summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-orion
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:02:18 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:02:18 -0700
commitfcba914542082b272f31c8e4c40000b88ed3208d (patch)
treefb28069bf571d93420daafd501b4e97f221d526c /arch/arm/plat-orion
parenta8c4b90e670be3b01e9395c7310639c8109fc77e (diff)
parent5c5f0421a8eea5bdaba9b9313c5bb4833aeb39cd (diff)
downloadlinux-fcba914542082b272f31c8e4c40000b88ed3208d.tar.bz2
Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
Diffstat (limited to 'arch/arm/plat-orion')
-rw-r--r--arch/arm/plat-orion/Makefile6
-rw-r--r--arch/arm/plat-orion/addr-map.c178
-rw-r--r--arch/arm/plat-orion/gpio.c59
3 files changed, 59 insertions, 184 deletions
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index ad97400ba3ad..2eca54b65906 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -3,12 +3,6 @@
#
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-obj-$(CONFIG_ARCH_MVEBU) += addr-map.o
-obj-$(CONFIG_ARCH_KIRKWOOD) += addr-map.o
-obj-$(CONFIG_ARCH_DOVE) += addr-map.o
-obj-$(CONFIG_ARCH_ORION5X) += addr-map.o
-obj-$(CONFIG_ARCH_MV78XX0) += addr-map.o
-
orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o
obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y)
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
deleted file mode 100644
index 807ac8e5cbc0..000000000000
--- a/arch/arm/plat-orion/addr-map.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * arch/arm/plat-orion/addr-map.c
- *
- * Address map functions for Marvell Orion based SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <plat/addr-map.h>
-
-struct mbus_dram_target_info orion_mbus_dram_info;
-
-const struct mbus_dram_target_info *mv_mbus_dram_info(void)
-{
- return &orion_mbus_dram_info;
-}
-EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
-
-/*
- * DDR target is the same on all Orion platforms.
- */
-#define TARGET_DDR 0
-
-/*
- * Helpers to get DDR bank info
- */
-#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_CTRL_OFF 0x0000
-#define WIN_BASE_OFF 0x0004
-#define WIN_REMAP_LO_OFF 0x0008
-#define WIN_REMAP_HI_OFF 0x000c
-
-#define ATTR_HW_COHERENCY (0x1 << 4)
-
-/*
- * Default implementation
- */
-static void __init __iomem *
-orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
-{
- return cfg->bridge_virt_base + (win << 4);
-}
-
-/*
- * Default implementation
- */
-static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
- const int win)
-{
- if (win < cfg->remappable_wins)
- return 1;
-
- return 0;
-}
-
-void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
- const int win, const u32 base,
- const u32 size, const u8 target,
- const u8 attr, const int remap)
-{
- void __iomem *addr = cfg->win_cfg_base(cfg, win);
- u32 ctrl, base_high, remap_addr;
-
- if (win >= cfg->num_wins) {
- printk(KERN_ERR "setup_cpu_win: trying to allocate window "
- "%d when only %d allowed\n", win, cfg->num_wins);
- }
-
- base_high = base & 0xffff0000;
- ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
- writel(base_high, addr + WIN_BASE_OFF);
- writel(ctrl, addr + WIN_CTRL_OFF);
- if (cfg->cpu_win_can_remap(cfg, win)) {
- if (remap < 0)
- remap_addr = base;
- else
- remap_addr = remap;
- writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
-}
-
-/*
- * Configure a number of windows.
- */
-static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg,
- const struct orion_addr_map_info *info)
-{
- while (info->win != -1) {
- orion_setup_cpu_win(cfg, info->win, info->base, info->size,
- info->target, info->attr, info->remap);
- info++;
- }
-}
-
-static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg)
-{
- void __iomem *addr;
- int i;
-
- for (i = 0; i < cfg->num_wins; i++) {
- addr = cfg->win_cfg_base(cfg, i);
-
- writel(0, addr + WIN_BASE_OFF);
- writel(0, addr + WIN_CTRL_OFF);
- if (cfg->cpu_win_can_remap(cfg, i)) {
- writel(0, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
- }
-}
-
-/*
- * Disable, clear and configure windows.
- */
-void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
- const struct orion_addr_map_info *info)
-{
- if (!cfg->cpu_win_can_remap)
- cfg->cpu_win_can_remap = orion_cpu_win_can_remap;
-
- if (!cfg->win_cfg_base)
- cfg->win_cfg_base = orion_win_cfg_base;
-
- orion_disable_wins(cfg);
-
- if (info)
- orion_setup_cpu_wins(cfg, info);
-}
-
-/*
- * Setup MBUS dram target info.
- */
-void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
- const void __iomem *ddr_window_cpu_base)
-{
- int i;
- int cs;
-
- orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
- for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i));
- u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
-
- /*
- * We only take care of entries for which the chip
- * select is enabled, and that don't have high base
- * address bits set (devices can only access the first
- * 32 bits of the memory).
- */
- if ((size & 1) && !(base & 0xF)) {
- struct mbus_dram_window *w;
-
- w = &orion_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- if (cfg->hw_io_coherency)
- w->mbus_attr |= ATTR_HW_COHERENCY;
- w->base = base & 0xffff0000;
- w->size = (size | 0x0000ffff) + 1;
- }
- }
- orion_mbus_dram_info.num_cs = cs;
-}
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index c29ee7ea200b..e39c2ba6e2fb 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -439,6 +439,64 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
}
}
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct orion_gpio_chip *ochip =
+ container_of(chip, struct orion_gpio_chip, chip);
+ u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
+ int i;
+
+ out = readl_relaxed(GPIO_OUT(ochip));
+ io_conf = readl_relaxed(GPIO_IO_CONF(ochip));
+ blink = readl_relaxed(GPIO_BLINK_EN(ochip));
+ in_pol = readl_relaxed(GPIO_IN_POL(ochip));
+ data_in = readl_relaxed(GPIO_DATA_IN(ochip));
+ cause = readl_relaxed(GPIO_EDGE_CAUSE(ochip));
+ edg_msk = readl_relaxed(GPIO_EDGE_MASK(ochip));
+ lvl_msk = readl_relaxed(GPIO_LEVEL_MASK(ochip));
+
+ for (i = 0; i < chip->ngpio; i++) {
+ const char *label;
+ u32 msk;
+ bool is_out;
+
+ label = gpiochip_is_requested(chip, i);
+ if (!label)
+ continue;
+
+ msk = 1 << i;
+ is_out = !(io_conf & msk);
+
+ seq_printf(s, " gpio-%-3d (%-20.20s)", chip->base + i, label);
+
+ if (is_out) {
+ seq_printf(s, " out %s %s\n",
+ out & msk ? "hi" : "lo",
+ blink & msk ? "(blink )" : "");
+ continue;
+ }
+
+ seq_printf(s, " in %s (act %s) - IRQ",
+ (data_in ^ in_pol) & msk ? "hi" : "lo",
+ in_pol & msk ? "lo" : "hi");
+ if (!((edg_msk | lvl_msk) & msk)) {
+ seq_printf(s, " disabled\n");
+ continue;
+ }
+ if (edg_msk & msk)
+ seq_printf(s, " edge ");
+ if (lvl_msk & msk)
+ seq_printf(s, " level");
+ seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear ");
+ }
+}
+#else
+#define orion_gpio_dbg_show NULL
+#endif
+
void __init orion_gpio_init(struct device_node *np,
int gpio_base, int ngpio,
void __iomem *base, int mask_offset,
@@ -471,6 +529,7 @@ void __init orion_gpio_init(struct device_node *np,
#ifdef CONFIG_OF
ochip->chip.of_node = np;
#endif
+ ochip->chip.dbg_show = orion_gpio_dbg_show;
spin_lock_init(&ochip->lock);
ochip->base = (void __iomem *)base;