#8] @ offload input pointer + adcs r5,r5,r1 + add r10,r10,r10,lsr#2 + adcs r6,r6,r2 +#endif + add r11,r11,r11,lsr#2 + adcs r7,r7,r3 + add r12,r12,r12,lsr#2 + + umull r2,r3,r5,r9 + adc r8,r8,#0 + umull r0,r1,r4,r9 + umlal r2,r3,r8,r10 + umlal r0,r1,r7,r10 + ldr r10,[sp,#20] @ reload r10 + umlal r2,r3,r6,r12 + umlal r0,r1,r5,r12 + umlal r2,r3,r7,r11 + umlal r0,r1,r6,r11 + umlal r2,r3,r4,r10 + str r0,[sp,#0] @ future r4 + mul r0,r11,r8 + ldr r11,[sp,#24] @ reload r11 + adds r2,r2,r1 @ d1+=d0>>32 + eor r1,r1,r1 + adc lr,r3,#0 @ future r6 + str r2,[sp,#4] @ future r5 + + mul r2,r12,r8 + eor r3,r3,r3 + umlal r0,r1,r7,r12 + ldr r12,[sp,#28] @ reload r12 + umlal r2,r3,r7,r9 + umlal r0,r1,r6,r9 + umlal r2,r3,r6,r10 + umlal r0,r1,r5,r10 + umlal r2,r3,r5,r11 + umlal r0,r1,r4,r11 + umlal r2,r3,r4,r12 + ldr r4,[sp,#0] + mul r8,r9,r8 + ldr r5,[sp,#4] + + adds r6,lr,r0 @ d2+=d1>>32 + ldr lr,[sp,#8] @ reload input pointer + adc r1,r1,#0 + adds r7,r2,r1 @ d3+=d2>>32 + ldr r0,[sp,#16] @ reload end pointer + adc r3,r3,#0 + add r8,r8,r3 @ h4+=d3>>32 + + and r1,r8,#-4 + and r8,r8,#3 + add r1,r1,r1,lsr#2 @ *=5 + adds r4,r4,r1 + adcs r5,r5,#0 + adcs r6,r6,#0 + adcs r7,r7,#0 + adc r8,r8,#0 + + cmp r0,lr @ done yet? + bhi .Loop + + ldr r0,[sp,#12] + add sp,sp,#32 + stmdb r0,{r4-r8} @ store the result + +.Lno_data: +#if __ARM_ARCH__>=5 + ldmia sp!,{r3-r11,pc} +#else + ldmia sp!,{r3-r11,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size poly1305_blocks,.-poly1305_blocks +.type poly1305_emit,%function +.align 5 +poly1305_emit: +.Lpoly1305_emit: + stmdb sp!,{r4-r11} + + ldmia r0,{r3-r7} + +#if __ARM_ARCH__>=7 + ldr ip,[r0,#36] @ is_base2_26 + + adds r8,r3,r4,lsl#26 @ base 2^26 -> base 2^32 + mov r9,r4,lsr#6 + adcs r9,r9,r5,lsl#20 + mov r10,r5,lsr#12 + adcs r10,r10,r6,lsl#14 + mov r11,r6,lsr#18 + adcs r11,r11,r7,lsl#8 + mov r0,#0 + adc r0,r0,r7,lsr#24 + + tst ip,ip + itttt ne + movne r3,r8 + movne r4,r9 + movne r5,r10 + movne r6,r11 + it ne + movne r7,r0 +#endif + + adds r8,r3,#5 @ compare to modulus + adcs r9,r4,#0 + adcs r10,r5,#0 + adcs r11,r6,#0 + adc r0,r7,#0 + tst r0,#4 @ did it carry/borrow? + +#ifdef __thumb2__ + it ne +#endif + movne r3,r8 + ldr r8,[r2,#0] +#ifdef __thumb2__ + it ne +#endif + movne r4,r9 + ldr r9,[r2,#4] +#ifdef __thumb2__ + it ne +#endif + movne r5,r10 + ldr r10,[r2,#8] +#ifdef __thumb2__ + it ne +#endif + movne r6,r11 + ldr r11,[r2,#12] + + adds r3,r3,r8 + adcs r4,r4,r9 + adcs r5,r5,r10 + adc r6,r6,r11 + +#if __ARM_ARCH__>=7 +# ifdef __ARMEB__ + rev r3,r3 + rev r4,r4 + rev r5,r5 + rev r6,r6 +# endif + str r3,[r1,#0] + str r4,[r1,#4] + str r5,[r1,#8] + str r6,[r1,#12] +#else + strb r3,[r1,#0] + mov r3,r3,lsr#8 + strb r4,[r1,#4] + mov r4,r4,lsr#8 + strb r5,[r1,#8] + mov r5,r5,lsr#8 + strb r6,[r1,#12] + mov r6,r6,lsr#8 + + strb r3,[r1,#1] + mov r3,r3,lsr#8 + strb r4,[r1,#5] + mov r4,r4,lsr#8 + strb r5,[r1,#9] + mov r5,r5,lsr#8 + strb r6,[r1,#13] + mov r6,r6,lsr#8 + + strb r3,[r1,#2] + mov r3,r3,lsr#8 + strb r4,[r1,#6] + mov r4,r4,lsr#8 + strb r5,[r1,#10] + mov r5,r5,lsr#8 + strb r6,[r1,#14] + mov r6,r6,lsr#8 + + strb r3,[r1,#3] + strb r4,[r1,#7] + strb r5,[r1,#11] + strb r6,[r1,#15] +#endif + ldmia sp!,{r4-r11} +#if __ARM_ARCH__>=5 + bx lr @ bx lr +#else + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size poly1305_emit,.-poly1305_emit +#if __ARM_MAX_ARCH__>=7 +.fpu neon + +.type poly1305_init_neon,%function +.align 5 +poly1305_init_neon: +.Lpoly1305_init_neon: + ldr r3,[r0,#48] @ first table element + cmp r3,#-1 @ is value impossible? + bne .Lno_init_neon + + ldr r4,[r0,#20] @ load key base 2^32 + ldr r5,[r0,#24] + ldr r6,[r0,#28] + ldr r7,[r0,#32] + + and r2,r4,#0x03ffffff @ base 2^32 -> base 2^26 + mov r3,r4,lsr#26 + mov r4,r5,lsr#20 + orr r3,r3,r5,lsl#6 + mov r5,r6,lsr#14 + orr r4,r4,r6,lsl#12 + mov r6,r7,lsr#8 + orr r5,r5,r7,lsl#18 + and r3,r3,#0x03ffffff + and r4,r4,#0x03ffffff + and r5,r5,#0x03ffffff + + vdup.32 d0,r2 @ r^1 in both lanes + add r2,r3,r3,lsl#2 @ *5 + vdup.32 d1,r3 + add r3,r4,r4,lsl#2 + vdup.32 d2,r2 + vdup.32 d3,r4 + add r4,r5,r5,lsl#2 + vdup.32 d4,r3 + vdup.32 d5,r5 + add r5,r6,r6,lsl#2 + vdup.32 d6,r4 + vdup.32 d7,r6 + vdup.32 d8,r5 + + mov r5,#2 @ counter + +.Lsquare_neon: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4 + @ d1 = h1*r0 + h0*r1 + h4*5*r2 + h3*5*r3 + h2*5*r4 + @ d2 = h2*r0 + h1*r1 + h0*r2 + h4*5*r3 + h3*5*r4 + @ d3 = h3*r0 + h2*r1 + h1*r2 + h0*r3 + h4*5*r4 + @ d4 = h4*r0 + h3*r1 + h2*r2 + h1*r3 + h0*r4 + + vmull.u32 q5,d0,d0[1] + vmull.u32 q6,d1,d0[1] + vmull.u32 q7,d3,d0[1] + vmull.u32 q8,d5,d0[1] + vmull.u32 q9,d7,d0[1] + + vmlal.u32 q5,d7,d2[1] + vmlal.u32 q6,d0,d1[1] + vmlal.u32 q7,d1,d1[1] + vmlal.u32 q8,d3,d1[1] + vmlal.u32 q9,d5,d1[1] + + vmlal.u32 q5,d5,d4[1] + vmlal.u32 q6,d7,d4[1] + vmlal.u32 q8,d1,d3[1] + vmlal.u32 q7,d0,d3[1] + vmlal.u32 q9,d3,d3[1] + + vmlal.u32 q5,d3,d6[1] + vmlal.u32 q8,d0,d5[1] + vmlal.u32 q6,d5,d6[1] + vmlal.u32 q7,d7,d6[1] + vmlal.u32 q9,d1,d5[1] + + vmlal.u32 q8,d7,d8[1] + vmlal.u32 q5,d1,d8[1] + vmlal.u32 q6,d3,d8[1] + vmlal.u32 q7,d5,d8[1] + vmlal.u32 q9,d0,d7[1] + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ lazy reduction as discussed in "NEON crypto" by D.J. Bernstein + @ and P. Schwabe + @ + @ H0>>+H1>>+H2>>+H3>>+H4 + @ H3>>+H4>>*5+H0>>+H1 + @ + @ Trivia. + @ + @ Result of multiplication of n-bit number by m-bit number is + @ n+m bits wide. However! Even though 2^n is a n+1-bit number, + @ m-bit number multiplied by 2^n is still n+m bits wide. + @ + @ Sum of two n-bit numbers is n+1 bits wide, sum of three - n+2, + @ and so is sum of four. Sum of 2^m n-m-bit numbers and n-bit + @ one is n+1 bits wide. + @ + @ >>+ denotes Hnext += Hn>>26, Hn &= 0x3ffffff. This means that + @ H0, H2, H3 are guaranteed to be 26 bits wide, while H1 and H4 + @ can be 27. However! In cases when their width exceeds 26 bits + @ they are limited by 2^26+2^6. This in turn means that *sum* + @ of the products with these values can still be viewed as sum + @ of 52-bit numbers as long as the amount of addends is not a + @ power of 2. For example, + @ + @ H4 = H4*R0 + H3*R1 + H2*R2 + H1*R3 + H0 * R4, + @ + @ which can't be larger than 5 * (2^26 + 2^6) * (2^26 + 2^6), or + @ 5 * (2^52 + 2*2^32 + 2^12), which in turn is smaller than + @ 8 * (2^52) or 2^55. However, the value is then multiplied by + @ by 5, so we should be looking at 5 * 5 * (2^52 + 2^33 + 2^12), + @ which is less than 32 * (2^52) or 2^57. And when processing + @ data we are looking at triple as many addends... + @ + @ In key setup procedure pre-reduced H0 is limited by 5*4+1 and + @ 5*H4 - by 5*5 52-bit addends, or 57 bits. But when hashing the + @ input H0 is limited by (5*4+1)*3 addends, or 58 bits, while + @ 5*H4 by 5*5*3, or 59[!] bits. How is this relevant? vmlal.u32 + @ instruction accepts 2x32-bit input and writes 2x64-bit result. + @ This means that result of reduction have to be compressed upon + @ loop wrap-around. This can be done in the process of reduction + @ to minimize amount of instructions [as well as amount of + @ 128-bit instructions, which benefits low-end processors], but + @ one has to watch for H2 (which is narrower than H0) and 5*H4 + @ not being wider than 58 bits, so that result of right shift + @ by 26 bits fits in 32 bits. This is also useful on x86, + @ because it allows to use paddd in place for paddq, which + @ benefits Atom, where paddq is ridiculously slow. + + vshr.u64 q15,q8,#26 + vmovn.i64 d16,q8 + vshr.u64 q4,q5,#26 + vmovn.i64 d10,q5 + vadd.i64 q9,q9,q15 @ h3 -> h4 + vbic.i32 d16,#0xfc000000 @ &=0x03ffffff + vadd.i64 q6,q6,q4 @ h0 -> h1 + vbic.i32 d10,#0xfc000000 + + vshrn.u64 d30,q9,#26 + vmovn.i64 d18,q9 + vshr.u64 q4,q6,#26 + vmovn.i64 d12,q6 + vadd.i64 q7,q7,q4 @ h1 -> h2 + vbic.i32 d18,#0xfc000000 + vbic.i32 d12,#0xfc000000 + + vadd.i32 d10,d10,d30 + vshl.u32 d30,d30,#2 + vshrn.u64 d8,q7,#26 + vmovn.i64 d14,q7 + vadd.i32 d10,d10,d30 @ h4 -> h0 + vadd.i32 d16,d16,d8 @ h2 -> h3 + vbic.i32 d14,#0xfc000000 + + vshr.u32 d30,d10,#26 + vbic.i32 d10,#0xfc000000 + vshr.u32 d8,d16,#26 + vbic.i32 d16,#0xfc000000 + vadd.i32 d12,d12,d30 @ h0 -> h1 + vadd.i32 d18,d18,d8 @ h3 -> h4 + + subs r5,r5,#1 + beq .Lsquare_break_neon + + add r6,r0,#(48+0*9*4) + add r7,r0,#(48+1*9*4) + + vtrn.32 d0,d10 @ r^2:r^1 + vtrn.32 d3,d14 + vtrn.32 d5,d16 + vtrn.32 d1,d12 + vtrn.32 d7,d18 + + vshl.u32 d4,d3,#2 @ *5 + vshl.u32 d6,d5,#2 + vshl.u32 d2,d1,#2 + vshl.u32 d8,d7,#2 + vadd.i32 d4,d4,d3 + vadd.i32 d2,d2,d1 + vadd.i32 d6,d6,d5 + vadd.i32 d8,d8,d7 + + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]! + vst4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]! + vst4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]! + vst4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]! + vst1.32 {d8[0]},[r6,:32] + vst1.32 {d8[1]},[r7,:32] + + b .Lsquare_neon + +.align 4 +.Lsquare_break_neon: + add r6,r0,#(48+2*4*9) + add r7,r0,#(48+3*4*9) + + vmov d0,d10 @ r^4:r^3 + vshl.u32 d2,d12,#2 @ *5 + vmov d1,d12 + vshl.u32 d4,d14,#2 + vmov d3,d14 + vshl.u32 d6,d16,#2 + vmov d5,d16 + vshl.u32 d8,d18,#2 + vmov d7,d18 + vadd.i32 d2,d2,d12 + vadd.i32 d4,d4,d14 + vadd.i32 d6,d6,d16 + vadd.i32 d8,d8,d18 + + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]! + vst4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]! + vst4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]! + vst4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]! + vst1.32 {d8[0]},[r6] + vst1.32 {d8[1]},[r7] + +.Lno_init_neon: + bx lr @ bx lr +.size poly1305_init_neon,.-poly1305_init_neon + +.type poly1305_blocks_neon,%function +.align 5 +poly1305_blocks_neon: +.Lpoly1305_blocks_neon: + ldr ip,[r0,#36] @ is_base2_26 + + cmp r2,#64 + blo .Lpoly1305_blocks + + stmdb sp!,{r4-r7} + vstmdb sp!,{d8-d15} @ ABI specification says so + + tst ip,ip @ is_base2_26? + bne .Lbase2_26_neon + + stmdb sp!,{r1-r3,lr} + bl .Lpoly1305_init_neon + + ldr r4,[r0,#0] @ load hash value base 2^32 + ldr r5,[r0,#4] + ldr r6,[r0,#8] + ldr r7,[r0,#12] + ldr ip,[r0,#16] + + and r2,r4,#0x03ffffff @ base 2^32 -> base 2^26 + mov r3,r4,lsr#26 + veor d10,d10,d10 + mov r4,r5,lsr#20 + orr r3,r3,r5,lsl#6 + veor d12,d12,d12 + mov r5,r6,lsr#14 + orr r4,r4,r6,lsl#12 + veor d14,d14,d14 + mov r6,r7,lsr#8 + orr r5,r5,r7,lsl#18 + veor d16,d16,d16 + and r3,r3,#0x03ffffff + orr r6,r6,ip,lsl#24 + veor d18,d18,d18 + and r4,r4,#0x03ffffff + mov r1,#1 + and r5,r5,#0x03ffffff + str r1,[r0,#36] @ set is_base2_26 + + vmov.32 d10[0],r2 + vmov.32 d12[0],r3 + vmov.32 d14[0],r4 + vmov.32 d16[0],r5 + vmov.32 d18[0],r6 + adr r5,.Lzeros + + ldmia sp!,{r1-r3,lr} + b .Lhash_loaded + +.align 4 +.Lbase2_26_neon: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ load hash value + + veor d10,d10,d10 + veor d12,d12,d12 + veor d14,d14,d14 + veor d16,d16,d16 + veor d18,d18,d18 + vld4.32 {d10[0],d12[0],d14[0],d16[0]},[r0]! + adr r5,.Lzeros + vld1.32 {d18[0]},[r0] + sub r0,r0,#16 @ rewind + +.Lhash_loaded: + add r4,r1,#32 + mov r3,r3,lsl#24 + tst r2,#31 + beq .Leven + + vld4.32 {d20[0],d22[0],d24[0],d26[0]},[r1]! + vmov.32 d28[0],r3 + sub r2,r2,#16 + add r4,r1,#32 + +# ifdef __ARMEB__ + vrev32.8 q10,q10 + vrev32.8 q13,q13 + vrev32.8 q11,q11 + vrev32.8 q12,q12 +# endif + vsri.u32 d28,d26,#8 @ base 2^32 -> base 2^26 + vshl.u32 d26,d26,#18 + + vsri.u32 d26,d24,#14 + vshl.u32 d24,d24,#12 + vadd.i32 d29,d28,d18 @ add hash value and move to #hi + + vbic.i32 d26,#0xfc000000 + vsri.u32 d24,d22,#20 + vshl.u32 d22,d22,#6 + + vbic.i32 d24,#0xfc000000 + vsri.u32 d22,d20,#26 + vadd.i32 d27,d26,d16 + + vbic.i32 d20,#0xfc000000 + vbic.i32 d22,#0xfc000000 + vadd.i32 d25,d24,d14 + + vadd.i32 d21,d20,d10 + vadd.i32 d23,d22,d12 + + mov r7,r5 + add r6,r0,#48 + + cmp r2,r2 + b .Long_tail + +.align 4 +.Leven: + subs r2,r2,#64 + it lo + movlo r4,r5 + + vmov.i32 q14,#1<<24 @ padbit, yes, always + vld4.32 {d20,d22,d24,d26},[r1] @ inp[0:1] + add r1,r1,#64 + vld4.32 {d21,d23,d25,d27},[r4] @ inp[2:3] (or 0) + add r4,r4,#64 + itt hi + addhi r7,r0,#(48+1*9*4) + addhi r6,r0,#(48+3*9*4) + +# ifdef __ARMEB__ + vrev32.8 q10,q10 + vrev32.8 q13,q13 + vrev32.8 q11,q11 + vrev32.8 q12,q12 +# endif + vsri.u32 q14,q13,#8 @ base 2^32 -> base 2^26 + vshl.u32 q13,q13,#18 + + vsri.u32 q13,q12,#14 + vshl.u32 q12,q12,#12 + + vbic.i32 q13,#0xfc000000 + vsri.u32 q12,q11,#20 + vshl.u32 q11,q11,#6 + + vbic.i32 q12,#0xfc000000 + vsri.u32 q11,q10,#26 + + vbic.i32 q10,#0xfc000000 + vbic.i32 q11,#0xfc000000 + + bls .Lskip_loop + + vld4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]! @ load r^2 + vld4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]! @ load r^4 + vld4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]! + vld4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]! + b .Loop_neon + +.align 5 +.Loop_neon: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2 + @ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r + @ ___________________/ + @ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2 + @ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r + @ ___________________/ ____________________/ + @ + @ Note that we start with inp[2:3]*r^2. This is because it + @ doesn't depend on reduction in previous iteration. + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ d4 = h4*r0 + h3*r1 + h2*r2 + h1*r3 + h0*r4 + @ d3 = h3*r0 + h2*r1 + h1*r2 + h0*r3 + h4*5*r4 + @ d2 = h2*r0 + h1*r1 + h0*r2 + h4*5*r3 + h3*5*r4 + @ d1 = h1*r0 + h0*r1 + h4*5*r2 + h3*5*r3 + h2*5*r4 + @ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4 + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ inp[2:3]*r^2 + + vadd.i32 d24,d24,d14 @ accumulate inp[0:1] + vmull.u32 q7,d25,d0[1] + vadd.i32 d20,d20,d10 + vmull.u32 q5,d21,d0[1] + vadd.i32 d26,d26,d16 + vmull.u32 q8,d27,d0[1] + vmlal.u32 q7,d23,d1[1] + vadd.i32 d22,d22,d12 + vmull.u32 q6,d23,d0[1] + + vadd.i32 d28,d28,d18 + vmull.u32 q9,d29,d0[1] + subs r2,r2,#64 + vmlal.u32 q5,d29,d2[1] + it lo + movlo r4,r5 + vmlal.u32 q8,d25,d1[1] + vld1.32 d8[1],[r7,:32] + vmlal.u32 q6,d21,d1[1] + vmlal.u32 q9,d27,d1[1] + + vmlal.u32 q5,d27,d4[1] + vmlal.u32 q8,d23,d3[1] + vmlal.u32 q9,d25,d3[1] + vmlal.u32 q6,d29,d4[1] + vmlal.u32 q7,d21,d3[1] + + vmlal.u32 q8,d21,d5[1] + vmlal.u32 q5,d25,d6[1] + vmlal.u32 q9,d23,d5[1] + vmlal.u32 q6,d27,d6[1] + vmlal.u32 q7,d29,d6[1] + + vmlal.u32 q8,d29,d8[1] + vmlal.u32 q5,d23,d8[1] + vmlal.u32 q9,d21,d7[1] + vmlal.u32 q6,d25,d8[1] + vmlal.u32 q7,d27,d8[1] + + vld4.32 {d21,d23,d25,d27},[r4] @ inp[2:3] (or 0) + add r4,r4,#64 + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ (hash+inp[0:1])*r^4 and accumulate + + vmlal.u32 q8,d26,d0[0] + vmlal.u32 q5,d20,d0[0] + vmlal.u32 q9,d28,d0[0] + vmlal.u32 q6,d22,d0[0] + vmlal.u32 q7,d24,d0[0] + vld1.32 d8[0],[r6,:32] + + vmlal.u32 q8,d24,d1[0] + vmlal.u32 q5,d28,d2[0] + vmlal.u32 q9,d26,d1[0] + vmlal.u32 q6,d20,d1[0] + vmlal.u32 q7,d22,d1[0] + + vmlal.u32 q8,d22,d3[0] + vmlal.u32 q5,d26,d4[0] + vmlal.u32 q9,d24,d3[0] + vmlal.u32 q6,d28,d4[0] + vmlal.u32 q7,d20,d3[0] + + vmlal.u32 q8,d20,d5[0] + vmlal.u32 q5,d24,d6[0] + vmlal.u32 q9,d22,d5[0] + vmlal.u32 q6,d26,d6[0] + vmlal.u32 q8,d28,d8[0] + + vmlal.u32 q7,d28,d6[0] + vmlal.u32 q5,d22,d8[0] + vmlal.u32 q9,d20,d7[0] + vmov.i32 q14,#1<<24 @ padbit, yes, always + vmlal.u32 q6,d24,d8[0] + vmlal.u32 q7,d26,d8[0] + + vld4.32 {d20,d22,d24,d26},[r1] @ inp[0:1] + add r1,r1,#64 +# ifdef __ARMEB__ + vrev32.8 q10,q10 + vrev32.8 q11,q11 + vrev32.8 q12,q12 + vrev32.8 q13,q13 +# endif + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ lazy reduction interleaved with base 2^32 -> base 2^26 of + @ inp[0:3] previously loaded to q10-q13 and smashed to q10-q14. + + vshr.u64 q15,q8,#26 + vmovn.i64 d16,q8 + vshr.u64 q4,q5,#26 + vmovn.i64 d10,q5 + vadd.i64 q9,q9,q15 @ h3 -> h4 + vbic.i32 d16,#0xfc000000 + vsri.u32 q14,q13,#8 @ base 2^32 -> base 2^26 + vadd.i64 q6,q6,q4 @ h0 -> h1 + vshl.u32 q13,q13,#18 + vbic.i32 d10,#0xfc000000 + + vshrn.u64 d30,q9,#26 + vmovn.i64 d18,q9 + vshr.u64 q4,q6,#26 + vmovn.i64 d12,q6 + vadd.i64 q7,q7,q4 @ h1 -> h2 + vsri.u32 q13,q12,#14 + vbic.i32 d18,#0xfc000000 + vshl.u32 q12,q12,#12 + vbic.i32 d12,#0xfc000000 + + vadd.i32 d10,d10,d30 + vshl.u32 d30,d30,#2 + vbic.i32 q13,#0xfc000000 + vshrn.u64 d8,q7,#26 + vmovn.i64 d14,q7 + vaddl.u32 q5,d10,d30 @ h4 -> h0 [widen for a sec] + vsri.u32 q12,q11,#20 + vadd.i32 d16,d16,d8 @ h2 -> h3 + vshl.u32 q11,q11,#6 + vbic.i32 d14,#0xfc000000 + vbic.i32 q12,#0xfc000000 + + vshrn.u64 d30,q5,#26 @ re-narrow + vmovn.i64 d10,q5 + vsri.u32 q11,q10,#26 + vbic.i32 q10,#0xfc000000 + vshr.u32 d8,d16,#26 + vbic.i32 d16,#0xfc000000 + vbic.i32 d10,#0xfc000000 + vadd.i32 d12,d12,d30 @ h0 -> h1 + vadd.i32 d18,d18,d8 @ h3 -> h4 + vbic.i32 q11,#0xfc000000 + + bhi .Loop_neon + +.Lskip_loop: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1 + + add r7,r0,#(48+0*9*4) + add r6,r0,#(48+1*9*4) + adds r2,r2,#32 + it ne + movne r2,#0 + bne .Long_tail + + vadd.i32 d25,d24,d14 @ add hash value and move to #hi + vadd.i32 d21,d20,d10 + vadd.i32 d27,d26,d16 + vadd.i32 d23,d22,d12 + vadd.i32 d29,d28,d18 + +.Long_tail: + vld4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]! @ load r^1 + vld4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]! @ load r^2 + + vadd.i32 d24,d24,d14 @ can be redundant + vmull.u32 q7,d25,d0 + vadd.i32 d20,d20,d10 + vmull.u32 q5,d21,d0 + vadd.i32 d26,d26,d16 + vmull.u32 q8,d27,d0 + vadd.i32 d22,d22,d12 + vmull.u32 q6,d23,d0 + vadd.i32 d28,d28,d18 + vmull.u32 q9,d29,d0 + + vmlal.u32 q5,d29,d2 + vld4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]! + vmlal.u32 q8,d25,d1 + vld4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]! + vmlal.u32 q6,d21,d1 + vmlal.u32 q9,d27,d1 + vmlal.u32 q7,d23,d1 + + vmlal.u32 q8,d23,d3 + vld1.32 d8[1],[r7,:32] + vmlal.u32 q5,d27,d4 + vld1.32 d8[0],[r6,:32] + vmlal.u32 q9,d25,d3 + vmlal.u32 q6,d29,d4 + vmlal.u32 q7,d21,d3 + + vmlal.u32 q8,d21,d5 + it ne + addne r7,r0,#(48+2*9*4) + vmlal.u32 q5,d25,d6 + it ne + addne r6,r0,#(48+3*9*4) + vmlal.u32 q9,d23,d5 + vmlal.u32 q6,d27,d6 + vmlal.u32 q7,d29,d6 + + vmlal.u32 q8,d29,d8 + vorn q0,q0,q0 @ all-ones, can be redundant + vmlal.u32 q5,d23,d8 + vshr.u64 q0,q0,#38 + vmlal.u32 q9,d21,d7 + vmlal.u32 q6,d25,d8 + vmlal.u32 q7,d27,d8 + + beq .Lshort_tail + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ (hash+inp[0:1])*r^4:r^3 and accumulate + + vld4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]! @ load r^3 + vld4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]! @ load r^4 + + vmlal.u32 q7,d24,d0 + vmlal.u32 q5,d20,d0 + vmlal.u32 q8,d26,d0 + vmlal.u32 q6,d22,d0 + vmlal.u32 q9,d28,d0 + + vmlal.u32 q5,d28,d2 + vld4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]! + vmlal.u32 q8,d24,d1 + vld4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]! + vmlal.u32 q6,d20,d1 + vmlal.u32 q9,d26,d1 + vmlal.u32 q7,d22,d1 + + vmlal.u32 q8,d22,d3 + vld1.32 d8[1],[r7,:32] + vmlal.u32 q5,d26,d4 + vld1.32 d8[0],[r6,:32] + vmlal.u32 q9,d24,d3 + vmlal.u32 q6,d28,d4 + vmlal.u32 q7,d20,d3 + + vmlal.u32 q8,d20,d5 + vmlal.u32 q5,d24,d6 + vmlal.u32 q9,d22,d5 + vmlal.u32 q6,d26,d6 + vmlal.u32 q7,d28,d6 + + vmlal.u32 q8,d28,d8 + vorn q0,q0,q0 @ all-ones + vmlal.u32 q5,d22,d8 + vshr.u64 q0,q0,#38 + vmlal.u32 q9,d20,d7 + vmlal.u32 q6,d24,d8 + vmlal.u32 q7,d26,d8 + +.Lshort_tail: + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ horizontal addition + + vadd.i64 d16,d16,d17 + vadd.i64 d10,d10,d11 + vadd.i64 d18,d18,d19 + vadd.i64 d12,d12,d13 + vadd.i64 d14,d14,d15 + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ lazy reduction, but without narrowing + + vshr.u64 q15,q8,#26 + vand.i64 q8,q8,q0 + vshr.u64 q4,q5,#26 + vand.i64 q5,q5,q0 + vadd.i64 q9,q9,q15 @ h3 -> h4 + vadd.i64 q6,q6,q4 @ h0 -> h1 + + vshr.u64 q15,q9,#26 + vand.i64 q9,q9,q0 + vshr.u64 q4,q6,#26 + vand.i64 q6,q6,q0 + vadd.i64 q7,q7,q4 @ h1 -> h2 + + vadd.i64 q5,q5,q15 + vshl.u64 q15,q15,#2 + vshr.u64 q4,q7,#26 + vand.i64 q7,q7,q0 + vadd.i64 q5,q5,q15 @ h4 -> h0 + vadd.i64 q8,q8,q4 @ h2 -> h3 + + vshr.u64 q15,q5,#26 + vand.i64 q5,q5,q0 + vshr.u64 q4,q8,#26 + vand.i64 q8,q8,q0 + vadd.i64 q6,q6,q15 @ h0 -> h1 + vadd.i64 q9,q9,q4 @ h3 -> h4 + + cmp r2,#0 + bne .Leven + + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ store hash value + + vst4.32 {d10[0],d12[0],d14[0],d16[0]},[r0]! + vst1.32 {d18[0]},[r0] + + vldmia sp!,{d8-d15} @ epilogue + ldmia sp!,{r4-r7} + bx lr @ bx lr +.size poly1305_blocks_neon,.-poly1305_blocks_neon + +.align 5 +.Lzeros: +.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 +#ifndef __KERNEL__ +.LOPENSSL_armcap: +# ifdef _WIN32 +.word OPENSSL_armcap_P +# else +.word OPENSSL_armcap_P-.Lpoly1305_init +# endif +.comm OPENSSL_armcap_P,4,4 +.hidden OPENSSL_armcap_P +#endif +#endif +.asciz "Poly1305 for ARMv4/NEON, CRYPTOGAMS by @dot-asm" +.align 2 diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c new file mode 100644 index 000000000000..abe3f2d587dc --- /dev/null +++ b/arch/arm/crypto/poly1305-glue.c @@ -0,0 +1,279 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * OpenSSL/Cryptogams accelerated Poly1305 transform for ARM + * + * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org> + */ + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> +#include <asm/unaligned.h> +#include <crypto/algapi.h> +#include <crypto/internal/hash.h> +#include <crypto/internal/poly1305.h> +#include <crypto/internal/simd.h> +#include <linux/cpufeature.h> +#include <linux/crypto.h> +#include <linux/jump_label.h> +#include <linux/module.h> + +void poly1305_init_arm(void *state, const u8 *key); +void poly1305_blocks_arm(void *state, const u8 *src, u32 len, u32 hibit); +void poly1305_emit_arm(void *state, __le32 *digest, const u32 *nonce); + +void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit) +{ +} + +static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); + +void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key) +{ + poly1305_init_arm(&dctx->h, key); + dctx->s[0] = get_unaligned_le32(key + 16); + dctx->s[1] = get_unaligned_le32(key + 20); + dctx->s[2] = get_unaligned_le32(key + 24); + dctx->s[3] = get_unaligned_le32(key + 28); + dctx->buflen = 0; +} +EXPORT_SYMBOL(poly1305_init_arch); + +static int arm_poly1305_init(struct shash_desc *desc) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + + dctx->buflen = 0; + dctx->rset = 0; + dctx->sset = false; + + return 0; +} + +static void arm_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src, + u32 len, u32 hibit, bool do_neon) +{ + if (unlikely(!dctx->sset)) { + if (!dctx->rset) { + poly1305_init_arm(&dctx->h, src); + src += POLY1305_BLOCK_SIZE; + len -= POLY1305_BLOCK_SIZE; + dctx->rset = 1; + } + if (len >= POLY1305_BLOCK_SIZE) { + dctx->s[0] = get_unaligned_le32(src + 0); + dctx->s[1] = get_unaligned_le32(src + 4); + dctx->s[2] = get_unaligned_le32(src + 8); + dctx->s[3] = get_unaligned_le32(src + 12); + src += POLY1305_BLOCK_SIZE; + len -= POLY1305_BLOCK_SIZE; + dctx->sset = true; + } + if (len < POLY1305_BLOCK_SIZE) + return; + } + + len &= ~(POLY1305_BLOCK_SIZE - 1); + + if (static_branch_likely(&have_neon) && likely(do_neon)) + poly1305_blocks_neon(&dctx->h, src, len, hibit); + else + poly1305_blocks_arm(&dctx->h, src, len, hibit); +} + +static void arm_poly1305_do_update(struct poly1305_desc_ctx *dctx, + const u8 *src, u32 len, bool do_neon) +{ + if (unlikely(dctx->buflen)) { + u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen); + + memcpy(dctx->buf + dctx->buflen, src, bytes); + src += bytes; + len -= bytes; + dctx->buflen += bytes; + + if (dctx->buflen == POLY1305_BLOCK_SIZE) { + arm_poly1305_blocks(dctx, dctx->buf, + POLY1305_BLOCK_SIZE, 1, false); + dctx->buflen = 0; + } + } + + if (likely(len >= POLY1305_BLOCK_SIZE)) { + arm_poly1305_blocks(dctx, src, len, 1, do_neon); + src += round_down(len, POLY1305_BLOCK_SIZE); + len %= POLY1305_BLOCK_SIZE; + } + + if (unlikely(len)) { + dctx->buflen = len; + memcpy(dctx->buf, src, len); + } +} + +static int arm_poly1305_update(struct shash_desc *desc, + const u8 *src, unsigned int srclen) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + + arm_poly1305_do_update(dctx, src, srclen, false); + return 0; +} + +static int __maybe_unused arm_poly1305_update_neon(struct shash_desc *desc, + const u8 *src, + unsigned int srclen) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + bool do_neon = crypto_simd_usable() && srclen > 128; + + if (static_branch_likely(&have_neon) && do_neon) + kernel_neon_begin(); + arm_poly1305_do_update(dctx, src, srclen, do_neon); + if (static_branch_likely(&have_neon) && do_neon) + kernel_neon_end(); + return 0; +} + +void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src, + unsigned int nbytes) +{ + bool do_neon = IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && + crypto_simd_usable(); + + if (unlikely(dctx->buflen)) { + u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen); + + memcpy(dctx->buf + dctx->buflen, src, bytes); + src += bytes; + nbytes -= bytes; + dctx->buflen += bytes; + + if (dctx->buflen == POLY1305_BLOCK_SIZE) { + poly1305_blocks_arm(&dctx->h, dctx->buf, + POLY1305_BLOCK_SIZE, 1); + dctx->buflen = 0; + } + } + + if (likely(nbytes >= POLY1305_BLOCK_SIZE)) { + unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE); + + if (static_branch_likely(&have_neon) && do_neon) { + kernel_neon_begin(); + poly1305_blocks_neon(&dctx->h, src, len, 1); + kernel_neon_end(); + } else { + poly1305_blocks_arm(&dctx->h, src, len, 1); + } + src += len; + nbytes %= POLY1305_BLOCK_SIZE; + } + + if (unlikely(nbytes)) { + dctx->buflen = nbytes; + memcpy(dctx->buf, src, nbytes); + } +} +EXPORT_SYMBOL(poly1305_update_arch); + +void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst) +{ + __le32 digest[4]; + u64 f = 0; + + if (unlikely(dctx->buflen)) { + dctx->buf[dctx->buflen++] = 1; + memset(dctx->buf + dctx->buflen, 0, + POLY1305_BLOCK_SIZE - dctx->buflen); + poly1305_blocks_arm(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0); + } + + poly1305_emit_arm(&dctx->h, digest, dctx->s); + + /* mac = (h + s) % (2^128) */ + f = (f >> 32) + le32_to_cpu(digest[0]); + put_unaligned_le32(f, dst); + f = (f >> 32) + le32_to_cpu(digest[1]); + put_unaligned_le32(f, dst + 4); + f = (f >> 32) + le32_to_cpu(digest[2]); + put_unaligned_le32(f, dst + 8); + f = (f >> 32) + le32_to_cpu(digest[3]); + put_unaligned_le32(f, dst + 12); + + *dctx = (struct poly1305_desc_ctx){}; +} +EXPORT_SYMBOL(poly1305_final_arch); + +static int arm_poly1305_final(struct shash_desc *desc, u8 *dst) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + + if (unlikely(!dctx->sset)) + return -ENOKEY; + + poly1305_final_arch(dctx, dst); + return 0; +} + +static struct shash_alg arm_poly1305_algs[] = {{ + .init = arm_poly1305_init, + .update = arm_poly1305_update, + .final = arm_poly1305_final, + .digestsize = POLY1305_DIGEST_SIZE, + .descsize = sizeof(struct poly1305_desc_ctx), + + .base.cra_name = "poly1305", + .base.cra_driver_name = "poly1305-arm", + .base.cra_priority = 150, + .base.cra_blocksize = POLY1305_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, +#ifdef CONFIG_KERNEL_MODE_NEON +}, { + .init = arm_poly1305_init, + .update = arm_poly1305_update_neon, + .final = arm_poly1305_final, + .digestsize = POLY1305_DIGEST_SIZE, + .descsize = sizeof(struct poly1305_desc_ctx), + + .base.cra_name = "poly1305", + .base.cra_driver_name = "poly1305-neon", + .base.cra_priority = 200, + .base.cra_blocksize = POLY1305_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, +#endif +}}; + +static int __init arm_poly1305_mod_init(void) +{ + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && + (elf_hwcap & HWCAP_NEON)) + static_branch_enable(&have_neon); + else if (IS_REACHABLE(CONFIG_CRYPTO_HASH)) + /* register only the first entry */ + return crypto_register_shash(&arm_poly1305_algs[0]); + + return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? + crypto_register_shashes(arm_poly1305_algs, + ARRAY_SIZE(arm_poly1305_algs)) : 0; +} + +static void __exit arm_poly1305_mod_exit(void) +{ + if (!IS_REACHABLE(CONFIG_CRYPTO_HASH)) + return; + if (!static_branch_likely(&have_neon)) { + crypto_unregister_shash(&arm_poly1305_algs[0]); + return; + } + crypto_unregister_shashes(arm_poly1305_algs, + ARRAY_SIZE(arm_poly1305_algs)); +} + +module_init(arm_poly1305_mod_init); +module_exit(arm_poly1305_mod_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("poly1305"); +MODULE_ALIAS_CRYPTO("poly1305-arm"); +MODULE_ALIAS_CRYPTO("poly1305-neon"); diff --git a/arch/arm/crypto/sha1-ce-core.S b/arch/arm/crypto/sha1-ce-core.S index 49a74a441aec..8a702e051738 100644 --- a/arch/arm/crypto/sha1-ce-core.S +++ b/arch/arm/crypto/sha1-ce-core.S @@ -10,6 +10,7 @@ #include <asm/assembler.h> .text + .arch armv8-a .fpu crypto-neon-fp-armv8 k0 .req q0 diff --git a/arch/arm/crypto/sha2-ce-core.S b/arch/arm/crypto/sha2-ce-core.S index 4ad517577e23..b6369d2440a1 100644 --- a/arch/arm/crypto/sha2-ce-core.S +++ b/arch/arm/crypto/sha2-ce-core.S @@ -10,6 +10,7 @@ #include <asm/assembler.h> .text + .arch armv8-a .fpu crypto-neon-fp-armv8 k0 .req q7 diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 68ca86f85eb7..fa579b23b4df 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -12,7 +12,6 @@ generic-y += local.h generic-y += local64.h generic-y += mm-arch-hooks.h generic-y += mmiowb.h -generic-y += msi.h generic-y += parport.h generic-y += preempt.h generic-y += seccomp.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 0555f14cc8be..fa50bb04f580 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -333,7 +333,7 @@ static inline u64 __gic_readq_nonatomic(const volatile void __iomem *addr) * GITS_VPENDBASER - the Valid bit must be cleared before changing * anything else. */ -static inline void gits_write_vpendbaser(u64 val, void * __iomem addr) +static inline void gits_write_vpendbaser(u64 val, void __iomem *addr) { u32 tmp; diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h index b67e5fc1fe43..7c3001a6a775 100644 --- a/arch/arm/include/asm/dma-direct.h +++ b/arch/arm/include/asm/dma-direct.h @@ -14,23 +14,4 @@ static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr) return __pfn_to_phys(dma_to_pfn(dev, dev_addr)) + offset; } -static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) -{ - u64 limit, mask; - - if (!dev->dma_mask) - return 0; - - mask = *dev->dma_mask; - - limit = (mask + 1) & ~mask; - if (limit && size > limit) - return 0; - - if ((addr | (addr + size - 1)) & ~mask) - return 0; - - return 1; -} - #endif /* ASM_ARM_DMA_DIRECT_H */ diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index 567dbede4785..f1d0a7807cd0 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -82,7 +82,7 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_CPU_CP15_MMU -static inline unsigned int get_domain(void) +static __always_inline unsigned int get_domain(void) { unsigned int domain; @@ -94,7 +94,7 @@ static inline unsigned int get_domain(void) return domain; } -static inline void set_domain(unsigned val) +static __always_inline void set_domain(unsigned int val) { asm volatile( "mcr p15, 0, %0, c3, c0 @ set domain" @@ -102,12 +102,12 @@ static inline void set_domain(unsigned val) isb(); } #else -static inline unsigned int get_domain(void) +static __always_inline unsigned int get_domain(void) { return 0; } -static inline void set_domain(unsigned val) +static __always_inline void set_domain(unsigned int val) { } #endif diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 18b0197f2384..48ec1d0337da 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -11,7 +11,6 @@ #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ #ifndef __ASSEMBLY__ -extern void mcount(void); extern void __gnu_mcount_nc(void); #ifdef CONFIG_DYNAMIC_FTRACE @@ -23,9 +22,6 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) /* With Thumb-2, the recorded addresses have the lsb set */ return addr & ~1; } - -extern void ftrace_caller_old(void); -extern void ftrace_call_old(void); #endif #endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 32edfadb1593..a6d4ee86ba54 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -118,6 +118,8 @@ #define L310_AUX_CTRL_STORE_LIMITATION BIT(11) /* R2P0+ */ #define L310_AUX_CTRL_EXCLUSIVE_CACHE BIT(12) #define L310_AUX_CTRL_ASSOCIATIVITY_16 BIT(16) +#define L310_AUX_CTRL_FWA_SHIFT 23 +#define L310_AUX_CTRL_FWA_MASK (3 << 23) #define L310_AUX_CTRL_CACHE_REPLACE_RR BIT(25) /* R2P0+ */ #define L310_AUX_CTRL_NS_LOCKDOWN BIT(26) #define L310_AUX_CTRL_NS_INT_CTRL BIT(27) diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index ac54c06764e6..62358d3ca0a8 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -53,6 +53,9 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_DEBUG_ARCH_V7_MM 4 #define ARM_DEBUG_ARCH_V7_1 5 #define ARM_DEBUG_ARCH_V8 6 +#define ARM_DEBUG_ARCH_V8_1 7 +#define ARM_DEBUG_ARCH_V8_2 8 +#define ARM_DEBUG_ARCH_V8_4 9 /* Breakpoint */ #define ARM_BREAKPOINT_EXECUTE 0 diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 7a0596fcb2e7..aefdabdbeb84 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -392,7 +392,6 @@ static inline void memcpy_toio(volatile void __iomem *to, const void *from, */ void __iomem *ioremap(resource_size_t res_cookie, size_t size); #define ioremap ioremap -#define ioremap_nocache ioremap /* * Do not use ioremap_cache for mapping memory. Use memremap instead. @@ -400,12 +399,6 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size); void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size); #define ioremap_cache ioremap_cache -/* - * Do not use ioremap_cached in new code. Provided for the benefit of - * the pxa2xx-flash MTD driver only. - */ -void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size); - void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size); #define ioremap_wc ioremap_wc #define ioremap_wt ioremap_wc diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index 0125aa059d5b..9c04bd810d07 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -162,6 +162,7 @@ #define HSR_ISV (_AC(1, UL) << HSR_ISV_SHIFT) #define HSR_SRT_SHIFT (16) #define HSR_SRT_MASK (0xf << HSR_SRT_SHIFT) +#define HSR_CM (1 << 8) #define HSR_FSC (0x3f) #define HSR_FSC_TYPE (0x3c) #define HSR_SSE (1 << 21) diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 40002416efec..9b118516d2db 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -95,12 +95,12 @@ static inline unsigned long *vcpu_hcr(const struct kvm_vcpu *vcpu) return (unsigned long *)&vcpu->arch.hcr; } -static inline void vcpu_clear_wfe_traps(struct kvm_vcpu *vcpu) +static inline void vcpu_clear_wfx_traps(struct kvm_vcpu *vcpu) { vcpu->arch.hcr &= ~HCR_TWE; } -static inline void vcpu_set_wfe_traps(struct kvm_vcpu *vcpu) +static inline void vcpu_set_wfx_traps(struct kvm_vcpu *vcpu) { vcpu->arch.hcr |= HCR_TWE; } @@ -167,6 +167,11 @@ static inline bool kvm_vcpu_dabt_isvalid(struct kvm_vcpu *vcpu) return kvm_vcpu_get_hsr(vcpu) & HSR_ISV; } +static inline unsigned long kvm_vcpu_dabt_iss_nisv_sanitized(const struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & (HSR_CM | HSR_WNR | HSR_FSC); +} + static inline bool kvm_vcpu_dabt_iswrite(struct kvm_vcpu *vcpu) { return kvm_vcpu_get_hsr(vcpu) & HSR_WNR; diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 8a37c8e89777..556cd818eccf 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -7,6 +7,7 @@ #ifndef __ARM_KVM_HOST_H__ #define __ARM_KVM_HOST_H__ +#include <linux/arm-smccc.h> #include <linux/errno.h> #include <linux/types.h> #include <linux/kvm_types.h> @@ -38,6 +39,7 @@ KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) #define KVM_REQ_IRQ_PENDING KVM_ARCH_REQ(1) #define KVM_REQ_VCPU_RESET KVM_ARCH_REQ(2) +#define KVM_REQ_RECORD_STEAL KVM_ARCH_REQ(3) DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use); @@ -76,6 +78,14 @@ struct kvm_arch { /* Mandated version of PSCI */ u32 psci_version; + + /* + * If we encounter a data abort without valid instruction syndrome + * information, report this to user space. User space can (and + * should) opt in to this feature if KVM_CAP_ARM_NISV_TO_USER is + * supported. + */ + bool return_nisv_io_abort_to_user; }; #define KVM_NR_MEM_OBJS 40 @@ -323,6 +333,29 @@ static inline int kvm_arch_vm_ioctl_check_extension(struct kvm *kvm, long ext) int kvm_perf_init(void); int kvm_perf_teardown(void); +static inline long kvm_hypercall_pv_features(struct kvm_vcpu *vcpu) +{ + return SMCCC_RET_NOT_SUPPORTED; +} + +static inline gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu) +{ + return GPA_INVALID; +} + +static inline void kvm_update_stolen_time(struct kvm_vcpu *vcpu) +{ +} + +static inline void kvm_arm_pvtime_vcpu_init(struct kvm_vcpu_arch *vcpu_arch) +{ +} + +static inline bool kvm_arm_is_pvtime_enabled(struct kvm_vcpu_arch *vcpu_arch) +{ + return false; +} + void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot); struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr); diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 0abd389cf0ec..68e6f25784a4 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -27,5 +27,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +extern void pcibios_report_status(unsigned int status_mask, int warn); + #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 3ae120cd1715..eabcb48a7840 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -12,7 +12,7 @@ #ifndef CONFIG_MMU -#include <asm-generic/4level-fixup.h> +#include <asm-generic/pgtable-nopud.h> #include <asm/pgtable-nommu.h> #else diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 303248e5b990..98c6b91be4a8 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -22,7 +22,7 @@ * perform such accesses (eg, via list poison values) which could then * be exploited for priviledge escalation. */ -static inline unsigned int uaccess_save_and_enable(void) +static __always_inline unsigned int uaccess_save_and_enable(void) { #ifdef CONFIG_CPU_SW_DOMAIN_PAN unsigned int old_domain = get_domain(); @@ -37,7 +37,7 @@ static inline unsigned int uaccess_save_and_enable(void) #endif } -static inline void uaccess_restore(unsigned int flags) +static __always_inline void uaccess_restore(unsigned int flags) { #ifdef CONFIG_CPU_SW_DOMAIN_PAN /* Restore the user access mask */ diff --git a/arch/arm/include/asm/vdso/gettimeofday.h b/arch/arm/include/asm/vdso/gettimeofday.h new file mode 100644 index 000000000000..5b879ae7afc1 --- /dev/null +++ b/arch/arm/include/asm/vdso/gettimeofday.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 ARM Limited + */ +#ifndef __ASM_VDSO_GETTIMEOFDAY_H +#define __ASM_VDSO_GETTIMEOFDAY_H + +#ifndef __ASSEMBLY__ + +#include <asm/barrier.h> +#include <asm/cp15.h> +#include <asm/unistd.h> +#include <uapi/linux/time.h> + +#define VDSO_HAS_CLOCK_GETRES 1 + +extern struct vdso_data *__get_datapage(void); + +static __always_inline int gettimeofday_fallback( + struct __kernel_old_timeval *_tv, + struct timezone *_tz) +{ + register struct timezone *tz asm("r1") = _tz; + register struct __kernel_old_timeval *tv asm("r0") = _tv; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_gettimeofday; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (tv), "r" (tz), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline long clock_gettime_fallback( + clockid_t _clkid, + struct __kernel_timespec *_ts) +{ + register struct __kernel_timespec *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_clock_gettime64; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline int clock_getres_fallback( + clockid_t _clkid, + struct __kernel_timespec *_ts) +{ + register struct __kernel_timespec *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_clock_getres_time64; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline u64 __arch_get_hw_counter(int clock_mode) +{ +#ifdef CONFIG_ARM_ARCH_TIMER + u64 cycle_now; + + isb(); + cycle_now = read_sysreg(CNTVCT); + + return cycle_now; +#else + return -EINVAL; /* use fallback */ +#endif +} + +static __always_inline const struct vdso_data *__arch_get_vdso_data(void) +{ + return __get_datapage(); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_VDSO_GETTIMEOFDAY_H */ diff --git a/arch/arm/include/asm/vdso/vsyscall.h b/arch/arm/include/asm/vdso/vsyscall.h new file mode 100644 index 000000000000..c4166f317071 --- /dev/null +++ b/arch/arm/include/asm/vdso/vsyscall.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_VDSO_VSYSCALL_H +#define __ASM_VDSO_VSYSCALL_H + +#ifndef __ASSEMBLY__ + +#include <linux/timekeeper_internal.h> +#include <vdso/datapage.h> +#include <asm/cacheflush.h> + +extern struct vdso_data *vdso_data; +extern bool cntvct_ok; + +static __always_inline +bool tk_is_cntvct(const struct timekeeper *tk) +{ + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + return false; + + if (!tk->tkr_mono.clock->archdata.vdso_direct) + return false; + + return true; +} + +/* + * Update the vDSO data page to keep in sync with kernel timekeeping. + */ +static __always_inline +struct vdso_data *__arm_get_k_vdso_data(void) +{ + return vdso_data; +} +#define __arch_get_k_vdso_data __arm_get_k_vdso_data + +static __always_inline +int __arm_update_vdso_data(void) +{ + return !cntvct_ok; +} +#define __arch_update_vdso_data __arm_update_vdso_data + +static __always_inline +int __arm_get_clock_mode(struct timekeeper *tk) +{ + u32 __tk_is_cntvct = tk_is_cntvct(tk); + + return __tk_is_cntvct; +} +#define __arch_get_clock_mode __arm_get_clock_mode + +static __always_inline +int __arm_use_vsyscall(struct vdso_data *vdata) +{ + return vdata[CS_HRES_COARSE].clock_mode; +} +#define __arch_use_vsyscall __arm_use_vsyscall + +static __always_inline +void __arm_sync_vdso_data(struct vdso_data *vdata) +{ + flush_dcache_page(virt_to_page(vdata)); +} +#define __arch_sync_vdso_data __arm_sync_vdso_data + +/* The asm-generic header needs to be included after the definitions above */ +#include <asm-generic/vdso/vsyscall.h> + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_VDSO_VSYSCALL_H */ diff --git a/arch/arm/include/asm/vdso_datapage.h b/arch/arm/include/asm/vdso_datapage.h index 7910abf89b1c..bef68f59928d 100644 --- a/arch/arm/include/asm/vdso_datapage.h +++ b/arch/arm/include/asm/vdso_datapage.h @@ -11,35 +11,12 @@ #ifndef __ASSEMBLY__ +#include <vdso/datapage.h> #include <asm/page.h> -/* Try to be cache-friendly on systems that don't implement the - * generic timer: fit the unconditionally updated fields in the first - * 32 bytes. - */ -struct vdso_data { - u32 seq_count; /* sequence count - odd during updates */ - u16 tk_is_cntvct; /* fall back to syscall if false */ - u16 cs_shift; /* clocksource shift */ - u32 xtime_coarse_sec; /* coarse time */ - u32 xtime_coarse_nsec; - - u32 wtm_clock_sec; /* wall to monotonic offset */ - u32 wtm_clock_nsec; - u32 xtime_clock_sec; /* CLOCK_REALTIME - seconds */ - u32 cs_mult; /* clocksource multiplier */ - - u64 cs_cycle_last; /* last cycle value */ - u64 cs_mask; /* clocksource mask */ - - u64 xtime_clock_snsec; /* CLOCK_REALTIME sub-ns base */ - u32 tz_minuteswest; /* timezone info for gettimeofday(2) */ - u32 tz_dsttime; -}; - union vdso_data_store { - struct vdso_data data; - u8 page[PAGE_SIZE]; + struct vdso_data data[CS_BASES]; + u8 page[PAGE_SIZE]; }; #endif /* !__ASSEMBLY__ */ diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 2769360f195c..03cd7c19a683 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -131,8 +131,9 @@ struct kvm_vcpu_events { struct { __u8 serror_pending; __u8 serror_has_esr; + __u8 ext_dabt_pending; /* Align it to 8 bytes */ - __u8 pad[6]; + __u8 pad[5]; __u64 serror_esr; } exception; __u32 reserved[12]; diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8cad59465af3..8b679e2ca3c3 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -17,10 +17,14 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. obj-y := elf.o entry-common.o irq.o opcodes.o \ - process.o ptrace.o reboot.o return_address.o \ + process.o ptrace.o reboot.o \ setup.o signal.o sigreturn_codes.o \ stacktrace.o sys_arm.o time.o traps.o +ifneq ($(CONFIG_ARM_UNWIND),y) +obj-$(CONFIG_FRAME_POINTER) += return_address.o +endif + obj-$(CONFIG_ATAGS) += atags_parse.o obj-$(CONFIG_ATAGS_PROC) += atags_proc.o obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index c125582de2e7..b5e217907686 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -10,6 +10,7 @@ #include <linux/errno.h> #include <asm/delay.h> +#include <asm/arch_timer.h> #include <clocksource/arm_arch_timer.h> diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index a7810be07da1..4a3982812a40 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -68,7 +68,7 @@ ENDPROC(__vet_atags) * The following fragment of code is executed with the MMU on in MMU mode, * and uses absolute addresses; this is not position independent. * - * r0 = cp#15 control register + * r0 = cp#15 control register (exc_ret for M-class) * r1 = machine ID * r2 = atags/dtb pointer * r9 = processor ID @@ -137,7 +137,8 @@ __mmap_switched_data: #ifdef CONFIG_CPU_CP15 .long cr_alignment @ r3 #else - .long 0 @ r3 +M_CLASS(.long exc_ret) @ r3 +AR_CLASS(.long 0) @ r3 #endif .size __mmap_switched_data, . - __mmap_switched_data diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index afa350f44dea..0fc814bbc34b 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -201,6 +201,8 @@ M_CLASS(streq r3, [r12, #PMSAv8_MAIR1]) bic r0, r0, #V7M_SCB_CCR_IC #endif str r0, [r12, V7M_SCB_CCR] + /* Pass exc_ret to __mmap_switched */ + mov r0, r10 #endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */ ret lr ENDPROC(__after_proc_init) diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index b0c195e3a06d..02ca7adf5375 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -246,6 +246,9 @@ static int enable_monitor_mode(void) case ARM_DEBUG_ARCH_V7_ECP14: case ARM_DEBUG_ARCH_V7_1: case ARM_DEBUG_ARCH_V8: + case ARM_DEBUG_ARCH_V8_1: + case ARM_DEBUG_ARCH_V8_2: + case ARM_DEBUG_ARCH_V8_4: ARM_DBG_WRITE(c0, c2, 2, (dscr | ARM_DSCR_MDBGEN)); isb(); break; diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c index b647741c0ab0..6e626abaefc5 100644 --- a/arch/arm/kernel/module-plts.c +++ b/arch/arm/kernel/module-plts.c @@ -7,6 +7,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/sort.h> +#include <linux/moduleloader.h> #include <asm/cache.h> #include <asm/opcodes.h> diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 9485acc520a4..cea1c27c29cb 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -36,6 +36,8 @@ #include <asm/tls.h> #include <asm/vdso.h> +#include "signal.h" + #if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_STACKPROTECTOR_PER_TASK) #include <linux/stackprotector.h> unsigned long __stack_chk_guard __read_mostly; diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index aba6b2ab7a58..d4392e177484 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -51,7 +51,7 @@ static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle) } #ifdef CONFIG_HOTPLUG_CPU -int psci_cpu_disable(unsigned int cpu) +static int psci_cpu_disable(unsigned int cpu) { /* Fail early if we don't have CPU_OFF support */ if (!psci_ops.cpu_off) @@ -64,7 +64,7 @@ int psci_cpu_disable(unsigned int cpu) return 0; } -void psci_cpu_die(unsigned int cpu) +static void psci_cpu_die(unsigned int cpu) { u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN << PSCI_0_2_POWER_STATE_TYPE_SHIFT; @@ -76,7 +76,7 @@ void psci_cpu_die(unsigned int cpu) panic("psci: cpu %d failed to shutdown\n", cpu); } -int psci_cpu_kill(unsigned int cpu) +static int psci_cpu_kill(unsigned int cpu) { int err, i; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 324352787aea..b606cded90cd 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -923,7 +923,7 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) /* Do seccomp after ptrace; syscall may have changed. */ #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER - if (secure_computing(NULL) == -1) + if (secure_computing() == -1) return -1; #else /* XXX: remove this once OABI gets fixed */ diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index b0d2f1fe891d..7b42ac010fdf 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c @@ -7,8 +7,6 @@ */ #include <linux/export.h> #include <linux/ftrace.h> - -#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) #include <linux/sched.h> #include <asm/stacktrace.h> @@ -53,6 +51,4 @@ void *return_address(unsigned int level) return NULL; } -#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */ - EXPORT_SYMBOL_GPL(return_address); diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index b7b838b05229..cb076d30ab38 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -9,3 +9,5 @@ struct rt_sigframe { struct siginfo info; struct sigframe sig; }; + +extern struct page *get_signal_page(void); diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 9d9b1db73932..d3a85f01b328 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -18,6 +18,7 @@ #include <asm/memory.h> #include <asm/system_info.h> #include <asm/traps.h> +#include <asm/tcm.h> #define TCMTR_FORMAT_MASK 0xe0000000U @@ -30,8 +31,8 @@ extern char __itcm_start, __sitcm_text, __eitcm_text; extern char __dtcm_start, __sdtcm_data, __edtcm_data; /* These will be increased as we run */ -u32 dtcm_end = DTCM_OFFSET; -u32 itcm_end = ITCM_OFFSET; +static u32 dtcm_end = DTCM_OFFSET; +static u32 itcm_end = ITCM_OFFSET; /* * TCM memory resources diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index b996b2cf0703..dddc7ebf4db4 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -9,6 +9,7 @@ * reading the RTC at bootup, etc... */ #include <linux/clk-provider.h> +#include <linux/clockchips.h> #include <linux/clocksource.h> #include <linux/errno.h> #include <linux/export.h> @@ -107,5 +108,6 @@ void __init time_init(void) of_clk_init(NULL); #endif timer_probe(); + tick_setup_hrtimer_broadcast(); } } diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 5b9faba03afb..3a4dde081c13 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -95,7 +95,7 @@ static void __init parse_dt_topology(void) GFP_NOWAIT); for_each_possible_cpu(cpu) { - const u32 *rate; + const __be32 *rate; int len; /* too early to use cpu->of_node */ diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index 9bf16c93ee6a..c89ac1b9d28b 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -23,6 +23,8 @@ #include <asm/vdso.h> #include <asm/vdso_datapage.h> #include <clocksource/arm_arch_timer.h> +#include <vdso/helpers.h> +#include <vdso/vsyscall.h> #define MAX_SYMNAME 64 @@ -37,7 +39,7 @@ unsigned int vdso_total_pages __ro_after_init; * The VDSO data page. */ static union vdso_data_store vdso_data_store __page_aligned_data; -static struct vdso_data *vdso_data = &vdso_data_store.data; +struct vdso_data *vdso_data = vdso_data_store.data; static struct page *vdso_data_page __ro_after_init; static const struct vm_special_mapping vdso_data_mapping = { @@ -77,7 +79,7 @@ struct elfinfo { /* Cached result of boot-time check for whether the arch timer exists, * and if so, whether the virtual counter is useable. */ -static bool cntvct_ok __ro_after_init; +bool cntvct_ok __ro_after_init; static bool __init cntvct_functional(void) { @@ -262,84 +264,3 @@ void arm_install_vdso(struct mm_struct *mm, unsigned long addr) mm->context.vdso = addr; } -static void vdso_write_begin(struct vdso_data *vdata) -{ - ++vdso_data->seq_count; - smp_wmb(); /* Pairs with smp_rmb in vdso_read_retry */ -} - -static void vdso_write_end(struct vdso_data *vdata) -{ - smp_wmb(); /* Pairs with smp_rmb in vdso_read_begin */ - ++vdso_data->seq_count; -} - -static bool tk_is_cntvct(const struct timekeeper *tk) -{ - if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) - return false; - - if (!tk->tkr_mono.clock->archdata.vdso_direct) - return false; - - return true; -} - -/** - * update_vsyscall - update the vdso data page - * - * Increment the sequence counter, making it odd, indicating to - * userspace that an update is in progress. Update the fields used - * for coarse clocks and, if the architected system timer is in use, - * the fields used for high precision clocks. Increment the sequence - * counter again, making it even, indicating to userspace that the - * update is finished. - * - * Userspace is expected to sample seq_count before reading any other - * fields from the data page. If seq_count is odd, userspace is - * expected to wait until it becomes even. After copying data from - * the page, userspace must sample seq_count again; if it has changed - * from its previous value, userspace must retry the whole sequence. - * - * Calls to update_vsyscall are serialized by the timekeeping core. - */ -void update_vsyscall(struct timekeeper *tk) -{ - struct timespec64 *wtm = &tk->wall_to_monotonic; - - if (!cntvct_ok) { - /* The entry points have been zeroed, so there is no - * point in updating the data page. - */ - return; - } - - vdso_write_begin(vdso_data); - - vdso_data->tk_is_cntvct = tk_is_cntvct(tk); - vdso_data->xtime_coarse_sec = tk->xtime_sec; - vdso_data->xtime_coarse_nsec = (u32)(tk->tkr_mono.xtime_nsec >> - tk->tkr_mono.shift); - vdso_data->wtm_clock_sec = wtm->tv_sec; - vdso_data->wtm_clock_nsec = wtm->tv_nsec; - - if (vdso_data->tk_is_cntvct) { - vdso_data->cs_cycle_last = tk->tkr_mono.cycle_last; - vdso_data->xtime_clock_sec = tk->xtime_sec; - vdso_data->xtime_clock_snsec = tk->tkr_mono.xtime_nsec; - vdso_data->cs_mult = tk->tkr_mono.mult; - vdso_data->cs_shift = tk->tkr_mono.shift; - vdso_data->cs_mask = tk->tkr_mono.mask; - } - - vdso_write_end(vdso_data); - - flush_dcache_page(virt_to_page(vdso_data)); -} - -void update_vsyscall_tz(void) -{ - vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; - vdso_data->tz_dsttime = sys_tz.tz_dsttime; - flush_dcache_page(virt_to_page(vdso_data)); -} diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 8c74037ade22..21b8b271c80d 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -70,8 +70,6 @@ SECTIONS ARM_UNWIND_SECTIONS #endif - NOTES - _etext = .; /* End of text and rodata section */ ARM_VECTORS @@ -114,7 +112,7 @@ SECTIONS . = ALIGN(THREAD_SIZE); _sdata = .; - RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) { *(.data..ro_after_init) } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 23150c0f0f4d..319ccb10846a 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -81,8 +81,6 @@ SECTIONS ARM_UNWIND_SECTIONS #endif - NOTES - #ifdef CONFIG_STRICT_KERNEL_RWX . = ALIGN(1<<SECTION_SHIFT); #else @@ -143,7 +141,7 @@ SECTIONS __init_end = .; _sdata = .; - RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) _edata = .; BSS_SECTION(0, 0, 0) diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index b76b75bd9e00..e442d82821df 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -24,7 +24,7 @@ obj-y += kvm-arm.o init.o interrupts.o obj-y += handle_exit.o guest.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o vgic-v3-coproc.o obj-y += $(KVM)/arm/arm.o $(KVM)/arm/mmu.o $(KVM)/arm/mmio.o -obj-y += $(KVM)/arm/psci.o $(KVM)/arm/perf.o +obj-y += $(KVM)/arm/psci.o $(KVM)/arm/perf.o $(KVM)/arm/hypercalls.o obj-y += $(KVM)/arm/aarch32.o obj-y += $(KVM)/arm/vgic/vgic.o diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 684cf64b4033..0e6f23504c26 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -21,6 +21,10 @@ #define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU } struct kvm_stats_debugfs_item debugfs_entries[] = { + VCPU_STAT(halt_successful_poll), + VCPU_STAT(halt_attempted_poll), + VCPU_STAT(halt_poll_invalid), + VCPU_STAT(halt_wakeup), VCPU_STAT(hvc_exit_stat), VCPU_STAT(wfe_exit_stat), VCPU_STAT(wfi_exit_stat), @@ -255,6 +259,12 @@ int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu, { events->exception.serror_pending = !!(*vcpu_hcr(vcpu) & HCR_VA); + /* + * We never return a pending ext_dabt here because we deliver it to + * the virtual CPU directly when setting the event and it's no longer + * 'pending' at this point. + */ + return 0; } @@ -263,12 +273,16 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, { bool serror_pending = events->exception.serror_pending; bool has_esr = events->exception.serror_has_esr; + bool ext_dabt_pending = events->exception.ext_dabt_pending; if (serror_pending && has_esr) return -EINVAL; else if (serror_pending) kvm_inject_vabt(vcpu); + if (ext_dabt_pending) + kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu)); + return 0; } diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 2a6a1394d26e..e58a89d2f13f 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -9,7 +9,7 @@ #include <asm/kvm_emulate.h> #include <asm/kvm_coproc.h> #include <asm/kvm_mmu.h> -#include <kvm/arm_psci.h> +#include <kvm/arm_hypercalls.h> #include <trace/events/kvm.h> #include "trace.h" diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 5e5f1fabc3d4..e4e25f287ad7 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -161,6 +161,8 @@ config ARCH_BCM2835 select GPIOLIB select ARM_AMBA select ARM_ERRATA_411920 if ARCH_MULTI_V6 + select ARM_GIC if ARCH_MULTI_V7 + select ZONE_DMA if ARCH_MULTI_V7 select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select TIMER_OF @@ -169,7 +171,7 @@ config ARCH_BCM2835 select PINCTRL_BCM2835 select MFD_CORE help - This enables support for the Broadcom BCM2835 and BCM2836 SoCs. + This enables support for the Broadcom BCM2711 and BCM283x SoCs. This SoC is used in the Raspberry Pi and Roku 2 devices. config ARCH_BCM_53573 diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index b59c813b1af4..7baa8c9427d5 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -42,8 +42,9 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o # BCM2835 -obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o ifeq ($(CONFIG_ARCH_BCM2835),y) +obj-y += board_bcm2835.o +obj-y += bcm2711.o ifeq ($(CONFIG_ARM),y) obj-$(CONFIG_SMP) += platsmp.o endif diff --git a/arch/arm/mach-bcm/bcm2711.c b/arch/arm/mach-bcm/bcm2711.c new file mode 100644 index 000000000000..dbe296798647 --- /dev/null +++ b/arch/arm/mach-bcm/bcm2711.c @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Stefan Wahren + */ + +#include <linux/of_address.h> + +#include <asm/mach/arch.h> + +#include "platsmp.h" + +static const char * const bcm2711_compat[] = { +#ifdef CONFIG_ARCH_MULTI_V7 + "brcm,bcm2711", +#endif +}; + +DT_MACHINE_START(BCM2711, "BCM2711") +#ifdef CONFIG_ZONE_DMA + .dma_zone_size = SZ_1G, +#endif + .dt_compat = bcm2711_compat, + .smp = smp_ops(bcm2836_smp_ops), +MACHINE_END diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index 541e850a736c..43a16f922b53 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -140,7 +140,7 @@ static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys) static void __bcm_kona_smc(void *info) { struct bcm_kona_smc_data *data = info; - u32 *args = bcm_smc_buffer; + u32 __iomem *args = bcm_smc_buffer; BUG_ON(smp_processor_id() != 0); BUG_ON(!args); diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 47f8053d0240..21400b3fa5fe 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -22,6 +22,8 @@ #include <asm/smp_plat.h> #include <asm/smp_scu.h> +#include "platsmp.h" + /* Size of mapped Cortex A9 SCU address space */ #define CORTEX_A9_SCU_SIZE 0x58 diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 9dab1f50a02f..4ef56571145b 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -13,6 +13,7 @@ menuconfig ARCH_EXYNOS select ARM_AMBA select ARM_GIC select COMMON_CLK_SAMSUNG + select EXYNOS_ASV select EXYNOS_CHIPID select EXYNOS_THERMAL select EXYNOS_PMU diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 8b81a17f675d..416462e3f5d6 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -31,7 +31,6 @@ PCI_STATUS_PARITY) << 16) extern int setup_arm_irq(int, struct irqaction *); -extern void pcibios_report_status(u_int status_mask, int warn); static unsigned long dc21285_base_address(struct pci_bus *bus, unsigned int devfn) diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 98338a489921..3b010fe7c0e9 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -15,7 +15,6 @@ menu "Hisilicon platform type" config ARCH_HI3xxx bool "Hisilicon Hi36xx family" - depends on ARCH_MULTI_V7 select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -25,17 +24,15 @@ config ARCH_HI3xxx Support for Hisilicon Hi36xx SoC family config ARCH_HIP01 - bool "Hisilicon HIP01 family" - depends on ARCH_MULTI_V7 - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select ARM_GLOBAL_TIMER - help - Support for Hisilicon HIP01 SoC family + bool "Hisilicon HIP01 family" + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select ARM_GLOBAL_TIMER + help + Support for Hisilicon HIP01 SoC family config ARCH_HIP04 bool "Hisilicon HiP04 Cortex A15 family" - depends on ARCH_MULTI_V7 select ARM_ERRATA_798181 if SMP select HAVE_ARM_ARCH_TIMER select MCPM if SMP @@ -46,7 +43,6 @@ config ARCH_HIP04 config ARCH_HIX5HD2 bool "Hisilicon X5HD2 family" - depends on ARCH_MULTI_V7 select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 777d8c255501..8fb68c0ec34c 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -19,8 +19,6 @@ #define ANADIG_REG_2P5 0x130 #define ANADIG_REG_CORE 0x140 #define ANADIG_ANA_MISC0 0x150 -#define ANADIG_USB1_CHRG_DETECT 0x1b0 -#define ANADIG_USB2_CHRG_DETECT 0x210 #define ANADIG_DIGPROG 0x260 #define ANADIG_DIGPROG_IMX6SL 0x280 #define ANADIG_DIGPROG_IMX7D 0x800 @@ -33,8 +31,6 @@ #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000 /* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */ #define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS 0x2000 -#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000 -#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000 static struct regmap *anatop; @@ -96,16 +92,6 @@ void imx_anatop_post_resume(void) } -static void imx_anatop_usb_chrg_detect_disable(void) -{ - regmap_write(anatop, ANADIG_USB1_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B - | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); - regmap_write(anatop, ANADIG_USB2_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B | - BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); -} - void __init imx_init_revision_from_anatop(void) { struct device_node *np; @@ -171,10 +157,6 @@ void __init imx_init_revision_from_anatop(void) void __init imx_anatop_init(void) { anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); - if (IS_ERR(anatop)) { + if (IS_ERR(anatop)) pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__); - return; - } - - imx_anatop_usb_chrg_detect_disable(); } diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 0b137eeffb61..d8118031c51f 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -1,15 +1,20 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/err.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <linux/sys_soc.h> #include "hardware.h" #include "common.h" +#define OCOTP_UID_H 0x420 +#define OCOTP_UID_L 0x410 + unsigned int __mxc_cpu_type; static unsigned int imx_soc_revision; @@ -76,9 +81,13 @@ void __init imx_aips_allow_unprivileged_access( struct device * __init imx_soc_device_init(void) { struct soc_device_attribute *soc_dev_attr; + const char *ocotp_compat = NULL; struct soc_device *soc_dev; struct device_node *root; + struct regmap *ocotp; const char *soc_id; + u64 soc_uid = 0; + u32 val; int ret; soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); @@ -119,30 +128,39 @@ struct device * __init imx_soc_device_init(void) soc_id = "i.MX53"; break; case MXC_CPU_IMX6SL: + ocotp_compat = "fsl,imx6sl-ocotp"; soc_id = "i.MX6SL"; break; case MXC_CPU_IMX6DL: + ocotp_compat = "fsl,imx6q-ocotp"; soc_id = "i.MX6DL"; break; case MXC_CPU_IMX6SX: + ocotp_compat = "fsl,imx6sx-ocotp"; soc_id = "i.MX6SX"; break; case MXC_CPU_IMX6Q: + ocotp_compat = "fsl,imx6q-ocotp"; soc_id = "i.MX6Q"; break; case MXC_CPU_IMX6UL: + ocotp_compat = "fsl,imx6ul-ocotp"; soc_id = "i.MX6UL"; break; case MXC_CPU_IMX6ULL: + ocotp_compat = "fsl,imx6ul-ocotp"; soc_id = "i.MX6ULL"; break; case MXC_CPU_IMX6ULZ: + ocotp_compat = "fsl,imx6ul-ocotp"; soc_id = "i.MX6ULZ"; break; case MXC_CPU_IMX6SLL: + ocotp_compat = "fsl,imx6sll-ocotp"; soc_id = "i.MX6SLL"; break; case MXC_CPU_IMX7D: + ocotp_compat = "fsl,imx7d-ocotp"; soc_id = "i.MX7D"; break; case MXC_CPU_IMX7ULP: @@ -153,18 +171,36 @@ struct device * __init imx_soc_device_init(void) } soc_dev_attr->soc_id = soc_id; + if (ocotp_compat) { + ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat); + if (IS_ERR(ocotp)) + pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat); + + regmap_read(ocotp, OCOTP_UID_H, &val); + soc_uid = val; + regmap_read(ocotp, OCOTP_UID_L, &val); + soc_uid <<= 32; + soc_uid |= val; + } + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d", (imx_soc_revision >> 4) & 0xf, imx_soc_revision & 0xf); if (!soc_dev_attr->revision) goto free_soc; + soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid); + if (!soc_dev_attr->serial_number) + goto free_rev; + soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) - goto free_rev; + goto free_serial_number; return soc_device_to_device(soc_dev); +free_serial_number: + kfree(soc_dev_attr->serial_number); free_rev: kfree(soc_dev_attr->revision); free_soc: diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 39a7d9393641..24dd5bbe60e4 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -62,13 +62,13 @@ static struct cpuidle_driver imx6q_cpuidle_driver = { */ void imx6q_cpuidle_fec_irqs_used(void) { - imx6q_cpuidle_driver.states[1].disabled = true; + cpuidle_driver_state_disabled(&imx6q_cpuidle_driver, 1, true); } EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_used); void imx6q_cpuidle_fec_irqs_unused(void) { - imx6q_cpuidle_driver.states[1].disabled = false; + cpuidle_driver_state_disabled(&imx6q_cpuidle_driver, 1, false); } EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused); diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 089d11ffaa3e..82e22398d43d 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -6,32 +6,12 @@ #include <linux/errno.h> #include <linux/jiffies.h> +#include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/proc-fns.h> #include "common.h" -static inline void cpu_enter_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %3\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -39,7 +19,7 @@ static inline void cpu_enter_lowpower(void) */ void imx_cpu_die(unsigned int cpu) { - cpu_enter_lowpower(); + v7_exit_coherency_flush(louis); /* * We use the cpu jumping argument register to sync with * imx_cpu_kill() which is running on cpu0 and waiting for diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 0440109e973b..b58a03b18bde 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,13 +1,13 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MMP - bool "Marvell PXA168/910/MMP2" + bool "Marvell PXA168/910/MMP2/MMP3" depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 select GPIO_PXA select GPIOLIB select PINCTRL select PLAT_PXA help - Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. + Support for Marvell's PXA168/PXA910(MMP), MMP2, and MMP3 processor lines. if ARCH_MMP @@ -129,6 +129,24 @@ config MACH_MMP2_DT Include support for Marvell MMP2 based platforms using the device tree. +config MACH_MMP3_DT + bool "Support MMP3 (ARMv7) platforms" + depends on ARCH_MULTI_V7 + select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select CACHE_L2X0 + select PINCTRL + select PINCTRL_SINGLE + select ARCH_HAS_RESET_CONTROLLER + select CPU_PJ4B + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM && OF + help + Say 'Y' here if you want to include support for platforms + with Marvell MMP3 processor, also known as PXA2128 or + Armada 620. + endmenu config CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 8f267c7bc6e8..7b3a7f979eec 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -22,6 +22,9 @@ ifeq ($(CONFIG_PM),y) obj-$(CONFIG_CPU_PXA910) += pm-pxa910.o obj-$(CONFIG_CPU_MMP2) += pm-mmp2.o endif +ifeq ($(CONFIG_SMP),y) +obj-$(CONFIG_MACH_MMP3_DT) += platsmp.o +endif # board support obj-$(CONFIG_MACH_ASPENITE) += aspenite.o @@ -34,5 +37,6 @@ obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o obj-$(CONFIG_MACH_MMP2_DT) += mmp2-dt.o +obj-$(CONFIG_MACH_MMP3_DT) += mmp3.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o obj-$(CONFIG_MACH_GPLUGD) += gplugd.o diff --git a/arch/arm/mach-mmp/addr-map.h b/arch/arm/mach-mmp/addr-map.h index 25edf6a92276..3dc2f0b0ecba 100644 --- a/arch/arm/mach-mmp/addr-map.h +++ b/arch/arm/mach-mmp/addr-map.h @@ -20,6 +20,10 @@ #define AXI_VIRT_BASE IOMEM(0xfe200000) #define AXI_PHYS_SIZE 0x00200000 +#define PGU_PHYS_BASE 0xe0000000 +#define PGU_VIRT_BASE IOMEM(0xfe400000) +#define PGU_PHYS_SIZE 0x00100000 + /* Static Memory Controller - Chip Select 0 and 1 */ #define SMC_CS0_PHYS_BASE 0x80000000 #define SMC_CS0_PHYS_SIZE 0x10000000 @@ -38,4 +42,7 @@ #define CIU_VIRT_BASE (AXI_VIRT_BASE + 0x82c00) #define CIU_REG(x) (CIU_VIRT_BASE + (x)) +#define SCU_VIRT_BASE (PGU_VIRT_BASE) +#define SCU_REG(x) (SCU_VIRT_BASE + (x)) + #endif /* __ASM_MACH_ADDR_MAP_H */ diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 6684abc7708b..e94349d4726c 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -13,11 +13,11 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include "addr-map.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "common.h" -#define MMP_CHIPID (AXI_VIRT_BASE + 0x82c00) +#define MMP_CHIPID CIU_REG(0x00) unsigned int mmp_chip_id; EXPORT_SYMBOL(mmp_chip_id); @@ -36,6 +36,15 @@ static struct map_desc standard_io_desc[] __initdata = { }, }; +static struct map_desc mmp2_io_desc[] __initdata = { + { + .pfn = __phys_to_pfn(PGU_PHYS_BASE), + .virtual = (unsigned long)PGU_VIRT_BASE, + .length = PGU_PHYS_SIZE, + .type = MT_DEVICE, + }, +}; + void __init mmp_map_io(void) { iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); @@ -44,6 +53,12 @@ void __init mmp_map_io(void) mmp_chip_id = __raw_readl(MMP_CHIPID); } +void __init mmp2_map_io(void) +{ + mmp_map_io(); + iotable_init(mmp2_io_desc, ARRAY_SIZE(mmp2_io_desc)); +} + void mmp_restart(enum reboot_mode mode, const char *cmd) { soft_restart(0); diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index 483b8b6d3005..ed56b3f15b45 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -5,4 +5,5 @@ extern void mmp_timer_init(int irq, unsigned long rate); extern void __init mmp_map_io(void); +extern void __init mmp2_map_io(void); extern void mmp_restart(enum reboot_mode, const char *); diff --git a/arch/arm/mach-mmp/cputype.h b/arch/arm/mach-mmp/cputype.h deleted file mode 100644 index a96abcf521b4..000000000000 --- a/arch/arm/mach-mmp/cputype.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_MACH_CPUTYPE_H -#define __ASM_MACH_CPUTYPE_H - -#include <asm/cputype.h> - -/* - * CPU Stepping CPU_ID CHIP_ID - * - * PXA168 S0 0x56158400 0x0000C910 - * PXA168 A0 0x56158400 0x00A0A168 - * PXA910 Y1 0x56158400 0x00F2C920 - * PXA910 A0 0x56158400 0x00F2C910 - * PXA910 A1 0x56158400 0x00A0C910 - * PXA920 Y0 0x56158400 0x00F2C920 - * PXA920 A0 0x56158400 0x00A0C920 - * PXA920 A1 0x56158400 0x00A1C920 - * MMP2 Z0 0x560f5811 0x00F00410 - * MMP2 Z1 0x560f5811 0x00E00410 - * MMP2 A0 0x560f5811 0x00A0A610 - */ - -extern unsigned int mmp_chip_id; - -#ifdef CONFIG_CPU_PXA168 -static inline int cpu_is_pxa168(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - ((mmp_chip_id & 0xfff) == 0x168); -} -#else -#define cpu_is_pxa168() (0) -#endif - -/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */ -#ifdef CONFIG_CPU_PXA910 -static inline int cpu_is_pxa910(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - (((mmp_chip_id & 0xfff) == 0x910) || - ((mmp_chip_id & 0xfff) == 0x920)); -} -#else -#define cpu_is_pxa910() (0) -#endif - -#if defined(CONFIG_CPU_MMP2) || defined(CONFIG_MACH_MMP2_DT) -static inline int cpu_is_mmp2(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x58) && - (((mmp_chip_id & 0xfff) == 0x410) || - ((mmp_chip_id & 0xfff) == 0x610)); -} -#else -#define cpu_is_mmp2() (0) -#endif - -#endif /* __ASM_MACH_CPUTYPE_H */ diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 130c1a603ba2..18bee66a671f 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -11,7 +11,7 @@ #include <asm/irq.h> #include "irqs.h" #include "devices.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "regs-usb.h" int __init pxa_register_device(struct pxa_device_desc *desc, diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index 35559792d5cc..91214996acec 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -9,14 +9,13 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/hardware/cache-tauros2.h> #include "common.h" -extern void __init mmp_dt_init_timer(void); - static const char *const pxa168_dt_board_compat[] __initconst = { "mrvl,pxa168-aspenite", NULL, @@ -32,8 +31,8 @@ static void __init mmp_init_time(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - mmp_dt_init_timer(); of_clk_init(NULL); + timer_probe(); } DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)") diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index 305a9daba6d6..510c762ddc48 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -10,21 +10,20 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/hardware/cache-tauros2.h> #include "common.h" -extern void __init mmp_dt_init_timer(void); - static void __init mmp_init_time(void) { #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif of_clk_init(NULL); - mmp_dt_init_timer(); + timer_probe(); } static const char *const mmp2_dt_board_compat[] __initconst = { @@ -33,7 +32,7 @@ static const char *const mmp2_dt_board_compat[] __initconst = { }; DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)") - .map_io = mmp_map_io, + .map_io = mmp2_map_io, .init_time = mmp_init_time, .dt_compat = mmp2_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 18ea3e1a26e6..bbc4c2274de3 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -20,7 +20,7 @@ #include <asm/mach/time.h> #include "addr-map.h" #include "regs-apbc.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "irqs.h" #include "mfp.h" #include "devices.h" diff --git a/arch/arm/mach-mmp/mmp3.c b/arch/arm/mach-mmp/mmp3.c new file mode 100644 index 000000000000..b0e86964f302 --- /dev/null +++ b/arch/arm/mach-mmp/mmp3.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Marvell MMP3 aka PXA2128 aka 88AP2128 support + * + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +#include <linux/io.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/clk-provider.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> + +#include "common.h" + +static const char *const mmp3_dt_board_compat[] __initconst = { + "marvell,mmp3", + NULL, +}; + +DT_MACHINE_START(MMP2_DT, "Marvell MMP3") + .map_io = mmp2_map_io, + .dt_compat = mmp3_dt_board_compat, + .l2c_aux_val = 1 << L310_AUX_CTRL_FWA_SHIFT | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH, + .l2c_aux_mask = 0xc20fffff, +MACHINE_END diff --git a/arch/arm/mach-mmp/platsmp.c b/arch/arm/mach-mmp/platsmp.c new file mode 100644 index 000000000000..c99405469bb4 --- /dev/null +++ b/arch/arm/mach-mmp/platsmp.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ +#include <linux/io.h> +#include <asm/smp_scu.h> +#include <asm/smp.h> +#include "addr-map.h" + +#define SW_BRANCH_VIRT_ADDR CIU_REG(0x24) + +static int mmp3_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + /* + * Apparently, the boot ROM on the second core spins on this + * register becoming non-zero and then jumps to the address written + * there. No IPIs involved. + */ + __raw_writel(__pa_symbol(secondary_startup), SW_BRANCH_VIRT_ADDR); + return 0; +} + +static void mmp3_smp_prepare_cpus(unsigned int max_cpus) +{ + scu_enable(SCU_VIRT_BASE); +} + +static const struct smp_operations mmp3_smp_ops __initconst = { + .smp_prepare_cpus = mmp3_smp_prepare_cpus, + .smp_boot_secondary = mmp3_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(mmp3_smp, "marvell,mmp3-smp", &mmp3_smp_ops); diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c index 2923dd5732a6..2d86381e152d 100644 --- a/arch/arm/mach-mmp/pm-mmp2.c +++ b/arch/arm/mach-mmp/pm-mmp2.c @@ -17,7 +17,7 @@ #include <linux/interrupt.h> #include <asm/mach-types.h> -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "addr-map.h" #include "pm-mmp2.h" #include "regs-icu.h" diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c index 58535ce206dc..69ebe18ff209 100644 --- a/arch/arm/mach-mmp/pm-pxa910.c +++ b/arch/arm/mach-mmp/pm-pxa910.c @@ -18,7 +18,7 @@ #include <asm/mach-types.h> #include <asm/outercache.h> -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "addr-map.h" #include "pm-pxa910.h" #include "regs-icu.h" diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 6e0277488967..b642e900727a 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -21,7 +21,7 @@ #include "addr-map.h" #include "clock.h" #include "common.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "devices.h" #include "irqs.h" #include "mfp.h" diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index cba31c758dea..b19a069d9fab 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -18,7 +18,7 @@ #include <asm/mach/time.h> #include "addr-map.h" #include "regs-apbc.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "irqs.h" #include "mfp.h" #include "devices.h" diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h index d9f08c160154..ed0d1aa0ad6c 100644 --- a/arch/arm/mach-mmp/regs-usb.h +++ b/arch/arm/mach-mmp/regs-usb.h @@ -121,100 +121,6 @@ #define UTMI_OTG_ADDON_OTG_ON (1 << 0) -/* For MMP3 USB Phy */ -#define USB2_PLL_REG0 0x4 -#define USB2_PLL_REG1 0x8 -#define USB2_TX_REG0 0x10 -#define USB2_TX_REG1 0x14 -#define USB2_TX_REG2 0x18 -#define USB2_RX_REG0 0x20 -#define USB2_RX_REG1 0x24 -#define USB2_RX_REG2 0x28 -#define USB2_ANA_REG0 0x30 -#define USB2_ANA_REG1 0x34 -#define USB2_ANA_REG2 0x38 -#define USB2_DIG_REG0 0x3C -#define USB2_DIG_REG1 0x40 -#define USB2_DIG_REG2 0x44 -#define USB2_DIG_REG3 0x48 -#define USB2_TEST_REG0 0x4C -#define USB2_TEST_REG1 0x50 -#define USB2_TEST_REG2 0x54 -#define USB2_CHARGER_REG0 0x58 -#define USB2_OTG_REG0 0x5C -#define USB2_PHY_MON0 0x60 -#define USB2_RESETVE_REG0 0x64 -#define USB2_ICID_REG0 0x78 -#define USB2_ICID_REG1 0x7C - -/* USB2_PLL_REG0 */ -/* This is for Ax stepping */ -#define USB2_PLL_FBDIV_SHIFT_MMP3 0 -#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) - -#define USB2_PLL_REFDIV_SHIFT_MMP3 8 -#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) - -#define USB2_PLL_VDD12_SHIFT_MMP3 12 -#define USB2_PLL_VDD18_SHIFT_MMP3 14 - -/* This is for B0 stepping */ -#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 -#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 -#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 -#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF -#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 - -#define USB2_PLL_CAL12_SHIFT_MMP3 0 -#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) - -#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 - -#define USB2_PLL_KVCO_SHIFT_MMP3 4 -#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) - -#define USB2_PLL_ICP_SHIFT_MMP3 8 -#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) - -#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 - -#define USB2_PLL_PU_PLL_SHIFT_MMP3 13 -#define USB2_PLL_PU_PLL_MASK (0x1 << 13) - -#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) - -/* USB2_TX_REG0 */ -#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 -#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) - -#define USB2_TX_RCAL_START_SHIFT_MMP3 13 - -/* USB2_TX_REG1 */ -#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 -#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) - -#define USB2_TX_AMP_SHIFT_MMP3 4 -#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) - -#define USB2_TX_VDD12_SHIFT_MMP3 8 -#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) - -/* USB2_TX_REG2 */ -#define USB2_TX_DRV_SLEWRATE_SHIFT 10 - -/* USB2_RX_REG0 */ -#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 -#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) - -#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 -#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) - -/* USB2_ANA_REG1*/ -#define USB2_ANA_PU_ANA_SHIFT_MMP3 14 - -/* USB2_OTG_REG0 */ -#define USB2_OTG_PU_OTG_SHIFT_MMP3 3 - /* fsic registers */ #define FSIC_MISC 0x4 #define FSIC_INT 0x28 diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 483df32583be..110dcb3314d1 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -33,7 +33,7 @@ #include "regs-timers.h" #include "regs-apbc.h" #include "irqs.h" -#include "cputype.h" +#include <linux/soc/mmp/cputype.h> #include "clock.h" #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE @@ -155,7 +155,8 @@ static void __init timer_config(void) __raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */ - ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : + ccr &= (cpu_is_mmp2() || cpu_is_mmp3()) ? + (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3)); __raw_writel(ccr, mmp_timer_base + TMR_CCR); @@ -195,30 +196,17 @@ void __init mmp_timer_init(int irq, unsigned long rate) clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA); } -#ifdef CONFIG_OF -static const struct of_device_id mmp_timer_dt_ids[] = { - { .compatible = "mrvl,mmp-timer", }, - {} -}; - -void __init mmp_dt_init_timer(void) +static int __init mmp_dt_init_timer(struct device_node *np) { - struct device_node *np; struct clk *clk; int irq, ret; unsigned long rate; - np = of_find_matching_node(NULL, mmp_timer_dt_ids); - if (!np) { - ret = -ENODEV; - goto out; - } - clk = of_clk_get(np, 0); if (!IS_ERR(clk)) { ret = clk_prepare_enable(clk); if (ret) - goto out; + return ret; rate = clk_get_rate(clk) / 2; } else if (cpu_is_pj4()) { rate = 6500000; @@ -227,18 +215,15 @@ void __init mmp_dt_init_timer(void) } irq = irq_of_parse_and_map(np, 0); - if (!irq) { - ret = -EINVAL; - goto out; - } + if (!irq) + return -EINVAL; + mmp_timer_base = of_iomap(np, 0); - if (!mmp_timer_base) { - ret = -ENOMEM; - goto out; - } + if (!mmp_timer_base) + return -ENOMEM; + mmp_timer_init(irq, rate); - return; -out: - pr_err("Failed to get timer from device tree with error:%d\n", ret); + return 0; } -#endif + +TIMER_OF_DECLARE(mmp_timer, "mrvl,mmp-timer", mmp_dt_init_timer); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 2a17dc1d122c..948da556162e 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -4,30 +4,25 @@ if ARCH_OMAP1 menu "TI OMAP1 specific features" comment "OMAP Core Type" - depends on ARCH_OMAP1 config ARCH_OMAP730 - depends on ARCH_OMAP1 bool "OMAP730 Based System" select ARCH_OMAP_OTG select CPU_ARM926T select OMAP_MPU_TIMER config ARCH_OMAP850 - depends on ARCH_OMAP1 bool "OMAP850 Based System" select ARCH_OMAP_OTG select CPU_ARM926T config ARCH_OMAP15XX - depends on ARCH_OMAP1 default y bool "OMAP15xx Based System" select CPU_ARM925T select OMAP_MPU_TIMER config ARCH_OMAP16XX - depends on ARCH_OMAP1 bool "OMAP16xx Based System" select ARCH_OMAP_OTG select CPU_ARM926T @@ -35,7 +30,6 @@ config ARCH_OMAP16XX config OMAP_MUX bool "OMAP multiplexing support" - depends on ARCH_OMAP default y help Pin multiplexing support for OMAP boards. If your bootloader @@ -60,25 +54,24 @@ config OMAP_MUX_WARNINGS printed, it's safe to deselect OMAP_MUX for your product. comment "OMAP Board Type" - depends on ARCH_OMAP1 config MACH_OMAP_INNOVATOR bool "TI Innovator" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) + depends on ARCH_OMAP15XX || ARCH_OMAP16XX help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. config MACH_OMAP_H2 bool "TI H2 Support" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. config MACH_OMAP_H3 bool "TI H3 Support" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help TI OMAP 1710 H3 board support. Say Y here if you have such a board. @@ -91,7 +84,7 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. @@ -106,21 +99,21 @@ config OMAP_OSK_MISTRAL config MACH_OMAP_PERSEUS2 bool "TI Perseus2" - depends on ARCH_OMAP1 && ARCH_OMAP730 + depends on ARCH_OMAP730 help Support for TI OMAP 730 Perseus2 board. Say Y here if you have such a board. config MACH_OMAP_FSAMPLE bool "TI F-Sample" - depends on ARCH_OMAP1 && ARCH_OMAP730 + depends on ARCH_OMAP730 help Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board. config MACH_OMAP_PALMTE bool "Palm Tungsten E" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX help Support for the Palm Tungsten E PDA. To boot the kernel, you'll need a PalmOS compatible bootloader; check out @@ -129,7 +122,7 @@ config MACH_OMAP_PALMTE config MACH_OMAP_PALMZ71 bool "Palm Zire71" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX help Support for the Palm Zire71 PDA. To boot the kernel, you'll need a PalmOS compatible bootloader; check out @@ -138,7 +131,7 @@ config MACH_OMAP_PALMZ71 config MACH_OMAP_PALMTT bool "Palm Tungsten|T" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX help Support for the Palm Tungsten|T PDA. To boot the kernel, you'll need a PalmOS compatible bootloader (Garux); check out @@ -147,7 +140,7 @@ config MACH_OMAP_PALMTT config MACH_SX1 bool "Siemens SX1" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX select I2C help Support for the Siemens SX1 phone. To boot the kernel, @@ -159,14 +152,14 @@ config MACH_SX1 config MACH_NOKIA770 bool "Nokia 770" - depends on ARCH_OMAP1 && ARCH_OMAP16XX + depends on ARCH_OMAP16XX help Support for the Nokia 770 Internet Tablet. Say Y here if you have such a device. config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" - depends on ARCH_OMAP1 && ARCH_OMAP15XX + depends on ARCH_OMAP15XX select FIQ select GPIO_GENERIC_PLATFORM select LEDS_GPIO_REGISTER @@ -178,7 +171,7 @@ config MACH_AMS_DELTA config MACH_OMAP_GENERIC bool "Generic OMAP board" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) + depends on ARCH_OMAP15XX || ARCH_OMAP16XX help Support for generic OMAP-1510, 1610 or 1710 board with no FPGA. Can be used as template for porting Linux to diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 0254eb9cf8c6..4eea3e39e633 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -110,7 +110,7 @@ void __init ams_delta_init_fiq(struct gpio_chip *chip, /* * FIQ handler takes full control over serio data and clk GPIO - * pins. Initiaize them and keep requested so nobody can + * pins. Initialize them and keep requested so nobody can * interfere. Fail if any of those two couldn't be requested. */ switch (i) { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index fdb6743760a2..ad08d470a2ca 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -109,6 +109,7 @@ config ARCH_OMAP2PLUS select TI_SYSC select OMAP_IRQCHIP select CLKSRC_TI_32K + select ARCH_HAS_RESET_CONTROLLER help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8f208197988f..f07cfda85156 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -29,6 +29,11 @@ obj-y += mcbsp.o endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o + +ifneq ($(CONFIG_MFD_CPCAP),) +obj-y += pmic-cpcap.o +endif + obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 @@ -216,9 +221,6 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o # Platform specific device init code -omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o -obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) - obj-y += omap_phy_internal.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index f98c8ecc9ca2..dedd47e30b98 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -1147,7 +1147,21 @@ void clkdm_del_autodeps(struct clockdomain *clkdm) /* Clockdomain-to-clock/hwmod framework interface code */ -static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) +/** + * clkdm_clk_enable - add an enabled downstream clock to this clkdm + * @clkdm: struct clockdomain * + * @clk: struct clk * of the enabled downstream clock + * + * Increment the usecount of the clockdomain @clkdm and ensure that it + * is awake before @clk is enabled. Intended to be called by + * clk_enable() code. If the clockdomain is in software-supervised + * idle mode, force the clockdomain to wake. If the clockdomain is in + * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to + * ensure that devices in the clockdomain can be read from/written to + * by on-chip processors. Returns -EINVAL if passed null pointers; + * returns 0 upon success or if the clockdomain is in hwsup idle mode. + */ +int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *unused) { if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable) return -EINVAL; @@ -1175,33 +1189,6 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) } /** - * clkdm_clk_enable - add an enabled downstream clock to this clkdm - * @clkdm: struct clockdomain * - * @clk: struct clk * of the enabled downstream clock - * - * Increment the usecount of the clockdomain @clkdm and ensure that it - * is awake before @clk is enabled. Intended to be called by - * clk_enable() code. If the clockdomain is in software-supervised - * idle mode, force the clockdomain to wake. If the clockdomain is in - * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to - * ensure that devices in the clockdomain can be read from/written to - * by on-chip processors. Returns -EINVAL if passed null pointers; - * returns 0 upon success or if the clockdomain is in hwsup idle mode. - */ -int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) -{ - /* - * XXX Rewrite this code to maintain a list of enabled - * downstream clocks for debugging purposes? - */ - - if (!clk) - return -EINVAL; - - return _clkdm_clk_hwmod_enable(clkdm); -} - -/** * clkdm_clk_disable - remove an enabled downstream clock from this clkdm * @clkdm: struct clockdomain * * @clk: struct clk * of the disabled downstream clock @@ -1216,13 +1203,13 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) */ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) { - if (!clkdm || !clk || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) + if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) return -EINVAL; pwrdm_lock(clkdm->pwrdm.ptr); /* corner case: disabling unused clocks */ - if ((__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0) + if (clk && (__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0) goto ccd_exit; if (clkdm->usecount == 0) { @@ -1277,7 +1264,7 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh) if (!oh) return -EINVAL; - return _clkdm_clk_hwmod_enable(clkdm); + return clkdm_clk_enable(clkdm, NULL); } /** @@ -1300,35 +1287,10 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh) if (cpu_is_omap24xx() || cpu_is_omap34xx()) return 0; - /* - * XXX Rewrite this code to maintain a list of enabled - * downstream hwmods for debugging purposes? - */ - - if (!clkdm || !oh || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) + if (!oh) return -EINVAL; - pwrdm_lock(clkdm->pwrdm.ptr); - - if (clkdm->usecount == 0) { - pwrdm_unlock(clkdm->pwrdm.ptr); - WARN_ON(1); /* underflow */ - return -ERANGE; - } - - clkdm->usecount--; - if (clkdm->usecount > 0) { - pwrdm_unlock(clkdm->pwrdm.ptr); - return 0; - } - - arch_clkdm->clkdm_clk_disable(clkdm); - pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); - pwrdm_unlock(clkdm->pwrdm.ptr); - - pr_debug("clockdomain: %s: disabled\n", clkdm->name); - - return 0; + return clkdm_clk_disable(clkdm, NULL); } /** diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 6316da3623b3..223b37c48389 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -352,7 +352,6 @@ void omap_pcs_legacy_init(int irq, void (*rearm)(void)); struct omap_sdrc_params; extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); -struct omap2_hsmmc_info; extern void omap_reserve(void); struct omap_hwmod; diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index c84b5e260617..73338cf80d76 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -684,7 +684,7 @@ static u32 am33xx_control_vals[ARRAY_SIZE(am43xx_control_reg_offsets)]; * * Save the wkup domain registers */ -void am43xx_control_save_context(void) +static void am43xx_control_save_context(void) { int i; @@ -698,7 +698,7 @@ void am43xx_control_save_context(void) * * Restore the wkup domain registers */ -void am43xx_control_restore_context(void) +static void am43xx_control_restore_context(void) { int i; diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 393b42110511..eceb4b09adb2 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -195,6 +195,7 @@ #define OMAP44XX_CONTROL_FUSE_MPU_OPP100 0x243 #define OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO 0x246 #define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO 0x249 +#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB 0x24C #define OMAP44XX_CONTROL_FUSE_CORE_OPP50 0x254 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100 0x257 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV 0x25A diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 439e143cad7b..46012ca812f4 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -265,6 +265,7 @@ static int __init omapdss_init_of(void) r = of_platform_populate(node, NULL, NULL, &pdev->dev); if (r) { pr_err("Unable to populate DSS submodule devices\n"); + put_device(&pdev->dev); return r; } diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c deleted file mode 100644 index 63423ea6a240..000000000000 --- a/arch/arm/mach-omap2/hsmmc.c +++ /dev/null @@ -1,171 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap2/hsmmc.c - * - * Copyright (C) 2007-2008 Texas Instruments - * Copyright (C) 2008 Nokia Corporation - * Author: Texas Instruments - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/mmc/host.h> -#include <linux/platform_data/hsmmc-omap.h> - -#include "soc.h" -#include "omap_device.h" - -#include "hsmmc.h" -#include "control.h" - -#if IS_ENABLED(CONFIG_MMC_OMAP_HS) - -static u16 control_pbias_offset; -static u16 control_devconf1_offset; - -#define HSMMC_NAME_LEN 9 - -static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_hsmmc_platform_data *mmc) -{ - char *hc_name; - - hc_name = kzalloc(HSMMC_NAME_LEN + 1, GFP_KERNEL); - if (!hc_name) - return -ENOMEM; - - snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1); - mmc->name = hc_name; - mmc->caps = c->caps; - mmc->reg_offset = 0; - - return 0; -} - -static int omap_hsmmc_done; - -void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) -{ - struct platform_device *pdev; - int res; - - if (omap_hsmmc_done) - return; - - omap_hsmmc_done = 1; - - for (; c->mmc; c++) { - pdev = c->pdev; - if (!pdev) - continue; - res = omap_device_register(pdev); - if (res) - pr_err("Could not late init MMC\n"); - } -} - -#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 - -static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, - int ctrl_nr) -{ - struct omap_hwmod *oh; - struct omap_hwmod *ohs[1]; - struct omap_device *od; - struct platform_device *pdev; - char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; - struct omap_hsmmc_platform_data *mmc_data; - struct omap_hsmmc_dev_attr *mmc_dev_attr; - char *name; - int res; - - mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL); - if (!mmc_data) - return; - - res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data); - if (res < 0) - goto free_mmc; - - name = "omap_hsmmc"; - res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, - "mmc%d", ctrl_nr); - WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN, - "String buffer overflow in MMC%d device setup\n", ctrl_nr); - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - goto free_name; - } - ohs[0] = oh; - if (oh->dev_attr != NULL) { - mmc_dev_attr = oh->dev_attr; - mmc_data->controller_flags = mmc_dev_attr->flags; - } - - pdev = platform_device_alloc(name, ctrl_nr - 1); - if (!pdev) { - pr_err("Could not allocate pdev for %s\n", name); - goto free_name; - } - dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); - - od = omap_device_alloc(pdev, ohs, 1); - if (IS_ERR(od)) { - pr_err("Could not allocate od for %s\n", name); - goto put_pdev; - } - - res = platform_device_add_data(pdev, mmc_data, - sizeof(struct omap_hsmmc_platform_data)); - if (res) { - pr_err("Could not add pdata for %s\n", name); - goto put_pdev; - } - - hsmmcinfo->pdev = pdev; - - res = omap_device_register(pdev); - if (res) { - pr_err("Could not register od for %s\n", name); - goto free_od; - } - - goto free_mmc; - -free_od: - omap_device_delete(od); - -put_pdev: - platform_device_put(pdev); - -free_name: - kfree(mmc_data->name); - -free_mmc: - kfree(mmc_data); -} - -void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - if (omap_hsmmc_done) - return; - - omap_hsmmc_done = 1; - - if (cpu_is_omap2430()) { - control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; - } else { - control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; - } - - for (; controllers->mmc; controllers++) - omap_hsmmc_init_one(controllers, controllers->mmc); - -} - -#endif diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h deleted file mode 100644 index 76c5ed2afa72..000000000000 --- a/arch/arm/mach-omap2/hsmmc.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * MMC definitions for OMAP2 - */ - -struct mmc_card; - -struct omap2_hsmmc_info { - u8 mmc; /* controller 1/2/3 */ - u32 caps; /* 4/8 wires and any additional host - * capabilities OR'd (ref. linux/mmc/host.h) */ - struct platform_device *pdev; /* mmc controller instance */ - /* init some special card */ - void (*init_card)(struct mmc_card *card); -}; - -#if IS_ENABLED(CONFIG_MMC_OMAP_HS) - -void omap_hsmmc_init(struct omap2_hsmmc_info *); -void omap_hsmmc_late_init(struct omap2_hsmmc_info *); - -#else - -static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info) -{ -} - -static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info) -{ -} - -#endif diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 2d8f90546591..67fa28532a3a 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -227,7 +227,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET; - unsigned int wakeup_cpu; if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; @@ -292,7 +291,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * secure devices, CPUx does WFI which can result in * domain transition */ - wakeup_cpu = smp_processor_id(); pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); pwrdm_post_transition(NULL); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 3acb4192918d..1d55602b3f8f 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -119,11 +119,7 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od, /** * omap_device_build_from_dt - build an omap_device with multiple hwmods - * @pdev_name: name of the platform_device driver to use - * @pdev_id: this platform_device's connection ID - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata + * @pdev: The platform device to update. * * Function for building an omap_device already registered from device-tree * @@ -292,7 +288,7 @@ static int _omap_device_idle_hwmods(struct omap_device *od) /** * omap_device_get_context_loss_count - get lost context count - * @od: struct omap_device * + * @pdev: The platform device to update. * * Using the primary hwmod, query the context loss count for this * device. @@ -321,9 +317,8 @@ int omap_device_get_context_loss_count(struct platform_device *pdev) /** * omap_device_alloc - allocate an omap_device * @pdev: platform_device that will be included in this omap_device - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata + * @ohs: ptr to the omap_hwmod for this omap_device + * @oh_cnt: the size of the ohs list * * Convenience function for allocating an omap_device structure and filling * hwmods, and resources. @@ -649,7 +644,7 @@ struct dev_pm_domain omap_device_pm_domain = { /** * omap_device_register - register an omap_device with one omap_hwmod - * @od: struct omap_device * to register + * @pdev: the platform device (omap_device) to register. * * Register the omap_device structure. This currently just calls * platform_device_register() on the underlying platform_device. @@ -668,7 +663,7 @@ int omap_device_register(struct platform_device *pdev) /** * omap_device_enable - fully activate an omap_device - * @od: struct omap_device * to activate + * @pdev: the platform device to activate * * Do whatever is necessary for the hwmods underlying omap_device @od * to be accessible and ready to operate. This generally involves @@ -702,7 +697,7 @@ int omap_device_enable(struct platform_device *pdev) /** * omap_device_idle - idle an omap_device - * @od: struct omap_device * to idle + * @pdev: The platform_device (omap_device) to idle * * Idle omap_device @od. Device drivers call this function indirectly * via pm_runtime_put*(). Returns -EINVAL if the omap_device is not diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 203664c40d3d..a136788db839 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -623,39 +623,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) return 0; } -/** - * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware - * @oh: struct omap_hwmod * - * - * Prevent the hardware module @oh to send wakeups. Returns -EINVAL - * upon error or 0 upon success. - */ -static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) -{ - if (!oh->class->sysc || - !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) || - (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) || - (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP))) - return -EINVAL; - - if (!oh->class->sysc->sysc_fields) { - WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); - return -EINVAL; - } - - if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) - *v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift); - - if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) - _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); - if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); - - /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - - return 0; -} - static struct clockdomain *_get_clkdm(struct omap_hwmod *oh) { struct clk_hw_omap *clk; @@ -3868,70 +3835,6 @@ void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh) */ /** - * omap_hwmod_enable_wakeup - allow device to wake up the system - * @oh: struct omap_hwmod * - * - * Sets the module OCP socket ENAWAKEUP bit to allow the module to - * send wakeups to the PRCM, and enable I/O ring wakeup events for - * this IP block if it has dynamic mux entries. Eventually this - * should set PRCM wakeup registers to cause the PRCM to receive - * wakeup events from the module. Does not set any wakeup routing - * registers beyond this point - if the module is to wake up any other - * module or subsystem, that must be set separately. Called by - * omap_device code. Returns -EINVAL on error or 0 upon success. - */ -int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) -{ - unsigned long flags; - u32 v; - - spin_lock_irqsave(&oh->_lock, flags); - - if (oh->class->sysc && - (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { - v = oh->_sysc_cache; - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); - } - - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** - * omap_hwmod_disable_wakeup - prevent device from waking the system - * @oh: struct omap_hwmod * - * - * Clears the module OCP socket ENAWAKEUP bit to prevent the module - * from sending wakeups to the PRCM, and disable I/O ring wakeup - * events for this IP block if it has dynamic mux entries. Eventually - * this should clear PRCM wakeup registers to cause the PRCM to ignore - * wakeup events from the module. Does not set any wakeup routing - * registers beyond this point - if the module is to wake up any other - * module or subsystem, that must be set separately. Called by - * omap_device code. Returns -EINVAL on error or 0 upon success. - */ -int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) -{ - unsigned long flags; - u32 v; - - spin_lock_irqsave(&oh->_lock, flags); - - if (oh->class->sysc && - (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { - v = oh->_sysc_cache; - _disable_wakeup(oh, &v); - _write_sysconfig(v, oh); - } - - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** * omap_hwmod_assert_hardreset - assert the HW reset line of submodules * contained in the hwmod module. * @oh: struct omap_hwmod * diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index ef1bb08b1a2d..2d0fd99d4713 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -646,9 +646,6 @@ int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); -int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); -int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); - int omap_hwmod_for_each_by_class(const char *classname, int (*fn)(struct omap_hwmod *oh, void *user), diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 3de3d7a115b3..26e13d4fa19c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -35,10 +35,7 @@ extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2; extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc; -extern struct omap_hwmod_ocp_if am33xx_l4_per__mailbox; extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2; @@ -54,7 +51,6 @@ extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2; extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc; extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0; extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0; -extern struct omap_hwmod_ocp_if am33xx_l4_per__rng; extern struct omap_hwmod am33xx_l3_main_hwmod; extern struct omap_hwmod am33xx_l3_s_hwmod; @@ -67,7 +63,6 @@ extern struct omap_hwmod am33xx_gfx_hwmod; extern struct omap_hwmod am33xx_prcm_hwmod; extern struct omap_hwmod am33xx_aes0_hwmod; extern struct omap_hwmod am33xx_sha0_hwmod; -extern struct omap_hwmod am33xx_rng_hwmod; extern struct omap_hwmod am33xx_ocmcram_hwmod; extern struct omap_hwmod am33xx_smartreflex0_hwmod; extern struct omap_hwmod am33xx_smartreflex1_hwmod; @@ -78,9 +73,6 @@ extern struct omap_hwmod am33xx_epwmss0_hwmod; extern struct omap_hwmod am33xx_epwmss1_hwmod; extern struct omap_hwmod am33xx_epwmss2_hwmod; extern struct omap_hwmod am33xx_gpmc_hwmod; -extern struct omap_hwmod am33xx_mailbox_hwmod; -extern struct omap_hwmod am33xx_mcasp0_hwmod; -extern struct omap_hwmod am33xx_mcasp1_hwmod; extern struct omap_hwmod am33xx_rtc_hwmod; extern struct omap_hwmod am33xx_spi0_hwmod; extern struct omap_hwmod am33xx_spi1_hwmod; @@ -96,7 +88,6 @@ extern struct omap_hwmod am33xx_tpcc_hwmod; extern struct omap_hwmod am33xx_tptc0_hwmod; extern struct omap_hwmod am33xx_tptc1_hwmod; extern struct omap_hwmod am33xx_tptc2_hwmod; -extern struct omap_hwmod am33xx_wd_timer1_hwmod; extern struct omap_hwmod_class am33xx_emif_hwmod_class; extern struct omap_hwmod_class am33xx_l4_hwmod_class; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index 63698ffa6d27..7123c455aaa9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -158,14 +158,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { .user = OCP_USER_MPU, }; -/* l4 ls -> mailbox */ -struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mailbox_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l4 ls -> spinlock */ struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = { .master = &am33xx_l4_ls_hwmod, @@ -174,22 +166,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = { .user = OCP_USER_MPU, }; -/* l4 ls -> mcasp0 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mcasp0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mcasp1 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mcasp1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l4 ls -> mcspi0 */ struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = { .master = &am33xx_l4_ls_hwmod, @@ -308,11 +284,3 @@ struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = { .clk = "aes0_fck", .user = OCP_USER_MPU | OCP_USER_SDMA, }; - -/* l4 per -> rng */ -struct omap_hwmod_ocp_if am33xx_l4_per__rng = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_rng_hwmod, - .clk = "rng_fck", - .user = OCP_USER_MPU, -}; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 29fd13684a68..2df8659612ef 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -17,7 +17,6 @@ #include <linux/types.h> #include "omap_hwmod.h" -#include "wd_timer.h" #include "cm33xx.h" #include "prm33xx.h" #include "omap_hwmod_33xx_43xx_common_data.h" @@ -266,33 +265,6 @@ struct omap_hwmod am33xx_sha0_hwmod = { }, }; -/* rng */ -static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = { - .rev_offs = 0x1fe0, - .sysc_offs = 0x1fe4, - .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE, - .idlemodes = SIDLE_FORCE | SIDLE_NO, - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_rng_hwmod_class = { - .name = "rng", - .sysc = &am33xx_rng_sysc, -}; - -struct omap_hwmod am33xx_rng_hwmod = { - .name = "rng", - .class = &am33xx_rng_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "rng_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* ocmcram */ static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { .name = "ocmcram", @@ -466,86 +438,6 @@ struct omap_hwmod am33xx_epwmss2_hwmod = { }, }; -/* - * 'gpio' class: for gpio 0,1,2,3 - */ -static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_gpio_hwmod_class = { - .name = "gpio", - .sysc = &am33xx_gpio_sysc, -}; - -/* gpio1 */ -static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { - { .role = "dbclk", .clk = "gpio1_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio1_hwmod = { - .name = "gpio2", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), -}; - -/* gpio2 */ -static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { - { .role = "dbclk", .clk = "gpio2_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio2_hwmod = { - .name = "gpio3", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), -}; - -/* gpio3 */ -static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { - { .role = "dbclk", .clk = "gpio3_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio3_hwmod = { - .name = "gpio4", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), -}; - /* gpmc */ static struct omap_hwmod_class_sysconfig gpmc_sysc = { .rev_offs = 0x0, @@ -576,78 +468,6 @@ struct omap_hwmod am33xx_gpmc_hwmod = { }, }; -/* - * 'mailbox' class - * mailbox module allowing communication between the on-chip processors using a - * queued mailbox-interrupt mechanism. - */ -static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class am33xx_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &am33xx_mailbox_sysc, -}; - -struct omap_hwmod am33xx_mailbox_hwmod = { - .name = "mailbox", - .class = &am33xx_mailbox_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mcasp' class - */ -static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x4, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type3, -}; - -static struct omap_hwmod_class am33xx_mcasp_hwmod_class = { - .name = "mcasp", - .sysc = &am33xx_mcasp_sysc, -}; - -/* mcasp0 */ -struct omap_hwmod am33xx_mcasp0_hwmod = { - .name = "mcasp0", - .class = &am33xx_mcasp_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "mcasp0_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcasp1 */ -struct omap_hwmod am33xx_mcasp1_hwmod = { - .name = "mcasp1", - .class = &am33xx_mcasp_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "mcasp1_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* * 'rtc' class @@ -950,41 +770,6 @@ struct omap_hwmod am33xx_tptc2_hwmod = { }, }; -/* 'wd_timer' class */ -static struct omap_hwmod_class_sysconfig wdt_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .syss_offs = 0x14, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { - .name = "wd_timer", - .sysc = &wdt_sysc, - .pre_shutdown = &omap2_wd_timer_disable, -}; - -/* - * XXX: device.c file uses hardcoded name for watchdog timer - * driver "wd_timer2, so we are also using same name as of now... - */ -struct omap_hwmod am33xx_wd_timer1_hwmod = { - .name = "wd_timer2", - .class = &am33xx_wd_timer_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "wdt1_fck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - static void omap_hwmod_am33xx_clkctrl(void) { CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET); @@ -993,12 +778,6 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_epwmss0_hwmod, AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET); CLKCTRL(am33xx_epwmss1_hwmod, AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET); CLKCTRL(am33xx_epwmss2_hwmod, AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio1_hwmod, AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio2_hwmod, AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio3_hwmod, AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mailbox_hwmod, AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mcasp0_hwmod, AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mcasp1_hwmod, AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); @@ -1013,7 +792,6 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_smartreflex1_hwmod, AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET); PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); @@ -1031,7 +809,6 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET); CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_rng_hwmod, AM33XX_CM_PER_RNG_CLKCTRL_OFFSET); } static void omap_hwmod_am33xx_rst(void) @@ -1055,12 +832,6 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_epwmss0_hwmod, AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET); CLKCTRL(am33xx_epwmss1_hwmod, AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET); CLKCTRL(am33xx_epwmss2_hwmod, AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio1_hwmod, AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio2_hwmod, AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_gpio3_hwmod, AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mailbox_hwmod, AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mcasp0_hwmod, AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mcasp1_hwmod, AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); @@ -1075,7 +846,6 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_smartreflex1_hwmod, AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_wd_timer1_hwmod, AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); @@ -1092,7 +862,6 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET); CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_rng_hwmod, AM43XX_CM_PER_RNG_CLKCTRL_OFFSET); } static void omap_hwmod_am43xx_rst(void) diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 54524775f278..c63f66427e46 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -21,7 +21,6 @@ #include "cm33xx.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" -#include "wd_timer.h" #include "omap_hwmod_33xx_43xx_common_data.h" /* @@ -257,39 +256,6 @@ static struct omap_hwmod am33xx_lcdc_hwmod = { }; /* - * 'usb_otg' class - * high-speed on-the-go universal serial bus (usb_otg) controller - */ -static struct omap_hwmod_class_sysconfig am33xx_usbhsotg_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class am33xx_usbotg_class = { - .name = "usbotg", - .sysc = &am33xx_usbhsotg_sysc, -}; - -static struct omap_hwmod am33xx_usbss_hwmod = { - .name = "usb_otg_hs", - .class = &am33xx_usbotg_class, - .clkdm_name = "l3s_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "usbotg_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_USB0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - - -/* * Interfaces */ @@ -388,24 +354,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = { .user = OCP_USER_MPU, }; -/* l4 wkup -> wd_timer1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_wd_timer1_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - -/* usbss */ -/* l3 s -> USBSS interface */ -static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_usbss_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU, - .flags = OCPIF_SWSUP_IDLE, -}; - static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__emif, &am33xx_mpu__l3_main, @@ -428,13 +376,9 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__timer1, &am33xx_l4_wkup__rtc, &am33xx_l4_wkup__adc_tsc, - &am33xx_l4_wkup__wd_timer1, &am33xx_l4_hs__pruss, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, - &am33xx_l4_per__mailbox, - &am33xx_l4_ls__mcasp0, - &am33xx_l4_ls__mcasp1, &am33xx_l4_ls__timer2, &am33xx_l4_ls__timer3, &am33xx_l4_ls__timer4, @@ -455,10 +399,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__tptc1, &am33xx_l3_main__tptc2, &am33xx_l3_main__ocmc, - &am33xx_l3_s__usbss, &am33xx_l3_main__sha0, &am33xx_l3_main__aes0, - &am33xx_l4_per__rng, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 5c3db6b6438b..b81f83466c94 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -18,8 +18,6 @@ #include "omap_hwmod_33xx_43xx_common_data.h" #include "prcm43xx.h" #include "omap_hwmod_common_data.h" -#include "hdq1w.h" - /* IP blocks */ static struct omap_hwmod am43xx_emif_hwmod = { @@ -468,32 +466,6 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = { .parent_hwmod = &am43xx_dss_core_hwmod, }; -/* HDQ1W */ -static struct omap_hwmod_class_sysconfig am43xx_hdq1w_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0014, - .syss_offs = 0x0018, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am43xx_hdq1w_hwmod_class = { - .name = "hdq1w", - .sysc = &am43xx_hdq1w_sysc, - .reset = &omap_hdq1w_reset, -}; - -static struct omap_hwmod am43xx_hdq1w_hwmod = { - .name = "hdq1w", - .class = &am43xx_hdq1w_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = { .rev_offs = 0x0, @@ -604,13 +576,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l4_wkup__wd_timer1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_wd_timer1_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = { .master = &am33xx_l4_wkup_hwmod, .slave = &am43xx_synctimer_hwmod, @@ -751,13 +716,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_hdq1w_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = { .master = &am43xx_vpfe0_hwmod, .slave = &am33xx_l3_main_hwmod, @@ -824,15 +782,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__smartreflex0, &am43xx_l4_wkup__smartreflex1, &am43xx_l4_wkup__timer1, - &am43xx_l4_wkup__wd_timer1, &am43xx_l4_wkup__adc_tsc, &am43xx_l3_s__qspi, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, - &am33xx_l4_per__mailbox, - &am33xx_l4_per__rng, - &am33xx_l4_ls__mcasp0, - &am33xx_l4_ls__mcasp1, &am33xx_l4_ls__timer2, &am33xx_l4_ls__timer3, &am33xx_l4_ls__timer4, @@ -863,7 +816,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__dss, &am43xx_l4_ls__dss_dispc, &am43xx_l4_ls__dss_rfbi, - &am43xx_l4_ls__hdq1w, &am43xx_l3__vpfe0, &am43xx_l3__vpfe1, &am43xx_l4_ls__vpfe0, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 28ea2960a9b2..292f544bd62d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -790,7 +790,7 @@ static struct omap_hwmod_class omap44xx_sha0_hwmod_class = { .sysc = &omap44xx_sha0_sysc, }; -struct omap_hwmod omap44xx_sha0_hwmod = { +static struct omap_hwmod omap44xx_sha0_hwmod = { .name = "sham", .class = &omap44xx_sha0_hwmod_class, .clkdm_name = "l4_secure_clkdm", @@ -974,7 +974,7 @@ static struct omap_hwmod omap44xx_des_hwmod = { }, }; -struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = { +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_des_hwmod, .clk = "l3_div_ck", @@ -1061,40 +1061,6 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = { }, }; -/* - * 'hdq1w' class - * hdq / 1-wire serial interface controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_hdq1w_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0014, - .syss_offs = 0x0018, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_hdq1w_hwmod_class = { - .name = "hdq1w", - .sysc = &omap44xx_hdq1w_sysc, -}; - -/* hdq1w */ -static struct omap_hwmod omap44xx_hdq1w_hwmod = { - .name = "hdq1w", - .class = &omap44xx_hdq1w_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_RESET, /* XXX temporary */ - .main_clk = "func_12m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* * 'hsi' class @@ -1288,180 +1254,6 @@ static struct omap_hwmod omap44xx_kbd_hwmod = { }, }; -/* - * 'mailbox' class - * mailbox module allowing communication between the on-chip processors using a - * queued mailbox-interrupt mechanism. - */ - -static struct omap_hwmod_class_sysconfig omap44xx_mailbox_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &omap44xx_mailbox_sysc, -}; - -/* mailbox */ -static struct omap_hwmod omap44xx_mailbox_hwmod = { - .name = "mailbox", - .class = &omap44xx_mailbox_hwmod_class, - .clkdm_name = "l4_cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'mcasp' class - * multi-channel audio serial port controller - */ - -/* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_class_sysconfig omap44xx_mcasp_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0004, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type_mcasp, -}; - -static struct omap_hwmod_class omap44xx_mcasp_hwmod_class = { - .name = "mcasp", - .sysc = &omap44xx_mcasp_sysc, -}; - -/* mcasp */ -static struct omap_hwmod omap44xx_mcasp_hwmod = { - .name = "mcasp", - .class = &omap44xx_mcasp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "func_mcasp_abe_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mcbsp' class - * multi channel buffered serial port controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = { - .rev_offs = -ENODEV, - .sysc_offs = 0x008c, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = { - .name = "mcbsp", - .sysc = &omap44xx_mcbsp_sysc, -}; - -/* mcbsp1 */ -static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, -}; - -static struct omap_hwmod omap44xx_mcbsp1_hwmod = { - .name = "mcbsp1", - .class = &omap44xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "func_mcbsp1_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), -}; - -/* mcbsp2 */ -static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, -}; - -static struct omap_hwmod omap44xx_mcbsp2_hwmod = { - .name = "mcbsp2", - .class = &omap44xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "func_mcbsp2_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), -}; - -/* mcbsp3 */ -static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, -}; - -static struct omap_hwmod omap44xx_mcbsp3_hwmod = { - .name = "mcbsp3", - .class = &omap44xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "func_mcbsp3_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), -}; - -/* mcbsp4 */ -static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" }, -}; - -static struct omap_hwmod omap44xx_mcbsp4_hwmod = { - .name = "mcbsp4", - .class = &omap44xx_mcbsp_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "per_mcbsp4_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp4_opt_clks), -}; /* * 'mcpdm' class @@ -2295,51 +2087,6 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { }; /* - * 'usb_otg_hs' class - * high-speed on-the-go universal serial bus (usb_otg_hs) controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_usb_otg_hs_sysc = { - .rev_offs = 0x0400, - .sysc_offs = 0x0404, - .syss_offs = 0x0408, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_usb_otg_hs_hwmod_class = { - .name = "usb_otg_hs", - .sysc = &omap44xx_usb_otg_hs_sysc, -}; - -/* usb_otg_hs */ -static struct omap_hwmod_opt_clk usb_otg_hs_opt_clks[] = { - { .role = "xclk", .clk = "usb_otg_hs_xclk" }, -}; - -static struct omap_hwmod omap44xx_usb_otg_hs_hwmod = { - .name = "usb_otg_hs", - .class = &omap44xx_usb_otg_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "usb_otg_hs_ick", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = usb_otg_hs_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(usb_otg_hs_opt_clks), -}; - -/* * 'usb_tll_hs' class * usb_tll_hs module is the adapter on the usb_host_hs ports */ @@ -2546,14 +2293,6 @@ static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* usb_otg_hs -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = { - .master = &omap44xx_usb_otg_hs_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l3_main_3 */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { .master = &omap44xx_l3_main_1_hwmod, @@ -2898,14 +2637,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> hdq1w */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__hdq1w = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_hdq1w_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> hsi */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = { .master = &omap44xx_l4_cfg_hwmod, @@ -2954,62 +2685,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> mailbox */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_mailbox_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_abe -> mcasp */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcasp = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcasp_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcasp (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcasp_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcasp_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, -}; - -/* l4_abe -> mcbsp1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp1_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_abe -> mcbsp2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp2_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_abe -> mcbsp3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp3_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcbsp4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcbsp4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_abe -> mcpdm */ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { .master = &omap44xx_l4_abe_hwmod, @@ -3242,14 +2917,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> usb_otg_hs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_usb_otg_hs_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> usb_tll_hs */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = { .master = &omap44xx_l4_cfg_hwmod, @@ -3296,7 +2963,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__l3_main_2, /* &omap44xx_usb_host_fs__l3_main_2, */ &omap44xx_usb_host_hs__l3_main_2, - &omap44xx_usb_otg_hs__l3_main_2, &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, @@ -3339,20 +3005,12 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__elm, &omap44xx_l4_cfg__fdif, &omap44xx_l3_main_2__gpmc, - &omap44xx_l4_per__hdq1w, &omap44xx_l4_cfg__hsi, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, &omap44xx_l4_wkup__kbd, - &omap44xx_l4_cfg__mailbox, - &omap44xx_l4_abe__mcasp, - &omap44xx_l4_abe__mcasp_dma, - &omap44xx_l4_abe__mcbsp1, - &omap44xx_l4_abe__mcbsp2, - &omap44xx_l4_abe__mcbsp3, - &omap44xx_l4_per__mcbsp4, &omap44xx_l4_abe__mcpdm, &omap44xx_l3_main_2__mmu_ipu, &omap44xx_l4_cfg__mmu_dsp, @@ -3384,7 +3042,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__timer11, /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, - &omap44xx_l4_cfg__usb_otg_hs, &omap44xx_l4_cfg__usb_tll_hs, &omap44xx_mpu__emif1, &omap44xx_mpu__emif2, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 8006b4383534..cc5ad6acab1d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -24,7 +24,6 @@ #include "cm1_54xx.h" #include "cm2_54xx.h" #include "prm54xx.h" -#include "wd_timer.h" /* Base offset for all OMAP5 interrupts external to MPUSS */ #define OMAP54XX_IRQ_GIC_START 32 @@ -629,124 +628,6 @@ static struct omap_hwmod omap54xx_kbd_hwmod = { }; /* - * 'mailbox' class - * mailbox module allowing communication between the on-chip processors using a - * queued mailbox-interrupt mechanism. - */ - -static struct omap_hwmod_class_sysconfig omap54xx_mailbox_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &omap54xx_mailbox_sysc, -}; - -/* mailbox */ -static struct omap_hwmod omap54xx_mailbox_hwmod = { - .name = "mailbox", - .class = &omap54xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4CFG_MAILBOX_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'mcbsp' class - * multi channel buffered serial port controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_mcbsp_sysc = { - .rev_offs = -ENODEV, - .sysc_offs = 0x008c, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_mcbsp_hwmod_class = { - .name = "mcbsp", - .sysc = &omap54xx_mcbsp_sysc, -}; - -/* mcbsp1 */ -static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, -}; - -static struct omap_hwmod omap54xx_mcbsp1_hwmod = { - .name = "mcbsp1", - .class = &omap54xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "mcbsp1_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_ABE_MCBSP1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_ABE_MCBSP1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), -}; - -/* mcbsp2 */ -static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, -}; - -static struct omap_hwmod omap54xx_mcbsp2_hwmod = { - .name = "mcbsp2", - .class = &omap54xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "mcbsp2_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_ABE_MCBSP2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_ABE_MCBSP2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), -}; - -/* mcbsp3 */ -static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { - { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, -}; - -static struct omap_hwmod omap54xx_mcbsp3_hwmod = { - .name = "mcbsp3", - .class = &omap54xx_mcbsp_hwmod_class, - .clkdm_name = "abe_clkdm", - .main_clk = "mcbsp3_gfclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_ABE_MCBSP3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_ABE_MCBSP3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mcbsp3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), -}; - -/* * 'mcpdm' class * multi channel pdm controller (proprietary interface with phoenix power * ic) @@ -795,86 +676,6 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = { }, }; -/* - * 'mcspi' class - * multichannel serial port interface (mcspi) / master/slave synchronous serial - * bus - */ - -static struct omap_hwmod_class_sysconfig omap54xx_mcspi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_mcspi_hwmod_class = { - .name = "mcspi", - .sysc = &omap54xx_mcspi_sysc, -}; - -/* mcspi1 */ -static struct omap_hwmod omap54xx_mcspi1_hwmod = { - .name = "mcspi1", - .class = &omap54xx_mcspi_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi2 */ -static struct omap_hwmod omap54xx_mcspi2_hwmod = { - .name = "mcspi2", - .class = &omap54xx_mcspi_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi3 */ -static struct omap_hwmod omap54xx_mcspi3_hwmod = { - .name = "mcspi3", - .class = &omap54xx_mcspi_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi4 */ -static struct omap_hwmod omap54xx_mcspi4_hwmod = { - .name = "mcspi4", - .class = &omap54xx_mcspi_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* * 'mmu' class @@ -1392,43 +1193,6 @@ static struct omap_hwmod omap54xx_usb_otg_ss_hwmod = { .opt_clks_cnt = ARRAY_SIZE(usb_otg_ss_opt_clks), }; -/* - * 'wd_timer' class - * 32-bit watchdog upward counter that generates a pulse on the reset pin on - * overflow condition - */ - -static struct omap_hwmod_class_sysconfig omap54xx_wd_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_wd_timer_hwmod_class = { - .name = "wd_timer", - .sysc = &omap54xx_wd_timer_sysc, - .pre_shutdown = &omap2_wd_timer_disable, -}; - -/* wd_timer2 */ -static struct omap_hwmod omap54xx_wd_timer2_hwmod = { - .name = "wd_timer2", - .class = &omap54xx_wd_timer_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "sys_32k_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* * 'ocp2scp' class @@ -1747,38 +1511,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> mailbox */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mailbox = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_mailbox_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_abe -> mcbsp1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp1 = { - .master = &omap54xx_l4_abe_hwmod, - .slave = &omap54xx_mcbsp1_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp2 = { - .master = &omap54xx_l4_abe_hwmod, - .slave = &omap54xx_mcbsp2_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp3 = { - .master = &omap54xx_l4_abe_hwmod, - .slave = &omap54xx_mcbsp3_hwmod, - .clk = "abe_iclk", - .user = OCP_USER_MPU, -}; - /* l4_abe -> mcpdm */ static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcpdm = { .master = &omap54xx_l4_abe_hwmod, @@ -1787,38 +1519,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcpdm = { .user = OCP_USER_MPU, }; -/* l4_per -> mcspi1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi1 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mcspi1_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mcspi2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mcspi3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mcspi4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mpu */ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .master = &omap54xx_l4_cfg_hwmod, @@ -1955,14 +1655,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_wkup__wd_timer2 = { - .master = &omap54xx_l4_wkup_hwmod, - .slave = &omap54xx_wd_timer2_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_1__dmm, &omap54xx_l3_main_3__l3_instr, @@ -1994,15 +1686,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_mpu__emif2, &omap54xx_l3_main_2__mmu_ipu, &omap54xx_l4_wkup__kbd, - &omap54xx_l4_cfg__mailbox, - &omap54xx_l4_abe__mcbsp1, - &omap54xx_l4_abe__mcbsp2, - &omap54xx_l4_abe__mcbsp3, &omap54xx_l4_abe__mcpdm, - &omap54xx_l4_per__mcspi1, - &omap54xx_l4_per__mcspi2, - &omap54xx_l4_per__mcspi3, - &omap54xx_l4_per__mcspi4, &omap54xx_l4_cfg__mpu, &omap54xx_l4_cfg__spinlock, &omap54xx_l4_cfg__ocp2scp1, @@ -2020,7 +1704,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__usb_host_hs, &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, - &omap54xx_l4_wkup__wd_timer2, &omap54xx_l4_cfg__ocp2scp3, &omap54xx_l4_cfg__sata, NULL, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index e5bd549d2a5e..f8715bd96687 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -24,7 +24,6 @@ #include "cm1_7xx.h" #include "cm2_7xx.h" #include "prm7xx.h" -#include "wd_timer.h" #include "soc.h" /* Base offset for all DRA7XX interrupts external to MPUSS */ @@ -683,7 +682,7 @@ static struct omap_hwmod_class dra7xx_sha0_hwmod_class = { .sysc = &dra7xx_sha0_sysc, }; -struct omap_hwmod dra7xx_sha0_hwmod = { +static struct omap_hwmod dra7xx_sha0_hwmod = { .name = "sham", .class = &dra7xx_sha0_hwmod_class, .clkdm_name = "l4sec_clkdm", @@ -772,229 +771,7 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = { }, }; -/* - * 'hdq1w' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_hdq1w_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0014, - .syss_offs = 0x0018, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .sysc_fields = &omap_hwmod_sysc_type1, -}; -static struct omap_hwmod_class dra7xx_hdq1w_hwmod_class = { - .name = "hdq1w", - .sysc = &dra7xx_hdq1w_sysc, -}; - -/* hdq1w */ - -static struct omap_hwmod dra7xx_hdq1w_hwmod = { - .name = "hdq1w", - .class = &dra7xx_hdq1w_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_INIT_NO_RESET, - .main_clk = "func_12m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_HDQ1W_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_HDQ1W_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mailbox' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_mailbox_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &dra7xx_mailbox_sysc, -}; - -/* mailbox1 */ -static struct omap_hwmod dra7xx_mailbox1_hwmod = { - .name = "mailbox1", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX1_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox2 */ -static struct omap_hwmod dra7xx_mailbox2_hwmod = { - .name = "mailbox2", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX2_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox3 */ -static struct omap_hwmod dra7xx_mailbox3_hwmod = { - .name = "mailbox3", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX3_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox4 */ -static struct omap_hwmod dra7xx_mailbox4_hwmod = { - .name = "mailbox4", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX4_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox5 */ -static struct omap_hwmod dra7xx_mailbox5_hwmod = { - .name = "mailbox5", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX5_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox6 */ -static struct omap_hwmod dra7xx_mailbox6_hwmod = { - .name = "mailbox6", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX6_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox7 */ -static struct omap_hwmod dra7xx_mailbox7_hwmod = { - .name = "mailbox7", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX7_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox8 */ -static struct omap_hwmod dra7xx_mailbox8_hwmod = { - .name = "mailbox8", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX8_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox9 */ -static struct omap_hwmod dra7xx_mailbox9_hwmod = { - .name = "mailbox9", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX9_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox10 */ -static struct omap_hwmod dra7xx_mailbox10_hwmod = { - .name = "mailbox10", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX10_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox11 */ -static struct omap_hwmod dra7xx_mailbox11_hwmod = { - .name = "mailbox11", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX11_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox12 */ -static struct omap_hwmod dra7xx_mailbox12_hwmod = { - .name = "mailbox12", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX12_CONTEXT_OFFSET, - }, - }, -}; - -/* mailbox13 */ -static struct omap_hwmod dra7xx_mailbox13_hwmod = { - .name = "mailbox13", - .class = &dra7xx_mailbox_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_MAILBOX13_CONTEXT_OFFSET, - }, - }, -}; /* * 'mpu' class @@ -1655,34 +1432,6 @@ static struct omap_hwmod dra7xx_des_hwmod = { }, }; -/* rng */ -static struct omap_hwmod_class_sysconfig dra7xx_rng_sysc = { - .rev_offs = 0x1fe0, - .sysc_offs = 0x1fe4, - .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE, - .idlemodes = SIDLE_FORCE | SIDLE_NO, - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_rng_hwmod_class = { - .name = "rng", - .sysc = &dra7xx_rng_sysc, -}; - -static struct omap_hwmod dra7xx_rng_hwmod = { - .name = "rng", - .class = &dra7xx_rng_hwmod_class, - .flags = HWMOD_SWSUP_SIDLE, - .clkdm_name = "l4sec_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4SEC_RNG_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4SEC_RNG_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - /* * 'usb_otg_ss' class * @@ -1815,43 +1564,6 @@ static struct omap_hwmod dra7xx_vcp2_hwmod = { }, }; -/* - * 'wd_timer' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_wd_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_wd_timer_hwmod_class = { - .name = "wd_timer", - .sysc = &dra7xx_wd_timer_sysc, - .pre_shutdown = &omap2_wd_timer_disable, - .reset = &omap2_wd_timer_reset, -}; - -/* wd_timer2 */ -static struct omap_hwmod dra7xx_wd_timer2_hwmod = { - .name = "wd_timer2", - .class = &dra7xx_wd_timer_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "sys_32k_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; /* @@ -2090,118 +1802,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> hdq1w */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__hdq1w = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_hdq1w_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> mailbox1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_mailbox1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox2 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox3 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox4 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox5 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox5 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox5_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox6 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox6 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox6_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox7 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox7 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox7_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox8 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox8 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox8_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox9 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox9 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox9_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox10 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox10 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox10_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox11 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox11 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox11_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox12 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox12 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox12_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> mailbox13 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox13 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_mailbox13_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mpu */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { .master = &dra7xx_l4_cfg_hwmod, @@ -2442,13 +2042,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> rng */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__rng = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_rng_hwmod, - .user = OCP_USER_MPU, -}; - /* l4_per3 -> usb_otg_ss1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = { .master = &dra7xx_l4_per3_hwmod, @@ -2513,14 +2106,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_wd_timer2_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_per2 -> epwmss0 */ static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss0 = { .master = &dra7xx_l4_per2_hwmod, @@ -2575,20 +2160,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__sha0, &dra7xx_l4_per1__elm, &dra7xx_l3_main_1__gpmc, - &dra7xx_l4_per1__hdq1w, - &dra7xx_l4_cfg__mailbox1, - &dra7xx_l4_per3__mailbox2, - &dra7xx_l4_per3__mailbox3, - &dra7xx_l4_per3__mailbox4, - &dra7xx_l4_per3__mailbox5, - &dra7xx_l4_per3__mailbox6, - &dra7xx_l4_per3__mailbox7, - &dra7xx_l4_per3__mailbox8, - &dra7xx_l4_per3__mailbox9, - &dra7xx_l4_per3__mailbox10, - &dra7xx_l4_per3__mailbox11, - &dra7xx_l4_per3__mailbox12, - &dra7xx_l4_per3__mailbox13, &dra7xx_l4_cfg__mpu, &dra7xx_l4_cfg__ocp2scp1, &dra7xx_l4_cfg__ocp2scp3, @@ -2624,7 +2195,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per2__vcp1, &dra7xx_l3_main_1__vcp2, &dra7xx_l4_per2__vcp2, - &dra7xx_l4_wkup__wd_timer2, &dra7xx_l4_per2__epwmss0, &dra7xx_l4_per2__epwmss1, &dra7xx_l4_per2__epwmss2, @@ -2634,7 +2204,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { /* GP-only hwmod links */ static struct omap_hwmod_ocp_if *dra7xx_gp_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_wkup__timer12, - &dra7xx_l4_per1__rng, NULL, }; diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 6787f1e72c6b..a642d3b39e50 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -36,11 +36,6 @@ #define OMAP4_VDD_CORE_SR_VOLT_REG 0x61 #define OMAP4_VDD_CORE_SR_CMD_REG 0x62 -#define OMAP4_VP_CONFIG_ERROROFFSET 0x00 -#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 -#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04 -#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200 - static bool is_offset_valid; static u8 smps_offset; @@ -219,7 +214,8 @@ int __init omap4_twl_init(void) { struct voltagedomain *voltdm; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap44xx() || + of_find_compatible_node(NULL, NULL, "motorola,cpcap")) return -ENODEV; voltdm = voltdm_lookup("mpu"); diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index adea43ea1c60..985aeab9bc2a 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -32,20 +32,22 @@ #define OMAP4430_VDD_MPU_OPP50_UV 1025000 #define OMAP4430_VDD_MPU_OPP100_UV 1200000 -#define OMAP4430_VDD_MPU_OPPTURBO_UV 1313000 -#define OMAP4430_VDD_MPU_OPPNITRO_UV 1375000 +#define OMAP4430_VDD_MPU_OPPTURBO_UV 1325000 +#define OMAP4430_VDD_MPU_OPPNITRO_UV 1388000 +#define OMAP4430_VDD_MPU_OPPNITROSB_UV 1398000 struct omap_volt_data omap443x_vdd_mpu_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27), + VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITROSB_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB, 0xfa, 0x27), VOLT_DATA_DEFINE(0, 0, 0, 0), }; -#define OMAP4430_VDD_IVA_OPP50_UV 1013000 -#define OMAP4430_VDD_IVA_OPP100_UV 1188000 -#define OMAP4430_VDD_IVA_OPPTURBO_UV 1300000 +#define OMAP4430_VDD_IVA_OPP50_UV 950000 +#define OMAP4430_VDD_IVA_OPP100_UV 1114000 +#define OMAP4430_VDD_IVA_OPPTURBO_UV 1291000 struct omap_volt_data omap443x_vdd_iva_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), @@ -54,8 +56,8 @@ struct omap_volt_data omap443x_vdd_iva_volt_data[] = { VOLT_DATA_DEFINE(0, 0, 0, 0), }; -#define OMAP4430_VDD_CORE_OPP50_UV 1025000 -#define OMAP4430_VDD_CORE_OPP100_UV 1200000 +#define OMAP4430_VDD_CORE_OPP50_UV 962000 +#define OMAP4430_VDD_CORE_OPP100_UV 1127000 struct omap_volt_data omap443x_vdd_core_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c), diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 2efd18e8824c..ca52271de5a8 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -7,11 +7,9 @@ #include <linux/clk.h> #include <linux/davinci_emac.h> #include <linux/gpio.h> -#include <linux/gpio/machine.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/of_platform.h> -#include <linux/ti_wilink_st.h> #include <linux/wl12xx.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -33,7 +31,6 @@ #include "omap_device.h" #include "omap-secure.h" #include "soc.h" -#include "hsmmc.h" static struct omap_hsmmc_platform_data __maybe_unused mmc_pdata[2]; @@ -146,53 +143,6 @@ static void __init omap3_sbc_t3530_legacy_init(void) omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); } -static struct ti_st_plat_data wilink_pdata = { - .nshutdown_gpio = 137, - .dev_name = "/dev/ttyO1", - .flow_cntrl = 1, - .baud_rate = 300000, -}; - -static struct platform_device wl18xx_device = { - .name = "kim", - .id = -1, - .dev = { - .platform_data = &wilink_pdata, - } -}; - -static struct ti_st_plat_data wilink7_pdata = { - .nshutdown_gpio = 162, - .dev_name = "/dev/ttyO1", - .flow_cntrl = 1, - .baud_rate = 3000000, -}; - -static struct platform_device wl128x_device = { - .name = "kim", - .id = -1, - .dev = { - .platform_data = &wilink7_pdata, - } -}; - -static struct platform_device btwilink_device = { - .name = "btwilink", - .id = -1, -}; - -static void __init omap3_igep0020_rev_f_legacy_init(void) -{ - platform_device_register(&wl18xx_device); - platform_device_register(&btwilink_device); -} - -static void __init omap3_igep0030_rev_g_legacy_init(void) -{ - platform_device_register(&wl18xx_device); - platform_device_register(&btwilink_device); -} - static void __init omap3_evm_legacy_init(void) { hsmmc2_internal_input_clk(); @@ -269,21 +219,13 @@ static void __init am3517_evm_legacy_init(void) am35xx_emac_reset(); } -static struct platform_device omap3_rom_rng_device = { - .name = "omap3-rom-rng", - .id = -1, - .dev = { - .platform_data = rx51_secure_rng_call, - }, -}; - static void __init nokia_n900_legacy_init(void) { hsmmc2_internal_input_clk(); mmc_pdata[0].name = "external"; mmc_pdata[1].name = "internal"; - if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { + if (omap_type() != OMAP2_DEVICE_TYPE_GP) { if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) { pr_info("RX-51: Enabling ARM errata 430973 workaround\n"); /* set IBE to 1 */ @@ -292,9 +234,6 @@ static void __init nokia_n900_legacy_init(void) pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n"); pr_warn("Thumb binaries may crash randomly without this workaround\n"); } - - pr_info("RX-51: Registering OMAP3 HWRNG device\n"); - platform_device_register(&omap3_rom_rng_device); } } @@ -306,123 +245,18 @@ static void __init omap3_tao3530_legacy_init(void) static void __init omap3_logicpd_torpedo_init(void) { omap3_gpio126_127_129(); - platform_device_register(&wl128x_device); - platform_device_register(&btwilink_device); } /* omap3pandora legacy devices */ -#define PANDORA_WIFI_IRQ_GPIO 21 -#define PANDORA_WIFI_NRESET_GPIO 23 static struct platform_device pandora_backlight = { .name = "pandora-backlight", .id = -1, }; -static struct regulator_consumer_supply pandora_vmmc3_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), -}; - -static struct regulator_init_data pandora_vmmc3 = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply), - .consumer_supplies = pandora_vmmc3_supply, -}; - -static struct fixed_voltage_config pandora_vwlan = { - .supply_name = "vwlan", - .microvolts = 1800000, /* 1.8V */ - .startup_delay = 50000, /* 50ms */ - .init_data = &pandora_vmmc3, -}; - -static struct platform_device pandora_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &pandora_vwlan, - }, -}; - -static struct gpiod_lookup_table pandora_vwlan_gpiod_table = { - .dev_id = "reg-fixed-voltage.1", - .table = { - /* - * As this is a low GPIO number it should be at the first - * GPIO bank. - */ - GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO, - NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static void pandora_wl1251_init_card(struct mmc_card *card) -{ - /* - * We have TI wl1251 attached to MMC3. Pass this information to - * SDIO core because it can't be probed by normal methods. - */ - if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { - card->quirks |= MMC_QUIRK_NONSTD_SDIO; - card->cccr.wide_bus = 1; - card->cis.vendor = 0x104c; - card->cis.device = 0x9066; - card->cis.blksize = 512; - card->cis.max_dtr = 24000000; - card->ocr = 0x80; - } -} - -static struct omap2_hsmmc_info pandora_mmc3[] = { - { - .mmc = 3, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, - .init_card = pandora_wl1251_init_card, - }, - {} /* Terminator */ -}; - -static void __init pandora_wl1251_init(void) -{ - struct wl1251_platform_data pandora_wl1251_pdata; - int ret; - - memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); - - pandora_wl1251_pdata.power_gpio = -1; - - ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); - if (ret < 0) - goto fail; - - pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); - if (pandora_wl1251_pdata.irq < 0) - goto fail_irq; - - pandora_wl1251_pdata.use_eeprom = true; - ret = wl1251_set_platform_data(&pandora_wl1251_pdata); - if (ret < 0) - goto fail_irq; - - return; - -fail_irq: - gpio_free(PANDORA_WIFI_IRQ_GPIO); -fail: - pr_err("wl1251 board initialisation failed\n"); -} - static void __init omap3_pandora_legacy_init(void) { platform_device_register(&pandora_backlight); - gpiod_add_lookup_table(&pandora_vwlan_gpiod_table); - platform_device_register(&pandora_vwlan_device); - omap_hsmmc_init(pandora_mmc3); - omap_hsmmc_late_init(pandora_mmc3); - pandora_wl1251_init(); } #endif /* CONFIG_ARCH_OMAP3 */ @@ -638,6 +472,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = { OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL), OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", &am35xx_emac_pdata), + OF_DEV_AUXDATA("nokia,n900-rom-rng", 0, NULL, rx51_secure_rng_call), /* McBSP modules with sidetone core */ #if IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata), @@ -690,8 +525,6 @@ static struct pdata_init pdata_quirks[] __initdata = { { "nokia,omap3-n900", nokia_n900_legacy_init, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, - { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, - { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, { "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 7ac9af56762d..01ec1ba4878b 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -148,6 +148,7 @@ int __init omap2_common_pm_late_init(void) /* Init the voltage layer */ omap3_twl_init(); omap4_twl_init(); + omap4_cpcap_init(); omap_voltage_late_init(); /* Smartreflex device init */ diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 8a55b69bca63..2a883a0c1fcd 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -107,6 +107,11 @@ extern u16 pm44xx_errata; #define IS_PM44XX_ERRATUM(id) 0 #endif +#define OMAP4_VP_CONFIG_ERROROFFSET 0x00 +#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 +#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04 +#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200 + #ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); @@ -134,6 +139,15 @@ static inline int omap4_twl_init(void) } #endif +#if IS_ENABLED(CONFIG_MFD_CPCAP) +extern int omap4_cpcap_init(void); +#else +static inline int omap4_cpcap_init(void) +{ + return -EINVAL; +} +#endif + #ifdef CONFIG_PM extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut); extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 485550af2506..5a7a949ae965 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -128,18 +128,9 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) return 0; } - /* - * Bootloader or kexec boot may have LOGICRETSTATE cleared - * for some domains. This is the case when kexec booting from - * Android kernels that support off mode for example. - * Make sure it's set at least for core and per, otherwise - * we currently will see lost GPIO interrupts for wlcore and - * smsc911x at least if per hits retention during idle. - */ if (!strncmp(pwrdm->name, "core", 4) || - !strncmp(pwrdm->name, "l4per", 5) || - !strncmp(pwrdm->name, "wkup", 4)) - pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_RET); + !strncmp(pwrdm->name, "l4per", 5)) + pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_OFF); pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC); if (!pwrst) diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c new file mode 100644 index 000000000000..eab281a5fc9f --- /dev/null +++ b/arch/arm/mach-omap2/pmic-cpcap.c @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * pmic-cpcap.c - CPCAP-specific functions for the OPP code + * + * Adapted from Motorola Mapphone Android Linux kernel + * Copyright (C) 2011 Motorola, Inc. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> + +#include "soc.h" +#include "pm.h" +#include "voltage.h" + +#include <linux/init.h> +#include "vc.h" + +/** + * omap_cpcap_vsel_to_vdc - convert CPCAP VSEL value to microvolts DC + * @vsel: CPCAP VSEL value to convert + * + * Returns the microvolts DC that the CPCAP PMIC should generate when + * programmed with @vsel. + */ +static unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel) +{ + if (vsel > 0x44) + vsel = 0x44; + return (((vsel * 125) + 6000)) * 100; +} + +/** + * omap_cpcap_uv_to_vsel - convert microvolts DC to CPCAP VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the CPCAP PMIC to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_cpcap_uv_to_vsel(unsigned long uv) +{ + if (uv < 600000) + uv = 600000; + else if (uv > 1450000) + uv = 1450000; + return DIV_ROUND_UP(uv - 600000, 12500); +} + +static struct omap_voltdm_pmic omap_cpcap_core = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 900000, + .vddmax = 1350000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x02, + .volt_reg_addr = 0x00, + .cmd_reg_addr = 0x01, + .i2c_high_speed = false, + .vsel_to_uv = omap_cpcap_vsel_to_uv, + .uv_to_vsel = omap_cpcap_uv_to_vsel, +}; + +static struct omap_voltdm_pmic omap_cpcap_iva = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 900000, + .vddmax = 1350000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x44, + .volt_reg_addr = 0x0, + .cmd_reg_addr = 0x01, + .i2c_high_speed = false, + .vsel_to_uv = omap_cpcap_vsel_to_uv, + .uv_to_vsel = omap_cpcap_uv_to_vsel, +}; + +/** + * omap_max8952_vsel_to_vdc - convert MAX8952 VSEL value to microvolts DC + * @vsel: MAX8952 VSEL value to convert + * + * Returns the microvolts DC that the MAX8952 Regulator should generate when + * programmed with @vsel. + */ +static unsigned long omap_max8952_vsel_to_uv(unsigned char vsel) +{ + if (vsel > 0x3F) + vsel = 0x3F; + return (((vsel * 100) + 7700)) * 100; +} + +/** + * omap_max8952_uv_to_vsel - convert microvolts DC to MAX8952 VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the MAX8952 Regulator to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_max8952_uv_to_vsel(unsigned long uv) +{ + if (uv < 770000) + uv = 770000; + else if (uv > 1400000) + uv = 1400000; + return DIV_ROUND_UP(uv - 770000, 10000); +} + +static struct omap_voltdm_pmic omap443x_max8952_mpu = { + .slew_rate = 16000, + .step_size = 10000, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 900000, + .vddmax = 1400000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x60, + .volt_reg_addr = 0x03, + .cmd_reg_addr = 0x03, + .i2c_high_speed = false, + .vsel_to_uv = omap_max8952_vsel_to_uv, + .uv_to_vsel = omap_max8952_uv_to_vsel, +}; + +/** + * omap_fan5355_vsel_to_vdc - convert FAN535503 VSEL value to microvolts DC + * @vsel: FAN535503 VSEL value to convert + * + * Returns the microvolts DC that the FAN535503 Regulator should generate when + * programmed with @vsel. + */ +static unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel) +{ + /* Extract bits[5:0] */ + vsel &= 0x3F; + + return (((vsel * 125) + 7500)) * 100; +} + +/** + * omap_fan535508_vsel_to_vdc - convert FAN535508 VSEL value to microvolts DC + * @vsel: FAN535508 VSEL value to convert + * + * Returns the microvolts DC that the FAN535508 Regulator should generate when + * programmed with @vsel. + */ +static unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel) +{ + /* Extract bits[5:0] */ + vsel &= 0x3F; + + if (vsel > 0x37) + vsel = 0x37; + return (((vsel * 125) + 7500)) * 100; +} + + +/** + * omap_fan535503_uv_to_vsel - convert microvolts DC to FAN535503 VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the MAX8952 Regulator to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_fan535503_uv_to_vsel(unsigned long uv) +{ + unsigned char vsel; + if (uv < 750000) + uv = 750000; + else if (uv > 1537500) + uv = 1537500; + + vsel = DIV_ROUND_UP(uv - 750000, 12500); + return vsel | 0xC0; +} + +/** + * omap_fan535508_uv_to_vsel - convert microvolts DC to FAN535508 VSEL value + * @uv: microvolts DC to convert + * + * Returns the VSEL value necessary for the MAX8952 Regulator to + * generate an output voltage equal to or greater than @uv microvolts DC. + */ +static unsigned char omap_fan535508_uv_to_vsel(unsigned long uv) +{ + unsigned char vsel; + if (uv < 750000) + uv = 750000; + else if (uv > 1437500) + uv = 1437500; + + vsel = DIV_ROUND_UP(uv - 750000, 12500); + return vsel | 0xC0; +} + +/* fan5335-core */ +static struct omap_voltdm_pmic omap4_fan_core = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 850000, + .vddmax = 1375000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x4A, + .i2c_high_speed = false, + .volt_reg_addr = 0x01, + .cmd_reg_addr = 0x01, + .vsel_to_uv = omap_fan535508_vsel_to_uv, + .uv_to_vsel = omap_fan535508_uv_to_vsel, +}; + +/* fan5335 iva */ +static struct omap_voltdm_pmic omap4_fan_iva = { + .slew_rate = 4000, + .step_size = 12500, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vddmin = 850000, + .vddmax = 1375000, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = 0x48, + .volt_reg_addr = 0x01, + .cmd_reg_addr = 0x01, + .i2c_high_speed = false, + .vsel_to_uv = omap_fan535503_vsel_to_uv, + .uv_to_vsel = omap_fan535503_uv_to_vsel, +}; + +int __init omap4_cpcap_init(void) +{ + struct voltagedomain *voltdm; + + if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap")) + return -ENODEV; + + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu); + + if (of_machine_is_compatible("motorola,droid-bionic")) { + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap_cpcap_core); + + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap_cpcap_iva); + } else { + voltdm = voltdm_lookup("core"); + omap_voltage_register_pmic(voltdm, &omap4_fan_core); + + voltdm = voltdm_lookup("iva"); + omap_voltage_register_pmic(voltdm, &omap4_fan_iva); + } + + return 0; +} + +static int __init cpcap_late_init(void) +{ + omap4_vc_set_pmic_signaling(PWRDM_POWER_RET); + + return 0; +} +omap_late_initcall(cpcap_late_init); diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 1d9346f2a4ae..25093c1e5b9a 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -745,7 +745,7 @@ struct pwrdm_ops omap4_pwrdm_operations = { static int omap44xx_prm_late_init(void); -void prm_save_context(void) +static void prm_save_context(void) { omap_prm_context.irq_enable = omap4_prm_read_inst_reg(AM43XX_PRM_OCP_SOCKET_INST, @@ -756,7 +756,7 @@ void prm_save_context(void) omap4_prcm_irq_setup.pm_ctrl); } -void prm_restore_context(void) +static void prm_restore_context(void) { omap4_prm_write_inst_reg(omap_prm_context.irq_enable, OMAP4430_PRM_OCP_SOCKET_INST, diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d76b1e5eb8ba..86f1ac4c2412 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -26,6 +26,31 @@ #include "scrm44xx.h" #include "control.h" +#define OMAP4430_VDD_IVA_I2C_DISABLE BIT(14) +#define OMAP4430_VDD_MPU_I2C_DISABLE BIT(13) +#define OMAP4430_VDD_CORE_I2C_DISABLE BIT(12) +#define OMAP4430_VDD_IVA_PRESENCE BIT(9) +#define OMAP4430_VDD_MPU_PRESENCE BIT(8) +#define OMAP4430_AUTO_CTRL_VDD_IVA(x) ((x) << 4) +#define OMAP4430_AUTO_CTRL_VDD_MPU(x) ((x) << 2) +#define OMAP4430_AUTO_CTRL_VDD_CORE(x) ((x) << 0) +#define OMAP4430_AUTO_CTRL_VDD_RET 2 + +#define OMAP4430_VDD_I2C_DISABLE_MASK \ + (OMAP4430_VDD_IVA_I2C_DISABLE | \ + OMAP4430_VDD_MPU_I2C_DISABLE | \ + OMAP4430_VDD_CORE_I2C_DISABLE) + +#define OMAP4_VDD_DEFAULT_VAL \ + (OMAP4430_VDD_I2C_DISABLE_MASK | \ + OMAP4430_VDD_IVA_PRESENCE | OMAP4430_VDD_MPU_PRESENCE | \ + OMAP4430_AUTO_CTRL_VDD_IVA(OMAP4430_AUTO_CTRL_VDD_RET) | \ + OMAP4430_AUTO_CTRL_VDD_MPU(OMAP4430_AUTO_CTRL_VDD_RET) | \ + OMAP4430_AUTO_CTRL_VDD_CORE(OMAP4430_AUTO_CTRL_VDD_RET)) + +#define OMAP4_VDD_RET_VAL \ + (OMAP4_VDD_DEFAULT_VAL & ~OMAP4430_VDD_I2C_DISABLE_MASK) + /** * struct omap_vc_channel_cfg - describe the cfg_channel bitfield * @sa: bit for slave address @@ -280,6 +305,26 @@ void omap3_vc_set_pmic_signaling(int core_next_state) } } +void omap4_vc_set_pmic_signaling(int core_next_state) +{ + struct voltagedomain *vd = vc.vd; + u32 val; + + if (!vd) + return; + + switch (core_next_state) { + case PWRDM_POWER_RET: + val = OMAP4_VDD_RET_VAL; + break; + default: + val = OMAP4_VDD_DEFAULT_VAL; + break; + } + + vd->write(val, OMAP4_PRM_VOLTCTRL_OFFSET); +} + /* * Configure signal polarity for sys_clkreq and sys_off_mode pins * as the default values are wrong and can cause the system to hang @@ -542,9 +587,19 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode) writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME); } +static void __init omap4_vc_init_pmic_signaling(struct voltagedomain *voltdm) +{ + if (vc.vd) + return; + + vc.vd = voltdm; + voltdm->write(OMAP4_VDD_DEFAULT_VAL, OMAP4_PRM_VOLTCTRL_OFFSET); +} + /* OMAP4 specific voltage init functions */ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) { + omap4_vc_init_pmic_signaling(voltdm); omap4_set_timings(voltdm, true); omap4_set_timings(voltdm, false); } @@ -615,7 +670,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm) const struct i2c_init_data *i2c_data; if (!voltdm->pmic->i2c_high_speed) { - pr_warn("%s: only high speed supported!\n", __func__); + pr_info("%s: using bootloader low-speed timings\n", __func__); return; } diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 5bf088633b62..9e861dbc2c4c 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -117,7 +117,7 @@ extern struct omap_vc_param omap4_iva_vc_data; extern struct omap_vc_param omap4_core_vc_data; void omap3_vc_set_pmic_signaling(int core_next_state); - +void omap4_vc_set_pmic_signaling(int core_next_state); void omap_vc_init_channel(struct voltagedomain *voltdm); int omap_vc_pre_scale(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 4517eb423b16..151e26ec0696 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -12,6 +12,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/gpio.h> #include <asm/mach-types.h> @@ -22,7 +23,6 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> -#include <linux/can/platform/mcp251x.h> #include <linux/regulator/machine.h> #include "generic.h" @@ -69,8 +69,9 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = { .gpio_cs = ICONTROL_MCP251x_nCS4 }; -static struct mcp251x_platform_data mcp251x_info = { - .oscillator_frequency = 16E6, +static const struct property_entry mcp251x_properties[] = { + PROPERTY_ENTRY_U32("clock-frequency", 16000000), + {} }; static struct spi_board_info mcp251x_board_info[] = { @@ -79,7 +80,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 3, .chip_select = 0, - .platform_data = &mcp251x_info, + .properties = mcp251x_properties, .controller_data = &mcp251x_chip_info1, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1) }, diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index a499ed17931e..8bfaca3a8b64 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -73,18 +73,6 @@ #define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) /* - * Timing Generator - */ -#define TG_PNLCTL 0x00 -#define TG_TPOSCTL 0x01 -#define TG_DUTYCTL 0x02 -#define TG_GPOSR 0x03 -#define TG_GPODR1 0x04 -#define TG_GPODR2 0x05 -#define TG_PINICTL 0x06 -#define TG_HPOSCTL 0x07 - -/* * PXA GPIOs */ #define TOSA_GPIO_POWERON (0) @@ -192,7 +180,4 @@ #define TOSA_KEY_MAIL KEY_MAIL #endif -struct spi_device; -extern int tosa_bl_enable(struct spi_device *spi, int enable); - #endif /* _ASM_ARCH_TOSA_H_ */ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index f537ff1c3ba7..4e13893edeb9 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -813,6 +813,26 @@ static struct pxa2xx_spi_controller pxa_ssp_master_info = { .num_chipselect = 1, }; +static struct gpiod_lookup_table tosa_lcd_gpio_table = { + .dev_id = "spi2.0", + .table = { + GPIO_LOOKUP("tc6393xb", + TOSA_GPIO_TG_ON - TOSA_TC6393XB_GPIO_BASE, + "tg #pwr", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct gpiod_lookup_table tosa_lcd_bl_gpio_table = { + .dev_id = "i2c-tosa-bl", + .table = { + GPIO_LOOKUP("tc6393xb", + TOSA_GPIO_BL_C20MA - TOSA_TC6393XB_GPIO_BASE, + "backlight", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct spi_board_info spi_board_info[] __initdata = { { .modalias = "tosa-lcd", @@ -923,6 +943,8 @@ static void __init tosa_init(void) platform_scoop_config = &tosa_pcmcia_config; pxa2xx_set_spi_info(2, &pxa_ssp_master_info); + gpiod_add_lookup_table(&tosa_lcd_gpio_table); + gpiod_add_lookup_table(&tosa_lcd_bl_gpio_table); spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL); diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index da113c8eefbf..b27fc7ac9cea 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -13,6 +13,7 @@ #include <linux/leds.h> #include <linux/irq.h> #include <linux/pm.h> +#include <linux/property.h> #include <linux/gpio.h> #include <linux/gpio/machine.h> #include <linux/serial_8250.h> @@ -27,7 +28,6 @@ #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pca953x.h> #include <linux/apm-emulation.h> -#include <linux/can/platform/mcp251x.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> @@ -428,14 +428,15 @@ static struct gpiod_lookup_table can_regulator_gpiod_table = { }, }; -static struct mcp251x_platform_data zeus_mcp2515_pdata = { - .oscillator_frequency = 16*1000*1000, +static const struct property_entry mcp251x_properties[] = { + PROPERTY_ENTRY_U32("clock-frequency", 16000000), + {} }; static struct spi_board_info zeus_spi_board_info[] = { [0] = { .modalias = "mcp2515", - .platform_data = &zeus_mcp2515_pdata, + .properties = mcp251x_properties, .irq = PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO), .max_speed_hz = 1*1000*1000, .bus_num = 3, diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 1cdb7bd3e713..9514196cad8c 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -113,7 +113,7 @@ void __init s3c2416_map_io(void) /* initialize device information early */ s3c2416_default_sdhci0(); s3c2416_default_sdhci1(); - s3c64xx_spi_setname("s3c2443-spi"); + s3c24xx_spi_setname("s3c2443-spi"); iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index 313e369c3ddd..4cbeb74cf3d6 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -91,7 +91,7 @@ void __init s3c2443_map_io(void) s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; /* initialize device information early */ - s3c64xx_spi_setname("s3c2443-spi"); + s3c24xx_spi_setname("s3c2443-spi"); iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/spi-core.h b/arch/arm/mach-s3c24xx/spi-core.h index bb555ccbe057..1048fac629a2 100644 --- a/arch/arm/mach-s3c24xx/spi-core.h +++ b/arch/arm/mach-s3c24xx/spi-core.h @@ -11,7 +11,7 @@ */ /* re-define device name depending on support. */ -static inline void s3c64xx_spi_setname(char *name) +static inline void s3c24xx_spi_setname(char *name) { #ifdef CONFIG_S3C64XX_DEV_SPI0 s3c64xx_device_spi0.name = name; diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c index 6aaaa1d8e8b9..d6b0e3b268af 100644 --- a/arch/arm/mach-s3c64xx/setup-usb-phy.c +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -73,7 +73,7 @@ static int s3c_usb_otgphy_exit(struct platform_device *pdev) return 0; } -int s5p_usb_phy_init(struct platform_device *pdev, int type) +int s3c_usb_phy_init(struct platform_device *pdev, int type) { if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_init(pdev); @@ -81,7 +81,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) return -EINVAL; } -int s5p_usb_phy_exit(struct platform_device *pdev, int type) +int s3c_usb_phy_exit(struct platform_device *pdev, int type) { if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_exit(pdev); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 9e4bc1865f84..2fd3aa6f3212 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -24,7 +24,6 @@ #include "rcar-gen2.h" static const struct of_device_id cpg_matches[] __initconst = { - { .compatible = "renesas,rcar-gen2-cpg-clocks", }, { .compatible = "renesas,r8a7743-cpg-mssr", .data = "extal" }, { .compatible = "renesas,r8a7744-cpg-mssr", .data = "extal" }, { .compatible = "renesas,r8a7790-cpg-mssr", .data = "extal" }, diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 2447427cb4a8..69f3fa270fbe 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -203,7 +203,7 @@ void tegra20_cpuidle_pcie_irqs_in_use(void) { pr_info_once( "Disabling cpuidle LP2 state, since PCIe IRQs are in use\n"); - tegra_idle_driver.states[1].disabled = true; + cpuidle_driver_state_disabled(&tegra_idle_driver, 1, true); } int __init tegra20_cpuidle_init(void) diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 67b763fea005..e3f34815c9da 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -44,16 +44,16 @@ ENTRY(tegra_resume) cmp r6, #TEGRA20 beq 1f @ Yes /* Clear the flow controller flags for this CPU. */ - cpu_to_csr_reg r1, r0 + cpu_to_csr_reg r3, r0 mov32 r2, TEGRA_FLOW_CTRL_BASE - ldr r1, [r2, r1] + ldr r1, [r2, r3] /* Clear event & intr flag */ orr r1, r1, \ #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG movw r0, #0x3FFD @ enable, cluster_switch, immed, bitmaps @ & ext flags for CPU power mgnt bic r1, r1, r0 - str r1, [r2] + str r1, [r2, r3] 1: mov32 r9, 0xc09 diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index b408fa56eb89..3341a12bbb9c 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -682,10 +682,12 @@ tegra30_enter_sleep: dsb ldr r0, [r6, r2] /* memory barrier */ + cmp r10, #TEGRA30 halted: isb dsb - wfi /* CPU should be power gated here */ + wfine /* CPU should be power gated here */ + wfeeq /* !!!FIXME!!! Implement halt failure handler */ b halted diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 3875027ef8fc..e929aaa744c0 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -84,6 +84,7 @@ static void __init ux500_init_irq(void) struct resource r; irqchip_init(); + prcmu_early_init(); np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); of_address_to_resource(np, 0, &r); of_node_put(np); @@ -91,7 +92,6 @@ static void __init ux500_init_irq(void) pr_err("could not find PRCMU base resource\n"); return; } - prcmu_early_init(r.start, r.end-r.start); ux500_pm_init(r.start, r.end-r.start); /* Unlock before init */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 0ab3a86b1f52..65e4482e3849 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -896,7 +896,10 @@ config VDSO bool "Enable VDSO for acceleration of some system calls" depends on AEABI && MMU && CPU_V7 default y if ARM_ARCH_TIMER + select HAVE_GENERIC_VDSO select GENERIC_TIME_VSYSCALL + select GENERIC_VDSO_32 + select GENERIC_GETTIMEOFDAY help Place in the process address space an ELF shared object providing fast implementations of gettimeofday and @@ -1041,7 +1044,7 @@ endif config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" - depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) + depends on (CPU_MOHAWK || CPU_PJ4) default y select OUTER_CACHE help diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 04b36436cbc0..788c5cf46de5 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -324,7 +324,7 @@ union offset_union { __put32_unaligned_check("strbt", val, addr) static void -do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs *regs, union offset_union offset) +do_alignment_finish_ldst(unsigned long addr, u32 instr, struct pt_regs *regs, union offset_union offset) { if (!LDST_U_BIT(instr)) offset.un = -offset.un; @@ -337,7 +337,7 @@ do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs } static int -do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *regs) +do_alignment_ldrhstrh(unsigned long addr, u32 instr, struct pt_regs *regs) { unsigned int rd = RD_BITS(instr); @@ -386,8 +386,7 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r } static int -do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, - struct pt_regs *regs) +do_alignment_ldrdstrd(unsigned long addr, u32 instr, struct pt_regs *regs) { unsigned int rd = RD_BITS(instr); unsigned int rd2; @@ -449,7 +448,7 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, } static int -do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *regs) +do_alignment_ldrstr(unsigned long addr, u32 instr, struct pt_regs *regs) { unsigned int rd = RD_BITS(instr); @@ -498,7 +497,7 @@ do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *reg * PU = 10 A B */ static int -do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *regs) +do_alignment_ldmstm(unsigned long addr, u32 instr, struct pt_regs *regs) { unsigned int rd, rn, correction, nr_regs, regbits; unsigned long eaddr, newaddr; @@ -539,7 +538,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg * processor for us. */ if (addr != eaddr) { - pr_err("LDMSTM: PC = %08lx, instr = %08lx, " + pr_err("LDMSTM: PC = %08lx, instr = %08x, " "addr = %08lx, eaddr = %08lx\n", instruction_pointer(regs), instr, addr, eaddr); show_regs(regs); @@ -716,10 +715,10 @@ thumb2arm(u16 tinstr) * 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt) */ static void * -do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, +do_alignment_t32_to_handler(u32 *pinstr, struct pt_regs *regs, union offset_union *poffset) { - unsigned long instr = *pinstr; + u32 instr = *pinstr; u16 tinst1 = (instr >> 16) & 0xffff; u16 tinst2 = instr & 0xffff; @@ -767,17 +766,48 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, return NULL; } +static int alignment_get_arm(struct pt_regs *regs, u32 *ip, u32 *inst) +{ + u32 instr = 0; + int fault; + + if (user_mode(regs)) + fault = get_user(instr, ip); + else + fault = probe_kernel_address(ip, instr); + + *inst = __mem_to_opcode_arm(instr); + + return fault; +} + +static int alignment_get_thumb(struct pt_regs *regs, u16 *ip, u16 *inst) +{ + u16 instr = 0; + int fault; + + if (user_mode(regs)) + fault = get_user(instr, ip); + else + fault = probe_kernel_address(ip, instr); + + *inst = __mem_to_opcode_thumb16(instr); + + return fault; +} + static int do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { union offset_union uninitialized_var(offset); - unsigned long instr = 0, instrptr; - int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs); + unsigned long instrptr; + int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs); unsigned int type; - unsigned int fault; + u32 instr = 0; u16 tinstr = 0; int isize = 4; int thumb2_32b = 0; + int fault; if (interrupts_enabled(regs)) local_irq_enable(); @@ -786,15 +816,14 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (thumb_mode(regs)) { u16 *ptr = (u16 *)(instrptr & ~1); - fault = probe_kernel_address(ptr, tinstr); - tinstr = __mem_to_opcode_thumb16(tinstr); + + fault = alignment_get_thumb(regs, ptr, &tinstr); if (!fault) { if (cpu_architecture() >= CPU_ARCH_ARMv7 && IS_T32(tinstr)) { /* Thumb-2 32-bit */ - u16 tinst2 = 0; - fault = probe_kernel_address(ptr + 1, tinst2); - tinst2 = __mem_to_opcode_thumb16(tinst2); + u16 tinst2; + fault = alignment_get_thumb(regs, ptr + 1, &tinst2); instr = __opcode_thumb32_compose(tinstr, tinst2); thumb2_32b = 1; } else { @@ -803,8 +832,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) } } } else { - fault = probe_kernel_address((void *)instrptr, instr); - instr = __mem_to_opcode_arm(instr); + fault = alignment_get_arm(regs, (void *)instrptr, &instr); } if (fault) { @@ -926,7 +954,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) * Oops, we didn't handle the instruction. */ pr_err("Alignment trap: not handling instruction " - "%0*lx at [<%08lx>]\n", + "%0*x at [<%08lx>]\n", isize << 1, isize == 2 ? tinstr : instr, instrptr); ai_skipped += 1; @@ -936,7 +964,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) ai_user += 1; if (ai_usermode & UM_WARN) - printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx " + printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*x " "Address=0x%08lx FSR 0x%03x\n", current->comm, task_pid_nr(current), instrptr, isize << 1, diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c index db9247898300..287ef898a55e 100644 --- a/arch/arm/mm/dma-mapping-nommu.c +++ b/arch/arm/mm/dma-mapping-nommu.c @@ -35,7 +35,7 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size, unsigned long attrs) { - void *ret = dma_alloc_from_global_coherent(size, dma_handle); + void *ret = dma_alloc_from_global_coherent(dev, size, dma_handle); /* * dma_alloc_from_global_coherent() may fail because: diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 7d042d5c43e3..e822af0d9219 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -529,7 +529,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) static bool __in_atomic_pool(void *start, size_t size) { - return addr_in_gen_pool(atomic_pool, (unsigned long)start, size); + return gen_pool_has_addr(atomic_pool, (unsigned long)start, size); } static int __free_from_pool(void *start, size_t size) @@ -1559,7 +1559,7 @@ static int arm_coherent_iommu_mmap_attrs(struct device *dev, * free a page as defined by the above mapping. * Must not be called with IRQs disabled. */ -void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, +static void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle, unsigned long attrs, int coherent_flag) { struct page **pages; @@ -1583,13 +1583,14 @@ void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, __iommu_free_buffer(dev, pages, size, attrs); } -void arm_iommu_free_attrs(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t handle, unsigned long attrs) +static void arm_iommu_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t handle, + unsigned long attrs) { __arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, NORMAL); } -void arm_coherent_iommu_free_attrs(struct device *dev, size_t size, +static void arm_coherent_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle, unsigned long attrs) { __arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, COHERENT); @@ -1713,7 +1714,7 @@ bad_mapping: * possible) and tagged with the appropriate dma address and length. They are * obtained via sg_dma_{address,length}. */ -int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg, +static int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir, unsigned long attrs) { return __iommu_map_sg(dev, sg, nents, dir, attrs, true); @@ -1731,7 +1732,7 @@ int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg, * tagged with the appropriate dma address and length. They are obtained via * sg_dma_{address,length}. */ -int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, +static int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir, unsigned long attrs) { return __iommu_map_sg(dev, sg, nents, dir, attrs, false); @@ -1764,8 +1765,8 @@ static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg, * Unmap a set of streaming mode DMA translations. Again, CPU access * rules concerning calls here are the same as for dma_unmap_single(). */ -void arm_coherent_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, +static void arm_coherent_iommu_unmap_sg(struct device *dev, + struct scatterlist *sg, int nents, enum dma_data_direction dir, unsigned long attrs) { __iommu_unmap_sg(dev, sg, nents, dir, attrs, true); @@ -1781,9 +1782,10 @@ void arm_coherent_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, * Unmap a set of streaming mode DMA translations. Again, CPU access * rules concerning calls here are the same as for dma_unmap_single(). */ -void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir, - unsigned long attrs) +static void arm_iommu_unmap_sg(struct device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction dir, + unsigned long attrs) { __iommu_unmap_sg(dev, sg, nents, dir, attrs, false); } @@ -1795,7 +1797,8 @@ void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, * @nents: number of buffers to map (returned from dma_map_sg) * @dir: DMA transfer direction (same as was passed to dma_map_sg) */ -void arm_iommu_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, +static void arm_iommu_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nents, enum dma_data_direction dir) { struct scatterlist *s; @@ -1813,7 +1816,8 @@ void arm_iommu_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, * @nents: number of buffers to map (returned from dma_map_sg) * @dir: DMA transfer direction (same as was passed to dma_map_sg) */ -void arm_iommu_sync_sg_for_device(struct device *dev, struct scatterlist *sg, +static void arm_iommu_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nents, enum dma_data_direction dir) { struct scatterlist *s; @@ -2015,7 +2019,7 @@ static void arm_iommu_sync_single_for_device(struct device *dev, __dma_page_cpu_to_dev(page, offset, size, dir); } -const struct dma_map_ops iommu_ops = { +static const struct dma_map_ops iommu_ops = { .alloc = arm_iommu_alloc_attrs, .free = arm_iommu_free_attrs, .mmap = arm_iommu_mmap_attrs, @@ -2037,7 +2041,7 @@ const struct dma_map_ops iommu_ops = { .dma_supported = arm_dma_supported, }; -const struct dma_map_ops iommu_coherent_ops = { +static const struct dma_map_ops iommu_coherent_ops = { .alloc = arm_coherent_iommu_alloc_attrs, .free = arm_coherent_iommu_free_attrs, .mmap = arm_coherent_iommu_mmap_attrs, @@ -2332,26 +2336,20 @@ void arch_teardown_dma_ops(struct device *dev) } #ifdef CONFIG_SWIOTLB -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_page_cpu_to_dev(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), size, dir); } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_page_dev_to_cpu(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), size, dir); } -long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr, - dma_addr_t dma_addr) -{ - return dma_to_pfn(dev, dma_addr); -} - void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs) { diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index b4be3baa83d4..3ef204137e73 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -30,6 +30,7 @@ #include <asm/prom.h> #include <asm/sections.h> #include <asm/setup.h> +#include <asm/set_memory.h> #include <asm/system_info.h> #include <asm/tlb.h> #include <asm/fixmap.h> @@ -180,7 +181,7 @@ int pfn_valid(unsigned long pfn) if (__phys_to_pfn(addr) != pfn) return 0; - return memblock_is_map_memory(__pfn_to_phys(pfn)); + return memblock_is_map_memory(addr); } EXPORT_SYMBOL(pfn_valid); #endif @@ -593,8 +594,8 @@ static inline bool arch_has_strict_perms(void) return !!(get_cr() & CR_XP); } -void set_section_perms(struct section_perm *perms, int n, bool set, - struct mm_struct *mm) +static void set_section_perms(struct section_perm *perms, int n, bool set, + struct mm_struct *mm) { size_t i; unsigned long addr; diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c index 091ddc56827e..415d0a454237 100644 --- a/arch/arm/mm/iomap.c +++ b/arch/arm/mm/iomap.c @@ -10,6 +10,8 @@ #include <linux/ioport.h> #include <linux/io.h> +#include <asm/vga.h> + unsigned long vga_base; EXPORT_SYMBOL(vga_base); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index d42b93316183..72286f9a4d30 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -382,15 +382,11 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size) EXPORT_SYMBOL(ioremap); void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size) - __alias(ioremap_cached); - -void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size) { return arch_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED, __builtin_return_address(0)); } EXPORT_SYMBOL(ioremap_cache); -EXPORT_SYMBOL(ioremap_cached); void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size) { diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 48c2888297dd..5d0d0f86e790 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -259,7 +259,7 @@ static struct mem_type mem_types[] __ro_after_init = { .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, - [MT_DEVICE_CACHED] = { /* ioremap_cached */ + [MT_DEVICE_CACHED] = { /* ioremap_cache */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PROT_SECT_DEVICE | PMD_SECT_WB, diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 24ecf8d30a1e..8b3d7191e2b8 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -206,15 +206,11 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size) EXPORT_SYMBOL(ioremap); void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size) - __alias(ioremap_cached); - -void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size) { return __arm_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED, __builtin_return_address(0)); } EXPORT_SYMBOL(ioremap_cache); -EXPORT_SYMBOL(ioremap_cached); void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size) { diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 4fa5371bc662..2785da387c91 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -491,7 +491,7 @@ cpu_arm1020_name: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1020_proc_info,#object __arm1020_proc_info: diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 5d8a8339e09a..e9ea237ed785 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -449,7 +449,7 @@ arm1020e_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1020e_proc_info,#object __arm1020e_proc_info: diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index b3dd95c345e4..920c279e7879 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -443,7 +443,7 @@ arm1022_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1022_proc_info,#object __arm1022_proc_info: diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index ac5afde12f35..0bdf25a95b10 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -138,7 +138,7 @@ ENTRY(arm1026_flush_kern_cache_all) mov ip, #0 __flush_whole_cache: #ifndef CONFIG_CPU_DCACHE_DISABLE -1: mrc p15, 0, r15, c7, c14, 3 @ test, clean, invalidate +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test, clean, invalidate bne 1b #endif tst r2, #VM_EXEC @@ -363,7 +363,7 @@ ENTRY(cpu_arm1026_switch_mm) #ifdef CONFIG_MMU mov r1, #0 #ifndef CONFIG_CPU_DCACHE_DISABLE -1: mrc p15, 0, r15, c7, c14, 3 @ test, clean, invalidate +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test, clean, invalidate bne 1b #endif #ifndef CONFIG_CPU_ICACHE_DISABLE @@ -437,7 +437,7 @@ arm1026_crval: string cpu_arm1026_name, "ARM1026EJ-S" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1026_proc_info,#object __arm1026_proc_info: diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index c99d24363f32..39361e196d61 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -172,7 +172,7 @@ arm720_crval: * See <asm/procinfo.h> for a definition of this structure. */ - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 1b4a3838393f..1a94bbf6e53f 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -128,7 +128,7 @@ __arm740_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm740_proc_info,#object __arm740_proc_info: .long 0x41807400 diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 17a4687065c7..52b66cf0259e 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -72,7 +72,7 @@ __arm7tdmi_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \ extra_hwcaps=0 diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 298c76b47749..31ac8acc34dc 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -434,7 +434,7 @@ arm920_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm920_proc_info,#object __arm920_proc_info: diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 824be3a0bc23..ca2c7ca8af21 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -412,7 +412,7 @@ arm922_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm922_proc_info,#object __arm922_proc_info: diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index d40cff8f102c..a381a0c9f109 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -477,7 +477,7 @@ arm925_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index f3cd08f353f0..1ba253c2bce1 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -131,7 +131,7 @@ __flush_whole_cache: #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache #else -1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test,clean,invalidate bne 1b #endif tst r2, #VM_EXEC @@ -358,7 +358,7 @@ ENTRY(cpu_arm926_switch_mm) mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache #else @ && 'Clean & Invalidate whole DCache' -1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate +1: mrc p15, 0, APSR_nzcv, c7, c14, 3 @ test,clean,invalidate bne 1b #endif mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache @@ -460,7 +460,7 @@ arm926_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm926_proc_info,#object __arm926_proc_info: diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 1c26d991386d..4b8a00220cc9 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -340,7 +340,7 @@ __arm940_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm940_proc_info,#object __arm940_proc_info: diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 2dc1c75a4fd4..555becf9c758 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -395,7 +395,7 @@ __arm946_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm946_proc_info,#object __arm946_proc_info: .long 0x41009460 diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 913c06e590af..ef517530130b 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -66,7 +66,7 @@ __arm9tdmi_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info, #object diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 8120b6f4dbb8..dddf833fe000 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -185,7 +185,7 @@ fa526_cr1_set: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __fa526_proc_info,#object __fa526_proc_info: diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index bb6dc34d42a3..b12b76bc8d30 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -571,7 +571,7 @@ feroceon_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index f08308578885..d47d6c5cee63 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -416,7 +416,7 @@ mohawk_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __88sv331x_proc_info,#object __88sv331x_proc_info: diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index d5bc5d702563..baba503ba816 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -196,7 +196,7 @@ sa110_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __sa110_proc_info,#object __sa110_proc_info: diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index be7b611c76c7..75ebacc8e4e5 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -239,7 +239,7 @@ sa1100_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index c1c85eb3484f..1dd0d5ca27da 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -261,7 +261,7 @@ v6_crval: string cpu_elf_name, "v6" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" /* * Match any ARMv6 processor core. diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c index 9a07916af8dd..c0fbfca5da8b 100644 --- a/arch/arm/mm/proc-v7-bugs.c +++ b/arch/arm/mm/proc-v7-bugs.c @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/arm-smccc.h> #include <linux/kernel.h> -#include <linux/psci.h> #include <linux/smp.h> #include <asm/cp15.h> @@ -65,6 +64,9 @@ static void cpu_v7_spectre_init(void) break; #ifdef CONFIG_ARM_PSCI + case ARM_CPU_PART_BRAHMA_B53: + /* Requires no workaround */ + break; default: /* Other ARM CPUs require no workaround */ if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) @@ -75,26 +77,20 @@ static void cpu_v7_spectre_init(void) case ARM_CPU_PART_CORTEX_A72: { struct arm_smccc_res res; - if (psci_ops.smccc_version == SMCCC_VERSION_1_0) - break; + arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, + ARM_SMCCC_ARCH_WORKAROUND_1, &res); + if ((int)res.a0 != 0) + return; - switch (psci_ops.conduit) { - case PSCI_CONDUIT_HVC: - arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, - ARM_SMCCC_ARCH_WORKAROUND_1, &res); - if ((int)res.a0 != 0) - break; + switch (arm_smccc_1_1_get_conduit()) { + case SMCCC_CONDUIT_HVC: per_cpu(harden_branch_predictor_fn, cpu) = call_hvc_arch_workaround_1; cpu_do_switch_mm = cpu_v7_hvc_switch_mm; spectre_v2_method = "hypervisor"; break; - case PSCI_CONDUIT_SMC: - arm_smccc_1_1_smc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, - ARM_SMCCC_ARCH_WORKAROUND_1, &res); - if ((int)res.a0 != 0) - break; + case SMCCC_CONDUIT_SMC: per_cpu(harden_branch_predictor_fn, cpu) = call_smc_arch_workaround_1; cpu_do_switch_mm = cpu_v7_smc_switch_mm; diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index c4e8006a1a8c..48e0ef6f0dcc 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -644,7 +644,7 @@ __v7_setup_stack: string cpu_elf_name, "v7" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" /* * Standard v7 proc info content diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 1448f144e7fb..84459c1d31b8 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -93,7 +93,7 @@ ENTRY(cpu_cm7_proc_fin) ret lr ENDPROC(cpu_cm7_proc_fin) - .section ".init.text", #alloc, #execinstr + .section ".init.text", "ax" __v7m_cm7_setup: mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP) @@ -132,13 +132,11 @@ __v7m_setup_cont: dsb mov r6, lr @ save LR ldr sp, =init_thread_union + THREAD_START_SP - stmia sp, {r0-r3, r12} cpsie i svc #0 1: cpsid i - ldr r0, =exc_ret - orr lr, lr, #EXC_RET_THREADMODE_PROCESSSTACK - str lr, [r0] + /* Calculate exc_ret */ + orr r10, lr, #EXC_RET_THREADMODE_PROCESSSTACK ldmia sp, {r0-r3, r12} str r5, [r12, #11 * 4] @ restore the original SVC vector entry mov lr, r6 @ restore LR @@ -179,7 +177,7 @@ ENDPROC(__v7m_setup) string cpu_elf_name "v7m" string cpu_v7m_name "ARMv7-M" - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro __v7m_proc name, initfunc, cache_fns = nop_cache_fns, hwcaps = 0, proc_fns = v7m_processor_functions .long 0 /* proc_info_list.__cpu_mm_mmu_flags */ diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 1ac0fbbe9f12..42eaecc43cfe 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -496,7 +496,7 @@ xsc3_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req .type __\name\()_proc_info,#object diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index bdb2b7749b03..18ac5a1f8922 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -610,7 +610,7 @@ xscale_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index 9a6e4923bd69..563440315acd 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -89,7 +89,7 @@ void pxa_ssp_free(struct ssp_device *ssp) ssp->use_count--; ssp->label = NULL; } else - dev_err(&ssp->pdev->dev, "device already free\n"); + dev_err(ssp->dev, "device already free\n"); mutex_unlock(&ssp_lock); } EXPORT_SYMBOL(pxa_ssp_free); @@ -118,7 +118,7 @@ static int pxa_ssp_probe(struct platform_device *pdev) if (ssp == NULL) return -ENOMEM; - ssp->pdev = pdev; + ssp->dev = dev; ssp->clk = devm_clk_get(dev, NULL); if (IS_ERR(ssp->clk)) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 1d1fa068d228..1602f6dc900b 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1010,9 +1010,9 @@ void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd) npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_usb_hsotg); if (!npd->phy_init) - npd->phy_init = s5p_usb_phy_init; + npd->phy_init = s3c_usb_phy_init; if (!npd->phy_exit) - npd->phy_exit = s5p_usb_phy_exit; + npd->phy_exit = s3c_usb_phy_exit; } #endif /* CONFIG_S3C_DEV_USB_HSOTG */ diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 94da89ecbd3b..759d66a0773a 100644 --- a/arch/arm/plat-samsung/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -7,7 +7,7 @@ #ifndef __PLAT_SAMSUNG_USB_PHY_H #define __PLAT_SAMSUNG_USB_PHY_H __FILE__ -extern int s5p_usb_phy_init(struct platform_device *pdev, int type); -extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); +extern int s3c_usb_phy_init(struct platform_device *pdev, int type); +extern int s3c_usb_phy_exit(struct platform_device *pdev, int type); #endif /* __PLAT_SAMSUNG_USB_PHY_H */ diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index 87b7769214e0..0fda344beb0b 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -1,7 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 + +# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before +# the inclusion of generic Makefile. +ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32 +include $(srctree)/lib/vdso/Makefile + hostprogs-y := vdsomunge -obj-vdso := vgettimeofday.o datapage.o +obj-vdso := vgettimeofday.o datapage.o note.o # Build rules targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.so.raw vdso.lds @@ -24,7 +30,11 @@ CFLAGS_REMOVE_vdso.o = -pg # Force -O2 to avoid libgcc dependencies CFLAGS_REMOVE_vgettimeofday.o = -pg -Os +ifeq ($(c-gettimeofday-y),) CFLAGS_vgettimeofday.o = -O2 +else +CFLAGS_vgettimeofday.o = -O2 -include $(c-gettimeofday-y) +endif # Disable gcov profiling for VDSO code GCOV_PROFILE := n @@ -37,7 +47,7 @@ $(obj)/vdso.o : $(obj)/vdso.so # Link rule for the .so file $(obj)/vdso.so.raw: $(obj)/vdso.lds $(obj-vdso) FORCE - $(call if_changed,ld) + $(call if_changed,vdsold_and_vdso_check) $(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/vdsomunge FORCE $(call if_changed,vdsomunge) @@ -47,6 +57,10 @@ $(obj)/%.so: OBJCOPYFLAGS := -S $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) +# Actual build commands +quiet_cmd_vdsold_and_vdso_check = LD $@ + cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check) + quiet_cmd_vdsomunge = MUNGE $@ cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@ diff --git a/arch/arm/vdso/note.c b/arch/arm/vdso/note.c new file mode 100644 index 000000000000..eff5bf9efb8b --- /dev/null +++ b/arch/arm/vdso/note.c @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012-2018 ARM Limited + * + * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text. + * Here we can supply some information useful to userland. + */ + +#include <linux/uts.h> +#include <linux/version.h> +#include <linux/elfnote.h> +#include <linux/build-salt.h> + +ELFNOTE32("Linux", 0, LINUX_VERSION_CODE); +BUILD_SALT; diff --git a/arch/arm/vdso/vdso.lds.S b/arch/arm/vdso/vdso.lds.S index 73cf205b003e..165d1d2eb76b 100644 --- a/arch/arm/vdso/vdso.lds.S +++ b/arch/arm/vdso/vdso.lds.S @@ -71,6 +71,8 @@ VERSION global: __vdso_clock_gettime; __vdso_gettimeofday; + __vdso_clock_getres; + __vdso_clock_gettime64; local: *; }; } diff --git a/arch/arm/vdso/vgettimeofday.c b/arch/arm/vdso/vgettimeofday.c index d1fdbb12760a..1976c6f325a4 100644 --- a/arch/arm/vdso/vgettimeofday.c +++ b/arch/arm/vdso/vgettimeofday.c @@ -1,259 +1,34 @@ // SPDX-License-Identifier: GPL-2.0-only /* + * ARM userspace implementations of gettimeofday() and similar. + * * Copyright 2015 Mentor Graphics Corporation. */ - -#include <linux/compiler.h> -#include <linux/hrtimer.h> #include <linux/time.h> -#include <asm/barrier.h> -#include <asm/bug.h> -#include <asm/cp15.h> -#include <asm/page.h> -#include <asm/unistd.h> -#include <asm/vdso_datapage.h> - -#ifndef CONFIG_AEABI -#error This code depends on AEABI system call conventions -#endif - -extern struct vdso_data *__get_datapage(void); - -static notrace u32 __vdso_read_begin(const struct vdso_data *vdata) -{ - u32 seq; -repeat: - seq = READ_ONCE(vdata->seq_count); - if (seq & 1) { - cpu_relax(); - goto repeat; - } - return seq; -} - -static notrace u32 vdso_read_begin(const struct vdso_data *vdata) -{ - u32 seq; - - seq = __vdso_read_begin(vdata); - - smp_rmb(); /* Pairs with smp_wmb in vdso_write_end */ - return seq; -} +#include <linux/types.h> -static notrace int vdso_read_retry(const struct vdso_data *vdata, u32 start) +int __vdso_clock_gettime(clockid_t clock, + struct old_timespec32 *ts) { - smp_rmb(); /* Pairs with smp_wmb in vdso_write_begin */ - return vdata->seq_count != start; + return __cvdso_clock_gettime32(clock, ts); } -static notrace long clock_gettime_fallback(clockid_t _clkid, - struct timespec *_ts) +int __vdso_clock_gettime64(clockid_t clock, + struct __kernel_timespec *ts) { - register struct timespec *ts asm("r1") = _ts; - register clockid_t clkid asm("r0") = _clkid; - register long ret asm ("r0"); - register long nr asm("r7") = __NR_clock_gettime; - - asm volatile( - " swi #0\n" - : "=r" (ret) - : "r" (clkid), "r" (ts), "r" (nr) - : "memory"); - - return ret; + return __cvdso_clock_gettime(clock, ts); } -static notrace int do_realtime_coarse(struct timespec *ts, - struct vdso_data *vdata) +int __vdso_gettimeofday(struct __kernel_old_timeval *tv, + struct timezone *tz) { - u32 seq; - - do { - seq = vdso_read_begin(vdata); - - ts->tv_sec = vdata->xtime_coarse_sec; - ts->tv_nsec = vdata->xtime_coarse_nsec; - - } while (vdso_read_retry(vdata, seq)); - - return 0; + return __cvdso_gettimeofday(tv, tz); } -static notrace int do_monotonic_coarse(struct timespec *ts, - struct vdso_data *vdata) +int __vdso_clock_getres(clockid_t clock_id, + struct old_timespec32 *res) { - struct timespec tomono; - u32 seq; - - do { - seq = vdso_read_begin(vdata); - - ts->tv_sec = vdata->xtime_coarse_sec; - ts->tv_nsec = vdata->xtime_coarse_nsec; - - tomono.tv_sec = vdata->wtm_clock_sec; - tomono.tv_nsec = vdata->wtm_clock_nsec; - - } while (vdso_read_retry(vdata, seq)); - - ts->tv_sec += tomono.tv_sec; - timespec_add_ns(ts, tomono.tv_nsec); - - return 0; -} - -#ifdef CONFIG_ARM_ARCH_TIMER - -static notrace u64 get_ns(struct vdso_data *vdata) -{ - u64 cycle_delta; - u64 cycle_now; - u64 nsec; - - isb(); - cycle_now = read_sysreg(CNTVCT); - - cycle_delta = (cycle_now - vdata->cs_cycle_last) & vdata->cs_mask; - - nsec = (cycle_delta * vdata->cs_mult) + vdata->xtime_clock_snsec; - nsec >>= vdata->cs_shift; - - return nsec; -} - -static notrace int do_realtime(struct timespec *ts, struct vdso_data *vdata) -{ - u64 nsecs; - u32 seq; - - do { - seq = vdso_read_begin(vdata); - - if (!vdata->tk_is_cntvct) - return -1; - - ts->tv_sec = vdata->xtime_clock_sec; - nsecs = get_ns(vdata); - - } while (vdso_read_retry(vdata, seq)); - - ts->tv_nsec = 0; - timespec_add_ns(ts, nsecs); - - return 0; -} - -static notrace int do_monotonic(struct timespec *ts, struct vdso_data *vdata) -{ - struct timespec tomono; - u64 nsecs; - u32 seq; - - do { - seq = vdso_read_begin(vdata); - - if (!vdata->tk_is_cntvct) - return -1; - - ts->tv_sec = vdata->xtime_clock_sec; - nsecs = get_ns(vdata); - - tomono.tv_sec = vdata->wtm_clock_sec; - tomono.tv_nsec = vdata->wtm_clock_nsec; - - } while (vdso_read_retry(vdata, seq)); - - ts->tv_sec += tomono.tv_sec; - ts->tv_nsec = 0; - timespec_add_ns(ts, nsecs + tomono.tv_nsec); - - return 0; -} - -#else /* CONFIG_ARM_ARCH_TIMER */ - -static notrace int do_realtime(struct timespec *ts, struct vdso_data *vdata) -{ - return -1; -} - -static notrace int do_monotonic(struct timespec *ts, struct vdso_data *vdata) -{ - return -1; -} - -#endif /* CONFIG_ARM_ARCH_TIMER */ - -notrace int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts) -{ - struct vdso_data *vdata; - int ret = -1; - - vdata = __get_datapage(); - - switch (clkid) { - case CLOCK_REALTIME_COARSE: - ret = do_realtime_coarse(ts, vdata); - break; - case CLOCK_MONOTONIC_COARSE: - ret = do_monotonic_coarse(ts, vdata); - break; - case CLOCK_REALTIME: - ret = do_realtime(ts, vdata); - break; - case CLOCK_MONOTONIC: - ret = do_monotonic(ts, vdata); - break; - default: - break; - } - - if (ret) - ret = clock_gettime_fallback(clkid, ts); - - return ret; -} - -static notrace long gettimeofday_fallback(struct timeval *_tv, - struct timezone *_tz) -{ - register struct timezone *tz asm("r1") = _tz; - register struct timeval *tv asm("r0") = _tv; - register long ret asm ("r0"); - register long nr asm("r7") = __NR_gettimeofday; - - asm volatile( - " swi #0\n" - : "=r" (ret) - : "r" (tv), "r" (tz), "r" (nr) - : "memory"); - - return ret; -} - -notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) -{ - struct timespec ts; - struct vdso_data *vdata; - int ret; - - vdata = __get_datapage(); - - ret = do_realtime(&ts, vdata); - if (ret) - return gettimeofday_fallback(tv, tz); - - if (tv) { - tv->tv_sec = ts.tv_sec; - tv->tv_usec = ts.tv_nsec / 1000; - } - if (tz) { - tz->tz_minuteswest = vdata->tz_minuteswest; - tz->tz_dsttime = vdata->tz_dsttime; - } - - return ret; + return __cvdso_clock_getres_time32(clock_id, res); } /* Avoid unresolved references emitted by GCC */ diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 38fa917c8585..d40e9e5fc52b 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -15,6 +15,7 @@ #include <xen/interface/grant_table.h> #include <xen/interface/memory.h> #include <xen/page.h> +#include <xen/xen-ops.h> #include <xen/swiotlb-xen.h> #include <asm/cacheflush.h> @@ -70,20 +71,20 @@ static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op) * pfn_valid returns true the pages is local and we can use the native * dma-direct functions, otherwise we call the Xen specific version. */ -void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle, - phys_addr_t paddr, size_t size, enum dma_data_direction dir) +void xen_dma_sync_for_cpu(dma_addr_t handle, phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { if (pfn_valid(PFN_DOWN(handle))) - arch_sync_dma_for_cpu(dev, paddr, size, dir); + arch_sync_dma_for_cpu(paddr, size, dir); else if (dir != DMA_TO_DEVICE) dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL); } -void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle, - phys_addr_t paddr, size_t size, enum dma_data_direction dir) +void xen_dma_sync_for_device(dma_addr_t handle, phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { if (pfn_valid(PFN_DOWN(handle))) - arch_sync_dma_for_device(dev, paddr, size, dir); + arch_sync_dma_for_device(paddr, size, dir); else if (dir == DMA_FROM_DEVICE) dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL); else @@ -133,7 +134,7 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order) return; } -int __init xen_mm_init(void) +static int __init xen_mm_init(void) { struct gnttab_cache_flush cflush; if (!xen_initial_domain()) |