diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-21 15:38:49 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-21 15:38:49 -0800 |
| commit | a8f3740feb12928be1aad19659bf3527ea8d6d96 (patch) | |
| tree | f455479d5b9edd38ed2ca2ab878d2217025960db /arch/arm | |
| parent | 6c5096e5538b455bc3bea2b02588c380f070d8c6 (diff) | |
| parent | 89dfe564b5926297ee29b973fe75e25c83c5e615 (diff) | |
| download | linux-a8f3740feb12928be1aad19659bf3527ea8d6d96.tar.bz2 | |
Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree conversions from Arnd Bergmann:
"These are device tree conversions for a number of platforms, with the
intention of turning code from board files into device tree
descriptions. Notable changes are:
- davinci bindings for pinctrl, MTD, RTC, watchdog and i2c
- nomadik bindings for all devices, removing the board files
- bcm2835 bindings for mmc and i2c
- tegra bindings for hdmi, keyboard, audio, as well as some updates
- at91 bindings for hardware ecc and for devices on RM9200
- mxs bindings for cfa100xx
- sunxi support for Miniand Hackberry board"
* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits)
Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
clk: tegra: initialise parent of uart clocks
ARM: tegra: remove clock-frequency properties from serial nodes
clk: tegra: fix driver to match DT binding
clk: tegra: local arrays should be static
clk: tegra: Add missing spinlock for hclk and pclk
clk: tegra: Implement locking for super clock
clk: tegra: fix wrong clock index between se to sata_cold
sunxi: a13-olinuxino: Add user LED to the device tree
ARM: davinci: da850 DT: add support for machine reboot
ARM: davinci: da850: add wdt DT node
ARM: davinci: da850: add DT node for I2C0
ARM: at91: at91sam9n12: add DT parameters to enable PMECC
ARM: at91: at91sam9x5: add DT parameters to enable PMECC
ARM: at91: add EMAC bindings to RM9200 DT
ARM: at91: add SSC bindings to RM9200 DT
ARM: at91: add MMC bindings to RM9200 DT
ARM: at91: Animeo IP: enable watchdog support
ARM: nomadik: fix OF compilation regression
...
Diffstat (limited to 'arch/arm')
49 files changed, 2631 insertions, 742 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2c370c869beb..2cb9c35b14e7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -896,10 +896,12 @@ config ARCH_NOMADIK select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC + select CLKSRC_NOMADIK_MTU select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 + select USE_OF select PINCTRL select PINCTRL_STN8815 select SPARSE_IRQ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 042f2111485b..411ab1614a0e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -96,11 +96,13 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ imx28-cfa10036.dtb \ + imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb +dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-beagle.dtb \ omap3-beagle-xm.dtb \ @@ -135,8 +137,10 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ + sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ + tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ tegra20-plutux.dtb \ @@ -145,6 +149,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-trimslice.dtb \ tegra20-ventana.dtb \ tegra20-whistler.dtb \ + tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 74d92cd29d87..5160210f74da 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -78,6 +78,10 @@ bus-width = <4>; }; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 222047f1ece9..b0268a5f4b4e 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -29,6 +29,9 @@ gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; + ssc0 = &ssc0; + ssc1 = &ssc1; + ssc2 = &ssc2; }; cpus { cpu@0 { @@ -88,6 +91,52 @@ interrupts = <20 4 0 21 4 0 22 4 0>; }; + mmc0: mmc@fffb4000 { + compatible = "atmel,hsmci"; + reg = <0xfffb4000 0x4000>; + interrupts = <10 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssc0: ssc@fffd0000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffd0000 0x4000>; + interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disable"; + }; + + ssc1: ssc@fffd4000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffd4000 0x4000>; + interrupts = <15 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + status = "disable"; + }; + + ssc2: ssc@fffd8000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffd8000 0x4000>; + interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; + status = "disable"; + }; + + macb0: ethernet@fffbc000 { + compatible = "cdns,at91rm9200-emac", "cdns,emac"; + reg = <0xfffbc000 0x4000>; + interrupts = <24 4 3>; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; + status = "disabled"; + }; + pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; @@ -207,6 +256,115 @@ }; }; + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 7 0x1 0x0 /* PA7 periph A */ + 0 8 0x1 0x0 /* PA8 periph A */ + 0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x0 /* PA10 periph A */ + 0 11 0x1 0x0 /* PA11 periph A */ + 0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0>; /* PA16 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <1 12 0x2 0x0 /* PB12 periph B */ + 1 13 0x2 0x0 /* PB13 periph B */ + 1 14 0x2 0x0 /* PB14 periph B */ + 1 15 0x2 0x0 /* PB15 periph B */ + 1 16 0x2 0x0 /* PB16 periph B */ + 1 17 0x2 0x0 /* PB17 periph B */ + 1 18 0x2 0x0 /* PB18 periph B */ + 1 19 0x2 0x0>; /* PB19 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 27 0x1 0x0>; /* PA27 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 28 0x1 0x1 /* PA28 periph A with pullup */ + 0 29 0x1 0x1>; /* PA29 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <1 3 0x2 0x1 /* PB3 periph B with pullup */ + 1 4 0x2 0x1 /* PB4 periph B with pullup */ + 1 5 0x2 0x1>; /* PB5 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 8 0x2 0x1 /* PA8 periph B with pullup */ + 0 9 0x2 0x1>; /* PA9 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 10 0x2 0x1 /* PA10 periph B with pullup */ + 0 11 0x2 0x1 /* PA11 periph B with pullup */ + 0 12 0x2 0x1>; /* PA12 periph B with pullup */ + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A */ + 1 1 0x1 0x0 /* PB1 periph A */ + 1 2 0x1 0x0>; /* PB2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 3 0x1 0x0 /* PB3 periph A */ + 1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + + ssc2 { + pinctrl_ssc2_tx: ssc2_tx-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0 /* PB13 periph A */ + 1 14 0x1 0x0>; /* PB14 periph A */ + }; + + pinctrl_ssc2_rx: ssc2_rx-0 { + atmel,pins = + <1 15 0x1 0x0 /* PB15 periph A */ + 1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0>; /* PB17 periph A */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 8aa48931e0a2..e586d85f8e23 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -44,6 +44,11 @@ status = "okay"; }; + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + usb1: gadget@fffb0000 { atmel,vbus-gpio = <&pioD 4 0>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 4801717566dd..7750f98dd764 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -382,8 +382,9 @@ reg = < 0x40000000 0x10000000 0xffffe000 0x00000600 0xffffe600 0x00000200 - 0x00100000 0x00100000 + 0x00108000 0x00018000 >; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 0376bf4fd66b..d400f8de4387 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -71,7 +71,10 @@ nand0: nand@40000000 { nand-bus-width = <8>; - nand-ecc-mode = "soft"; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; nand-on-flash-bbt; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d112c3af8ce2..aa98e641931f 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -512,7 +512,11 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x40000000 0x10000000 + 0xffffe000 0x600 /* PMECC Registers */ + 0xffffe600 0x200 /* PMECC Error Location Registers */ + 0x00108000 0x18000 /* PMECC looup table in ROM code */ >; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 31e7be23703d..4027ac7e4502 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -26,7 +26,10 @@ ahb { nand0: nand@40000000 { nand-bus-width = <8>; - nand-ecc-mode = "soft"; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* Enable PMECC */ + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; nand-on-flash-bbt; status = "okay"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 9b72054a0bc0..aafda174a605 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,5 +1,4 @@ /dts-v1/; -/memreserve/ 0x0c000000 0x04000000; /include/ "bcm2835.dtsi" / { @@ -25,3 +24,18 @@ brcm,function = <7>; /* alt3 */ }; }; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; +}; + +&sdhci { + status = "okay"; + bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 8917550fd1bb..4bf2a8774aa7 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -63,5 +63,49 @@ interrupt-controller; #interrupt-cells = <2>; }; + + i2c0: i2c@20205000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e205000 0x1000>; + interrupts = <2 21>; + clocks = <&clk_i2c>; + status = "disabled"; + }; + + i2c1: i2c@20804000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e804000 0x1000>; + interrupts = <2 21>; + clocks = <&clk_i2c>; + status = "disabled"; + }; + + sdhci: sdhci { + compatible = "brcm,bcm2835-sdhci"; + reg = <0x7e300000 0x100>; + interrupts = <2 30>; + clocks = <&clk_mmc>; + status = "disabled"; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk_mmc: mmc { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + clk_i2c: i2c { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <150000000>; + }; }; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 37dc5a3243b8..f712fb607a42 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -15,6 +15,9 @@ model = "DA850/AM1808/OMAP-L138 EVM"; soc { + pmx_core: pinmux@1c14120 { + status = "okay"; + }; serial0: serial@1c42000 { status = "okay"; }; @@ -24,5 +27,22 @@ serial2: serial@1d0d000 { status = "okay"; }; + rtc0: rtc@1c23000 { + status = "okay"; + }; + i2c0: i2c@1c22000 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + }; + wdt: wdt@1c21000 { + status = "okay"; + }; + }; + nand_cs3@62000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_cs3_pins>; }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 640ab75c20db..3ec1bda64356 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -28,14 +28,47 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x01c00000 0x400000>; + interrupt-parent = <&intc>; + pmx_core: pinmux@1c14120 { + compatible = "pinctrl-single"; + reg = <0x14120 0x50>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + status = "disabled"; + + nand_cs3_pins: pinmux_nand_pins { + pinctrl-single,bits = < + /* EMA_OE, EMA_WE */ + 0x1c 0x00110000 0x00ff0000 + /* EMA_CS[4],EMA_CS[3]*/ + 0x1c 0x00000110 0x00000ff0 + /* + * EMA_D[0], EMA_D[1], EMA_D[2], + * EMA_D[3], EMA_D[4], EMA_D[5], + * EMA_D[6], EMA_D[7] + */ + 0x24 0x11111111 0xffffffff + /* EMA_A[1], EMA_A[2] */ + 0x30 0x01100000 0x0ff00000 + >; + }; + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,bits = < + /* I2C0_SDA,I2C0_SCL */ + 0x10 0x00002200 0x0000ff00 + >; + }; + }; serial0: serial@1c42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; clock-frequency = <150000000>; reg-shift = <2>; interrupts = <25>; - interrupt-parent = <&intc>; status = "disabled"; }; serial1: serial@1d0c000 { @@ -44,7 +77,6 @@ clock-frequency = <150000000>; reg-shift = <2>; interrupts = <53>; - interrupt-parent = <&intc>; status = "disabled"; }; serial2: serial@1d0d000 { @@ -53,8 +85,40 @@ clock-frequency = <150000000>; reg-shift = <2>; interrupts = <61>; - interrupt-parent = <&intc>; status = "disabled"; }; + rtc0: rtc@1c23000 { + compatible = "ti,da830-rtc"; + reg = <0x23000 0x1000>; + interrupts = <19 + 19>; + status = "disabled"; + }; + i2c0: i2c@1c22000 { + compatible = "ti,davinci-i2c"; + reg = <0x22000 0x1000>; + interrupts = <15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + wdt: wdt@1c21000 { + compatible = "ti,davinci-wdt"; + reg = <0x21000 0x1000>; + status = "disabled"; + }; + }; + nand_cs3@62000000 { + compatible = "ti,davinci-nand"; + reg = <0x62000000 0x807ff + 0x68000000 0x8000>; + ti,davinci-chipselect = <1>; + ti,davinci-mask-ale = <0>; + ti,davinci-mask-cle = <0>; + ti,davinci-mask-chipsel = <0>; + ti,davinci-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + ti,davinci-nand-use-bbt; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts new file mode 100644 index 000000000000..c2ef3a3d655e --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -0,0 +1,77 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10049 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10037 Board"; + compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10037>; + + hog_pins_cfa10037: hog-10037@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index bdc80a4453dd..a0d3e9f1738e 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -23,69 +23,120 @@ apbh@80000000 { pinctrl@80018000 { pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10049>; + pinctrl-1 = <&hog_pins_cfa10049 + &hog_pins_cfa10049_pullup>; hog_pins_cfa10049: hog-10049@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + 0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - spi3_pins_cfa10049: spi3-cfa10049@0 { + hog_pins_cfa10049_pullup: hog-10049-pullup@0 { reg = <0>; fsl,pinmux-ids = < - 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */ - 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ - 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ - 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ - 0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */ + 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ + 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ >; - fsl,drive-strength = <1>; + fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <1>; }; - }; - ssp3: ssp@80016000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi3_pins_cfa10049>; - status = "okay"; + spi2_pins_cfa10049: spi2-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ + 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ + 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; - gpio5: gpio5@0 { - compatible = "fairchild,74hc595"; - gpio-controller; - #gpio-cells = <2>; + spi3_pins_cfa10049: spi3-cfa10049@0 { reg = <0>; - registers-number = <2>; - spi-max-frequency = <100000>; + fsl,pinmux-ids = < + 0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */ + 0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */ + 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ + 0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */ + 0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; }; - gpio6: gpio6@1 { - compatible = "fairchild,74hc595"; - gpio-controller; - #gpio-cells = <2>; - reg = <1>; - registers-number = <4>; - spi-max-frequency = <100000>; + lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; }; - dac0: dh2228@2 { - compatible = "rohm,dh2228fv"; - reg = <2>; - spi-max-frequency = <100000>; + lcdif_pins_cfa10049: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; }; }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10049 + &lcdif_pins_cfa10049>; + status = "okay"; + }; }; apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&pwm3_pins_b>; + status = "okay"; + }; + i2c1: i2c@8005a000 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; @@ -113,6 +164,19 @@ i2c@3 { reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio2>; + interrupts = <19 0x2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20>; + }; }; }; @@ -153,4 +217,92 @@ status = "okay"; }; }; + + spi2 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_cfa10049>; + status = "okay"; + gpio-sck = <&gpio2 16 0>; + gpio-mosi = <&gpio2 17 0>; + gpio-miso = <&gpio2 18 0>; + cs-gpios = <&gpio3 23 0>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hx8357: hx8357@0 { + compatible = "himax,hx8357b", "himax,hx8357"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + gpios-reset = <&gpio3 30 0>; + im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>; + }; + }; + + spi3 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_cfa10049>; + status = "okay"; + gpio-sck = <&gpio0 24 0>; + gpio-mosi = <&gpio0 28 0>; + cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>; + num-chipselects = <3>; + #address-cells = <1>; + #size-cells = <0>; + + gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + }; + + gpio6: gpio6@1 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <1>; + registers-number = <4>; + spi-max-frequency = <100000>; + }; + + dac0: dh2228@2 { + compatible = "rohm,dh2228fv"; + reg = <2>; + spi-max-frequency = <100000>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rotary_button { + label = "rotary_button"; + gpios = <&gpio3 26 1>; + debounce-interval = <10>; + linux,code = <28>; + }; + }; + + rotary { + compatible = "rotary-encoder"; + gpios = <&gpio3 24 1>, <&gpio3 25 1>; + linux,axis = <1>; /* REL_Y */ + rotary-encoder,relative-axis; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 3bab6b00c52d..6ce3d17c3a29 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -177,6 +177,7 @@ lradc@80050000 { status = "okay"; + fsl,lradc-touchscreen-wires = <4>; }; duart: serial@80074000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 13b7053d799e..7ba49662b9bc 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -502,6 +502,16 @@ fsl,pull-up = <0>; }; + pwm3_pins_b: pwm3@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + pwm4_pins_a: pwm4@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts new file mode 100644 index 000000000000..b28fbf3408e3 --- /dev/null +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -0,0 +1,30 @@ +/* + * Device Tree for the ST-Ericsson Nomadik S8815 board + * Produced by Calao Systems + */ + +/dts-v1/; +/include/ "ste-nomadik-stn8815.dtsi" + +/ { + model = "Calao Systems USB-S8815"; + compatible = "calaosystems,usb-s8815"; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; + }; + + /* Custom board node with GPIO pins to active etc */ + usb-s8815 { + /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ + ethernet-gpio { + gpios = <&gpio3 19 0x1>; + interrupts = <19 0x1>; + interrupt-parent = <&gpio3>; + }; + /* This will bias the MMC/SD card detect line */ + mmcsd-gpio { + gpios = <&gpio3 16 0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi new file mode 100644 index 000000000000..4a4aab395141 --- /dev/null +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -0,0 +1,256 @@ +/* + * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC + */ +/include/ "skeleton.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0x00000000 0x04000000>, + <0x08000000 0x04000000>; + }; + + L2: l2-cache { + compatible = "arm,l210-cache"; + reg = <0x10210000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <30>; + cache-unified; + cache-level = <2>; + }; + + mtu0 { + /* Nomadik system timer */ + reg = <0x101e2000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <4>; + }; + + mtu1 { + /* Secondary timer */ + reg = <0x101e3000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <5>; + }; + + gpio0: gpio@101e4000 { + compatible = "st,nomadik-gpio"; + reg = <0x101e4000 0x80>; + interrupt-parent = <&vica>; + interrupts = <6>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <0>; + }; + + gpio1: gpio@101e5000 { + compatible = "st,nomadik-gpio"; + reg = <0x101e5000 0x80>; + interrupt-parent = <&vica>; + interrupts = <7>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <1>; + }; + + gpio2: gpio@101e6000 { + compatible = "st,nomadik-gpio"; + reg = <0x101e6000 0x80>; + interrupt-parent = <&vica>; + interrupts = <8>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <2>; + }; + + gpio3: gpio@101e7000 { + compatible = "st,nomadik-gpio"; + reg = <0x101e7000 0x80>; + interrupt-parent = <&vica>; + interrupts = <9>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <3>; + }; + + pinctrl { + compatible = "stericsson,nmk-pinctrl-stn8815"; + }; + + /* A NAND flash of 128 MiB */ + fsmc: flash@40000000 { + compatible = "stericsson,fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10100000 0x1000>, /* FSMC Register*/ + <0x40000000 0x2000>, /* NAND Base DATA */ + <0x41000000 0x2000>, /* NAND Base ADDR */ + <0x40800000 0x2000>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; + status = "okay"; + + partition@0 { + label = "X-Loader(NAND)"; + reg = <0x0 0x40000>; + }; + partition@40000 { + label = "MemInit(NAND)"; + reg = <0x40000 0x40000>; + }; + partition@80000 { + label = "BootLoader(NAND)"; + reg = <0x80000 0x200000>; + }; + partition@280000 { + label = "Kernel zImage(NAND)"; + reg = <0x280000 0x300000>; + }; + partition@580000 { + label = "Root Filesystem(NAND)"; + reg = <0x580000 0x1600000>; + }; + partition@1b80000 { + label = "User Filesystem(NAND)"; + reg = <0x1b80000 0x6480000>; + }; + }; + + external-bus@34000000 { + compatible = "simple-bus"; + reg = <0x34000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x34000000 0x1000000>; + ethernet@300 { + compatible = "smsc,lan91c111"; + reg = <0x300 0x0fd00>; + }; + }; + + /* I2C0 connected to the STw4811 power management chip */ + i2c0 { + compatible = "i2c-gpio"; + gpios = <&gpio1 31 0>, /* sda */ + <&gpio1 30 0>; /* scl */ + #address-cells = <1>; + #size-cells = <0>; + + stw4811@2d { + compatible = "st,stw4811"; + reg = <0x2d>; + }; + }; + + /* I2C1 connected to various sensors */ + i2c1 { + compatible = "i2c-gpio"; + gpios = <&gpio1 22 0>, /* sda */ + <&gpio1 21 0>; /* scl */ + #address-cells = <1>; + #size-cells = <0>; + + camera@2d { + compatible = "st,camera"; + reg = <0x10>; + }; + stw5095@1a { + compatible = "st,stw5095"; + reg = <0x1a>; + }; + lis3lv02dl@1d { + compatible = "st,lis3lv02dl"; + reg = <0x1d>; + }; + }; + + /* I2C2 connected to the USB portions of the STw4811 only */ + i2c2 { + compatible = "i2c-gpio"; + gpios = <&gpio2 10 0>, /* sda */ + <&gpio2 9 0>; /* scl */ + #address-cells = <1>; + #size-cells = <0>; + stw4811@2d { + compatible = "st,stw4811-usb"; + reg = <0x2d>; + }; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vica: intc@0x10140000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140000 0x20>; + }; + + vicb: intc@0x10140020 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140020 0x20>; + }; + + uart0: uart@101fd000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101fd000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <12>; + }; + + uart1: uart@101fb000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101fb000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <17>; + }; + + uart2: uart@101f2000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101f2000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <28>; + status = "disabled"; + }; + + rng: rng@101b0000 { + compatible = "arm,primecell"; + reg = <0x101b0000 0x1000>; + }; + + rtc: rtc@101e8000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x101e8000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <10>; + }; + + mmcsd: sdi@101f6000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x101f6000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <22>; + max-frequency = <48000000>; + bus-width = <4>; + mmc-cap-mmc-highspeed; + mmc-cap-sd-highspeed; + cd-gpios = <&gpio3 15 0x1>; + cd-inverted; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts new file mode 100644 index 000000000000..f84549ad791e --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i-a10.dtsi" + +/ { + model = "Miniand Hackberry"; + compatible = "miniand,hackberry", "allwinner,sun4i-a10"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: uart@01c28000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi new file mode 100644 index 000000000000..444162090042 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -0,0 +1,491 @@ +/include/ "tegra20.dtsi" + +/ { + model = "Toradex Colibri T20 512MB"; + compatible = "toradex,colibri_t20-512", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + host1x { + hdmi { + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&i2c_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + audio_refclk { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + crt { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + displaya { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", + "ld4", "ld5", "ld6", "ld7", "ld8", + "ld9", "ld10", "ld11", "ld12", "ld13", + "ld14", "ld15", "ld16", "ld17", + "lhs", "lpw0", "lpw2", "lsc0", + "lsc1", "lsck", "lsda", "lspi", "lvs"; + nvidia,function = "displaya"; + nvidia,tristate = <1>; + }; + gpio_dte { + nvidia,pins = "dte"; + nvidia,function = "rsvd1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + gpio_gmi { + nvidia,pins = "ata", "atc", "atd", "ate", + "dap1", "dap2", "dap4", "gpu", "irrx", + "irtx", "spia", "spib", "spic"; + nvidia,function = "gmi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + gpio_pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + gpio_uac { + nvidia,pins = "uac"; + nvidia,function = "rsvd2"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + hdint { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + nvidia,tristate = <1>; + }; + i2c1 { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + i2c3 { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + i2cddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + irda { + nvidia,pins = "uad"; + nvidia,function = "irda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + nand { + nvidia,pins = "kbca", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "nand"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + owc { + nvidia,pins = "owc"; + nvidia,function = "owr"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + nvidia,tristate = <0>; + }; + pwm { + nvidia,pins = "sdb", "sdc", "sdd"; + nvidia,function = "pwm"; + nvidia,tristate = <1>; + }; + sdio4 { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + spi1 { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + spi4 { + nvidia,pins = "slxa", "slxc", "slxd", "slxk"; + nvidia,function = "spi4"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + uarta { + nvidia,pins = "sdio1"; + nvidia,function = "uarta"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + uartd { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + ulpi { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + ulpi_refclk { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + usb_gpio { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + vi { + nvidia,pins = "dta", "dtb", "dtc", "dtd"; + nvidia,function = "vi"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + vi_sc { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + }; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + }; + + i2c_ddc: i2c@7000c400 { + clock-frequency = <100000>; + }; + + i2c@7000c500 { + clock-frequency = <400000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1275000>; + regulator-max-microvolt = <1275000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* LDO3 is not connected to anything */ + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vdd_fuse"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + hdmi_vdd_reg: regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_pll_reg: regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + temperature-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + }; + + memory-controller@7000f400 { + emc-table@83250 { + reg = <83250>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <83250>; + nvidia,emc-registers = <0x00000005 0x00000011 + 0x00000004 0x00000002 0x00000004 0x00000004 + 0x00000001 0x0000000a 0x00000002 0x00000002 + 0x00000001 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x0000025f + 0x00000000 0x00000003 0x00000003 0x00000002 + 0x00000002 0x00000001 0x00000008 0x000000c8 + 0x00000003 0x00000005 0x00000003 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x00520006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + emc-table@133200 { + reg = <133200>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <133200>; + nvidia,emc-registers = <0x00000008 0x00000019 + 0x00000006 0x00000002 0x00000004 0x00000004 + 0x00000001 0x0000000a 0x00000002 0x00000002 + 0x00000002 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x0000039f + 0x00000000 0x00000003 0x00000003 0x00000002 + 0x00000002 0x00000001 0x00000008 0x000000c8 + 0x00000003 0x00000007 0x00000003 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x00510006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + emc-table@166500 { + reg = <166500>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <166500>; + nvidia,emc-registers = <0x0000000a 0x00000021 + 0x00000008 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000a 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x000004df + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x00000009 0x000000c8 + 0x00000003 0x00000009 0x00000004 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x004f0006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <333000>; + nvidia,emc-registers = <0x00000014 0x00000041 + 0x0000000f 0x00000005 0x00000004 0x00000005 + 0x00000003 0x0000000a 0x00000005 0x00000005 + 0x00000004 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x000009ff + 0x00000000 0x00000003 0x00000003 0x00000005 + 0x00000005 0x00000001 0x0000000e 0x000000c8 + 0x00000003 0x00000011 0x00000006 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x00380006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + + ac97: ac97 { + status = "okay"; + nvidia,codec-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + nvidia,codec-sync-gpio = <&gpio 120 0>; /* gpio PP0 */ + }; + + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 23 0>; /* gpio PC7 */ + }; + + sound { + compatible = "nvidia,tegra-audio-wm9712-colibri_t20", + "nvidia,tegra-audio-wm9712"; + nvidia,model = "Colibri T20 AC97 Audio"; + + nvidia,audio-routing = + "Headphone", "HPOUTL", + "Headphone", "HPOUTR", + "LineIn", "LINEINL", + "LineIn", "LINEINR", + "Mic", "MIC1"; + + nvidia,ac97-controller = <&ac97>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "internal_usb"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + gpio = <&gpio 217 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 2b4169702c8d..61d027f03617 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -3,7 +3,7 @@ /include/ "tegra20.dtsi" / { - model = "NVIDIA Tegra2 Harmony evaluation board"; + model = "NVIDIA Tegra20 Harmony evaluation board"; compatible = "nvidia,harmony", "nvidia,tegra20"; memory { @@ -252,7 +252,6 @@ serial@70006300 { status = "okay"; - clock-frequency = <216000000>; }; i2c@7000c000 { @@ -452,6 +451,123 @@ bus-width = <8>; }; + kbc { + status = "okay"; + nvidia,debounce-delay-ms = <2>; + nvidia,repeat-delay-ms = <160>; + nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; + linux,keymap = <0x00020011 /* KEY_W */ + 0x0003001F /* KEY_S */ + 0x0004001E /* KEY_A */ + 0x0005002C /* KEY_Z */ + 0x000701D0 /* KEY_FN */ + 0x0107008B /* KEY_MENU */ + 0x02060038 /* KEY_LEFTALT */ + 0x02070064 /* KEY_RIGHTALT */ + 0x03000006 /* KEY_5 */ + 0x03010005 /* KEY_4 */ + 0x03020013 /* KEY_R */ + 0x03030012 /* KEY_E */ + 0x03040021 /* KEY_F */ + 0x03050020 /* KEY_D */ + 0x0306002D /* KEY_X */ + 0x04000008 /* KEY_7 */ + 0x04010007 /* KEY_6 */ + 0x04020014 /* KEY_T */ + 0x04030023 /* KEY_H */ + 0x04040022 /* KEY_G */ + 0x0405002F /* KEY_V */ + 0x0406002E /* KEY_C */ + 0x04070039 /* KEY_SPACE */ + 0x0500000A /* KEY_9 */ + 0x05010009 /* KEY_8 */ + 0x05020016 /* KEY_U */ + 0x05030015 /* KEY_Y */ + 0x05040024 /* KEY_J */ + 0x05050031 /* KEY_N */ + 0x05060030 /* KEY_B */ + 0x0507002B /* KEY_BACKSLASH */ + 0x0600000C /* KEY_MINUS */ + 0x0601000B /* KEY_0 */ + 0x06020018 /* KEY_O */ + 0x06030017 /* KEY_I */ + 0x06040026 /* KEY_L */ + 0x06050025 /* KEY_K */ + 0x06060033 /* KEY_COMMA */ + 0x06070032 /* KEY_M */ + 0x0701000D /* KEY_EQUAL */ + 0x0702001B /* KEY_RIGHTBRACE */ + 0x0703001C /* KEY_ENTER */ + 0x0707008B /* KEY_MENU */ + 0x0804002A /* KEY_LEFTSHIFT */ + 0x08050036 /* KEY_RIGHTSHIFT */ + 0x0905001D /* KEY_LEFTCTRL */ + 0x09070061 /* KEY_RIGHTCTRL */ + 0x0B00001A /* KEY_LEFTBRACE */ + 0x0B010019 /* KEY_P */ + 0x0B020028 /* KEY_APOSTROPHE */ + 0x0B030027 /* KEY_SEMICOLON */ + 0x0B040035 /* KEY_SLASH */ + 0x0B050034 /* KEY_DOT */ + 0x0C000044 /* KEY_F10 */ + 0x0C010043 /* KEY_F9 */ + 0x0C02000E /* KEY_BACKSPACE */ + 0x0C030004 /* KEY_3 */ + 0x0C040003 /* KEY_2 */ + 0x0C050067 /* KEY_UP */ + 0x0C0600D2 /* KEY_PRINT */ + 0x0C070077 /* KEY_PAUSE */ + 0x0D00006E /* KEY_INSERT */ + 0x0D01006F /* KEY_DELETE */ + 0x0D030068 /* KEY_PAGEUP */ + 0x0D04006D /* KEY_PAGEDOWN */ + 0x0D05006A /* KEY_RIGHT */ + 0x0D06006C /* KEY_DOWN */ + 0x0D070069 /* KEY_LEFT */ + 0x0E000057 /* KEY_F11 */ + 0x0E010058 /* KEY_F12 */ + 0x0E020042 /* KEY_F8 */ + 0x0E030010 /* KEY_Q */ + 0x0E04003E /* KEY_F4 */ + 0x0E05003D /* KEY_F3 */ + 0x0E060002 /* KEY_1 */ + 0x0E070041 /* KEY_F7 */ + 0x0F000001 /* KEY_ESC */ + 0x0F010029 /* KEY_GRAVE */ + 0x0F02003F /* KEY_F5 */ + 0x0F03000F /* KEY_TAB */ + 0x0F04003B /* KEY_F1 */ + 0x0F05003C /* KEY_F2 */ + 0x0F06003A /* KEY_CAPSLOCK */ + 0x0F070040 /* KEY_F6 */ + 0x14000047 /* KEY_KP7 */ + 0x15000049 /* KEY_KP9 */ + 0x15010048 /* KEY_KP8 */ + 0x1502004B /* KEY_KP4 */ + 0x1504004F /* KEY_KP1 */ + 0x1601004E /* KEY_KPSLASH */ + 0x1602004D /* KEY_KP6 */ + 0x1603004C /* KEY_KP5 */ + 0x16040051 /* KEY_KP3 */ + 0x16050050 /* KEY_KP2 */ + 0x16070052 /* KEY_KP0 */ + 0x1B010037 /* KEY_KPASTERISK */ + 0x1B03004A /* KEY_KPMINUS */ + 0x1B04004E /* KEY_KPPLUS */ + 0x1B050053 /* KEY_KPDOT */ + 0x1C050073 /* KEY_VOLUMEUP */ + 0x1D030066 /* KEY_HOME */ + 0x1D04006B /* KEY_END */ + 0x1D0500E1 /* KEY_BRIGHTNESSUP */ + 0x1D060072 /* KEY_VOLUMEDOWN */ + 0x1D0700E0 /* KEY_BRIGHTNESSDOWN */ + 0x1E000045 /* KEY_NUMLOCK */ + 0x1E010046 /* KEY_SCROLLLOCK */ + 0x1E020071 /* KEY_MUTE */ + 0x1F0400D6>; /* KEY_QUESTION */ + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts new file mode 100644 index 000000000000..52f1103907d7 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -0,0 +1,89 @@ +/dts-v1/; + +/include/ "tegra20-colibri-512.dtsi" + +/ { + model = "Toradex Colibri T20 512MB on Iris"; + compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; + + host1x { + hdmi { + status = "okay"; + }; + }; + + pinmux { + state_default: pinmux { + hdint { + nvidia,tristate = <0>; + }; + + i2cddc { + nvidia,tristate = <0>; + }; + + sdio4 { + nvidia,tristate = <0>; + }; + + uarta { + nvidia,tristate = <0>; + }; + + uartd { + nvidia,tristate = <0>; + }; + }; + }; + + usb@c5000000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb@c5008000 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + }; + + i2c_ddc: i2c@7000c400 { + status = "okay"; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <4>; + vmmc-supply = <&vcc_sd_reg>; + vqmmc-supply = <&vcc_sd_reg>; + }; + + regulators { + regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_host_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + gpio = <&gpio 178 0>; + }; + + vcc_sd_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 11b30db63ff2..54d6fce00a59 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x20000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -232,12 +244,10 @@ serial@70006000 { status = "okay"; - clock-frequency = <216000000>; }; serial@70006200 { status = "okay"; - clock-frequency = <216000000>; }; i2c@7000c000 { @@ -252,9 +262,9 @@ }; }; - i2c@7000c400 { + hdmi_ddc: i2c@7000c400 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; nvec { @@ -369,13 +379,13 @@ regulator-max-microvolt = <1800000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "+3.3vs_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 607bf0c6bf9c..37b3a57ec0f1 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -291,7 +303,6 @@ serial@70006300 { status = "okay"; - clock-frequency = <216000000>; }; i2c@7000c000 { @@ -345,7 +356,7 @@ pinctrl-1 = <&state_i2cmux_pta>; pinctrl-2 = <&state_i2cmux_idle>; - i2c@0 { + hdmi_ddc: i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -463,13 +474,13 @@ regulator-max-microvolt = <1800000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -604,6 +615,145 @@ }; }; + kbc { + status = "okay"; + nvidia,debounce-delay-ms = <32>; + nvidia,repeat-delay-ms = <160>; + nvidia,ghost-filter; + nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; + linux,keymap = <0x00020011 /* KEY_W */ + 0x0003001F /* KEY_S */ + 0x0004001E /* KEY_A */ + 0x0005002C /* KEY_Z */ + 0x000701d0 /* KEY_FN */ + + 0x0107007D /* KEY_LEFTMETA */ + 0x02060064 /* KEY_RIGHTALT */ + 0x02070038 /* KEY_LEFTALT */ + + 0x03000006 /* KEY_5 */ + 0x03010005 /* KEY_4 */ + 0x03020013 /* KEY_R */ + 0x03030012 /* KEY_E */ + 0x03040021 /* KEY_F */ + 0x03050020 /* KEY_D */ + 0x0306002D /* KEY_X */ + + 0x04000008 /* KEY_7 */ + 0x04010007 /* KEY_6 */ + 0x04020014 /* KEY_T */ + 0x04030023 /* KEY_H */ + 0x04040022 /* KEY_G */ + 0x0405002F /* KEY_V */ + 0x0406002E /* KEY_C */ + 0x04070039 /* KEY_SPACE */ + + 0x0500000A /* KEY_9 */ + 0x05010009 /* KEY_8 */ + 0x05020016 /* KEY_U */ + 0x05030015 /* KEY_Y */ + 0x05040024 /* KEY_J */ + 0x05050031 /* KEY_N */ + 0x05060030 /* KEY_B */ + 0x0507002B /* KEY_BACKSLASH */ + + 0x0600000C /* KEY_MINUS */ + 0x0601000B /* KEY_0 */ + 0x06020018 /* KEY_O */ + 0x06030017 /* KEY_I */ + 0x06040026 /* KEY_L */ + 0x06050025 /* KEY_K */ + 0x06060033 /* KEY_COMMA */ + 0x06070032 /* KEY_M */ + + 0x0701000D /* KEY_EQUAL */ + 0x0702001B /* KEY_RIGHTBRACE */ + 0x0703001C /* KEY_ENTER */ + 0x0707008B /* KEY_MENU */ + + 0x08040036 /* KEY_RIGHTSHIFT */ + 0x0805002A /* KEY_LEFTSHIFT */ + + 0x09050061 /* KEY_RIGHTCTRL */ + 0x0907001D /* KEY_LEFTCTRL */ + + 0x0B00001A /* KEY_LEFTBRACE */ + 0x0B010019 /* KEY_P */ + 0x0B020028 /* KEY_APOSTROPHE */ + 0x0B030027 /* KEY_SEMICOLON */ + 0x0B040035 /* KEY_SLASH */ + 0x0B050034 /* KEY_DOT */ + + 0x0C000044 /* KEY_F10 */ + 0x0C010043 /* KEY_F9 */ + 0x0C02000E /* KEY_BACKSPACE */ + 0x0C030004 /* KEY_3 */ + 0x0C040003 /* KEY_2 */ + 0x0C050067 /* KEY_UP */ + 0x0C0600D2 /* KEY_PRINT */ + 0x0C070077 /* KEY_PAUSE */ + + 0x0D00006E /* KEY_INSERT */ + 0x0D01006F /* KEY_DELETE */ + 0x0D030068 /* KEY_PAGEUP */ + 0x0D04006D /* KEY_PAGEDOWN */ + 0x0D05006A /* KEY_RIGHT */ + 0x0D06006C /* KEY_DOWN */ + 0x0D070069 /* KEY_LEFT */ + + 0x0E000057 /* KEY_F11 */ + 0x0E010058 /* KEY_F12 */ + 0x0E020042 /* KEY_F8 */ + 0x0E030010 /* KEY_Q */ + 0x0E04003E /* KEY_F4 */ + 0x0E05003D /* KEY_F3 */ + 0x0E060002 /* KEY_1 */ + 0x0E070041 /* KEY_F7 */ + + 0x0F000001 /* KEY_ESC */ + 0x0F010029 /* KEY_GRAVE */ + 0x0F02003F /* KEY_F5 */ + 0x0F03000F /* KEY_TAB */ + 0x0F04003B /* KEY_F1 */ + 0x0F05003C /* KEY_F2 */ + 0x0F06003A /* KEY_CAPSLOCK */ + 0x0F070040 /* KEY_F6 */ + + /* Software Handled Function Keys */ + 0x14000047 /* KEY_KP7 */ + + 0x15000049 /* KEY_KP9 */ + 0x15010048 /* KEY_KP8 */ + 0x1502004B /* KEY_KP4 */ + 0x1504004F /* KEY_KP1 */ + + 0x1601004E /* KEY_KPSLASH */ + 0x1602004D /* KEY_KP6 */ + 0x1603004C /* KEY_KP5 */ + 0x16040051 /* KEY_KP3 */ + 0x16050050 /* KEY_KP2 */ + 0x16070052 /* KEY_KP0 */ + + 0x1B010037 /* KEY_KPASTERISK */ + 0x1B03004A /* KEY_KPMINUS */ + 0x1B04004E /* KEY_KPPLUS */ + 0x1B050053 /* KEY_KPDOT */ + + 0x1C050073 /* KEY_VOLUMEUP */ + + 0x1D030066 /* KEY_HOME */ + 0x1D04006B /* KEY_END */ + 0x1D0500E0 /* KEY_BRIGHTNESSDOWN */ + 0x1D060072 /* KEY_VOLUMEDOWN */ + 0x1D0700E1 /* KEY_BRIGHTNESSUP */ + + 0x1E000045 /* KEY_NUMLOCK */ + 0x1E010046 /* KEY_SCROLLLOCK */ + 0x1E020071 /* KEY_MUTE */ + + 0x1F04008A>; /* KEY_HELP */ + }; regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index a239ccdfaa52..4766abae7a72 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -276,7 +276,6 @@ }; serial@70006300 { - clock-frequency = <216000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index e47cf6a58b6f..5d79e4fc49a6 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -249,6 +249,11 @@ "ld23_22"; nvidia,pull = <1>; }; + conf_spif { + nvidia,pins = "spif"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + }; }; }; @@ -258,7 +263,6 @@ serial@70006000 { status = "okay"; - clock-frequency = <216000000>; }; dvi_ddc: i2c@7000c000 { @@ -326,6 +330,11 @@ bus-width = <4>; }; + poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 191 1>; /* gpio PX7, active low */ + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index f6c61d10fd27..425c89000c20 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -3,13 +3,25 @@ /include/ "tegra20.dtsi" / { - model = "NVIDIA Tegra2 Ventana evaluation board"; + model = "NVIDIA Tegra20 Ventana evaluation board"; compatible = "nvidia,ventana", "nvidia,tegra20"; memory { reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -288,7 +300,6 @@ serial@70006300 { status = "okay"; - clock-frequency = <216000000>; }; i2c@7000c000 { @@ -320,7 +331,7 @@ i2c@7000c400 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; i2cmux { @@ -335,7 +346,7 @@ pinctrl-1 = <&state_i2cmux_pta>; pinctrl-2 = <&state_i2cmux_idle>; - i2c@0 { + hdmi_ddc: i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -446,13 +457,13 @@ regulator-max-microvolt = <1800000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 20d576ecd555..ea57c0f6dcce 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -3,7 +3,7 @@ /include/ "tegra20.dtsi" / { - model = "NVIDIA Tegra2 Whistler evaluation board"; + model = "NVIDIA Tegra20 Whistler evaluation board"; compatible = "nvidia,whistler", "nvidia,tegra20"; memory { @@ -255,7 +255,6 @@ serial@70006000 { status = "okay"; - clock-frequency = <216000000>; }; hdmi_ddc: i2c@7000c400 { @@ -520,6 +519,18 @@ bus-width = <8>; }; + kbc { + status = "okay"; + nvidia,debounce-delay-ms = <20>; + nvidia,repeat-delay-ms = <160>; + nvidia,kbc-row-pins = <0 1 2>; + nvidia,kbc-col-pins = <16 17>; + linux,keymap = <0x00000074 /* KEY_POWER */ + 0x01000066 /* KEY_HOME */ + 0x0101009E /* KEY_BACK */ + 0x0201008B>; /* KEY_MENU */ + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 2e7c83c7253b..9a428931d042 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,14 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + aliases { + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + serial4 = &uarte; + }; + host1x { compatible = "nvidia,tegra20-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; @@ -112,15 +120,6 @@ interrupts = <1 13 0x304>; }; - cache-controller@50043000 { - compatible = "arm,pl310-cache"; - reg = <0x50043000 0x1000>; - arm,data-latency = <5 5 2>; - arm,tag-latency = <4 4 2>; - cache-unified; - cache-level = <2>; - }; - intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 @@ -129,6 +128,15 @@ #interrupt-cells = <3>; }; + cache-controller { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <5 5 2>; + arm,tag-latency = <4 4 2>; + cache-unified; + cache-level = <2>; + }; + timer@60005000 { compatible = "nvidia,tegra20-timer"; reg = <0x60005000 0x60>; @@ -199,6 +207,15 @@ compatible = "nvidia,tegra20-das"; reg = <0x70000c00 0x80>; }; + + tegra_ac97: ac97 { + compatible = "nvidia,tegra20-ac97"; + reg = <0x70002000 0x200>; + interrupts = <0 81 0x04>; + nvidia,dma-request-selector = <&apbdma 12>; + clocks = <&tegra_car 3>; + status = "disabled"; + }; tegra_i2s1: i2s@70002800 { compatible = "nvidia,tegra20-i2s"; @@ -218,47 +235,59 @@ status = "disabled"; }; - serial@70006000 { + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra20-uart" and to enable the APB DMA based serial + * driver, the comptible is "nvidia,tegra20-hsuart". + */ + uarta: serial@70006000 { compatible = "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; + nvidia,dma-request-selector = <&apbdma 8>; clocks = <&tegra_car 6>; status = "disabled"; }; - serial@70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; + nvidia,dma-request-selector = <&apbdma 9>; clocks = <&tegra_car 96>; status = "disabled"; }; - serial@70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; + nvidia,dma-request-selector = <&apbdma 10>; clocks = <&tegra_car 55>; status = "disabled"; }; - serial@70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; + nvidia,dma-request-selector = <&apbdma 19>; clocks = <&tegra_car 65>; status = "disabled"; }; - serial@70006400 { + uarte: serial@70006400 { compatible = "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; + nvidia,dma-request-selector = <&apbdma 20>; clocks = <&tegra_car 66>; status = "disabled"; }; @@ -375,6 +404,14 @@ status = "disabled"; }; + kbc { + compatible = "nvidia,tegra20-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; + status = "disabled"; + }; + pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; @@ -387,7 +424,7 @@ interrupts = <0 77 0x04>; }; - gart { + iommu { compatible = "nvidia,tegra20-gart"; reg = <0x7000f024 0x00000018 /* controller registers */ 0x58000000 0x02000000>; /* GART aperture */ diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts new file mode 100644 index 000000000000..8ff2ff20e4a3 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -0,0 +1,373 @@ +/dts-v1/; + +/include/ "tegra30.dtsi" + +/ { + model = "NVIDIA Tegra30 Beaver evaluation board"; + compatible = "nvidia,beaver", "nvidia,tegra30"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <0>; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = <1>; + nvidia,slew-rate-falling = <1>; + }; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + tps62361 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <0 86 0x4>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_5v_in_reg>; + vcc2-supply = <&vdd_5v_in_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&vdd_5v_in_reg>; + vcc5-supply = <&vdd_5v_in_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_5v_in_reg>; + vccio-supply = <&vdd_5v_in_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: vdd2 { + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7_reg: ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@1 { + compatible = "winbond,w25q32"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + + ahub { + i2s@70080400 { + status = "okay"; + }; + }; + + pmc { + status = "okay"; + nvidia,invert-interrupt; + }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v_in_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v_in"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + chargepump_5v_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "chargepump_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + }; + + ddr_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 0>; /* PMIC TPS65911 GPIO7 */ + vin-supply = <&vdd_5v_in_reg>; + }; + + vdd_5v_sata_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_5v_sata"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 30 0>; /* gpio PD6 */ + vin-supply = <&vdd_5v_in_reg>; + }; + + usb1_vbus_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio-open-drain; + vin-supply = <&vdd_5v_in_reg>; + }; + + usb3_vbus_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio-open-drain; + vin-supply = <&vdd_5v_in_reg>; + }; + + sys_3v3_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "sys_3v3,vdd_3v3_alw"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 0>; /* PMIC TPS65911 GPIO6 */ + vin-supply = <&vdd_5v_in_reg>; + }; + + sys_3v3_pexs_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "sys_3v3_pexs"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 95 0>; /* gpio PL7 */ + vin-supply = <&sys_3v3_reg>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index bdb2a660f376..17499272a4ef 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -106,12 +106,25 @@ nvidia,slew-rate-rising = <1>; nvidia,slew-rate-falling = <1>; }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6", + "uart3_cts_n_pa1", + "uart3_rts_n_pc0", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; }; }; serial@70006000 { status = "okay"; - clock-frequency = <408000000>; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; }; i2c@7000c000 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2de8b919d78c..767803e1fd55 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,14 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + aliases { + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + serial4 = &uarte; + }; + host1x { compatible = "nvidia,tegra30-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; @@ -113,15 +121,6 @@ interrupts = <1 13 0xf04>; }; - cache-controller@50043000 { - compatible = "arm,pl310-cache"; - reg = <0x50043000 0x1000>; - arm,data-latency = <6 6 2>; - arm,tag-latency = <5 5 2>; - cache-unified; - cache-level = <2>; - }; - intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 @@ -130,6 +129,15 @@ #interrupt-cells = <3>; }; + cache-controller { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <6 6 2>; + arm,tag-latency = <5 5 2>; + cache-unified; + cache-level = <2>; + }; + timer@60005000 { compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; @@ -191,7 +199,7 @@ }; gpio: gpio { - compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio"; + compatible = "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; interrupts = <0 32 0x04 0 33 0x04 @@ -213,47 +221,60 @@ 0x70003000 0x3e4>; /* Mux registers */ }; - serial@70006000 { + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the comptible is + * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart". + */ + uarta: serial@70006000 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; + nvidia,dma-request-selector = <&apbdma 8>; clocks = <&tegra_car 6>; status = "disabled"; }; - serial@70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; + nvidia,dma-request-selector = <&apbdma 9>; clocks = <&tegra_car 160>; status = "disabled"; }; - serial@70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; + nvidia,dma-request-selector = <&apbdma 10>; clocks = <&tegra_car 55>; status = "disabled"; }; - serial@70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; + nvidia,dma-request-selector = <&apbdma 19>; clocks = <&tegra_car 65>; status = "disabled"; }; - serial@70006400 { + uarte: serial@70006400 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; + nvidia,dma-request-selector = <&apbdma 20>; clocks = <&tegra_car 66>; status = "disabled"; }; @@ -392,6 +413,14 @@ status = "disabled"; }; + kbc { + compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; + status = "disabled"; + }; + pmc { compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; @@ -406,7 +435,7 @@ interrupts = <0 77 0x04>; }; - smmu { + iommu { compatible = "nvidia,tegra30-smmu"; reg = <0x7000f010 0x02c 0x7000f1f0 0x010 diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 6b36a5ae03c2..9aaad36a1728 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -84,6 +84,7 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y +CONFIG_PINCTRL_SINGLE=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_REGULATOR=y diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 7aeb473ee539..9706c000f294 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -210,6 +210,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk), CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffb4000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID("emac_clk", "fffbc000.ethernet", ðer_clk), CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 0153950f6068..a075b3e0c5c7 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -62,6 +62,7 @@ config MACH_DA8XX_DT bool "Support DA8XX platforms using device tree" default y depends on ARCH_DAVINCI_DA8XX + select PINCTRL help Say y here to include support for TI DaVinci DA850 based using Flattened Device Tree. More information at Documentation/devicetree diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 9a7c76efc8f8..6b7a0a27fbd1 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -37,11 +37,18 @@ static void __init da8xx_init_irq(void) of_irq_init(da8xx_irq_match); } +struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), + OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL), + {} +}; + #ifdef CONFIG_ARCH_DAVINCI_DA850 static void __init da850_init_machine(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, + da850_auxdata_lookup, NULL); da8xx_uart_clk_enable(); } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index aa402bc160c8..fc50243b1481 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -359,7 +359,7 @@ static struct resource da8xx_watchdog_resources[] = { }, }; -struct platform_device da8xx_wdt_device = { +static struct platform_device da8xx_wdt_device = { .name = "watchdog", .id = -1, .num_resources = ARRAY_SIZE(da8xx_watchdog_resources), @@ -368,7 +368,15 @@ struct platform_device da8xx_wdt_device = { void da8xx_restart(char mode, const char *cmd) { - davinci_watchdog_reset(&da8xx_wdt_device); + struct device *dev; + + dev = bus_find_device_by_name(&platform_bus_type, NULL, "watchdog"); + if (!dev) { + pr_err("%s: failed to find watchdog device\n", __func__); + return; + } + + davinci_watchdog_reset(to_platform_device(dev)); } int __init da8xx_register_watchdog(void) diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 1b14aea40310..de439b7b9af1 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -110,7 +110,6 @@ extern struct emac_platform_data da8xx_emac_pdata; extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata; extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata; -extern struct platform_device da8xx_wdt_device; extern const short da830_emif25_pins[]; extern const short da830_spi0_pins[]; diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 5fad7cefe8aa..052186713347 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -119,6 +119,23 @@ static struct fb_videomode apf28dev_video_modes[] = { }, }; +static struct fb_videomode cfa10049_video_modes[] = { + { + .name = "Himax HX8357-B", + .refresh = 60, + .xres = 320, + .yres = 480, + .pixclock = 108506, /* picosecond (9.216 MHz) */ + .left_margin = 2, + .right_margin = 2, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 15, + .vsync_len = 15, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT + }, +}; + static struct mxsfb_platform_data mxsfb_pdata __initdata; /* @@ -387,6 +404,17 @@ static void __init cfa10049_init(void) update_fec_mac_prop(OUI_CRYSTALFONTZ); } +static void __init cfa10037_init(void) +{ + enable_clk_enet_out(); + update_fec_mac_prop(OUI_CRYSTALFONTZ); + + mxsfb_pdata.mode_list = cfa10049_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; +} + static void __init apf28_init(void) { enable_clk_enet_out(); @@ -407,6 +435,8 @@ static void __init mxs_machine_init(void) m28evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); + else if (of_machine_is_compatible("crystalfontz,cfa10037")) + cfa10037_init(); else if (of_machine_is_compatible("crystalfontz,cfa10049")) cfa10049_init(); else if (of_machine_is_compatible("armadeus,imx28-apf28")) diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 706dc5727bbe..82226a5d60ef 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -4,19 +4,13 @@ menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" - select CLKSRC_NOMADIK_MTU select NOMADIK_8815 + select I2C + select I2C_ALGOBIT endmenu config NOMADIK_8815 bool -config I2C_BITBANG_8815NHK - tristate "Driver for bit-bang busses found on the 8815 NHK" - depends on I2C && MACH_NOMADIK_8815NHK - depends on PINCTRL_NOMADIK - default y - select I2C_ALGOBIT - endif diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index a42c9a33d3bf..1071c3b04d1a 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -9,9 +9,3 @@ # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o - -# Specific board support -obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o - -# Nomadik extra devices -obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c deleted file mode 100644 index aaed48d94374..000000000000 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ /dev/null @@ -1,353 +0,0 @@ -/* - * linux/arch/arm/mach-nomadik/board-8815nhk.c - * - * Copyright (C) STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * - * NHK15 board specifc driver definition - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/amba/mmci.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/fsmc.h> -#include <linux/mtd/onenand.h> -#include <linux/mtd/partitions.h> -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_data/pinctrl-nomadik.h> -#include <linux/platform_data/clocksource-nomadik-mtu.h> -#include <asm/sizes.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> -#include <asm/mach/time.h> -#include <mach/irqs.h> - -#include "cpu-8815.h" - -/* Initial value for SRC control register: all timers use MXTAL/8 source */ -#define SRC_CR_INIT_MASK 0x00007fff -#define SRC_CR_INIT_VAL 0x2aaa8000 - -#define ALE_OFF 0x1000000 -#define CLE_OFF 0x800000 - -/* These addresses span 16MB, so use three individual pages */ -static struct resource nhk8815_nand_resources[] = { - { - .name = "nand_data", - .start = 0x40000000, - .end = 0x40000000 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "nand_addr", - .start = 0x40000000 + ALE_OFF, - .end = 0x40000000 +ALE_OFF + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "nand_cmd", - .start = 0x40000000 + CLE_OFF, - .end = 0x40000000 + CLE_OFF + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "fsmc_regs", - .start = NOMADIK_FSMC_BASE, - .end = NOMADIK_FSMC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -/* - * These partitions are the same as those used in the 2.6.20 release - * shipped by the vendor; the first two partitions are mandated - * by the boot ROM, and the bootloader area is somehow oversized... - */ -static struct mtd_partition nhk8815_partitions[] = { - { - .name = "X-Loader(NAND)", - .offset = 0, - .size = SZ_256K, - }, { - .name = "MemInit(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K, - }, { - .name = "BootLoader(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - }, { - .name = "Kernel zImage(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = 3 * SZ_1M, - }, { - .name = "Root Filesystem(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = 22 * SZ_1M, - }, { - .name = "User Filesystem(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct fsmc_nand_timings nhk8815_nand_timings = { - .thiz = 0, - .thold = 0x10, - .twait = 0x0A, - .tset = 0, -}; - -static struct fsmc_nand_platform_data nhk8815_nand_platform_data = { - .nand_timings = &nhk8815_nand_timings, - .partitions = nhk8815_partitions, - .nr_partitions = ARRAY_SIZE(nhk8815_partitions), - .width = FSMC_NAND_BW8, -}; - -static struct platform_device nhk8815_nand_device = { - .name = "fsmc-nand", - .id = -1, - .resource = nhk8815_nand_resources, - .num_resources = ARRAY_SIZE(nhk8815_nand_resources), - .dev = { - .platform_data = &nhk8815_nand_platform_data, - }, -}; - -/* These are the partitions for the OneNand device, different from above */ -static struct mtd_partition nhk8815_onenand_partitions[] = { - { - .name = "X-Loader(OneNAND)", - .offset = 0, - .size = SZ_256K, - }, { - .name = "MemInit(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K, - }, { - .name = "BootLoader(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M-SZ_256K, - }, { - .name = "SysImage(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = 4 * SZ_1M, - }, { - .name = "Root Filesystem(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = 22 * SZ_1M, - }, { - .name = "User Filesystem(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct onenand_platform_data nhk8815_onenand_data = { - .parts = nhk8815_onenand_partitions, - .nr_parts = ARRAY_SIZE(nhk8815_onenand_partitions), -}; - -static struct resource nhk8815_onenand_resource[] = { - { - .start = 0x30000000, - .end = 0x30000000 + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nhk8815_onenand_device = { - .name = "onenand-flash", - .id = -1, - .dev = { - .platform_data = &nhk8815_onenand_data, - }, - .resource = nhk8815_onenand_resource, - .num_resources = ARRAY_SIZE(nhk8815_onenand_resource), -}; - -/* bus control reg. and bus timing reg. for CS0..CS3 */ -#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3)) -#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04) - -static void __init nhk8815_onenand_init(void) -{ -#ifdef CONFIG_MTD_ONENAND - /* Set up SMCS0 for OneNand */ - writel(0x000030db, FSMC_BCR(0)); - writel(0x02100551, FSMC_BTR(0)); -#endif -} - -static struct mmci_platform_data mmcsd_plat_data = { - .ocr_mask = MMC_VDD_29_30, - .f_max = 48000000, - .gpio_wp = -1, - .gpio_cd = 111, - .cd_invert = true, - .capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA, -}; - -static int __init nhk8815_mmcsd_init(void) -{ - int ret; - - ret = gpio_request(112, "card detect bias"); - if (ret) - return ret; - gpio_direction_output(112, 0); - amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180); - return 0; -} -module_init(nhk8815_mmcsd_init); - -static struct resource nhk8815_eth_resources[] = { - { - .name = "smc91x-regs", - .start = 0x34000000 + 0x300, - .end = 0x34000000 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = NOMADIK_GPIO_TO_IRQ(115), - .end = NOMADIK_GPIO_TO_IRQ(115), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, - } -}; - -static struct platform_device nhk8815_eth_device = { - .name = "smc91x", - .resource = nhk8815_eth_resources, - .num_resources = ARRAY_SIZE(nhk8815_eth_resources), -}; - -static int __init nhk8815_eth_init(void) -{ - int gpio_nr = 115; /* hardwired in the board */ - int err; - - err = gpio_request(gpio_nr, "eth_irq"); - if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO); - if (!err) err = gpio_direction_input(gpio_nr); - if (err) - pr_err("Error %i in %s\n", err, __func__); - return err; -} -device_initcall(nhk8815_eth_init); - -static struct platform_device *nhk8815_platform_devices[] __initdata = { - &nhk8815_nand_device, - &nhk8815_onenand_device, - &nhk8815_eth_device, - /* will add more devices */ -}; - -static void __init nomadik_timer_init(void) -{ - u32 src_cr; - - /* Configure timer sources in "system reset controller" ctrl reg */ - src_cr = readl(io_p2v(NOMADIK_SRC_BASE)); - src_cr &= SRC_CR_INIT_MASK; - src_cr |= SRC_CR_INIT_VAL; - writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); - - nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0); -} - -static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = { - { - I2C_BOARD_INFO("stw4811", 0x2d), - }, -}; - -static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = { - { - I2C_BOARD_INFO("camera", 0x10), - }, - { - I2C_BOARD_INFO("stw5095", 0x1a), - }, - { - I2C_BOARD_INFO("lis3lv02dl", 0x1d), - }, -}; - -static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = { - { - I2C_BOARD_INFO("stw4811-usb", 0x2d), - }, -}; - -static unsigned long out_low[] = { PIN_OUTPUT_LOW }; -static unsigned long out_high[] = { PIN_OUTPUT_HIGH }; -static unsigned long in_nopull[] = { PIN_INPUT_NOPULL }; -static unsigned long in_pullup[] = { PIN_INPUT_PULLUP }; - -static struct pinctrl_map __initdata nhk8815_pinmap[] = { - PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"), - PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"), - /* Hog in MMC/SD card mux */ - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"), - /* MCCLK */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low), - /* MCCMD */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup), - /* MCCMDDIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high), - /* MCDAT3-0 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup), - /* MCDAT0DIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high), - /* MCDAT31DIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high), - /* MCMSFBCLK */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup), - /* CD input GPIO */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull), - /* CD bias drive */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low), -}; - -static void __init nhk8815_platform_init(void) -{ - pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap)); - cpu8815_platform_init(); - nhk8815_onenand_init(); - platform_add_devices(nhk8815_platform_devices, - ARRAY_SIZE(nhk8815_platform_devices)); - - amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0); - amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0); - - i2c_register_board_info(0, nhk8815_i2c0_devices, - ARRAY_SIZE(nhk8815_i2c0_devices)); - i2c_register_board_info(1, nhk8815_i2c1_devices, - ARRAY_SIZE(nhk8815_i2c1_devices)); - i2c_register_board_info(2, nhk8815_i2c2_devices, - ARRAY_SIZE(nhk8815_i2c2_devices)); -} - -MACHINE_START(NOMADIK, "NHK8815") - /* Maintainer: ST MicroElectronics */ - .atag_offset = 0x100, - .map_io = cpu8815_map_io, - .init_irq = cpu8815_init_irq, - .init_time = nomadik_timer_init, - .init_machine = nhk8815_platform_init, - .restart = cpu8815_restart, -MACHINE_END diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 351404673f6c..21c1aa512640 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -25,138 +25,308 @@ #include <linux/slab.h> #include <linux/irq.h> #include <linux/dma-mapping.h> -#include <linux/irqchip/arm-vic.h> +#include <linux/irqchip.h> #include <linux/platform_data/clk-nomadik.h> #include <linux/platform_data/pinctrl-nomadik.h> +#include <linux/pinctrl/machine.h> +#include <linux/platform_data/clocksource-nomadik-mtu.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/mtd/fsmc.h> +#include <linux/gpio.h> +#include <linux/amba/mmci.h> -#include <mach/hardware.h> #include <mach/irqs.h> +#include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> -#include "cpu-8815.h" +/* + * These are the only hard-coded address offsets we still have to use. + */ +#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */ +#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */ +#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ +#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */ +#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */ +#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */ +#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */ +#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */ +#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */ +#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */ +#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */ +#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */ +#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */ +#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */ +#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */ +#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */ +#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */ +#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */ +#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */ +#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */ +#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */ +#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ +#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */ +#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */ +#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */ +#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */ +#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */ +#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */ +#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */ +#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */ +#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */ +#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ +#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ +#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */ +#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */ +#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */ +#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */ +#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */ +#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */ +#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ +#define NOMADIK_UART1_VBASE 0xF01FB000 -/* The 8815 has 4 GPIO blocks, let's register them immediately */ -static resource_size_t __initdata cpu8815_gpio_base[] = { - NOMADIK_GPIO0_BASE, - NOMADIK_GPIO1_BASE, - NOMADIK_GPIO2_BASE, - NOMADIK_GPIO3_BASE, +static unsigned long out_low[] = { PIN_OUTPUT_LOW }; +static unsigned long out_high[] = { PIN_OUTPUT_HIGH }; +static unsigned long in_nopull[] = { PIN_INPUT_NOPULL }; +static unsigned long in_pullup[] = { PIN_INPUT_PULLUP }; + +static struct pinctrl_map __initdata nhk8815_pinmap[] = { + PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"), + PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"), + /* Hog in MMC/SD card mux */ + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"), + /* MCCLK */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low), + /* MCCMD */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup), + /* MCCMDDIR */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high), + /* MCDAT3-0 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup), + /* MCDAT0DIR */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high), + /* MCDAT31DIR */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high), + /* MCMSFBCLK */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup), + /* CD input GPIO */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull), + /* CD bias drive */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low), + /* I2C0 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup), + /* I2C1 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup), + /* I2C2 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup), }; -static struct platform_device * -cpu8815_add_gpio(int id, resource_size_t addr, int irq, - struct nmk_gpio_platform_data *pdata) +/* This is needed for LL-debug/earlyprintk/debug-macro.S */ +static struct map_desc cpu8815_io_desc[] __initdata = { + { + .virtual = NOMADIK_UART1_VBASE, + .pfn = __phys_to_pfn(NOMADIK_UART1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init cpu8815_map_io(void) { - struct resource resources[] = { - { - .start = addr, - .end = addr + 127, - .flags = IORESOURCE_MEM, - }, - { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - } - }; - - return platform_device_register_resndata(NULL, "gpio", id, - resources, ARRAY_SIZE(resources), - pdata, sizeof(*pdata)); + iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc)); } -void cpu8815_add_gpios(resource_size_t *base, int num, int irq, - struct nmk_gpio_platform_data *pdata) +static void cpu8815_restart(char mode, const char *cmd) { - int first = 0; - int i; + void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K); - for (i = 0; i < num; i++, first += 32, irq++) { - pdata->first_gpio = first; - pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); - pdata->num_gpio = 32; + /* FIXME: use egpio when implemented */ - cpu8815_add_gpio(i, base[i], irq, pdata); - } + /* Write anything to Reset status register */ + writel(1, srcbase + 0x18); } -static inline void -cpu8815_add_pinctrl(struct device *parent, const char *name) +/* Initial value for SRC control register: all timers use MXTAL/8 source */ +#define SRC_CR_INIT_MASK 0x00007fff +#define SRC_CR_INIT_VAL 0x2aaa8000 + +static void __init cpu8815_timer_init_of(void) { - struct platform_device_info pdevinfo = { - .parent = parent, - .name = name, - .id = -1, - }; + struct device_node *mtu; + void __iomem *base; + int irq; + u32 src_cr; + + /* We need this to be up now */ + nomadik_clk_init(); + + mtu = of_find_node_by_path("/mtu0"); + if (!mtu) + return; + base = of_iomap(mtu, 0); + if (WARN_ON(!base)) + return; + irq = irq_of_parse_and_map(mtu, 0); - platform_device_register_full(&pdevinfo); + pr_info("Remapped MTU @ %p, irq: %d\n", base, irq); + + /* Configure timer sources in "system reset controller" ctrl reg */ + src_cr = readl(base); + src_cr &= SRC_CR_INIT_MASK; + src_cr |= SRC_CR_INIT_VAL; + writel(src_cr, base); + + nmdk_timer_init(base, irq); } -static int __init cpu8815_init(void) +static struct fsmc_nand_timings cpu8815_nand_timings = { + .thiz = 0, + .thold = 0x10, + .twait = 0x0A, + .tset = 0, +}; + +static struct fsmc_nand_platform_data cpu8815_nand_data = { + .nand_timings = &cpu8815_nand_timings, +}; + +/* + * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects + * to simply request an IRQ passed as a resource. So the GPIO pin needs + * to be requested by this hog and set as input. + */ +static int __init cpu8815_eth_init(void) { - struct nmk_gpio_platform_data pdata = { - /* No custom data yet */ - }; - - cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base), - IRQ_GPIO0, &pdata); - cpu8815_add_pinctrl(NULL, "pinctrl-stn8815"); - amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0); - amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0); + struct device_node *eth; + int gpio, irq, err; + + eth = of_find_node_by_path("/usb-s8815/ethernet-gpio"); + if (!eth) { + pr_info("could not find any ethernet GPIO\n"); + return 0; + } + gpio = of_get_gpio(eth, 0); + err = gpio_request(gpio, "eth_irq"); + if (err) { + pr_info("failed to request ethernet GPIO\n"); + return -ENODEV; + } + err = gpio_direction_input(gpio); + if (err) { + pr_info("failed to set ethernet GPIO as input\n"); + return -ENODEV; + } + irq = gpio_to_irq(gpio); + pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq); return 0; } -arch_initcall(cpu8815_init); +device_initcall(cpu8815_eth_init); -/* All SoC devices live in the same area (see hardware.h) */ -static struct map_desc nomadik_io_desc[] __initdata = { - { - .virtual = NOMADIK_IO_VIRTUAL, - .pfn = __phys_to_pfn(NOMADIK_IO_PHYSICAL), - .length = NOMADIK_IO_SIZE, - .type = MT_DEVICE, - } - /* static ram and secured ram may be added later */ +/* + * TODO: + * cannot be set from device tree, convert to a proper DT + * binding. + */ +static struct mmci_platform_data mmcsd_plat_data = { + .ocr_mask = MMC_VDD_29_30, }; -void __init cpu8815_map_io(void) +/* + * This GPIO pin turns on a line that is used to detect card insertion + * on this board. + */ +static int __init cpu8815_mmcsd_init(void) { - iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc)); -} + struct device_node *cdbias; + int gpio, err; -void __init cpu8815_init_irq(void) -{ - /* This modified VIC cell has two register blocks, at 0 and 0x20 */ - vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0); - vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0); - - /* - * Init clocks here so that they are available for system timer - * initialization. - */ - nomadik_clk_init(); + cdbias = of_find_node_by_path("/usb-s8815/mmcsd-gpio"); + if (!cdbias) { + pr_info("could not find MMC/SD card detect bias node\n"); + return 0; + } + gpio = of_get_gpio(cdbias, 0); + if (gpio < 0) { + pr_info("could not obtain MMC/SD card detect bias GPIO\n"); + return 0; + } + err = gpio_request(gpio, "card detect bias"); + if (err) { + pr_info("failed to request card detect bias GPIO %d\n", gpio); + return -ENODEV; + } + err = gpio_direction_output(gpio, 0); + if (err){ + pr_info("failed to set GPIO %d as output, low\n", gpio); + return err; + } + pr_info("enabled USB-S8815 CD bias GPIO %d, low\n", gpio); + return 0; } +device_initcall(cpu8815_mmcsd_init); -/* - * This function is called from the board init ("init_machine"). - */ - void __init cpu8815_platform_init(void) + +/* These are mostly to get the right device names for the clock lookups */ +static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE, + "gpio.0", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE, + "gpio.1", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE, + "gpio.2", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE, + "gpio.3", NULL), + OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0, + "pinctrl-stn8815", NULL), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE, + "uart0", NULL), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE, + "uart1", NULL), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE, + "rng", NULL), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE, + "rtc-pl031", NULL), + OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE, + "fsmc-nand", &cpu8815_nand_data), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE, + "mmci", &mmcsd_plat_data), + { /* sentinel */ }, +}; + +static void __init cpu8815_init_of(void) { #ifdef CONFIG_CACHE_L2X0 /* At full speed latency must be >=2, so 0x249 in low bits */ - l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff); + l2x0_of_init(0x00730249, 0xfe000fff); #endif - return; + pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap)); + of_platform_populate(NULL, of_default_bus_match_table, + cpu8815_auxdata_lookup, NULL); } -void cpu8815_restart(char mode, const char *cmd) -{ - void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18); - - /* FIXME: use egpio when implemented */ +static const char * cpu8815_board_compat[] = { + "calaosystems,usb-s8815", + NULL, +}; - /* Write anything to Reset status register */ - writel(1, src_rstsr); -} +DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") + .map_io = cpu8815_map_io, + .init_irq = irqchip_init, + .init_time = cpu8815_timer_init_of, + .init_machine = cpu8815_init_of, + .restart = cpu8815_restart, + .dt_compat = cpu8815_board_compat, +MACHINE_END diff --git a/arch/arm/mach-nomadik/cpu-8815.h b/arch/arm/mach-nomadik/cpu-8815.h deleted file mode 100644 index 71c21e8a11dc..000000000000 --- a/arch/arm/mach-nomadik/cpu-8815.h +++ /dev/null @@ -1,4 +0,0 @@ -extern void cpu8815_map_io(void); -extern void cpu8815_platform_init(void); -extern void cpu8815_init_irq(void); -extern void cpu8815_restart(char, const char *); diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c deleted file mode 100644 index 0c2f6628299a..000000000000 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ /dev/null @@ -1,88 +0,0 @@ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_device.h> -#include <linux/platform_data/pinctrl-nomadik.h> - -/* - * There are two busses in the 8815NHK. - * They could, in theory, be driven by the hardware component, but we - * use bit-bang through GPIO by now, to keep things simple - */ - -/* I2C0 connected to the STw4811 power management chip */ -static struct i2c_gpio_platform_data nhk8815_i2c_data0 = { - /* keep defaults for timeouts; pins are push-pull bidirectional */ - .scl_pin = 62, - .sda_pin = 63, -}; - -/* I2C1 connected to various sensors */ -static struct i2c_gpio_platform_data nhk8815_i2c_data1 = { - /* keep defaults for timeouts; pins are push-pull bidirectional */ - .scl_pin = 53, - .sda_pin = 54, -}; - -/* I2C2 connected to the USB portions of the STw4811 only */ -static struct i2c_gpio_platform_data nhk8815_i2c_data2 = { - /* keep defaults for timeouts; pins are push-pull bidirectional */ - .scl_pin = 73, - .sda_pin = 74, -}; - -static struct platform_device nhk8815_i2c_dev0 = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &nhk8815_i2c_data0, - }, -}; - -static struct platform_device nhk8815_i2c_dev1 = { - .name = "i2c-gpio", - .id = 1, - .dev = { - .platform_data = &nhk8815_i2c_data1, - }, -}; - -static struct platform_device nhk8815_i2c_dev2 = { - .name = "i2c-gpio", - .id = 2, - .dev = { - .platform_data = &nhk8815_i2c_data2, - }, -}; - -static pin_cfg_t cpu8815_pins_i2c[] = { - PIN_CFG_INPUT(62, GPIO, PULLUP), - PIN_CFG_INPUT(63, GPIO, PULLUP), - PIN_CFG_INPUT(53, GPIO, PULLUP), - PIN_CFG_INPUT(54, GPIO, PULLUP), - PIN_CFG_INPUT(73, GPIO, PULLUP), - PIN_CFG_INPUT(74, GPIO, PULLUP), -}; - -static int __init nhk8815_i2c_init(void) -{ - nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c)); - platform_device_register(&nhk8815_i2c_dev0); - platform_device_register(&nhk8815_i2c_dev1); - platform_device_register(&nhk8815_i2c_dev2); - - return 0; -} - -static void __exit nhk8815_i2c_exit(void) -{ - platform_device_unregister(&nhk8815_i2c_dev0); - platform_device_unregister(&nhk8815_i2c_dev1); - platform_device_unregister(&nhk8815_i2c_dev2); - return; -} - -module_init(nhk8815_i2c_init); -module_exit(nhk8815_i2c_exit); diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h deleted file mode 100644 index 02035e459f50..000000000000 --- a/arch/arm/mach-nomadik/include/mach/hardware.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file contains the hardware definitions of the Nomadik. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * YOU should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */ -#define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */ -#define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */ -#define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */ - -/* used in C code, so cast to proper type */ -#define io_p2v(x) ((void __iomem *)(x) \ - - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL) -#define io_v2p(x) ((unsigned long)(x) \ - - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL) - -/* used in asm code, so no casts */ -#define IO_ADDRESS(x) IOMEM((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL) - -/* - * Base address defination for Nomadik Onchip Logic Block - */ -#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */ -#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */ -#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ -#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */ -#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */ -#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */ -#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */ -#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */ -#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */ -#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */ -#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */ -#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */ -#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */ -#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */ -#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */ -#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */ -#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */ -#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */ -#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */ -#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */ -#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */ -#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ -#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */ -#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */ -#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */ -#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */ -#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */ -#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */ -#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */ -#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */ -#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */ -#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ -#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ -#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */ -#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */ -#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */ -#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */ -#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */ -#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */ -#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ - -/* Other ranges, not for p2v/v2p */ -#define NOMADIK_BACKUP_RAM 0x80010000 -#define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */ -#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */ -#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */ -#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */ - -#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE) -#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE) -#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE) - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h index 215f8cdb4004..90ac965a92fe 100644 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ b/arch/arm/mach-nomadik/include/mach/irqs.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H -#include <mach/hardware.h> - #define IRQ_VIC_START 32 /* first VIC interrupt is 1 */ /* diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h index f527af6527c8..106fccca2021 100644 --- a/arch/arm/mach-nomadik/include/mach/uncompress.h +++ b/arch/arm/mach-nomadik/include/mach/uncompress.h @@ -21,7 +21,6 @@ #include <asm/setup.h> #include <asm/io.h> -#include <mach/hardware.h> /* we need the constants in amba/serial.h, but it refers to amba_device */ struct amba_device; |