diff options
| author | Biju Das <biju.das@bp.renesas.com> | 2017-08-08 11:56:33 +0100 |
|---|---|---|
| committer | Simon Horman <horms+renesas@verge.net.au> | 2017-08-17 10:33:01 +0200 |
| commit | 0417814ea140d1bc7e8a5d54e95e17a234b34e49 (patch) | |
| tree | a6cb0780aee5c9b10f7469a1636f03fbc88625d6 /arch/arm | |
| parent | 60dce695b097a52e6ea5874aa80301f2e4ac627a (diff) | |
| download | linux-0417814ea140d1bc7e8a5d54e95e17a234b34e49.tar.bz2 | |
ARM: dts: r8a7743: Add OPP table for frequency scaling
Add needed information inside CPU0 for the generic cpufreq-cpu0 driver.
- clock-latency = 300 us
Approximate worst-case latency to do clock transition for every
OPPs. Using an arbitrary safe value similar to r8a7791(R-Car M2) Soc.
- operating-points = < kHz - uV >
List of 6 operating points. All of them are using the same voltage
since DVS is not supported in RZ/G1 Soc.
Note:This also fixes the below errors seen on kernel logs
[ 0.876877] cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)
[ 0.883727] cpu cpu1: cpufreq_init: failed to get clk: -2
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/r8a7743.dtsi | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index ec9db0fcffc6..14222c72f0e0 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -38,8 +38,17 @@ reg = <0>; clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; + clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7743_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; cpu1: cpu@1 { |