Merge branch 'at91/defconfig' into next/cleanup

120 files changed, 775 insertions, 611 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 44789eff983f..e084b7e981e8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1231,7 +1231,7 @@ config ARM_ERRATA_742231
 	  capabilities of the processor.
 
 config PL310_ERRATA_588369
-	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
 	depends on CACHE_L2X0
 	help
 	   The PL310 L2 cache controller implements three types of Clean &
@@ -1256,7 +1256,7 @@ config ARM_ERRATA_720789
 	  entries regardless of the ASID.
 
 config PL310_ERRATA_727915
-	bool "Background Clean & Invalidate by Way operation can cause data corruption"
+	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
 	depends on CACHE_L2X0
 	help
 	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
@@ -1289,8 +1289,8 @@ config ARM_ERRATA_751472
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
 
-config ARM_ERRATA_753970
-	bool "ARM errata: cache sync operation may be faulty"
+config PL310_ERRATA_753970
+	bool "PL310 errata: cache sync operation may be faulty"
 	depends on CACHE_PL310
 	help
 	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
@@ -1352,6 +1352,18 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config PL310_ERRATA_769419
+	bool "PL310 errata: no automatic Store Buffer drain"
+	depends on CACHE_L2X0
+	help
+	  On revisions of the PL310 prior to r3p2, the Store Buffer does
+	  not automatically drain. This can cause normal, non-cacheable
+	  writes to be retained when the memory system is idle, leading
+	  to suboptimal I/O performance for drivers using coherent DMA.
+	  This option adds a write barrier to the cpu_idle loop so that,
+	  on systems with an outer cache, the store buffer is drained
+	  explicitly.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 0e6ae470c94f..410a546060a2 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -526,7 +526,8 @@ static void __init gic_pm_init(struct gic_chip_data *gic)
 		sizeof(u32));
 	BUG_ON(!gic->saved_ppi_conf);
 
-	cpu_pm_register_notifier(&gic_notifier_block);
+	if (gic == &gic_data[0])
+		cpu_pm_register_notifier(&gic_notifier_block);
 }
 #else
 static void __init gic_pm_init(struct gic_chip_data *gic)
@@ -581,13 +582,16 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
 	 * For primary GICs, skip over SGIs.
 	 * For secondary GICs, skip over PPIs, too.
 	 */
+	domain->hwirq_base = 32;
 	if (gic_nr == 0) {
 		gic_cpu_base_addr = cpu_base;
-		domain->hwirq_base = 16;
-		if (irq_start > 0)
-			irq_start = (irq_start & ~31) + 16;
-	} else
-		domain->hwirq_base = 32;
+
+		if ((irq_start & 31) > 0) {
+			domain->hwirq_base = 16;
+			if (irq_start != -1)
+				irq_start = (irq_start & ~31) + 16;
+		}
+	}
 
 	/*
 	 * Find out how many interrupts are supported.
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 7129cfbdacd6..f407a6b35d3d 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1211,8 +1211,8 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
 	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
 	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
 
-	ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
-	ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
+	ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+	ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
 
 	ccr |= (rqc->swap << CC_SWAP_SHFT);
 
@@ -1623,6 +1623,11 @@ static inline int _alloc_event(struct pl330_thread *thrd)
 	return -1;
 }
 
+static bool _chan_ns(const struct pl330_info *pi, int i)
+{
+	return pi->pcfg.irq_ns & (1 << i);
+}
+
 /* Upon success, returns IdentityToken for the
  * allocated channel, NULL otherwise.
  */
@@ -1647,7 +1652,8 @@ void *pl330_request_channel(const struct pl330_info *pi)
 
 	for (i = 0; i < chans; i++) {
 		thrd = &pl330->channels[i];
-		if (thrd->free) {
+		if ((thrd->free) && (!_manager_ns(thrd) ||
+					_chan_ns(pi, i))) {
 			thrd->ev = _alloc_event(thrd);
 			if (thrd->ev >= 0) {
 				thrd->free = false;
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9_defconfig
index ffb1edd93363..8826eb218e73 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9_defconfig
@@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
@@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
@@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index 38cb7c985426..bbe4e1a1f5d8 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -56,7 +55,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_CHAR=y
@@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
@@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_TUN=m
+CONFIG_ARM_AT91_ETHER=y
 CONFIG_PHYLIB=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=y
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
@@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
@@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
@@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260_defconfig
index f8a9226413bf..505b3765f87e 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260_defconfig
@@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
 CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
@@ -33,12 +45,10 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -55,7 +65,6 @@ CONFIG_I2C_GPIO=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
@@ -71,7 +80,6 @@ CONFIG_USB_G_SERIAL=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 9e90e6d79297..9123568d9a8d 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G20=y
 CONFIG_MACH_AT91SAM9G20EK=y
 CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+CONFIG_MACH_CPU9G20=y
+CONFIG_MACH_ACMENETUSFOXG20=y
+CONFIG_MACH_PORTUXG20=y
+CONFIG_MACH_STAMP9G20=y
+CONFIG_MACH_PCONTROL_G20=y
+CONFIG_MACH_GSIA18S=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
@@ -21,9 +30,10 @@ CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -37,8 +47,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -48,17 +56,13 @@ CONFIG_MTD_NAND_ATMEL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
@@ -66,15 +70,14 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_HW_RANDOM=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SEQUENCER=y
@@ -82,7 +85,6 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_AT73C213=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
@@ -105,7 +107,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
index c5876d244f4b..606d48f3b8f8 100644
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G45=y
 CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 CONFIG_AEABI=y
@@ -73,11 +74,8 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_MII=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_DAVICOM_PHY=y
 CONFIG_LIBERTAS_THINFIRM=m
 CONFIG_LIBERTAS_THINFIRM_USB=m
 CONFIG_AT76C50X_USB=m
@@ -131,7 +129,6 @@ CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
 CONFIG_FB_UDL=m
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rl_defconfig
index 75621e4d03fc..ad562ee64209 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -23,8 +23,6 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
@@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_MMC=y
 CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 227a477346ed..d95763d5f0d8 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -287,7 +287,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 176ec22af034..fd996bb13022 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -263,7 +263,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index a88e64d4e9a5..443675d317e6 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -132,7 +132,7 @@ CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7b63462b349d..945a34f2a34d 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -48,13 +48,7 @@ CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-CONFIG_OMAP_ARM_216MHZ=y
-CONFIG_OMAP_ARM_195MHZ=y
-CONFIG_OMAP_ARM_192MHZ=y
 CONFIG_OMAP_ARM_182MHZ=y
-CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
 # CONFIG_ARM_THUMB is not set
 CONFIG_PCCARD=y
 CONFIG_OMAP_CF=y
diff --git a/arch/arm/configs/pcontrol_g20_defconfig b/arch/arm/configs/pcontrol_g20_defconfig
deleted file mode 100644
index c75c9fcede58..000000000000
--- a/arch/arm/configs/pcontrol_g20_defconfig
+++ /dev/null
@@ -1,175 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="/opt/arm-2010q1/bin/arm-none-linux-gnueabi-"
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_PCONTROL_G20=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 mem=128M mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) root=/dev/mmcblk0p1 rootwait rw"
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_AT24=m
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MACVLAN=m
-CONFIG_TUN=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-CONFIG_SMSC911X=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_MPPE=m
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_MATRIX=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_MAX3100=m
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_R3964=m
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_GPIO=m
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_W1=m
-CONFIG_W1_MASTER_GPIO=m
-CONFIG_W1_SLAVE_DS2431=m
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_AUXDISPLAY=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV=y
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_IIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 4a5a12681be2..374000ec4e4e 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_U300=y
 CONFIG_MACH_U300=y
 CONFIG_MACH_U300_BS335=y
-CONFIG_MACH_U300_DUAL_RAM=y
-CONFIG_U300_DEBUG=y
 CONFIG_MACH_U300_SPIDUMMY=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_HWMON is not set
@@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 97d31a4663da..2d7b6e7b7271 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_U8500=y
 CONFIG_UX500_SOC_DB5500=y
 CONFIG_UX500_SOC_DB8500=y
-CONFIG_MACH_U8500=y
+CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
 CONFIG_NO_HZ=y
@@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@@ -72,15 +70,12 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
-# CONFIG_HWMON is not set
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
+CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
 CONFIG_USB_GADGET=y
 CONFIG_AB8500_USB=y
 CONFIG_MMC=y
@@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
+CONFIG_HSEM_U8500=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 59577ad3f4ef..547a3c1e59db 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 71d99b83cdb9..0bda22c094a6 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -55,16 +55,6 @@ reserve_pmu(enum arm_pmu_type type);
 extern void
 release_pmu(enum arm_pmu_type type);
 
-/**
- * init_pmu() - Initialise the PMU.
- *
- * Initialise the system ready for PMU enabling. This should typically set the
- * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
- * the actual hardware initialisation.
- */
-extern int
-init_pmu(enum arm_pmu_type type);
-
 #else /* CONFIG_CPU_HAS_PMU */
 
 #include <linux/err.h>
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index a7e457ed27c3..58b8b84adcd2 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -25,7 +25,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS];
 
 void init_cpu_topology(void);
 void store_cpu_topology(unsigned int cpuid);
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+const struct cpumask *cpu_coregroup_mask(int cpu);
 
 #else
 
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 9ad50c4208ae..b145f16c91bc 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -497,7 +497,7 @@ ENDPROC(__und_usr)
 	.popsection
 	.pushsection __ex_table,"a"
 	.long	1b, 4b
-#if __LINUX_ARM_ARCH__ >= 7
+#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
 	.long	2b, 4b
 	.long	3b, 4b
 #endif
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 9fe8910308af..8a30c89da70e 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -519,10 +519,12 @@ static const union decode_item arm_cccc_0000_____1001_table[] = {
 static const union decode_item arm_cccc_0001_____1001_table[] = {
 	/* Synchronization primitives					*/
 
+#if __LINUX_ARM_ARCH__ < 6
+	/* Deprecated on ARMv6 and may be UNDEFINED on v7		*/
 	/* SMP/SWPB		cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
 	DECODE_EMULATEX	(0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
 						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
+#endif
 	/* LDREX/STREX{,D,B,H}	cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
 	/* And unallocated instructions...				*/
 	DECODE_END
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index fc82de8bdcce..ba32b393b3f0 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -427,18 +427,25 @@ void kprobe_arm_test_cases(void)
 
 	TEST_GROUP("Synchronization primitives")
 
-	/*
-	 * Use hard coded constants for SWP instructions to avoid warnings
-	 * about deprecated instructions.
-	 */
-	TEST_RP( ".word 0xe108e097 @ swp	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R(  ".word 0x610d0091 @ swpvs	r0, r",1,VAL1,", [sp]")
-	TEST_RP( ".word 0xe10cd09e @ swp	sp, r",14,VAL2,", [r",12,13*4,"]")
+#if __LINUX_ARM_ARCH__ < 6
+	TEST_RP("swp	lr, r",7,VAL2,", [r",8,0,"]")
+	TEST_R( "swpvs	r0, r",1,VAL1,", [sp]")
+	TEST_RP("swp	sp, r",14,VAL2,", [r",12,13*4,"]")
+#else
+	TEST_UNSUPPORTED(".word 0xe108e097 @ swp	lr, r7, [r8]")
+	TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs	r0, r1, [sp]")
+	TEST_UNSUPPORTED(".word 0xe10cd09e @ swp	sp, r14 [r12]")
+#endif
 	TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
 	TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
 	TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
-	TEST_RP( ".word 0xe148e097 @ swpb	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R(  ".word 0x614d0091 @ swpvsb	r0, r",1,VAL1,", [sp]")
+#if __LINUX_ARM_ARCH__ < 6
+	TEST_RP("swpb	lr, r",7,VAL2,", [r",8,0,"]")
+	TEST_R( "swpvsb	r0, r",1,VAL1,", [sp]")
+#else
+	TEST_UNSUPPORTED(".word 0xe148e097 @ swpb	lr, r7, [r8]")
+	TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb	r0, r1, [sp]")
+#endif
 	TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
 
 	TEST_UNSUPPORTED(".word	0xe1100090") /* Unallocated space */
@@ -550,7 +557,7 @@ void kprobe_arm_test_cases(void)
 	TEST_RPR(  "strccd	r",8, VAL2,", [r",13,0, ", r",12,48,"]")
 	TEST_RPR(  "strd	r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
 	TEST_RPR(  "strcsd	r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
-	TEST_RPR(  "strd	r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+	TEST_RPR(  "strd	r",2, VAL1,", [r",5, 24,"], r",4,48,"")
 	TEST_RPR(  "strd	r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
 	TEST_UNSUPPORTED(".word 0xe1afc0fa	@ strd r12, [pc, r10]!")
 
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
index 5e726c31c45a..5d8b85792222 100644
--- a/arch/arm/kernel/kprobes-test-thumb.c
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -222,8 +222,8 @@ void kprobe_thumb16_test_cases(void)
 DONT_TEST_IN_ITBLOCK(
 	TEST_BF_R(  "cbnz	r",0,0, ", 2f")
 	TEST_BF_R(  "cbz	r",2,-1,", 2f")
-	TEST_BF_RX( "cbnz	r",4,1, ", 2f",0x20)
-	TEST_BF_RX( "cbz	r",7,0, ", 2f",0x40)
+	TEST_BF_RX( "cbnz	r",4,1, ", 2f", SPACE_0x20)
+	TEST_BF_RX( "cbz	r",7,0, ", 2f", SPACE_0x40)
 )
 	TEST_R("sxth	r0, r",7, HH1,"")
 	TEST_R("sxth	r7, r",0, HH2,"")
@@ -246,7 +246,7 @@ DONT_TEST_IN_ITBLOCK(
 	TESTCASE_START(code)		\
 	TEST_ARG_PTR(13, offset)	\
 	TEST_ARG_END("")		\
-	TEST_BRANCH_F(code,0)		\
+	TEST_BRANCH_F(code)		\
 	TESTCASE_END
 
 	TEST("push	{r0}")
@@ -319,8 +319,8 @@ CONDITION_INSTRUCTIONS(8,
 
 	TEST_BF(  "b	2f")
 	TEST_BB(  "b	2b")
-	TEST_BF_X("b	2f", 0x400)
-	TEST_BB_X("b	2b", 0x400)
+	TEST_BF_X("b	2f", SPACE_0x400)
+	TEST_BB_X("b	2b", SPACE_0x400)
 
 	TEST_GROUP("Testing instructions in IT blocks")
 
@@ -746,7 +746,7 @@ CONDITION_INSTRUCTIONS(22,
 	TEST_BB("bne.w	2b")
 	TEST_BF("bgt.w	2f")
 	TEST_BB("blt.w	2b")
-	TEST_BF_X("bpl.w	2f",0x1000)
+	TEST_BF_X("bpl.w	2f", SPACE_0x1000)
 )
 
 	TEST_UNSUPPORTED("msr	cpsr, r0")
@@ -786,11 +786,11 @@ CONDITION_INSTRUCTIONS(22,
 
 	TEST_BF(  "b.w	2f")
 	TEST_BB(  "b.w	2b")
-	TEST_BF_X("b.w	2f", 0x1000)
+	TEST_BF_X("b.w	2f", SPACE_0x1000)
 
 	TEST_BF(  "bl.w	2f")
 	TEST_BB(  "bl.w	2b")
-	TEST_BB_X("bl.w	2b", 0x1000)
+	TEST_BB_X("bl.w	2b", SPACE_0x1000)
 
 	TEST_X(	"blx	__dummy_arm_subroutine",
 		".arm				\n\t"
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
index 0dc5d77b9356..e28a869b1ae4 100644
--- a/arch/arm/kernel/kprobes-test.h
+++ b/arch/arm/kernel/kprobes-test.h
@@ -149,23 +149,31 @@ struct test_arg_end {
 	"1:	"instruction"				\n\t"	\
 	"	nop					\n\t"
 
-#define TEST_BRANCH_F(instruction, xtra_dist)			\
+#define TEST_BRANCH_F(instruction)				\
 	TEST_INSTRUCTION(instruction)				\
-	".if "#xtra_dist"				\n\t"	\
 	"	b	99f				\n\t"	\
-	".space "#xtra_dist"				\n\t"	\
-	".endif						\n\t"	\
+	"2:	nop					\n\t"
+
+#define TEST_BRANCH_B(instruction)				\
+	"	b	50f				\n\t"	\
+	"	b	99f				\n\t"	\
+	"2:	nop					\n\t"	\
+	"	b	99f				\n\t"	\
+	TEST_INSTRUCTION(instruction)
+
+#define TEST_BRANCH_FX(instruction, codex)			\
+	TEST_INSTRUCTION(instruction)				\
+	"	b	99f				\n\t"	\
+	codex"						\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"
 
-#define TEST_BRANCH_B(instruction, xtra_dist)			\
+#define TEST_BRANCH_BX(instruction, codex)			\
 	"	b	50f				\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"	\
 	"	b	99f				\n\t"	\
-	".if "#xtra_dist"				\n\t"	\
-	".space "#xtra_dist"				\n\t"	\
-	".endif						\n\t"	\
+	codex"						\n\t"	\
 	TEST_INSTRUCTION(instruction)
 
 #define TESTCASE_END						\
@@ -301,47 +309,60 @@ struct test_arg_end {
 	TESTCASE_START(code1 #reg1 code2)	\
 	TEST_ARG_PTR(reg1, val1)		\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code1 #reg1 code2, 0)	\
+	TEST_BRANCH_F(code1 #reg1 code2)	\
 	TESTCASE_END
 
-#define TEST_BF_X(code, xtra_dist)		\
+#define TEST_BF(code)				\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code, xtra_dist)		\
+	TEST_BRANCH_F(code)			\
 	TESTCASE_END
 
-#define TEST_BB_X(code, xtra_dist)		\
+#define TEST_BB(code)				\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_B(code, xtra_dist)		\
+	TEST_BRANCH_B(code)			\
 	TESTCASE_END
 
-#define TEST_BF_RX(code1, reg, val, code2, xtra_dist)	\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_BRANCH_F(code1 #reg code2, xtra_dist)	\
+#define TEST_BF_R(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)	\
+	TEST_ARG_REG(reg, val)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_F(code1 #reg code2)		\
 	TESTCASE_END
 
-#define TEST_BB_RX(code1, reg, val, code2, xtra_dist)	\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_BRANCH_B(code1 #reg code2, xtra_dist)	\
+#define TEST_BB_R(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)	\
+	TEST_ARG_REG(reg, val)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_B(code1 #reg code2)		\
 	TESTCASE_END
 
-#define TEST_BF(code)	TEST_BF_X(code, 0)
-#define TEST_BB(code)	TEST_BB_X(code, 0)
-
-#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
-#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
-
 #define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3)	\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
 	TEST_ARG_REG(reg1, val1)				\
 	TEST_ARG_REG(reg2, val2)				\
 	TEST_ARG_END("")					\
-	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0)		\
+	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3)		\
+	TESTCASE_END
+
+#define TEST_BF_X(code, codex)			\
+	TESTCASE_START(code)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_FX(code, codex)		\
+	TESTCASE_END
+
+#define TEST_BB_X(code, codex)			\
+	TESTCASE_START(code)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_BX(code, codex)		\
+	TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, codex)	\
+	TESTCASE_START(code1 #reg code2)		\
+	TEST_ARG_REG(reg, val)				\
+	TEST_ARG_END("")				\
+	TEST_BRANCH_FX(code1 #reg code2, codex)		\
 	TESTCASE_END
 
 #define TEST_X(code, codex)			\
@@ -372,6 +393,25 @@ struct test_arg_end {
 	TESTCASE_END
 
 
+/*
+ * Macros for defining space directives spread over multiple lines.
+ * These are required so the compiler guesses better the length of inline asm
+ * code and will spill the literal pool early enough to avoid generating PC
+ * relative loads with out of range offsets.
+ */
+#define TWICE(x)	x x
+#define SPACE_0x8	TWICE(".space 4\n\t")
+#define SPACE_0x10	TWICE(SPACE_0x8)
+#define SPACE_0x20	TWICE(SPACE_0x10)
+#define SPACE_0x40	TWICE(SPACE_0x20)
+#define SPACE_0x80	TWICE(SPACE_0x40)
+#define SPACE_0x100	TWICE(SPACE_0x80)
+#define SPACE_0x200	TWICE(SPACE_0x100)
+#define SPACE_0x400	TWICE(SPACE_0x200)
+#define SPACE_0x800	TWICE(SPACE_0x400)
+#define SPACE_0x1000	TWICE(SPACE_0x800)
+
+
 /* Various values used in test cases... */
 #define N(val)	(val ^ 0xffffffff)
 #define VAL1	0x12345678
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 24e2347be6b1..8e9c98edc068 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -343,19 +343,25 @@ validate_group(struct perf_event *event)
 {
 	struct perf_event *sibling, *leader = event->group_leader;
 	struct pmu_hw_events fake_pmu;
+	DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
 
-	memset(&fake_pmu, 0, sizeof(fake_pmu));
+	/*
+	 * Initialise the fake PMU. We only need to populate the
+	 * used_mask for the purposes of validation.
+	 */
+	memset(fake_used_mask, 0, sizeof(fake_used_mask));
+	fake_pmu.used_mask = fake_used_mask;
 
 	if (!validate_event(&fake_pmu, leader))
-		return -ENOSPC;
+		return -EINVAL;
 
 	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
 		if (!validate_event(&fake_pmu, sibling))
-			return -ENOSPC;
+			return -EINVAL;
 	}
 
 	if (!validate_event(&fake_pmu, event))
-		return -ENOSPC;
+		return -EINVAL;
 
 	return 0;
 }
@@ -396,6 +402,9 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
 	int i, err, irq, irqs;
 	struct platform_device *pmu_device = armpmu->plat_device;
 
+	if (!pmu_device)
+		return -ENODEV;
+
 	err = reserve_pmu(armpmu->type);
 	if (err) {
 		pr_warning("unable to reserve pmu\n");
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index 2c3407ee8576..2334bf8a650a 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -33,3 +33,4 @@ release_pmu(enum arm_pmu_type type)
 {
 	clear_bit_unlock(type, pmu_lock);
 }
+EXPORT_SYMBOL_GPL(release_pmu);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 75316f0dd02a..3d0c6fb74ae4 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -192,6 +192,9 @@ void cpu_idle(void)
 #endif
 
 			local_irq_disable();
+#ifdef CONFIG_PL310_ERRATA_769419
+			wmb();
+#endif
 			if (hlt_counter) {
 				local_irq_enable();
 				cpu_relax();
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 1040c00405d0..8200deaa14f6 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -43,7 +43,7 @@
 
 struct cputopo_arm cpu_topology[NR_CPUS];
 
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+const struct cpumask *cpu_coregroup_mask(int cpu)
 {
 	return &cpu_topology[cpu].core_sibling;
 }
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 10d868a5a481..d6408d1ee543 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,5 +1,9 @@
+#include <asm/unwind.h>
+
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	bitop, instr
+	.macro	bitop, name, instr
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
@@ -13,9 +17,13 @@
 	cmp	r0, #0
 	bne	1b
 	bx	lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 
-	.macro	testop, instr, store
+	.macro	testop, name, instr, store
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
@@ -34,9 +42,13 @@
 	cmp	r0, #0
 	movne	r0, #1
 2:	bx	lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 #else
-	.macro	bitop, instr
+	.macro	bitop, name, instr
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	and	r2, r0, #31
@@ -49,6 +61,8 @@
 	str	r2, [r1, r0, lsl #2]
 	restore_irqs ip
 	mov	pc, lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 
 /**
@@ -59,7 +73,9 @@
  * Note: we can trivially conditionalise the store instruction
  * to avoid dirtying the data cache.
  */
-	.macro	testop, instr, store
+	.macro	testop, name, instr, store
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	and	r3, r0, #31
@@ -73,5 +89,7 @@
 	moveq	r0, #0
 	restore_irqs ip
 	mov	pc, lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 #endif
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index 68ed5b62e839..f4027862172f 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_change_bit)
-	bitop	eor
-ENDPROC(_change_bit)
+bitop	_change_bit, eor
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index 4c04c3b51eeb..f6b75fb64d30 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_clear_bit)
-	bitop	bic
-ENDPROC(_clear_bit)
+bitop	_clear_bit, bic
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index bbee5c66a23e..618fedae4b37 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
 		.text
 
-ENTRY(_set_bit)
-	bitop	orr
-ENDPROC(_set_bit)
+bitop	_set_bit, orr
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 15a4d431f229..4becdc3a59cb 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_change_bit)
-	testop	eor, str
-ENDPROC(_test_and_change_bit)
+testop	_test_and_change_bit, eor, str
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 521b66b5b95d..918841dcce7a 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_clear_bit)
-	testop	bicne, strne
-ENDPROC(_test_and_clear_bit)
+testop	_test_and_clear_bit, bicne, strne
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 1c98cc2185bb..8d1b2fe9e487 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_set_bit)
-	testop	orreq, streq
-ENDPROC(_test_and_set_bit)
+testop	_test_and_set_bit, orreq, streq
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 064bbae65e5b..18bacec2b094 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 3f6c6a12480d..3a960d2740b6 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -196,9 +196,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
-	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
-	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
 	/* more usart lookup table for DT entries */
 	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index f9bcb251e338..642ccb6d26b2 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index dff4c2de20c7..fc59cbdb0e3c 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index a1d452b22514..7b46b2787022 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h
index 8f4866045b41..ec164a4124c9 100644
--- a/arch/arm/mach-at91/include/mach/system_rev.h
+++ b/arch/arm/mach-at91/include/mach/system_rev.h
@@ -19,7 +19,7 @@
 #define BOARD_HAVE_NAND_16BIT	(1 << 31)
 static inline int board_have_nand_16bit(void)
 {
-	return system_rev & BOARD_HAVE_NAND_16BIT;
+	return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1d7d24995226..6659a90dbcad 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
-	.asp_chan_q	= EVENTQ_1,
+	.asp_chan_q	= EVENTQ_0,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 1918ae711428..46e1f4173b97 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = {
 		/* UBL (a few copies) plus U-Boot */
 		.name		= "bootloader",
 		.offset		= 0,
-		.size		= 28 * NAND_BLOCK_SIZE,
+		.size		= 30 * NAND_BLOCK_SIZE,
 		.mask_flags	= MTD_WRITEABLE, /* force read-only */
 	}, {
 		/* U-Boot environment */
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index e574d7f837a8..635bf7740157 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 	int val;
 	u32 value;
 
-	if (!vpif_vsclkdis_reg || !cpld_client)
+	if (!vpif_vidclkctl_reg || !cpld_client)
 		return -ENXIO;
 
 	val = i2c_smbus_read_byte(cpld_client);
@@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 		return val;
 
 	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(vpif_vsclkdis_reg);
+	value = __raw_readl(vpif_vidclkctl_reg);
 	if (mux_mode) {
 		val &= VPIF_INPUT_TWO_CHANNEL;
 		value |= VIDCH1CLK;
@@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 		val |= VPIF_INPUT_ONE_CHANNEL;
 		value &= ~VIDCH1CLK;
 	}
-	__raw_writel(value, vpif_vsclkdis_reg);
+	__raw_writel(value, vpif_vidclkctl_reg);
 	spin_unlock_irqrestore(&vpif_reg_lock, flags);
 
 	err = i2c_smbus_write_byte(cpld_client, val);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 0b68ed534f8e..af27c130595f 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -161,7 +161,6 @@ static struct clk dsp_clk = {
 	.name = "dsp",
 	.parent = &pll1_sysclk1,
 	.lpsc = DM646X_LPSC_C64X_CPU,
-	.flags = PSC_DSP,
 	.usecount = 1,			/* REVISIT how to disable? */
 };
 
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index fa59c097223d..8bc3fc256171 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -233,7 +233,7 @@
 #define PTCMD		0x120
 #define PTSTAT		0x128
 #define PDSTAT		0x200
-#define PDCTL1		0x304
+#define PDCTL		0x300
 #define MDSTAT		0x800
 #define MDCTL		0xA00
 
@@ -244,7 +244,10 @@
 #define PSC_STATE_ENABLE	3
 
 #define MDSTAT_STATE_MASK	0x3f
+#define PDSTAT_STATE_MASK	0x1f
 #define MDCTL_FORCE		BIT(31)
+#define PDCTL_NEXT		BIT(1)
+#define PDCTL_EPCGOOD		BIT(8)
 
 #ifndef __ASSEMBLER__
 
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1fb6bdff38c1..d7e210f4b55c 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		unsigned int id, bool enable, u32 flags)
 {
-	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+	u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl;
 	void __iomem *psc_base;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 next_state = PSC_STATE_ENABLE;
@@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		mdctl |= MDCTL_FORCE;
 	__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
 
-	pdstat = __raw_readl(psc_base + PDSTAT);
-	if ((pdstat & 0x00000001) == 0) {
-		pdctl1 = __raw_readl(psc_base + PDCTL1);
-		pdctl1 |= 0x1;
-		__raw_writel(pdctl1, psc_base + PDCTL1);
+	pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain);
+	if ((pdstat & PDSTAT_STATE_MASK) == 0) {
+		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+		pdctl |= PDCTL_NEXT;
+		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
 
 		ptcmd = 1 << domain;
 		__raw_writel(ptcmd, psc_base + PTCMD);
@@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 			epcpr = __raw_readl(psc_base + EPCPR);
 		} while ((((epcpr >> domain) & 1) == 0));
 
-		pdctl1 = __raw_readl(psc_base + PDCTL1);
-		pdctl1 |= 0x100;
-		__raw_writel(pdctl1, psc_base + PDCTL1);
+		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+		pdctl |= PDCTL_EPCGOOD;
+		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
 	} else {
 		ptcmd = 1 << domain;
 		__raw_writel(ptcmd, psc_base + PTCMD);
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 35f6502144ae..4ebb382c5979 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/cpuidle.h>
 #include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
 
 #include <asm/proc-fns.h>
 
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index b82dcf08e747..88660d500f5b 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -22,6 +22,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 
 #include <asm/cacheflush.h>
 #include <asm/unified.h>
@@ -72,6 +73,9 @@ static void __init highbank_map_io(void)
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
+#ifdef CONFIG_SMP
+	cpu = cpu_logical_map(cpu);
+#endif
 	writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f7f9c2a34ae..c44aa974e79c 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -10,11 +10,6 @@ config HAVE_IMX_MMDC
 config HAVE_IMX_SRC
 	bool
 
-#
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
 config ARCH_MX1
 	bool
 
@@ -27,12 +22,6 @@ config ARCH_MX25
 config MACH_MX27
 	bool
 
-config ARCH_MX31
-	bool
-
-config ARCH_MX35
-	bool
-
 config SOC_IMX1
 	bool
 	select ARCH_MX1
@@ -72,7 +61,6 @@ config SOC_IMX31
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select ARCH_MXC_AUDMUX_V2
-	select ARCH_MX31
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
@@ -82,7 +70,6 @@ config SOC_IMX35
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
-	select ARCH_MX35
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 613a1b993bff..039a7abb165a 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -1953,14 +1953,17 @@ static struct map_desc imx6q_clock_desc[] = {
 	imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
 };
 
+void __init imx6q_clock_map_io(void)
+{
+	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+}
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
 
-	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
-
 	/* retrieve the freqency of fixed clocks from device tree */
 	for_each_compatible_node(np, NULL, "fixed-clock") {
 		u32 rate;
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 8bf5fa349484..8deb012189b5 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -34,16 +34,18 @@ static void __init imx6q_map_io(void)
 {
 	imx_lluart_map_io();
 	imx_scu_map_io();
+	imx6q_clock_map_io();
 }
 
-static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx6q gets 7 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx6q_irq_match[] __initconst = {
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 9f0e82ec3398..31807d2a8b7b 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -33,29 +33,32 @@
 static void imx3_idle(void)
 {
 	unsigned long reg = 0;
-	__asm__ __volatile__(
-		/* disable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"bic %0, %0, #0x00001000\n"
-		"bic %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		/* invalidate I cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c5, 0\n"
-		/* clear and invalidate D cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c14, 0\n"
-		/* WFI */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c0, 4\n"
-		"nop\n" "nop\n" "nop\n" "nop\n"
-		"nop\n" "nop\n" "nop\n"
-		/* enable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"orr %0, %0, #0x00001000\n"
-		"orr %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		: "=r" (reg));
+
+	if (!need_resched())
+		__asm__ __volatile__(
+			/* disable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"bic %0, %0, #0x00001000\n"
+			"bic %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			/* invalidate I cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c5, 0\n"
+			/* clear and invalidate D cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c14, 0\n"
+			/* WFI */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c0, 4\n"
+			"nop\n" "nop\n" "nop\n" "nop\n"
+			"nop\n" "nop\n" "nop\n"
+			/* enable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"orr %0, %0, #0x00001000\n"
+			"orr %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			: "=r" (reg));
+	local_irq_enable();
 }
 
 static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -108,6 +111,7 @@ void imx3_init_l2x0(void)
 	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
 }
 
+#ifdef CONFIG_SOC_IMX31
 static struct map_desc mx31_io_desc[] __initdata = {
 	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
 	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
@@ -126,33 +130,11 @@ void __init mx31_map_io(void)
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
-	imx_ioremap = imx3_ioremap;
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
+	pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
 }
 
@@ -161,11 +143,6 @@ void __init mx31_init_irq(void)
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
 }
 
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
 static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
 	.per_2_per_addr = 1677,
 };
@@ -199,6 +176,35 @@ void __init imx31_soc_init(void)
 
 	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
 }
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+	pm_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+}
 
 static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
 	.ap_2_ap_addr = 642,
@@ -254,3 +260,4 @@ void __init imx35_soc_init(void)
 
 	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
 }
+#endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 36cacbd0dcc2..a8e33681b732 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 #include <asm/unified.h>
 
 #define SRC_SCR				0x000
@@ -23,10 +24,15 @@
 
 static void __iomem *src_base;
 
+#ifndef CONFIG_SMP
+#define cpu_logical_map(cpu)		0
+#endif
+
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;
 
+	cpu = cpu_logical_map(cpu);
 	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
@@ -35,6 +41,7 @@ void imx_enable_cpu(int cpu, bool enable)
 
 void imx_set_cpu_jump(int cpu, void *jump_addr)
 {
+	cpu = cpu_logical_map(cpu);
 	writel_relaxed(BSYM(virt_to_phys(jump_addr)),
 		       src_base + SRC_GPR1 + cpu * 8);
 }
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 69156568bc41..4665767a4f79 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -182,7 +182,7 @@ static void __init gplugd_init(void)
 
 	/* on-chip devices */
 	pxa168_add_uart(3);
-	pxa168_add_ssp(0);
+	pxa168_add_ssp(1);
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
 
 	pxa168_add_eth(&gplugd_eth_platform_data);
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
index d14eeaf16322..99b4ce1b6562 100644
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -7,7 +7,7 @@
 #define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
 
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(GPIO_REGS_VIRT + (x))
+#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
 
 #define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
 
diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c
index 24030d0da6e3..0fb7a17df398 100644
--- a/arch/arm/mach-msm/devices-iommu.c
+++ b/arch/arm/mach-msm/devices-iommu.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
+#include <linux/module.h>
 #include <mach/irqs.h>
 #include <mach/iommu.h>
 
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 5c5328257dca..5e2e7a843860 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static int mx5_cpu_rev = -1;
 
@@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void)
 	if (!cpu_is_mx51())
 		return 0;
 
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
+			(elf_hwcap & HWCAP_NEON)) {
 		elf_hwcap &= ~HWCAP_NEON;
 		pr_info("Turning off NEON support, detected broken NEON implementation\n");
 	}
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
index ccc61585659b..596edd967dbf 100644
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -44,20 +44,22 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+static int __init imx51_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
 	irq_domain_add_simple(np, 0);
+	return 0;
 }
 
-static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+static int __init imx51_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 4; /* imx51 gets 4 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx51_irq_match[] __initconst = {
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
index ccaa0b81b768..85bfd5ff21b0 100644
--- a/arch/arm/mach-mx5/imx53-dt.c
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -48,20 +48,22 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+static int __init imx53_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
 	irq_domain_add_simple(np, 0);
+	return 0;
 }
 
-static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+static int __init imx53_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx53 gets 7 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx53_irq_match[] __initconst = {
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index 26eacc9d0d90..df4a508f240a 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -23,7 +23,9 @@
 
 static void imx5_idle(void)
 {
-	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	if (!need_resched())
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	local_irq_enable();
 }
 
 /*
@@ -89,7 +91,7 @@ void __init imx51_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	imx_idle = imx5_idle;
+	pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 229ae3494216..da6e4aad177c 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
 	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg | (1 << clk->enable_shift)) {				\
+	if (reg & (1 << clk->enable_shift)) {				\
 		pr_err("%s: clock is gated\n", __func__);		\
 		return -EINVAL;						\
 	}								\
diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h
index 75d86118b76a..30c7990f3c01 100644
--- a/arch/arm/mach-mxs/include/mach/mx28.h
+++ b/arch/arm/mach-mxs/include/mach/mx28.h
@@ -104,8 +104,8 @@
 #define MX28_INT_CAN1			9
 #define MX28_INT_LRADC_TOUCH		10
 #define MX28_INT_HSADC			13
-#define MX28_INT_IRADC_THRESH0		14
-#define MX28_INT_IRADC_THRESH1		15
+#define MX28_INT_LRADC_THRESH0		14
+#define MX28_INT_LRADC_THRESH1		15
 #define MX28_INT_LRADC_CH0		16
 #define MX28_INT_LRADC_CH1		17
 #define MX28_INT_LRADC_CH2		18
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 0d2d2b470998..bde5f6634747 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -30,6 +30,7 @@
  */
 #define cpu_is_mx23()		(					\
 		machine_is_mx23evk() ||					\
+		machine_is_stmp378x() ||				\
 		0)
 #define cpu_is_mx28()		(					\
 		machine_is_mx28evk() ||					\
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 3b1681e4f49a..6b00577b7025 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = {
 MACHINE_START(M28EVK, "DENX M28 EVK")
 	.map_io		= mx28_map_io,
 	.init_irq	= mx28_init_irq,
-	.init_machine	= m28evk_init,
 	.timer		= &m28evk_timer,
+	.init_machine	= m28evk_init,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index 177e53123a02..6834dea38c04 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = {
 MACHINE_START(STMP378X, "STMP378X")
 	.map_io		= mx23_map_io,
 	.init_irq	= mx23_init_irq,
-	.init_machine	= stmp378x_dvb_init,
 	.timer		= &stmp378x_dvb_timer,
+	.init_machine	= stmp378x_dvb_init,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index 0fcff47009cf..9a7b08b2a925 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
 	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
 };
 
-static struct fec_platform_data tx28_fec0_data = {
+static const struct fec_platform_data tx28_fec0_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
-static struct fec_platform_data tx28_fec1_data = {
+static const struct fec_platform_data tx28_fec1_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index e0a028161dde..73f287d6429b 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC
 comment "OMAP CPU Speed"
 	depends on ARCH_OMAP1
 
-config OMAP_CLOCKS_SET_BY_BOOTLOADER
-	bool "OMAP clocks set by bootloader"
-	depends on ARCH_OMAP1
-	help
-	  Enable this option to prevent the kernel from overriding the clock
-	  frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
-	  internal LCD controller and MPU peripherals.
-
 config OMAP_ARM_216MHZ
 	bool "OMAP ARM 216 MHz CPU (1710 only)"
         depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 51bae31cf361..b0f15d234a12 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -302,8 +302,6 @@ static void __init ams_delta_init(void)
 	omap_cfg_reg(J19_1610_CAM_D6);
 	omap_cfg_reg(J18_1610_CAM_D7);
 
-	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
-
 	omap_board_config = ams_delta_config;
 	omap_board_config_size = ARRAY_SIZE(ams_delta_config);
 	omap_serial_init();
@@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void)
 }
 arch_initcall(ams_delta_modem_init);
 
+static void __init ams_delta_map_io(void)
+{
+	omap15xx_map_io();
+	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
+}
+
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index eaf09efb91ca..16b1423b454a 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,7 +17,8 @@
 
 #include <plat/clock.h>
 
-extern int __init omap1_clk_init(void);
+int omap1_clk_init(void);
+void omap1_clk_late_init(void);
 extern int omap1_clk_enable(struct clk *clk);
 extern void omap1_clk_disable(struct clk *clk);
 extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 92400b9eb69f..9ff90a744a21 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
@@ -767,6 +769,15 @@ static struct clk_functions omap1_clk_functions = {
 	.clk_disable_unused	= omap1_clk_disable_unused,
 };
 
+static void __init omap1_show_rates(void)
+{
+	pr_notice("Clocking rate (xtal/DPLL1/MPU): "
+			"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+		ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+		ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+		arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
@@ -835,9 +846,12 @@ int __init omap1_clk_init(void)
 	/* We want to be in syncronous scalable mode */
 	omap_writew(0x1000, ARM_SYSST);
 
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-	/* Use values set by bootloader. Determine PLL rate and recalculate
-	 * dependent clocks as if kernel had changed PLL or divisors.
+
+	/*
+	 * Initially use the values set by bootloader. Determine PLL rate and
+	 * recalculate dependent clocks as if kernel had changed PLL or
+	 * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+	 * after the SRAM is initialized.
 	 */
 	{
 		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@@ -862,25 +876,10 @@ int __init omap1_clk_init(void)
 			}
 		}
 	}
-#else
-	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-		printk(KERN_ERR "System frequencies not set. Check your config.\n");
-		/* Guess sane values (60MHz) */
-		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
-		ck_dpll1.rate = 60000000;
-	}
-#endif
 	propagate_rate(&ck_dpll1);
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
+	omap1_show_rates();
 	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
 		/* Select slicer output as OMAP input clock */
 		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@@ -925,3 +924,27 @@ int __init omap1_clk_init(void)
 
 	return 0;
 }
+
+#define OMAP1_DPLL1_SANE_VALUE	60000000
+
+void __init omap1_clk_late_init(void)
+{
+	unsigned long rate = ck_dpll1.rate;
+
+	if (rate >= OMAP1_DPLL1_SANE_VALUE)
+		return;
+
+	/* System booting at unusable rate, force reprogramming of DPLL1 */
+	ck_dpll1_p->rate = 0;
+
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		pr_err("System frequencies not set, using default. Check your config.\n");
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL);
+		ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+	}
+	propagate_rate(&ck_dpll1);
+	omap1_show_rates();
+	loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
+}
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 48ef9888e820..475cb2f50d87 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -30,6 +30,8 @@
 #include <plat/omap7xx.h>
 #include <plat/mcbsp.h>
 
+#include "clock.h"
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -293,6 +295,7 @@ static int __init omap1_init_devices(void)
 		return -ENODEV;
 
 	omap_sram_init();
+	omap1_clk_late_init();
 
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 503414718905..e1293aa513d3 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -334,6 +334,7 @@ config MACH_OMAP4_PANDA
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3
+	select ARM_AMBA
 	select OC_ETM
 	help
 	  Say Y here to enable debugging hardware of omap3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 69ab1c069134..b009f17dee56 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o
+	 common.o gpio.o dma.o wd_timer.o display.o
 
 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
@@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
 obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
 
-disp-$(CONFIG_OMAP2_DSS)		:= display.o
-obj-y					+= $(disp-m) $(disp-y)
-
 obj-y					+= common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 1fe35c24fba2..942bb4f19f9f 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -24,6 +24,7 @@
 
 #include <linux/sched.h>
 #include <linux/cpuidle.h>
+#include <linux/export.h>
 
 #include <plat/prcm.h>
 #include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index adb2756e242f..dce9905d64bb 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -27,8 +27,35 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
+#include <plat/common.h>
 
 #include "control.h"
+#include "display.h"
+
+#define DISPC_CONTROL		0x0040
+#define DISPC_CONTROL2		0x0238
+#define DISPC_IRQSTATUS		0x0018
+
+#define DSS_SYSCONFIG		0x10
+#define DSS_SYSSTATUS		0x14
+#define DSS_CONTROL		0x40
+#define DSS_SDI_CONTROL		0x44
+#define DSS_PLL_CONTROL		0x48
+
+#define LCD_EN_MASK		(0x1 << 0)
+#define DIGIT_EN_MASK		(0x1 << 1)
+
+#define FRAMEDONE_IRQ_SHIFT	0
+#define EVSYNC_EVEN_IRQ_SHIFT	2
+#define EVSYNC_ODD_IRQ_SHIFT	3
+#define FRAMEDONE2_IRQ_SHIFT	22
+#define FRAMEDONETV_IRQ_SHIFT	24
+
+/*
+ * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC
+ *     reset before deciding that something has gone wrong
+ */
+#define FRAMEDONE_IRQ_TIMEOUT		100
 
 static struct platform_device omap_display_device = {
 	.name          = "omapdss",
@@ -172,3 +199,135 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 
 	return r;
 }
+
+static void dispc_disable_outputs(void)
+{
+	u32 v, irq_mask = 0;
+	bool lcd_en, digit_en, lcd2_en = false;
+	int i;
+	struct omap_dss_dispc_dev_attr *da;
+	struct omap_hwmod *oh;
+
+	oh = omap_hwmod_lookup("dss_dispc");
+	if (!oh) {
+		WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n");
+		return;
+	}
+
+	if (!oh->dev_attr) {
+		pr_err("display: could not disable outputs during reset due to missing dev_attr\n");
+		return;
+	}
+
+	da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr;
+
+	/* store value of LCDENABLE and DIGITENABLE bits */
+	v = omap_hwmod_read(oh, DISPC_CONTROL);
+	lcd_en = v & LCD_EN_MASK;
+	digit_en = v & DIGIT_EN_MASK;
+
+	/* store value of LCDENABLE for LCD2 */
+	if (da->manager_count > 2) {
+		v = omap_hwmod_read(oh, DISPC_CONTROL2);
+		lcd2_en = v & LCD_EN_MASK;
+	}
+
+	if (!(lcd_en | digit_en | lcd2_en))
+		return; /* no managers currently enabled */
+
+	/*
+	 * If any manager was enabled, we need to disable it before
+	 * DSS clocks are disabled or DISPC module is reset
+	 */
+	if (lcd_en)
+		irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT;
+
+	if (digit_en) {
+		if (da->has_framedonetv_irq) {
+			irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT;
+		} else {
+			irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT |
+				1 << EVSYNC_ODD_IRQ_SHIFT;
+		}
+	}
+
+	if (lcd2_en)
+		irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT;
+
+	/*
+	 * clear any previous FRAMEDONE, FRAMEDONETV,
+	 * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts
+	 */
+	omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS);
+
+	/* disable LCD and TV managers */
+	v = omap_hwmod_read(oh, DISPC_CONTROL);
+	v &= ~(LCD_EN_MASK | DIGIT_EN_MASK);
+	omap_hwmod_write(v, oh, DISPC_CONTROL);
+
+	/* disable LCD2 manager */
+	if (da->manager_count > 2) {
+		v = omap_hwmod_read(oh, DISPC_CONTROL2);
+		v &= ~LCD_EN_MASK;
+		omap_hwmod_write(v, oh, DISPC_CONTROL2);
+	}
+
+	i = 0;
+	while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) !=
+	       irq_mask) {
+		i++;
+		if (i > FRAMEDONE_IRQ_TIMEOUT) {
+			pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n");
+			break;
+		}
+		mdelay(1);
+	}
+}
+
+#define MAX_MODULE_SOFTRESET_WAIT	10000
+int omap_dss_reset(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int c = 0;
+	int i, r;
+
+	if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
+		pr_err("dss_core: hwmod data doesn't contain reset data\n");
+		return -EINVAL;
+	}
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk)
+			clk_enable(oc->_clk);
+
+	dispc_disable_outputs();
+
+	/* clear SDI registers */
+	if (cpu_is_omap3430()) {
+		omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL);
+		omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL);
+	}
+
+	/*
+	 * clear DSS_CONTROL register to switch DSS clock sources to
+	 * PRCM clock, if any
+	 */
+	omap_hwmod_write(0x0, oh, DSS_CONTROL);
+
+	omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+				& SYSS_RESETDONE_MASK),
+			MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("dss_core: waiting for reset to finish failed\n");
+	else
+		pr_debug("dss_core: softreset done\n");
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk)
+			clk_disable(oc->_clk);
+
+	r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+	return r;
+}
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
new file mode 100644
index 000000000000..b871b017b352
--- /dev/null
+++ b/arch/arm/mach-omap2/display.h
@@ -0,0 +1,29 @@
+/*
+ * display.h - OMAP2+ integration-specific DSS header
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+
+#include <linux/kernel.h>
+
+struct omap_dss_dispc_dev_attr {
+	u8	manager_count;
+	bool	has_framedonetv_irq;
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/arch/arm/mach-omap2/io.h
+++ /dev/null
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 6b3088db83b7..207a2ff9a8c4 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh)
 		ohii = &oh->mpu_irqs[i++];
 	} while (ohii->irq != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
@@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh)
 		ohdi = &oh->sdma_reqs[i++];
 	} while (ohdi->dma_req != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
@@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
 		mem = &os->addr[i++];
 	} while (mem->pa_start != mem->pa_end);
 
-	return i;
+	return i-1;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 6d7206213525..a5409ce3f323 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -875,6 +875,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "tv_clk", .clk = "dss_54m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_fck" },
 };
@@ -899,7 +903,7 @@ static struct omap_hwmod omap2420_dss_core_hwmod = {
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_slaves),
 	.masters	= omap2420_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2420_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 /* l4_core -> dss_dispc */
@@ -939,6 +943,7 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = {
 	.slaves		= omap2420_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /* l4_core -> dss_rfbi */
@@ -961,6 +966,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
 	&omap2420_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
@@ -972,6 +981,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
 			.module_offs = CORE_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap2420_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -981,7 +992,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
 static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
 	.master		= &omap2420_l4_core_hwmod,
 	.slave		= &omap2420_dss_venc_hwmod,
-	.clk		= "dss_54m_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
@@ -1001,7 +1012,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
 static struct omap_hwmod omap2420_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_fck",
+	.main_clk	= "dss_54m_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a2580d01c3ff..c4f56cb60d7d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -942,6 +942,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "tv_clk", .clk = "dss_54m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_fck" },
 };
@@ -966,7 +970,7 @@ static struct omap_hwmod omap2430_dss_core_hwmod = {
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_slaves),
 	.masters	= omap2430_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2430_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 /* l4_core -> dss_dispc */
@@ -1000,6 +1004,7 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = {
 	.slaves		= omap2430_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /* l4_core -> dss_rfbi */
@@ -1016,6 +1021,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
 	&omap2430_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
@@ -1027,6 +1036,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
 			.module_offs = CORE_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap2430_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -1036,7 +1047,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
 static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
 	.master		= &omap2430_l4_core_hwmod,
 	.slave		= &omap2430_dss_venc_hwmod,
-	.clk		= "dss_54m_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
@@ -1050,7 +1061,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
 static struct omap_hwmod omap2430_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_fck",
+	.main_clk	= "dss_54m_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index c451729d289a..c11273da5dcc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -11,6 +11,7 @@
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
 #include <plat/dma.h>
+#include <plat/common.h>
 
 #include <mach/irqs.h>
 
@@ -43,13 +44,15 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
 struct omap_hwmod_class omap2_dss_hwmod_class = {
 	.name	= "dss",
 	.sysc	= &omap2_dss_sysc,
+	.reset	= omap_dss_reset,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index bc9035ec87fc..7f8915ad5099 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1369,9 +1369,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	{ .role = "tv_clk", .clk = "dss_tv_fck" },
-	{ .role = "video_clk", .clk = "dss_96m_fck" },
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+	{ .role = "tv_clk", .clk = "dss_tv_fck" },
+	/* required only on OMAP3430 */
+	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
 };
 
 static struct omap_hwmod omap3430es1_dss_core_hwmod = {
@@ -1394,11 +1399,12 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = {
 	.slaves_cnt	= ARRAY_SIZE(omap3430es1_dss_slaves),
 	.masters	= omap3xxx_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 static struct omap_hwmod omap3xxx_dss_core_hwmod = {
 	.name		= "dss_core",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.class		= &omap2_dss_hwmod_class,
 	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
 	.sdma_reqs	= omap3xxx_dss_sdma_chs,
@@ -1456,6 +1462,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
 	.slaves		= omap3xxx_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /*
@@ -1486,6 +1493,7 @@ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_dsi1_hwmod,
+	.clk		= "dss_ick",
 	.addr		= omap3xxx_dss_dsi1_addrs,
 	.fw = {
 		.omap2 = {
@@ -1502,6 +1510,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
 	&omap3xxx_l4_core__dss_dsi1,
 };
 
+static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+};
+
 static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 	.name		= "dss_dsi1",
 	.class		= &omap3xxx_dsi_hwmod_class,
@@ -1514,6 +1526,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_dsi1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
 	.slaves		= omap3xxx_dss_dsi1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -1540,6 +1554,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = {
 	&omap3xxx_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
@@ -1551,6 +1569,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap3xxx_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -1560,7 +1580,7 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_venc_hwmod,
-	.clk		= "dss_tv_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
@@ -1578,10 +1598,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = {
 	&omap3xxx_l4_core__dss_venc,
 };
 
+static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
+	/* required only on OMAP3430 */
+	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
+};
+
 static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_alwon_fck",
+	.main_clk	= "dss_tv_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -1589,6 +1614,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_venc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_venc_opt_clks),
 	.slaves		= omap3xxx_dss_venc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_venc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 7695e5d43316..daaf165af696 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,6 +30,7 @@
 #include <plat/mmc.h>
 #include <plat/i2c.h>
 #include <plat/dmtimer.h>
+#include <plat/common.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -1187,6 +1188,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = {
 static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
 	.name	= "dss",
 	.sysc	= &omap44xx_dss_sysc,
+	.reset	= omap_dss_reset,
 };
 
 /* dss */
@@ -1240,12 +1242,12 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = {
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss_sys_clk" },
 	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "dss_clk", .clk = "dss_dss_clk" },
-	{ .role = "video_clk", .clk = "dss_48mhz_clk" },
+	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
 };
 
 static struct omap_hwmod omap44xx_dss_hwmod = {
 	.name		= "dss_core",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.class		= &omap44xx_dss_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.main_clk	= "dss_dss_clk",
@@ -1325,6 +1327,11 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = {
 	{ }
 };
 
+static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
+	.manager_count		= 3,
+	.has_framedonetv_irq	= 1
+};
+
 /* l4_per -> dss_dispc */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
 	.master		= &omap44xx_l4_per_hwmod,
@@ -1340,12 +1347,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
 	&omap44xx_l4_per__dss_dispc,
 };
 
-static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
-};
-
 static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap44xx_dispc_hwmod_class,
@@ -1359,10 +1360,9 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
 		},
 	},
-	.opt_clks	= dss_dispc_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dispc_opt_clks),
 	.slaves		= omap44xx_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dispc_slaves),
+	.dev_attr	= &omap44xx_dss_dispc_dev_attr
 };
 
 /*
@@ -1624,7 +1624,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_hdmi_irqs,
 	.sdma_reqs	= omap44xx_dss_hdmi_sdma_reqs,
-	.main_clk	= "dss_dss_clk",
+	.main_clk	= "dss_48mhz_clk",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
@@ -1785,7 +1785,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap44xx_venc_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
+	.main_clk	= "dss_tv_clk",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index de832ebc93a9..51e5418899fb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -49,3 +49,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
 	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
 };
 
+struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
+	.manager_count		= 2,
+	.has_framedonetv_irq	= 0
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 39a7c37f4587..ad5d8f04c0b8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -16,6 +16,8 @@
 
 #include <plat/omap_hwmod.h>
 
+#include "display.h"
+
 /* Common address space across OMAP2xxx */
 extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
 extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
@@ -111,4 +113,6 @@ extern struct omap_hwmod_class omap2xxx_dma_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mcspi_class;
 
+extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
+
 #endif
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index 6a66aa5e2a5b..d15225ff5c49 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -237,7 +237,7 @@ static int __devexit omap4_l3_remove(struct platform_device *pdev)
 static const struct of_device_id l3_noc_match[] = {
 	{.compatible = "ti,omap4-l3-noc", },
 	{},
-}
+};
 MODULE_DEVICE_TABLE(of, l3_noc_match);
 #else
 #define l3_noc_match NULL
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1e79bdf313e3..00bff46ca48b 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -24,6 +24,7 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include "pm.h"
+#include "twl-common.h"
 
 static struct omap_device_pm_latency *pm_lats;
 
@@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init);
 
 static int __init omap2_common_pm_late_init(void)
 {
-	/* Init the OMAP TWL parameters */
-	omap3_twl_init();
-	omap4_twl_init();
-
 	/* Init the voltage layer */
+	omap_pmic_late_init();
 	omap_voltage_late_init();
 
 	/* Initialize the voltages */
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 6a4f6839a7d9..cf246b39bac7 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -139,7 +139,7 @@ static irqreturn_t sr_interrupt(int irq, void *data)
 		sr_write_reg(sr_info, ERRCONFIG_V1, status);
 	} else if (sr_info->ip_type == SR_TYPE_V2) {
 		/* Read the status bits */
-		sr_read_reg(sr_info, IRQSTATUS);
+		status = sr_read_reg(sr_info, IRQSTATUS);
 
 		/* Clear them by writing back */
 		sr_write_reg(sr_info, IRQSTATUS, status);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 522435772168..10b20c652e5d 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -30,6 +30,7 @@
 #include <plat/usb.h>
 
 #include "twl-common.h"
+#include "pm.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
@@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+void __init omap_pmic_late_init(void)
+{
+	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
+	if (!pmic_i2c_board_info.irq)
+		return;
+
+	omap3_twl_init();
+	omap4_twl_init();
+}
+
 #if defined(CONFIG_ARCH_OMAP3)
 static struct twl4030_usb_data omap3_usb_pdata = {
 	.usb_mode	= T2_USB_MODE_ULPI,
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 5e83a5bd37fb..275dde8cb27a 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -1,6 +1,8 @@
 #ifndef __OMAP_PMIC_COMMON__
 #define __OMAP_PMIC_COMMON__
 
+#include <plat/irqs.h>
+
 #define TWL_COMMON_PDATA_USB		(1 << 0)
 #define TWL_COMMON_PDATA_BCI		(1 << 1)
 #define TWL_COMMON_PDATA_MADC		(1 << 2)
@@ -30,6 +32,7 @@ struct twl4030_platform_data;
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
+void omap_pmic_late_init(void);
 
 static inline void omap2_pmic_init(const char *pmic_type,
 				   struct twl4030_platform_data *pmic_data)
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index cb53160f6c5d..26ebb57719df 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index ef555c041962..a12b689a8702 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -8,6 +8,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <linux/of.h>
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index fc0b8544e174..4b81f59a4cba 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -307,7 +307,7 @@ static inline void balloon3_mmc_init(void) {}
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static void balloon3_udc_command(int cmd)
 {
 	if (cmd == PXA2XX_UDC_CMD_CONNECT)
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 692e1ffc5586..d23b92b80488 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -146,7 +146,7 @@ static void __init colibri_pxa320_init_eth(void)
 static inline void __init colibri_pxa320_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
 	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
 	.gpio_pullup		= -1,
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 9c8208ca0415..ffdd70dad327 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -106,7 +106,7 @@ static void __init gumstix_mmc_init(void)
 }
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA25X
+#ifdef CONFIG_USB_PXA25X
 static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
index f80bbe246afe..d4eac3d6ffb5 100644
--- a/arch/arm/mach-pxa/include/mach/palm27x.h
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -37,8 +37,8 @@ extern void __init palm27x_lcd_init(int power,
 #define palm27x_lcd_init(power, mode)	do {} while (0)
 #endif
 
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 extern void __init palm27x_udc_init(int vbus, int pullup,
 					int vbus_inverted);
 #else
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 325c245c0a0d..fbc10d7b95d1 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -164,8 +164,8 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info palm27x_udc_info = {
 	.gpio_vbus_inverted	= 1,
 };
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ec7caefb37c..2c24c67fd92b 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -338,7 +338,7 @@ static inline void palmtc_mkp_init(void) {}
 /******************************************************************************
  * UDC
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
 static struct gpio_vbus_mach_info palmtc_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index a7539a6ed1ff..ca0c6615028c 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -343,7 +343,7 @@ static inline void vpac270_uhc_init(void) {}
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
 	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
 	.gpio_pullup		= -1,
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 5e6b42089eb4..3341fd118723 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 66668565ee75..f208154b1382 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 7a3bc32df425..51c00f2453c6 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -70,7 +70,7 @@ void __init s3c6400_init_irq(void)
 	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
 }
 
-struct sysdev_class s3c6400_sysclass = {
+static struct sysdev_class s3c6400_sysclass = {
 	.name	= "s3c6400-core",
 };
 
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 83d2afb79e9f..2cf80026c58d 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -20,7 +20,7 @@
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-extern void s3c64xx_fb_gpio_setup_24bpp(void)
+void s3c64xx_fb_gpio_setup_24bpp(void)
 {
 	s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
 	s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot
index 5a616f6e5612..f7951aa04562 100644
--- a/arch/arm/mach-sa1100/Makefile.boot
+++ b/arch/arm/mach-sa1100/Makefile.boot
@@ -1,5 +1,5 @@
-ifeq ($(CONFIG_ARCH_SA1100),y)
-   zreladdr-$(CONFIG_SA1111)		+= 0xc0208000
+ifeq ($(CONFIG_SA1111),y)
+   zreladdr-y	+= 0xc0208000
 else
    zreladdr-y	+= 0xc0008000
 endif
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 8ac9e9f84790..b1e192ba8c24 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -61,7 +61,7 @@ static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
 
-#ifdef CONFIG_ARM_ERRATA_753970
+#ifdef CONFIG_PL310_ERRATA_753970
 	/* write to an unmmapped register */
 	writel_relaxed(0, base + L2X0_DUMMY_REG);
 #else
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e4e7f6cba1ab..1aa664a1999f 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -168,7 +168,7 @@ static int __init consistent_init(void)
 	pte_t *pte;
 	int i = 0;
 	unsigned long base = consistent_base;
-	unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+	unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
 
 	consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
 	if (!consistent_pte) {
@@ -332,6 +332,15 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	struct page *page;
 	void *addr;
 
+	/*
+	 * Following is a work-around (a.k.a. hack) to prevent pages
+	 * with __GFP_COMP being passed to split_page() which cannot
+	 * handle them.  The real problem is that this flag probably
+	 * should be 0 on ARM as it is not supported on this
+	 * platform; see CONFIG_HUGETLBFS.
+	 */
+	gfp &= ~(__GFP_COMP);
+
 	*handle = ~0;
 	size = PAGE_ALIGN(size);
 
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 74be05f3e03a..44b628e4d6ea 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -9,8 +9,7 @@
 #include <linux/io.h>
 #include <linux/personality.h>
 #include <linux/random.h>
-#include <asm/cputype.h>
-#include <asm/system.h>
+#include <asm/cachetype.h>
 
 #define COLOUR_ALIGN(addr,pgoff)		\
 	((((addr)+SHMLBA-1)&~(SHMLBA-1)) +	\
@@ -32,25 +31,15 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
-	unsigned int cache_type;
-	int do_align = 0, aliasing = 0;
+	int do_align = 0;
+	int aliasing = cache_is_vipt_aliasing();
 
 	/*
 	 * We only need to do colour alignment if either the I or D
-	 * caches alias.  This is indicated by bits 9 and 21 of the
-	 * cache type register.
+	 * caches alias.
 	 */
-	cache_type = read_cpuid_cachetype();
-	if (cache_type != read_cpuid_id()) {
-		aliasing = (cache_type | cache_type >> 12) & (1 << 11);
-		if (aliasing)
-			do_align = filp || flags & MAP_SHARED;
-	}
-#else
-#define do_align 0
-#define aliasing 0
-#endif
+	if (aliasing)
+		do_align = filp || (flags & MAP_SHARED);
 
 	/*
 	 * We enforce the MAP_FIXED case.
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 83b745a5e1b7..c75f254abd85 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -85,7 +85,6 @@ enum mxc_cpu_pwr_mode {
 };
 
 extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
-extern void (*imx_idle)(void);
 extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
@@ -133,4 +132,5 @@ extern void imx53_qsb_common_init(void);
 extern void imx53_smd_common_init(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_pm_init(void);
+extern void imx6q_clock_map_io(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 00a78193c681..a4d36d601d55 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -50,20 +50,6 @@
 #define IMX_CHIP_REVISION_3_3		0x33
 #define IMX_CHIP_REVISION_UNKNOWN	0xff
 
-#define IMX_CHIP_REVISION_1_0_STRING		"1.0"
-#define IMX_CHIP_REVISION_1_1_STRING		"1.1"
-#define IMX_CHIP_REVISION_1_2_STRING		"1.2"
-#define IMX_CHIP_REVISION_1_3_STRING		"1.3"
-#define IMX_CHIP_REVISION_2_0_STRING		"2.0"
-#define IMX_CHIP_REVISION_2_1_STRING		"2.1"
-#define IMX_CHIP_REVISION_2_2_STRING		"2.2"
-#define IMX_CHIP_REVISION_2_3_STRING		"2.3"
-#define IMX_CHIP_REVISION_3_0_STRING		"3.0"
-#define IMX_CHIP_REVISION_3_1_STRING		"3.1"
-#define IMX_CHIP_REVISION_3_2_STRING		"3.2"
-#define IMX_CHIP_REVISION_3_3_STRING		"3.3"
-#define IMX_CHIP_REVISION_UNKNOWN_STRING	"unknown"
-
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index cf88b3593fba..b9895d250167 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -17,14 +17,9 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
-extern void (*imx_idle)(void);
-
 static inline void arch_idle(void)
 {
-	if (imx_idle != NULL)
-		(imx_idle)();
-	else
-		cpu_do_idle();
+	cpu_do_idle();
 }
 
 void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 9dad8dcc2ea9..d65fb31a55ca 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -28,8 +29,8 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-void (*imx_idle)(void) = NULL;
 void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
+EXPORT_SYMBOL_GPL(imx_ioremap);
 
 static void __iomem *wdog_base;
 
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 197ca03c3f7d..eb73ab40e955 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -165,8 +165,8 @@ struct dpll_data {
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-	u8			flags;
 #  endif
+	u8			flags;
 };
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index c50df4814f6f..3ff3e36580f2 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 
 #include <plat/i2c.h>
+#include <plat/omap_hwmod.h>
 
 struct sys_timer;
 
@@ -55,6 +56,8 @@ void am35xx_init_early(void);
 void ti816x_init_early(void);
 void omap4430_init_early(void);
 
+extern int omap_dss_reset(struct omap_hwmod *);
+
 void omap_sram_init(void);
 
 /*
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
index a9276667c2fb..c7adad0e8de0 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -12,7 +12,7 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c
index e1cbc728c775..c8bec9c7655d 100644
--- a/arch/arm/plat-s5p/sysmmu.c
+++ b/arch/arm/plat-s5p/sysmmu.c
@@ -11,6 +11,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/export.h>
 
 #include <asm/pgtable.h>
 
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index d48245bb02b3..df8155b9d4d1 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -24,6 +24,8 @@
 #ifndef __PLAT_GPIO_CFG_H
 #define __PLAT_GPIO_CFG_H __FILE__
 
+#include<linux/types.h>
+
 typedef unsigned int __bitwise__ samsung_gpio_pull_t;
 typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 
diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c
index efe1d564473e..312b510d86b7 100644
--- a/arch/arm/plat-samsung/pd.c
+++ b/arch/arm/plat-samsung/pd.c
@@ -11,7 +11,7 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c
index dc1185dcf80d..c559d8438c70 100644
--- a/arch/arm/plat-samsung/pwm.c
+++ b/arch/arm/plat-samsung/pwm.c
@@ -11,7 +11,7 @@
  * the Free Software Foundation; either version 2 of the License.
 */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 5bdeef969847..ccbe16f47227 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -1123,5 +1123,6 @@ blissc			MACH_BLISSC		BLISSC			3491
 thales_adc		MACH_THALES_ADC		THALES_ADC		3492
 ubisys_p9d_evp		MACH_UBISYS_P9D_EVP	UBISYS_P9D_EVP		3493
 atdgp318		MACH_ATDGP318		ATDGP318		3494
+m28evk			MACH_M28EVK		M28EVK			3613
 smdk4212		MACH_SMDK4212		SMDK4212		3638
 smdk4412		MACH_SMDK4412		SMDK4412		3765