Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...

3 files changed, 0 insertions, 145 deletions

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index d055db32ffcb..3e27bffb352d 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -63,32 +63,6 @@ config OMAP_RESET_CLOCKS
 	  probably do not want this option enabled until your
 	  device drivers work properly.
 
-config OMAP_MUX
-	bool "OMAP multiplexing support"
-	depends on ARCH_OMAP
-	default y
-	help
-	  Pin multiplexing support for OMAP boards. If your bootloader
-	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
-	  say Y.
-
-config OMAP_MUX_DEBUG
-	bool "Multiplexing debug output"
-	depends on OMAP_MUX
-	help
-	  Makes the multiplexing functions print out a lot of debug info.
-	  This is useful if you want to find out the correct values of the
-	  multiplexing registers.
-
-config OMAP_MUX_WARNINGS
-	bool "Warn about pins the bootloader didn't set up"
-	depends on OMAP_MUX
-	default y
-	help
-	  Choose Y here to warn whenever driver initialization logic needs
-	  to change the pin multiplexing setup.	 When there are no warnings
-	  printed, it's safe to deselect OMAP_MUX for your product.
-
 config OMAP_MPU_TIMER
 	bool "Use mpu timer"
 	depends on ARCH_OMAP1
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 97a50e8883f9..47e186729d44 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -11,6 +11,3 @@ obj-y := sram.o dma.o counter_32k.o
 
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
-obj-y += $(i2c-omap-m) $(i2c-omap-y)
-
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
deleted file mode 100644
index 58213d9714cd..000000000000
--- a/arch/arm/plat-omap/i2c.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/i2c.c
- *
- * Helper module for board specific I2C bus registration
- *
- * Copyright (C) 2007 Nokia Corporation.
- *
- * Contact: Jarkko Nikula <jhnikula@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c-omap.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <plat/i2c.h>
-
-#define OMAP_I2C_MAX_CONTROLLERS 4
-static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-
-#define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
-
-/**
- * omap_i2c_bus_setup - Process command line options for the I2C bus speed
- * @str: String of options
- *
- * This function allow to override the default I2C bus speed for given I2C
- * bus with a command line option.
- *
- * Format: i2c_bus=bus_id,clkrate (in kHz)
- *
- * Returns 1 on success, 0 otherwise.
- */
-static int __init omap_i2c_bus_setup(char *str)
-{
-	int ints[3];
-
-	get_options(str, 3, ints);
-	if (ints[0] < 2 || ints[1] < 1 ||
-			ints[1] > OMAP_I2C_MAX_CONTROLLERS)
-		return 0;
-	i2c_pdata[ints[1] - 1].clkrate = ints[2];
-	i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
-
-	return 1;
-}
-__setup("i2c_bus=", omap_i2c_bus_setup);
-
-/*
- * Register busses defined in command line but that are not registered with
- * omap_register_i2c_bus from board initialization code.
- */
-int __init omap_register_i2c_bus_cmdline(void)
-{
-	int i, err = 0;
-
-	for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
-		if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
-			i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-			err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
-			if (err)
-				goto out;
-		}
-
-out:
-	return err;
-}
-
-/**
- * omap_register_i2c_bus - register I2C bus with device descriptors
- * @bus_id: bus id counting from number 1
- * @clkrate: clock rate of the bus in kHz
- * @info: pointer into I2C device descriptor table or NULL
- * @len: number of descriptors in the table
- *
- * Returns 0 on success or an error code.
- */
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
-{
-	int err;
-
-	BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS);
-
-	if (info) {
-		err = i2c_register_board_info(bus_id, info, len);
-		if (err)
-			return err;
-	}
-
-	if (!i2c_pdata[bus_id - 1].clkrate)
-		i2c_pdata[bus_id - 1].clkrate = clkrate;
-
-	i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-
-	return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
-}