summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2017-02-16 17:46:52 +0100
committerArnd Bergmann <arnd@arndb.de>2017-02-16 17:46:52 +0100
commitd0f7de9258e1fa7b531f10a6bdb971a2417dfd8a (patch)
tree2fc19fb337ad9f1a17ed0cc7b4fc17f6465aaa17 /arch/arm64/boot/dts
parenta121103c922847ba5010819a3f250f1f7fc84ab8 (diff)
parent6629490aa027a8af3160e63cffcddc97c1602c96 (diff)
downloadlinux-d0f7de9258e1fa7b531f10a6bdb971a2417dfd8a.tar.bz2
Merge tag 'samsung-dt64-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/late
Pull "Samsung DeviceTree ARM64 update for v4.11, third round" from Krzysztof Kozłowski: 1. Add necessary initial configuration for clocks of display subsystem. Till now it worked mostly thanks to bootloader. 2. Use macro definitions instead of hard-coded values for pinctrl on Exynos7. 3. Enable USB 3.0 (DWC3) on Exynos7. * tag 'samsung-dt64-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (27 commits) arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks arm64: dts: exynos: Add clocks to Exynos5433 LPASS module arm64: dts: exynos: set LDO7 regulator as always on arm64: dts: exynos: configure TV path clocks for Ultra HD modes arm64: dts: exynos: Fix drive strength of sd0_xxx pin definitions arm64: dts: exynos: Disable pull down for audio pins in Exynos5433 SoCs arm64: dts: exynos: Add TM2 touchkey node arm64: dts: exynos: Remove unneeded unit names in Exynos5433 nodes arm64: dts: exynos: Enable HDMI/TV path on Exynos5433-TM2 arm64: dts: exynos: Add HDMI node to Exynos5433 arm64: dts: exynos: Add DECON_TV node to Exynos5433 arm64: dts: exynos: Fix addresses in node names on Exynos5433 arm64: dts: exynos: Make TM2 and TM2E independent from each other arm64: dts: exynos: Fix wrong values for ldo23 and ldo25 on TM2/TM2E ...
Diffstat (limited to 'arch/arm64/boot/dts')
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi197
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi373
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi1191
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2.dts1087
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts42
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433.dtsi123
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7-espresso.dts49
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi302
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7.dtsi34
9 files changed, 2004 insertions, 1394 deletions
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
new file mode 100644
index 000000000000..c42dc39c3223
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
@@ -0,0 +1,197 @@
+/*
+ * Samsung's Exynos5433 SoC Memory interface and AMBA bus device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&soc {
+ bus_g2d_400: bus0 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_top CLK_ACLK_G2D_400>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_g2d_400_opp_table>;
+ status = "disabled";
+ };
+
+ bus_g2d_266: bus1 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_top CLK_ACLK_G2D_266>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_g2d_266_opp_table>;
+ status = "disabled";
+ };
+
+ bus_gscl: bus2 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_top CLK_ACLK_GSCL_333>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_gscl_opp_table>;
+ status = "disabled";
+ };
+
+ bus_hevc: bus3 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_top CLK_ACLK_HEVC_400>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_hevc_opp_table>;
+ status = "disabled";
+ };
+
+ bus_jpeg: bus4 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_top CLK_SCLK_JPEG_MSCL>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_g2d_400_opp_table>;
+ status = "disabled";
+ };
+
+ bus_mfc: bus5 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_top CLK_ACLK_MFC_400>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_g2d_400_opp_table>;
+ status = "disabled";
+ };
+
+ bus_mscl: bus6 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_top CLK_ACLK_MSCL_400>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_g2d_400_opp_table>;
+ status = "disabled";
+ };
+
+ bus_noc0: bus7 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_hevc_opp_table>;
+ status = "disabled";
+ };
+
+ bus_noc1: bus8 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_hevc_opp_table>;
+ status = "disabled";
+ };
+
+ bus_noc2: bus9 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_mif CLK_ACLK_BUS2_400>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_noc2_opp_table>;
+ status = "disabled";
+ };
+
+ bus_g2d_400_opp_table: opp_table2 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp@267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp@200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <975000>;
+ };
+ opp@160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <962500>;
+ };
+ opp@134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ opp-microvolt = <950000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <937500>;
+ };
+ };
+
+ bus_g2d_266_opp_table: opp_table3 {
+ compatible = "operating-points-v2";
+
+ opp@267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ };
+ opp@200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp@160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ };
+ opp@134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ };
+
+ bus_gscl_opp_table: opp_table4 {
+ compatible = "operating-points-v2";
+
+ opp@333000000 {
+ opp-hz = /bits/ 64 <333000000>;
+ };
+ opp@222000000 {
+ opp-hz = /bits/ 64 <222000000>;
+ };
+ opp@166500000 {
+ opp-hz = /bits/ 64 <166500000>;
+ };
+ };
+
+ bus_hevc_opp_table: opp_table5 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp@267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ };
+ opp@200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp@160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ };
+ opp@134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ };
+
+ bus_noc2_opp_table: opp_table6 {
+ compatible = "operating-points-v2";
+
+ opp@400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp@200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp@134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index ad71247b074f..50403700274b 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -12,25 +12,14 @@
* published by the Free Software Foundation.
*/
-#define PIN_PULL_NONE 0
-#define PIN_PULL_DOWN 1
-#define PIN_PULL_UP 3
-
-#define PIN_DRV_LV1 0
-#define PIN_DRV_LV2 2
-#define PIN_DRV_LV3 1
-#define PIN_DRV_LV4 3
-
-#define PIN_IN 0
-#define PIN_OUT 1
-#define PIN_FUNC1 2
-
-#define PIN(_func, _pin, _pull, _drv) \
- _pin { \
- samsung,pins = #_pin; \
- samsung,pin-function = <PIN_ ##_func>; \
- samsung,pin-pud = <PIN_PULL_ ##_pull>; \
- samsung,pin-drv = <PIN_DRV_ ##_drv>; \
+#include <dt-bindings/pinctrl/samsung.h>
+
+#define PIN(_func, _pin, _pull, _drv) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>; \
+ samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>; \
}
&pinctrl_alive {
@@ -145,23 +134,23 @@
i2s0_bus: i2s0-bus {
samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
"gpz0-4", "gpz0-5", "gpz0-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
uart_aud_bus: uart-aud-bus {
samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
};
@@ -196,16 +185,16 @@
spi2_bus: spi2-bus {
samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
hs_i2c6_bus: hs-i2c6-bus {
samsung,pins = "gpd5-3", "gpd5-2";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
};
@@ -260,141 +249,141 @@
sd0_clk: sd0-clk {
samsung,pins = "gpr0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpr0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd0_rdqs: sd0-rdqs {
samsung,pins = "gpr0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd0_qrdy: sd0-qrdy {
samsung,pins = "gpr0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpr1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpr2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpr2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpr3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd1_bus8: sd1-bus-width8 {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
pcie_bus: pcie_bus {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpr4-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpr4-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpr4-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpr4-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
sd2_clk_output: sd2-clk-output {
samsung,pins = "gpr4-0";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
};
sd2_cmd_output: sd2-cmd-output {
samsung,pins = "gpr4-1";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
};
};
@@ -419,9 +408,9 @@
hs_i2c4_bus: hs-i2c4-bus {
samsung,pins = "gpj0-1", "gpj0-0";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
};
@@ -564,225 +553,225 @@
hs_i2c8_bus: hs-i2c8-bus {
samsung,pins = "gpb0-1", "gpb0-0";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
hs_i2c9_bus: hs-i2c9-bus {
samsung,pins = "gpb0-3", "gpb0-2";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
"gpd4-3", "gpd4-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
"gpd4-3", "gpd4-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
spdif_bus: spdif-bus {
samsung,pins = "gpd4-3", "gpd4-4";
- samsung,pin-function = <4>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
fimc_is_spi_pin0: fimc-is-spi-pin0 {
samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
fimc_is_spi_pin1: fimc-is-spi-pin1 {
samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
uart0_bus: uart0-bus {
samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
hs_i2c2_bus: hs-i2c2-bus {
samsung,pins = "gpd0-3", "gpd0-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
uart2_bus: uart2-bus {
samsung,pins = "gpd1-5", "gpd1-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
uart1_bus: uart1-bus {
samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
hs_i2c3_bus: hs-i2c3-bus {
samsung,pins = "gpd1-3", "gpd1-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
hs_i2c0_bus: hs-i2c0-bus {
samsung,pins = "gpd2-1", "gpd2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
hs_i2c1_bus: hs-i2c1-bus {
samsung,pins = "gpd2-3", "gpd2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpd2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpd2-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
pwm2_out: pwm2-out {
samsung,pins = "gpd2-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
pwm3_out: pwm3-out {
samsung,pins = "gpd2-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
hs_i2c7_bus: hs-i2c7-bus {
samsung,pins = "gpd2-7", "gpd2-6";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
hs_i2c10_bus: hs-i2c10-bus {
samsung,pins = "gpg3-1", "gpg3-0";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
hs_i2c11_bus: hs-i2c11-bus {
samsung,pins = "gpg3-3", "gpg3-2";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
spi3_bus: spi3-bus {
samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
spi4_bus: spi4-bus {
samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
fimc_is_uart: fimc-is-uart {
samsung,pins = "gpc1-1", "gpc0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
fimc_is_ch0_i2c: fimc-is-ch0_i2c {
samsung,pins = "gpc2-1", "gpc2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
fimc_is_ch0_mclk: fimc-is-ch0_mclk {
samsung,pins = "gpd7-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
fimc_is_ch1_i2c: fimc-is-ch1-i2c {
samsung,pins = "gpc2-3", "gpc2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
fimc_is_ch1_mclk: fimc-is-ch1-mclk {
samsung,pins = "gpd7-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
fimc_is_ch2_i2c: fimc-is-ch2-i2c {
samsung,pins = "gpc2-5", "gpc2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
fimc_is_ch2_mclk: fimc-is-ch2-mclk {
samsung,pins = "gpd7-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
};
@@ -797,8 +786,8 @@
hs_i2c5_bus: hs-i2c5-bus {
samsung,pins = "gpj1-1", "gpj1-0";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
new file mode 100644
index 000000000000..098ad557fee3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -0,0 +1,1191 @@
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Common device tree source file for Samsung's TM2 and TM2E boards
+ * which are based on Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ aliases {
+ gsc0 = &gsc_0;
+ gsc1 = &gsc_1;
+ gsc2 = &gsc_2;
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_aud;
+ pinctrl2 = &pinctrl_cpif;
+ pinctrl3 = &pinctrl_ese;
+ pinctrl4 = &pinctrl_finger;
+ pinctrl5 = &pinctrl_fsys;
+ pinctrl6 = &pinctrl_imem;
+ pinctrl7 = &pinctrl_nfc;
+ pinctrl8 = &pinctrl_peric;
+ pinctrl9 = &pinctrl_touch;
+ serial0 = &serial_0;
+ serial1 = &serial_1;
+ serial2 = &serial_2;
+ serial3 = &serial_3;
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
+ spi3 = &spi_3;
+ spi4 = &spi_4;
+ mshc0 = &mshc_0;
+ mshc2 = &mshc_2;
+ };
+
+ chosen {
+ stdout-path = &serial_1;
+ };
+
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x0 0x20000000 0x0 0xc0000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ };
+
+ volume-up-key {
+ gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume-up key";
+ debounce-interval = <10>;
+ };
+
+ volume-down-key {
+ gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume-down key";
+ debounce-interval = <10>;
+ };
+
+ homepage-key {
+ gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ label = "homepage key";
+ debounce-interval = <10>;
+ };
+ };
+
+ i2c_max98504: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+ &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max98504: max98504@31 {
+ compatible = "maxim,max98504";
+ reg = <0x31>;
+ maxim,rx-path = <1>;
+ maxim,tx-path = <1>;
+ maxim,tx-channel-mask = <3>;
+ maxim,tx-channel-source = <2>;
+ };
+ };
+
+ sound {
+ compatible = "samsung,tm2-audio";
+ audio-codec = <&wm5110>;
+ i2s-controller = <&i2s0>;
+ audio-amplifier = <&max98504>;
+ mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+ model = "wm5110";
+ samsung,audio-routing =
+ /* Headphone */
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ /* Speaker */
+ "SPK", "SPKOUT",
+ "SPKOUT", "HPOUT2L",
+ "SPKOUT", "HPOUT2R",
+
+ /* Receiver */
+ "RCV", "HPOUT3L",
+ "RCV", "HPOUT3R";
+ status = "okay";
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+
+ thermistor-ap {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 0>;
+ };
+
+ thermistor-battery {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 1>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermistor-charger {
+ compatible = "murata,ncp03wf104";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 2>;
+ };
+};
+
+&bus_g2d_400 {
+ devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
+ vdd-supply = <&buck4_reg>;
+ exynos,saturation-ratio = <10>;
+ status = "okay";
+};
+
+&bus_g2d_266 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_gscl {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_hevc {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_jpeg {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_mfc {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_mscl {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_noc0 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_noc1 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&bus_noc2 {
+ devfreq = <&bus_g2d_400>;
+ status = "okay";
+};
+
+&cmu_aud {
+ assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+ assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+};
+
+&cmu_fsys {
+ assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+ <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+ <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+ <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
+ <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
+ <&cmu_top CLK_DIV_SCLK_USBDRD30>,
+ <&cmu_top CLK_DIV_SCLK_USBHOST30>;
+ assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+ <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+ <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
+ <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+ assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+ <66700000>, <66700000>;
+};
+
+&cmu_gscl {
+ assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
+ <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
+ <&cmu_top CLK_ACLK_GSCL_333>;
+};
+
+&cmu_mfc {
+ assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
+};
+
+&cmu_mscl {
+ assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
+ <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
+ assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
+ <&cmu_top CLK_SCLK_JPEG_MSCL>,
+ <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+ <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+};
+
+&cpu0 {
+ cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&decon_tv {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ tv_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_tv>;
+ };
+ };
+ };
+};
+
+&dsi {
+ status = "okay";
+ vddcore-supply = <&ldo6_reg>;
+ vddio-supply = <&ldo7_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&te_irq>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ samsung,burst-clock-frequency = <512000000>;
+ samsung,esc-clock-frequency = <16000000>;
+ };
+ };
+ };
+};
+
+&hdmi {
+ hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ vdd-supply = <&ldo6_reg>;
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ hdmi_to_tv: endpoint {
+ remote-endpoint = <&tv_to_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi_to_mhl: endpoint {
+ remote-endpoint = <&mhl_to_hdmi>;
+ };
+ };
+ };
+};
+
+&hsi2c_0 {
+ status = "okay";
+ clock-frequency = <2500000>;
+
+ s2mps13-pmic@66 {
+ compatible = "samsung,s2mps13-pmic";
+ interrupt-parent = <&gpa0>;
+ interrupts = <7 IRQ_TYPE_NONE>;
+ reg = <0x66>;
+ samsung,s2mps11-wrstbi-ground;
+
+ s2mps13_osc: clocks {
+ compatible = "samsung,s2mps13-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps13_ap", "s2mps13_cp",
+ "s2mps13_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_0.9V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_MMC2_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD1_E_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD10_DPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MIPI2L_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD18_MIPI2L_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD18_LLI_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD33_USB30_3.0V_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_INT_M_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_KFC_M_1.1V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDD_G3D_M_0.95V_AP";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDDQ_EFUSE";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "V_TFLASH_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "V_CODEC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VDDA_1.8V_COMP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "CAM_IO_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "CAM_SEN_CORE_1.05V_AP";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VT_CAM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "UNUSED_LDO25";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "CAM_AF_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VCC_3.0V_LCD_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "VCC_1.8V_LCD_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "VT_CAM_2.8V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "TSP_AVDD_3.3V_AP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo31_reg: LDO31 {
+ /*
+ * LDO31 differs from target to target,
+ * its definition is in the .dts
+ */
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "VTOUCH_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "VTOUCH_LED_3.3V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "VCC_1.8V_MHL_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "OIS_VM_2.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo36_reg: LDO36 {
+ regulator-name = "VSIL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo37_reg: LDO37 {
+ regulator-name = "VF_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo38_reg: LDO38 {
+ /*
+ * LDO38 differs from target to target,
+ * its definition is in the .dts
+ */
+ };
+
+ ldo39_reg: LDO39 {
+ regulator-name = "V_HRM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo40_reg: LDO40 {
+ regulator-name = "V_HRM_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_EGL_1.0V_AP";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_KFC_1.0V_AP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_INT_0.95V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "VDD_G3D_0.9V_AP";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VDD_MEM1_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VDD_LLDO_1.35V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_MLDO_2.0V_AP";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_mem2";
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&hsi2c_7 {
+ status = "okay";
+
+ sii8620@39 {
+ reg = <0x39>;
+ compatible = "sil,sii8620";
+ cvcc10-supply = <&ldo36_reg>;
+ iovcc18-supply = <&ldo34_reg>;
+ interrupt-parent = <&gpf0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "xtal";
+
+ port {
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
+ };
+ };
+ };
+};
+
+&hsi2c_8 {
+ status = "okay";
+
+ max77843@66 {
+ compatible = "maxim,max77843";
+ interrupt-parent = <&gpa1>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x66>;
+
+ muic: max77843-muic {
+ compatible = "maxim,max77843-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77843-regulator";
+ safeout1_reg: SAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ safeout2_reg: SAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <4950000>;
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <3150000>;
+ };
+ };
+
+ haptic: max77843-haptic {
+ compatible = "maxim,max77843-haptic";
+ haptic-supply = <&ldo38_reg>;
+ pwms = <&pwm 0 33670 0>;
+ pwm-names = "haptic";
+ };
+ };
+};
+
+&hsi2c_11 {
+ status = "okay";
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mshc_0 {
+ status = "okay";
+ num-slots = <1>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ cap-mmc-highspeed;
+ non-removable;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 3>;
+ samsung,read-strobe-delay = <90>;
+ fifo-depth = <0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+ &sd0_bus8 &sd0_rdqs>;
+ bus-width = <8>;
+ assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+ assigned-clock-rates = <800000000>;
+};
+
+&mshc_2 {
+ status = "okay";
+ num-slots = <1>;
+ cap-sd-highspeed;
+ disable-wp;
+ cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ fifo-depth = <0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+};
+
+&ppmu_d0_general {
+ status = "okay";
+ events {
+ ppmu_event0_d0_general: ppmu-event0-d0-general {
+ event-name = "ppmu-event0-d0-general";
+ };
+ };
+};
+
+&ppmu_d1_general {
+ status = "okay";
+ events {
+ ppmu_event0_d1_general: ppmu-event0-d1-general {
+ event-name = "ppmu-event0-d1-general";
+ };
+ };
+};
+
+&pinctrl_alive {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_alive>;
+
+ initial_alive: initial-state {
+ PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpa0-1, NONE, FAST_SR1);
+ PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpa0-3, NONE, FAST_SR1);
+ PIN(INPUT, gpa0-4, NONE, FAST_SR1);
+ PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
+ PIN(INPUT, gpa0-6, NONE, FAST_SR1);
+ PIN(INPUT, gpa0-7, NONE, FAST_SR1);
+
+ PIN(INPUT, gpa1-0, UP, FAST_SR1);
+ PIN(INPUT, gpa1-1, NONE, FAST_SR1);
+ PIN(INPUT, gpa1-2, NONE, FAST_SR1);
+ PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
+ PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
+ PIN(INPUT, gpa1-5, NONE, FAST_SR1);
+ PIN(INPUT, gpa1-6, NONE, FAST_SR1);
+ PIN(INPUT, gpa1-7, NONE, FAST_SR1);
+
+ PIN(INPUT, gpa2-0, NONE, FAST_SR1);
+ PIN(INPUT, gpa2-1, NONE, FAST_SR1);
+ PIN(INPUT, gpa2-2, NONE, FAST_SR1);
+ PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
+ PIN(INPUT, gpa2-4, NONE, FAST_SR1);
+ PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
+ PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
+ PIN(INPUT, gpa2-7, NONE, FAST_SR1);
+
+ PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpa3-2, NONE, FAST_SR1);
+ PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
+ PIN(INPUT, gpa3-4, NONE, FAST_SR1);
+ PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
+ PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
+ PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpf1-0, NONE, FAST_SR1);
+ PIN(INPUT, gpf1-1, NONE, FAST_SR1);
+ PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpf1-4, UP, FAST_SR1);
+ PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
+ PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
+ PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpf3-2, NONE, FAST_SR1);
+ PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
+ PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
+ PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
+ PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
+ PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
+ PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
+ PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
+ PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
+ PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
+ };
+
+ te_irq: te_irq {
+ samsung,pins = "gpf1-3";
+ samsung,pin-function = <0xf>;
+ };
+};
+
+&pinctrl_cpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_cpif>;
+
+ initial_cpif: initial-state {
+ PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
+ };
+};
+
+&pinctrl_ese {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_ese>;
+
+ initial_ese: initial-state {
+ PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
+ };
+};
+
+&pinctrl_fsys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_fsys>;
+
+ initial_fsys: initial-state {
+ PIN(INPUT, gpr3-0, NONE, FAST_SR1);
+ PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
+ PIN(INPUT, gpr3-7, NONE, FAST_SR1);
+ };
+};
+
+&pinctrl_imem {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_imem>;
+
+ initial_imem: initial-state {
+ PIN(INPUT, gpf0-0, UP, FAST_SR1);
+ PIN(INPUT, gpf0-1, UP, FAST_SR1);
+ PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpf0-3, UP, FAST_SR1);
+ PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
+ PIN(INPUT, gpf0-5, NONE, FAST_SR1);
+ PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
+ PIN(INPUT, gpf0-7, UP, FAST_SR1);
+ };
+};
+
+&pinctrl_nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_nfc>;
+
+ initial_nfc: initial-state {
+ PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
+ };
+};
+
+&pinctrl_peric {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_peric>;
+
+ initial_peric: initial-state {
+ PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpv7-2, NONE, FAST_SR1);
+ PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
+ PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
+ PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
+ PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpc3-4, NONE, FAST_SR1);
+ PIN(INPUT, gpc3-5, NONE, FAST_SR1);
+ PIN(INPUT, gpc3-6, NONE, FAST_SR1);
+ PIN(INPUT, gpc3-7, NONE, FAST_SR1);
+
+ PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
+ PIN(2, gpg0-1, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpd4-0, NONE, FAST_SR1);
+ PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
+ PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpd8-1, UP, FAST_SR1);
+
+ PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
+ PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
+ PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
+
+ PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
+ PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
+ PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
+ PIN(INPUT, gpg3-7, DOWN, FAST_SR1);
+ };
+};
+
+&pinctrl_touch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_touch>;
+
+ initial_touch: initial-state {
+ PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mic {
+ status = "okay";
+
+ i80-if-timings {
+ };
+};
+
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&xxti>;
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&spi_1 {
+ cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ wm5110: wm5110-codec@0 {
+ compatible = "wlf,wm5110";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+ interrupt-parent = <&gpa0>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ clocks = <&pmu_system_controller 0>,
+ <&s2mps13_osc S2MPS11_CLK_BT>;
+ clock-names = "mclk1", "mclk2";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ wlf,micd-detect-debounce = <300>;
+ wlf,micd-bias-start-time = <0x1>;
+ wlf,micd-rate = <0x7>;
+ wlf,micd-dbtime = <0x1>;
+ wlf,micd-force-micbias;
+ wlf,micd-configs = <0x0 1 0>;
+ wlf,hpdet-channel = <1>;
+ wlf,gpsw = <0x1>;
+ wlf,inmode = <2 0 2 0>;
+
+ wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+ wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+ /* core supplies */
+ AVDD-supply = <&ldo18_reg>;
+ DBVDD1-supply = <&ldo18_reg>;
+ CPVDD-supply = <&ldo18_reg>;
+ DBVDD2-supply = <&ldo18_reg>;
+ DBVDD3-supply = <&ldo18_reg>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
+ };
+};
+
+&timer {
+ clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_apollo {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&tmu_g3d {
+ vtmu-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&usbdrd30 {
+ vdd33-supply = <&ldo10_reg>;
+ vdd10-supply = <&ldo6_reg>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+ vbus-supply = <&safeout1_reg>;
+ status = "okay";
+};
+
+&xxti {
+ clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index f21bdc2ff834..dea0a6f5bc18 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -11,1039 +11,68 @@
* published by the Free Software Foundation.
*/
-/dts-v1/;
-#include "exynos5433.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos5433-tm2-common.dtsi"
/ {
model = "Samsung TM2 board";
compatible = "samsung,tm2", "samsung,exynos5433";
-
- aliases {
- gsc0 = &gsc_0;
- gsc1 = &gsc_1;
- gsc2 = &gsc_2;
- pinctrl0 = &pinctrl_alive;
- pinctrl1 = &pinctrl_aud;
- pinctrl2 = &pinctrl_cpif;
- pinctrl3 = &pinctrl_ese;
- pinctrl4 = &pinctrl_finger;
- pinctrl5 = &pinctrl_fsys;
- pinctrl6 = &pinctrl_imem;
- pinctrl7 = &pinctrl_nfc;
- pinctrl8 = &pinctrl_peric;
- pinctrl9 = &pinctrl_touch;
- serial0 = &serial_0;
- serial1 = &serial_1;
- serial2 = &serial_2;
- serial3 = &serial_3;
- spi0 = &spi_0;
- spi1 = &spi_1;
- spi2 = &spi_2;
- spi3 = &spi_3;
- spi4 = &spi_4;
- mshc0 = &mshc_0;
- mshc2 = &mshc_2;
- };
-
- chosen {
- stdout-path = &serial_1;
- };
-
- memory@20000000 {
- device_type = "memory";
- reg = <0x0 0x20000000 0x0 0xc0000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power-key {
- gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "power key";
- debounce-interval = <10>;
- };
-
- volume-up-key {
- gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- label = "volume-up key";
- debounce-interval = <10>;
- };
-
- volume-down-key {
- gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- label = "volume-down key";
- debounce-interval = <10>;
- };
-
- homepage-key {
- gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_MENU>;
- label = "homepage key";
- debounce-interval = <10>;
- };
- };
-
- i2c_max98504: i2c-gpio-0 {
- compatible = "i2c-gpio";
- gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
- &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- max98504: max98504@31 {
- compatible = "maxim,max98504";
- reg = <0x31>;
- maxim,rx-path = <1>;
- maxim,tx-path = <1>;
- maxim,tx-channel-mask = <3>;
- maxim,tx-channel-source = <2>;
- };
- };
-
- sound {
- compatible = "samsung,tm2-audio";
- audio-codec = <&wm5110>;
- i2s-controller = <&i2s0>;
- audio-amplifier = <&max98504>;
- mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
- model = "wm5110";
- samsung,audio-routing =
- /* Headphone */
- "HP", "HPOUT1L",
- "HP", "HPOUT1R",
-
- /* Speaker */
- "SPK", "SPKOUT",
- "SPKOUT", "HPOUT2L",
- "SPKOUT", "HPOUT2R",
-
- /* Receiver */
- "RCV", "HPOUT3L",
- "RCV", "HPOUT3R";
- status = "okay";
- };
-};
-
-&adc {
- vdd-supply = <&ldo3_reg>;
- status = "okay";
-
- thermistor-ap {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 0>;
- };
-
- thermistor-battery {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 1>;
- #thermal-sensor-cells = <0>;
- };
-
- thermistor-charger {
- compatible = "murata,ncp03wf104";
- pullup-uv = <1800000>;
- pullup-ohm = <100000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 2>;
- };
-};
-
-&cmu_aud {
- assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
- assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
-};
-
-&cmu_fsys {
- assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
- <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
- <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
- <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
- <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
- <&cmu_top CLK_DIV_SCLK_USBDRD30>,
- <&cmu_top CLK_DIV_SCLK_USBHOST30>;
- assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_MOUT_BUS_PLL_USER>,
- <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
- <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
- <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
- assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
- <66700000>, <66700000>;
-};
-
-&cmu_gscl {
- assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
- <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
- <&cmu_top CLK_ACLK_GSCL_333>;
-};
-
-&cmu_mfc {
- assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
-};
-
-&cmu_mscl {
- assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
- <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
- assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
- <&cmu_top CLK_SCLK_JPEG_MSCL>,
- <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
- <&cmu_top CLK_MOUT_BUS_PLL_USER>;
-};
-
-&cpu0 {
- cpu-supply = <&buck3_reg>;
-};
-
-&cpu4 {
- cpu-supply = <&buck2_reg>;
-};
-
-&decon {
- status = "okay";
-
- i80-if-timings {
- };
-};
-
-&dsi {
- status = "okay";
- vddcore-supply = <&ldo6_reg>;
- vddio-supply = <&ldo7_reg>;
- samsung,pll-clock-frequency = <24000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&te_irq>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dsi_out: endpoint {
- samsung,burst-clock-frequency = <512000000>;
- samsung,esc-clock-frequency = <16000000>;
- };
- };
- };
-};
-
-&hsi2c_0 {
- status = "okay";
- clock-frequency = <2500000>;
-
- s2mps13-pmic@66 {
- compatible = "samsung,s2mps13-pmic";
- interrupt-parent = <&gpa0>;
- interrupts = <7 IRQ_TYPE_NONE>;
- reg = <0x66>;
- samsung,s2mps11-wrstbi-ground;
-
- s2mps13_osc: clocks {
- compatible = "samsung,s2mps13-clk";
- #clock-cells = <1>;
- clock-output-names = "s2mps13_ap", "s2mps13_cp",
- "s2mps13_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_0.9V_AP";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_MMC2_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD1_E_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD10_MIF_PLL_1.0V_AP";
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD10_DPLL_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD10_MIPI2L_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD18_MIPI2L_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD18_LLI_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD18_ABB_ETC_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD33_USB30_3.0V_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_INT_M_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_KFC_M_1.1V_AP";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDD_G3D_M_0.95V_AP";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <950000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDDQ_M1_LDO_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDDQ_M2_LDO_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDDQ_EFUSE";
- regulator-min-microvolt = <1400000>;
- regulator-max-microvolt = <3400000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "V_TFLASH_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "V_CODEC_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "VDDA_1.8V_COMP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo20_reg: LDO20 {
- regulator-name = "VCC_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "VT_CAM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "CAM_IO_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "CAM_SEN_CORE_1.2V_AP";
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "VT_CAM_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "CAM_SEN_A2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "CAM_AF_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo27_reg: LDO27 {
- regulator-name = "VCC_3.0V_LCD_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo28_reg: LDO28 {
- regulator-name = "VCC_1.8V_LCD_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo29_reg: LDO29 {
- regulator-name = "VT_CAM_2.8V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo30_reg: LDO30 {
- regulator-name = "TSP_AVDD_3.3V_AP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo31_reg: LDO31 {
- regulator-name = "TSP_VDD_1.85V_AP";
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1850000>;
- };
-
- ldo32_reg: LDO32 {
- regulator-name = "VTOUCH_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo33_reg: LDO33 {
- regulator-name = "VTOUCH_LED_3.3V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
- };
-
- ldo34_reg: LDO34 {
- regulator-name = "VCC_1.8V_MHL_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <2100000>;
- };
-
- ldo35_reg: LDO35 {
- regulator-name = "OIS_VM_2.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo36_reg: LDO36 {
- regulator-name = "VSIL_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo37_reg: LDO37 {
- regulator-name = "VF_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo38_reg: LDO38 {
- regulator-name = "VCC_3.0V_MOTOR_AP";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo39_reg: LDO39 {
- regulator-name = "V_HRM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo40_reg: LDO40 {
- regulator-name = "V_HRM_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "VDD_MIF_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "VDD_EGL_1.0V_AP";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "VDD_KFC_1.0V_AP";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "VDD_INT_0.95V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_DISP_CAM0_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "VDD_G3D_0.9V_AP";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "VDD_MEM1_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "VDD_LLDO_1.35V_AP";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_MLDO_2.0V_AP";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_mem2";
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&hsi2c_8 {
- status = "okay";
-
- max77843@66 {
- compatible = "maxim,max77843";
- interrupt-parent = <&gpa1>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
- reg = <0x66>;
-
- muic: max77843-muic {
- compatible = "maxim,max77843-muic";
- };
-
- regulators {
- compatible = "maxim,max77843-regulator";
- safeout1_reg: SAFEOUT1 {
- regulator-name = "SAFEOUT1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <4950000>;
- };
-
- safeout2_reg: SAFEOUT2 {
- regulator-name = "SAFEOUT2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <4950000>;
- };
-
- charger_reg: CHARGER {
- regulator-name = "CHARGER";
- regulator-min-microamp = <100000>;
- regulator-max-microamp = <3150000>;
- };
- };
-
- haptic: max77843-haptic {
- compatible = "maxim,max77843-haptic";
- haptic-supply = <&ldo38_reg>;
- pwms = <&pwm 0 33670 0>;
- pwm-names = "haptic";
- };
- };
-};
-
-&i2s0 {
- status = "okay";
-};
-
-&mshc_0 {
- status = "okay";
- num-slots = <1>;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- cap-mmc-highspeed;
- non-removable;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- samsung,dw-mshc-hs400-timing = <0 3>;
- samsung,read-strobe-delay = <90>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
- &sd0_bus8 &sd0_rdqs>;
- bus-width = <8>;
- assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
- assigned-clock-rates = <800000000>;
-};
-
-&mshc_2 {
- status = "okay";
- num-slots = <1>;
- cap-sd-highspeed;
- disable-wp;
- cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- fifo-depth = <0x80>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
-};
-
-&pinctrl_alive {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_alive>;
-
- initial_alive: initial-state {
- PIN(IN, gpa0-0, DOWN, LV1);
- PIN(IN, gpa0-1, NONE, LV1);
- PIN(IN, gpa0-2, DOWN, LV1);
- PIN(IN, gpa0-3, NONE, LV1);
- PIN(IN, gpa0-4, NONE, LV1);
- PIN(IN, gpa0-5, DOWN, LV1);
- PIN(IN, gpa0-6, NONE, LV1);
- PIN(IN, gpa0-7, NONE, LV1);
-
- PIN(IN, gpa1-0, UP, LV1);
- PIN(IN, gpa1-1, NONE, LV1);
- PIN(IN, gpa1-2, NONE, LV1);
- PIN(IN, gpa1-3, DOWN, LV1);
- PIN(IN, gpa1-4, DOWN, LV1);
- PIN(IN, gpa1-5, NONE, LV1);
- PIN(IN, gpa1-6, NONE, LV1);
- PIN(IN, gpa1-7, NONE, LV1);
-
- PIN(IN, gpa2-0, NONE, LV1);
- PIN(IN, gpa2-1, NONE, LV1);
- PIN(IN, gpa2-2, NONE, LV1);
- PIN(IN, gpa2-3, DOWN, LV1);
- PIN(IN, gpa2-4, NONE, LV1);
- PIN(IN, gpa2-5, DOWN, LV1);
- PIN(IN, gpa2-6, DOWN, LV1);
- PIN(IN, gpa2-7, NONE, LV1);
-
- PIN(IN, gpa3-0, DOWN, LV1);
- PIN(IN, gpa3-1, DOWN, LV1);
- PIN(IN, gpa3-2, NONE, LV1);
- PIN(IN, gpa3-3, DOWN, LV1);
- PIN(IN, gpa3-4, NONE, LV1);
- PIN(IN, gpa3-5, DOWN, LV1);
- PIN(IN, gpa3-6, DOWN, LV1);
- PIN(IN, gpa3-7, DOWN, LV1);
-
- PIN(IN, gpf1-0, NONE, LV1);
- PIN(IN, gpf1-1, NONE, LV1);
- PIN(IN, gpf1-2, DOWN, LV1);
- PIN(IN, gpf1-4, UP, LV1);
- PIN(OUT, gpf1-5, NONE, LV1);
- PIN(IN, gpf1-6, DOWN, LV1);
- PIN(IN, gpf1-7, DOWN, LV1);
-
- PIN(IN, gpf2-0, DOWN, LV1);
- PIN(IN, gpf2-1, DOWN, LV1);
- PIN(IN, gpf2-2, DOWN, LV1);
- PIN(IN, gpf2-3, DOWN, LV1);
-
- PIN(IN, gpf3-0, DOWN, LV1);
- PIN(IN, gpf3-1, DOWN, LV1);
- PIN(IN, gpf3-2, NONE, LV1);
- PIN(IN, gpf3-3, DOWN, LV1);
-
- PIN(IN, gpf4-0, DOWN, LV1);
- PIN(IN, gpf4-1, DOWN, LV1);
- PIN(IN, gpf4-2, DOWN, LV1);
- PIN(IN, gpf4-3, DOWN, LV1);
- PIN(IN, gpf4-4, DOWN, LV1);
- PIN(IN, gpf4-5, DOWN, LV1);
- PIN(IN, gpf4-6, DOWN, LV1);
- PIN(IN, gpf4-7, DOWN, LV1);
-
- PIN(IN, gpf5-0, DOWN, LV1);
- PIN(IN, gpf5-1, DOWN, LV1);
- PIN(IN, gpf5-2, DOWN, LV1);
- PIN(IN, gpf5-3, DOWN, LV1);
- PIN(OUT, gpf5-4, NONE, LV1);
- PIN(IN, gpf5-5, DOWN, LV1);
- PIN(IN, gpf5-6, DOWN, LV1);
- PIN(IN, gpf5-7, DOWN, LV1);
- };
-
- te_irq: te_irq {
- samsung,pins = "gpf1-3";
- samsung,pin-function = <0xf>;
- };
-};
-
-&pinctrl_cpif {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_cpif>;
-
- initial_cpif: initial-state {
- PIN(IN, gpv6-0, DOWN, LV1);
- PIN(IN, gpv6-1, DOWN, LV1);
- };
-};
-
-&pinctrl_ese {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_ese>;
-
- initial_ese: initial-state {
- PIN(IN, gpj2-0, DOWN, LV1);
- PIN(IN, gpj2-1, DOWN, LV1);
- PIN(IN, gpj2-2, DOWN, LV1);
- };
-};
-
-&pinctrl_fsys {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_fsys>;
-
- initial_fsys: initial-state {
- PIN(IN, gpr3-0, NONE, LV1);
- PIN(IN, gpr3-1, DOWN, LV1);
- PIN(IN, gpr3-2, DOWN, LV1);
- PIN(IN, gpr3-3, DOWN, LV1);
- PIN(IN, gpr3-7, NONE, LV1);
- };
-};
-
-&pinctrl_imem {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_imem>;
-
- initial_imem: initial-state {
- PIN(IN, gpf0-0, UP, LV1);
- PIN(IN, gpf0-1, UP, LV1);
- PIN(IN, gpf0-2, DOWN, LV1);
- PIN(IN, gpf0-3, UP, LV1);
- PIN(IN, gpf0-4, DOWN, LV1);
- PIN(IN, gpf0-5, NONE, LV1);
- PIN(IN, gpf0-6, DOWN, LV1);
- PIN(IN, gpf0-7, UP, LV1);
- };
-};
-
-&pinctrl_nfc {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_nfc>;
-
- initial_nfc: initial-state {
- PIN(IN, gpj0-2, DOWN, LV1);
- };
-};
-
-&pinctrl_peric {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_peric>;
-
- initial_peric: initial-state {
- PIN(IN, gpv7-0, DOWN, LV1);
- PIN(IN, gpv7-1, DOWN, LV1);
- PIN(IN, gpv7-2, NONE, LV1);
- PIN(IN, gpv7-3, DOWN, LV1);
- PIN(IN, gpv7-4, DOWN, LV1);
- PIN(IN, gpv7-5, DOWN, LV1);
-
- PIN(IN, gpb0-4, DOWN, LV1);
-
- PIN(IN, gpc0-2, DOWN, LV1);
- PIN(IN, gpc0-5, DOWN, LV1);
- PIN(IN, gpc0-7, DOWN, LV1);
-
- PIN(IN, gpc1-1, DOWN, LV1);
-
- PIN(IN, gpc3-4, NONE, LV1);
- PIN(IN, gpc3-5, NONE, LV1);
- PIN(IN, gpc3-6, NONE, LV1);
- PIN(IN, gpc3-7, NONE, LV1);
-
- PIN(OUT, gpg0-0, NONE, LV1);
- PIN(FUNC1, gpg0-1, DOWN, LV1);
-
- PIN(IN, gpd2-5, DOWN, LV1);
-
- PIN(IN, gpd4-0, NONE, LV1);
- PIN(IN, gpd4-1, DOWN, LV1);
- PIN(IN, gpd4-2, DOWN, LV1);
- PIN(IN, gpd4-3, DOWN, LV1);
- PIN(IN, gpd4-4, DOWN, LV1);
-
- PIN(IN, gpd6-3, DOWN, LV1);
-
- PIN(IN, gpd8-1, UP, LV1);
-
- PIN(IN, gpg1-0, DOWN, LV1);
- PIN(IN, gpg1-1, DOWN, LV1);
- PIN(IN, gpg1-2, DOWN, LV1);
- PIN(IN, gpg1-3, DOWN, LV1);
- PIN(IN, gpg1-4, DOWN, LV1);
-
- PIN(IN, gpg2-0, DOWN, LV1);
- PIN(IN, gpg2-1, DOWN, LV1);
-
- PIN(IN, gpg3-0, DOWN, LV1);
- PIN(IN, gpg3-1, DOWN, LV1);
- PIN(IN, gpg3-5, DOWN, LV1);
- PIN(IN, gpg3-7, DOWN, LV1);
- };
-};
-
-&pinctrl_touch {
- pinctrl-names = "default";
- pinctrl-0 = <&initial_touch>;
-
- initial_touch: initial-state {
- PIN(IN, gpj1-2, DOWN, LV1);
- };
-};
-
-&pwm {
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&mic {
- status = "okay";
-
- i80-if-timings {
- };
-};
-
-&pmu_system_controller {
- assigned-clocks = <&pmu_system_controller 0>;
- assigned-clock-parents = <&xxti>;
-};
-
-&serial_1 {
- status = "okay";
-};
-
-&spi_1 {
- cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- wm5110: wm5110-codec@0 {
- compatible = "wlf,wm5110";
- reg = <0x0>;
- spi-max-frequency = <20000000>;
- interrupt-parent = <&gpa0>;
- interrupts = <4 IRQ_TYPE_NONE>;
- clocks = <&pmu_system_controller 0>,
- <&s2mps13_osc S2MPS11_CLK_BT>;
- clock-names = "mclk1", "mclk2";
-
- gpio-controller;
- #gpio-cells = <2>;
-
- wlf,micd-detect-debounce = <300>;
- wlf,micd-bias-start-time = <0x1>;
- wlf,micd-rate = <0x7>;
- wlf,micd-dbtime = <0x1>;
- wlf,micd-force-micbias;
- wlf,micd-configs = <0x0 1 0>;
- wlf,hpdet-channel = <1>;
- wlf,gpsw = <0x1>;
- wlf,inmode = <2 0 2 0>;
-
- wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
- wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
-
- /* core supplies */
- AVDD-supply = <&ldo18_reg>;
- DBVDD1-supply = <&ldo18_reg>;
- CPVDD-supply = <&ldo18_reg>;
- DBVDD2-supply = <&ldo18_reg>;
- DBVDD3-supply = <&ldo18_reg>;
-
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
- };
-};
-
-&timer {
- clock-frequency = <24000000>;
-};
-
-&tmu_atlas0 {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&tmu_apollo {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&tmu_g3d {
- vtmu-supply = <&ldo3_reg>;
- status = "okay";
-};
-
-&usbdrd30 {
- vdd33-supply = <&ldo10_reg>;
- vdd10-supply = <&ldo6_reg>;
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "otg";
-};
-
-&usbdrd30_phy {
- vbus-supply = <&safeout1_reg>;
- status = "okay";
};
-&xxti {
- clock-frequency = <24000000>;
+&cmu_disp {
+ /*
+ * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+ * clocks properties for DISP CMU for each board to keep them together
+ * for easier review and maintenance.
+ */
+ assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+ <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+ <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+ <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+ <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+ <&cmu_disp CLK_MOUT_DISP_PLL>,
+ <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+ assigned-clock-parents = <0>, <0>,
+ <&cmu_mif CLK_ACLK_DISP_333>,
+ <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+ <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+ <&cmu_disp CLK_FOUT_DISP_PLL>,
+ <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+ <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+ assigned-clock-rates = <250000000>, <400000000>;
+};
+
+&hsi2c_9 {
+ status = "okay";
+
+ touchkey@20 {
+ compatible = "cypress,tm2-touchkey";
+ reg = <0x20>;
+ interrupt-parent = <&gpa3>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ vcc-supply = <&ldo32_reg>;
+ vdd-supply = <&ldo33_reg>;
+ };
+};
+
+&ldo31_reg {
+ regulator-name = "TSP_VDD_1.85V_AP";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+};
+
+&ldo38_reg {
+ regulator-name = "VCC_3.0V_MOTOR_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 1db4e7f363a9..7891a31adc17 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -11,21 +11,45 @@
* published by the Free Software Foundation.
*/
-#include "exynos5433-tm2.dts"
+#include "exynos5433-tm2-common.dtsi"
/ {
model = "Samsung TM2E board";
compatible = "samsung,tm2e", "samsung,exynos5433";
};
-&ldo23_reg {
- regulator-name = "CAM_SEN_CORE_1.025V_AP";
- regulator-max-microvolt = <1050000>;
-};
-
-&ldo25_reg {
- regulator-name = "UNUSED_LDO25";
- regulator-always-off;
+&cmu_disp {
+ /*
+ * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+ * clocks properties for DISP CMU for each board to keep them together
+ * for easier review and maintenance.
+ */
+ assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+ <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+ <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+ <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+ <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+ <&cmu_disp CLK_MOUT_DISP_PLL>,
+ <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+ assigned-clock-parents = <0>, <0>,
+ <&cmu_mif CLK_ACLK_DISP_333>,
+ <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+ <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+ <&cmu_disp CLK_FOUT_DISP_PLL>,
+ <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+ <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+ <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+ assigned-clock-rates = <278000000>, <400000000>;
};
&ldo31_reg {
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 64226d5ae471..7b02fd6e33e1 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -299,7 +299,7 @@
#clock-cells = <1>;
};
- cmu_peris: clock-controller@0x10040000 {
+ cmu_peris: clock-controller@10040000 {
compatible = "samsung,exynos5433-cmu-peris";
reg = <0x10040000 0x1000>;
#clock-cells = <1>;
@@ -599,6 +599,30 @@
clock-names = "fin_pll", "mct";
};
+ ppmu_d0_cpu: ppmu@10480000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x10480000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d0_general: ppmu@10490000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x10490000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_cpu: ppmu@104b0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104b0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_general: ppmu@104c0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104c0000 0x2000>;
+ status = "disabled";
+ };
+
pinctrl_alive: pinctrl@10580000 {
compatible = "samsung,exynos5433-pinctrl";
reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
@@ -682,7 +706,7 @@
interrupts = <GIC_PPI 9 0xf04>;
};
- mipi_phy: video-phy@105c0710 {
+ mipi_phy: video-phy {
compatible = "samsung,exynos5433-mipi-video-phy";
#phy-cells = <1>;
samsung,pmu-syscon = <&pmu_system_controller>;
@@ -727,6 +751,29 @@
};
};
+ decon_tv: decon@13880000 {
+ compatible = "samsung,exynos5433-decon-tv";
+ reg = <0x13880000 0x20b8>;
+ clocks = <&cmu_disp CLK_PCLK_DECON_TV>,
+ <&cmu_disp CLK_ACLK_DECON_TV>,
+ <&cmu_disp CLK_ACLK_SMMU_TV0X>,
+ <&cmu_disp CLK_ACLK_XIU_TV0X>,
+ <&cmu_disp CLK_PCLK_SMMU_TV0X>,
+ <&cmu_disp CLK_SCLK_DECON_TV_VCLK>,
+ <&cmu_disp CLK_SCLK_DECON_TV_ECLK>;
+ clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
+ "aclk_xiu_decon0x", "pclk_smmu_decon0x",
+ "sclk_decon_vclk", "sclk_decon_eclk";
+ samsung,disp-sysreg = <&syscon_disp>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ iommus = <&sysmmu_tv0x>, <&sysmmu_tv1x>;
+ iommu-names = "m0", "m1";
+ };
+
dsi: dsi@13900000 {
compatible = "samsung,exynos5433-mipi-dsi";
reg = <0x13900000 0xC0>;
@@ -790,6 +837,35 @@
};
};
+ hdmi: hdmi@13970000 {
+ compatible = "samsung,exynos5433-hdmi";
+ reg = <0x13970000 0x70000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_disp CLK_PCLK_HDMI>,
+ <&cmu_disp CLK_PCLK_HDMIPHY>,
+ <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+ <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+ <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+ <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+ <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+ <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+ <&xxti>, <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+ clock-names = "hdmi_pclk", "hdmi_i_pclk",
+ "i_tmds_clk", "i_pixel_clk",
+ "tmds_clko", "tmds_clko_user",
+ "pixel_clko", "pixel_clko_user",
+ "oscclk", "i_spdif_clk";
+ phy = <&hdmiphy>;
+ ddc = <&hsi2c_11>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,sysreg-phandle = <&syscon_disp>;
+ status = "disabled";
+ };
+
+ hdmiphy: hdmiphy@13af0000 {
+ reg = <0x13af0000 0x80>;
+ };
+
syscon_disp: syscon@13b80000 {
compatible = "syscon";
reg = <0x13b80000 0x1010>;
@@ -868,7 +944,7 @@
iommu-names = "left", "right";
};
- sysmmu_decon0x: sysmmu@0x13a00000 {
+ sysmmu_decon0x: sysmmu@13a00000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13a00000 0x1000>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
@@ -878,7 +954,7 @@
#iommu-cells = <0>;
};
- sysmmu_decon1x: sysmmu@0x13a10000 {
+ sysmmu_decon1x: sysmmu@13a10000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13a10000 0x1000>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
@@ -888,7 +964,27 @@
#iommu-cells = <0>;
};
- sysmmu_gscl0: sysmmu@0x13C80000 {
+ sysmmu_tv0x: sysmmu@13a20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13a20000 0x1000>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>,
+ <&cmu_disp CLK_ACLK_SMMU_TV0X>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_tv1x: sysmmu@13a30000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13a30000 0x1000>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "aclk";
+ clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>,
+ <&cmu_disp CLK_ACLK_SMMU_TV1X>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gscl0: sysmmu@13c80000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13C80000 0x1000>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
@@ -898,7 +994,7 @@
#iommu-cells = <0>;
};
- sysmmu_gscl1: sysmmu@0x13C90000 {
+ sysmmu_gscl1: sysmmu@13c90000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13C90000 0x1000>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
@@ -908,7 +1004,7 @@
#iommu-cells = <0>;
};
- sysmmu_gscl2: sysmmu@0x13CA0000 {
+ sysmmu_gscl2: sysmmu@13ca0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13CA0000 0x1000>;
interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
@@ -918,7 +1014,7 @@
#iommu-cells = <0>;
};
- sysmmu_jpeg: sysmmu@0x15060000 {
+ sysmmu_jpeg: sysmmu@15060000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x15060000 0x1000>;
interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
@@ -928,7 +1024,7 @@
#iommu-cells = <0>;
};
- sysmmu_mfc_0: sysmmu@0x15200000 {
+ sysmmu_mfc_0: sysmmu@15200000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x15200000 0x1000>;
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
@@ -938,7 +1034,7 @@
#iommu-cells = <0>;
};
- sysmmu_mfc_1: sysmmu@0x15210000 {
+ sysmmu_mfc_1: sysmmu@15210000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x15210000 0x1000>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
@@ -1261,7 +1357,7 @@
status = "disabled";
};
- usbdrd30: usb@15400000 {
+ usbdrd30: usbdrd {
compatible = "samsung,exynos5250-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
<&cmu_fsys CLK_SCLK_USBDRD30>;
@@ -1308,7 +1404,7 @@
status = "disabled";
};
- usbhost30: usb@15a00000 {
+ usbhost30: usbhost {
compatible = "samsung,exynos5250-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
<&cmu_fsys CLK_SCLK_USBHOST30>;
@@ -1398,6 +1494,8 @@
audio-subsystem@11400000 {
compatible = "samsung,exynos5433-lpass";
reg = <0x11400000 0x100>, <0x11500000 0x08>;
+ clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
+ clock-names = "sfr0_ctrl";
samsung,pmu-syscon = <&pmu_system_controller>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1458,5 +1556,6 @@
};
};
+#include "exynos5433-bus.dtsi"
#include "exynos5433-pinctrl.dtsi"
#include "exynos5433-tmu.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index c528dd52ba2d..e5892bb0ae6e 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -13,6 +13,7 @@
#include "exynos7.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -32,6 +33,29 @@
device_type = "memory";
reg = <0x0 0x40000000 0x0 0xC0000000>;
};
+
+ usb30_vbus_reg: regulator-usb30 {
+ compatible = "regulator-fixed";
+ regulator-name = "VBUS_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_vbus_en>;
+ enable-active-high;
+ };
+
+ usb3drd_boost_5v: regulator-usb3drd-boost {
+ compatible = "regulator-fixed";
+ regulator-name = "VUSB_VBUS_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3drd_boost_en>;
+ enable-active-high;
+ };
+
};
&fin_pll {
@@ -328,8 +352,8 @@
&pinctrl_alive {
pmic_irq: pmic-irq {
samsung,pins = "gpa0-2";
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
@@ -365,3 +389,24 @@
vqmmc-supply = <&ldo2_reg>;
disable-wp;
};
+
+&pinctrl_bus1 {
+ usb30_vbus_en: usb30-vbus-en {
+ samsung,pins = "gph1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ usb3drd_boost_en: usb3drd-boost-en {
+ samsung,pins = "gpf4-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+};
+
+&usbdrd_phy {
+ vbus-supply = <&usb30_vbus_reg>;
+ vbus-boost-supply = <&usb3drd_boost_5v>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index 82321984e1fb..8f58850cd28c 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/pinctrl/samsung.h>
+
&pinctrl_alive {
gpa0: gpa0 {
gpio-controller;
@@ -187,163 +189,163 @@
hs_i2c10_bus: hs-i2c10-bus {
samsung,pins = "gpb0-1", "gpb0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c11_bus: hs-i2c11-bus {
samsung,pins = "gpb0-3", "gpb0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c2_bus: hs-i2c2-bus {
samsung,pins = "gpd0-3", "gpd0-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_data: uart0-data {
samsung,pins = "gpd0-0", "gpd0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpd0-2", "gpd0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
samsung,pins = "gpd1-4", "gpd1-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c3_bus: hs-i2c3-bus {
samsung,pins = "gpd1-3", "gpd1-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpd1-0", "gpd1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpd1-2", "gpd1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c0_bus: hs-i2c0-bus {
samsung,pins = "gpd2-1", "gpd2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c1_bus: hs-i2c1-bus {
samsung,pins = "gpd2-3", "gpd2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c9_bus: hs-i2c9-bus {
samsung,pins = "gpd2-7", "gpd2-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpd2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpd2-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
samsung,pins = "gpd2-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
samsung,pins = "gpd2-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c8_bus: hs-i2c8-bus {
samsung,pins = "gpd5-3", "gpd5-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart3_data: uart3-data {
samsung,pins = "gpd5-0", "gpd5-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus {
samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c4_bus: hs-i2c4-bus {
samsung,pins = "gpg3-1", "gpg3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hs_i2c5_bus: hs-i2c5-bus {
samsung,pins = "gpg3-3", "gpg3-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -358,9 +360,9 @@
hs_i2c6_bus: hs-i2c6-bus {
samsung,pins = "gpj0-1", "gpj0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -375,9 +377,9 @@
hs_i2c7_bus: hs-i2c7-bus {
samsung,pins = "gpj1-1", "gpj1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -392,9 +394,9 @@
spi3_bus: spi3-bus {
samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -409,9 +411,9 @@
spi4_bus: spi4-bus {
samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
@@ -426,37 +428,37 @@
sd2_clk: sd2-clk {
samsung,pins = "gpr4-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpr4-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpr4-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpr4-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
@@ -495,107 +497,107 @@
sd0_clk: sd0-clk {
samsung,pins = "gpr0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpr0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_ds: sd0-ds {
samsung,pins = "gpr0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_qrdy: sd0-qrdy {
samsung,pins = "gpr0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpr1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpr2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpr2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_ds: sd1-ds {
samsung,pins = "gpr2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <6>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
sd1_qrdy: sd1-qrdy {
samsung,pins = "gpr2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <6>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
sd1_int: sd1-int {
samsung,pins = "gpr2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <6>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpr3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
sd1_bus8: sd1-bus-width8 {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
};
@@ -682,22 +684,22 @@
spi5_bus: spi5-bus {
samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ufs_refclk_out: ufs-refclk-out {
samsung,pins = "gpg2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
};
ufs_rst_n: ufs-rst-n {
samsung,pins = "gph1-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 80aa60e38237..9a3fbed1765a 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -603,6 +603,40 @@
#include "exynos7-trip-points.dtsi"
};
};
+
+ usbdrd_phy: phy@15500000 {
+ compatible = "samsung,exynos7-usbdrd-phy";
+ reg = <0x15500000 0x100>;
+ clocks = <&clock_fsys0 ACLK_USBDRD300>,
+ <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
+ <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
+ <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
+ <&clock_fsys0 SCLK_USBDRD300_REFCLK>;
+ clock-names = "phy", "ref", "phy_pipe",
+ "phy_utmi", "itp";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
+ };
+
+ usbdrd3 {
+ compatible = "samsung,exynos7-dwusb3";
+ clocks = <&clock_fsys0 ACLK_USBDRD300>,
+ <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
+ <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
+ clock-names = "usbdrd30", "usbdrd30_susp_clk",
+ "usbdrd30_axius_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3@15400000 {
+ compatible = "snps,dwc3";
+ reg = <0x15400000 0x10000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
};
};