Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
 "Another merge window, another pull full of stuff:

   1) Support alternative names for network devices, from Jiri Pirko.

   2) Introduce per-netns netdev notifiers, also from Jiri Pirko.

   3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
      Larsen.

   4) Allow compiling out the TLS TOE code, from Jakub Kicinski.

   5) Add several new tracepoints to the kTLS code, also from Jakub.

   6) Support set channels ethtool callback in ena driver, from Sameeh
      Jubran.

   7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
      SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.

   8) Add XDP support to mvneta driver, from Lorenzo Bianconi.

   9) Lots of netfilter hw offload fixes, cleanups and enhancements,
      from Pablo Neira Ayuso.

  10) PTP support for aquantia chips, from Egor Pomozov.

  11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
      Josh Hunt.

  12) Add smart nagle to tipc, from Jon Maloy.

  13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
      Duvvuru.

  14) Add a flow mask cache to OVS, from Tonghao Zhang.

  15) Add XDP support to ice driver, from Maciej Fijalkowski.

  16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.

  17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.

  18) Support it in stmmac driver too, from Jose Abreu.

  19) Support TIPC encryption and auth, from Tuong Lien.

  20) Introduce BPF trampolines, from Alexei Starovoitov.

  21) Make page_pool API more numa friendly, from Saeed Mahameed.

  22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.

  23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
  libbpf: Fix usage of u32 in userspace code
  mm: Implement no-MMU variant of vmalloc_user_node_flags
  slip: Fix use-after-free Read in slip_open
  net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
  macvlan: schedule bc_work even if error
  enetc: add support Credit Based Shaper(CBS) for hardware offload
  net: phy: add helpers phy_(un)lock_mdio_bus
  mdio_bus: don't use managed reset-controller
  ax88179_178a: add ethtool_op_get_ts_info()
  mlxsw: spectrum_router: Fix use of uninitialized adjacency index
  mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
  bpf: Simplify __bpf_arch_text_poke poke type handling
  bpf: Introduce BPF_TRACE_x helper for the tracing tests
  bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
  bpf, testing: Add various tail call test cases
  bpf, x86: Emit patchable direct jump as tail call
  bpf: Constant map key tracking for prog array pokes
  bpf: Add poke dependency tracking for prog array maps
  bpf: Add initial poke descriptor table for jit images
  bpf: Move owner type, jited info into array auxiliary data
  ...

8 files changed, 100 insertions, 13 deletions

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 0aaacea1d887..820ce3b60bb6 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -186,3 +186,30 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0_sw>;
+	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1_sw>;
+	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	ethphy0_sw: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1_sw: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index ea1c119feaa5..c3d966904d64 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -27,3 +27,8 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 7935d70874ce..fa0088025b2c 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -35,3 +35,8 @@
 	pinctrl-1 = <&mmc2_pins_default>;
 	pinctrl-2 = <&mmc2_pins_default>;
 };
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 423855a2a2d6..398721c7201c 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -363,11 +363,6 @@
 	ext-clk-src;
 };
 
-&mac {
-	status = "okay";
-	dual_emac;
-};
-
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 5cac2dd58241..37e048771b0f 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3079,6 +3079,58 @@
 					phys = <&phy_gmii_sel 2>;
 				};
 			};
+
+			mac_sw: switch@0 {
+				compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
+				reg = <0x0 0x4000>;
+				ranges = <0 0 0x4000>;
+				clocks = <&gmac_main_clk>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
+				interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+				ethernet-ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cpsw_port1: port@1 {
+						reg = <1>;
+						label = "port1";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1>;
+					};
+
+					cpsw_port2: port@2 {
+						reg = <2>;
+						label = "port2";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2>;
+					};
+				};
+
+				davinci_mdio_sw: mdio@1000 {
+					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&gmac_main_clk>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
+				};
+
+				cpts {
+					clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+					clock-names = "cpts";
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 40d7f1a4fc45..89cce8d4bc6b 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -554,3 +554,4 @@ CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_TI_CPSW_SWITCHDEV=y
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 865b10344ea2..0474a4b1394d 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -12,6 +12,7 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
@@ -22,7 +23,6 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
-#include <linux/can/platform/mcp251x.h>
 #include <linux/regulator/machine.h>
 
 #include "generic.h"
@@ -69,8 +69,9 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
 	.gpio_cs        = ICONTROL_MCP251x_nCS4
 };
 
-static struct mcp251x_platform_data mcp251x_info = {
-	.oscillator_frequency = 16E6,
+static const struct property_entry mcp251x_properties[] = {
+	PROPERTY_ENTRY_U32("clock-frequency", 16000000),
+	{}
 };
 
 static struct spi_board_info mcp251x_board_info[] = {
@@ -79,7 +80,7 @@ static struct spi_board_info mcp251x_board_info[] = {
 		.max_speed_hz    = 6500000,
 		.bus_num         = 3,
 		.chip_select     = 0,
-		.platform_data   = &mcp251x_info,
+		.properties      = mcp251x_properties,
 		.controller_data = &mcp251x_chip_info1,
 		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
 	},
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index da113c8eefbf..b27fc7ac9cea 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -13,6 +13,7 @@
 #include <linux/leds.h>
 #include <linux/irq.h>
 #include <linux/pm.h>
+#include <linux/property.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/serial_8250.h>
@@ -27,7 +28,6 @@
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/pca953x.h>
 #include <linux/apm-emulation.h>
-#include <linux/can/platform/mcp251x.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
@@ -428,14 +428,15 @@ static struct gpiod_lookup_table can_regulator_gpiod_table = {
 	},
 };
 
-static struct mcp251x_platform_data zeus_mcp2515_pdata = {
-	.oscillator_frequency	= 16*1000*1000,
+static const struct property_entry mcp251x_properties[] = {
+	PROPERTY_ENTRY_U32("clock-frequency", 16000000),
+	{}
 };
 
 static struct spi_board_info zeus_spi_board_info[] = {
 	[0] = {
 		.modalias	= "mcp2515",
-		.platform_data	= &zeus_mcp2515_pdata,
+		.properties	= mcp251x_properties,
 		.irq		= PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
 		.max_speed_hz	= 1*1000*1000,
 		.bus_num	= 3,