Merge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson

* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  mach-ux500: voltage domain regulators for DB8500
  cpufreq: make DB8500 cpufreq driver compile
  cpufreq: update DB8500 cpufreq driver
  mach-ux500: move CPUfreq driver to cpufreq subsystem
  mfd: add DB5500 PRCMU driver
  mfd: update DB8500 PRCMU driver
  mach-ux500: move the DB8500 PRCMU driver to MFD
  mach-ux500: make PRCMU base address dynamic
  mach-ux500: rename PRCMU driver per SoC
  mach-ux500: update ASIC version detection
  mach-ux500: update SoC and board IRQ handling
  mach-ux500: update the DB5500 register file
  mach-ux500: update the DB8500 register file

19 files changed, 218 insertions, 795 deletions

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 58626013aa32..54429d015954 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -12,9 +12,12 @@ menu "Ux500 SoC"
 
 config UX500_SOC_DB5500
 	bool "DB5500"
+	select MFD_DB5500_PRCMU
 
 config UX500_SOC_DB8500
 	bool "DB8500"
+	select MFD_DB8500_PRCMU
+	select REGULATOR_DB8500_PRCMU
 
 endmenu
 
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index b549a8fb4231..1694916e6822 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,7 +5,7 @@
 obj-y				:= clock.o cpu.o devices.o devices-common.o \
 				   id.o usb.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
 				board-mop500-uib.o board-mop500-stuib.o \
@@ -17,4 +17,4 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
 obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem-irq-db5500.o
 obj-$(CONFIG_U5500_MBOX)	+= mbox-db5500.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
+
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index c9dc2eff3cb2..c01bc19e3c5e 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -188,6 +188,8 @@ void __init u5500_map_io(void)
 	ux500_map_io();
 
 	iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
+
+	_PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
 }
 
 static int usb_db5500_rx_dma_cfg[] = {
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 516126cb357d..c3c417656bd9 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -87,6 +87,8 @@ void __init u8500_map_io(void)
 		iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc));
 	else if (cpu_is_u8500v2())
 		iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
+
+	_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
 }
 
 static struct resource db8500_pmu_resources[] = {
@@ -129,9 +131,14 @@ static struct platform_device db8500_pmu_device = {
 	.dev.platform_data	= &db8500_pmu_platdata,
 };
 
+static struct platform_device db8500_prcmu_device = {
+	.name			= "db8500-prcmu",
+};
+
 static struct platform_device *platform_devs[] __initdata = {
 	&u8500_dma40_device,
 	&db8500_pmu_device,
+	&db8500_prcmu_device,
 };
 
 static resource_size_t __initdata db8500_gpio_base[] = {
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 5a43107c6232..1da23bb87c16 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -8,6 +8,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/db5500-prcmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -19,10 +21,11 @@
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <mach/prcmu.h>
 
 #include "clock.h"
 
+void __iomem *_PRCMU_BASE;
+
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2x0_base;
 #endif
@@ -47,6 +50,8 @@ void __init ux500_init_irq(void)
 	 * Init clocks here so that they are available for system timer
 	 * initialization.
 	 */
+	if (cpu_is_u5500())
+		db5500_prcmu_early_init();
 	if (cpu_is_u8500())
 		prcmu_early_init();
 	clk_init();
diff --git a/arch/arm/mach-ux500/cpufreq.c b/arch/arm/mach-ux500/cpufreq.c
deleted file mode 100644
index 5c5b747f134d..000000000000
--- a/arch/arm/mach-ux500/cpufreq.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * CPU frequency scaling for u8500
- * Inspired by linux/arch/arm/mach-davinci/cpufreq.c
- *
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <mach/prcmu.h>
-#include <mach/prcmu-defs.h>
-
-#define DRIVER_NAME "cpufreq-u8500"
-#define CPUFREQ_NAME "u8500"
-
-static struct device *dev;
-
-static struct cpufreq_frequency_table freq_table[] = {
-	[0] = {
-		.index = 0,
-		.frequency = 200000,
-	},
-	[1] = {
-		.index = 1,
-		.frequency = 300000,
-	},
-	[2] = {
-		.index = 2,
-		.frequency = 600000,
-	},
-	[3] = {
-		/* Used for CPU_OPP_MAX, if available */
-		.index = 3,
-		.frequency = CPUFREQ_TABLE_END,
-	},
-	[4] = {
-		.index = 4,
-		.frequency = CPUFREQ_TABLE_END,
-	},
-};
-
-static enum prcmu_cpu_opp index2opp[] = {
-	CPU_OPP_EXT_CLK,
-	CPU_OPP_50,
-	CPU_OPP_100,
-	CPU_OPP_MAX
-};
-
-static int u8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, freq_table);
-}
-
-static int u8500_cpufreq_target(struct cpufreq_policy *policy,
-				unsigned int target_freq,
-				unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	unsigned int index;
-	int ret = 0;
-
-	/*
-	 * Ensure desired rate is within allowed range.  Some govenors
-	 * (ondemand) will just pass target_freq=0 to get the minimum.
-	 */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
-
-	ret = cpufreq_frequency_table_target(policy, freq_table,
-					     target_freq, relation, &index);
-	if (ret < 0) {
-		dev_err(dev, "Could not look up next frequency\n");
-		return ret;
-	}
-
-	freqs.old = policy->cur;
-	freqs.new = freq_table[index].frequency;
-	freqs.cpu = policy->cpu;
-
-	if (freqs.old == freqs.new) {
-		dev_dbg(dev, "Current and target frequencies are equal\n");
-		return 0;
-	}
-
-	dev_dbg(dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	ret = prcmu_set_cpu_opp(index2opp[index]);
-	if (ret < 0) {
-		dev_err(dev, "Failed to set OPP level\n");
-		return ret;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static unsigned int u8500_cpufreq_getspeed(unsigned int cpu)
-{
-	int i;
-
-	for (i = 0; prcmu_get_cpu_opp() != index2opp[i]; i++)
-		;
-	return freq_table[i].frequency;
-}
-
-static int __cpuinit u8500_cpu_init(struct cpufreq_policy *policy)
-{
-	int res;
-
-	BUILD_BUG_ON(ARRAY_SIZE(index2opp) + 1 != ARRAY_SIZE(freq_table));
-
-	if (cpu_is_u8500v2()) {
-		freq_table[1].frequency = 400000;
-		freq_table[2].frequency = 800000;
-		if (prcmu_has_arm_maxopp())
-			freq_table[3].frequency = 1000000;
-	}
-
-	/* get policy fields based on the table */
-	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-	if (!res)
-		cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
-	else {
-		dev_err(dev, "u8500-cpufreq : Failed to read policy table\n");
-		return res;
-	}
-
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-	policy->cur = u8500_cpufreq_getspeed(policy->cpu);
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
-	/*
-	 * FIXME : Need to take time measurement across the target()
-	 *	   function with no/some/all drivers in the notification
-	 *	   list.
-	 */
-	policy->cpuinfo.transition_latency = 200 * 1000; /* in ns */
-
-	/* policy sharing between dual CPUs */
-	cpumask_copy(policy->cpus, &cpu_present_map);
-
-	policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
-
-	return res;
-}
-
-static struct freq_attr *u8500_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-static int u8500_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static struct cpufreq_driver u8500_driver = {
-	.owner = THIS_MODULE,
-	.flags = CPUFREQ_STICKY,
-	.verify = u8500_cpufreq_verify_speed,
-	.target = u8500_cpufreq_target,
-	.get = u8500_cpufreq_getspeed,
-	.init = u8500_cpu_init,
-	.exit = u8500_cpu_exit,
-	.name = CPUFREQ_NAME,
-	.attr = u8500_cpufreq_attr,
-};
-
-static int __init u8500_cpufreq_probe(struct platform_device *pdev)
-{
-	dev = &pdev->dev;
-	return cpufreq_register_driver(&u8500_driver);
-}
-
-static int __exit u8500_cpufreq_remove(struct platform_device *pdev)
-{
-	return cpufreq_unregister_driver(&u8500_driver);
-}
-
-static struct platform_driver u8500_cpufreq_driver = {
-	.driver = {
-		.name	 = DRIVER_NAME,
-		.owner	 = THIS_MODULE,
-	},
-	.remove = __exit_p(u8500_cpufreq_remove),
-};
-
-static int __init u8500_cpufreq_init(void)
-{
-	return platform_driver_probe(&u8500_cpufreq_driver,
-				     &u8500_cpufreq_probe);
-}
-
-device_initcall(u8500_cpufreq_init);
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index bd88c1e74060..6ad983294103 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -17,6 +17,8 @@
 #define U5500_GIC_DIST_BASE	0xA0411000
 #define U5500_GIC_CPU_BASE	0xA0410100
 #define U5500_DMA_BASE		0x90030000
+#define U5500_STM_BASE		0x90020000
+#define U5500_STM_REG_BASE	(U5500_STM_BASE + 0xF000)
 #define U5500_MCDE_BASE		0xA0400000
 #define U5500_MODEM_BASE	0xB0000000
 #define U5500_L2CC_BASE		0xA0412000
@@ -29,7 +31,9 @@
 #define U5500_NAND0_BASE	0x60000000
 #define U5500_NAND1_BASE	0x70000000
 #define U5500_TWD_BASE		0xa0410600
+#define U5500_ICN_BASE		0xA0040000
 #define U5500_B2R2_BASE		0xa0200000
+#define U5500_BOOT_ROM_BASE	0x90000000
 
 #define U5500_FSMC_BASE		(U5500_PER1_BASE + 0x0000)
 #define U5500_SDI0_BASE		(U5500_PER1_BASE + 0x1000)
@@ -60,6 +64,7 @@
 #define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)
 #define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)
 #define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)
+#define U5500_PRCMU_TCDM_BASE	(U5500_PER4_BASE + 0x18000)
 
 #define U5500_SPI0_BASE		(U5500_PER5_BASE + 0x0000)
 #define U5500_SPI1_BASE		(U5500_PER5_BASE + 0x1000)
@@ -83,7 +88,7 @@
 #define U5500_HASH0_BASE	(U5500_PER6_BASE + 0x1000)
 #define U5500_HASH1_BASE	(U5500_PER6_BASE + 0x2000)
 #define U5500_PKA_BASE		(U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5000)
+#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5100)
 #define U5500_MTU0_BASE		(U5500_PER6_BASE + 0x6000)
 #define U5500_MTU1_BASE		(U5500_PER6_BASE + 0x7000)
 #define U5500_CR_BASE		(U5500_PER6_BASE + 0x8000)
@@ -114,8 +119,19 @@
 #define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
 #define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
 
-#define U5500_ESRAM_BASE		0x40000000
+#define U5500_ACCCON_BASE_SEC	(0xBFFF0000)
+#define U5500_ACCCON_BASE		(0xBFFF1000)
+#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
+#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
+
+#define U5500_ESRAM_BASE	        0x40000000
 #define U5500_ESRAM_DMA_LCPA_OFFSET	0x10000
 #define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
 
+#define U5500_MCDE_SIZE		0x1000
+#define U5500_DSI_LINK_SIZE	0x1000
+#define U5500_DSI_LINK_COUNT	0x2
+#define U5500_DSI_LINK1_BASE	(U5500_MCDE_BASE + U5500_MCDE_SIZE)
+#define U5500_DSI_LINK2_BASE	(U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 16647b255378..049997109cf9 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -15,8 +15,13 @@
 #define U8500_ESRAM_BANK2	(U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
 #define U8500_ESRAM_BANK3	(U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
 #define U8500_ESRAM_BANK4	(U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
-/* Use bank 4 for DMA LCPA */
-#define U8500_DMA_LCPA_BASE	U8500_ESRAM_BANK4
+/*
+ * on V1 DMA uses 4KB for logical parameters position is right after the 64KB
+ * reserved for security
+ */
+#define U8500_ESRAM_DMA_LCPA_OFFSET     0x10000
+
+#define U8500_DMA_LCPA_BASE    (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
 #define U8500_DMA_LCPA_BASE_ED	(U8500_ESRAM_BANK4 + 0x4000)
 
 #define U8500_PER3_BASE		0x80000000
@@ -27,9 +32,12 @@
 #define U8500_B2R2_BASE		0x80130000
 #define U8500_HSEM_BASE		0x80140000
 #define U8500_PER4_BASE		0x80150000
+#define U8500_TPIU_BASE		0x80190000
 #define U8500_ICN_BASE		0x81000000
 
 #define U8500_BOOT_ROM_BASE	0x90000000
+/* ASIC ID is at 0xbf4 offset within this region */
+#define U8500_ASIC_ID_BASE	0x9001D000
 
 #define U8500_PER6_BASE		0xa03c0000
 #define U8500_PER5_BASE		0xa03e0000
@@ -70,13 +78,15 @@
 
 /* per6 base addresses */
 #define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
-#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
-#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
+#define U8500_HASH0_BASE        (U8500_PER6_BASE + 0x1000)
+#define U8500_HASH1_BASE        (U8500_PER6_BASE + 0x2000)
+#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x4000)
+#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x5100)
 #define U8500_MTU0_BASE		(U8500_PER6_BASE + 0x6000) /* v1 */
 #define U8500_MTU1_BASE		(U8500_PER6_BASE + 0x7000) /* v1 */
 #define U8500_CR_BASE		(U8500_PER6_BASE + 0x8000) /* v1 */
-#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
-#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
+#define U8500_CRYP0_BASE	(U8500_PER6_BASE + 0xa000)
+#define U8500_CRYP1_BASE	(U8500_PER6_BASE + 0xb000)
 #define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
 
 /* per5 base addresses */
@@ -93,7 +103,8 @@
 #define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
 #define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
 #define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
-#define U8500_PRCMU_TCDM_BASE   (U8500_PER4_BASE + 0x68000)
+#define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
+#define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
 
 /* per3 base addresses */
 #define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
@@ -124,6 +135,7 @@
 #define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
 #define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
 #define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
+#define U8500_MSP3_BASE		(U8500_PER1_BASE + 0x5000)
 #define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
 #define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
 #define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
@@ -143,4 +155,15 @@
 #define U8500_GPIOBANK7_BASE	(U8500_GPIO2_BASE + 0x80)
 #define U8500_GPIOBANK8_BASE	U8500_GPIO3_BASE
 
+#define U8500_MCDE_SIZE		0x1000
+#define U8500_DSI_LINK_SIZE	0x1000
+#define U8500_DSI_LINK1_BASE	(U8500_MCDE_BASE + U8500_MCDE_SIZE)
+#define U8500_DSI_LINK2_BASE	(U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK3_BASE	(U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK_COUNT	0x3
+
+/* Modem and APE physical addresses */
+#define U8500_MODEM_BASE	0xe000000
+#define U8500_APE_BASE		0x6000000
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index bf63f2631ba0..2c6f71049f2e 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -35,6 +35,7 @@
 #ifndef __ASSEMBLY__
 
 #include <mach/id.h>
+extern void __iomem *_PRCMU_BASE;
 
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
index f1288d10b6ab..02b541a37ee5 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -75,6 +75,26 @@ static inline bool __attribute_const__ cpu_is_u8500v2(void)
 	return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
 }
 
+static inline bool cpu_is_u8500v20(void)
+{
+	return cpu_is_u8500() && (dbx500_revision() == 0xB0);
+}
+
+static inline bool cpu_is_u8500v21(void)
+{
+	return cpu_is_u8500() && (dbx500_revision() == 0xB1);
+}
+
+static inline bool cpu_is_u8500v20_or_later(void)
+{
+	return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11();
+}
+
+static inline bool ux500_is_svp(void)
+{
+	return false;
+}
+
 #define ux500_unknown_soc()	BUG()
 
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 97ef55f84934..47969909836c 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -50,6 +50,11 @@
 
 #define MOP500_IRQ_END		MOP500_NR_IRQS
 
+/*
+ * We may have several boards, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_BOARD_START remains the same for either board.
+ */
 #if MOP500_IRQ_END > IRQ_BOARD_END
 #undef IRQ_BOARD_END
 #define IRQ_BOARD_END	MOP500_IRQ_END
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
new file mode 100644
index 000000000000..29d972c7717b
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_BOARD_U5500_H
+#define __MACH_IRQS_BOARD_U5500_H
+
+#define AB5500_NR_IRQS		5
+#define IRQ_AB5500_BASE		IRQ_BOARD_START
+#define IRQ_AB5500_END		(IRQ_AB5500_BASE + AB5500_NR_IRQS)
+
+#define U5500_IRQ_END		IRQ_AB5500_END
+
+#if IRQ_BOARD_END < U5500_IRQ_END
+#undef IRQ_BOARD_END
+#define IRQ_BOARD_END		U5500_IRQ_END
+#endif
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
index bfa123dbec3b..77239776a6f2 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -83,4 +83,31 @@
 #define IRQ_DB5500_GPIO6		(IRQ_SHPI_START + 125)
 #define IRQ_DB5500_GPIO7		(IRQ_SHPI_START + 126)
 
+#ifdef CONFIG_UX500_SOC_DB5500
+
+/*
+ * After the GPIO ones we reserve a range of IRQ:s in which virtual
+ * IRQ:s representing modem IRQ:s can be allocated
+ */
+#define IRQ_MODEM_EVENTS_BASE	IRQ_SOC_START
+#define IRQ_MODEM_EVENTS_NBR	72
+#define IRQ_MODEM_EVENTS_END	(IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
+
+/* List of virtual IRQ:s that are allocated from the range above */
+#define MBOX_PAIR0_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 43)
+#define MBOX_PAIR1_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 45)
+#define MBOX_PAIR2_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 41)
+
+/*
+ * We may have several SoCs, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_SOC_START remains the same for either SoC.
+ */
+#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
+#undef IRQ_SOC_END
+#define IRQ_SOC_END		IRQ_MODEM_EVENTS_END
+#endif
+
+#endif /* CONFIG_UX500_SOC_DB5500 */
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
index 8b5d9f0a1633..68bc14974608 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
@@ -93,4 +93,58 @@
 #define IRQ_DB8500_GPIO7		(IRQ_SHPI_START + 126)
 #define IRQ_DB8500_GPIO8		(IRQ_SHPI_START + 127)
 
+#define IRQ_CA_WAKE_REQ_ED			(IRQ_SHPI_START + 71)
+#define IRQ_AC_READ_NOTIFICATION_0_ED		(IRQ_SHPI_START + 66)
+#define IRQ_AC_READ_NOTIFICATION_1_ED		(IRQ_SHPI_START + 64)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED	(IRQ_SHPI_START + 67)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED	(IRQ_SHPI_START + 65)
+
+#define IRQ_CA_WAKE_REQ_V1			(IRQ_SHPI_START + 83)
+#define IRQ_AC_READ_NOTIFICATION_0_V1		(IRQ_SHPI_START + 78)
+#define IRQ_AC_READ_NOTIFICATION_1_V1		(IRQ_SHPI_START + 76)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1	(IRQ_SHPI_START + 79)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1	(IRQ_SHPI_START + 77)
+
+#ifdef CONFIG_UX500_SOC_DB8500
+
+/* Virtual interrupts corresponding to the PRCMU wakeups.  */
+#define IRQ_PRCMU_BASE IRQ_SOC_START
+#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE)
+
+#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE)
+#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1)
+#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2)
+#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3)
+#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4)
+#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5)
+#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6)
+#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7)
+#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8)
+#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9)
+#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10)
+#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11)
+#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12)
+#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13)
+#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14)
+#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15)
+#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16)
+#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17)
+#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18)
+#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19)
+#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20)
+#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21)
+#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22)
+#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23)
+
+/*
+ * We may have several SoCs, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_SOC_START remains the same for either SoC.
+ */
+#if IRQ_SOC_END < IRQ_PRCMU_END
+#undef IRQ_SOC_END
+#define IRQ_SOC_END IRQ_PRCMU_END
+#endif
+
+#endif /* CONFIG_UX500_SOC_DB8500 */
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index ba1294c13c4d..9db68d264c5f 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -10,49 +10,47 @@
 #ifndef ASM_ARCH_IRQS_H
 #define ASM_ARCH_IRQS_H
 
-#include <mach/irqs-db5500.h>
-#include <mach/irqs-db8500.h>
+#include <mach/hardware.h>
 
-#define IRQ_LOCALTIMER                  29
-#define IRQ_LOCALWDOG                   30
+#define IRQ_LOCALTIMER			29
+#define IRQ_LOCALWDOG			30
 
 /* Shared Peripheral Interrupt (SHPI) */
 #define IRQ_SHPI_START			32
 
-/* Interrupt numbers generic for shared peripheral */
+/*
+ * MTU0 preserved for now until plat-nomadik is taught not to use it.  Don't
+ * add any other IRQs here, use the irqs-dbx500.h files.
+ */
 #define IRQ_MTU0		(IRQ_SHPI_START + 4)
 
-/* There are 128 shared peripheral interrupts assigned to
- * INTID[160:32]. The first 32 interrupts are reserved.
- */
-#define DBX500_NR_INTERNAL_IRQS		161
+#define DBX500_NR_INTERNAL_IRQS		160
 
 /* After chip-specific IRQ numbers we have the GPIO ones */
 #define NOMADIK_NR_GPIO			288
 #define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + DBX500_NR_INTERNAL_IRQS)
 #define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - DBX500_NR_INTERNAL_IRQS)
-#define IRQ_BOARD_START			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define IRQ_GPIO_END			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+#define IRQ_SOC_START		IRQ_GPIO_END
+/* This will be overridden by SoC-specific irq headers */
+#define IRQ_SOC_END		IRQ_SOC_START
 
+#include <mach/irqs-db5500.h>
+#include <mach/irqs-db8500.h>
+
+#define IRQ_BOARD_START		IRQ_SOC_END
 /* This will be overridden by board-specific irq headers */
-#define IRQ_BOARD_END			IRQ_BOARD_START
+#define IRQ_BOARD_END		IRQ_BOARD_START
 
 #ifdef CONFIG_MACH_U8500
 #include <mach/irqs-board-mop500.h>
 #endif
 
-/*
- * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual
- * IRQ:s representing modem IRQ:s can be allocated
- */
-#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1)
-#define IRQ_MODEM_EVENTS_NBR 72
-#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
-
-/* List of virtual IRQ:s that are allocated from the range above */
-#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
-#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
-#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
+#ifdef CONFIG_MACH_U5500
+#include <mach/irqs-board-u5500.h>
+#endif
 
-#define NR_IRQS				IRQ_MODEM_EVENTS_END
+#define NR_IRQS			IRQ_BOARD_END
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h
deleted file mode 100644
index 848ba64b561f..000000000000
--- a/arch/arm/mach-ux500/include/mach/prcmu-defs.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit definitions
- */
-
-#ifndef __MACH_PRCMU_DEFS_H
-#define __MACH_PRCMU_DEFS_H
-
-enum prcmu_cpu_opp {
-	CPU_OPP_INIT	  = 0x00,
-	CPU_OPP_NO_CHANGE = 0x01,
-	CPU_OPP_100	  = 0x02,
-	CPU_OPP_50	  = 0x03,
-	CPU_OPP_MAX	  = 0x04,
-	CPU_OPP_EXT_CLK	  = 0x07
-};
-enum prcmu_ape_opp {
-	APE_OPP_NO_CHANGE = 0x00,
-	APE_OPP_100	  = 0x02,
-	APE_OPP_50	  = 0x03,
-};
-
-#endif /* __MACH_PRCMU_DEFS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
deleted file mode 100644
index 455467e88791..000000000000
--- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit registers
- */
-
-#ifndef __MACH_PRCMU_REGS_H
-#define __MACH_PRCMU_REGS_H
-
-#include <mach/hardware.h>
-
-#define _PRCMU_BASE		IO_ADDRESS(U8500_PRCMU_BASE)
-
-#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
-#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
-#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
-#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
-#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
-#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
-#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
-#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
-
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
-#define PRCMU_IOCR              (_PRCMU_BASE + 0x310)
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
-#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
-#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
-#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
-#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
-#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
-#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
-#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
-#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
-#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
-#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
-
-#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
-#define ARM_WAKEUP_MODEM	0x1
-
-#define PRCM_ARM_IT1_CLEAR	(_PRCMU_BASE + 0x48C)
-#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
-#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
-
-#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
-#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
-#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
-#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
-#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
-#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
-#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
-#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
-
-/* System reset register */
-#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
-
-/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
-#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
-
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
-#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
-#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + 0x044)
-#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + 0x064)
-#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + 0x058)
-#define PRCM_TVCLK_MGT             (_PRCMU_BASE + 0x07c)
-#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
-#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
-#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
-#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
-
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
-#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
-
-#endif /* __MACH_PRCMU_REGS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
deleted file mode 100644
index c49e456162ef..000000000000
--- a/arch/arm/mach-ux500/include/mach/prcmu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit f/w API
- */
-#ifndef __MACH_PRCMU_H
-#define __MACH_PRCMU_H
-#include <mach/prcmu-defs.h>
-
-void __init prcmu_early_init(void);
-int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-int prcmu_set_ape_opp(enum prcmu_ape_opp opp);
-int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp);
-int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
-			   enum prcmu_cpu_opp cpu_opp);
-int prcmu_get_ape_opp(void);
-int prcmu_get_cpu_opp(void);
-bool prcmu_has_arm_maxopp(void);
-
-#endif /* __MACH_PRCMU_H */
diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c
deleted file mode 100644
index c522d26ef348..000000000000
--- a/arch/arm/mach-ux500/prcmu.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- *
- * U8500 PRCM Unit interface driver
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
-#include <linux/jiffies.h>
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <mach/prcmu-regs.h>
-#include <mach/prcmu-defs.h>
-
-/* Global var to runtime determine TCDM base for v2 or v1 */
-static __iomem void *tcdm_base;
-
-#define _MBOX_HEADER		(tcdm_base + 0xFE8)
-#define MBOX_HEADER_REQ_MB0	(_MBOX_HEADER + 0x0)
-
-#define REQ_MB1 (tcdm_base + 0xFD0)
-#define REQ_MB5 (tcdm_base + 0xE44)
-
-#define REQ_MB1_ARMOPP		(REQ_MB1 + 0x0)
-#define REQ_MB1_APEOPP		(REQ_MB1 + 0x1)
-#define REQ_MB1_BOOSTOPP	(REQ_MB1 + 0x2)
-
-#define ACK_MB1 (tcdm_base + 0xE04)
-#define ACK_MB5 (tcdm_base + 0xDF4)
-
-#define ACK_MB1_CURR_ARMOPP		(ACK_MB1 + 0x0)
-#define ACK_MB1_CURR_APEOPP		(ACK_MB1 + 0x1)
-
-#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
-#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
-#define REQ_MB5_I2C_REG (REQ_MB5 + 2)
-#define REQ_MB5_I2C_VAL (REQ_MB5 + 3)
-
-#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
-#define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
-
-#define PRCM_AVS_VARM_MAX_OPP		(tcdm_base + 0x2E4)
-#define PRCM_AVS_ISMODEENABLE		7
-#define PRCM_AVS_ISMODEENABLE_MASK	(1 << PRCM_AVS_ISMODEENABLE)
-
-#define I2C_WRITE(slave) \
-	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define I2C_READ(slave) \
-	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0))
-#define I2C_STOP_EN BIT(3)
-
-enum mb1_h {
-	MB1H_ARM_OPP = 1,
-	MB1H_APE_OPP,
-	MB1H_ARM_APE_OPP,
-};
-
-static struct {
-	struct mutex lock;
-	struct completion work;
-	struct {
-		u8 arm_opp;
-		u8 ape_opp;
-		u8 arm_status;
-		u8 ape_status;
-	} ack;
-} mb1_transfer;
-
-enum ack_mb5_status {
-	I2C_WR_OK = 0x01,
-	I2C_RD_OK = 0x02,
-};
-
-#define MBOX_BIT BIT
-#define NUM_MBOX 8
-
-static struct {
-	struct mutex lock;
-	struct completion work;
-	bool failed;
-	struct {
-		u8 status;
-		u8 value;
-	} ack;
-} mb5_transfer;
-
-/**
- * prcmu_abb_read() - Read register value(s) from the ABB.
- * @slave:	The I2C slave address.
- * @reg:	The (start) register address.
- * @value:	The read out value(s).
- * @size:	The number of registers to read.
- *
- * Reads register value(s) from the ABB.
- * @size has to be 1 for the current firmware version.
- */
-int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	int r;
-
-	if (size != 1)
-		return -EINVAL;
-
-	r = mutex_lock_interruptible(&mb5_transfer.lock);
-	if (r)
-		return r;
-
-	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
-		cpu_relax();
-
-	writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP);
-	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
-	writeb(reg, REQ_MB5_I2C_REG);
-
-	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
-	if (!wait_for_completion_timeout(&mb5_transfer.work,
-			msecs_to_jiffies(500))) {
-		pr_err("prcmu: prcmu_abb_read timed out.\n");
-		r = -EIO;
-		goto unlock_and_return;
-	}
-	r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
-	if (!r)
-		*value = mb5_transfer.ack.value;
-
-unlock_and_return:
-	mutex_unlock(&mb5_transfer.lock);
-	return r;
-}
-EXPORT_SYMBOL(prcmu_abb_read);
-
-/**
- * prcmu_abb_write() - Write register value(s) to the ABB.
- * @slave:	The I2C slave address.
- * @reg:	The (start) register address.
- * @value:	The value(s) to write.
- * @size:	The number of registers to write.
- *
- * Reads register value(s) from the ABB.
- * @size has to be 1 for the current firmware version.
- */
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	int r;
-
-	if (size != 1)
-		return -EINVAL;
-
-	r = mutex_lock_interruptible(&mb5_transfer.lock);
-	if (r)
-		return r;
-
-
-	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
-		cpu_relax();
-
-	writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP);
-	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
-	writeb(reg, REQ_MB5_I2C_REG);
-	writeb(*value, REQ_MB5_I2C_VAL);
-
-	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
-	if (!wait_for_completion_timeout(&mb5_transfer.work,
-			msecs_to_jiffies(500))) {
-		pr_err("prcmu: prcmu_abb_write timed out.\n");
-		r = -EIO;
-		goto unlock_and_return;
-	}
-	r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
-
-unlock_and_return:
-	mutex_unlock(&mb5_transfer.lock);
-	return r;
-}
-EXPORT_SYMBOL(prcmu_abb_write);
-
-static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp,
-			    enum prcmu_cpu_opp cpu_opp)
-{
-	bool do_ape;
-	bool do_arm;
-	int err = 0;
-
-	do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP));
-	do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP));
-
-	mutex_lock(&mb1_transfer.lock);
-
-	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
-		cpu_relax();
-
-	writeb(0, MBOX_HEADER_REQ_MB0);
-	writeb(cpu_opp, REQ_MB1_ARMOPP);
-	writeb(ape_opp, REQ_MB1_APEOPP);
-	writeb(0, REQ_MB1_BOOSTOPP);
-	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
-	wait_for_completion(&mb1_transfer.work);
-	if ((do_ape) && (mb1_transfer.ack.ape_status != 0))
-		err = -EIO;
-	if ((do_arm) && (mb1_transfer.ack.arm_status != 0))
-		err = -EIO;
-
-	mutex_unlock(&mb1_transfer.lock);
-
-	return err;
-}
-
-/**
- * prcmu_set_ape_opp() - Set the OPP of the APE.
- * @opp:	The OPP to set.
- *
- * This function sets the OPP of the APE.
- */
-int prcmu_set_ape_opp(enum prcmu_ape_opp opp)
-{
-	return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE);
-}
-EXPORT_SYMBOL(prcmu_set_ape_opp);
-
-/**
- * prcmu_set_cpu_opp() - Set the OPP of the CPU.
- * @opp:	The OPP to set.
- *
- * This function sets the OPP of the CPU.
- */
-int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp)
-{
-	return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp);
-}
-EXPORT_SYMBOL(prcmu_set_cpu_opp);
-
-/**
- * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU.
- * @ape_opp:	The APE OPP to set.
- * @cpu_opp:	The CPU OPP to set.
- *
- * This function sets the OPPs of the APE and the CPU.
- */
-int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
-			   enum prcmu_cpu_opp cpu_opp)
-{
-	return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp);
-}
-EXPORT_SYMBOL(prcmu_set_ape_cpu_opps);
-
-/**
- * prcmu_get_ape_opp() - Get the OPP of the APE.
- *
- * This function gets the OPP of the APE.
- */
-enum prcmu_ape_opp prcmu_get_ape_opp(void)
-{
-	return readb(ACK_MB1_CURR_APEOPP);
-}
-EXPORT_SYMBOL(prcmu_get_ape_opp);
-
-/**
- * prcmu_get_cpu_opp() - Get the OPP of the CPU.
- *
- * This function gets the OPP of the CPU. The OPP is specified in %%.
- * PRCMU_OPP_EXT is a special OPP value, not specified in %%.
- */
-int prcmu_get_cpu_opp(void)
-{
-	return readb(ACK_MB1_CURR_ARMOPP);
-}
-EXPORT_SYMBOL(prcmu_get_cpu_opp);
-
-bool prcmu_has_arm_maxopp(void)
-{
-	return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK)
-		== PRCM_AVS_ISMODEENABLE_MASK;
-}
-
-static void read_mailbox_0(void)
-{
-	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_1(void)
-{
-	mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP);
-	mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP);
-	complete(&mb1_transfer.work);
-	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_2(void)
-{
-	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_3(void)
-{
-	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_4(void)
-{
-	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_5(void)
-{
-	mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS);
-	mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL);
-	complete(&mb5_transfer.work);
-	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_6(void)
-{
-	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_7(void)
-{
-	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
-}
-
-static void (* const read_mailbox[NUM_MBOX])(void) = {
-	read_mailbox_0,
-	read_mailbox_1,
-	read_mailbox_2,
-	read_mailbox_3,
-	read_mailbox_4,
-	read_mailbox_5,
-	read_mailbox_6,
-	read_mailbox_7
-};
-
-static irqreturn_t prcmu_irq_handler(int irq, void *data)
-{
-	u32 bits;
-	u8 n;
-
-	bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1));
-	if (unlikely(!bits))
-		return IRQ_NONE;
-
-	for (n = 0; bits; n++) {
-		if (bits & MBOX_BIT(n)) {
-			bits -= MBOX_BIT(n);
-			read_mailbox[n]();
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-void __init prcmu_early_init(void)
-{
-	if (cpu_is_u8500v11() || cpu_is_u8500ed()) {
-		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
-	} else if (cpu_is_u8500v2()) {
-		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
-	} else {
-		pr_err("prcmu: Unsupported chip version\n");
-		BUG();
-	}
-}
-
-static int __init prcmu_init(void)
-{
-	if (cpu_is_u8500ed()) {
-		pr_err("prcmu: Unsupported chip version\n");
-		return 0;
-	}
-
-	mutex_init(&mb1_transfer.lock);
-	init_completion(&mb1_transfer.work);
-	mutex_init(&mb5_transfer.lock);
-	init_completion(&mb5_transfer.work);
-
-	/* Clean up the mailbox interrupts after pre-kernel code. */
-	writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
-
-	return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0,
-			   "prcmu", NULL);
-}
-
-arch_initcall(prcmu_init);