summaryrefslogtreecommitdiffstats
path: root/arch/arm64
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-12-12 16:43:44 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-12-12 16:43:44 -0800
commit097b285d32c7cb22dd4af2286ba61668a6c367ef (patch)
treec9c247827cf61353a306e37e543f6caf29e092ca /arch/arm64
parent79dbddaf8e9613a529d1b07f181f07894bf6fb8e (diff)
parent7f4c977849d494a1ff173fbc226b69192ec02c90 (diff)
downloadlinux-097b285d32c7cb22dd4af2286ba61668a6c367ef.tar.bz2
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann: "Here are a bunch of small bug fixes for various ARM platforms, nothing really sticks out this week, most of either fixes bugs in code that was just added in 4.4, or that has been broken for many years without anyone noticing. at91/sama5d2: - fix sama5de hardware setup of sd/mmc interface - proper selection of pinctrl drivers. PIO4 is necessary for sama5d2 berlin: - fix incorrect clock input for SDIO exynos: - Fix potential NULL pointer dereference in Exynos PMU driver. imx: - Fix vf610 SAI clock configuration bug which is discovered by the newly added master mode support in SAI audio driver. - Fix buggy L2 cache latency values in vf610 device trees, which may cause system hang when cpu runs at a higher frequency. ixp4xx: - fix prototypes for readl/writel functions ls2080a: - use little-endian register access for GPIO and SDHCI omap: - Fix clock source for ARM TWD and global timers on am437x - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when MACH_OMAP3_PANDORA is selected - Fix SPI DMA handles for dm816x as only some were mapped - Fix up mbox cells for dm816x to make mailbox usable pxa: - use PWM lookup table for all ezx machines s3c24xx: - Remove incorrect __init annotation from s3c24xx cpufreq driver structures. versatile: - fix PCI IRQ mapping on Versatile PB" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ls2080a/dts: Add little endian property for GPIO IP block dt-bindings: define little-endian property for QorIQ GPIO ARM64: dts: ls2080a: fix eSDHC endianness ARM: dts: vf610: use reset values for L2 cache latencies ARM: pxa: use PWM lookup table for all machines ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1 ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock ARM: dts: am4372: fix clock source for arm twd and global timers ARM: at91: fix pinctrl driver selection ARM: at91/dt: add always-on to 1.8V regulator ARM: dts: vf610: fix clock definition for SAI2 ARM: imx: clk-vf610: fix SAI clock tree ARM: ixp4xx: fix read{b,w,l} return types irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE ARM: dts: add dm816x missing spi DT dma handles ARM: dts: add dm816x missing #mbox-cells cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf
Diffstat (limited to 'arch/arm64')
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi5
1 files changed, 5 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index e81cd48d6245..925552e7b4f3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -269,6 +269,7 @@
clock-frequency = <0>; /* Updated by bootloader */
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
+ little-endian;
bus-width = <4>;
};
@@ -277,6 +278,7 @@
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <0 36 0x4>; /* Level high type */
gpio-controller;
+ little-endian;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -287,6 +289,7 @@
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <0 36 0x4>; /* Level high type */
gpio-controller;
+ little-endian;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -297,6 +300,7 @@
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <0 37 0x4>; /* Level high type */
gpio-controller;
+ little-endian;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -307,6 +311,7 @@
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <0 37 0x4>; /* Level high type */
gpio-controller;
+ little-endian;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;