Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
 "This adds support for the spear13xx platform, which has first been
  under review a long time ago and finally been completed after generic
  spear work has gone into the clock, dt and pinctrl branches.

  Also a number of updates for the samsung socs are part of this branch."

Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
worse than they are: the exonys5 init code was refactored in commit
fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a
new gpio chip define and did tiny updates to the init code.

So the conflict diff looks like hell, but it's actually a fairly simple
change.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: fix building with CONFIG_OF disabled
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  ...

65 files changed, 2978 insertions, 177 deletions

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 18194acab493..0298b00fe241 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -186,6 +186,8 @@ machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
 machine-$(CONFIG_ARCH_VT8500)		:= vt8500
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_MACH_SPEAR1310)	:= spear13xx
+machine-$(CONFIG_MACH_SPEAR1340)	:= spear13xx
 machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 399d17b231d2..49945cc1bc7d 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -23,4 +23,52 @@
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
 	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 0 2 3 0>,
+			<&gpb3 1 2 3 0>;
+
+		eeprom@50 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x50>;
+		};
+	};
+
+	i2c@12C70000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 2 2 3 0>,
+			<&gpb3 3 2 3 0>;
+
+		eeprom@51 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x51>;
+		};
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index dfc433599436..5ca0cdb76413 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -23,11 +23,11 @@
 	compatible = "samsung,exynos5250";
 	interrupt-parent = <&gic>;
 
-	gic:interrupt-controller@10490000 {
+	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+		reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
 	};
 
 	watchdog {
@@ -42,30 +42,6 @@
 		interrupts = <0 43 0>, <0 44 0>;
 	};
 
-	sdhci@12200000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12200000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12210000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12210000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	sdhci@12220000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12220000 0x100>;
-		interrupts = <0 77 0>;
-	};
-
-	sdhci@12230000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12230000 0x100>;
-		interrupts = <0 78 0>;
-	};
-
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -94,48 +70,64 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
 		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C70000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C70000 0x100>;
 		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C80000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C80000 0x100>;
 		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C90000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C90000 0x100>;
 		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CA0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CA0000 0x100>;
 		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CB0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CB0000 0x100>;
 		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CC0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CC0000 0x100>;
 		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CD0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CD0000 0x100>;
 		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	amba {
@@ -157,13 +149,13 @@
 			interrupts = <0 35 0>;
 		};
 
-		mdma0: pdma@10800000 {
+		mdma0: mdma@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
 		};
 
-		mdma1: pdma@11C10000 {
+		mdma1: mdma@11C10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
@@ -242,6 +234,12 @@
 			#gpio-cells = <4>;
 		};
 
+		gpc4: gpio-controller@114002E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114002E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
 		gpd0: gpio-controller@11400160 {
 			compatible = "samsung,exynos4-gpio";
 			reg = <0x11400160 0x20>;
@@ -388,19 +386,19 @@
 
 		gpv2: gpio-controller@10D10040 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10040 0x20>;
+			reg = <0x10D10060 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv3: gpio-controller@10D10060 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10060 0x20>;
+			reg = <0x10D10080 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv4: gpio-controller@10D10080 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10080 0x20>;
+			reg = <0x10D100C0 0x20>;
 			#gpio-cells = <4>;
 		};
 
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
new file mode 100644
index 000000000000..8314e4171884
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -0,0 +1,292 @@
+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+	model = "ST SPEAr1310 Evaluation Board";
+	compatible = "st,spear1310-evb", "st,spear1310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2s1 {
+					st,pins = "i2s1_grp";
+					st,function = "i2s1";
+				};
+				gpio {
+					st,pins = "arm_gpio_grp";
+					st,function = "arm_gpio";
+				};
+				eth {
+					st,pins = "gmii_grp";
+					st,function = "gmii";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				kbd {
+					st,pins = "keyboard_6x6_grp";
+					st,function = "keyboard";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				smi-pmx {
+					st,pins = "smi_2_chips_grp";
+					st,function = "smi";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				rs485 {
+					st,pins = "rs485_0_1_tdm_0_1_grp";
+					st,function = "rs485_0_1_tdm_0_1";
+				};
+				i2c1_2 {
+					st,pins = "i2c_1_2_grp";
+					st,function = "i2c_1_2";
+				};
+				pci {
+					st,pins = "pcie0_grp","pcie1_grp",
+						"pcie2_grp";
+					st,function = "pci";
+				};
+				smii {
+					st,pins = "smii_0_1_2_grp";
+					st,function = "smii_0_1_2";
+				};
+				nand {
+					st,pins = "nand_8bit_grp",
+						"nand_16bit_grp";
+					st,function = "nand";
+				};
+			};
+		};
+
+		ahci@b1000000 {
+			status = "okay";
+		};
+
+		cf@b2800000 {
+			status = "okay";
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@5cd00000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
new file mode 100644
index 000000000000..9e61da404d57
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -0,0 +1,184 @@
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1310";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 68 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b1800000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1800000 0x10000>;
+			interrupts = <0 69 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b4000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb4000000 0x10000>;
+			interrupts = <0 70 0x4>;
+			status = "disabled";
+		};
+
+		gmac1: eth@5c400000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c400000 0x8000>;
+			interrupts = <0 95 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac2: eth@5c500000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c500000 0x8000>;
+			interrupts = <0 96 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac3: eth@5c600000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c600000 0x8000>;
+			interrupts = <0 97 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac4: eth@5c700000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c700000 0x8000>;
+			interrupts = <0 98 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@5cd00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cd00000 0x1000>;
+				interrupts = <0 87 0x4>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@5ce00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5ce00000 0x1000>;
+				interrupts = <0 88 0x4>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@5cf00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cf00000 0x1000>;
+				interrupts = <0 89 0x4>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@5d000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d000000 0x1000>;
+				interrupts = <0 90 0x4>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@5d100000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d100000 0x1000>;
+				interrupts = <0 91 0x4>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@5d200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d200000 0x1000>;
+				interrupts = <0 92 0x4>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@5d300000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d300000 0x1000>;
+				interrupts = <0 93 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c800000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c800000 0x1000>;
+				interrupts = <0 82 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c900000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c900000 0x1000>;
+				interrupts = <0 83 0x4>;
+				status = "disabled";
+			};
+
+			serial@5ca00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5ca00000 0x1000>;
+				interrupts = <0 84 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cb00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cb00000 0x1000>;
+				interrupts = <0 85 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cc00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cc00000 0x1000>;
+				interrupts = <0 86 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x7000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
new file mode 100644
index 000000000000..0d8472e5ab9f
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -0,0 +1,308 @@
+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+	model = "ST SPEAr1340 Evaluation Board";
+	compatible = "st,spear1340-evb", "st,spear1340";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pads_as_gpio {
+					st,pins = "pads_as_gpio_grp";
+					st,function = "pads_as_gpio";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				kbd {
+					st,pins = "keyboard_row_col_grp",
+						"keyboard_col5_grp";
+					st,function = "keyboard";
+				};
+				uart0 {
+					st,pins = "uart0_grp", "uart0_enh_grp";
+					st,function = "uart0";
+				};
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2c1-pmx {
+					st,pins = "i2c1_grp";
+					st,function = "i2c1";
+				};
+				spdif-in {
+					st,pins = "spdif_in_grp";
+					st,function = "spdif_in";
+				};
+				spdif-out {
+					st,pins = "spdif_out_grp";
+					st,function = "spdif_out";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp", "ssp0_cs1_grp",
+						"ssp0_cs3_grp";
+					st,function = "ssp0";
+				};
+				pwm {
+					st,pins = "pwm2_grp", "pwm3_grp";
+					st,function = "pwm";
+				};
+				smi-pmx {
+					st,pins = "smi_grp";
+					st,function = "smi";
+				};
+				i2s {
+					st,pins = "i2s_in_grp", "i2s_out_grp";
+					st,function = "i2s";
+				};
+				gmac {
+					st,pins = "gmii_grp", "rgmii_grp";
+					st,function = "gmac";
+				};
+				cam3 {
+					st,pins = "cam3_grp";
+					st,function = "cam3";
+				};
+				cec0 {
+					st,pins = "cec0_grp";
+					st,function = "cec0";
+				};
+				cec1 {
+					st,pins = "cec1_grp";
+					st,function = "cec1";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				sata {
+					st,pins = "sata_grp";
+					st,function = "sata";
+				};
+			};
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@b4000000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			serial@b4100000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
new file mode 100644
index 000000000000..a26fc47a55e8
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -0,0 +1,56 @@
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1340";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 72 0x4>;
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@b4000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xb4000000 0x1000>;
+				interrupts = <0 104 0x4>;
+				status = "disabled";
+			};
+
+			serial@b4100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb4100000 0x1000>;
+				interrupts = <0 105 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x2a00>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
new file mode 100644
index 000000000000..1f8e1e1481df
--- /dev/null
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -0,0 +1,262 @@
+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	gic: interrupt-controller@ec801000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0xec801000 0x1000 >,
+		      < 0xec800100 0x0100 >;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 8 0x04
+			      0 9 0x04>;
+	};
+
+	L2: l2-cache {
+		    compatible = "arm,pl310-cache";
+		    reg = <0xed000000 0x1000>;
+		    cache-unified;
+		    cache-level = <2>;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200";
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x50000000 0x50000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xe0000000 0xe0000000 0x10000000>;
+
+		sdhci@b3000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0xb3000000 0x100>;
+			interrupts = <0 28 0x4>;
+			status = "disabled";
+		};
+
+		cf@b2800000 {
+			compatible = "arasan,cf-spear1340";
+			reg = <0xb2800000 0x100>;
+			interrupts = <0 29 0x4>;
+			status = "disabled";
+		};
+
+		dma@ea800000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xea800000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+		};
+
+		dma@eb000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xeb000000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+		};
+
+		fsmc: flash@b0000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xb0000000 0x1000	/* FSMC Register */
+			       0xb0800000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			interrupts = <0 20 0x4
+				      0 21 0x4
+				      0 22 0x4
+				      0 23 0x4>;
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		gmac0: eth@e2000000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe2000000 0x8000>;
+			interrupts = <0 23 0x4
+				      0 24 0x4>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash@ea000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xea000000 0x1000>;
+			interrupts = <0 30 0x4>;
+			status = "disabled";
+		};
+
+		spi0: spi@e0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xe0100000 0x1000>;
+			interrupts = <0 31 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e4800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe4800000 0x1000>;
+			interrupts = <0 64 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e5800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe5800000 0x1000>;
+			interrupts = <0 66 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e4000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe4000000 0x1000>;
+			interrupts = <0 65 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e5000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe5000000 0x1000>;
+			interrupts = <0 67 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x50000000 0x50000000 0x10000000
+				  0xb0000000 0xb0000000 0x10000000
+				  0xe0000000 0xe0000000 0x10000000>;
+
+			gpio0: gpio@e0600000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0600000 0x1000>;
+				interrupts = <0 24 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@e0680000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0680000 0x1000>;
+				interrupts = <0 25 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			kbd@e0300000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xe0300000 0x1000>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@e0280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xe0280000 0x1000>;
+				interrupts = <0 41 0x4>;
+				status = "disabled";
+			};
+
+			rtc@e0580000 {
+				compatible = "st,spear-rtc";
+				reg = <0xe0580000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			serial@e0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xe0000000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			adc@e0080000 {
+				compatible = "st,spear600-adc";
+				reg = <0xe0080000 0x1000>;
+				interrupts = <0 44 0x4>;
+				status = "disabled";
+			};
+
+			timer@e0380000 {
+				compatible = "st,spear-timer";
+				reg = <0xe0380000 0x400>;
+				interrupts = <0 37 0x4>;
+			};
+
+			timer@ec800600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xec800600 0x20>;
+				interrupts = <1 13 0x301>;
+			};
+
+			wdt@ec800620 {
+				compatible = "arm,cortex-a9-twd-wdt";
+				reg = <0xec800620 0x20>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				compatible = "st,thermal-spear1340";
+				reg = <0xe07008c4 0x4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
new file mode 100644
index 000000000000..1fdb82694ca2
--- /dev/null
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -0,0 +1,95 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR13XX=y
+CONFIG_MACH_SPEAR1310=y
+CONFIG_MACH_SPEAR1340=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_PATA_ARASAN_CF=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_MPCORE_WATCHDOG=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_DMATEST=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index e3cfd5fd7dd5..43ebe9094411 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS5250 SoC support
 
@@ -70,7 +71,7 @@ config EXYNOS4_MCT
 	help
 	  Use MCT (Multi Core Timer) as kernel timers
 
-config EXYNOS4_DEV_DMA
+config EXYNOS_DEV_DMA
 	bool
 	help
 	  Compile in amba device definitions for DMA controller
@@ -80,6 +81,11 @@ config EXYNOS4_DEV_AHCI
 	help
 	  Compile in platform device definitions for AHCI
 
+config EXYNOS_DEV_DRM
+	bool
+	help
+	  Compile in platform device definitions for core DRM device
+
 config EXYNOS4_SETUP_FIMD0
 	bool
 	help
@@ -161,7 +167,7 @@ config EXYNOS4_SETUP_USB_PHY
 	help
 	  Common setup code for USB PHY controller
 
-config EXYNOS4_SETUP_SPI
+config EXYNOS_SETUP_SPI
 	bool
 	help
 	  Common setup code for SPI GPIO configurations.
@@ -224,7 +230,7 @@ config MACH_ARMLEX4210
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select EXYNOS4_DEV_AHCI
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_SETUP_SDHCI
 	help
 	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
@@ -362,7 +368,7 @@ config MACH_SMDK4212
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	select EXYNOS_DEV_SYSMMU
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C7
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 272625231c73..440a637c76f1 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -50,10 +50,11 @@ obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
 obj-y					+= dev-uart.o
 obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
-obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
-obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
+obj-$(CONFIG_EXYNOS_DEV_DMA)		+= dma.o
 obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
+obj-$(CONFIG_EXYNOS_DEV_DRM)		+= dev-drm.o
+obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o
 
 obj-$(CONFIG_ARCH_EXYNOS)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
@@ -68,4 +69,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
 obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o
-obj-$(CONFIG_EXYNOS4_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_EXYNOS_SETUP_SPI)		+= setup-spi.o
diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
index b9862e22bf10..31bd181b0514 100644
--- a/arch/arm/mach-exynos/Makefile.boot
+++ b/arch/arm/mach-exynos/Makefile.boot
@@ -1,2 +1,5 @@
    zreladdr-y	+= 0x40008000
 params_phys-y	:= 0x40000100
+
+dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
+dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 98823120570e..da397d21bbcf 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -92,6 +92,16 @@ static struct clk init_clocks_off[] = {
 		.devname	= SYSMMU_CLOCK_DEVNAME(isp, 9),
 		.enable		= exynos4212_clk_ip_isp1_ctrl,
 		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "flite",
+		.devname	= "exynos-fimc-lite.0",
+		.enable		= exynos4212_clk_ip_isp0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "flite",
+		.devname	= "exynos-fimc-lite.1",
+		.enable		= exynos4212_clk_ip_isp0_ctrl,
+		.ctrlbit	= (1 << 3),
 	}
 };
 
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 9f87a07b0bf8..5aa460b01fdf 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -165,11 +165,29 @@ static struct clksrc_clk exynos5_clk_sclk_apll = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
+	.clk	= {
+		.name		= "mout_bpll_fout",
+	},
+	.sources = &clk_src_bpll_fout,
+	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_bpll_list[] = {
+	[0] = &clk_fin_bpll,
+	[1] = &exynos5_clk_mout_bpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_bpll = {
+	.sources	= exynos5_clk_src_bpll_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_bpll_list),
+};
+
 static struct clksrc_clk exynos5_clk_mout_bpll = {
 	.clk	= {
 		.name		= "mout_bpll",
 	},
-	.sources = &clk_src_bpll,
+	.sources = &exynos5_clk_src_bpll,
 	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
 };
 
@@ -207,11 +225,29 @@ static struct clksrc_clk exynos5_clk_mout_epll = {
 	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
+	.clk	= {
+		.name		= "mout_mpll_fout",
+	},
+	.sources = &clk_src_mpll_fout,
+	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &exynos5_clk_mout_mpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_mpll = {
+	.sources	= exynos5_clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_mpll_list),
+};
+
 struct clksrc_clk exynos5_clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 	},
-	.sources = &clk_src_mpll,
+	.sources = &exynos5_clk_src_mpll,
 	.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
 };
 
@@ -474,6 +510,11 @@ static struct clk exynos5_init_clocks_off[] = {
 		.enable		= exynos5_clk_ip_peris_ctrl,
 		.ctrlbit	= (1 << 20),
 	}, {
+		.name		= "watchdog",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peris_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
 		.name		= "hsmmc",
 		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
@@ -1031,10 +1072,12 @@ static struct clksrc_clk *exynos5_sysclks[] = {
 	&exynos5_clk_mout_apll,
 	&exynos5_clk_sclk_apll,
 	&exynos5_clk_mout_bpll,
+	&exynos5_clk_mout_bpll_fout,
 	&exynos5_clk_mout_bpll_user,
 	&exynos5_clk_mout_cpll,
 	&exynos5_clk_mout_epll,
 	&exynos5_clk_mout_mpll,
+	&exynos5_clk_mout_mpll_fout,
 	&exynos5_clk_mout_mpll_user,
 	&exynos5_clk_vpllsrc,
 	&exynos5_clk_sclk_vpll,
@@ -1098,7 +1141,9 @@ static struct clk *exynos5_clks[] __initdata = {
 	&exynos5_clk_sclk_hdmi27m,
 	&exynos5_clk_sclk_hdmiphy,
 	&clk_fout_bpll,
+	&clk_fout_bpll_div2,
 	&clk_fout_cpll,
+	&clk_fout_mpll_div2,
 	&exynos5_clk_armclk,
 };
 
@@ -1263,8 +1308,10 @@ void __init_or_cpufreq exynos5_setup_clocks(void)
 
 	clk_fout_apll.ops = &exynos5_fout_apll_ops;
 	clk_fout_bpll.rate = bpll;
+	clk_fout_bpll_div2.rate = bpll >> 1;
 	clk_fout_cpll.rate = cpll;
 	clk_fout_mpll.rate = mpll;
+	clk_fout_mpll_div2.rate = mpll >> 1;
 	clk_fout_epll.rate = epll;
 	clk_fout_vpll.rate = vpll;
 
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 5ccd6e80a607..49134711f4c6 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -19,6 +19,9 @@
 #include <linux/serial_core.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/export.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
@@ -265,12 +268,12 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
-		.length		= SZ_64K,
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
-		.length		= SZ_64K,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
 };
@@ -399,6 +402,7 @@ struct combiner_chip_data {
 	void __iomem *base;
 };
 
+static struct irq_domain *combiner_irq_domain;
 static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
 
 static inline void __iomem *combiner_base(struct irq_data *data)
@@ -411,14 +415,14 @@ static inline void __iomem *combiner_base(struct irq_data *data)
 
 static void combiner_mask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (data->irq % 32);
+	u32 mask = 1 << (data->hwirq % 32);
 
 	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
 }
 
 static void combiner_unmask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (data->irq % 32);
+	u32 mask = 1 << (data->hwirq % 32);
 
 	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
 }
@@ -474,49 +478,131 @@ static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int i
 	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
 }
 
-static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
-			  unsigned int irq_start)
+static void __init combiner_init_one(unsigned int combiner_nr,
+				     void __iomem *base)
 {
-	unsigned int i;
-	unsigned int max_nr;
-
-	if (soc_is_exynos5250())
-		max_nr = EXYNOS5_MAX_COMBINER_NR;
-	else
-		max_nr = EXYNOS4_MAX_COMBINER_NR;
-
-	if (combiner_nr >= max_nr)
-		BUG();
-
 	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_offset = irq_find_mapping(
+		combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
 	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
 
 	/* Disable all interrupts */
-
 	__raw_writel(combiner_data[combiner_nr].irq_mask,
 		     base + COMBINER_ENABLE_CLEAR);
+}
+
+#ifdef CONFIG_OF
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	if (d->of_node != controller)
+		return -EINVAL;
+
+	if (intsize < 2)
+		return -EINVAL;
+
+	*out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+	*out_type = 0;
+
+	return 0;
+}
+#else
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	return -EINVAL;
+}
+#endif
+
+static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
+	irq_set_chip_data(irq, &combiner_data[hw >> 3]);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 
-	/* Setup the Linux IRQ subsystem */
+	return 0;
+}
+
+static struct irq_domain_ops combiner_irq_domain_ops = {
+	.xlate	= combiner_irq_domain_xlate,
+	.map	= combiner_irq_domain_map,
+};
 
-	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
-				+ MAX_IRQ_IN_COMBINER; i++) {
-		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
-		irq_set_chip_data(i, &combiner_data[combiner_nr]);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+void __init combiner_init(void __iomem *combiner_base, struct device_node *np)
+{
+	int i, irq, irq_base;
+	unsigned int max_nr, nr_irq;
+
+	if (np) {
+		if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+			pr_warning("%s: number of combiners not specified, "
+				"setting default as %d.\n",
+				__func__, EXYNOS4_MAX_COMBINER_NR);
+			max_nr = EXYNOS4_MAX_COMBINER_NR;
+		}
+	} else {
+		max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
+						EXYNOS4_MAX_COMBINER_NR;
+	}
+	nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+
+	irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
+	if (IS_ERR_VALUE(irq_base)) {
+		irq_base = COMBINER_IRQ(0, 0);
+		pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+	}
+
+	combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
+				&combiner_irq_domain_ops, &combiner_data);
+	if (WARN_ON(!combiner_irq_domain)) {
+		pr_warning("%s: irq domain init failed\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < max_nr; i++) {
+		combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
+		irq = IRQ_SPI(i);
+#ifdef CONFIG_OF
+		if (np)
+			irq = irq_of_parse_and_map(np, i);
+#endif
+		combiner_cascade_irq(i, irq);
 	}
 }
 
 #ifdef CONFIG_OF
+int __init combiner_of_init(struct device_node *np, struct device_node *parent)
+{
+	void __iomem *combiner_base;
+
+	combiner_base = of_iomap(np, 0);
+	if (!combiner_base) {
+		pr_err("%s: failed to map combiner registers\n", __func__);
+		return -ENXIO;
+	}
+
+	combiner_init(combiner_base, np);
+
+	return 0;
+}
+
 static const struct of_device_id exynos4_dt_irq_match[] = {
 	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "samsung,exynos4210-combiner",
+			.data = combiner_of_init, },
 	{},
 };
 #endif
 
 void __init exynos4_init_irq(void)
 {
-	int irq;
 	unsigned int gic_bank_offset;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
@@ -528,12 +614,8 @@ void __init exynos4_init_irq(void)
 		of_irq_init(exynos4_dt_irq_match);
 #endif
 
-	for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
-
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
+	if (!of_have_populated_dt())
+		combiner_init(S5P_VA_COMBINER_BASE, NULL);
 
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
@@ -545,18 +627,9 @@ void __init exynos4_init_irq(void)
 
 void __init exynos5_init_irq(void)
 {
-	int irq;
-
 #ifdef CONFIG_OF
 	of_irq_init(exynos4_dt_irq_match);
 #endif
-
-	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
-
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
 	 * Theses parameters should be NULL and 0 because EXYNOS4
@@ -565,30 +638,18 @@ void __init exynos5_init_irq(void)
 	s5p_init_irq(NULL, 0);
 }
 
-struct bus_type exynos4_subsys = {
-	.name		= "exynos4-core",
-	.dev_name	= "exynos4-core",
-};
-
-struct bus_type exynos5_subsys = {
-	.name		= "exynos5-core",
-	.dev_name	= "exynos5-core",
+struct bus_type exynos_subsys = {
+	.name		= "exynos-core",
+	.dev_name	= "exynos-core",
 };
 
 static struct device exynos4_dev = {
-	.bus	= &exynos4_subsys,
-};
-
-static struct device exynos5_dev = {
-	.bus	= &exynos5_subsys,
+	.bus	= &exynos_subsys,
 };
 
 static int __init exynos_core_init(void)
 {
-	if (soc_is_exynos5250())
-		return subsys_system_register(&exynos5_subsys, NULL);
-	else
-		return subsys_system_register(&exynos4_subsys, NULL);
+	return subsys_system_register(&exynos_subsys, NULL);
 }
 core_initcall(exynos_core_init);
 
@@ -675,10 +736,7 @@ static int __init exynos_init(void)
 {
 	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
 
-	if (soc_is_exynos5250())
-		return device_register(&exynos5_dev);
-	else
-		return device_register(&exynos4_dev);
+	return device_register(&exynos4_dev);
 }
 
 /* uart registration process */
diff --git a/arch/arm/mach-exynos/dev-drm.c b/arch/arm/mach-exynos/dev-drm.c
new file mode 100644
index 000000000000..17c9c6ecc2e0
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-drm.c
@@ -0,0 +1,29 @@
+/*
+ * linux/arch/arm/mach-exynos/dev-drm.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - core DRM device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device exynos_device_drm = {
+	.name	= "exynos-drm",
+	.dev	= {
+		.dma_mask		= &exynos_drm_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 69aaa4503205..f60b66dbcf84 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -103,10 +103,45 @@ static u8 exynos4212_pdma0_peri[] = {
 	DMACH_MIPI_HSI5,
 };
 
-struct dma_pl330_platdata exynos4_pdma0_pdata;
+static u8 exynos5250_pdma0_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM2_RX,
+	DMACH_PCM2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_MIPI_HSI0,
+	DMACH_MIPI_HSI2,
+	DMACH_MIPI_HSI4,
+	DMACH_MIPI_HSI6,
+};
+
+static struct dma_pl330_platdata exynos_pdma0_pdata;
 
-static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
-	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
+static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330,
+	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata);
 
 static u8 exynos4210_pdma1_peri[] = {
 	DMACH_PCM0_RX,
@@ -169,10 +204,45 @@ static u8 exynos4212_pdma1_peri[] = {
 	DMACH_MIPI_HSI7,
 };
 
-static struct dma_pl330_platdata exynos4_pdma1_pdata;
+static u8 exynos5250_pdma1_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_DISP1,
+	DMACH_MIPI_HSI1,
+	DMACH_MIPI_HSI3,
+	DMACH_MIPI_HSI5,
+	DMACH_MIPI_HSI7,
+};
 
-static AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330,
-	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
+static struct dma_pl330_platdata exynos_pdma1_pdata;
+
+static AMBA_AHB_DEVICE(exynos_pdma1,  "dma-pl330.1", 0x00041330,
+	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata);
 
 static u8 mdma_peri[] = {
 	DMACH_MTOM_0,
@@ -185,46 +255,63 @@ static u8 mdma_peri[] = {
 	DMACH_MTOM_7,
 };
 
-static struct dma_pl330_platdata exynos4_mdma1_pdata = {
+static struct dma_pl330_platdata exynos_mdma1_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(mdma_peri),
 	.peri_id = mdma_peri,
 };
 
-static AMBA_AHB_DEVICE(exynos4_mdma1,  "dma-pl330.2", 0x00041330,
-	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
+static AMBA_AHB_DEVICE(exynos_mdma1,  "dma-pl330.2", 0x00041330,
+	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata);
 
-static int __init exynos4_dma_init(void)
+static int __init exynos_dma_init(void)
 {
 	if (of_have_populated_dt())
 		return 0;
 
 	if (soc_is_exynos4210()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+		exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+	} else if (soc_is_exynos5250()) {
+		exynos_pdma0_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos5250_pdma0_peri);
+		exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos5250_pdma1_peri);
+		exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri;
+
+		exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0;
+		exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0;
+		exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1;
+		exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1;
+		exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1;
+		exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1;
 	}
 
-	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma0_device, &iomem_resource);
+	dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask);
+	amba_device_register(&exynos_pdma0_device, &iomem_resource);
 
-	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma1_device, &iomem_resource);
+	dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask);
+	amba_device_register(&exynos_pdma1_device, &iomem_resource);
 
-	dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_mdma1_device, &iomem_resource);
+	dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask);
+	amba_device_register(&exynos_mdma1_device, &iomem_resource);
 
 	return 0;
 }
-arch_initcall(exynos4_dma_init);
+arch_initcall(exynos_dma_init);
diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h
index d7498afe036a..eb24f1eb8e3b 100644
--- a/arch/arm/mach-exynos/include/mach/gpio.h
+++ b/arch/arm/mach-exynos/include/mach/gpio.h
@@ -153,10 +153,11 @@ enum exynos4_gpio_number {
 #define EXYNOS5_GPIO_B2_NR	(4)
 #define EXYNOS5_GPIO_B3_NR	(4)
 #define EXYNOS5_GPIO_C0_NR	(7)
-#define EXYNOS5_GPIO_C1_NR	(7)
+#define EXYNOS5_GPIO_C1_NR	(4)
 #define EXYNOS5_GPIO_C2_NR	(7)
 #define EXYNOS5_GPIO_C3_NR	(7)
-#define EXYNOS5_GPIO_D0_NR	(8)
+#define EXYNOS5_GPIO_C4_NR	(7)
+#define EXYNOS5_GPIO_D0_NR	(4)
 #define EXYNOS5_GPIO_D1_NR	(8)
 #define EXYNOS5_GPIO_Y0_NR	(6)
 #define EXYNOS5_GPIO_Y1_NR	(4)
@@ -199,7 +200,8 @@ enum exynos5_gpio_number {
 	EXYNOS5_GPIO_C1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
 	EXYNOS5_GPIO_C2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
 	EXYNOS5_GPIO_C3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
-	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+	EXYNOS5_GPIO_C4_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4),
 	EXYNOS5_GPIO_D1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
 	EXYNOS5_GPIO_Y0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
 	EXYNOS5_GPIO_Y1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
@@ -242,6 +244,7 @@ enum exynos5_gpio_number {
 #define EXYNOS5_GPC1(_nr)	(EXYNOS5_GPIO_C1_START + (_nr))
 #define EXYNOS5_GPC2(_nr)	(EXYNOS5_GPIO_C2_START + (_nr))
 #define EXYNOS5_GPC3(_nr)	(EXYNOS5_GPIO_C3_START + (_nr))
+#define EXYNOS5_GPC4(_nr)	(EXYNOS5_GPIO_C4_START + (_nr))
 #define EXYNOS5_GPD0(_nr)	(EXYNOS5_GPIO_D0_START + (_nr))
 #define EXYNOS5_GPD1(_nr)	(EXYNOS5_GPIO_D1_START + (_nr))
 #define EXYNOS5_GPY0(_nr)	(EXYNOS5_GPIO_Y0_START + (_nr))
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index ddde8f3a24d4..7a4b4789eb72 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -287,6 +287,7 @@
 #define EXYNOS5_IRQ_MIPICSI1		IRQ_SPI(80)
 #define EXYNOS5_IRQ_EFNFCON_DMA_ABORT	IRQ_SPI(81)
 #define EXYNOS5_IRQ_MIPIDSI0		IRQ_SPI(82)
+#define EXYNOS5_IRQ_WDT_IOP		IRQ_SPI(83)
 #define EXYNOS5_IRQ_ROTATOR		IRQ_SPI(84)
 #define EXYNOS5_IRQ_GSC0		IRQ_SPI(85)
 #define EXYNOS5_IRQ_GSC1		IRQ_SPI(86)
@@ -295,8 +296,8 @@
 #define EXYNOS5_IRQ_JPEG		IRQ_SPI(89)
 #define EXYNOS5_IRQ_EFNFCON_DMA		IRQ_SPI(90)
 #define EXYNOS5_IRQ_2D			IRQ_SPI(91)
-#define EXYNOS5_IRQ_SFMC0		IRQ_SPI(92)
-#define EXYNOS5_IRQ_SFMC1		IRQ_SPI(93)
+#define EXYNOS5_IRQ_EFNFCON_0		IRQ_SPI(92)
+#define EXYNOS5_IRQ_EFNFCON_1		IRQ_SPI(93)
 #define EXYNOS5_IRQ_MIXER		IRQ_SPI(94)
 #define EXYNOS5_IRQ_HDMI		IRQ_SPI(95)
 #define EXYNOS5_IRQ_MFC			IRQ_SPI(96)
@@ -310,7 +311,7 @@
 #define EXYNOS5_IRQ_PCM2		IRQ_SPI(104)
 #define EXYNOS5_IRQ_SPDIF		IRQ_SPI(105)
 #define EXYNOS5_IRQ_ADC0		IRQ_SPI(106)
-
+#define EXYNOS5_IRQ_ADC1		IRQ_SPI(107)
 #define EXYNOS5_IRQ_SATA_PHY		IRQ_SPI(108)
 #define EXYNOS5_IRQ_SATA_PMEMREQ	IRQ_SPI(109)
 #define EXYNOS5_IRQ_CAM_C		IRQ_SPI(110)
@@ -319,8 +320,9 @@
 #define EXYNOS5_IRQ_DP1_INTP1		IRQ_SPI(113)
 #define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
 #define EXYNOS5_IRQ_SATA		IRQ_SPI(115)
-#define EXYNOS5_IRQ_NFCON		IRQ_SPI(116)
 
+#define EXYNOS5_IRQ_MCT_L0		IRQ_SPI(120)
+#define EXYNOS5_IRQ_MCT_L1		IRQ_SPI(121)
 #define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
 #define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
 #define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
@@ -328,7 +330,6 @@
 #define EXYNOS5_IRQ_RP_TIMER		IRQ_SPI(127)
 
 #define EXYNOS5_IRQ_PMU			COMBINER_IRQ(1, 2)
-#define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(1, 6)
 
 #define EXYNOS5_IRQ_SYSMMU_GSC0_0	COMBINER_IRQ(2, 0)
 #define EXYNOS5_IRQ_SYSMMU_GSC0_1	COMBINER_IRQ(2, 1)
@@ -339,6 +340,8 @@
 #define EXYNOS5_IRQ_SYSMMU_GSC3_0	COMBINER_IRQ(2, 6)
 #define EXYNOS5_IRQ_SYSMMU_GSC3_1	COMBINER_IRQ(2, 7)
 
+#define EXYNOS5_IRQ_SYSMMU_LITE2_0	COMBINER_IRQ(3, 0)
+#define EXYNOS5_IRQ_SYSMMU_LITE2_1	COMBINER_IRQ(3, 1)
 #define EXYNOS5_IRQ_SYSMMU_FIMD1_0	COMBINER_IRQ(3, 2)
 #define EXYNOS5_IRQ_SYSMMU_FIMD1_1	COMBINER_IRQ(3, 3)
 #define EXYNOS5_IRQ_SYSMMU_LITE0_0	COMBINER_IRQ(3, 4)
@@ -362,8 +365,8 @@
 
 #define EXYNOS5_IRQ_SYSMMU_ARM_0	COMBINER_IRQ(6, 0)
 #define EXYNOS5_IRQ_SYSMMU_ARM_1	COMBINER_IRQ(6, 1)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_0	COMBINER_IRQ(6, 2)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_1	COMBINER_IRQ(6, 3)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_0	COMBINER_IRQ(6, 2)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_1	COMBINER_IRQ(6, 3)
 #define EXYNOS5_IRQ_SYSMMU_RTIC_0	COMBINER_IRQ(6, 4)
 #define EXYNOS5_IRQ_SYSMMU_RTIC_1	COMBINER_IRQ(6, 5)
 #define EXYNOS5_IRQ_SYSMMU_SSS_0	COMBINER_IRQ(6, 6)
@@ -375,11 +378,9 @@
 #define EXYNOS5_IRQ_SYSMMU_MDMA1_1	COMBINER_IRQ(7, 3)
 #define EXYNOS5_IRQ_SYSMMU_TV_0		COMBINER_IRQ(7, 4)
 #define EXYNOS5_IRQ_SYSMMU_TV_1		COMBINER_IRQ(7, 5)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_0	COMBINER_IRQ(7, 6)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_1	COMBINER_IRQ(7, 7)
 
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_0	COMBINER_IRQ(8, 5)
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_1	COMBINER_IRQ(8, 6)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_0	COMBINER_IRQ(8, 5)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_1	COMBINER_IRQ(8, 6)
 
 #define EXYNOS5_IRQ_SYSMMU_DIS1_0	COMBINER_IRQ(9, 4)
 #define EXYNOS5_IRQ_SYSMMU_DIS1_1	COMBINER_IRQ(9, 5)
@@ -395,17 +396,24 @@
 #define EXYNOS5_IRQ_SYSMMU_DRC_0	COMBINER_IRQ(11, 6)
 #define EXYNOS5_IRQ_SYSMMU_DRC_1	COMBINER_IRQ(11, 7)
 
+#define EXYNOS5_IRQ_MDMA1_ABORT		COMBINER_IRQ(13, 1)
+
+#define EXYNOS5_IRQ_MDMA0_ABORT		COMBINER_IRQ(15, 3)
+
 #define EXYNOS5_IRQ_FIMD1_FIFO		COMBINER_IRQ(18, 4)
 #define EXYNOS5_IRQ_FIMD1_VSYNC		COMBINER_IRQ(18, 5)
 #define EXYNOS5_IRQ_FIMD1_SYSTEM	COMBINER_IRQ(18, 6)
 
+#define EXYNOS5_IRQ_ARMIOP_GIC		COMBINER_IRQ(19, 0)
+#define EXYNOS5_IRQ_ARMISP_GIC		COMBINER_IRQ(19, 1)
+#define EXYNOS5_IRQ_IOP_GIC		COMBINER_IRQ(19, 3)
+#define EXYNOS5_IRQ_ISP_GIC		COMBINER_IRQ(19, 4)
+
+#define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(22, 4)
+
 #define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_L0		COMBINER_IRQ(23, 1)
-#define EXYNOS5_IRQ_MCT_L1		COMBINER_IRQ(23, 2)
 #define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
 #define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)
-#define EXYNOS5_IRQ_MCT_G2		COMBINER_IRQ(23, 5)
-#define EXYNOS5_IRQ_MCT_G3		COMBINER_IRQ(23, 6)
 
 #define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
 #define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)
@@ -436,7 +444,7 @@
 
 #define EXYNOS5_MAX_COMBINER_NR		32
 
-#define EXYNOS5_IRQ_GPIO1_NR_GROUPS	13
+#define EXYNOS5_IRQ_GPIO1_NR_GROUPS	14
 #define EXYNOS5_IRQ_GPIO2_NR_GROUPS	9
 #define EXYNOS5_IRQ_GPIO3_NR_GROUPS	5
 #define EXYNOS5_IRQ_GPIO4_NR_GROUPS	1
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 2196af2d8218..ca4aa89aa46b 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -34,6 +34,9 @@
 
 #define EXYNOS4_PA_JPEG			0x11840000
 
+/* x = 0...1 */
+#define EXYNOS4_PA_FIMC_LITE(x)		(0x12390000 + ((x) * 0x10000))
+
 #define EXYNOS4_PA_G2D			0x12800000
 
 #define EXYNOS4_PA_I2S0			0x03830000
@@ -78,8 +81,8 @@
 
 #define EXYNOS4_PA_GIC_CPU		0x10480000
 #define EXYNOS4_PA_GIC_DIST		0x10490000
-#define EXYNOS5_PA_GIC_CPU		0x10480000
-#define EXYNOS5_PA_GIC_DIST		0x10490000
+#define EXYNOS5_PA_GIC_CPU		0x10482000
+#define EXYNOS5_PA_GIC_DIST		0x10481000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
 #define EXYNOS4_PA_TWD			0x10500600
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index dba83e91f0fd..b78b5f3ad9c0 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -322,6 +322,8 @@
 #define EXYNOS5_CLKSRC_CDREX			EXYNOS_CLKREG(0x20200)
 #define EXYNOS5_CLKDIV_CDREX			EXYNOS_CLKREG(0x20500)
 
+#define EXYNOS5_PLL_DIV2_SEL			EXYNOS_CLKREG(0x20A24)
+
 #define EXYNOS5_EPLL_LOCK			EXYNOS_CLKREG(0x10030)
 
 #define EXYNOS5_EPLLCON0_LOCKED_SHIFT		(29)
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index d457d052a420..4dbb8629b200 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -180,7 +180,7 @@
 
 #define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
 
-/* Only for EXYNOS4212 */
+/* Only for EXYNOS4x12 */
 #define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
 #define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
 #define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
@@ -221,4 +221,12 @@
 #define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
 #define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
 
+/* Only for EXYNOS4412 */
+#define S5P_ARM_CORE2_LOWPWR			S5P_PMUREG(0x1020)
+#define S5P_DIS_IRQ_CORE2			S5P_PMUREG(0x1024)
+#define S5P_DIS_IRQ_CENTRAL2			S5P_PMUREG(0x1028)
+#define S5P_ARM_CORE3_LOWPWR			S5P_PMUREG(0x1030)
+#define S5P_DIS_IRQ_CORE3			S5P_PMUREG(0x1034)
+#define S5P_DIS_IRQ_CENTRAL3			S5P_PMUREG(0x1038)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h
index 576efdf6d091..c71a5fba6a84 100644
--- a/arch/arm/mach-exynos/include/mach/spi-clocks.h
+++ b/arch/arm/mach-exynos/include/mach/spi-clocks.h
@@ -11,6 +11,6 @@
 #define __ASM_ARCH_SPI_CLKS_H __FILE__
 
 /* Must source from SCLK_SPI */
-#define EXYNOS4_SPI_SRCCLK_SCLK		0
+#define EXYNOS_SPI_SRCCLK_SCLK		0
 
 #endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 4711c8920e37..cf5d2228e998 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -43,6 +43,10 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos4210-uart.2", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
 				"exynos4210-uart.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
+				"s3c2440-i2c.0", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
+				"s3c2440-i2c.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 897d9a9cf226..b601fb8a408b 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -388,6 +388,7 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt;
 	unsigned int cpu = smp_processor_id();
+	int mct_lx_irq;
 
 	mevt = this_cpu_ptr(&percpu_mct_tick);
 	mevt->evt = evt;
@@ -414,14 +415,18 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 
 	if (mct_int_type == MCT_INT_SPI) {
 		if (cpu == 0) {
+			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
+						EXYNOS5_IRQ_MCT_L0;
 			mct_tick0_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L0;
-			setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
+			evt->irq = mct_lx_irq;
+			setup_irq(mct_lx_irq, &mct_tick0_event_irq);
 		} else {
+			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
+						EXYNOS5_IRQ_MCT_L1;
 			mct_tick1_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L1;
-			setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
-			irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
+			evt->irq = mct_lx_irq;
+			setup_irq(mct_lx_irq, &mct_tick1_event_irq);
+			irq_set_affinity(mct_lx_irq, cpumask_of(1));
 		}
 	} else {
 		enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
@@ -473,7 +478,7 @@ static void __init exynos4_timer_resources(void)
 
 static void __init exynos4_timer_init(void)
 {
-	if (soc_is_exynos4210())
+	if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
 		mct_int_type = MCT_INT_SPI;
 	else
 		mct_int_type = MCT_INT_PPI;
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 428cfeb57724..563dea9a6dbb 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -275,7 +275,7 @@ static void exynos4_restore_pll(void)
 
 static struct subsys_interface exynos4_pm_interface = {
 	.name		= "exynos4_pm",
-	.subsys		= &exynos4_subsys,
+	.subsys		= &exynos_subsys,
 	.add_dev	= exynos4_pm_add,
 };
 
@@ -313,7 +313,7 @@ static int exynos4_pm_suspend(void)
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 
-	if (soc_is_exynos4212()) {
+	if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
 		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
 			 S5P_USE_STANDBYWFE_ISP_ARM);
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index bba48f5c3e8f..77c6815eebee 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -94,7 +94,7 @@ static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
-static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+static struct exynos4_pmu_conf exynos4x12_pmu_config[] = {
 	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
 	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
 	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
@@ -202,6 +202,16 @@ static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
+static struct exynos4_pmu_conf exynos4412_pmu_config[] = {
+	{ S5P_ARM_CORE2_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE2,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL2,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE3_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE3,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL3,			{ 0x0, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
+};
+
 void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
 {
 	unsigned int i;
@@ -209,6 +219,12 @@ void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
 	for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
 		__raw_writel(exynos4_pmu_config[i].val[mode],
 				exynos4_pmu_config[i].reg);
+
+	if (soc_is_exynos4412()) {
+		for (i = 0; exynos4412_pmu_config[i].reg != PMU_TABLE_END ; i++)
+			__raw_writel(exynos4412_pmu_config[i].val[mode],
+				exynos4412_pmu_config[i].reg);
+	}
 }
 
 static int __init exynos4_pmu_init(void)
@@ -218,9 +234,9 @@ static int __init exynos4_pmu_init(void)
 	if (soc_is_exynos4210()) {
 		exynos4_pmu_config = exynos4210_pmu_config;
 		pr_info("EXYNOS4210 PMU Initialize\n");
-	} else if (soc_is_exynos4212()) {
-		exynos4_pmu_config = exynos4212_pmu_config;
-		pr_info("EXYNOS4212 PMU Initialize\n");
+	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+		exynos4_pmu_config = exynos4x12_pmu_config;
+		pr_info("EXYNOS4x12 PMU Initialize\n");
 	} else {
 		pr_info("EXYNOS4: PMU not supported\n");
 	}
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index b34287ab5afd..e24961109b70 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -518,6 +518,11 @@ config S3C2443_DMA
 	help
 	  Internal config node for S3C2443 DMA support
 
+config S3C2443_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
 endif	# CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 270a0b6f4f22..0ab6ab15da4c 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -97,5 +97,6 @@ obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 # device setup
 
 obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
 obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index dbc9ab4aaca2..8702ecfaab30 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -144,6 +144,7 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
 };
 
 void __init s3c2416_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index efb3ac359566..a4c5a520d994 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -179,6 +179,11 @@ static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
 };
 
+static struct clk_lookup s3c2443_clk_lookup[] = {
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
+};
+
 void __init s3c2443_init_clocks(int xtal)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@@ -210,6 +215,7 @@ void __init s3c2443_init_clocks(int xtal)
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
 
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index 460431589f39..aeeb2be283fa 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -424,11 +424,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
-		.name		= "hsspi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
@@ -562,6 +557,14 @@ static struct clk hsmmc1_clk = {
 	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
 };
 
+static struct clk hsspi_clk = {
+	.name		= "spi",
+	.devname	= "s3c64xx-spi.0",
+	.parent		= &clk_p,
+	.enable		= s3c2443_clkcon_enable_p,
+	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
+};
+
 /* EPLLCON compatible enough to get on/off information */
 
 void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
@@ -612,6 +615,7 @@ static struct clk *clks[] __initdata = {
 	&clk_usb_bus,
 	&clk_armdiv,
 	&hsmmc1_clk,
+	&hsspi_clk,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -629,6 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index e227c472a40a..2d94228d2866 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -55,12 +55,20 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
 	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
+	[DMACH_SPI0_RX] = {
+		.name		= "spi0-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI0RX),
+	},
+	[DMACH_SPI0_TX] = {
+		.name		= "spi0-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
 	},
-	[DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
-		.name		= "spi1",
+	[DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI1RX),
+	},
+	[DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
 	},
 	[DMACH_UART0] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index acbdfecd4186..454831b66037 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -47,6 +47,10 @@ enum dma_ch {
 	DMACH_UART2_SRC2,
 	DMACH_UART3,		/* s3c2443 has extra uart */
 	DMACH_UART3_SRC2,
+	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
+	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
 	DMACH_MAX,		/* the end entry */
 };
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 78ae807f1281..8ba381f2dbe1 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -98,6 +98,8 @@
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
+#define S3C2443_PA_SPI0		(0x52000000)
+#define S3C2443_PA_SPI1		S3C2410_PA_SPI
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
@@ -162,4 +164,7 @@
 #define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 
+#define S3C_PA_SPI0		S3C2443_PA_SPI0
+#define S3C_PA_SPI1		S3C2443_PA_SPI1
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 000000000000..5712c85f39b1
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+	.high_speed	= 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+	/* enable hsspi bit in misccr */
+	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-spear13xx/Kconfig b/arch/arm/mach-spear13xx/Kconfig
new file mode 100644
index 000000000000..eaadc66d96b3
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Kconfig
@@ -0,0 +1,20 @@
+#
+# SPEAr13XX Machine configuration file
+#
+
+if ARCH_SPEAR13XX
+
+menu "SPEAr13xx Implementations"
+config MACH_SPEAR1310
+	bool "SPEAr1310 Machine support with Device Tree"
+	select PINCTRL_SPEAR1310
+	help
+	  Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+	bool "SPEAr1340 Machine support with Device Tree"
+	select PINCTRL_SPEAR1340
+	help
+	  Supports ST SPEAr1340 machine configured via the device-tree
+endmenu
+endif #ARCH_SPEAR13XX
diff --git a/arch/arm/mach-spear13xx/Makefile b/arch/arm/mach-spear13xx/Makefile
new file mode 100644
index 000000000000..3435ea78c15d
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for SPEAr13XX machine series
+#
+
+obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340.o
diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot
new file mode 100644
index 000000000000..403efd7e6d27
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Makefile.boot
@@ -0,0 +1,6 @@
+zreladdr-y	+= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR1310)	+= spear1310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR1340)	+= spear1340-evb.dtb
diff --git a/arch/arm/mach-spear13xx/headsmp.S b/arch/arm/mach-spear13xx/headsmp.S
new file mode 100644
index 000000000000..ed85473a047f
--- /dev/null
+++ b/arch/arm/mach-spear13xx/headsmp.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-spear13XX/headsmp.S
+ *
+ * Picked from realview
+ * Copyright (c) 2012 ST Microelectronics Limited
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * spear13xx specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(spear13xx_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/* re-enable coherency */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #(1 << 6) | (1 << 0)
+	mcr	p15, 0, r0, c1, c0, 1
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+	.align
+1:	.long	.
+	.long	pen_release
+ENDPROC(spear13xx_secondary_startup)
diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear13xx/hotplug.c
new file mode 100644
index 000000000000..5c6867b46d09
--- /dev/null
+++ b/arch/arm/mach-spear13xx/hotplug.c
@@ -0,0 +1,119 @@
+/*
+ * linux/arch/arm/mach-spear13xx/hotplug.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * based upon linux/arch/arm/mach-realview/hotplug.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	dsb\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	: "=&r" (v)
+	: "r" (0), "Ir" (CR_C)
+	: "cc", "memory");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile("mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	: "=&r" (v)
+	: "Ir" (CR_C)
+	: "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	for (;;) {
+		wfi();
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __cpuinit platform_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..ea1564609bd4
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
new file mode 100644
index 000000000000..383ab04dc6c9
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/dma.h
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/dma.h
+ *
+ * DMA information for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* request id of all the peripherals */
+enum dma_master_info {
+	/* Accessible from only one master */
+	DMA_MASTER_MCIF = 0,
+	DMA_MASTER_FSMC = 1,
+	/* Accessible from both 0 & 1 */
+	DMA_MASTER_MEMORY = 0,
+	DMA_MASTER_ADC = 0,
+	DMA_MASTER_UART0 = 0,
+	DMA_MASTER_SSP0 = 0,
+	DMA_MASTER_I2C0 = 0,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	/* Accessible from only one master */
+	SPEAR1310_DMA_MASTER_JPEG = 1,
+
+	/* Accessible from both 0 & 1 */
+	SPEAR1310_DMA_MASTER_I2S = 0,
+	SPEAR1310_DMA_MASTER_UART1 = 0,
+	SPEAR1310_DMA_MASTER_UART2 = 0,
+	SPEAR1310_DMA_MASTER_UART3 = 0,
+	SPEAR1310_DMA_MASTER_UART4 = 0,
+	SPEAR1310_DMA_MASTER_UART5 = 0,
+	SPEAR1310_DMA_MASTER_I2C1 = 0,
+	SPEAR1310_DMA_MASTER_I2C2 = 0,
+	SPEAR1310_DMA_MASTER_I2C3 = 0,
+	SPEAR1310_DMA_MASTER_I2C4 = 0,
+	SPEAR1310_DMA_MASTER_I2C5 = 0,
+	SPEAR1310_DMA_MASTER_I2C6 = 0,
+	SPEAR1310_DMA_MASTER_I2C7 = 0,
+	SPEAR1310_DMA_MASTER_SSP1 = 0,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	/* Accessible from only one master */
+	SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
+	SPEAR1340_DMA_MASTER_I2S_REC = 1,
+	SPEAR1340_DMA_MASTER_I2C1 = 1,
+	SPEAR1340_DMA_MASTER_UART1 = 1,
+
+	/* following are accessible from both master 0 & 1 */
+	SPEAR1340_DMA_MASTER_SPDIF = 0,
+	SPEAR1340_DMA_MASTER_CAM = 1,
+	SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
+	SPEAR1340_DMA_MASTER_MALI = 0,
+#endif
+};
+
+enum request_id {
+	DMA_REQ_ADC = 0,
+	DMA_REQ_SSP0_TX = 4,
+	DMA_REQ_SSP0_RX = 5,
+	DMA_REQ_UART0_TX = 6,
+	DMA_REQ_UART0_RX = 7,
+	DMA_REQ_I2C0_TX = 8,
+	DMA_REQ_I2C0_RX = 9,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	SPEAR1310_DMA_REQ_FROM_JPEG = 2,
+	SPEAR1310_DMA_REQ_TO_JPEG = 3,
+	SPEAR1310_DMA_REQ_I2S_TX = 10,
+	SPEAR1310_DMA_REQ_I2S_RX = 11,
+
+	SPEAR1310_DMA_REQ_I2C1_RX = 0,
+	SPEAR1310_DMA_REQ_I2C1_TX = 1,
+	SPEAR1310_DMA_REQ_I2C2_RX = 2,
+	SPEAR1310_DMA_REQ_I2C2_TX = 3,
+	SPEAR1310_DMA_REQ_I2C3_RX = 4,
+	SPEAR1310_DMA_REQ_I2C3_TX = 5,
+	SPEAR1310_DMA_REQ_I2C4_RX = 6,
+	SPEAR1310_DMA_REQ_I2C4_TX = 7,
+	SPEAR1310_DMA_REQ_I2C5_RX = 8,
+	SPEAR1310_DMA_REQ_I2C5_TX = 9,
+	SPEAR1310_DMA_REQ_I2C6_RX = 10,
+	SPEAR1310_DMA_REQ_I2C6_TX = 11,
+	SPEAR1310_DMA_REQ_UART1_RX = 12,
+	SPEAR1310_DMA_REQ_UART1_TX = 13,
+	SPEAR1310_DMA_REQ_UART2_RX = 14,
+	SPEAR1310_DMA_REQ_UART2_TX = 15,
+	SPEAR1310_DMA_REQ_UART5_RX = 16,
+	SPEAR1310_DMA_REQ_UART5_TX = 17,
+	SPEAR1310_DMA_REQ_SSP1_RX = 18,
+	SPEAR1310_DMA_REQ_SSP1_TX = 19,
+	SPEAR1310_DMA_REQ_I2C7_RX = 20,
+	SPEAR1310_DMA_REQ_I2C7_TX = 21,
+	SPEAR1310_DMA_REQ_UART3_RX = 28,
+	SPEAR1310_DMA_REQ_UART3_TX = 29,
+	SPEAR1310_DMA_REQ_UART4_RX = 30,
+	SPEAR1310_DMA_REQ_UART4_TX = 31,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	SPEAR1340_DMA_REQ_SPDIF_TX = 2,
+	SPEAR1340_DMA_REQ_SPDIF_RX = 3,
+	SPEAR1340_DMA_REQ_I2S_TX = 10,
+	SPEAR1340_DMA_REQ_I2S_RX = 11,
+	SPEAR1340_DMA_REQ_UART1_TX = 12,
+	SPEAR1340_DMA_REQ_UART1_RX = 13,
+	SPEAR1340_DMA_REQ_I2C1_TX = 14,
+	SPEAR1340_DMA_REQ_I2C1_RX = 15,
+	SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
+	SPEAR1340_DMA_REQ_CAM0_ODD = 1,
+	SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
+	SPEAR1340_DMA_REQ_CAM1_ODD = 3,
+	SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
+	SPEAR1340_DMA_REQ_CAM2_ODD = 5,
+	SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
+	SPEAR1340_DMA_REQ_CAM3_ODD = 7,
+#endif
+};
+
+#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
new file mode 100644
index 000000000000..6d8c45b9f298
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/generic.h
+ *
+ * spear13xx machine family generic header file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <asm/mach/time.h>
+
+/* Add spear13xx structure declarations here */
+extern struct sys_timer spear13xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct dw_dma_platform_data dmac_plat_data;
+extern struct dw_dma_slave cf_dma_priv;
+extern struct dw_dma_slave nand_read_dma_priv;
+extern struct dw_dma_slave nand_write_dma_priv;
+
+/* Add spear13xx family function declarations here */
+void __init spear_setup_of_timer(void);
+void __init spear13xx_map_io(void);
+void __init spear13xx_dt_init_irq(void);
+void __init spear13xx_l2x0_init(void);
+bool dw_dma_filter(struct dma_chan *chan, void *slave);
+void spear_restart(char, const char *);
+void spear13xx_secondary_startup(void);
+
+#ifdef CONFIG_MACH_SPEAR1310
+void __init spear1310_clk_init(void);
+#else
+static inline void spear1310_clk_init(void) {}
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+void __init spear1340_clk_init(void);
+#else
+static inline void spear1340_clk_init(void) {}
+#endif
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
new file mode 100644
index 000000000000..cd6f4f86a56b
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/gpio.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/hardware.h b/arch/arm/mach-spear13xx/include/mach/hardware.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/hardware.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
new file mode 100644
index 000000000000..f542a24aa5f2
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_GIC_END			160
+#define NR_IRQS				IRQ_GIC_END
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
new file mode 100644
index 000000000000..30c57ef72686
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/spear.h
+ *
+ * spear13xx Machine family specific definition
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR13XX_H
+#define __MACH_SPEAR13XX_H
+
+#include <asm/memory.h>
+
+#define PERIP_GRP2_BASE				UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE			UL(0xFE000000)
+#define MCIF_SDHCI_BASE				UL(0xB3000000)
+#define SYSRAM0_BASE				UL(0xB3800000)
+#define VA_SYSRAM0_BASE				UL(0xFE800000)
+#define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE				UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE			UL(0xFD000000)
+#define UART_BASE				UL(0xE0000000)
+#define VA_UART_BASE				UL(0xFD000000)
+#define SSP_BASE				UL(0xE0100000)
+#define MISC_BASE				UL(0xE0700000)
+#define VA_MISC_BASE				IOMEM(UL(0xFD700000))
+
+#define A9SM_AND_MPMC_BASE			UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE			UL(0xFC000000)
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE				UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE			UL(0xFC800000)
+#define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
+
+#define L2CC_BASE				UL(0xED000000)
+#define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
+
+/* others */
+#define DMAC0_BASE				UL(0xEA800000)
+#define DMAC1_BASE				UL(0xEB000000)
+#define MCIF_CF_BASE				UL(0xB2800000)
+
+/* Devices present in SPEAr1310 */
+#ifdef CONFIG_MACH_SPEAR1310
+#define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
+#define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
+#define SPEAR1310_RAS_BASE			UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
+#endif /* CONFIG_MACH_SPEAR1310 */
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE			UART_BASE
+#define VA_SPEAR_DBG_UART_BASE			VA_UART_BASE
+
+#endif /* __MACH_SPEAR13XX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h
new file mode 100644
index 000000000000..31af3e8d976e
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..c7840896ae6e
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c
new file mode 100644
index 000000000000..f5d07f2663d7
--- /dev/null
+++ b/arch/arm/mach-spear13xx/platsmp.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-spear13xx/platsmp.c
+ *
+ * based upon linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
+#include <asm/smp_scu.h>
+#include <mach/spear.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
+extern void spear13xx_secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_secondary_init(0);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+	outer_flush_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+	scu_enable(scu_base);
+
+	/*
+	 * Write the address of secondary startup into the system-wide location
+	 * (presently it is in SRAM). The BootMonitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this address.
+	 */
+	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
+}
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
new file mode 100644
index 000000000000..fefd15b2f380
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-spear13xx/spear1310.c
+ *
+ * SPEAr1310 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1310: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1310_SSP1_BASE			UL(0x5D400000)
+#define SPEAR1310_SATA0_BASE			UL(0xB1000000)
+#define SPEAR1310_SATA1_BASE			UL(0xB1800000)
+#define SPEAR1310_SATA2_BASE			UL(0xB4000000)
+
+/* ssp device registration */
+static struct pl022_ssp_controller ssp1_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 3,
+};
+
+/* Add SPEAr1310 auxdata to pass platform data */
+static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
+	{}
+};
+
+static void __init spear1310_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1310_auxdata_lookup, NULL);
+}
+
+static const char * const spear1310_dt_board_compat[] = {
+	"st,spear1310",
+	"st,spear1310-evb",
+	NULL,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD8000000		0xFA000000
+ */
+struct map_desc spear1310_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR1310_RAS_GRP1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init spear1310_map_io(void)
+{
+	iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
+	spear13xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+	.map_io		=	spear1310_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
new file mode 100644
index 000000000000..ee38cbc56869
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-spear13xx/spear1340.c
+ *
+ * SPEAr1340 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1340: " fmt
+
+#include <linux/ahci_platform.h>
+#include <linux/amba/serial.h>
+#include <linux/delay.h>
+#include <linux/dw_dmac.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1340_SATA_BASE			UL(0xB1000000)
+#define SPEAR1340_UART1_BASE			UL(0xB4100000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG			(VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG			(VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR			(VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST			(VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST			(VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST			(VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG			(VA_MISC_BASE + 0x424)
+	/* PCIE CFG MASks */
+	#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT	(1 << 11)
+	#define SPEAR1340_PCIE_CFG_POWERUP_RESET	(1 << 10)
+	#define SPEAR1340_PCIE_CFG_CORE_CLK_EN		(1 << 9)
+	#define SPEAR1340_PCIE_CFG_AUX_CLK_EN		(1 << 8)
+	#define SPEAR1340_SATA_CFG_TX_CLK_EN		(1 << 4)
+	#define SPEAR1340_SATA_CFG_RX_CLK_EN		(1 << 3)
+	#define SPEAR1340_SATA_CFG_POWERUP_RESET	(1 << 2)
+	#define SPEAR1340_SATA_CFG_PM_CLK_EN		(1 << 1)
+	#define SPEAR1340_PCIE_SATA_SEL_PCIE		(0)
+	#define SPEAR1340_PCIE_SATA_SEL_SATA		(1)
+	#define SPEAR1340_SATA_PCIE_CFG_MASK		0xF1F
+	#define SPEAR1340_PCIE_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_PCIE | \
+			SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+			SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+			SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+			SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+	#define SPEAR1340_SATA_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_SATA | \
+			SPEAR1340_SATA_CFG_PM_CLK_EN | \
+			SPEAR1340_SATA_CFG_POWERUP_RESET | \
+			SPEAR1340_SATA_CFG_RX_CLK_EN | \
+			SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG		(VA_MISC_BASE + 0x428)
+	#define SPEAR1340_MIPHY_OSC_BYPASS_EXT		(1 << 31)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV2		(1 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV4		(2 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV8		(3 << 27)
+	#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x)	(x << 0)
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+			(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+static struct dw_dma_slave uart1_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = SPEAR1340_DMA_MASTER_UART1,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
+		.cfg_lo = 0,
+		.src_master = SPEAR1340_DMA_MASTER_UART1,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+static struct amba_pl011_data uart1_data = {
+	.dma_filter = dw_dma_filter,
+	.dma_tx_param = &uart1_dma_param[0],
+	.dma_rx_param = &uart1_dma_param[1],
+};
+
+/* SATA device registration */
+static int sata_miphy_init(struct device *dev, void __iomem *addr)
+{
+	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
+	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
+			SPEAR1340_PCIE_MIPHY_CFG);
+	/* Switch on sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+	/* Disable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+
+	return 0;
+}
+
+void sata_miphy_exit(struct device *dev)
+{
+	writel(0, SPEAR1340_PCIE_SATA_CFG);
+	writel(0, SPEAR1340_PCIE_MIPHY_CFG);
+
+	/* Enable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+	/* Switch off sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+}
+
+int sata_suspend(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_FREEZE)
+		return 0;
+
+	sata_miphy_exit(dev);
+
+	return 0;
+}
+
+int sata_resume(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_THAW)
+		return 0;
+
+	return sata_miphy_init(dev, NULL);
+}
+
+static struct ahci_platform_data sata_pdata = {
+	.init = sata_miphy_init,
+	.exit = sata_miphy_exit,
+	.suspend = sata_suspend,
+	.resume = sata_resume,
+};
+
+/* Add SPEAr1340 auxdata to pass platform data */
+static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
+			&sata_pdata),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
+	{}
+};
+
+static void __init spear1340_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1340_auxdata_lookup, NULL);
+}
+
+static const char * const spear1340_dt_board_compat[] = {
+	"st,spear1340",
+	"st,spear1340-evb",
+	NULL,
+};
+
+DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+	.map_io		=	spear13xx_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1340_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1340_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
new file mode 100644
index 000000000000..50b349ae863d
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-spear13xx/spear13xx.c
+ *
+ * SPEAr13XX machines common source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr13xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/clk.h>
+#include <linux/dw_dmac.h>
+#include <linux/err.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/smp_twd.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* common dw_dma filter routine to be used by peripherals */
+bool dw_dma_filter(struct dma_chan *chan, void *slave)
+{
+	struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
+
+	if (chan->device->dev == dws->dma_dev) {
+		chan->private = slave;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/* ssp device registration */
+static struct dw_dma_slave ssp_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = DMA_MASTER_SSP0,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_SSP0,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = dw_dma_filter,
+	.dma_rx_param = &ssp_dma_param[1],
+	.dma_tx_param = &ssp_dma_param[0],
+	.num_chipselect = 3,
+};
+
+/* CF device registration */
+struct dw_dma_slave cf_dma_priv = {
+	.cfg_hi = 0,
+	.cfg_lo = 0,
+	.src_master = 0,
+	.dst_master = 0,
+};
+
+/* dmac device registeration */
+struct dw_dma_platform_data dmac_plat_data = {
+	.nr_channels = 8,
+	.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
+	.chan_priority = CHAN_PRIORITY_DESCENDING,
+};
+
+void __init spear13xx_l2x0_init(void)
+{
+	/*
+	 * 512KB (64KB/way), 8-way associativity, parity supported
+	 *
+	 * FIXME: 9th bit, of Auxillary Controller register must be set
+	 * for some spear13xx devices for stable L2 operation.
+	 *
+	 * Enable Early BRESP, L2 prefetch for Instruction and Data,
+	 * write alloc and 'Full line of zero' options
+	 *
+	 */
+
+	writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
+
+	/*
+	 * Program following latencies in order to make
+	 * SPEAr1340 work at 600 MHz
+	 */
+	writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
+	writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
+	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
+}
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xB3000000		0xFE000000
+ * 0xE0000000		0xFD000000
+ * 0xEC000000		0xFC000000
+ * 0xED000000		0xFB000000
+ */
+struct map_desc spear13xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_PERIP_GRP2_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_PERIP_GRP1_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_A9SM_AND_MPMC_BASE,
+		.pfn		= __phys_to_pfn(A9SM_AND_MPMC_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_L2CC_BASE,
+		.pfn		= __phys_to_pfn(L2CC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear13xx_map_io(void)
+{
+	iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc));
+}
+
+static void __init spear13xx_clk_init(void)
+{
+	if (of_machine_is_compatible("st,spear1310"))
+		spear1310_clk_init();
+	else if (of_machine_is_compatible("st,spear1340"))
+		spear1340_clk_init();
+	else
+		pr_err("%s: Unknown machine\n", __func__);
+}
+
+static void __init spear13xx_timer_init(void)
+{
+	char pclk_name[] = "osc_24m_clk";
+	struct clk *gpt_clk, *pclk;
+
+	spear13xx_clk_init();
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
+
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n", __func__,
+				pclk_name);
+		BUG();
+	}
+
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
+
+	spear_setup_of_timer();
+	twd_local_timer_of_register();
+}
+
+struct sys_timer spear13xx_timer = {
+	.init = spear13xx_timer_init,
+};
+
+static const struct of_device_id gic_of_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
+	{ /* Sentinel */ }
+};
+
+void __init spear13xx_dt_init_irq(void)
+{
+	of_irq_init(gic_of_match);
+}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index f8c571031da8..a2fae4ea0936 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -419,7 +419,7 @@ config S3C_DMA
 config SAMSUNG_DMADEV
 	bool
 	select DMADEVICES
-	select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+	select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
 					CPU_S5P6450 || CPU_S5P6440)
 	select ARM_AMBA
 	help
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 787ceaca0be8..0721293fad63 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -202,7 +202,7 @@ extern struct bus_type s3c2443_subsys;
 extern struct bus_type s3c6410_subsys;
 extern struct bus_type s5p64x0_subsys;
 extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos4_subsys;
+extern struct bus_type exynos_subsys;
 
 extern void (*s5pc1xx_idle)(void);
 
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 4067d1dd7f1c..61ca2f356c52 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -134,6 +134,8 @@ extern struct platform_device exynos4_device_pcm2;
 extern struct platform_device exynos4_device_pd[];
 extern struct platform_device exynos4_device_spdif;
 
+extern struct platform_device exynos_device_drm;
+
 extern struct platform_device samsung_asoc_dma;
 extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 0670f37aaaed..d384a8016b47 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -90,6 +90,7 @@ enum dma_ch {
 	DMACH_MIPI_HSI5,
 	DMACH_MIPI_HSI6,
 	DMACH_MIPI_HSI7,
+	DMACH_DISP1,
 	DMACH_MTOM_0,
 	DMACH_MTOM_1,
 	DMACH_MTOM_2,
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
index 1de4b32f98e9..8364b4bea8b8 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -32,8 +32,10 @@ extern struct clk clk_48m;
 extern struct clk s5p_clk_27m;
 extern struct clk clk_fout_apll;
 extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_bpll_div2;
 extern struct clk clk_fout_cpll;
 extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_mpll_div2;
 extern struct clk clk_fout_epll;
 extern struct clk clk_fout_dpll;
 extern struct clk clk_fout_vpll;
@@ -42,8 +44,10 @@ extern struct clk clk_vpll;
 
 extern struct clksrc_sources clk_src_apll;
 extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_bpll_fout;
 extern struct clksrc_sources clk_src_cpll;
 extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_mpll_fout;
 extern struct clksrc_sources clk_src_epll;
 extern struct clksrc_sources clk_src_dpll;
 
diff --git a/arch/arm/plat-samsung/s5p-clock.c b/arch/arm/plat-samsung/s5p-clock.c
index 41d3dfd5dddb..031a61899bef 100644
--- a/arch/arm/plat-samsung/s5p-clock.c
+++ b/arch/arm/plat-samsung/s5p-clock.c
@@ -67,6 +67,11 @@ struct clk clk_fout_bpll = {
 	.id		= -1,
 };
 
+struct clk clk_fout_bpll_div2 = {
+	.name		= "fout_bpll_div2",
+	.id		= -1,
+};
+
 /* CPLL clock output */
 
 struct clk clk_fout_cpll = {
@@ -82,6 +87,11 @@ struct clk clk_fout_mpll = {
 	.id		= -1,
 };
 
+struct clk clk_fout_mpll_div2 = {
+	.name		= "fout_mpll_div2",
+	.id		= -1,
+};
+
 /* EPLL clock output */
 struct clk clk_fout_epll = {
 	.name		= "fout_epll",
@@ -125,6 +135,16 @@ struct clksrc_sources clk_src_bpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_bpll_list),
 };
 
+static struct clk *clk_src_bpll_fout_list[] = {
+	[0] = &clk_fout_bpll_div2,
+	[1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll_fout = {
+	.sources	= clk_src_bpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_bpll_fout_list),
+};
+
 /* Possible clock sources for CPLL Mux */
 static struct clk *clk_src_cpll_list[] = {
 	[0] = &clk_fin_cpll,
@@ -147,6 +167,16 @@ struct clksrc_sources clk_src_mpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };
 
+static struct clk *clk_src_mpll_fout_list[] = {
+	[0] = &clk_fout_mpll_div2,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll_fout = {
+	.sources	= clk_src_mpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_fout_list),
+};
+
 /* Possible clock sources for EPLL Mux */
 static struct clk *clk_src_epll_list[] = {
 	[0] = &clk_fin_epll,
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 387655b5ce05..4404f82d5979 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -8,6 +8,17 @@ choice
 	prompt "ST SPEAr Family"
 	default ARCH_SPEAR3XX
 
+config ARCH_SPEAR13XX
+	bool "ST SPEAr13xx with Device Tree"
+	select ARM_GIC
+	select CPU_V7
+	select USE_OF
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
+	help
+	  Supports for ARM's SPEAR13XX family
+
 config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx with Device Tree"
 	select ARM_VIC
@@ -27,6 +38,7 @@ config ARCH_SPEAR6XX
 endchoice
 
 # Adding SPEAr machine specific configuration files
+source "arch/arm/mach-spear13xx/Kconfig"
 source "arch/arm/mach-spear3xx/Kconfig"
 source "arch/arm/mach-spear6xx/Kconfig"
 
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index 38f1235f4632..2607bd05c525 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,7 @@
 #
 
 # Common support
-obj-y	:= restart.o time.o pl080.o
+obj-y	:= restart.o time.o
 
-obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= pl080.o shirq.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= pl080.o
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index 4471a232713a..ea0a61302b7e 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -16,6 +16,7 @@
 #include <mach/spear.h>
 #include <mach/generic.h>
 
+#define SPEAR13XX_SYS_SW_RES			(VA_MISC_BASE + 0x204)
 void spear_restart(char mode, const char *cmd)
 {
 	if (mode == 's') {
@@ -23,6 +24,10 @@ void spear_restart(char mode, const char *cmd)
 		soft_restart(0);
 	} else {
 		/* hardware reset, Use on-chip reset capability */
+#ifdef CONFIG_ARCH_SPEAR13XX
+		writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES);
+#else
 		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+#endif
 	}
 }