Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: global cleanups" from Arnd Bergmann:
 "Quite a bit of code gets removed, and some stuff moved around, mostly
  the old samsung s3c24xx stuff.  There should be no functional changes
  in this series otherwise.  Some cleanups have dependencies on other
  arm-soc branches and will be sent in the second round.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up trivial conflicts mainly due to #include's being changes on
both sides.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
  ep93xx: Remove unnecessary includes of ep93xx-regs.h
  ep93xx: Move EP93XX_SYSCON defines to SoC private header
  ep93xx: Move crunch code to mach-ep93xx directory
  ep93xx: Make syscon access functions private to SoC
  ep93xx: Configure GPIO ports in core code
  ep93xx: Move peripheral defines to local SoC header
  ep93xx: Convert the watchdog driver into a platform device.
  ep93xx: Use ioremap for backlight driver
  ep93xx: Move GPIO defines to gpio-ep93xx.h
  ep93xx: Don't use system controller defines in audio drivers
  ep93xx: Move PHYS_BASE defines to local SoC header file
  ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
  ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
  PM / devfreq: update the name of EXYNOS clock registers that were omitted
  PM / devfreq: update the name of EXYNOS clock register
  ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
  ARM: EXYNOS: use static declaration on regarding clock
  ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
  ARM: OMAP2+: Fix build error after merge
  ARM: S3C24XX: remove call to s3c24xx_setup_clocks
  ...

17 files changed, 91 insertions, 336 deletions

diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 5f0f2292b7fb..5068fe5a6910 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -21,6 +21,7 @@
 
 #include <asm/sched_clock.h>
 
+#include <plat/hardware.h>
 #include <plat/common.h>
 #include <plat/board.h>
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index cb856fe0434a..74300ae29b71 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -164,6 +164,8 @@ static inline void set_gdma_dev(int req, int dev)
 }
 #else
 #define set_gdma_dev(req, dev)	do {} while (0)
+#define omap_readl(reg)		0
+#define omap_writel(val, reg)	do {} while (0)
 #endif
 
 void omap_set_dma_priority(int lch, int dst_port, int priority)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 0b77fe87e010..652139c0339e 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -43,6 +43,8 @@
 
 #include <plat/dmtimer.h>
 
+#include <mach/hardware.h>
+
 static LIST_HEAD(omap_timer_list);
 static DEFINE_SPINLOCK(dm_timer_lock);
 
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 9e86ee0aed0a..cb75b657b04b 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -162,13 +162,6 @@
 				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
 				 IH_GPIO_BASE + (nr))
 
-#define METHOD_MPUIO		0
-#define METHOD_GPIO_1510	1
-#define METHOD_GPIO_1610	2
-#define METHOD_GPIO_7XX		3
-#define METHOD_GPIO_24XX	5
-#define METHOD_GPIO_44XX	6
-
 struct omap_gpio_dev_attr {
 	int bank_width;		/* GPIO bank width */
 	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
@@ -184,10 +177,21 @@ struct omap_gpio_reg_offs {
 	u16 irqstatus;
 	u16 irqstatus2;
 	u16 irqenable;
+	u16 irqenable2;
 	u16 set_irqenable;
 	u16 clr_irqenable;
 	u16 debounce;
 	u16 debounce_en;
+	u16 ctrl;
+	u16 wkup_en;
+	u16 leveldetect0;
+	u16 leveldetect1;
+	u16 risingdetect;
+	u16 fallingdetect;
+	u16 irqctrl;
+	u16 edgectrl1;
+	u16 edgectrl2;
+	u16 pinctrl;
 
 	bool irqenable_inv;
 };
@@ -198,19 +202,20 @@ struct omap_gpio_platform_data {
 	int bank_width;		/* GPIO bank width */
 	int bank_stride;	/* Only needed for omap1 MPUIO */
 	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
+	bool loses_context;	/* whether the bank would ever lose context */
+	bool is_mpuio;		/* whether the bank is of type MPUIO */
+	u32 non_wakeup_gpios;
 
 	struct omap_gpio_reg_offs *regs;
-};
 
-/* TODO: Analyze removing gpio_bank_count usage from driver code */
-extern int gpio_bank_count;
+	/* Return context loss count due to PM states changing */
+	int (*get_context_loss_count)(struct device *dev);
+};
 
 extern void omap2_gpio_prepare_for_idle(int off_mode);
 extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
-extern void omap_gpio_save_context(void);
-extern void omap_gpio_restore_context(void);
 /*-------------------------------------------------------------------------*/
 
 /* Wrappers for "new style" GPIO calls, using the new infrastructure
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index e897978371c2..537b05ae1f51 100644
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -43,6 +43,12 @@
 #endif
 #include <plat/serial.h>
 
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
 /*
  * ---------------------------------------------------------------------------
  * Common definitions for all OMAP processors
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
deleted file mode 100644
index 0696bae1818b..000000000000
--- a/arch/arm/plat-omap/include/plat/io.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from arch/arm/mach-sa1100/include/mach/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)		(x)
-#else
-#define IOMEM(x)		((void __force __iomem *)(x))
-#endif
-
-#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
-
-#define OMAP2_L3_IO_OFFSET	0x90000000
-#define OMAP2_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
-
-
-#define OMAP2_L4_IO_OFFSET	0xb2000000
-#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
-
-#define OMAP4_L3_IO_OFFSET	0xb4000000
-#define OMAP4_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
-
-#define AM33XX_L4_WK_IO_OFFSET	0xb5000000
-#define AM33XX_L4_WK_IO_ADDRESS(pa)	IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET)
-
-#define OMAP4_L3_PER_IO_OFFSET	0xb1100000
-#define OMAP4_L3_PER_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
-
-#define OMAP4_GPMC_IO_OFFSET		0xa9000000
-#define OMAP4_GPMC_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
-
-#define OMAP2_EMU_IO_OFFSET		0xaa800000	/* Emulation */
-#define OMAP2_EMU_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
-
-/*
- * ----------------------------------------------------------------------------
- * Omap1 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1_IO_PHYS		0xFFFB0000
-#define OMAP1_IO_SIZE		0x40000
-#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
-
-/*
- * ----------------------------------------------------------------------------
- * Omap2 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 --> 0xf8000000*/
-#define L3_24XX_VIRT	(L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
-#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 --> 0xfa000000 */
-#define L4_24XX_VIRT	(L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
-
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE	/* 0x49000000 --> 0xfb000000 */
-#define L4_WK_243X_VIRT		(L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE
-#define OMAP243X_GPMC_VIRT	(OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
-						/* 0x6e000000 --> 0xfe000000 */
-#define OMAP243X_GPMC_SIZE	SZ_1M
-#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-						/* 0x6D000000 --> 0xfd000000 */
-#define OMAP243X_SDRC_VIRT	(OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SDRC_SIZE	SZ_1M
-#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-						/* 0x6c000000 --> 0xfc000000 */
-#define OMAP243X_SMS_VIRT	(OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SMS_SIZE	SZ_1M
-
-/* 2420 IVA */
-#define DSP_MEM_2420_PHYS	OMAP2420_DSP_MEM_BASE
-						/* 0x58000000 --> 0xfc100000 */
-#define DSP_MEM_2420_VIRT	0xfc100000
-#define DSP_MEM_2420_SIZE	0x28000
-#define DSP_IPI_2420_PHYS	OMAP2420_DSP_IPI_BASE
-						/* 0x59000000 --> 0xfc128000 */
-#define DSP_IPI_2420_VIRT	0xfc128000
-#define DSP_IPI_2420_SIZE	SZ_4K
-#define DSP_MMU_2420_PHYS	OMAP2420_DSP_MMU_BASE
-						/* 0x5a000000 --> 0xfc129000 */
-#define DSP_MMU_2420_VIRT	0xfc129000
-#define DSP_MMU_2420_SIZE	SZ_4K
-
-/* 2430 IVA2.1 - currently unmapped */
-
-/*
- * ----------------------------------------------------------------------------
- * Omap3 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 --> 0xf8000000 */
-#define L3_34XX_VIRT		(L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
-#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 --> 0xfa000000 */
-#define L4_34XX_VIRT		(L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * ----------------------------------------------------------------------------
- * AM33XX specific IO mapping
- * ----------------------------------------------------------------------------
- */
-#define L4_WK_AM33XX_PHYS	L4_WK_AM33XX_BASE
-#define L4_WK_AM33XX_VIRT	(L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET)
-#define L4_WK_AM33XX_SIZE	SZ_4M   /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE
-						/* 0x49000000 --> 0xfb000000 */
-#define L4_PER_34XX_VIRT	(L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_PER_34XX_SIZE	SZ_1M
-
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE
-						/* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_34XX_VIRT	(L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_34XX_SIZE	SZ_8M
-
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE
-						/* 0x6e000000 --> 0xfe000000 */
-#define OMAP34XX_GPMC_VIRT	(OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP34XX_GPMC_SIZE	SZ_1M
-
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE
-						/* 0x6c000000 --> 0xfc000000 */
-#define OMAP343X_SMS_VIRT	(OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP343X_SMS_SIZE	SZ_1M
-
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE
-						/* 0x6D000000 --> 0xfd000000 */
-#define OMAP343X_SDRC_VIRT	(OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP343X_SDRC_SIZE	SZ_1M
-
-/* 3430 IVA - currently unmapped */
-
-/*
- * ----------------------------------------------------------------------------
- * Omap4 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS		L3_44XX_BASE	/* 0x44000000 --> 0xf8000000 */
-#define L3_44XX_VIRT		(L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
-#define L3_44XX_SIZE		SZ_1M
-
-#define L4_44XX_PHYS		L4_44XX_BASE	/* 0x4a000000 --> 0xfc000000 */
-#define L4_44XX_VIRT		(L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_44XX_SIZE		SZ_4M
-
-#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
-						/* 0x48000000 --> 0xfa000000 */
-#define L4_PER_44XX_VIRT	(L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_PER_44XX_SIZE	SZ_4M
-
-#define L4_ABE_44XX_PHYS	L4_ABE_44XX_BASE
-						/* 0x49000000 --> 0xfb000000 */
-#define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_ABE_44XX_SIZE	SZ_1M
-
-#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
-						/* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_44XX_VIRT	(L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_44XX_SIZE	SZ_8M
-
-#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
-						/* 0x50000000 --> 0xf9000000 */
-#define OMAP44XX_GPMC_VIRT	(OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
-#define OMAP44XX_GPMC_SIZE	SZ_1M
-
-
-#define OMAP44XX_EMIF1_PHYS	OMAP44XX_EMIF1_BASE
-						/* 0x4c000000 --> 0xfd100000 */
-#define OMAP44XX_EMIF1_VIRT	(OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
-#define OMAP44XX_EMIF1_SIZE	SZ_1M
-
-#define OMAP44XX_EMIF2_PHYS	OMAP44XX_EMIF2_BASE
-						/* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_SIZE	SZ_1M
-#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
-
-#define OMAP44XX_DMM_PHYS	OMAP44XX_DMM_BASE
-						/* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_SIZE	SZ_1M
-#define OMAP44XX_DMM_VIRT	(OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
-/*
- * ----------------------------------------------------------------------------
- * Omap specific register access
- * ----------------------------------------------------------------------------
- */
-
-#ifndef __ASSEMBLER__
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-
-extern u8 omap_readb(u32 pa);
-extern u16 omap_readw(u32 pa);
-extern u32 omap_readl(u32 pa);
-extern void omap_writeb(u8 v, u32 pa);
-extern void omap_writew(u16 v, u32 pa);
-extern void omap_writel(u32 v, u32 pa);
-
-struct omap_sdrc_params;
-extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-				      struct omap_sdrc_params *sdrc_cs1);
-
-extern void __init omap_init_consistent_dma_size(void);
-
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
index 793ce9d53294..a6b21eddb212 100644
--- a/arch/arm/plat-omap/include/plat/keypad.h
+++ b/arch/arm/plat-omap/include/plat/keypad.h
@@ -12,6 +12,8 @@
 
 #ifndef CONFIG_ARCH_OMAP1
 #warning Please update the board to use matrix-keypad driver
+#define omap_readw(reg)		0
+#define omap_writew(val, reg)	do {} while (0)
 #endif
 #include <linux/input/matrix_keypad.h>
 
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
index 3d51b18131cc..a357eb26bd25 100644
--- a/arch/arm/plat-omap/include/plat/mcspi.h
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
@@ -18,9 +18,6 @@ struct omap2_mcspi_dev_attr {
 
 struct omap2_mcspi_device_config {
 	unsigned turbo_mode:1;
-
-	/* Do we want one channel enabled at the same time? */
-	unsigned single_channel:1;
 };
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 05f7615b61f0..4327b2c90c3d 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -36,7 +36,7 @@
 
 #include <plat/omap_hwmod.h>
 
-extern struct device omap_device_parent;
+extern struct dev_pm_domain omap_device_pm_domain;
 
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 198d1e6a4a6c..b073e5f2b190 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -110,7 +110,6 @@ struct omap_board_data;
 struct omap_uart_port_info;
 
 extern void omap_serial_init(void);
-extern int omap_uart_can_sleep(void);
 extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
 extern void omap_serial_init_port(struct omap_board_data *bdata,
 		struct omap_uart_port_info *platform_data);
diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h
index d2fcd789bb9a..1b4b2da86203 100644
--- a/arch/arm/plat-omap/include/plat/tc.h
+++ b/arch/arm/plat-omap/include/plat/tc.h
@@ -84,23 +84,6 @@
 #define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
 #define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
 
-/* Almost all documentation for chip and board memory maps assumes
- * BM is clear.  Most devel boards have a switch to control booting
- * from NOR flash (using external chipselect 3) rather than mask ROM,
- * which uses BM to interchange the physical CS0 and CS3 addresses.
- */
-static inline u32 omap_cs0_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			?  OMAP_CS3_PHYS : 0;
-}
-
-static inline u32 omap_cs3_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			? 0 : OMAP_CS3_PHYS;
-}
-
 #endif	/* __ASSEMBLER__ */
 
 #endif	/* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index dc864b580da0..d0fc9f4dc155 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -3,6 +3,7 @@
 #ifndef	__ASM_ARCH_OMAP_USB_H
 #define	__ASM_ARCH_OMAP_USB_H
 
+#include <linux/io.h>
 #include <linux/usb/musb.h>
 #include <plat/board.h>
 
@@ -105,6 +106,46 @@ extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
 extern int omap4430_phy_suspend(struct device *dev, int suspend);
+
+/*
+ * NOTE: Please update omap USB drivers to use ioremap + read/write
+ */
+
+#define OMAP2_L4_IO_OFFSET	0xb2000000
+#define IOMEM(x)		((void __force __iomem *)(x))
+#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET)
+
+static inline u8 omap_readb(u32 pa)
+{
+	return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline u16 omap_readw(u32 pa)
+{
+	return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline u32 omap_readl(u32 pa)
+{
+	return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline void omap_writeb(u8 v, u32 pa)
+{
+	__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
+
+static inline void omap_writew(u16 v, u32 pa)
+{
+	__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline void omap_writel(u32 v, u32 pa)
+{
+	__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
 #endif
 
 extern void am35x_musb_reset(void);
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 0d4aa0d5876c..cff8712122bb 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -26,8 +26,11 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/system.h>
 #include <linux/spinlock.h>
+
+#include <asm/system.h>
+
+#include <plat/cpu.h>
 #include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 3dc3801aace4..5a97b4d98d41 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -319,7 +319,7 @@ int omap_pm_get_dev_context_loss_count(struct device *dev)
 	if (WARN_ON(!dev))
 		return -ENODEV;
 
-	if (dev->parent == &omap_device_parent) {
+	if (dev->pm_domain == &omap_device_pm_domain) {
 		count = omap_device_get_context_loss_count(pdev);
 	} else {
 		WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 2d00ab01d150..6de28ea3cd65 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -314,8 +314,6 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od,
 }
 
 
-static struct dev_pm_domain omap_device_pm_domain;
-
 /**
  * omap_device_build_from_dt - build an omap_device with multiple hwmods
  * @pdev_name: name of the platform_device driver to use
@@ -756,14 +754,12 @@ static int _od_suspend_noirq(struct device *dev)
 	struct omap_device *od = to_omap_device(pdev);
 	int ret;
 
-	if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)
-		return pm_generic_suspend_noirq(dev);
-
 	ret = pm_generic_suspend_noirq(dev);
 
 	if (!ret && !pm_runtime_status_suspended(dev)) {
 		if (pm_generic_runtime_suspend(dev) == 0) {
-			omap_device_idle(pdev);
+			if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
+				omap_device_idle(pdev);
 			od->flags |= OMAP_DEVICE_SUSPENDED;
 		}
 	}
@@ -776,13 +772,11 @@ static int _od_resume_noirq(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
 
-	if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)
-		return pm_generic_resume_noirq(dev);
-
 	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
 	    !pm_runtime_status_suspended(dev)) {
 		od->flags &= ~OMAP_DEVICE_SUSPENDED;
-		omap_device_enable(pdev);
+		if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
+			omap_device_enable(pdev);
 		pm_generic_runtime_resume(dev);
 	}
 
@@ -793,7 +787,7 @@ static int _od_resume_noirq(struct device *dev)
 #define _od_resume_noirq NULL
 #endif
 
-static struct dev_pm_domain omap_device_pm_domain = {
+struct dev_pm_domain omap_device_pm_domain = {
 	.ops = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   _od_runtime_idle)
@@ -815,7 +809,6 @@ int omap_device_register(struct platform_device *pdev)
 {
 	pr_debug("omap_device: %s: registering\n", pdev->name);
 
-	pdev->dev.parent = &omap_device_parent;
 	pdev->dev.pm_domain = &omap_device_pm_domain;
 	return platform_device_add(pdev);
 }
@@ -1124,11 +1117,6 @@ int omap_device_enable_clocks(struct omap_device *od)
 	return 0;
 }
 
-struct device omap_device_parent = {
-	.init_name	= "omap",
-	.parent         = &platform_bus,
-};
-
 static struct notifier_block platform_nb = {
 	.notifier_call = _omap_device_notifier_call,
 };
@@ -1136,6 +1124,6 @@ static struct notifier_block platform_nb = {
 static int __init omap_device_init(void)
 {
 	bus_register_notifier(&platform_bus_type, &platform_nb);
-	return device_register(&omap_device_parent);
+	return 0;
 }
 core_initcall(omap_device_init);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 596f2224e15a..eec98afa0f83 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -31,11 +31,10 @@
 
 #include "sram.h"
 
-/* XXX These "sideways" includes are a sign that something is wrong */
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-# include "../mach-omap2/prm2xxx_3xxx.h"
-# include "../mach-omap2/sdrc.h"
-#endif
+/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
+#include "../mach-omap2/iomap.h"
+#include "../mach-omap2/prm2xxx_3xxx.h"
+#include "../mach-omap2/sdrc.h"
 
 #define OMAP1_SRAM_PA		0x20000000
 #define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index f3570884883e..d2bbfd1cb0b5 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -29,6 +29,10 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 
+#include <mach/hardware.h>
+
+#include "../mach-omap2/common.h"
+
 #ifdef	CONFIG_ARCH_OMAP_OTG
 
 void __init