diff options
| author | Russell King <rmk+kernel@arm.linux.org.uk> | 2011-04-13 23:32:13 +0100 |
|---|---|---|
| committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2011-04-13 23:32:13 +0100 |
| commit | a84bd2ee81ea1bdbd238cd1c380ec25f50a876c5 (patch) | |
| tree | ba054d4b1a20dadec088fd4d8983fb5939227e46 /arch/arm | |
| parent | aec995900fbc8cffa9f0f9e797ef07a0beb2b079 (diff) | |
| parent | 7db6a7fa09884b34d2a5d4e6e4ed58664a5f0cf8 (diff) | |
| download | linux-a84bd2ee81ea1bdbd238cd1c380ec25f50a876c5.tar.bz2 | |
Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
Diffstat (limited to 'arch/arm')
131 files changed, 192 insertions, 180 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e8cbecc60fbe..377a7a595b08 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -694,7 +694,7 @@ config ARCH_S3C2410 the Samsung SMDK2410 development board (and derivatives). Note, the S3C2416 and the S3C2450 are so close that they even share - the same SoC ID code. This means that there is no seperate machine + the same SoC ID code. This means that there is no separate machine directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. config ARCH_S3C64XX diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 901e6dff8437..2cef8e13f9f8 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -34,7 +34,7 @@ config PROCESSOR_ID used instead of the auto-probing which utilizes the register. config REMAP_VECTORS_TO_RAM - bool 'Install vectors to the begining of RAM' if DRAM_BASE + bool 'Install vectors to the beginning of RAM' if DRAM_BASE depends on DRAM_BASE help The kernel needs to change the hardware exception vectors. diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 8f0f86db3602..97912fa48782 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[], unsigned lcnt0, lcnt1, ljmp0, ljmp1; struct _arg_LPEND lpend; - /* Max iterations possibile in DMALP is 256 */ + /* Max iterations possible in DMALP is 256 */ if (*bursts >= 256*256) { lcnt1 = 256; lcnt0 = 256; @@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi) } for (ev = 0; ev < pi->pcfg.num_events; ev++) { - if (val & (1 << ev)) { /* Event occured */ + if (val & (1 << ev)) { /* Event occurred */ struct pl330_thread *thrd; u32 inten = readl(regs + INTEN); int active; diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h index ee5e03efc1bb..3ad4c10d0d84 100644 --- a/arch/arm/include/asm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -18,7 +18,7 @@ * VFP storage area has: * - FPEXC, FPSCR, FPINST and FPINST2. * - 16 or 32 double precision data registers - * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) + * - an implementation-dependent word of state for FLDMX/FSTMX (pre-ARMv6) * * FPEXC will always be non-zero once the VFP has been used in this process. */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index c7afbc552c7f..7e30874377e6 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -126,7 +126,7 @@ #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) -#error Unknown cache maintainence model +#error Unknown cache maintenance model #endif #ifndef MULTI_CACHE diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h index 0ec35d1698aa..fbf71d75ec83 100644 --- a/arch/arm/include/asm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -10,8 +10,8 @@ * * This file provides the glue to stick the processor-specific bits * into the kernel in an efficient manner. The idea is to use branches - * when we're only targetting one class of TLB, or indirect calls - * when we're targetting multiple classes of TLBs. + * when we're only targeting one class of TLB, or indirect calls + * when we're targeting multiple classes of TLBs. */ #ifdef __KERNEL__ diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h index f35b86e68dd5..e4a04e4e5627 100644 --- a/arch/arm/include/asm/hardware/pl080.h +++ b/arch/arm/include/asm/hardware/pl080.h @@ -16,7 +16,7 @@ * make it not entierly compatible with the PL080 specification from * ARM. When in doubt, check the Samsung documentation first. * - * The Samsung defines are PL080S, and add an extra controll register, + * The Samsung defines are PL080S, and add an extra control register, * the ability to move more than 2^11 counts of data and some extra * OneNAND features. */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 9a87823642d0..885be097769d 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -249,7 +249,7 @@ do { \ * cache totally. This means that the cache becomes inconsistent, and, * since we use normal loads/stores as well, this is really bad. * Typically, this causes oopsen in filp_close, but could have other, - * more disasterous effects. There are two work-arounds: + * more disastrous effects. There are two work-arounds: * 1. Disable interrupts and emulate the atomic swap * 2. Clean the cache, perform atomic swap, flush the cache * diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h index 47f023aa8495..14749aec94bf 100644 --- a/arch/arm/include/asm/ucontext.h +++ b/arch/arm/include/asm/ucontext.h @@ -47,7 +47,7 @@ struct crunch_sigframe { #endif #ifdef CONFIG_IWMMXT -/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */ +/* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */ #define IWMMXT_MAGIC 0x12ef842a #define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8) diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 7a5760922914..40ee7e5045e4 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -158,7 +158,7 @@ static int emulate_swpX(unsigned int address, unsigned int *data, if (res == 0) { /* - * Barrier also required between aquiring a lock for a + * Barrier also required between acquiring a lock for a * protected resource and accessing the resource. Inserted for * same reason as above. */ diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 2e74a19874d1..295e1e77fa60 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -76,7 +76,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = { .pullup_pin = AT91_PIN_PD9, }; -/* FIXME: user dependant */ +/* FIXME: user dependent */ // static struct at91_cf_data __initdata carmeva_cf_data = { // .det_pin = AT91_PIN_PB0, // .rst_pin = AT91_PIN_PC5, diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h index 27ac6f550fe3..02182c16a022 100644 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -102,7 +102,7 @@ #define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ #define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ #define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */ +#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */ #define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ #define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ #define AT91_MCI_OVRE (1 << 30) /* Overrun */ diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index ddeb64536756..056dc6674b6b 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -208,7 +208,7 @@ extern void at91_gpio_resume(void); /*-------------------------------------------------------------------------*/ -/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should +/* wrappers for "new style" GPIO calls. the old AT91-specific ones should * eventually be removed (along with this errno.h inclusion), and the * gpio request/free calls should probably be implemented. */ diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c index 77f84b40dda9..a1f328357aa4 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c @@ -551,7 +551,7 @@ int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Config /****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -775,7 +775,7 @@ int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Cha /** * @brief Read data DMAed to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -941,7 +941,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurat /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 8d1baf3f4683..d87ad30dda35 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -629,7 +629,7 @@ EXPORT_SYMBOL(dma_get_device_descriptor_ring); * Configures a DMA channel. * * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. @@ -673,7 +673,7 @@ static int ConfigChannel(DMA_Handle_t handle) /** * Initializes all of the data structures associated with the DMA. * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h index 6c8da2b9fc1f..e6a1dc484ca7 100644 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h @@ -362,7 +362,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurati /** * @brief Read data DMA transferred to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -446,7 +446,7 @@ void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle * /****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -542,7 +542,7 @@ dmacHw_HANDLE_t dmacHw_getInterruptSource(void); /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h index 70eaea866cfe..161973385faf 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h @@ -180,7 +180,7 @@ typedef enum { #define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */ -/* Programable pin defines */ +/* Programmable pin defines */ #define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF) /* GPIO pin 0 - 60 */ #define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h index c78833acb37a..03238c299001 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h @@ -832,7 +832,7 @@ static inline void chipcHw_setUsbDevice(void) /****************************************************************************/ /** -* @brief Lower layer funtion to enable/disable a clock of a certain device +* @brief Lower layer function to enable/disable a clock of a certain device * * This function enables/disables a core clock * diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h index e01fc4607c91..0aeb6a6fe7f8 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h @@ -109,9 +109,9 @@ #define INTCHW_INTC0_DMA0C0 (1<<INTCHW_INTC0_DMA0C0_BITNUM) /* INTC1 - interrupt controller 1 */ -#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */ +#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */ #define INTCHW_INTC1_DDRVPMT_BITNUM 26 /* DDR and VPM HW phase align timeout interrupt (Not for A0) */ -#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interupt (For A0 only)) */ +#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interrupt (For A0 only)) */ #define INTCHW_INTC1_RTC2_BITNUM 25 /* Real time clock tamper interrupt */ #define INTCHW_INTC1_VDEC_BITNUM 24 /* Hantro Video Decoder interrupt */ /* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h index 06a355481ea6..0992842caa77 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -88,7 +88,7 @@ /* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ /* Enable wait pin during burst write or read */ #define REG_UMI_TCR_WAITEN 0x80000000 -/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */ +/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */ #define REG_UMI_TCR_LOWFREQ 0x40000000 /* 1=synch write, 0=async write */ #define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 6c389ff1020e..3e7be2de96de 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -11,7 +11,7 @@ * DM644X-EVM board. It has: * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. - * Additionaly realtime clock, IR remote control receiver, + * Additionally realtime clock, IR remote control receiver, * IR Blaster based on MSP430 (firmware although is different * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive * with PATA interface, two muxed red-green leds. diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 4a68c2b1ec11..0a95be1512bb 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -167,7 +167,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) /* * Time measurement across the target() function yields ~1500-1800us * time taken with no drivers on notification list. - * Setting the latency to 2000 us to accomodate addition of drivers + * Setting the latency to 2000 us to accommodate addition of drivers * to pre/post change notification list. */ policy->cpuinfo.transition_latency = 2000 * 1000; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 68fe4c289d77..b95b9196deed 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1123,7 +1123,7 @@ void __init da850_init(void) * This helps keeping the peripherals on this domain insulated * from CPU frequency changes caused by DVFS. The firmware sets * both PLL0 and PLL1 to the same frequency so, there should not - * be any noticible change even in non-DVFS use cases. + * be any noticeable change even in non-DVFS use cases. */ da850_set_async3_src(1); diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 76364d1345df..f68012239641 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -314,7 +314,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't' this be disabled? */ }; static struct clk timer3_clk = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 9a2376b3137c..5f8a65424184 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -274,7 +274,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't' this be disabled? */ }; static struct clk_lookup dm644x_clks[] = { diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index cea6b8972043..957fb87e832e 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -4,7 +4,7 @@ * Author: Kevin Hilman, Deep Root Systems, LLC * * Defines the cpu_is_*() macros for runtime detection of DaVinci - * device type. In addtion, if support for a given device is not + * device type. In addition, if support for a given device is not * compiled in to the kernel, the macros return 0 so that * resulting code can be optimized out. * diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index 180b8a9d0d21..a5a9ff70b198 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -101,7 +101,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) { /* - * map discontiguous hw irq range to continous sw irq range: + * map discontiguous hw irq range to continuous sw irq range: * * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) */ diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h index 939728b38d48..be9266b10fdb 100644 --- a/arch/arm/mach-exynos4/include/mach/gpio.h +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ +/* Practically, GPIO banks up to GPZ are the configurable gpio banks */ /* GPIO bank sizes */ #define EXYNOS4_GPIO_A0_NR (8) diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index af82a8fbb68b..14ac10b7ec02 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -276,7 +276,7 @@ static void exynos4_mct_tick_start(unsigned long cycles, /* update interrupt count buffer */ exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET); - /* enable MCT tick interupt */ + /* enable MCT tick interrupt */ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c index 1b3d3a2de95c..e8d08bf8965a 100644 --- a/arch/arm/mach-exynos4/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c @@ -38,14 +38,14 @@ void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-funtion 3 */ + /* Data pin GPK1[3:6] to special-function 3 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } case 4: for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { - /* Data pin GPK0[3:6] to special-funtion 2 */ + /* Data pin GPK0[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index 85f9433d4836..1e83f8cf236d 100644 --- a/arch/arm/mach-exynos4/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -35,7 +35,7 @@ void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ ctrl2 = readl(r + S3C_SDHCI_CONTROL2); diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 773ea0c95b9f..ba3dae352a2d 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -225,7 +225,7 @@ static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where) /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atux_pci_status(int clear) @@ -332,7 +332,7 @@ static struct pci_ops iop13xx_atux_ops = { /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atue_pci_status(int clear) diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index f781164e623f..24294b2bc469 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -15,7 +15,7 @@ /**************************************************************************** * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * the QNAP firmware. * Layout as used by QNAP: * 0x00000000-0x00080000 : "U-Boot" diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index e76d41bb7056..b9c80597b7bf 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -41,7 +41,7 @@ * DRAM clocking and refresh are slightly different for systems with DDR * DRAM or regular SDRAM devices. If SDRAM is used in the system, the * SDRAM will still be accessible in direct-run mode. In DDR based systems, - * a transistion to direct-run mode will stop all DDR accesses (no clocks). + * a transition to direct-run mode will stop all DDR accesses (no clocks). * Because of this, the code to switch power modes and the code to enter * and exit DRAM self-refresh modes must not be executed in DRAM. A small * section of IRAM is used instead for this. diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index ee8b02ed8011..7bfb827f3fe3 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -10,7 +10,7 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) -#define NR_BUILTIN_GPIO (192) +#define NR_BUILTIN_GPIO IRQ_GPIO_NUM #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 4621067c7720..713be155a44d 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -8,6 +8,15 @@ #define MFP_DRIVE_MEDIUM (0x2 << 13) #define MFP_DRIVE_FAST (0x3 << 13) +#undef MFP_CFG +#undef MFP_CFG_DRV + +#define MFP_CFG(pin, af) \ + (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM) + +#define MFP_CFG_DRV(pin, af, drv) \ + (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv) + /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF5) #define GPIO1_GPIO MFP_CFG(GPIO1, AF5) diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index aeb9ae23e6ce..99833b9485cf 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -9,7 +9,7 @@ * 2008-04-11: Jason Chagas <Jason.chagas@marvell.com> * 2008-10-08: Bin Yang <bin.yang@marvell.com> * - * The timers module actually includes three timers, each timer with upto + * The timers module actually includes three timers, each timer with up to * three match comparators. Timer #0 is used here in free-running mode as * the clock source, and match comparator #1 used as clock event device. * diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c index 7ffbd987eb5d..805d4ee53f7e 100644 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ b/arch/arm/mach-msm/acpuclock-arm11.c @@ -343,7 +343,7 @@ int acpuclk_set_rate(unsigned long rate, int for_power_collapse) } } - /* Set wait states for CPU inbetween frequency changes */ + /* Set wait states for CPU between frequency changes */ reg_clkctl = readl(A11S_CLK_CNTL_ADDR); reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ writel(reg_clkctl, A11S_CLK_CNTL_ADDR); diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c index cfa808dd4897..232f97a04504 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-msm/scm.c @@ -46,7 +46,7 @@ static DEFINE_MUTEX(scm_lock); * @id: command to be executed * @buf: buffer returned from scm_get_command_buffer() * - * An SCM command is layed out in memory as follows: + * An SCM command is laid out in memory as follows: * * ------------------- <--- struct scm_command * | command header | diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 927d5a181760..c1c5fb6a5b4c 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -79,7 +79,7 @@ /* - * Register useage + * Register usage * r8 - temporary * r9 - the driver buffer * r10 - temporary diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index d41fe2d0616a..0ad781db4e66 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -399,7 +399,7 @@ static void __init omap_sx1_init(void) sx1_mmc_init(); /* turn on USB power */ - /* sx1_setusbpower(1); cant do it here because i2c is not ready */ + /* sx1_setusbpower(1); can't do it here because i2c is not ready */ gpio_request(1, "A_IRDA_OFF"); gpio_request(11, "A_SWITCH"); gpio_request(15, "A_USB_ON"); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index b0f4c231595f..36f26c3fa25e 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {} * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 7a2df29400ca..23eed0035ed8 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -31,7 +31,7 @@ #endif /* - * These are the offsets from the begining of the fiq_buffer. They are put here + * These are the offsets from the beginning of the fiq_buffer. They are put here * since the buffer and header need to be accessed by drivers servicing devices * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 5f8a2fd06337..34cf982b9679 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -696,7 +696,7 @@ static void __init igep2_init(void) igep2_init_smsc911x(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep2_wlan_bt_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index b10db0e6ee62..2cf86c3cb1a3 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -440,7 +440,7 @@ static void __init igep3_init(void) igep3_leds_init(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep3_wifi_bt_init(); diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab878545bd9b..6cb6c03293df 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm, * clkdm_init - set up the clockdomain layer * @clkdms: optional pointer to an array of clockdomains to register * @init_autodeps: optional pointer to an array of autodeps to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Set up internal state. If a pointer to an array of clockdomains * @clkdms was supplied, loop through the list of clockdomains, diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 85b3dce65640..5823584d9cd7 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -125,7 +125,7 @@ struct clockdomain { }; /** - * struct clkdm_ops - Arch specfic function implementations + * struct clkdm_ops - Arch specific function implementations * @clkdm_add_wkdep: Add a wakeup dependency between clk domains * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains * @clkdm_read_wkdep: Read wakeup dependency state between clk domains diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index a44c52303405..1c240eff3918 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); /** * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states upto and including this for mpu domain - * @core_deepest_state: Enable states upto and including this for core domain + * @mpu_deepest_state: Enable states up to and including this for mpu domain + * @core_deepest_state: Enable states up to and including this for core domain * * This goes through the list of states available and enables and disables the * validity of C states based on deepest state that can be achieved for the diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 84d1b735fe80..7b8558564591 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -253,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data ARRAY_SIZE(omap_keyboard_latency), 0); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } @@ -373,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) od = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata), omap_mcspi_latency, ARRAY_SIZE(omap_mcspi_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n", name, oh->name); kfree(pdata); return 0; @@ -725,7 +725,7 @@ static int __init omap_init_wdt(void) od = omap_device_build(dev_name, id, oh, NULL, 0, omap_wdt_latency, ARRAY_SIZE(omap_wdt_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n", dev_name, oh->name); return 0; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 34922b2d2e3f..c9ff0e79703d 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0); kfree(p); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 413de18c1d2b..9529842ae054 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) kfree(pdata); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 137e1a5f3d85..b2f30bed5a20 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name); + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); kfree(mmc_data->slots[0].name); goto done; } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 565b9064a328..4a6ef6ab8458 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) ARRAY_SIZE(omap2_mcbsp_latency), false); kfree(pdata); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index bb043cbb3886..a4ab1e364313 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) seq_printf(s, "/* %s */\n", m->muxnames[mode]); /* - * XXX: Might be revisited to support differences accross + * XXX: Might be revisited to support differences across * same OMAP generation. */ seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def); diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h index adbea0d03e08..9fd93149ebd9 100644 --- a/arch/arm/mach-omap2/mux2430.h +++ b/arch/arm/mach-omap2/mux2430.h @@ -22,7 +22,7 @@ * absolute addresses. The name in the macro is the mode-0 name of * the pin. NOTE: These registers are 8-bits wide. * - * Note that these defines use SDMMC instead of MMC for compability + * Note that these defines use SDMMC instead of MMC for compatibility * with signal names used in 3630. */ #define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000 diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a860fb5024c2..e6e3810db77f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { * I2CHS IP's do not follow the usual pattern. * prcm_reg_id alone cannot be used to program * the iclk and fclk. Needs to be handled using - * additonal flags when clk handling is moved + * additional flags when clk handling is moved * to hwmod framework. */ .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index e2e605fe9138..05f6abc96b0d 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on) else /* * Enable VBUS Valid, AValid and IDDIG - * high impedence + * high impedance */ __raw_writel(IDDIG | AVALID | VBUSVALID, ctrl_base + USBOTGHS_CONTROL); } else { - /* Enable session END and IDIG to high impedence. */ + /* Enable session END and IDIG to high impedance. */ __raw_writel(SESSEND | IDDIG, ctrl_base + USBOTGHS_CONTROL); } diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 0a8e74e3e811..07d6140baa9d 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -308,7 +308,7 @@ int __init omap3_twl_init(void) * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, * in those scenarios this bit is to be cleared (enable = false). * - * Returns 0 on sucess, error is returned if I2C read/write fails. + * Returns 0 on success, error is returned if I2C read/write fails. */ int __init omap3_twl_set_sr_bit(bool enable) { diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 49c6513e90d8..9af08473bf10 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer * @pwrdm_list: array of struct powerdomain pointers to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Loop through the array of powerdomains @pwrdm_list, registering all * that are available on the current CPU. If pwrdm_list is supplied diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 027f40bd235d..d23d979b9c34 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -121,7 +121,7 @@ struct powerdomain { }; /** - * struct pwrdm_ops - Arch specfic function implementations + * struct pwrdm_ops - Arch specific function implementations * @pwrdm_set_next_pwrst: Set the target power state for a pd * @pwrdm_read_next_pwrst: Read the target power state set for a pd * @pwrdm_read_pwrst: Read the current power state of a pd diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 9c9c113788b9..469a920a74dc 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = { /* * The USBTLL Save-and-Restore mechanism is broken on - * 3430s upto ES3.0 and 3630ES1.0. Hence this feature + * 3430s up to ES3.0 and 3630ES1.0. Hence this feature * needs to be disabled on these chips. * Refer: 3430 errata ID i459 and 3630 errata ID i579 * diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 8f674c9442bf..13e24f913dd4 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) * driver register and sr device intializtion API's. Only one call * will ultimately succeed. * - * Currenly this function registers interrrupt handler for a particular SR + * Currently this function registers interrrupt handler for a particular SR * if smartreflex class driver is already registered and has * requested for interrupts and the SR interrupt line in present. */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index c6facf7becf8..6fb520999b6e 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -851,7 +851,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm, * @voltdm: pointer to the VDD whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed - * to be at and resets the voltage to that level. Should be used expecially + * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ void omap_voltage_reset(struct voltagedomain *voltdm) @@ -912,7 +912,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * This API searches only through the non-compensated voltages int the * voltage table. * Returns pointer to the voltage table entry corresponding to volt on - * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage + * success. Returns -ENODATA if no voltage table exisits for the passed voltage * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 1a5d6a0e2602..5ceafdccc456 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -19,7 +19,7 @@ #include "common.h" /* - * The Orion has fully programable address map. There's a separate address + * The Orion has fully programmable address map. There's a separate address * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB, * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own * address decode windows that allow it to access any of the Orion resources. diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 429ecafe9fdd..a5930f83958b 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -190,7 +190,7 @@ err_free_1: * The power front LEDs (blue and red) and SATA red LEDs are controlled via a * single GPIO line and are compatible with the leds-gpio driver. * - * The SATA blue LEDs have some hardware blink capabilities which are detailled + * The SATA blue LEDs have some hardware blink capabilities which are detailed * in the following array: * * SATAx blue LED | SATAx activity | LED state diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index f0f43e13ac87..e6d64494d3de 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -36,7 +36,7 @@ /**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 92f393f08fa4..9eac8192d923 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -56,7 +56,7 @@ /**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index b024a8b37439..c4639502efca 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -99,11 +99,24 @@ #define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) -#define NR_BUILTIN_GPIO 128 +#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + +static inline int irq_to_gpio(unsigned int irq) +{ + int gpio; + + if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1) + return irq - IRQ_GPIO0; + + gpio = irq - PXA_GPIO_IRQ_BASE; + if (gpio >= 2 && gpio < NR_BUILTIN_GPIO) + return gpio; + + return -1; +} #ifdef CONFIG_CPU_PXA26x /* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index a4285fc00878..038402404e39 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -93,9 +93,6 @@ #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) #define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) -#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) -#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) - /* * The following interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index e4fb4668c26e..207ecb49a61b 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -38,7 +38,7 @@ #define PCMD(x) __REG(0x40F50110 + ((x) << 2)) /* - * Slave Power Managment Unit + * Slave Power Management Unit */ #define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ #define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index faa408ab7ad7..0641f31a56b7 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -64,7 +64,7 @@ /* * CPLD registers: - * Only 4 registers, but spreaded over a 32MB address space. + * Only 4 registers, but spread over a 32MB address space. * Be gentle, and remap that over 32kB... */ diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index dd13bb63259b..23925db8ff74 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -458,7 +458,7 @@ static struct platform_device strataflash = { /* * Suspend/Resume bootstrap management * - * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled, + * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled, * this sequence is as follows : * - disables interrupts * - initialize SDRAM (self refresh RAM into active RAM) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 6bde5956358d..a4af8c52d7ee 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -285,7 +285,7 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask = 0; if (gpio >= 0 && gpio < 85) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 1cb5d0f9723f..909756eaf4b7 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -345,7 +345,7 @@ static inline void pxa27x_init_pm(void) {} */ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask; if (gpio >= 0 && gpio < 128) diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index cf68136cc668..b2b2a5bb275e 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -19,7 +19,7 @@ #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ /* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependant on the device) + * number of DMA channels, and not of all of them (dependent on the device) * can be attached to any DMA source. We therefore let the DMA core handle * the allocation of hardware channels to clients. */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 7f7c52947963..988a6863e54b 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -101,7 +101,7 @@ #define S3C2410_BANKCON_PMC16 (0x03) /* bank configurations for banks 0..7, note banks - * 6 and 7 have differnt configurations depending on + * 6 and 7 have different configurations depending on * the memory type bits */ #define S3C2410_BANKCON_Tacp2 (0x0 << 2) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 66f44440d5d3..079dcaa602d3 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -252,7 +252,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = { .def_trigger = "", }; -/* This is the blue LED on the device. Originaly used to indicate GPS activity +/* This is the blue LED on the device. Originally used to indicate GPS activity * by flashing. */ static struct s3c24xx_led_platdata n35_blue_led_pdata = { .name = "blue_led", diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index dfedc9c9e005..dd3120df09fe 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -155,7 +155,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { * the same timings, however, anything smaller than 1024x768 * will only be displayed in the top left corner of a 1024x768 * XGA output unless you add optional dip switches to the shield. - * Therefore timings for other resolutions have been ommited here. + * Therefore timings for other resolutions have been omitted here. */ [2] = { _LCD_DECLARE( diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index c35585cf8c4f..b197171e7d03 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -315,7 +315,7 @@ int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) case S3C2410_DMAOP_FLUSH: return s3c64xx_dma_flush(chan); - /* belive PAUSE/RESUME are no-ops */ + /* believe PAUSE/RESUME are no-ops */ case S3C2410_DMAOP_PAUSE: case S3C2410_DMAOP_RESUME: case S3C2410_DMAOP_STARTED: diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h index 4be4cc9abf75..07aa4d6054fe 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h @@ -29,7 +29,7 @@ #define WPALCON_H (0x19c) #define WPALCON_L (0x1a0) -/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but +/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but * different for WPAL2-4 */ /* In WPALCON_L (aka WPALCON) */ diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index f16946e456e9..be25879bb2ee 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -40,7 +40,7 @@ void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index 1f4b595534c2..a5a1e331f8ed 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/* Practically, GPIO banks upto MP03 are the configurable gpio banks */ +/* Practically, GPIO banks up to MP03 are the configurable gpio banks */ /* GPIO bank sizes */ #define S5PV210_GPIO_A0_NR (8) diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 746777d56df9..3e3ac05bb7b1 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -32,10 +32,10 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: - /* GPG1[3:6] special-funtion 3 */ + /* GPG1[3:6] special-function 3 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3)); case 4: - /* GPG0[3:6] special-funtion 2 */ + /* GPG0[3:6] special-function 2 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2)); default: break; diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c index c32e202731c1..a83b6c909f6b 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -38,7 +38,7 @@ void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index e697691eed28..41252d22e659 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -50,7 +50,7 @@ led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o # LEDs support obj-$(CONFIG_LEDS) += $(led-y) -# Miscelaneous functions +# Miscellaneous functions obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_SA1100_SSP) += ssp.o diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 07d4e8ba3719..aaa8acf76b7b 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -68,7 +68,7 @@ * clock change in ROM and jump to that code from the kernel. The main * disadvantage is that the ROM has to be modified, which is not * possible on all SA-1100 platforms. Another disadvantage is that - * jumping to ROM makes clock switching unecessary complicated. + * jumping to ROM makes clock switching unnecessary complicated. * * The idea behind this driver is that the memory configuration can be * changed while running from DRAM (even with interrupts turned on!) diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index 4f7ea012e1e5..bae8296f5dbf 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -1794,7 +1794,7 @@ (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR))) -#define DCSR_RUN 0x00000001 /* DMA RUNing */ +#define DCSR_RUN 0x00000001 /* DMA running */ #define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ #define DCSR_ERROR 0x00000004 /* DMA ERROR */ #define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 9d490c66891c..f50b00bd18a0 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -29,7 +29,7 @@ static unsigned long jornada_ssp_flags; /** * jornada_ssp_reverse - reverses input byte * - * we need to reverse all data we recieve from the mcu due to its physical location + * we need to reverse all data we receive from the mcu due to its physical location * returns : 01110111 -> 11101110 */ u8 inline jornada_ssp_reverse(u8 byte) @@ -179,7 +179,7 @@ static int __devinit jornada_ssp_probe(struct platform_device *dev) static int jornada_ssp_remove(struct platform_device *dev) { - /* Note that this doesnt actually remove the driver, since theres nothing to remove + /* Note that this doesn't actually remove the driver, since theres nothing to remove * It just makes sure everything is turned off */ GPSR = GPIO_GPIO25; ssp_exit(); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 783b66fa95fb..1e35fa976d64 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -947,7 +947,7 @@ static struct platform_device *ap4evb_devices[] __initdata = { &ap4evb_camera, }; -static int __init hdmi_init_pm_clock(void) +static void __init hdmi_init_pm_clock(void) { struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); int ret; @@ -988,20 +988,15 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) { + if (ret < 0) pr_err("Cannot set HDMI parent: %d\n", ret); - goto out; - } out: if (!IS_ERR(hdmi_ick)) clk_put(hdmi_ick); - return ret; } -device_initcall(hdmi_init_pm_clock); - -static int __init fsi_init_pm_clock(void) +static void __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; @@ -1010,7 +1005,7 @@ static int __init fsi_init_pm_clock(void) if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); pr_err("Cannot get FSI ICK: %d\n", ret); - return ret; + return; } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); @@ -1018,10 +1013,7 @@ static int __init fsi_init_pm_clock(void) pr_err("Cannot set FSI-A parent: %d\n", ret); clk_put(fsia_ick); - - return ret; } -device_initcall(fsi_init_pm_clock); /* * FIXME !! @@ -1348,6 +1340,9 @@ static void __init ap4evb_init(void) __raw_writel(srcr4 & ~(1 << 13), SRCR4); platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); + + hdmi_init_pm_clock(); + fsi_init_pm_clock(); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 8184d4d4f234..7da2ca24229d 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -423,7 +423,7 @@ static struct platform_device fsi_hdmi_device = { .name = "sh_fsi2_b_hdmi", }; -static int __init hdmi_init_pm_clock(void) +static void __init hdmi_init_pm_clock(void) { struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); int ret; @@ -467,17 +467,13 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) { + if (ret < 0) pr_err("Cannot set HDMI parent: %d\n", ret); - goto out; - } out: if (!IS_ERR(hdmi_ick)) clk_put(hdmi_ick); - return ret; } -device_initcall(hdmi_init_pm_clock); /* USB1 (Host) */ static void usb1_host_port_power(int port, int power) @@ -1218,6 +1214,8 @@ static void __init mackerel_init(void) sh7372_add_standard_devices(); platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); + + hdmi_init_pm_clock(); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h index e11560a525a1..21a59db638bb 100644 --- a/arch/arm/mach-shmobile/include/mach/mmc.h +++ b/arch/arm/mach-shmobile/include/mach/mmc.h @@ -9,7 +9,7 @@ #ifdef CONFIG_MACH_AP4EVB #include "mach/mmc-ap4eb.h" -#elif CONFIG_MACH_MACKEREL +#elif defined(CONFIG_MACH_MACKEREL) #include "mach/mmc-mackerel.h" #else #error "unsupported board." diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h index 6d6a205bcf90..9320aff0a20f 100644 --- a/arch/arm/mach-shmobile/include/mach/zboot.h +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -13,7 +13,7 @@ #ifdef CONFIG_MACH_AP4EVB #define MACH_TYPE MACH_TYPE_AP4EVB #include "mach/head-ap4evb.txt" -#elif CONFIG_MACH_MACKEREL +#elif defined(CONFIG_MACH_MACKEREL) #define MACH_TYPE MACH_TYPE_MACKEREL #include "mach/head-mackerel.txt" #else diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index e945ae28ee77..f4ef5eb317bd 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -223,7 +223,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, * - Change the source selector to invalid to stop the DMA from * FIFO to memory. * - Read the status register to know the number of pending - * bytes to be transfered. + * bytes to be transferred. * - Finally stop or program the DMA to the next buffer in the * list. */ @@ -244,7 +244,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, if (status & STA_BUSY) req->bytes_transferred -= to_transfer; - /* In continous transfer mode, DMA only tracks the count of the + /* In continuous transfer mode, DMA only tracks the count of the * half DMA buffer. So, if the DMA already finished half the DMA * then add the half buffer to the completed count. * diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index 39011bd9a925..d0132e8031a1 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -92,11 +92,11 @@ struct tegra_dma_req { /* This is a called from the DMA ISR context when the DMA is still in * progress and is actively filling same buffer. * - * In case of continous mode receive, this threshold is 1/2 the buffer + * In case of continuous mode receive, this threshold is 1/2 the buffer * size. In other cases, this will not even be called as there is no * hardware support for it. * - * In the case of continous mode receive, if there is next req already + * In the case of continuous mode receive, if there is next req already * queued, DMA programs the HW to use that req when this req is * completed. If there is no "next req" queued, then DMA ISR doesn't do * anything before calling this callback. diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index fabcc49abe80..5535dd0a78c9 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -263,7 +263,7 @@ static void disable_i2s0_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -283,7 +283,7 @@ static void disable_i2s1_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -649,7 +649,7 @@ static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) */ long clk_round_rate(struct clk *clk, unsigned long rate) { - /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */ + /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */ /* Else default to fixed value */ if (clk->round_rate) { diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index dc8746d7826e..af913741e6ec 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -52,7 +52,7 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { * on value present in GpioSel1 to GpioSel6 and AlternatFunction * register. This is the array of 7 configuration settings. * One has to compile time decide these settings. Below is the - * explaination of these setting + * explanation of these setting * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 0fefb34c11e4..16647b255378 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -58,7 +58,7 @@ #define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) #define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) -/* per7 base addressess */ +/* per7 base addresses */ #define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) #define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) #define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) @@ -68,7 +68,7 @@ #define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) #define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -/* per6 base addressess */ +/* per6 base addresses */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) #define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) #define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) @@ -79,11 +79,11 @@ #define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) -/* per5 base addressess */ +/* per5 base addresses */ #define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) #define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) -/* per4 base addressess */ +/* per4 base addresses */ #define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) #define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) #define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) @@ -106,7 +106,7 @@ #define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) #define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) -/* per2 base addressess */ +/* per2 base addresses */ #define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) #define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) #define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index d3644db467b7..f40c69656d8d 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -32,7 +32,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * Size Clean (ticks) Dirty (ticks) * 4096 21 20 21 53 55 54 diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index 49c2b66cf3dd..a7b276dbda11 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -34,7 +34,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * *** This needs benchmarking */ diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 6136e68ce953..dc18d81ef8ce 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -96,7 +96,7 @@ ENDPROC(v7_flush_dcache_all) * Flush the entire cache system. * The data cache flush is now achieved using atomic clean / invalidates * working outwards from L1 cache. This is done using Set/Way based cache - * maintainance instructions. + * maintenance instructions. * The instruction cache can still be invalidated back to the point of * unification in a single instruction. * diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 226e3d8351c2..6c4e7fd6c8af 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 86d9c2cf0bce..4ce947c19623 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 83d3dd34f846..c8884c5413a2 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 686043ee7281..413684660aad 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 665266da143c..7a06e5964f59 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -63,7 +63,7 @@ ENTRY(cpu_arm720_proc_fin) /* * Function: arm720_proc_do_idle(void) * Params : r0 = unused - * Purpose : put the processer in proper idle mode + * Purpose : put the processor in proper idle mode */ ENTRY(cpu_arm720_do_idle) mov pc, lr diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 394b623b0928..bf8a1d1cccb6 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 65536 diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 36154b1e792a..95ba1fc56e4d 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -54,7 +54,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. (I think this should + * cache line maintenance instructions. (I think this should * be 32768). */ #define CACHE_DLIMIT 8192 diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 89c5e0009c4c..541e4774eea1 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -77,7 +77,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 8192 diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index e32fa499194c..34261f9486b9 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -85,7 +85,7 @@ /* * Sanity check the PTE configuration for the code below - which makes - * certain assumptions about how these bits are layed out. + * certain assumptions about how these bits are laid out. */ #ifdef CONFIG_MMU #if L_PTE_SHARED != PTE_EXT_SHARED diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 387441269cc6..7c99cb4c8e4f 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -132,7 +132,7 @@ ENTRY(cpu_v6_do_suspend) mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0 mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mrc p15, 0, r9, c1, c0, 1 @ auxillary control register + mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register mrc p15, 0, r10, c1, c0, 2 @ co-processor access control mrc p15, 0, r11, c1, c0, 0 @ control register stmia r0, {r4 - r11} @@ -151,7 +151,7 @@ ENTRY(cpu_v6_do_resume) mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0 mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mcr p15, 0, r9, c1, c0, 1 @ auxillary control register + mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register mcr p15, 0, r10, c1, c0, 2 @ co-processor access control mcr p15, 0, ip, c2, c0, 2 @ TTB control register mcr p15, 0, ip, c7, c5, 4 @ ISB diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 713cea199ea8..babfba09c89f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -237,7 +237,7 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index ce81481becf1..4268a2bdf145 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -13,7 +13,7 @@ /* * A driver for the Freescale Semiconductor i.MXC CPUfreq module. - * The CPUFREQ driver is for controling CPU frequency. It allows you to change + * The CPUFREQ driver is for controlling CPU frequency. It allows you to change * the CPU clock speed on the fly. */ diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index bd9bb9799141..2e49e71b1b98 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -33,9 +33,9 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - @ this macro checks which interrupt occured + @ this macro checks which interrupt occurred @ and returns its number in irqnr - @ and returns if an interrupt occured in irqstat + @ and returns if an interrupt occurred in irqstat .macro get_irqnr_and_base, irqnr, irqstat, base, tmp #ifndef CONFIG_MXC_TZIC @ Load offset & priority of the highest priority diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 04c0d060d814..6bb96ef1600b 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -24,7 +24,7 @@ struct mxc_nand_platform_data { unsigned int width; /* data bus width in bytes */ - unsigned int hw_ecc:1; /* 0 if supress hardware ECC */ + unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ struct mtd_partition *parts; /* partition table */ int nr_parts; /* size of parts */ diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 7d9f815cedec..ea28f98d5d6a 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -280,7 +280,7 @@ EXPORT_SYMBOL(omap_dsp_get_mempool_base); * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 2ec3b5d9f214..c22217c2ee5f 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1019,7 +1019,7 @@ EXPORT_SYMBOL(omap_set_dma_callback); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting + * is a chance for CSSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_src_pos(int lch) @@ -1046,7 +1046,7 @@ EXPORT_SYMBOL(omap_get_dma_src_pos); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting + * is a chance for CDSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_dst_pos(int lch) diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index d6f9fa0f62af..cac2e8ac6968 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -93,7 +93,7 @@ extern void omap_gpio_restore_context(void); /* Wrappers for "new style" GPIO calls, using the new infrastructure * which lets us plug in FPGA, I2C, and other implementations. * * - * The original OMAP-specfic calls should eventually be removed. + * The original OMAP-specific calls should eventually be removed. */ #include <linux/errno.h> diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 12b316165037..1527929b445a 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -90,7 +90,7 @@ enum omap_ecc { /* 1-bit ecc: stored at end of spare area */ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at begining of spare area as romcode */ + /* 1-bit ecc: stored at beginning of spare area as romcode */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ }; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index d598d9fd65ac..5587acf0eb2c 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1103,7 +1103,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf) /* resend */ return -1; } else { - /* wait for recieve confirmation */ + /* wait for receive confirmation */ int attemps = 0; while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) { if (attemps++ > 1000) { diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 75f656471240..89e68e07b0a8 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -434,7 +434,7 @@ typedef unsigned long mfp_cfg_t; * * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which * represents a range of MFP pins from "start" to "end", with the offset - * begining at "offset", to define a single pin, let "end" = -1. + * beginning at "offset", to define a single pin, let "end" = -1. * * use * diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index c2064c308719..0291bd6e236e 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o -# Architecture dependant builds +# Architecture dependent builds obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index eea75ff81d15..b3d3d0278997 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -455,7 +455,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) /* whilst we will be called later on, we try and re-set the * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediatley having to re-set + * up resuming devices and then immediately having to re-set * a number of settings once these devices have restarted. * * as a note, it is expected devices are not used until they diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 6ad274e7593d..27ea852e3370 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -557,7 +557,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) break; case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* I belive in this case we do not have anything to do + /* I believe in this case we do not have anything to do * until the next buffer comes along, and we turn off the * reload */ return; diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 46dd078147d8..cd6d67c8382a 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -208,7 +208,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) } /* - * chained GPIO irq has been sucessfully registered, allocate new gpio + * chained GPIO irq has been successfully registered, allocate new gpio * int group and assign irq nubmers */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 9a82b8874918..983c578b8276 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -21,7 +21,7 @@ struct clk; * @set_parent: set the clock's parent, see clk_set_parent(). * * Group the common clock implementations together so that we - * don't have to keep setting the same fiels again. We leave + * don't have to keep setting the same fields again. We leave * enable in struct clk. * * Adding an extra layer of indirection into the process should diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 5603db0b79bc..3ad8386599c3 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -114,7 +114,7 @@ extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of functions for diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 5e04fa6eda74..1762dcb4cb9e 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -125,7 +125,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * * These values control the state of the weak pull-{up,down} resistors * available on most pins on the S3C series. Not all chips support both - * up or down settings, and it may be dependant on the chip that is being + * up or down settings, and it may be dependent on the chip that is being * used to whether the particular mode is available. */ #define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) @@ -138,7 +138,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * @pull: The configuration for the pull resistor. * * This function sets the state of the pull-{up,down} resistor for the - * specified pin. It will return 0 if successfull, or a negative error + * specified pin. It will return 0 if successful, or a negative error * code if the pin cannot support the requested pull setting. * * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. @@ -202,7 +202,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); * @drvstr: The new value of the driver strength * * This function sets the driver strength value for the specified pin. - * It will return 0 if successfull, or a negative error code if the pin + * It will return 0 if successful, or a negative error code if the pin * cannot support the requested setting. */ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index dac35d0a711d..8cad4cf19c3c 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -108,7 +108,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of function diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index b0bdf16549d5..058e09654fe8 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -57,7 +57,7 @@ enum clk_types { * @cfg_gpio: Configure the GPIO for a specific card bit-width * @cfg_card: Configure the interface for a specific card and speed. This * is necessary the controllers and/or GPIO blocks require the - * changing of driver-strength and other controls dependant on + * changing of driver-strength and other controls dependent on * the card and speed of operation. * * Initialisation data specific to either the machine or the platform @@ -108,7 +108,7 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; -/* Helper function availablity */ +/* Helper function availability */ extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w); diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c index b4ff8d74ac40..f85638c6f5ae 100644 --- a/arch/arm/plat-samsung/s3c-pl330.c +++ b/arch/arm/plat-samsung/s3c-pl330.c @@ -68,7 +68,7 @@ struct s3c_pl330_xfer { * @req: Two requests to communicate with the PL330 engine. * @callback_fn: Callback function to the client. * @rqcfg: Channel configuration for the xfers. - * @xfer_head: Pointer to the xfer to be next excecuted. + * @xfer_head: Pointer to the xfer to be next executed. * @dmac: Pointer to the DMAC that manages this channel, NULL if the * channel is available to be acquired. * @client: Client of this channel. NULL if the diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h index 2ae6606930a6..fcc0d0ad4a1f 100644 --- a/arch/arm/plat-spear/include/plat/clock.h +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -89,7 +89,7 @@ struct rate_config { * @sibling: node for list of clocks having same parents * @private_data: clock specific private data * @node: list to maintain clocks linearly - * @cl: clocklook up assoicated with this clock + * @cl: clocklook up associated with this clock * @dent: object for debugfs */ struct clk { |