diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-02-01 16:07:54 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-02-01 16:07:54 -0800 |
| commit | 537433b6241e067de2d9da3bed5f4fed9c9eac58 (patch) | |
| tree | a42c12eb76b5b35aa04edc409425ca2c01ceb2e3 /arch/arm64 | |
| parent | ab486bc9a591689f3ac2b6ebc072309371f8f451 (diff) | |
| parent | 9a288ba7d1dd088c10697905ff42d48830a7c549 (diff) | |
| download | linux-537433b6241e067de2d9da3bed5f4fed9c9eac58.tar.bz2 | |
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Arnd Bergmann:
"We get a moderate number of new machines this time, and only one new
SoC variant (Actions S700):
Actions:
- S700 Soc and CubieBoard7 development board
- Allo.com Sparky Single-board-computer
Allwinner:
- Orange Pi R1 development board
- Libre Computer Board ALL-H3-CC H3 single-board computer
ASpeed ast2x00:
- Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
- Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
- Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
AT91:
- Axentia Nattis/Natte digital signage
- sama5d2 PTC-ek Evaluation board
Freescale/NXP i.MX:
- SolidRun Humminboard2 development board
- Variscite DART-MX6 SoM and Carrier-board
- Technologic TS-4600 and TS-7970 development board
- Toradex Colibri iMX7D SoM board
- v1.5 variant of Solidrun Cubox-i and Hummingboard
Freescale/NXP Layerscape:
- Moxa UC-8410A Series industrial computer
Gemini:
- D-Link DNS-313 NAS enclosure
OMAP:
- LogicPD OMAP35xx SOM-LV devkit
- LogicPD OMAP35xx Torpedo devkit
Renesas:
- r8a77970 (V3M) Starter Kit board
- r8a7795 (M3-W) Salvator-XS board
We finally managed to get the dtc warnings under control, with no more
build-time warnings for bad device tree files. This includes fixes for
the majority of platforms, including nomadik, samsung, lpc32xx, STi,
spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
renesas, hisilicon, and broadcom.
Files get rearranged on a few platforms, in particular the Marvell
Armada 7K/8K device tree files are changed in preparation for future
SoC support, based on more than two of the same chips in one package,
and some boards get renamed for oxnas for consistency.
Finally, many existing SoCs gain descriptions for additional on-chip
devices that we can now support with kernel drivers:
- Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
- Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
- Aspeed clk controller support
- Freescale LS1088A, LS1021A device support
- Gemini Ethernet, PCI, TVE, panel
- Keystone gpio, qspi, more uarts
- Mediatek cpufreq, regulator, clock, reset
- Marvell thermal, cpufreq, nand
- Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
- Rockchip Mipi, GPU, display
- Samsung Exynos5433 PMU, power domain, nfc
- Spreadtrum: sc9860 clocks
- Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
arm64: dts: stratix10: fix SPI settings
ARM: dts: socfpga: add i2c reset signals
arm64: dts: stratix10: add USB ECC reset bit
arm64: dts: stratix10: enable USB on the devkit
ARM: dts: socfpga: disable over-current for Arria10 USB devkit
ARM: dts: Nokia N9: add support for up/down keys in the dts
ARM: dts: nomadik: add interrupt-parent for clcd
ARM: dts: Add ethernet to a bunch of platforms
ARM: dts: Add ethernet to the Gemini SoC
ARM: dts: rename oxnas dts files
ARM: dts: s5pv210: add interrupt-parent for ohci
ARM: lpc3250: fix uda1380 gpio numbers
ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
ARM: dts: n900: Add aliases for lcd and tvout displays
ARM: dts: Update ti-sysc data for existing users
ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
arm: spear13xx: Fix spics gpio controller's warning
arm: spear13xx: Fix dmas cells
...
Diffstat (limited to 'arch/arm64')
105 files changed, 4503 insertions, 1485 deletions
diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile index cc4661256356..d8b923480f5a 100644 --- a/arch/arm64/boot/dts/actions/Makefile +++ b/arch/arm64/boot/dts/actions/Makefile @@ -1 +1,3 @@ +dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb + dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts new file mode 100644 index 000000000000..ef79d7905f44 --- /dev/null +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + */ + +/dts-v1/; + +#include "s700.dtsi" + +/ { + compatible = "cubietech,cubieboard7", "actions,s700"; + model = "CubieBoard7"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + memory@1,e0000000 { + device_type = "memory"; + reg = <0x1 0xe0000000 0x0 0x0>; + }; + + uart3_clk: uart3-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&timer { + clocks = <&hosc>; +}; + +&uart3 { + status = "okay"; + clocks = <&uart3_clk>; +}; diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi new file mode 100644 index 000000000000..66dd5309f0a2 --- /dev/null +++ b/arch/arm64/boot/dts/actions/s700.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "actions,s700"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon@1f000000 { + reg = <0x0 0x1f000000 0x0 0x1000000>; + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + hosc: hosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@e00f1000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe00f1000 0x0 0x1000>, + <0x0 0xe00f2000 0x0 0x2000>, + <0x0 0xe00f4000 0x0 0x2000>, + <0x0 0xe00f6000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart0: serial@e0120000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0120000 0x0 0x2000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart1: serial@e0122000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0122000 0x0 0x2000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@e0124000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0124000 0x0 0x2000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: serial@e0126000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0126000 0x0 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart4: serial@e0128000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0128000 0x0 0x2000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart5: serial@e012a000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012a000 0x0 0x2000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart6: serial@e012c000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012c000 0x0 0x2000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sps: power-controller@e01b0100 { + compatible = "actions,s700-sps"; + reg = <0x0 0xe01b0100 0x0 0x100>; + #power-domain-cells = <1>; + }; + + timer: timer@e024c000 { + compatible = "actions,s700-timer"; + reg = <0x0 0xe024c000 0x0 0x4000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "timer1"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 4a8d3f83a36e..a6975670cd1c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -60,6 +60,26 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + + pwr-led { + label = "bananapi-m64:red:pwr"; + gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + default-state = "on"; + }; + + green { + label = "bananapi-m64:green:user"; + gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */ + }; + + blue { + label = "bananapi-m64:blue:user"; + gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ @@ -153,6 +173,17 @@ #include "axp803.dtsi" +®_aldo1 { + /* + * This regulator also drives the PE pingroup GPIOs, + * which also controls two LEDs. + */ + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "afvcc-csi"; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>; @@ -168,6 +199,11 @@ }; ®_dc1sw { + /* + * This regulator also indirectly drives the PD pingroup GPIOs, + * which also controls the power LED. + */ + regulator-always-on; regulator-name = "vcc-phy"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 338e786155b1..8807664f363a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -57,6 +57,11 @@ chosen { stdout-path = "serial0:115200n8"; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; }; &mmc0 { @@ -70,6 +75,24 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_aldo2>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; +}; + &r_rsb { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 5f8ff4017d45..240d35731d10 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -57,13 +57,6 @@ chosen { stdout-path = "serial0:115200n8"; }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; }; &ehci1 { @@ -73,7 +66,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; @@ -83,6 +76,122 @@ status = "okay"; }; +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp803.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "afvcc-csi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi-dsi"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_dldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 7c028af58f47..1ed9f219deaf 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -53,6 +53,7 @@ compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -133,9 +134,25 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index 6eb8092d8e57..f1447003ea3c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -127,7 +127,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index a0ca925175aa..9e51d3a5f4e6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -161,7 +161,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index b47790650144..0f25c4a6f15d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -168,7 +168,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index a42fd79a62a3..af43533c7134 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -64,17 +64,43 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + post-power-on-delay-ms = <200>; + }; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -90,3 +116,9 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index d9a720bff05d..e237c05cfdb4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -98,6 +98,10 @@ compatible = "allwinner,sun50i-h5-ccu"; }; +&display_clocks { + compatible = "allwinner,sun50i-h5-de2-clk"; +}; + &mmc0 { compatible = "allwinner,sun50i-h5-mmc", "allwinner,sun50i-a64-mmc"; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 9db19314c60c..c89d0c307f8d 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -249,7 +249,9 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xffda4000 0x1000>; - interrupts = <0 101 4>; + interrupts = <0 99 4>; + resets = <&rst SPIM0_RESET>; + reg-io-width = <4>; num-chipselect = <4>; bus-num = <0>; status = "disabled"; @@ -260,7 +262,9 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xffda5000 0x1000>; - interrupts = <0 102 4>; + interrupts = <0 100 4>; + resets = <&rst SPIM1_RESET>; + reg-io-width = <4>; num-chipselect = <4>; bus-num = <0>; status = "disabled"; @@ -336,8 +340,8 @@ interrupts = <0 93 4>; phys = <&usbphy0>; phy-names = "usb2-phy"; - resets = <&rst USB0_RESET>; - reset-names = "dwc2"; + resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; + reset-names = "dwc2", "dwc2-ecc"; status = "disabled"; }; @@ -347,8 +351,8 @@ interrupts = <0 94 4>; phys = <&usbphy0>; phy-names = "usb2-phy"; - resets = <&rst USB1_RESET>; - reset-names = "dwc2"; + resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; + reset-names = "dwc2", "dwc2-ecc"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index a37c46112876..000756429b77 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -97,3 +97,7 @@ &uart0 { status = "okay"; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 70eca1f8736a..447b98d30921 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -17,6 +17,19 @@ }; }; +ðmac { + status = "okay"; + phy-mode = "rgmii"; + pinctrl-0 = <ð_rgmii_y_pins>; + pinctrl-names = "default"; +}; + &uart_AO { status = "okay"; }; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b932a784b02a..a80632641b39 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axg-clkc.h> / { compatible = "amlogic,meson-axg"; @@ -113,13 +114,55 @@ #size-cells = <2>; ranges; - cbus: cbus@ffd00000 { + cbus: bus@ffd00000 { compatible = "simple-bus"; reg = <0x0 0xffd00000 0x0 0x25000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + reset: reset-controller@1004 { + compatible = "amlogic,meson-axg-reset"; + reg = <0x0 0x01004 0x0 0x9c>; + #reset-cells = <1>; + }; + + spicc0: spi@13000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x13000 0x0 0x3c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC0>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@15000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x15000 0x0 0x3c>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC1>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart_A: serial@24000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; reg = <0x0 0x24000 0x0 0x14>; @@ -135,6 +178,19 @@ }; }; + ethmac: ethernet@ff3f0000 { + compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000 + 0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + status = "disabled"; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; reg = <0x0 0xffc01000 0 0x1000>, @@ -148,6 +204,20 @@ #address-cells = <0>; }; + hiubus: bus@ff63c000 { + compatible = "simple-bus"; + reg = <0x0 0xff63c000 0x0 0x1c00>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + + clkc: clock-controller@0 { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x320>; + }; + }; + mailbox: mailbox@ff63dc00 { compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; reg = <0 0xff63dc00 0 0x400>; @@ -157,6 +227,226 @@ #mbox-cells = <1>; }; + periphs: periphs@ff634000 { + compatible = "simple-bus"; + reg = <0x0 0xff634000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; + + pinctrl_periphs: pinctrl@480 { + compatible = "amlogic,meson-axg-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@480 { + reg = <0x0 0x00480 0x0 0x40>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, + <0x0 0x00430 0x0 0x3c>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_periphs 0 0 86>; + }; + + eth_rgmii_x_pins: eth-x-rgmii { + mux { + groups = "eth_mdio_x", + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + }; + }; + + eth_rgmii_y_pins: eth-y-rgmii { + mux { + groups = "eth_mdio_y", + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + }; + }; + + pwm_a_a_pins: pwm_a_a { + mux { + groups = "pwm_a_a"; + function = "pwm_a"; + }; + }; + + pwm_a_x18_pins: pwm_a_x18 { + mux { + groups = "pwm_a_x18"; + function = "pwm_a"; + }; + }; + + pwm_a_x20_pins: pwm_a_x20 { + mux { + groups = "pwm_a_x20"; + function = "pwm_a"; + }; + }; + + pwm_a_z_pins: pwm_a_z { + mux { + groups = "pwm_a_z"; + function = "pwm_a"; + }; + }; + + pwm_b_a_pins: pwm_b_a { + mux { + groups = "pwm_b_a"; + function = "pwm_b"; + }; + }; + + pwm_b_x_pins: pwm_b_x { + mux { + groups = "pwm_b_x"; + function = "pwm_b"; + }; + }; + + pwm_b_z_pins: pwm_b_z { + mux { + groups = "pwm_b_z"; + function = "pwm_b"; + }; + }; + + pwm_c_a_pins: pwm_c_a { + mux { + groups = "pwm_c_a"; + function = "pwm_c"; + }; + }; + + pwm_c_x10_pins: pwm_c_x10 { + mux { + groups = "pwm_c_x10"; + function = "pwm_c"; + }; + }; + + pwm_c_x17_pins: pwm_c_x17 { + mux { + groups = "pwm_c_x17"; + function = "pwm_c"; + }; + }; + + pwm_d_x11_pins: pwm_d_x11 { + mux { + groups = "pwm_d_x11"; + function = "pwm_d"; + }; + }; + + pwm_d_x16_pins: pwm_d_x16 { + mux { + groups = "pwm_d_x16"; + function = "pwm_d"; + }; + }; + + spi0_pins: spi0 { + mux { + groups = "spi0_miso", + "spi0_mosi", + "spi0_clk"; + function = "spi0"; + }; + }; + + spi0_ss0_pins: spi0_ss0 { + mux { + groups = "spi0_ss0"; + function = "spi0"; + }; + }; + + spi0_ss1_pins: spi0_ss1 { + mux { + groups = "spi0_ss1"; + function = "spi0"; + }; + }; + + spi0_ss2_pins: spi0_ss2 { + mux { + groups = "spi0_ss2"; + function = "spi0"; + }; + }; + + + spi1_a_pins: spi1_a { + mux { + groups = "spi1_miso_a", + "spi1_mosi_a", + "spi1_clk_a"; + function = "spi1"; + }; + }; + + spi1_ss0_a_pins: spi1_ss0_a { + mux { + groups = "spi1_ss0_a"; + function = "spi1"; + }; + }; + + spi1_ss1_pins: spi1_ss1 { + mux { + groups = "spi1_ss1"; + function = "spi1"; + }; + }; + + spi1_x_pins: spi1_x { + mux { + groups = "spi1_miso_x", + "spi1_mosi_x", + "spi1_clk_x"; + function = "spi1"; + }; + }; + + spi1_ss0_x_pins: spi1_ss0_x { + mux { + groups = "spi1_ss0_x"; + function = "spi1"; + }; + }; + }; + }; + sram: sram@fffc0000 { compatible = "amlogic,meson-axg-sram", "mmio-sram"; reg = <0x0 0xfffc0000 0x0 0x20000>; @@ -175,18 +465,56 @@ }; }; - aobus: aobus@ff800000 { + aobus: bus@ff800000 { compatible = "simple-bus"; reg = <0x0 0xff800000 0x0 0x100000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-axg-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 15>; + }; + + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; + }; + }; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-axg-ao-pwm"; + reg = <0x0 0x07000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,axg-ao-pwm"; + reg = <0x0 0x02000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -195,10 +523,17 @@ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + ir: ir@8000 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x8000 0x0 0x20>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 7d4b95e49993..aeb6d21a3bec 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -59,6 +59,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index ab7ce1644cdc..6cb3c2a52baf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -211,7 +211,7 @@ #size-cells = <2>; ranges; - cbus: cbus@c1100000 { + cbus: bus@c1100000 { compatible = "simple-bus"; reg = <0x0 0xc1100000 0x0 0x100000>; #address-cells = <2>; @@ -229,7 +229,7 @@ reset: reset-controller@4404 { compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; - reg = <0x0 0x04404 0x0 0x20>; + reg = <0x0 0x04404 0x0 0x9c>; #reset-cells = <1>; }; @@ -366,7 +366,7 @@ }; }; - aobus: aobus@c8100000 { + aobus: bus@c8100000 { compatible = "simple-bus"; reg = <0x0 0xc8100000 0x0 0x100000>; #address-cells = <2>; @@ -377,6 +377,12 @@ compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; reg = <0x0 0x0 0x0 0x100>; + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-gx-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&sysctrl>; + }; + clkc_AO: clock-controller { compatible = "amlogic,meson-gx-aoclkc"; #clock-cells = <1>; @@ -447,13 +453,18 @@ }; }; - hiubus: hiubus@c883c000 { + hiubus: bus@c883c000 { compatible = "simple-bus"; reg = <0x0 0xc883c000 0x0 0x2000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + sysctrl: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; + reg = <0 0 0 0x400>; + }; + mailbox: mailbox@404 { compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; reg = <0 0x404 0 0x4c>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 4a4251001bfd..011e8e08e429 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -169,6 +169,7 @@ /* Realtek RTL8211F (0x001cc916) */ reg = <0>; interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index f8d221463c60..ee4ada61c59c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -135,6 +135,24 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; }; ðmac { @@ -156,8 +174,10 @@ #size-cells = <0>; eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; }; @@ -179,6 +199,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &i2c_A { status = "okay"; pinctrl-0 = <&i2c_a_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 9bf16bb7c491..09f34f7ef084 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -118,6 +118,7 @@ /* Micrel KSZ9031 (0x00221620) */ reg = <3>; interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 1fb8b9d6cb4e..3290a4dc3522 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -694,14 +694,55 @@ }; }; +&pwrc_vpu { + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ +}; + &saradc { compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc"; clocks = <&xtal>, <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SANA>, <&clkc CLKID_SAR_ADC_CLK>, <&clkc CLKID_SAR_ADC_SEL>; - clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; }; &sd_emmc_a { @@ -763,4 +804,5 @@ &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; + power-domains = <&pwrc_vpu>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index dc9c3b8216c2..9671f1e3c74a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -72,6 +72,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index ff09df1fd5a3..7005068346a0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -28,6 +28,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 6524b89e7115..4f355f17eed6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -644,14 +644,55 @@ }; }; +&pwrc_vpu { + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ +}; + &saradc { compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; clocks = <&xtal>, <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SANA>, <&clkc CLKID_SAR_ADC_CLK>, <&clkc CLKID_SAR_ADC_SEL>; - clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; }; &sd_emmc_a { @@ -713,4 +754,5 @@ &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; + power-domains = <&pwrc_vpu>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 34a41b26a4ed..1448c3dba08e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -153,6 +153,18 @@ }; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -232,6 +244,9 @@ external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 66c6da7e112c..388fac4f2d97 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -111,7 +111,8 @@ reg = <0>; max-speed = <1000>; interrupt-parent = <&gpio_intc>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index ec11343dc528..d77b88af9582 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5433 SoC Memory interface and AMBA bus device tree source * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * Chanwoo Choi <cw00.choi@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &soc { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi index 50403700274b..9df7c65593a1 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source * @@ -6,10 +7,6 @@ * * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 297597442c44..a77462da4a36 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG Exynos5433 TM2 board device tree source * @@ -5,10 +6,6 @@ * * Common device tree source file for Samsung's TM2 and TM2E boards * which are based on Samsung Exynos5433 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -741,6 +738,19 @@ }; }; +&hsi2c_4 { + status = "okay"; + + s3fwrn5: nfc@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + interrupt-parent = <&gpa1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; + s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; + }; +}; + &hsi2c_5 { status = "okay"; @@ -756,6 +766,7 @@ &hsi2c_7 { status = "okay"; + clock-frequency = <1000000>; sii8620@39 { reg = <0x39>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 23191eb9397c..3d7e0a782243 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG Exynos5433 TM2 board device tree source * @@ -5,10 +6,6 @@ * * Device tree source file for Samsung's TM2 board which is based on * Samsung Exynos5433 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos5433-tm2-common.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index b73e1231a86f..1e207ce8b97b 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG Exynos5433 TM2E board device tree source * @@ -5,10 +6,6 @@ * * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on * Samsung Exynos5433 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos5433-tm2-common.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi index 9be2978f1b9a..f0803575fd9f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos5433 TMU sensor configuration * * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/thermal/thermal_exynos.h> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi index 125fe58d77ce..cccae662228a 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos5433 TMU sensor configuration * * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/thermal/thermal_exynos.h> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi index ceaa05145b8a..fe3a0b14bee6 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos5433 thermal zone * * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 7fe994b750da..62f276970174 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos5433 SoC device tree source * @@ -10,10 +11,6 @@ * Note: This file does not include device nodes for all the controllers in * Exynos5433 SoC. As device tree coverage for Exynos5433 increases, * additional nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/exynos5433.h> @@ -247,6 +244,24 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x18000000>; + arm_a53_pmu { + compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + arm_a57_pmu { + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; @@ -343,6 +358,7 @@ clocks = <&xxti>, <&cmu_top CLK_ACLK_G2D_266>, <&cmu_top CLK_ACLK_G2D_400>; + power-domains = <&pd_g2d>; }; cmu_disp: clock-controller@13b90000 { @@ -368,6 +384,7 @@ <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, <&cmu_mif CLK_ACLK_DISP_333>; + power-domains = <&pd_disp>; }; cmu_aud: clock-controller@114c0000 { @@ -376,6 +393,7 @@ #clock-cells = <1>; clock-names = "oscclk", "fout_aud_pll"; clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + power-domains = <&pd_aud>; }; cmu_bus0: clock-controller@13600000 { @@ -412,6 +430,7 @@ clock-names = "oscclk", "aclk_g3d_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + power-domains = <&pd_g3d>; }; cmu_gscl: clock-controller@13cf0000 { @@ -425,6 +444,7 @@ clocks = <&xxti>, <&cmu_top CLK_ACLK_GSCL_111>, <&cmu_top CLK_ACLK_GSCL_333>; + power-domains = <&pd_gscl>; }; cmu_apollo: clock-controller@11900000 { @@ -445,7 +465,7 @@ clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; }; - cmu_mscl: clock-controller@105d0000 { + cmu_mscl: clock-controller@150d0000 { compatible = "samsung,exynos5433-cmu-mscl"; reg = <0x150d0000 0x1000>; #clock-cells = <1>; @@ -456,6 +476,7 @@ clocks = <&xxti>, <&cmu_top CLK_SCLK_JPEG_MSCL>, <&cmu_top CLK_ACLK_MSCL_400>; + power-domains = <&pd_mscl>; }; cmu_mfc: clock-controller@15280000 { @@ -465,6 +486,7 @@ clock-names = "oscclk", "aclk_mfc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + power-domains = <&pd_mfc>; }; cmu_hevc: clock-controller@14f80000 { @@ -474,6 +496,7 @@ clock-names = "oscclk", "aclk_hevc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + power-domains = <&pd_hevc>; }; cmu_isp: clock-controller@146d0000 { @@ -487,6 +510,7 @@ clocks = <&xxti>, <&cmu_top CLK_ACLK_ISP_DIS_400>, <&cmu_top CLK_ACLK_ISP_400>; + power-domains = <&pd_isp>; }; cmu_cam0: clock-controller@120d0000 { @@ -502,6 +526,7 @@ <&cmu_top CLK_ACLK_CAM0_333>, <&cmu_top CLK_ACLK_CAM0_400>, <&cmu_top CLK_ACLK_CAM0_552>; + power-domains = <&pd_cam0>; }; cmu_cam1: clock-controller@145d0000 { @@ -523,6 +548,86 @@ <&cmu_top CLK_ACLK_CAM1_333>, <&cmu_top CLK_ACLK_CAM1_400>, <&cmu_top CLK_ACLK_CAM1_552>; + power-domains = <&pd_cam1>; + }; + + pd_gscl: power-domain@105c4000 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4000 0x20>; + #power-domain-cells = <0>; + label = "GSCL"; + }; + + pd_cam0: power-domain@105c4020 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4020 0x20>; + #power-domain-cells = <0>; + power-domains = <&pd_cam1>; + label = "CAM0"; + }; + + pd_mscl: power-domain@105c4040 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4040 0x20>; + #power-domain-cells = <0>; + label = "MSCL"; + }; + + pd_g3d: power-domain@105c4060 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4060 0x20>; + #power-domain-cells = <0>; + label = "G3D"; + }; + + pd_disp: power-domain@105c4080 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4080 0x20>; + #power-domain-cells = <0>; + label = "DISP"; + }; + + pd_cam1: power-domain@105c40a0 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c40a0 0x20>; + #power-domain-cells = <0>; + label = "CAM1"; + }; + + pd_aud: power-domain@105c40c0 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c40c0 0x20>; + #power-domain-cells = <0>; + label = "AUD"; + }; + + pd_g2d: power-domain@105c4120 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4120 0x20>; + #power-domain-cells = <0>; + label = "G2D"; + }; + + pd_isp: power-domain@105c4140 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4140 0x20>; + #power-domain-cells = <0>; + power-domains = <&pd_cam0>; + label = "ISP"; + }; + + pd_mfc: power-domain@105c4180 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c4180 0x20>; + #power-domain-cells = <0>; + label = "MFC"; + }; + + pd_hevc: power-domain@105c41c0 { + compatible = "samsung,exynos5433-pd"; + reg = <0x105c41c0 0x20>; + #power-domain-cells = <0>; + label = "HEVC"; }; tmu_atlas0: tmu@10060000 { @@ -637,6 +742,7 @@ compatible = "samsung,exynos5433-pinctrl"; reg = <0x114b0000 0x1000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_aud>; }; pinctrl_cpif: pinctrl@10fe0000 { @@ -728,6 +834,7 @@ clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk"; + power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, @@ -765,6 +872,7 @@ "aclk_xiu_decon0x", "pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk"; samsung,disp-sysreg = <&syscon_disp>; + power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, @@ -790,6 +898,7 @@ "phyclk_mipidphy0_rxclkesc0", "sclk_rgb_vclk_to_dsim0", "sclk_mipi"; + power-domains = <&pd_disp>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -813,6 +922,7 @@ clocks = <&cmu_disp CLK_PCLK_MIC0>, <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; + power-domains = <&pd_disp>; samsung,disp-syscon = <&syscon_disp>; status = "disabled"; @@ -881,7 +991,7 @@ reg = <0x145f0000 0x1038>; }; - gsc_0: video-scaler@13C00000 { + gsc_0: video-scaler@13c00000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c00000 0x1000>; interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; @@ -892,9 +1002,10 @@ <&cmu_gscl CLK_ACLK_XIU_GSCLX>, <&cmu_gscl CLK_ACLK_GSCLBEND_333>; iommus = <&sysmmu_gscl0>; + power-domains = <&pd_gscl>; }; - gsc_1: video-scaler@13C10000 { + gsc_1: video-scaler@13c10000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c10000 0x1000>; interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; @@ -905,9 +1016,10 @@ <&cmu_gscl CLK_ACLK_XIU_GSCLX>, <&cmu_gscl CLK_ACLK_GSCLBEND_333>; iommus = <&sysmmu_gscl1>; + power-domains = <&pd_gscl>; }; - gsc_2: video-scaler@13C20000 { + gsc_2: video-scaler@13c20000 { compatible = "samsung,exynos5433-gsc"; reg = <0x13c20000 0x1000>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; @@ -918,6 +1030,7 @@ <&cmu_gscl CLK_ACLK_XIU_GSCLX>, <&cmu_gscl CLK_ACLK_GSCLBEND_333>; iommus = <&sysmmu_gscl2>; + power-domains = <&pd_gscl>; }; jpeg: codec@15020000 { @@ -930,9 +1043,10 @@ <&cmu_mscl CLK_ACLK_XIU_MSCLX>, <&cmu_mscl CLK_SCLK_JPEG>; iommus = <&sysmmu_jpeg>; + power-domains = <&pd_mscl>; }; - mfc: codec@152E0000 { + mfc: codec@152e0000 { compatible = "samsung,exynos5433-mfc"; reg = <0x152E0000 0x10000>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; @@ -942,6 +1056,7 @@ <&cmu_mfc CLK_ACLK_XIU_MFCX>; iommus = <&sysmmu_mfc_0>, <&sysmmu_mfc_1>; iommu-names = "left", "right"; + power-domains = <&pd_mfc>; }; sysmmu_decon0x: sysmmu@13a00000 { @@ -951,6 +1066,7 @@ clock-names = "pclk", "aclk"; clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>; + power-domains = <&pd_disp>; #iommu-cells = <0>; }; @@ -962,6 +1078,7 @@ clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, <&cmu_disp CLK_ACLK_SMMU_DECON1X>; #iommu-cells = <0>; + power-domains = <&pd_disp>; }; sysmmu_tv0x: sysmmu@13a20000 { @@ -972,6 +1089,7 @@ clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, <&cmu_disp CLK_ACLK_SMMU_TV0X>; #iommu-cells = <0>; + power-domains = <&pd_disp>; }; sysmmu_tv1x: sysmmu@13a30000 { @@ -982,6 +1100,7 @@ clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, <&cmu_disp CLK_ACLK_SMMU_TV1X>; #iommu-cells = <0>; + power-domains = <&pd_disp>; }; sysmmu_gscl0: sysmmu@13c80000 { @@ -992,6 +1111,7 @@ clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>, <&cmu_gscl CLK_PCLK_SMMU_GSCL0>; #iommu-cells = <0>; + power-domains = <&pd_gscl>; }; sysmmu_gscl1: sysmmu@13c90000 { @@ -1002,6 +1122,7 @@ clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>, <&cmu_gscl CLK_PCLK_SMMU_GSCL1>; #iommu-cells = <0>; + power-domains = <&pd_gscl>; }; sysmmu_gscl2: sysmmu@13ca0000 { @@ -1012,6 +1133,7 @@ clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>, <&cmu_gscl CLK_PCLK_SMMU_GSCL2>; #iommu-cells = <0>; + power-domains = <&pd_gscl>; }; sysmmu_jpeg: sysmmu@15060000 { @@ -1022,6 +1144,7 @@ clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, <&cmu_mscl CLK_ACLK_SMMU_JPEG>; #iommu-cells = <0>; + power-domains = <&pd_mscl>; }; sysmmu_mfc_0: sysmmu@15200000 { @@ -1032,6 +1155,7 @@ clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; #iommu-cells = <0>; + power-domains = <&pd_mfc>; }; sysmmu_mfc_1: sysmmu@15210000 { @@ -1042,6 +1166,7 @@ clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; #iommu-cells = <0>; + power-domains = <&pd_mfc>; }; serial_0: serial@14c10000 { @@ -1497,6 +1622,7 @@ clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; clock-names = "sfr0_ctrl"; samsung,pmu-syscon = <&pmu_system_controller>; + power-domains = <&pd_aud>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1510,6 +1636,7 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + power-domains = <&pd_aud>; }; i2s0: i2s0@11440000 { @@ -1526,6 +1653,7 @@ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + power-domains = <&pd_aud>; status = "disabled"; }; @@ -1538,6 +1666,7 @@ clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; pinctrl-0 = <&uart_aud_bus>; + power-domains = <&pd_aud>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 4a8b1fb51243..22723527e626 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG Exynos7 Espresso board device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos7.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index 8f58850cd28c..472dd649aa7e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos7 SoC pin-mux and pin-config device tree source * @@ -6,11 +7,7 @@ * * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as * device tree nodes in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ #include <dt-bindings/pinctrl/samsung.h> diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi index 1d6dcf2aadba..48494710b7b2 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos7 TMU sensor configuration * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <dt-bindings/thermal/thermal_exynos.h> diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi index 062358355a53..d3301b8bd364 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for default Exynos7 thermal zone definition * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ trips { diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 9a3fbed1765a..ad9dce6894ce 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS7 SoC device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/exynos7-clk.h> @@ -103,7 +100,7 @@ #size-cells = <1>; ranges; - pdma0: pdma@10E10000 { + pdma0: pdma@10e10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10E10000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; @@ -114,7 +111,7 @@ #dma-requests = <32>; }; - pdma1: pdma@10EB0000 { + pdma1: pdma@10eb0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10EB0000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 0f6fcda36b9e..4f17601b919c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -125,3 +125,11 @@ &sata { status = "okay"; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index bd80e9a2e67c..4fc150cd4ca5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -166,6 +166,77 @@ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ }; + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + msi-parent = <&its>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + }; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -191,6 +262,12 @@ clocks = <&sysclk>; }; + dcfg: dcfg@1e00000 { + compatible = "fsl,ls1088a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -394,6 +471,26 @@ status = "disabled"; }; + usb0: usb3@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + + usb1: usb3@3110000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + sata: sata@3200000 { compatible = "fsl,ls1088a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 9a1d0d2ab1c3..5498c705ae6a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -95,6 +95,18 @@ }; }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + i2c@3 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 97d768730952..c6999624ed8a 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -109,6 +109,7 @@ label = "user_led4"; /* gpio_190_user_led4 */ gpios = <&gpio23 6 0>; + panic-indicator; linux,default-trigger = "cpu0"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index ab0b95ba5ae5..63d4f9dca77f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -61,6 +61,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; }; cpu1: cpu@1 { @@ -70,6 +71,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; }; cpu2: cpu@2 { @@ -79,6 +81,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; }; cpu3: cpu@3 { @@ -88,6 +91,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; }; cpu4: cpu@100 { @@ -101,6 +105,7 @@ &CPU_SLEEP &CLUSTER_SLEEP_1 >; + capacity-dmips-mhz = <1024>; }; cpu5: cpu@101 { @@ -114,6 +119,7 @@ &CPU_SLEEP &CLUSTER_SLEEP_1 >; + capacity-dmips-mhz = <1024>; }; cpu6: cpu@102 { @@ -127,6 +133,7 @@ &CPU_SLEEP &CLUSTER_SLEEP_1 >; + capacity-dmips-mhz = <1024>; }; cpu7: cpu@103 { @@ -140,6 +147,7 @@ &CPU_SLEEP &CLUSTER_SLEEP_1 >; + capacity-dmips-mhz = <1024>; }; idle-states { @@ -203,21 +211,25 @@ IRQ_TYPE_LEVEL_HIGH)>; }; - pmu { - compatible = "arm,armv8-pmuv3"; + a53-pmu { + compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, - <&cpu3>, - <&cpu4>, + <&cpu3>; + }; + + a73-pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index a6fd13389f8d..4d5d644abb12 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -146,6 +146,12 @@ status = "okay"; }; +&sd0 { + bus-width = <4>; + cap-sd-highspeed; + status = "okay"; +}; + &spi0 { status = "okay"; label = "LS-SPI0"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 75865f8a862a..962bd79139e4 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -192,6 +192,18 @@ status = "disabled"; }; + sd0: mmc@9820000 { + compatible = "snps,dw-mshc"; + reg = <0x9820000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_SDIO0_CIU_CLK>, + <&crg HISTB_SDIO0_BIU_CLK>; + clock-names = "ciu", "biu"; + resets = <&crg 0x9c 4>; + reset-names = "reset"; + status = "disabled"; + }; + emmc: mmc@9830000 { compatible = "snps,dw-mshc"; reg = <0x9830000 0x10000>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 3aee6123d161..e94fa1a53192 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -359,6 +359,7 @@ user_led1 { label = "user_led1"; gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */ + panic-indicator; linux,default-trigger = "cpu0"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index 59d7557d3b1b..2554e0baea6b 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -56,6 +56,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53","arm,armv8"; reg = <0x1>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 90c26d616a54..375026867342 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -65,6 +65,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; @@ -234,6 +235,12 @@ }; }; + nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", + "syscon"; + reg = <0x14000 0x60>; + }; + pinctrl_sb: pinctrl@18800 { compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; @@ -309,6 +316,20 @@ }; }; + crypto: crypto@90000 { + compatible = "inside-secure,safexcel-eip97"; + reg = <0x90000 0x20000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clocks = <&nb_periph_clk 15>; + }; + sdhci1: sdhci@d0000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 52b5341cb270..3ae05eee2c9a 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -61,7 +61,13 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus { + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + }; + + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "usb3h0-vbus"; regulator-min-microvolt = <5000000>; @@ -70,7 +76,7 @@ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; }; - cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus { + cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { compatible = "regulator-fixed"; regulator-name = "usb3h1-vbus"; regulator-min-microvolt = <5000000>; @@ -79,14 +85,14 @@ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; }; - cpm_usb3_0_phy: cpm-usb3-0-phy { + cp0_usb3_0_phy: cp0-usb3-0-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_0_vbus>; + vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cpm_usb3_1_phy: cpm-usb3-1-phy { + cp0_usb3_1_phy: cp0-usb3-1-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_1_vbus>; + vcc-supply = <&cp0_reg_usb3_1_vbus>; }; }; @@ -129,11 +135,11 @@ }; -&cpm_pcie2 { +&cp0_pcie2 { status = "okay"; }; -&cpm_i2c0 { +&cp0_i2c0 { status = "okay"; clock-frequency = <100000>; @@ -156,7 +162,7 @@ }; }; -&cpm_nand { +&cp0_nand { /* * SPI on CPM and NAND have common pins on this board. We can * use only one at a time. To enable the NAND (whihch will @@ -186,7 +192,7 @@ }; -&cpm_spi1 { +&cp0_spi1 { status = "okay"; spi-flash@0 { @@ -214,17 +220,17 @@ }; }; -&cpm_sata0 { +&cp0_sata0 { status = "okay"; }; -&cpm_usb3_0 { - usb-phy = <&cpm_usb3_0_phy>; +&cp0_usb3_0 { + usb-phy = <&cp0_usb3_0_phy>; status = "okay"; }; -&cpm_usb3_1 { - usb-phy = <&cpm_usb3_1_phy>; +&cp0_usb3_1 { + usb-phy = <&cp0_usb3_1_phy>; status = "okay"; }; @@ -235,14 +241,14 @@ non-removable; }; -&cpm_sdhci0 { +&cp0_sdhci0 { status = "okay"; bus-width = <4>; no-1-8-v; cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>; }; -&cpm_mdio { +&cp0_mdio { status = "okay"; phy0: ethernet-phy@0 { @@ -253,28 +259,28 @@ }; }; -&cpm_ethernet { +&cp0_ethernet { status = "okay"; }; -&cpm_eth0 { +&cp0_eth0 { status = "okay"; /* Network PHY */ phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ - phys = <&cpm_comphy2 0>; + phys = <&cp0_comphy2 0>; }; -&cpm_eth1 { +&cp0_eth1 { status = "okay"; /* Network PHY */ phy = <&phy0>; phy-mode = "sgmii"; /* Generic PHY, providing serdes lanes */ - phys = <&cpm_comphy0 1>; + phys = <&cp0_comphy0 1>; }; -&cpm_eth2 { +&cp0_eth2 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index 0e1a1e5be399..f63b4fbd642b 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -44,25 +44,46 @@ * Device Tree file for the Armada 70x0 SoC */ -#include "armada-cp110-master.dtsi" - / { aliases { - gpio1 = &cpm_gpio1; - gpio2 = &cpm_gpio2; + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; }; }; -&cpm_gpio1 { +/* + * Instantiate the CP110 + */ +#define CP110_NAME cp0 +#define CP110_BASE f2000000 +#define CP110_PCIE_IO_BASE 0xf9000000 +#define CP110_PCIE_MEM_BASE 0xf6000000 +#define CP110_PCIE0_BASE f2600000 +#define CP110_PCIE1_BASE f2620000 +#define CP110_PCIE2_BASE f2640000 + +#include "armada-cp110.dtsi" + +#undef CP110_NAME +#undef CP110_BASE +#undef CP110_PCIE_IO_BASE +#undef CP110_PCIE_MEM_BASE +#undef CP110_PCIE0_BASE +#undef CP110_PCIE1_BASE +#undef CP110_PCIE2_BASE + +&cp0_gpio1 { status = "okay"; }; -&cpm_gpio2 { +&cp0_gpio2 { status = "okay"; }; -&cpm_syscon0 { - cpm_pinctrl: pinctrl { +&cp0_syscon0 { + cp0_pinctrl: pinctrl { compatible = "marvell,armada-7k-pinctrl"; nand_pins: nand-pins { diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi index 0ba0bc942598..3318d6b0214b 100644 --- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -60,6 +60,6 @@ * oscillator so this one is let enabled. */ -&cpm_rtc { +&cp0_rtc { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index d97b72bed662..dba55baff20f 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -61,46 +61,53 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus { + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth2; + ethernet2 = &cp1_eth0; + ethernet3 = &cp1_eth1; + }; + + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { compatible = "regulator-fixed"; - regulator-name = "cpm-usb3h0-vbus"; + regulator-name = "cp0-usb3h0-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; }; - cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus { + cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { compatible = "regulator-fixed"; - regulator-name = "cpm-usb3h1-vbus"; + regulator-name = "cp0-usb3h1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; }; - cpm_usb3_0_phy: cpm-usb3-0-phy { + cp0_usb3_0_phy: cp0-usb3-0-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_0_vbus>; + vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cpm_usb3_1_phy: cpm-usb3-1-phy { + cp0_usb3_1_phy: cp0-usb3-1-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_1_vbus>; + vcc-supply = <&cp0_reg_usb3_1_vbus>; }; - cps_reg_usb3_0_vbus: cps-usb3-0-vbus { + cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { compatible = "regulator-fixed"; - regulator-name = "cps-usb3h0-vbus"; + regulator-name = "cp1-usb3h0-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander1 0 GPIO_ACTIVE_HIGH>; }; - cps_usb3_0_phy: cps-usb3-0-phy { + cp1_usb3_0_phy: cp1-usb3-0-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cps_reg_usb3_0_vbus>; + vcc-supply = <&cp1_reg_usb3_0_vbus>; }; }; @@ -144,16 +151,16 @@ }; /* CON6 on CP0 expansion */ -&cpm_pcie0 { +&cp0_pcie0 { status = "okay"; }; /* CON5 on CP0 expansion */ -&cpm_pcie2 { +&cp0_pcie2 { status = "okay"; }; -&cpm_i2c0 { +&cp0_i2c0 { status = "okay"; clock-frequency = <100000>; @@ -178,23 +185,23 @@ }; /* CON4 on CP0 expansion */ -&cpm_sata0 { +&cp0_sata0 { status = "okay"; }; /* CON9 on CP0 expansion */ -&cpm_usb3_0 { - usb-phy = <&cpm_usb3_0_phy>; +&cp0_usb3_0 { + usb-phy = <&cp0_usb3_0_phy>; status = "okay"; }; /* CON10 on CP0 expansion */ -&cpm_usb3_1 { - usb-phy = <&cpm_usb3_1_phy>; +&cp0_usb3_1 { + usb-phy = <&cp0_usb3_1_phy>; status = "okay"; }; -&cpm_mdio { +&cp0_mdio { status = "okay"; phy1: ethernet-phy@1 { @@ -202,42 +209,42 @@ }; }; -&cpm_ethernet { +&cp0_ethernet { status = "okay"; }; -&cpm_eth0 { +&cp0_eth0 { status = "okay"; phy-mode = "10gbase-kr"; }; -&cpm_eth2 { +&cp0_eth2 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; }; /* CON6 on CP1 expansion */ -&cps_pcie0 { +&cp1_pcie0 { status = "okay"; }; /* CON7 on CP1 expansion */ -&cps_pcie1 { +&cp1_pcie1 { status = "okay"; }; /* CON5 on CP1 expansion */ -&cps_pcie2 { +&cp1_pcie2 { status = "okay"; }; -&cps_i2c0 { +&cp1_i2c0 { status = "okay"; clock-frequency = <100000>; }; -&cps_spi1 { +&cp1_spi1 { status = "okay"; spi-flash@0 { @@ -268,23 +275,51 @@ }; }; +/* + * Proper NAND usage will require DPR-76 to be in position 1-2, which disables + * MDIO signal of CP1. + */ +&cp1_nand { + num-cs = <1>; + pinctrl-0 = <&nand_pins>, <&nand_rb>; + pinctrl-names = "default"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-enable-arbiter; + marvell,system-controller = <&cp1_syscon0>; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; +}; + /* CON4 on CP1 expansion */ -&cps_sata0 { +&cp1_sata0 { status = "okay"; }; /* CON9 on CP1 expansion */ -&cps_usb3_0 { - usb-phy = <&cps_usb3_0_phy>; +&cp1_usb3_0 { + usb-phy = <&cp1_usb3_0_phy>; status = "okay"; }; /* CON10 on CP1 expansion */ -&cps_usb3_1 { +&cp1_usb3_1 { status = "okay"; }; -&cps_mdio { +&cp1_mdio { status = "okay"; phy0: ethernet-phy@0 { @@ -292,16 +327,16 @@ }; }; -&cps_ethernet { +&cp1_ethernet { status = "okay"; }; -&cps_eth0 { +&cp1_eth0 { status = "okay"; phy-mode = "10gbase-kr"; }; -&cps_eth1 { +&cp1_eth1 { status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; @@ -313,7 +348,7 @@ non-removable; }; -&cpm_sdhci0 { +&cp0_sdhci0 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index b3350827ee55..626e9d0462c3 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -62,6 +62,12 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp1_eth0; + ethernet2 = &cp1_eth1; + }; + /* Regulator labels correspond with schematics */ v_3_3: regulator-3-3v { compatible = "regulator-fixed"; @@ -84,9 +90,9 @@ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { compatible = "regulator-fixed"; enable-active-high; - gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cpm_xhci_vbus_pins>; + pinctrl-0 = <&cp0_xhci_vbus_pins>; regulator-name = "v_5v0_usb3_hst_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -120,17 +126,17 @@ vqmmc-supply = <&v_vddo_h>; }; -&cpm_i2c0 { +&cp0_i2c0 { clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&cpm_i2c0_pins>; + pinctrl-0 = <&cp0_i2c0_pins>; status = "okay"; }; -&cpm_i2c1 { +&cp0_i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&cpm_i2c1_pins>; + pinctrl-0 = <&cp0_i2c1_pins>; status = "okay"; i2c-switch@70 { @@ -157,9 +163,9 @@ }; }; -&cpm_mdio { +&cp0_mdio { pinctrl-names = "default"; - pinctrl-0 = <&cpm_ge_mdio_pins>; + pinctrl-0 = <&cp0_ge_mdio_pins>; status = "okay"; ge_phy: ethernet-phy@0 { @@ -167,44 +173,44 @@ }; }; -&cpm_pcie0 { +&cp0_pcie0 { pinctrl-names = "default"; - pinctrl-0 = <&cpm_pcie_pins>; + pinctrl-0 = <&cp0_pcie_pins>; num-lanes = <4>; num-viewport = <8>; - reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>; + reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; status = "okay"; }; -&cpm_pinctrl { - cpm_ge_mdio_pins: ge-mdio-pins { +&cp0_pinctrl { + cp0_ge_mdio_pins: ge-mdio-pins { marvell,pins = "mpp32", "mpp34"; marvell,function = "ge"; }; - cpm_i2c1_pins: i2c1-pins { + cp0_i2c1_pins: i2c1-pins { marvell,pins = "mpp35", "mpp36"; marvell,function = "i2c1"; }; - cpm_i2c0_pins: i2c0-pins { + cp0_i2c0_pins: i2c0-pins { marvell,pins = "mpp37", "mpp38"; marvell,function = "i2c0"; }; - cpm_xhci_vbus_pins: xhci0-vbus-pins { + cp0_xhci_vbus_pins: xhci0-vbus-pins { marvell,pins = "mpp47"; marvell,function = "gpio"; }; - cpm_pcie_pins: pcie-pins { + cp0_pcie_pins: pcie-pins { marvell,pins = "mpp52"; marvell,function = "gpio"; }; - cpm_sdhci_pins: sdhci-pins { + cp0_sdhci_pins: sdhci-pins { marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", "mpp60", "mpp61"; marvell,function = "sdio"; }; }; -&cpm_xmdio { +&cp0_xmdio { status = "okay"; phy0: ethernet-phy@0 { @@ -218,83 +224,83 @@ }; }; -&cpm_ethernet { +&cp0_ethernet { status = "okay"; }; -&cpm_eth0 { +&cp0_eth0 { status = "okay"; /* Network PHY */ phy = <&phy0>; phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ - phys = <&cpm_comphy4 0>; + phys = <&cp0_comphy4 0>; }; -&cpm_sata0 { +&cp0_sata0 { /* CPM Lane 0 - U29 */ status = "okay"; }; -&cpm_sdhci0 { +&cp0_sdhci0 { /* U6 */ broken-cd; bus-width = <4>; pinctrl-names = "default"; - pinctrl-0 = <&cpm_sdhci_pins>; + pinctrl-0 = <&cp0_sdhci_pins>; status = "okay"; vqmmc-supply = <&v_3_3>; }; -&cpm_usb3_0 { +&cp0_usb3_0 { /* J38? - USB2.0 only */ status = "okay"; }; -&cpm_usb3_1 { +&cp0_usb3_1 { /* J38? - USB2.0 only */ status = "okay"; }; -&cps_ethernet { +&cp1_ethernet { status = "okay"; }; -&cps_eth0 { +&cp1_eth0 { status = "okay"; /* Network PHY */ phy = <&phy8>; phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ - phys = <&cps_comphy4 0>; + phys = <&cp1_comphy4 0>; }; -&cps_eth1 { +&cp1_eth1 { /* CPS Lane 0 - J5 (Gigabit RJ45) */ status = "okay"; /* Network PHY */ phy = <&ge_phy>; phy-mode = "sgmii"; /* Generic PHY, providing serdes lanes */ - phys = <&cps_comphy0 1>; + phys = <&cp1_comphy0 1>; }; -&cps_pinctrl { - cps_spi1_pins: spi1-pins { +&cp1_pinctrl { + cp1_spi1_pins: spi1-pins { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; marvell,function = "spi1"; }; }; -&cps_sata0 { +&cp1_sata0 { /* CPS Lane 1 - U32 */ /* CPS Lane 3 - U31 */ status = "okay"; }; -&cps_spi1 { +&cp1_spi1 { pinctrl-names = "default"; - pinctrl-0 = <&cps_spi1_pins>; + pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; spi-flash@0 { @@ -304,7 +310,7 @@ }; }; -&cps_usb3_0 { +&cp1_usb3_0 { /* CPS Lane 2 - CON7 */ usb-phy = <&usb3h0_phy>; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 60fe84f5cbcc..83d2b40e5981 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -59,6 +59,6 @@ * disable it. However, the RTC clock in CP slave is connected to the * oscillator so this one is let enabled. */ -&cpm_rtc { +&cp0_rtc { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index 666ebe96ba0d..e9c84a1d3c4d 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -44,33 +44,104 @@ * Device Tree file for the Armada 80x0 SoC family */ -#include "armada-cp110-master.dtsi" -#include "armada-cp110-slave.dtsi" - / { aliases { - gpio1 = &cps_gpio1; - gpio2 = &cpm_gpio2; + gpio1 = &cp1_gpio1; + gpio2 = &cp0_gpio2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + spi3 = &cp1_spi0; + spi4 = &cp1_spi1; }; }; +/* + * Instantiate the master CP110 + */ +#define CP110_NAME cp0 +#define CP110_BASE f2000000 +#define CP110_PCIE_IO_BASE 0xf9000000 +#define CP110_PCIE_MEM_BASE 0xf6000000 +#define CP110_PCIE0_BASE f2600000 +#define CP110_PCIE1_BASE f2620000 +#define CP110_PCIE2_BASE f2640000 + +#include "armada-cp110.dtsi" + +#undef CP110_NAME +#undef CP110_BASE +#undef CP110_PCIE_IO_BASE +#undef CP110_PCIE_MEM_BASE +#undef CP110_PCIE0_BASE +#undef CP110_PCIE1_BASE +#undef CP110_PCIE2_BASE + +/* + * Instantiate the slave CP110 + */ +#define CP110_NAME cp1 +#define CP110_BASE f4000000 +#define CP110_PCIE_IO_BASE 0xfd000000 +#define CP110_PCIE_MEM_BASE 0xfa000000 +#define CP110_PCIE0_BASE f4600000 +#define CP110_PCIE1_BASE f4620000 +#define CP110_PCIE2_BASE f4640000 + +#include "armada-cp110.dtsi" + +#undef CP110_NAME +#undef CP110_BASE +#undef CP110_PCIE_IO_BASE +#undef CP110_PCIE_MEM_BASE +#undef CP110_PCIE0_BASE +#undef CP110_PCIE1_BASE +#undef CP110_PCIE2_BASE + /* The 80x0 has two CP blocks, but uses only one block from each. */ -&cps_gpio1 { +&cp1_gpio1 { status = "okay"; }; -&cpm_gpio2 { +&cp0_gpio2 { status = "okay"; }; -&cpm_syscon0 { - cpm_pinctrl: pinctrl { +&cp0_syscon0 { + cp0_pinctrl: pinctrl { compatible = "marvell,armada-8k-cpm-pinctrl"; }; }; -&cps_syscon0 { - cps_pinctrl: pinctrl { +&cp1_syscon0 { + cp1_pinctrl: pinctrl { compatible = "marvell,armada-8k-cps-pinctrl"; + + nand_pins: nand-pins { + marvell,pins = + "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11", + "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp13", "mpp12"; + marvell,function = "nf"; + }; }; }; + +&cp1_crypto { + /* + * The cryptographic engine found on the cp110 + * master is enabled by default at the SoC + * level. Because it is not possible as of now + * to enable two cryptographic engines in + * parallel, disable this one by default. + */ + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 1c4dd8ab9ad5..f9b66b81f9fc 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -58,6 +58,7 @@ serial0 = &uart0; serial1 = &uart1; gpio0 = &ap_gpio; + spi0 = &spi0; }; psci { @@ -203,7 +204,6 @@ reg = <0x510600 0x50>; #address-cells = <1>; #size-cells = <0>; - cell-index = <0>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ap_clk 3>; status = "disabled"; @@ -241,7 +241,7 @@ }; - watchdog: watchdog@600000 { + watchdog: watchdog@610000 { compatible = "arm,sbsa-gwdt"; reg = <0x610000 0x1000>, <0x600000 0x1000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -285,6 +285,12 @@ gpio-ranges = <&ap_pinctrl 0 0 20>; }; }; + + ap_thermal: thermal@6f808c { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x6f808c 0x4>, + <0x6f8084 0x8>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi new file mode 100644 index 000000000000..c6dd1d81c68d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + */ + +/* Common definitions used by Armada 7K/8K DTs */ +#define PASTER(x, y) x ## y +#define EVALUATOR(x, y) PASTER(x, y) +#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) +#define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi deleted file mode 100644 index 9c7724e82aff..000000000000 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ /dev/null @@ -1,446 +0,0 @@ -/* - * Copyright (C) 2016 Marvell Technology Group Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Device Tree file for Marvell Armada CP110 Master. - */ - -#define ICU_GRP_NSR 0x0 - -/ { - cp110-master { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&cpm_icu>; - ranges; - - config-space@f2000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 0xf2000000 0x2000000>; - - cpm_ethernet: ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, - <&cpm_clk 1 5>, <&cpm_clk 1 18>; - clock-names = "pp_clk", "gop_clk", - "mg_clk","axi_clk"; - marvell,system-controller = <&cpm_syscon0>; - status = "disabled"; - dma-coherent; - - cpm_eth0: eth0 { - interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <0>; - gop-port-id = <0>; - status = "disabled"; - }; - - cpm_eth1: eth1 { - interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <1>; - gop-port-id = <2>; - status = "disabled"; - }; - - cpm_eth2: eth2 { - interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <2>; - gop-port-id = <3>; - status = "disabled"; - }; - }; - - cpm_comphy: phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&cpm_syscon0>; - #address-cells = <1>; - #size-cells = <0>; - - cpm_comphy0: phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - cpm_comphy1: phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - cpm_comphy2: phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - - cpm_comphy3: phy@3 { - reg = <3>; - #phy-cells = <1>; - }; - - cpm_comphy4: phy@4 { - reg = <4>; - #phy-cells = <1>; - }; - - cpm_comphy5: phy@5 { - reg = <5>; - #phy-cells = <1>; - }; - }; - - cpm_mdio: mdio@12a200 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x12a200 0x10>; - clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>, - <&cpm_clk 1 6>, <&cpm_clk 1 18>; - status = "disabled"; - }; - - cpm_xmdio: mdio@12a600 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,xmdio"; - reg = <0x12a600 0x10>; - status = "disabled"; - }; - - cpm_icu: interrupt-controller@1e0000 { - compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; - #interrupt-cells = <3>; - interrupt-controller; - msi-parent = <&gicp>; - }; - - cpm_rtc: rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; - }; - - cpm_syscon0: system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x2000>; - - cpm_clk: clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - cpm_gpio1: gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&cpm_pinctrl 0 0 32>; - interrupt-controller; - interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - cpm_gpio2: gpio@140 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x140>; - ngpios = <31>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&cpm_pinctrl 0 32 31>; - interrupt-controller; - interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - }; - - cpm_usb3_0: usb3@500000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x500000 0x4000>; - dma-coherent; - interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 22>; - status = "disabled"; - }; - - cpm_usb3_1: usb3@510000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x510000 0x4000>; - dma-coherent; - interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 23>; - status = "disabled"; - }; - - cpm_sata0: sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 15>; - status = "disabled"; - }; - - cpm_xor0: xor@6a0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6a0000 0x1000>, - <0x6b0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clocks = <&cpm_clk 1 8>; - }; - - cpm_xor1: xor@6c0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6c0000 0x1000>, - <0x6d0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clocks = <&cpm_clk 1 7>; - }; - - cpm_spi0: spi@700600 { - compatible = "marvell,armada-380-spi"; - reg = <0x700600 0x50>; - #address-cells = <0x1>; - #size-cells = <0x0>; - cell-index = <1>; - clocks = <&cpm_clk 1 21>; - status = "disabled"; - }; - - cpm_spi1: spi@700680 { - compatible = "marvell,armada-380-spi"; - reg = <0x700680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <2>; - clocks = <&cpm_clk 1 21>; - status = "disabled"; - }; - - cpm_i2c0: i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 21>; - status = "disabled"; - }; - - cpm_i2c1: i2c@701100 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 21>; - status = "disabled"; - }; - - cpm_nand: nand@720000 { - /* - * Due to the limiation of the pin available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ - compatible = "marvell,armada-8k-nand", - "marvell,armada370-nand"; - reg = <0x720000 0x54>; - #address-cells = <1>; - #size-cells = <1>; - interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 2>; - marvell,system-controller = <&cpm_syscon0>; - status = "disabled"; - }; - - cpm_trng: trng@760000 { - compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; - reg = <0x760000 0x7d>; - interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_clk 1 25>; - status = "okay"; - }; - - cpm_sdhci0: sdhci@780000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0x780000 0x300>; - interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core","axi"; - clocks = <&cpm_clk 1 4>, <&cpm_clk 1 18>; - dma-coherent; - status = "disabled"; - }; - - cpm_crypto: crypto@800000 { - compatible = "inside-secure,safexcel-eip197"; - reg = <0x800000 0x200000>; - interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; - clocks = <&cpm_clk 1 26>; - dma-coherent; - }; - }; - - cpm_pcie0: pcie@f2600000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf2600000 0 0x10000>, - <0 0xf6f00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clocks = <&cpm_clk 1 13>; - status = "disabled"; - }; - - cpm_pcie1: pcie@f2620000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf2620000 0 0x10000>, - <0 0xf7f00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xf9010000 0 0xf9010000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clocks = <&cpm_clk 1 11>; - status = "disabled"; - }; - - cpm_pcie2: pcie@f2640000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf2640000 0 0x10000>, - <0 0xf8f00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xf9020000 0 0xf9020000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clocks = <&cpm_clk 1 12>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi deleted file mode 100644 index 87ac68b2cf37..000000000000 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ /dev/null @@ -1,444 +0,0 @@ -/* - * Copyright (C) 2016 Marvell Technology Group Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Device Tree file for Marvell Armada CP110 Slave. - */ - -#define ICU_GRP_NSR 0x0 - -/ { - cp110-slave { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&cps_icu>; - ranges; - - config-space@f4000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 0xf4000000 0x2000000>; - - cps_ethernet: ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, - <&cps_clk 1 5>, <&cps_clk 1 18>; - clock-names = "pp_clk", "gop_clk", - "mg_clk", "axi_clk"; - marvell,system-controller = <&cps_syscon0>; - status = "disabled"; - dma-coherent; - - cps_eth0: eth0 { - interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <0>; - gop-port-id = <0>; - status = "disabled"; - }; - - cps_eth1: eth1 { - interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <1>; - gop-port-id = <2>; - status = "disabled"; - }; - - cps_eth2: eth2 { - interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; - port-id = <2>; - gop-port-id = <3>; - status = "disabled"; - }; - }; - - cps_comphy: phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&cps_syscon0>; - #address-cells = <1>; - #size-cells = <0>; - - cps_comphy0: phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - cps_comphy1: phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - cps_comphy2: phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - - cps_comphy3: phy@3 { - reg = <3>; - #phy-cells = <1>; - }; - - cps_comphy4: phy@4 { - reg = <4>; - #phy-cells = <1>; - }; - - cps_comphy5: phy@5 { - reg = <5>; - #phy-cells = <1>; - }; - }; - - cps_mdio: mdio@12a200 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x12a200 0x10>; - clocks = <&cps_clk 1 9>, <&cps_clk 1 5>, - <&cps_clk 1 6>, <&cps_clk 1 18>; - status = "disabled"; - }; - - cps_xmdio: mdio@12a600 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,xmdio"; - reg = <0x12a600 0x10>; - status = "disabled"; - }; - - cps_icu: interrupt-controller@1e0000 { - compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; - #interrupt-cells = <3>; - interrupt-controller; - msi-parent = <&gicp>; - }; - - cps_rtc: rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; - }; - - cps_syscon0: system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x2000>; - - cps_clk: clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - cps_gpio1: gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&cps_pinctrl 0 0 32>; - interrupt-controller; - interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - cps_gpio2: gpio@140 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x140>; - ngpios = <31>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&cps_pinctrl 0 32 31>; - interrupt-controller; - interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - }; - - cps_usb3_0: usb3@500000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x500000 0x4000>; - dma-coherent; - interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 22>; - status = "disabled"; - }; - - cps_usb3_1: usb3@510000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x510000 0x4000>; - dma-coherent; - interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 23>; - status = "disabled"; - }; - - cps_sata0: sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 15>; - status = "disabled"; - }; - - cps_xor0: xor@6a0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6a0000 0x1000>, - <0x6b0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clocks = <&cps_clk 1 8>; - }; - - cps_xor1: xor@6c0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6c0000 0x1000>, - <0x6d0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clocks = <&cps_clk 1 7>; - }; - - cps_spi0: spi@700600 { - compatible = "marvell,armada-380-spi"; - reg = <0x700600 0x50>; - #address-cells = <0x1>; - #size-cells = <0x0>; - cell-index = <3>; - clocks = <&cps_clk 1 21>; - status = "disabled"; - }; - - cps_spi1: spi@700680 { - compatible = "marvell,armada-380-spi"; - reg = <0x700680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <4>; - clocks = <&cps_clk 1 21>; - status = "disabled"; - }; - - cps_i2c0: i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 21>; - status = "disabled"; - }; - - cps_i2c1: i2c@701100 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 21>; - status = "disabled"; - }; - - cps_nand: nand@720000 { - /* - * Due to the limiation of the pin available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ - compatible = "marvell,armada370-nand", - "marvell,armada370-nand"; - reg = <0x720000 0x54>; - #address-cells = <1>; - #size-cells = <1>; - interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 2>; - status = "disabled"; - }; - - cps_trng: trng@760000 { - compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; - reg = <0x760000 0x7d>; - interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_clk 1 25>; - status = "okay"; - }; - - cps_crypto: crypto@800000 { - compatible = "inside-secure,safexcel-eip197"; - reg = <0x800000 0x200000>; - interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; - clocks = <&cps_clk 1 26>; - dma-coherent; - /* - * The cryptographic engine found on the cp110 - * master is enabled by default at the SoC - * level. Because it is not possible as of now - * to enable two cryptographic engines in - * parallel, disable this one by default. - */ - status = "disabled"; - }; - }; - - cps_pcie0: pcie@f4600000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf4600000 0 0x10000>, - <0 0xfaf00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xfd000000 0 0xfd000000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clocks = <&cps_clk 1 13>; - status = "disabled"; - }; - - cps_pcie1: pcie@f4620000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf4620000 0 0x10000>, - <0 0xfbf00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xfd010000 0 0xfd010000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clocks = <&cps_clk 1 11>; - status = "disabled"; - }; - - cps_pcie2: pcie@f4640000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf4640000 0 0x10000>, - <0 0xfcf00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 0xfd020000 0 0xfd020000 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clocks = <&cps_clk 1 12>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi new file mode 100644 index 000000000000..a8af4136dbe7 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + */ + +/* + * Device Tree file for Marvell Armada CP110. + */ + +#include <dt-bindings/interrupt-controller/mvebu-icu.h> + +#include "armada-common.dtsi" + +#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000)) +#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000)) +#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000) + +/ { + /* + * The contents of the node are defined below, in order to + * save one indentation level + */ + CP110_NAME: CP110_NAME { }; +}; + +&CP110_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&CP110_LABEL(icu)>; + ranges; + + config-space@CP110_BASE { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>; + + CP110_LABEL(ethernet): ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>, + <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "axi_clk"; + marvell,system-controller = <&CP110_LABEL(syscon0)>; + status = "disabled"; + dma-coherent; + + CP110_LABEL(eth0): eth0 { + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared", "link"; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + CP110_LABEL(eth1): eth1 { + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared", "link"; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + CP110_LABEL(eth2): eth2 { + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", + "tx-cpu3", "rx-shared", "link"; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + CP110_LABEL(comphy): phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&CP110_LABEL(syscon0)>; + #address-cells = <1>; + #size-cells = <0>; + + CP110_LABEL(comphy0): phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy1): phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy2): phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy3): phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy4): phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + CP110_LABEL(comphy5): phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + + CP110_LABEL(mdio): mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>, + <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP110_LABEL(xmdio): mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + status = "disabled"; + }; + + CP110_LABEL(icu): interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x10>; + #interrupt-cells = <3>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP110_LABEL(rtc): rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; + }; + + CP110_LABEL(thermal): thermal@400078 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x400078 0x4>, + <0x400070 0x8>; + }; + + CP110_LABEL(syscon0): system-controller@440000 { + compatible = "syscon", "simple-mfd"; + reg = <0x440000 0x2000>; + + CP110_LABEL(clk): clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + CP110_LABEL(gpio1): gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; + interrupt-controller; + interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + CP110_LABEL(gpio2): gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; + interrupt-controller; + interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + CP110_LABEL(usb3_0): usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 22>; + status = "disabled"; + }; + + CP110_LABEL(usb3_1): usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 23>; + status = "disabled"; + }; + + CP110_LABEL(sata0): sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 15>; + status = "disabled"; + }; + + CP110_LABEL(xor0): xor@6a0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clocks = <&CP110_LABEL(clk) 1 8>; + }; + + CP110_LABEL(xor1): xor@6c0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clocks = <&CP110_LABEL(clk) 1 7>; + }; + + CP110_LABEL(spi0): spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&CP110_LABEL(clk) 1 21>; + status = "disabled"; + }; + + CP110_LABEL(spi1): spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&CP110_LABEL(clk) 1 21>; + status = "disabled"; + }; + + CP110_LABEL(i2c0): i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 21>; + status = "disabled"; + }; + + CP110_LABEL(i2c1): i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 21>; + status = "disabled"; + }; + + CP110_LABEL(nand): nand@720000 { + /* + * Due to the limitation of the pins available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada-8k-nand", + "marvell,armada370-nand"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 2>; + marvell,system-controller = <&CP110_LABEL(syscon0)>; + status = "disabled"; + }; + + CP110_LABEL(trng): trng@760000 { + compatible = "marvell,armada-8k-rng", + "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP110_LABEL(clk) 1 25>; + status = "okay"; + }; + + CP110_LABEL(sdhci0): sdhci@780000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0x780000 0x300>; + interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "axi"; + clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; + dma-coherent; + status = "disabled"; + }; + + CP110_LABEL(crypto): crypto@800000 { + compatible = "inside-secure,safexcel-eip197"; + reg = <0x800000 0x200000>; + interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clocks = <&CP110_LABEL(clk) 1 26>; + dma-coherent; + }; + }; + + CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>, + <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clocks = <&CP110_LABEL(clk) 1 13>; + status = "disabled"; + }; + + CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>, + <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&CP110_LABEL(clk) 1 11>; + status = "disabled"; + }; + + CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>, + <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&CP110_LABEL(clk) 1 12>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 8c804df3da4e..10f9c76cd105 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -24,6 +24,33 @@ chosen { stdout-path = "serial0:921600n8"; }; + + cpus_fixed_vproc0: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vproc_buck0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + cpus_fixed_vproc1: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vproc_buck1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + +}; + +&cpu0 { + proc-supply = <&cpus_fixed_vproc0>; +}; + +&cpu1 { + proc-supply = <&cpus_fixed_vproc0>; +}; + +&cpu2 { + proc-supply = <&cpus_fixed_vproc1>; }; &uart0 { diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 5d4e406bb35d..fdf66f4fe7c3 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -5,8 +5,10 @@ * SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +#include <dt-bindings/clock/mt2712-clk.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/mt2712-power.h> / { compatible = "mediatek,mt2712"; @@ -14,6 +16,48 @@ #address-cells = <2>; #size-cells = <2>; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp00 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1000000>; + }; + opp01 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <1000000>; + }; + opp02 { + opp-hz = /bits/ 64 <793000000>; + opp-microvolt = <1000000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp00 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1000000>; + }; + opp01 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <1000000>; + }; + opp02 { + opp-hz = /bits/ 64 <793000000>; + opp-microvolt = <1000000>; + }; + opp03 { + opp-hz = /bits/ 64 <897000000>; + opp-microvolt = <1000000>; + }; + opp04 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <1000000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -39,6 +83,11 @@ device_type = "cpu"; compatible = "arm,cortex-a35"; reg = <0x000>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_F_MP0_PLL1>; + clock-names = "cpu", "intermediate"; + proc-supply = <&cpus_fixed_vproc0>; + operating-points-v2 = <&cluster0_opp>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; @@ -47,6 +96,11 @@ compatible = "arm,cortex-a35"; reg = <0x001>; enable-method = "psci"; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_F_MP0_PLL1>; + clock-names = "cpu", "intermediate"; + proc-supply = <&cpus_fixed_vproc0>; + operating-points-v2 = <&cluster0_opp>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; @@ -55,6 +109,11 @@ compatible = "arm,cortex-a72"; reg = <0x200>; enable-method = "psci"; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_F_BIG_PLL1>; + clock-names = "cpu", "intermediate"; + proc-supply = <&cpus_fixed_vproc1>; + operating-points-v2 = <&cluster1_opp>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; @@ -98,6 +157,48 @@ #clock-cells = <0>; }; + clk26m: oscillator@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator@1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + clkfpc: oscillator@2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "clkfpc"; + }; + + clkaud_ext_i_0: oscillator@3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <6500000>; + clock-output-names = "clkaud_ext_i_0"; + }; + + clkaud_ext_i_1: oscillator@4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <196608000>; + clock-output-names = "clkaud_ext_i_1"; + }; + + clkaud_ext_i_2: oscillator@5 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <180633600>; + clock-output-names = "clkaud_ext_i_2"; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -111,6 +212,39 @@ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>; }; + topckgen: syscon@10000000 { + compatible = "mediatek,mt2712-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt2712-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt2712-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + + scpsys: scpsys@10006000 { + compatible = "mediatek,mt2712-scpsys", "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MFG_SEL>, + <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_JPGDEC_SEL>, + <&topckgen CLK_TOP_A1SYS_HP_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>; + clock-names = "mm", "mfg", "venc", + "jpgdec", "audio", "vdec"; + infracfg = <&infracfg>; + }; + uart5: serial@1000f000 { compatible = "mediatek,mt2712-uart", "mediatek,mt6577-uart"; @@ -121,6 +255,18 @@ status = "disabled"; }; + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt2712-apmixedsys", "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + + mcucfg: syscon@10220000 { + compatible = "mediatek,mt2712-mcucfg", "syscon"; + reg = <0 0x10220000 0 0x1000>; + #clock-cells = <1>; + }; + sysirq: interrupt-controller@10220a80 { compatible = "mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq"; @@ -192,5 +338,47 @@ clock-names = "baud", "bus"; status = "disabled"; }; + + mfgcfg: syscon@13000000 { + compatible = "mediatek,mt2712-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt2712-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt2712-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + bdpsys: syscon@15010000 { + compatible = "mediatek,mt2712-bdpsys", "syscon"; + reg = <0 0x15010000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt2712-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: syscon@18000000 { + compatible = "mediatek,mt2712-vencsys", "syscon"; + reg = <0 0x18000000 0 0x1000>; + #clock-cells = <1>; + }; + + jpgdecsys: syscon@19000000 { + compatible = "mediatek,mt2712-jpgdecsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 0acba1f4e04e..8e6ada20e6db 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -74,6 +74,24 @@ status = "okay"; }; +&cpu0 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu1 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + +&cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + &dpi0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 9263d9f99aec..9fbe4705ee88 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -51,6 +51,80 @@ mdp_wrot1 = &mdp_wrot1; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <859000>; + }; + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <908000>; + }; + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <983000>; + }; + opp-1105000000 { + opp-hz = /bits/ 64 <1105000000>; + opp-microvolt = <1009000>; + }; + opp-1209000000 { + opp-hz = /bits/ 64 <1209000000>; + opp-microvolt = <1034000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1057000>; + }; + opp-1508000000 { + opp-hz = /bits/ 64 <1508000000>; + opp-microvolt = <1109000>; + }; + opp-1703000000 { + opp-hz = /bits/ 64 <1703000000>; + opp-microvolt = <1125000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp-507000000 { + opp-hz = /bits/ 64 <507000000>; + opp-microvolt = <828000>; + }; + opp-702000000 { + opp-hz = /bits/ 64 <702000000>; + opp-microvolt = <867000>; + }; + opp-1001000000 { + opp-hz = /bits/ 64 <1001000000>; + opp-microvolt = <927000>; + }; + opp-1209000000 { + opp-hz = /bits/ 64 <1209000000>; + opp-microvolt = <968000>; + }; + opp-1404000000 { + opp-hz = /bits/ 64 <1404000000>; + opp-microvolt = <1007000>; + }; + opp-1612000000 { + opp-hz = /bits/ 64 <1612000000>; + opp-microvolt = <1049000>; + }; + opp-1807000000 { + opp-hz = /bits/ 64 <1807000000>; + opp-microvolt = <1089000>; + }; + opp-2106000000 { + opp-hz = /bits/ 64 <2106000000>; + opp-microvolt = <1125000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -81,6 +155,11 @@ reg = <0x000>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + #cooling-cells = <2>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { @@ -89,6 +168,10 @@ reg = <0x001>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@100 { @@ -97,6 +180,11 @@ reg = <0x100>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + #cooling-cells = <2>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; }; cpu3: cpu@101 { @@ -105,6 +193,10 @@ reg = <0x101>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; }; idle-states { diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 42a23997dcdb..bd5305a634b1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -74,6 +74,43 @@ }; }; + host1x@13e00000 { + status = "okay"; + + dpaux@15040000 { + status = "okay"; + }; + + display-hub@15200000 { + status = "okay"; + }; + + dsi@15300000 { + status = "disabled"; + }; + + sor@15540000 { + status = "disabled"; + + nvidia,dpaux = <&dpaux1>; + }; + + sor@15580000 { + status = "okay"; + + avdd-io-supply = <&vdd_hdmi_1v05>; + vdd-pll-supply = <&vdd_1v8_ap>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_MAIN_GPIO(P, 1) GPIO_ACTIVE_LOW>; + }; + + dpaux@155c0000 { + status = "okay"; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -120,5 +157,19 @@ vin-supply = <&vdd_3v3_sys>; }; + + vdd_hdmi: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 54f418d05e15..a8baad7b80df 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -51,6 +51,10 @@ }; }; + memory-controller@2c00000 { + status = "okay"; + }; + serial@3100000 { status = "okay"; }; @@ -73,7 +77,7 @@ status = "okay"; }; - i2c@3190000 { + ddc: i2c@3190000 { status = "okay"; }; @@ -88,7 +92,7 @@ /* SDMMC1 (SD/MMC) */ sdhci@3400000 { cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; vqmmc-supply = <&vddio_sdmmc1>; }; @@ -317,7 +321,7 @@ regulator-max-microvolt = <2800000>; }; - avdd_1v05: ldo7 { + vdd_hdmi_1v05: ldo7 { regulator-name = "VDD_HDMI_1V05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 46d1f287fb0f..b762227f6aa1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/gpio/tegra186-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> +#include <dt-bindings/memory/tegra186-mc.h> #include <dt-bindings/power/tegra186-powergate.h> #include <dt-bindings/reset/tegra186-reset.h> #include <dt-bindings/thermal/tegra186-bpmp-thermal.h> @@ -13,6 +14,12 @@ #address-cells = <2>; #size-cells = <2>; + misc@100000 { + compatible = "nvidia,tegra186-misc"; + reg = <0x0 0x00100000 0x0 0xf000>, + <0x0 0x0010f000 0x0 0x1000>; + }; + gpio: gpio@2200000 { compatible = "nvidia,tegra186-gpio"; reg-names = "security", "gpio"; @@ -61,6 +68,12 @@ snps,rxpbl = <8>; }; + memory-controller@2c00000 { + compatible = "nvidia,tegra186-mc"; + reg = <0x0 0x02c00000 0x0 0xb0000>; + status = "disabled"; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; reg = <0x0 0x03100000 0x0 0x40>; @@ -259,6 +272,13 @@ status = "disabled"; }; + fuse@3820000 { + compatible = "nvidia,tegra186-efuse"; + reg = <0x0 0x03820000 0x0 0x10000>; + clocks = <&bpmp TEGRA186_CLK_FUSE>; + clock-names = "fuse"; + }; + gic: interrupt-controller@3881000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -437,6 +457,79 @@ }; }; + smmu: iommu@12000000 { + compatible = "arm,mmu-500"; + reg = <0 0x12000000 0 0x800000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + stream-match-mask = <0x7f80>; + #global-interrupts = <1>; + #iommu-cells = <1>; + }; + host1x@13e00000 { compatible = "nvidia,tegra186-host1x", "simple-bus"; reg = <0x0 0x13e00000 0x0 0x10000>, @@ -453,6 +546,129 @@ #size-cells = <1>; ranges = <0x15000000 0x0 0x15000000 0x01000000>; + iommus = <&smmu TEGRA186_SID_HOST1X>; + + dpaux1: dpaux@15040000 { + compatible = "nvidia,tegra186-dpaux"; + reg = <0x15040000 0x10000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DPAUX1>, + <&bpmp TEGRA186_CLK_PLLDP>; + clock-names = "dpaux", "parent"; + resets = <&bpmp TEGRA186_RESET_DPAUX1>; + reset-names = "dpaux"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + + state_dpaux1_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux1_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux1_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + display-hub@15200000 { + compatible = "nvidia,tegra186-display", "simple-bus"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>; + reset-names = "misc", "wgrp0", "wgrp1", "wgrp2", + "wgrp3", "wgrp4", "wgrp5"; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>, + <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>, + <&bpmp TEGRA186_CLK_NVDISPLAYHUB>; + clock-names = "disp", "dsc", "hub"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x15200000 0x15200000 0x40000>; + + display@15200000 { + compatible = "nvidia,tegra186-dc"; + reg = <0x15200000 0x10000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>; + clock-names = "dc"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + iommus = <&smmu TEGRA186_SID_NVDISPLAY>; + + nvidia,outputs = <&dsia &dsib &sor0 &sor1>; + nvidia,head = <0>; + }; + + display@15210000 { + compatible = "nvidia,tegra186-dc"; + reg = <0x15210000 0x10000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>; + clock-names = "dc"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>; + iommus = <&smmu TEGRA186_SID_NVDISPLAY>; + + nvidia,outputs = <&dsia &dsib &sor0 &sor1>; + nvidia,head = <1>; + }; + + display@15220000 { + compatible = "nvidia,tegra186-dc"; + reg = <0x15220000 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>; + clock-names = "dc"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>; + iommus = <&smmu TEGRA186_SID_NVDISPLAY>; + + nvidia,outputs = <&sor0 &sor1>; + nvidia,head = <2>; + }; + }; + + dsia: dsi@15300000 { + compatible = "nvidia,tegra186-dsi"; + reg = <0x15300000 0x10000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DSI>, + <&bpmp TEGRA186_CLK_DSIA_LP>, + <&bpmp TEGRA186_CLK_PLLD>; + clock-names = "dsi", "lp", "parent"; + resets = <&bpmp TEGRA186_RESET_DSI>; + reset-names = "dsi"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + }; vic@15340000 { compatible = "nvidia,tegra186-vic"; @@ -465,6 +681,141 @@ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>; }; + + dsib: dsi@15400000 { + compatible = "nvidia,tegra186-dsi"; + reg = <0x15400000 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DSIB>, + <&bpmp TEGRA186_CLK_DSIB_LP>, + <&bpmp TEGRA186_CLK_PLLD>; + clock-names = "dsi", "lp", "parent"; + resets = <&bpmp TEGRA186_RESET_DSIB>; + reset-names = "dsi"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + }; + + sor0: sor@15540000 { + compatible = "nvidia,tegra186-sor"; + reg = <0x15540000 0x10000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_SOR0>, + <&bpmp TEGRA186_CLK_SOR0_OUT>, + <&bpmp TEGRA186_CLK_PLLD2>, + <&bpmp TEGRA186_CLK_PLLDP>, + <&bpmp TEGRA186_CLK_SOR_SAFE>, + <&bpmp TEGRA186_CLK_SOR0_PAD_CLKOUT>; + clock-names = "sor", "out", "parent", "dp", "safe", + "pad"; + resets = <&bpmp TEGRA186_RESET_SOR0>; + reset-names = "sor"; + pinctrl-0 = <&state_dpaux_aux>; + pinctrl-1 = <&state_dpaux_i2c>; + pinctrl-2 = <&state_dpaux_off>; + pinctrl-names = "aux", "i2c", "off"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + nvidia,interface = <0>; + }; + + sor1: sor@15580000 { + compatible = "nvidia,tegra186-sor1"; + reg = <0x15580000 0x10000>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_SOR1>, + <&bpmp TEGRA186_CLK_SOR1_OUT>, + <&bpmp TEGRA186_CLK_PLLD3>, + <&bpmp TEGRA186_CLK_PLLDP>, + <&bpmp TEGRA186_CLK_SOR_SAFE>, + <&bpmp TEGRA186_CLK_SOR1_PAD_CLKOUT>; + clock-names = "sor", "out", "parent", "dp", "safe", + "pad"; + resets = <&bpmp TEGRA186_RESET_SOR1>; + reset-names = "sor"; + pinctrl-0 = <&state_dpaux1_aux>; + pinctrl-1 = <&state_dpaux1_i2c>; + pinctrl-2 = <&state_dpaux1_off>; + pinctrl-names = "aux", "i2c", "off"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + nvidia,interface = <1>; + }; + + dpaux: dpaux@155c0000 { + compatible = "nvidia,tegra186-dpaux"; + reg = <0x155c0000 0x10000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DPAUX>, + <&bpmp TEGRA186_CLK_PLLDP>; + clock-names = "dpaux", "parent"; + resets = <&bpmp TEGRA186_RESET_DPAUX>; + reset-names = "dpaux"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + + state_dpaux_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + padctl@15880000 { + compatible = "nvidia,tegra186-dsi-padctl"; + reg = <0x15880000 0x10000>; + resets = <&bpmp TEGRA186_RESET_DSI>; + reset-names = "dsi"; + status = "disabled"; + }; + + dsic: dsi@15900000 { + compatible = "nvidia,tegra186-dsi"; + reg = <0x15900000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DSIC>, + <&bpmp TEGRA186_CLK_DSIC_LP>, + <&bpmp TEGRA186_CLK_PLLD>; + clock-names = "dsi", "lp", "parent"; + resets = <&bpmp TEGRA186_RESET_DSIC>; + reset-names = "dsi"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + }; + + dsid: dsi@15940000 { + compatible = "nvidia,tegra186-dsi"; + reg = <0x15940000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DSID>, + <&bpmp TEGRA186_CLK_DSID_LP>, + <&bpmp TEGRA186_CLK_PLLD>; + clock-names = "dsi", "lp", "parent"; + resets = <&bpmp TEGRA186_RESET_DSID>; + reset-names = "dsi"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + }; }; gpu@17000000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index d10d4430537a..212e6634c9ba 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -297,6 +297,29 @@ }; }; + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + regulators { vdd_gpu: regulator@100 { compatible = "pwm-regulator"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi index be6066ff97c9..d0dc03923723 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi @@ -52,4 +52,27 @@ clock-frequency = <32768>; }; }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 9bdf19f2cca7..9c2402108772 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -266,11 +266,11 @@ reg = <0x0 0x54580000 0x0 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SOR1>, - <&tegra_car TEGRA210_CLK_SOR1_SRC>, + <&tegra_car TEGRA210_CLK_SOR1_OUT>, <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>, <&tegra_car TEGRA210_CLK_PLL_DP>, <&tegra_car TEGRA210_CLK_SOR_SAFE>; - clock-names = "sor", "source", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 183>; reset-names = "sor"; pinctrl-0 = <&state_dpaux1_aux>; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 33a3297eb284..9ff848792712 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -324,6 +324,7 @@ label = "apq8016-sbc:green:user4"; gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; + panic-indicator; default-state = "off"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 4cb0b5834143..390a2fa28514 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -278,7 +278,7 @@ pinconf { pins = "gpio6", "gpio7"; drive-strength = <16>; - bias-disable = <0>; + bias-disable; }; }; @@ -290,7 +290,7 @@ pinconf { pins = "gpio6", "gpio7"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -302,7 +302,7 @@ pinconf { pins = "gpio14", "gpio15"; drive-strength = <16>; - bias-disable = <0>; + bias-disable; }; }; @@ -314,7 +314,7 @@ pinconf { pins = "gpio14", "gpio15"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -326,7 +326,7 @@ pinconf { pins = "gpio22", "gpio23"; drive-strength = <16>; - bias-disable = <0>; + bias-disable; }; }; @@ -338,32 +338,7 @@ pinconf { pins = "gpio22", "gpio23"; drive-strength = <2>; - bias-disable = <0>; - }; - }; - - sdhc2_cd_pin { - sdc2_cd_on: cd_on { - pinmux { - function = "gpio"; - pins = "gpio38"; - }; - pinconf { - pins = "gpio38"; - drive-strength = <2>; - bias-pull-up; - }; - }; - sdc2_cd_off: cd_off { - pinmux { - function = "gpio"; - pins = "gpio38"; - }; - pinconf { - pins = "gpio38"; - drive-strength = <2>; - bias-disable; - }; + bias-disable; }; }; @@ -505,26 +480,25 @@ }; }; - ext-codec-lines { - ext_codec_lines_act: lines_on { + pmx_sdc2_cd_pin { + sdc2_cd_on: cd_on { pinmux { function = "gpio"; - pins = "gpio67"; + pins = "gpio38"; }; pinconf { - pins = "gpio67"; - drive-strength = <8>; - bias-disable; - output-high; + pins = "gpio38"; + drive-strength = <2>; + bias-pull-up; }; }; - ext_codec_lines_sus: lines_off { + sdc2_cd_off: cd_off { pinmux { function = "gpio"; - pins = "gpio67"; + pins = "gpio38"; }; pinconf { - pins = "gpio67"; + pins = "gpio38"; drive-strength = <2>; bias-disable; }; @@ -687,34 +661,16 @@ }; }; cdc_dmic_lines_sus: dmic_lines_off { - pinconf { - pins = "gpio0", "gpio1"; - drive-strength = <2>; - bias-disable; - }; - }; - }; - - cross-conn-det { - cross_conn_det_act: lines_on { - pinmux { - function = "gpio"; - pins = "gpio120"; - }; - pinconf { - pins = "gpio120"; - drive-strength = <8>; - output-low; - bias-pull-down; + pinmux_dmic0_clk { + function = "dmic0_clk"; + pins = "gpio0"; }; - }; - cross_conn_det_sus: lines_off { - pinmux { - function = "gpio"; - pins = "gpio120"; + pinmux_dmic0_data { + function = "dmic0_data"; + pins = "gpio1"; }; pinconf { - pins = "gpio120"; + pins = "gpio0", "gpio1"; drive-strength = <2>; bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 6b2127a6ced1..e51b04900726 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -355,7 +355,7 @@ blsp_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b5000 0x600>; + reg = <0x078b5000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -372,7 +372,7 @@ blsp_spi2: spi@78b6000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b6000 0x600>; + reg = <0x078b6000 0x500>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -389,7 +389,7 @@ blsp_spi3: spi@78b7000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b7000 0x600>; + reg = <0x078b7000 0x500>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -406,7 +406,7 @@ blsp_spi4: spi@78b8000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b8000 0x600>; + reg = <0x078b8000 0x500>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -423,7 +423,7 @@ blsp_spi5: spi@78b9000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b9000 0x600>; + reg = <0x078b9000 0x500>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -440,7 +440,7 @@ blsp_spi6: spi@78ba000 { compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078ba000 0x600>; + reg = <0x078ba000 0x500>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -457,10 +457,10 @@ blsp_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b6000 0x1000>; + reg = <0x078b6000 0x500>; interrupts = <GIC_SPI 96 0>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_default>; @@ -472,10 +472,10 @@ blsp_i2c4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b8000 0x1000>; + reg = <0x078b8000 0x500>; interrupts = <GIC_SPI 98 0>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; @@ -487,10 +487,10 @@ blsp_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78ba000 0x1000>; + reg = <0x078ba000 0x500>; interrupts = <GIC_SPI 100 0>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c6_default>; @@ -906,6 +906,7 @@ "dsi_phy_regulator"; #clock-cells = <1>; + #phy-cells = <0>; clocks = <&gcc GCC_MDSS_AHB_CLK>; clock-names = "iface_clk"; @@ -1435,8 +1436,8 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 0 13>; - qcom,ipc-6 = <&apcs 0 19>; + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-3 = <&apcs 8 19>; apps_smsm: apps@0 { reg = <0>; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 0223e60d8b6a..196b1c0ceb9b 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -97,47 +97,45 @@ #address-cells = <1>; #size-cells = <0>; - wcd_codec: codec@f000 { - compatible = "qcom,pm8916-wcd-analog-codec"; - reg = <0xf000 0x200>; - reg-names = "pmic-codec-core"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - interrupt-parent = <&spmi_bus>; - interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, - <0x1 0xf0 0x1 IRQ_TYPE_NONE>, - <0x1 0xf0 0x2 IRQ_TYPE_NONE>, - <0x1 0xf0 0x3 IRQ_TYPE_NONE>, - <0x1 0xf0 0x4 IRQ_TYPE_NONE>, - <0x1 0xf0 0x5 IRQ_TYPE_NONE>, - <0x1 0xf0 0x6 IRQ_TYPE_NONE>, - <0x1 0xf0 0x7 IRQ_TYPE_NONE>, - <0x1 0xf1 0x0 IRQ_TYPE_NONE>, - <0x1 0xf1 0x1 IRQ_TYPE_NONE>, - <0x1 0xf1 0x2 IRQ_TYPE_NONE>, - <0x1 0xf1 0x3 IRQ_TYPE_NONE>, - <0x1 0xf1 0x4 IRQ_TYPE_NONE>, - <0x1 0xf1 0x5 IRQ_TYPE_NONE>; - interrupt-names = "cdc_spk_cnp_int", - "cdc_spk_clip_int", - "cdc_spk_ocp_int", - "mbhc_ins_rem_det1", - "mbhc_but_rel_det", - "mbhc_but_press_det", - "mbhc_ins_rem_det", - "mbhc_switch_int", - "cdc_ear_ocp_int", - "cdc_hphr_ocp_int", - "cdc_hphl_ocp_det", - "cdc_ear_cnp_int", - "cdc_hphr_cnp_int", - "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; - #sound-dai-cells = <1>; - - }; - + wcd_codec: codec@f000 { + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000 0x200>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 646198d82903..2186d0193b73 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -6,5 +6,6 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb +dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index 3f7d5f51e428..7f2a3d923f21 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the Salvator-X board + * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x * * Copyright (C) 2015 Renesas Electronics Corp. * diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 655dd30639c5..26769a11a190 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -21,6 +21,26 @@ status = "disabled"; }; + /delete-node/ mmu@febe0000; + /delete-node/ mmu@fe980000; + /delete-node/ mmu@fd960000; + /delete-node/ mmu@fd970000; + + ipmmu_mp1: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xec680000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + #iommu-cells = <1>; + }; + + ipmmu_sy: mmu@e7730000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe7730000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + #iommu-cells = <1>; + status = "disabled"; + }; + /delete-node/ usb-phy@ee0e0200; /delete-node/ usb@ee0e0100; /delete-node/ usb@ee0e0000; @@ -35,6 +55,7 @@ clocks = <&cpg CPG_MOD 613>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 613>; + iommus = <&ipmmu_vp0 2>; }; vspi2: vsp@fe9c0000 { @@ -54,6 +75,7 @@ clocks = <&cpg CPG_MOD 609>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 609>; + iommus = <&ipmmu_vp0 10>; }; vspd3: vsp@fea38000 { @@ -73,6 +95,7 @@ clocks = <&cpg CPG_MOD 600>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 600>; + iommus = <&ipmmu_vi0 11>; }; fdp1@fe948000 { @@ -86,6 +109,68 @@ }; }; +&gpio1 { + gpio-ranges = <&pfc 0 32 28>; +}; + +&ipmmu_vi0 { + renesas,ipmmu-main = <&ipmmu_mm 11>; +}; + +&ipmmu_vp0 { + renesas,ipmmu-main = <&ipmmu_mm 12>; +}; + +&ipmmu_vc0 { + renesas,ipmmu-main = <&ipmmu_mm 9>; +}; + +&ipmmu_vc1 { + renesas,ipmmu-main = <&ipmmu_mm 10>; +}; + +&ipmmu_rt { + renesas,ipmmu-main = <&ipmmu_mm 7>; +}; + +&audma0 { + iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, + <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, + <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, + <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, + <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, + <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, + <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, + <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; +}; + +&audma1 { + iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, + <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, + <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, + <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, + <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, + <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, + <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, + <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; +}; + +&fcpvb1 { + iommus = <&ipmmu_vp0 7>; +}; + +&fcpf1 { + iommus = <&ipmmu_vp0 1>; +}; + +&fcpvi1 { + iommus = <&ipmmu_vp0 9>; +}; + +&fcpvd2 { + iommus = <&ipmmu_vi0 10>; +}; + &du { vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 17953070f38d..af467419266a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the Salvator-X board + * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0 * * Copyright (C) 2015 Renesas Electronics Corp. * diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index 7675de5d4f2c..8b50ceb746e8 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the Salvator-X 2nd version board + * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0 * * Copyright (C) 2015-2017 Renesas Electronics Corp. * diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 15ef292a8d9f..d12df6f2ff09 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -30,11 +30,6 @@ i2c7 = &i2c_dvfs; }; - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -184,6 +179,35 @@ clock-frequency = <0>; }; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>, + <&a57_2>, + <&a57_3>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, + <&a53_1>, + <&a53_2>, + <&a53_3>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -240,7 +264,7 @@ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; - gpio-ranges = <&pfc 0 32 28>; + gpio-ranges = <&pfc 0 32 29>; #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 911>; @@ -338,42 +362,6 @@ resets = <&cpg 905>; }; - pmu_a57 { - compatible = "arm,cortex-a57-pmu"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a57_0>, - <&a57_1>, - <&a57_2>, - <&a57_3>; - }; - - pmu_a53 { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a53_0>, - <&a53_1>, - <&a53_2>, - <&a53_3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; - }; - cpg: clock-controller@e6150000 { compatible = "renesas,r8a7795-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -421,6 +409,146 @@ resets = <&cpg 407>; }; + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi1: mmu@febe0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfebe0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 15>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A7795_PD_A3VP>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vp1: mmu@fe980000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfe980000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 17>; + power-domains = <&sysc R8A7795_PD_A3VP>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A7795_PD_A3VC>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vc1: mmu@fe6f0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfe6f0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 13>; + power-domains = <&sysc R8A7795_PD_A3VC>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv2: mmu@fd960000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfd960000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv3: mmu@fd970000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfd970000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A7795_PD_A3IR>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp0: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; @@ -453,6 +581,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -487,6 +623,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -521,6 +665,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; audma0: dma-controller@ec700000 { @@ -555,6 +707,14 @@ resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>, + <&ipmmu_mp0 2>, <&ipmmu_mp0 3>, + <&ipmmu_mp0 4>, <&ipmmu_mp0 5>, + <&ipmmu_mp0 6>, <&ipmmu_mp0 7>, + <&ipmmu_mp0 8>, <&ipmmu_mp0 9>, + <&ipmmu_mp0 10>, <&ipmmu_mp0 11>, + <&ipmmu_mp0 12>, <&ipmmu_mp0 13>, + <&ipmmu_mp0 14>, <&ipmmu_mp0 15>; }; audma1: dma-controller@ec720000 { @@ -589,6 +749,14 @@ resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>, + <&ipmmu_mp0 18>, <&ipmmu_mp0 19>, + <&ipmmu_mp0 20>, <&ipmmu_mp0 21>, + <&ipmmu_mp0 22>, <&ipmmu_mp0 23>, + <&ipmmu_mp0 24>, <&ipmmu_mp0 25>, + <&ipmmu_mp0 26>, <&ipmmu_mp0 27>, + <&ipmmu_mp0 28>, <&ipmmu_mp0 29>, + <&ipmmu_mp0 30>, <&ipmmu_mp0 31>; }; avb: ethernet@e6800000 { @@ -631,6 +799,7 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii-txid"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1459,6 +1628,20 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 815>; status = "disabled"; + iommus = <&ipmmu_hc 2>; + }; + + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a7795-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; }; xhci0: usb@ee000000 { @@ -1539,7 +1722,8 @@ }; sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7795"; + compatible = "renesas,sdhi-r8a7795", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -1550,7 +1734,8 @@ }; sdhi1: sd@ee120000 { - compatible = "renesas,sdhi-r8a7795"; + compatible = "renesas,sdhi-r8a7795", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 313>; @@ -1561,7 +1746,8 @@ }; sdhi2: sd@ee140000 { - compatible = "renesas,sdhi-r8a7795"; + compatible = "renesas,sdhi-r8a7795", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -1572,7 +1758,8 @@ }; sdhi3: sd@ee160000 { - compatible = "renesas,sdhi-r8a7795"; + compatible = "renesas,sdhi-r8a7795", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; @@ -1873,6 +2060,7 @@ clocks = <&cpg CPG_MOD 606>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 606>; + iommus = <&ipmmu_vp1 7>; }; fcpf0: fcp@fe950000 { @@ -1881,6 +2069,7 @@ clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 615>; + iommus = <&ipmmu_vp0 0>; }; fcpf1: fcp@fe951000 { @@ -1889,6 +2078,7 @@ clocks = <&cpg CPG_MOD 614>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 614>; + iommus = <&ipmmu_vp1 1>; }; vspbd: vsp@fe960000 { @@ -1908,6 +2098,7 @@ clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; }; vspi0: vsp@fe9a0000 { @@ -1927,6 +2118,7 @@ clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; }; vspi1: vsp@fe9b0000 { @@ -1946,6 +2138,7 @@ clocks = <&cpg CPG_MOD 610>; power-domains = <&sysc R8A7795_PD_A3VP>; resets = <&cpg 610>; + iommus = <&ipmmu_vp1 9>; }; vspd0: vsp@fea20000 { @@ -1965,6 +2158,7 @@ clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; }; vspd1: vsp@fea28000 { @@ -1984,6 +2178,7 @@ clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; }; vspd2: vsp@fea30000 { @@ -2003,6 +2198,7 @@ clocks = <&cpg CPG_MOD 601>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 601>; + iommus = <&ipmmu_vi1 10>; }; fdp1@fe940000 { @@ -2136,49 +2332,78 @@ #thermal-sensor-cells = <1>; status = "okay"; }; + }; - thermal-zones { - sensor_thermal1: sensor-thermal1 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 0>; + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>; + }; - trips { - sensor1_crit: sensor1-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; }; }; + }; - sensor_thermal2: sensor-thermal2 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 1>; + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; - trips { - sensor2_crit: sensor2-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; }; }; + }; - sensor_thermal3: sensor-thermal3 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 2>; + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; - trips { - sensor3_crit: sensor3-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; }; }; }; }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index b317be03306e..498c9e807dc4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the Salvator-X board + * Device Tree Source for the Salvator-X board with R-Car M3-W * * Copyright (C) 2016 Renesas Electronics Corp. * diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts new file mode 100644 index 000000000000..2c37055efa94 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts @@ -0,0 +1,58 @@ +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W + * + * Copyright (C) 2015-2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7796.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a7796"; + compatible = "renesas,salvator-xs", "renesas,r8a7796"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 727>, + <&versaclock6 1>, + <&x21_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; +}; + +&hdmi0_con { + remote-endpoint = <&rcar_dw_hdmi0_out>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index f2b2e40c655e..c5192d513d7d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -30,9 +30,34 @@ i2c7 = &i2c_dvfs; }; - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; }; cpus { @@ -122,34 +147,32 @@ clock-frequency = <0>; }; - /* - * The external audio clocks are configured as 0 Hz fixed frequency - * clocks by default. - * Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; }; /* External SCIF clock - to be overridden by boards that provide it */ @@ -159,13 +182,6 @@ clock-frequency = <0>; }; - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -190,18 +206,6 @@ resets = <&cpg 408>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; - }; - wdt0: watchdog@e6020000 { compatible = "renesas,r8a7796-wdt", "renesas,rcar-gen3-wdt"; @@ -337,24 +341,98 @@ reg = <0 0xe6060000 0 0x50c>; }; - pmu_a57 { - compatible = "arm,cortex-a57-pmu"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a57_0>, - <&a57_1>; + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A7796_PD_A3VC>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv1: mmu@fd950000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A7796_PD_A3IR>; + #iommu-cells = <1>; + status = "disabled"; }; - pmu_a53 { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a53_0>, - <&a53_1>, - <&a53_2>, - <&a53_3>; + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a7796"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #iommu-cells = <1>; }; cpg: clock-controller@e6150000 { @@ -817,6 +895,7 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii-txid"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1101,6 +1180,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -1135,6 +1222,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -1169,6 +1264,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; audma0: dma-controller@ec700000 { @@ -1203,6 +1306,14 @@ resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; }; audma1: dma-controller@ec720000 { @@ -1237,6 +1348,14 @@ resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>, + <&ipmmu_mp 18>, <&ipmmu_mp 19>, + <&ipmmu_mp 20>, <&ipmmu_mp 21>, + <&ipmmu_mp 22>, <&ipmmu_mp 23>, + <&ipmmu_mp 24>, <&ipmmu_mp 25>, + <&ipmmu_mp 26>, <&ipmmu_mp 27>, + <&ipmmu_mp 28>, <&ipmmu_mp 29>, + <&ipmmu_mp 30>, <&ipmmu_mp 31>; }; usb_dmac0: dma-controller@e65a0000 { @@ -1284,6 +1403,19 @@ status = "disabled"; }; + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a7796-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a7796", "renesas,rcar-gen3-xhci"; @@ -1380,7 +1512,8 @@ }; sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7796"; + compatible = "renesas,sdhi-r8a7796", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; @@ -1391,7 +1524,8 @@ }; sdhi1: sd@ee120000 { - compatible = "renesas,sdhi-r8a7796"; + compatible = "renesas,sdhi-r8a7796", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 313>; @@ -1402,7 +1536,8 @@ }; sdhi2: sd@ee140000 { - compatible = "renesas,sdhi-r8a7796"; + compatible = "renesas,sdhi-r8a7796", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; @@ -1413,7 +1548,8 @@ }; sdhi3: sd@ee160000 { - compatible = "renesas,sdhi-r8a7796"; + compatible = "renesas,sdhi-r8a7796", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; @@ -1438,50 +1574,6 @@ status = "okay"; }; - thermal-zones { - sensor_thermal1: sensor-thermal1 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 0>; - - trips { - sensor1_crit: sensor1-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - sensor_thermal2: sensor-thermal2 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 1>; - - trips { - sensor2_crit: sensor2-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - sensor_thermal3: sensor-thermal3 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 2>; - - trips { - sensor3_crit: sensor3-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required @@ -1679,10 +1771,12 @@ }; pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; /* placeholder */ }; pciec1: pcie@ee800000 { + reg = <0 0xee800000 0 0x80000>; /* placeholder */ }; @@ -1740,6 +1834,7 @@ clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A7796_PD_A3VC>; resets = <&cpg 611>; + iommus = <&ipmmu_vc0 19>; }; vspd0: vsp@fea20000 { @@ -1759,6 +1854,7 @@ clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; }; vspd1: vsp@fea28000 { @@ -1778,6 +1874,7 @@ clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; }; vspd2: vsp@fea30000 { @@ -1797,6 +1894,7 @@ clocks = <&cpg CPG_MOD 601>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 601>; + iommus = <&ipmmu_vi0 10>; }; hdmi0: hdmi@fead0000 { @@ -1884,4 +1982,69 @@ resets = <&cpg 822>; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index a711e77cc6a5..8fe5c193e049 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -33,6 +33,17 @@ }; }; +&avb { + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + }; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -41,17 +52,11 @@ clock-frequency = <32768>; }; -&scif0 { +&rwdt { + timeout-sec = <60>; status = "okay"; }; -&avb { - renesas,no-ether-link; - phy-handle = <&phy0>; +&scif0 { status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts new file mode 100644 index 000000000000..8624ca87d6b2 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -0,0 +1,55 @@ +/* + * Device Tree Source for the V3M Starter Kit board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a77970.dtsi" + +/ { + model = "Renesas V3M Starter Kit board"; + compatible = "renesas,v3msk", "renesas,r8a77970"; + + aliases { + serial0 = &scif0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; +}; + +&avb { + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&scif0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 97e6981938e7..c35a117fc447 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -9,9 +9,10 @@ * kind, whether express or implied. */ -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/r8a77970-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/r8a77970-sysc.h> / { compatible = "renesas,r8a77970"; @@ -31,15 +32,15 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; - clocks = <&cpg CPG_CORE 0>; - power-domains = <&sysc 5>; + clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>; + power-domains = <&sysc R8A77970_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; L2_CA53: cache-controller { compatible = "cache"; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77970_PD_CA53_SCU>; cache-unified; cache-level = <2>; }; @@ -87,7 +88,7 @@ IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 408>; }; @@ -103,6 +104,16 @@ IRQ_TYPE_LEVEL_LOW)>; }; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77970-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77970-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -124,6 +135,49 @@ #power-domain-cells = <1>; }; + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77970_PD_A3IR>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77970"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77970", "renesas,irqc"; #interrupt-cells = <2>; @@ -136,7 +190,7 @@ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 407>; }; @@ -163,10 +217,14 @@ "ch4", "ch5", "ch6", "ch7"; clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>; }; dmac2: dma-controller@e7310000 { @@ -187,10 +245,14 @@ "ch4", "ch5", "ch6", "ch7"; clocks = <&cpg CPG_MOD 217>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>; }; hscif0: serial@e6540000 { @@ -200,13 +262,13 @@ reg = <0 0xe6540000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 520>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x31>, <&dmac1 0x30>, <&dmac2 0x31>, <&dmac2 0x30>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 520>; status = "disabled"; }; @@ -218,13 +280,13 @@ reg = <0 0xe6550000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 519>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 519>; status = "disabled"; }; @@ -236,13 +298,13 @@ reg = <0 0xe6560000 0 96>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 518>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x35>, <&dmac1 0x34>, <&dmac2 0x35>, <&dmac2 0x34>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 518>; status = "disabled"; }; @@ -253,13 +315,13 @@ reg = <0 0xe66a0000 0 96>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 517>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x37>, <&dmac1 0x36>, <&dmac2 0x37>, <&dmac2 0x36>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 517>; status = "disabled"; }; @@ -271,13 +333,13 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x51>, <&dmac1 0x50>, <&dmac2 0x51>, <&dmac2 0x50>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 207>; status = "disabled"; }; @@ -289,13 +351,13 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x53>, <&dmac1 0x52>, <&dmac2 0x53>, <&dmac2 0x52>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 206>; status = "disabled"; }; @@ -307,13 +369,13 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x57>, <&dmac1 0x56>, <&dmac2 0x57>, <&dmac2 0x56>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 204>; status = "disabled"; }; @@ -324,13 +386,13 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>, - <&cpg CPG_CORE 9>, + <&cpg CPG_CORE R8A77970_CLK_S2D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x59>, <&dmac1 0x58>, <&dmac2 0x59>, <&dmac2 0x58>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 203>; status = "disabled"; }; @@ -372,9 +434,10 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii-id"; + iommus = <&ipmmu_rt 3>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 788e3afae6e3..cff42cd1a6c8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -51,6 +51,13 @@ clock-frequency = <0>; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + scif_clk: scif { compatible = "fixed-clock"; #clock-cells = <0>; @@ -108,6 +115,88 @@ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; }; + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77995"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77995-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -155,6 +244,78 @@ resets = <&cpg 407>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a77995", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77995", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77995", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <8>; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77995", "renesas,rcar-gen3-gpio", @@ -267,6 +428,63 @@ resets = <&cpg 906>; }; + can0: can@e6c30000 { + compatible = "renesas,can-r8a77995", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A77995_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a77995", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A77995_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a77995-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A77995_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77995", "renesas,etheravb-rcar-gen3"; @@ -307,6 +525,7 @@ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii-txid"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -321,6 +540,9 @@ <&cpg CPG_CORE R8A77995_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; @@ -366,6 +588,18 @@ status = "disabled"; }; + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a77995", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + ehci0: usb@ee080100 { compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index dbe2648649db..c3fafb6025b3 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -263,6 +263,7 @@ reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; }; @@ -354,6 +355,30 @@ &i2c_dvfs { status = "okay"; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &ohci0 { @@ -409,6 +434,11 @@ function = "i2c2"; }; + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + pwm1_pins: pwm1 { groups = "pwm1_a"; function = "pwm1"; @@ -595,6 +625,7 @@ bus-width = <8>; mmc-hs200-1_8v; non-removable; + fixed-emmc-driver-type = <1>; status = "okay"; }; @@ -616,6 +647,10 @@ shared-pin; }; +&usb_extal_clk { + clock-frequency = <50000000>; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; @@ -631,6 +666,21 @@ status = "okay"; }; +&usb3_peri0 { + phys = <&usb3_phy0>; + phy-names = "usb"; + + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + &wdt0 { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 657ad1041965..a4e715cbde87 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -29,6 +29,7 @@ }; &ehci0 { + dr_mode = "otg"; status = "okay"; }; @@ -41,6 +42,7 @@ }; &hsusb { + dr_mode = "otg"; status = "okay"; }; @@ -67,6 +69,20 @@ output-high; line-name = "HUB rst"; }; + + otg_offvbusn { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "OTG OFFVBUSn"; + }; + + otg_extlpn { + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "OTG EXTLPn"; + }; }; gpio_exp_75: gpio@75 { @@ -119,6 +135,7 @@ }; &ohci0 { + dr_mode = "otg"; status = "okay"; }; @@ -154,6 +171,11 @@ groups = "scif1_data_b", "scif1_ctrl"; function = "scif1"; }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; }; &scif1 { @@ -164,6 +186,13 @@ status = "okay"; }; +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &xhci0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 73439cf48659..3e7a6b94e9f8 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -153,6 +153,7 @@ reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 2426da631938..a037ee56fead 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -531,6 +531,31 @@ status = "disabled"; }; + efuse: efuse@ff260000 { + compatible = "rockchip,rk3328-efuse"; + reg = <0x0 0xff260000 0x0 0x50>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru SCLK_EFUSE>; + clock-names = "pclk_efuse"; + rockchip,efuse-size = <0x20>; + + /* Data cells */ + efuse_id: id@7 { + reg = <0x07 0x10>; + }; + cpu_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + logic_leakage: logic-leakage@19 { + reg = <0x19 0x1>; + }; + efuse_cpu_version: cpu-version@1a { + reg = <0x1a 0x1>; + bits = <3 3>; + }; + }; + saradc: adc@ff280000 { compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc"; reg = <0x0 0xff280000 0x0 0x100>; @@ -543,6 +568,28 @@ status = "disabled"; }; + gpu: gpu@ff300000 { + compatible = "rockchip,rk3328-mali", "arm,mali-450"; + reg = <0x0 0xff300000 0x0 0x40000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1"; + clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; + clock-names = "bus", "core"; + resets = <&cru SRST_GPU_A>; + }; + h265e_mmu: iommu@ff330200 { compatible = "rockchip,iommu"; reg = <0x0 0xff330200 0 0x100>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 0384e3121f18..191a6bcb1704 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -93,6 +93,18 @@ pwm-delay-us = <10000>; }; + edp_panel: edp-panel { + compatible = "sharp,lq123p1jx31", "simple-panel"; + backlight = <&backlight>; + power-supply = <&pp3300_disp>; + + ports { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; @@ -268,6 +280,23 @@ ap_i2c_dig: &i2c2 { }; }; +&edp { + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + &ppvar_bigcpu_pwm { regulator-min-microvolt = <798674>; regulator-max-microvolt = <1302172>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 5772c52fbfd3..03f195025390 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -855,6 +855,20 @@ ap_i2c_audio: &i2c8 { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; }; + + usbc_extcon0: extcon@0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + + #extcon-cells = <0>; + }; + + usbc_extcon1: extcon@1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + + #extcon-cells = <0>; + }; }; }; @@ -865,6 +879,16 @@ ap_i2c_audio: &i2c8 { rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ }; +&tcphy0 { + status = "okay"; + extcon = <&usbc_extcon0>; +}; + +&tcphy1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + &u2phy0 { status = "okay"; }; @@ -911,6 +935,7 @@ ap_i2c_audio: &i2c8 { &usbdrd3_0 { status = "okay"; + extcon = <&usbc_extcon0>; }; &usbdrd_dwc3_0 { @@ -920,6 +945,7 @@ ap_i2c_audio: &i2c8 { &usbdrd3_1 { status = "okay"; + extcon = <&usbc_extcon1>; }; &usbdrd_dwc3_1 { @@ -927,6 +953,22 @@ ap_i2c_audio: &i2c8 { dr_mode = "host"; }; +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + #include <arm/cros-ec-keyboard.dtsi> #include <arm/cros-ec-sbs.dtsi> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index d340b58ab184..7aa2144e0d47 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -397,9 +397,13 @@ #size-cells = <2>; ranges; clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, - <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; + "bus_clk", "aclk_usb3_rksoc_axi_perf", + "aclk_usb3", "grf_clk"; + resets = <&cru SRST_A_USB3_OTG0>; + reset-names = "usb3-otg"; status = "disabled"; usbdrd_dwc3_0: dwc3 { @@ -407,14 +411,15 @@ reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy0_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy0_otg>, <&tcphy0_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; snps,dis_u2_susphy_quirk; snps,dis-del-phy-power-chg-quirk; snps,dis-tx-ipgap-linecheck-quirk; + power-domains = <&power RK3399_PD_USB3>; status = "disabled"; }; }; @@ -425,9 +430,13 @@ #size-cells = <2>; ranges; clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, - <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>; + <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; + "bus_clk", "aclk_usb3_rksoc_axi_perf", + "aclk_usb3", "grf_clk"; + resets = <&cru SRST_A_USB3_OTG1>; + reset-names = "usb3-otg"; status = "disabled"; usbdrd_dwc3_1: dwc3 { @@ -435,14 +444,15 @@ reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy1_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy1_otg>, <&tcphy1_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; snps,dis_u2_susphy_quirk; snps,dis-del-phy-power-chg-quirk; snps,dis-tx-ipgap-linecheck-quirk; + power-domains = <&power RK3399_PD_USB3>; status = "disabled"; }; }; @@ -991,6 +1001,12 @@ clocks = <&cru HCLK_SDIO>; pm_qos = <&qos_sdioaudio>; }; + pd_usb3@RK3399_PD_USB3 { + reg = <RK3399_PD_USB3>; + clocks = <&cru ACLK_USB3>; + pm_qos = <&qos_usb_otg0>, + <&qos_usb_otg1>; + }; pd_vio@RK3399_PD_VIO { reg = <RK3399_PD_VIO>; #address-cells = <1>; @@ -1526,6 +1542,11 @@ reg = <2>; remote-endpoint = <&hdmi_in_vopl>; }; + + vopl_out_mipi1: endpoint@3 { + reg = <3>; + remote-endpoint = <&mipi1_in_vopl>; + }; }; }; @@ -1573,6 +1594,11 @@ reg = <2>; remote-endpoint = <&hdmi_in_vopb>; }; + + vopb_out_mipi1: endpoint@3 { + reg = <3>; + remote-endpoint = <&mipi1_in_vopb>; + }; }; }; @@ -1648,11 +1674,17 @@ <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>; clock-names = "ref", "pclk", "phy_cfg", "grf"; power-domains = <&power RK3399_PD_VIO>; + resets = <&cru SRST_P_MIPI_DSI0>; + reset-names = "apb"; rockchip,grf = <&grf>; status = "disabled"; ports { - mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -1668,6 +1700,41 @@ }; }; + mipi_dsi1: mipi@ff968000 { + compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x0 0xff968000 0x0 0x8000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>, + <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>; + clock-names = "ref", "pclk", "phy_cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + resets = <&cru SRST_P_MIPI_DSI1>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi1_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi1_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi1>; + }; + + mipi1_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi1>; + }; + }; + }; + }; + edp: edp@ff970000 { compatible = "rockchip,rk3399-edp"; reg = <0x0 0xff970000 0x0 0x8000>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 6bdefb26b329..54c53170699a 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -50,7 +50,7 @@ &gpio { xirq0 { gpio-hog; - gpios = <120 0>; + gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 1c63d0ab8a58..cd7c2d0a1f64 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -8,6 +8,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/uniphier-gpio.h> /memreserve/ 0x80000000 0x02000000; @@ -100,7 +101,7 @@ emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>; }; timer { @@ -347,6 +348,7 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + has-transaction-translator; }; usb1: usb@5a810100 { @@ -360,6 +362,7 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + has-transaction-translator; }; usb2: usb@5a820100 { @@ -373,6 +376,7 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + has-transaction-translator; }; mioctrl@5b3e0000 { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 254d6795c67e..693371033c90 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -50,7 +50,7 @@ &gpio { xirq0 { gpio-hog; - gpios = <120 0>; + gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 5c81070944cc..8a3276ba2da1 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -8,6 +8,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/uniphier-gpio.h> #include <dt-bindings/thermal/thermal.h> /memreserve/ 0x80000000 0x02000000; @@ -172,7 +173,7 @@ emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>; }; timer { diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index f9f06fcfb94a..3c7108729827 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -45,6 +45,22 @@ status = "okay"; }; +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&gpio { + xirq4 { + gpio-hog; + gpios = <UNIPHIER_GPIO_IRQ(4) 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 0ac2ace82435..234fc58cc599 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -8,6 +8,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/uniphier-gpio.h> /memreserve/ 0x80000000 0x02000000; @@ -128,7 +129,7 @@ emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>; }; timer { diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index 7b7d8cedacda..5dbfb796d9f9 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -183,6 +183,120 @@ }; soc { + pmu_gate: pmu-gate { + compatible = "sprd,sc9860-pmu-gate"; + sprd,syscon = <&pmu_regs>; /* 0x402b0000 */ + clocks = <&ext_26m>; + #clock-cells = <1>; + }; + + pll: pll { + compatible = "sprd,sc9860-pll"; + sprd,syscon = <&ana_regs>; /* 0x40400000 */ + clocks = <&pmu_gate 0>; + #clock-cells = <1>; + }; + + ap_clk: clock-controller@20000000 { + compatible = "sprd,sc9860-ap-clk"; + reg = <0 0x20000000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>, + <&pmu_gate 0>; + #clock-cells = <1>; + }; + + aon_prediv: aon-prediv { + compatible = "sprd,sc9860-aon-prediv"; + reg = <0 0x402d0000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>, + <&pmu_gate 0>; + #clock-cells = <1>; + }; + + apahb_gate: apahb-gate { + compatible = "sprd,sc9860-apahb-gate"; + sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */ + clocks = <&aon_prediv 0>; + #clock-cells = <1>; + }; + + aon_gate: aon-gate { + compatible = "sprd,sc9860-aon-gate"; + sprd,syscon = <&aon_regs>; /* 0x402e0000 */ + clocks = <&aon_prediv 0>; + #clock-cells = <1>; + }; + + aonsecure_clk: clock-controller@40880000 { + compatible = "sprd,sc9860-aonsecure-clk"; + reg = <0 0x40880000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>; + #clock-cells = <1>; + }; + + agcp_gate: agcp-gate { + compatible = "sprd,sc9860-agcp-gate"; + sprd,syscon = <&agcp_regs>; /* 0x415e0000 */ + clocks = <&aon_prediv 0>; + #clock-cells = <1>; + }; + + gpu_clk: clock-controller@60200000 { + compatible = "sprd,sc9860-gpu-clk"; + reg = <0 0x60200000 0 0x400>; + clocks = <&pll 0>; + #clock-cells = <1>; + }; + + vsp_clk: clock-controller@61000000 { + compatible = "sprd,sc9860-vsp-clk"; + reg = <0 0x61000000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>; + #clock-cells = <1>; + }; + + vsp_gate: vsp-gate { + compatible = "sprd,sc9860-vsp-gate"; + sprd,syscon = <&vsp_regs>; /* 0x61100000 */ + clocks = <&vsp_clk 0>; + #clock-cells = <1>; + }; + + cam_clk: clock-controller@62000000 { + compatible = "sprd,sc9860-cam-clk"; + reg = <0 0x62000000 0 0x4000>; + clocks = <&ext_26m>, <&pll 0>; + #clock-cells = <1>; + }; + + cam_gate: cam-gate { + compatible = "sprd,sc9860-cam-gate"; + sprd,syscon = <&cam_regs>; /* 0x62100000 */ + clocks = <&cam_clk 0>; + #clock-cells = <1>; + }; + + disp_clk: clock-controller@63000000 { + compatible = "sprd,sc9860-disp-clk"; + reg = <0 0x63000000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>; + #clock-cells = <1>; + }; + + disp_gate: disp-gate { + compatible = "sprd,sc9860-disp-gate"; + sprd,syscon = <&disp_regs>; /* 0x63100000 */ + clocks = <&disp_clk 0>; + #clock-cells = <1>; + }; + + apapb_gate: apapb-gate { + compatible = "sprd,sc9860-apapb-gate"; + sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */ + clocks = <&ap_clk 0>; + #clock-cells = <1>; + }; + funnel@10001000 { /* SoC Funnel */ compatible = "arm,coresight-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index 7c217c547f85..328009c4638c 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -17,6 +17,51 @@ #size-cells = <2>; ranges; + ap_ahb_regs: syscon@20210000 { + compatible = "syscon"; + reg = <0 0x20210000 0 0x10000>; + }; + + pmu_regs: syscon@402b0000 { + compatible = "syscon"; + reg = <0 0x402b0000 0 0x10000>; + }; + + aon_regs: syscon@402e0000 { + compatible = "syscon"; + reg = <0 0x402e0000 0 0x10000>; + }; + + ana_regs: syscon@40400000 { + compatible = "syscon"; + reg = <0 0x40400000 0 0x10000>; + }; + + agcp_regs: syscon@415e0000 { + compatible = "syscon"; + reg = <0 0x415e0000 0 0x1000000>; + }; + + vsp_regs: syscon@61100000 { + compatible = "syscon"; + reg = <0 0x61100000 0 0x10000>; + }; + + cam_regs: syscon@62100000 { + compatible = "syscon"; + reg = <0 0x62100000 0 0x10000>; + }; + + disp_regs: syscon@63100000 { + compatible = "syscon"; + reg = <0 0x63100000 0 0x10000>; + }; + + ap_apb_regs: syscon@70b00000 { + compatible = "syscon"; + reg = <0 0x70b00000 0 0x40000>; + }; + ap-apb { compatible = "simple-bus"; #address-cells = <1>; @@ -59,13 +104,26 @@ status = "disabled"; }; }; + }; + ext_32k: ext_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ext-32k"; }; - ext_26m: ext-26m { + ext_26m: ext_26m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; - clock-output-names = "ext_26m"; + clock-output-names = "ext-26m"; + }; + + ext_rco_100m: ext_rco_100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "ext-rco-100m"; }; }; |