Merge commit 'v2.6.37-rc8' into x86/apic

Conflicts:
	arch/x86/include/asm/io_apic.h

Merge reason: move to a fresh -rc, resolve the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

25 files changed, 382 insertions, 474 deletions

diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 9776b41ad76f..a9d69a09920d 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -47,6 +47,7 @@ struct omap_globals {
 	unsigned long   sdrc;           /* SDRAM Controller */
 	unsigned long   sms;            /* SDRAM Memory Scheduler */
 	unsigned long   ctrl;           /* System Control Module */
+	unsigned long   ctrl_pad;	/* PAD Control Module */
 	unsigned long   prm;            /* Power and Reset Management */
 	unsigned long   cm;             /* Clock Management */
 	unsigned long   cm2;
@@ -66,7 +67,6 @@ void omap2_set_globals_tap(struct omap_globals *);
 void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
-void omap2_set_globals_uart(struct omap_globals *);
 
 void omap3_map_io(void);
 
@@ -91,7 +91,8 @@ void omap3_map_io(void);
 })
 
 extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_dsp_device(void);
+extern struct device *omap2_get_iva_device(void);
 extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
 
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
deleted file mode 100644
index 131bf405c2f6..000000000000
--- a/arch/arm/plat-omap/include/plat/control.h
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/control.h
- *
- * OMAP2/3/4 System Control Module definitions
- *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
-#include <mach/io.h>
-
-#ifndef __ASSEMBLY__
-#define OMAP242X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-#else
-#define OMAP242X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-#endif /* __ASSEMBLY__ */
-
-/*
- * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
- * OMAP24XX and OMAP34XX.
- */
-
-/* Control submodule offsets */
-
-#define OMAP2_CONTROL_INTERFACE		0x000
-#define OMAP2_CONTROL_PADCONFS		0x030
-#define OMAP2_CONTROL_GENERAL		0x270
-#define OMAP343X_CONTROL_MEM_WKUP	0x600
-#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
-#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
-
-/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
-
-#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
-
-/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
-#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
-#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
-#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
-#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
-#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
-#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
-#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
-#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
-#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
-#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
-#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
-#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
-
-/* 242x-only CONTROL_GENERAL register offsets */
-#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
-#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
-
-/* 243x-only CONTROL_GENERAL register offsets */
-/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
-#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
-#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
-#define OMAP243X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x0230)
-
-/* 24xx-only CONTROL_GENERAL register offsets */
-#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
-#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
-#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
-#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
-#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
-#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
-#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
-#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
-#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
-#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
-#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
-#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
-
-#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
-
-/* 34xx-only CONTROL_GENERAL register offsets */
-#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
-#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
-#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
-#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
-#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
-#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
-#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
-#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
-#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
-#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP343X_CONTROL_DEBOBS(i)	(OMAP2_CONTROL_GENERAL + 0x01B0 \
-					+ ((i) >> 1) * 4 + (!((i) & 1)) * 2)
-#define OMAP343X_CONTROL_PROG_IO0	(OMAP2_CONTROL_GENERAL + 0x01D4)
-#define OMAP343X_CONTROL_PROG_IO1	(OMAP2_CONTROL_GENERAL + 0x01D8)
-#define OMAP343X_CONTROL_DSS_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E0)
-#define OMAP343X_CONTROL_CORE_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E4)
-#define OMAP343X_CONTROL_PER_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E8)
-#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01EC)
-#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02B0)
-#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02B4)
-#define OMAP343X_CONTROL_SRAMLDO4	(OMAP2_CONTROL_GENERAL + 0x02B8)
-#define OMAP343X_CONTROL_SRAMLDO5	(OMAP2_CONTROL_GENERAL + 0x02C0)
-#define OMAP343X_CONTROL_CSI		(OMAP2_CONTROL_GENERAL + 0x02C4)
-
-/* AM35XX only CONTROL_GENERAL register offsets */
-#define AM35XX_CONTROL_MSUSPENDMUX_6    (OMAP2_CONTROL_GENERAL + 0x0038)
-#define AM35XX_CONTROL_DEVCONF2         (OMAP2_CONTROL_GENERAL + 0x0310)
-#define AM35XX_CONTROL_DEVCONF3         (OMAP2_CONTROL_GENERAL + 0x0314)
-#define AM35XX_CONTROL_CBA_PRIORITY     (OMAP2_CONTROL_GENERAL + 0x0320)
-#define AM35XX_CONTROL_LVL_INTR_CLEAR   (OMAP2_CONTROL_GENERAL + 0x0324)
-#define AM35XX_CONTROL_IP_SW_RESET      (OMAP2_CONTROL_GENERAL + 0x0328)
-#define AM35XX_CONTROL_IPSS_CLK_CTRL    (OMAP2_CONTROL_GENERAL + 0x032C)
-
-/* 34xx PADCONF register offsets */
-#define OMAP343X_PADCONF_ETK(i)		(OMAP2_CONTROL_PADCONFS + 0x5a8 + \
-						(i)*2)
-#define OMAP343X_PADCONF_ETK_CLK	OMAP343X_PADCONF_ETK(0)
-#define OMAP343X_PADCONF_ETK_CTL	OMAP343X_PADCONF_ETK(1)
-#define OMAP343X_PADCONF_ETK_D0		OMAP343X_PADCONF_ETK(2)
-#define OMAP343X_PADCONF_ETK_D1		OMAP343X_PADCONF_ETK(3)
-#define OMAP343X_PADCONF_ETK_D2		OMAP343X_PADCONF_ETK(4)
-#define OMAP343X_PADCONF_ETK_D3		OMAP343X_PADCONF_ETK(5)
-#define OMAP343X_PADCONF_ETK_D4		OMAP343X_PADCONF_ETK(6)
-#define OMAP343X_PADCONF_ETK_D5		OMAP343X_PADCONF_ETK(7)
-#define OMAP343X_PADCONF_ETK_D6		OMAP343X_PADCONF_ETK(8)
-#define OMAP343X_PADCONF_ETK_D7		OMAP343X_PADCONF_ETK(9)
-#define OMAP343X_PADCONF_ETK_D8		OMAP343X_PADCONF_ETK(10)
-#define OMAP343X_PADCONF_ETK_D9		OMAP343X_PADCONF_ETK(11)
-#define OMAP343X_PADCONF_ETK_D10	OMAP343X_PADCONF_ETK(12)
-#define OMAP343X_PADCONF_ETK_D11	OMAP343X_PADCONF_ETK(13)
-#define OMAP343X_PADCONF_ETK_D12	OMAP343X_PADCONF_ETK(14)
-#define OMAP343X_PADCONF_ETK_D13	OMAP343X_PADCONF_ETK(15)
-#define OMAP343X_PADCONF_ETK_D14	OMAP343X_PADCONF_ETK(16)
-#define OMAP343X_PADCONF_ETK_D15	OMAP343X_PADCONF_ETK(17)
-
-/* 34xx GENERAL_WKUP regist offsets */
-#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
-						0x008 + (i))
-#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
-#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C)
-#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010)
-#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
-#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
-
-/* 34xx D2D idle-related pins, handled by PM core */
-#define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
-#define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
-
-/* 44xx control status register offset */
-#define OMAP44XX_CONTROL_STATUS		0x2c4
-
-/* 44xx-only CONTROL_GENERAL register offsets */
-#define OMAP44XX_CONTROL_MMC1			0x628
-#define OMAP44XX_CONTROL_PBIAS_LITE		0x600
-/*
- * REVISIT: This list of registers is not comprehensive - there are more
- * that should be added.
- */
-
-/*
- * Control module register bit defines - these should eventually go into
- * their own regbits file.  Some of these will be complicated, depending
- * on the device type (general-purpose, emulator, test, secure, bad, other)
- * and the security mode (secure, non-secure, don't care)
- */
-/* CONTROL_DEVCONF0 bits */
-#define OMAP2_MMCSDIO1ADPCLKISEL	(1 << 24) /* MMC1 loop back clock */
-#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
-#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
-#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
-
-/* CONTROL_DEVCONF1 bits */
-#define OMAP243X_MMC1_ACTIVE_OVERWRITE	(1 << 31)
-#define OMAP2_MMCSDIO2ADPCLKISEL	(1 << 6) /* MMC2 loop back clock */
-#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
-#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
-#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
-
-/* CONTROL_STATUS bits */
-#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
-#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
-#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
-#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
-#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
-#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
-#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
-
-/* CONTROL_PBIAS_LITE bits */
-#define OMAP343X_PBIASLITESUPPLY_HIGH1	(1 << 15)
-#define OMAP343X_PBIASLITEVMODEERROR1	(1 << 11)
-#define OMAP343X_PBIASSPEEDCTRL1	(1 << 10)
-#define OMAP343X_PBIASLITEPWRDNZ1	(1 << 9)
-#define OMAP343X_PBIASLITEVMODE1	(1 << 8)
-#define OMAP343X_PBIASLITESUPPLY_HIGH0	(1 << 7)
-#define OMAP343X_PBIASLITEVMODEERROR0	(1 << 3)
-#define OMAP2_PBIASSPEEDCTRL0		(1 << 2)
-#define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
-#define OMAP2_PBIASLITEVMODE0		(1 << 0)
-
-/* CONTROL_PBIAS_LITE bits for OMAP4 */
-#define OMAP4_MMC1_PWRDNZ			(1 << 26)
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE		(1 << 25)
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT	(1 << 24)
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR	(1 << 23)
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ		(1 << 22)
-#define OMAP4_MMC1_PBIASLITE_VMODE		(1 << 21)
-#define OMAP4_USBC1_ICUSB_PWRDNZ		(1 << 20)
-
-#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0	(1 << 31)
-#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1	(1 << 30)
-#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2	(1 << 29)
-#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3	(1 << 28)
-#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL	(1 << 27)
-#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL	(1 << 26)
-#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL	(1 << 25)
-
-/* CONTROL_PROG_IO1 bits */
-#define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
-
-/* CONTROL_IVA2_BOOTMOD bits */
-#define OMAP3_IVA2_BOOTMOD_SHIFT	0
-#define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
-#define OMAP3_IVA2_BOOTMOD_IDLE		(0x1 << 0)
-
-/* CONTROL_PADCONF_X bits */
-#define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
-#define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
-
-#define OMAP343X_SCRATCHPAD_ROM		(OMAP343X_CTRL_BASE + 0x860)
-#define OMAP343X_SCRATCHPAD		(OMAP343X_CTRL_BASE + 0x910)
-#define OMAP343X_SCRATCHPAD_ROM_OFFSET	0x19C
-
-/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
-#define AM35XX_USBOTG_VBUSP_CLK_SHIFT   0
-#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT   1
-#define AM35XX_VPFE_VBUSP_CLK_SHIFT     2
-#define AM35XX_HECC_VBUSP_CLK_SHIFT     3
-#define AM35XX_USBOTG_FCLK_SHIFT        8
-#define AM35XX_CPGMAC_FCLK_SHIFT        9
-#define AM35XX_VPFE_FCLK_SHIFT          10
-
-/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
-#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR	BIT(0)
-#define AM35XX_CPGMAC_C0_RX_PULSE_CLR	BIT(1)
-#define AM35XX_CPGMAC_C0_RX_THRESH_CLR	BIT(2)
-#define AM35XX_CPGMAC_C0_TX_PULSE_CLR	BIT(3)
-#define AM35XX_USBOTGSS_INT_CLR		BIT(4)
-#define AM35XX_VPFE_CCDC_VD0_INT_CLR	BIT(5)
-#define AM35XX_VPFE_CCDC_VD1_INT_CLR	BIT(6)
-#define AM35XX_VPFE_CCDC_VD2_INT_CLR	BIT(7)
-
-/*AM35XX CONTROL_IP_SW_RESET bits*/
-#define AM35XX_USBOTGSS_SW_RST		BIT(0)
-#define AM35XX_CPGMACSS_SW_RST		BIT(1)
-#define AM35XX_VPFE_VBUSP_SW_RST	BIT(2)
-#define AM35XX_HECC_SW_RST		BIT(3)
-#define AM35XX_VPFE_PCLK_SW_RST		BIT(4)
-
-/*
- * CONTROL OMAP STATUS register to identify OMAP3 features
- */
-#define OMAP3_CONTROL_OMAP_STATUS	0x044c
-
-#define OMAP3_SGX_SHIFT			13
-#define OMAP3_SGX_MASK			(3 << OMAP3_SGX_SHIFT)
-#define		FEAT_SGX_FULL		0
-#define		FEAT_SGX_HALF		1
-#define		FEAT_SGX_NONE		2
-
-#define OMAP3_IVA_SHIFT			12
-#define OMAP3_IVA_MASK			(1 << OMAP3_SGX_SHIFT)
-#define		FEAT_IVA		0
-#define		FEAT_IVA_NONE		1
-
-#define OMAP3_L2CACHE_SHIFT		10
-#define OMAP3_L2CACHE_MASK		(3 << OMAP3_L2CACHE_SHIFT)
-#define		FEAT_L2CACHE_NONE	0
-#define		FEAT_L2CACHE_64KB	1
-#define		FEAT_L2CACHE_128KB	2
-#define		FEAT_L2CACHE_256KB	3
-
-#define OMAP3_ISP_SHIFT			5
-#define OMAP3_ISP_MASK			(1<< OMAP3_ISP_SHIFT)
-#define		FEAT_ISP		0
-#define		FEAT_ISP_NONE		1
-
-#define OMAP3_NEON_SHIFT		4
-#define OMAP3_NEON_MASK			(1<< OMAP3_NEON_SHIFT)
-#define		FEAT_NEON		0
-#define		FEAT_NEON_NONE		1
-
-
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_ARCH_OMAP2PLUS
-extern void __iomem *omap_ctrl_base_get(void);
-extern u8 omap_ctrl_readb(u16 offset);
-extern u16 omap_ctrl_readw(u16 offset);
-extern u32 omap_ctrl_readl(u16 offset);
-extern void omap_ctrl_writeb(u8 val, u16 offset);
-extern void omap_ctrl_writew(u16 val, u16 offset);
-extern void omap_ctrl_writel(u32 val, u16 offset);
-
-extern void omap3_save_scratchpad_contents(void);
-extern void omap3_clear_scratchpad_contents(void);
-extern u32 *get_restore_pointer(void);
-extern u32 *get_es3_restore_pointer(void);
-extern u32 omap3_arm_context[128];
-extern void omap3_control_save_context(void);
-extern void omap3_control_restore_context(void);
-
-#else
-#define omap_ctrl_base_get()		0
-#define omap_ctrl_readb(x)		0
-#define omap_ctrl_readw(x)		0
-#define omap_ctrl_readl(x)		0
-#define omap_ctrl_writeb(x, y)		WARN_ON(1)
-#define omap_ctrl_writew(x, y)		WARN_ON(1)
-#define omap_ctrl_writel(x, y)		WARN_ON(1)
-#endif
-#endif	/* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_CONTROL_H */
-
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 2e2ae530fced..3fd8b4055727 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -68,10 +68,9 @@ unsigned int omap_rev(void);
 #define OMAP_REVBITS_00		0x00
 #define OMAP_REVBITS_01		0x01
 #define OMAP_REVBITS_02		0x02
-#define OMAP_REVBITS_10		0x10
-#define OMAP_REVBITS_20		0x20
-#define OMAP_REVBITS_30		0x30
-#define OMAP_REVBITS_40		0x40
+#define OMAP_REVBITS_03		0x03
+#define OMAP_REVBITS_04		0x04
+#define OMAP_REVBITS_05		0x05
 
 /*
  * Get the CPU revision for OMAP devices
@@ -363,23 +362,24 @@ IS_OMAP_TYPE(3517, 0x3517)
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
-#define OMAP2420_REV_ES1_0	0x24200024
-#define OMAP2420_REV_ES2_0	0x24201024
+#define OMAP2420_REV_ES1_0	OMAP242X_CLASS
+#define OMAP2420_REV_ES2_0	(OMAP242X_CLASS | (OMAP_REVBITS_01 << 8))
 
 #define OMAP243X_CLASS		0x24300024
-#define OMAP2430_REV_ES1_0	0x24300024
+#define OMAP2430_REV_ES1_0	OMAP243X_CLASS
 
 #define OMAP343X_CLASS		0x34300034
-#define OMAP3430_REV_ES1_0	0x34300034
-#define OMAP3430_REV_ES2_0	0x34301034
-#define OMAP3430_REV_ES2_1	0x34302034
-#define OMAP3430_REV_ES3_0	0x34303034
-#define OMAP3430_REV_ES3_1	0x34304034
-#define OMAP3430_REV_ES3_1_2	0x34305034
-
-#define OMAP3630_REV_ES1_0	0x36300034
-#define OMAP3630_REV_ES1_1	0x36300134
-#define OMAP3630_REV_ES1_2	0x36300234
+#define OMAP3430_REV_ES1_0	OMAP343X_CLASS
+#define OMAP3430_REV_ES2_0	(OMAP343X_CLASS | (OMAP_REVBITS_01 << 8))
+#define OMAP3430_REV_ES2_1	(OMAP343X_CLASS | (OMAP_REVBITS_02 << 8))
+#define OMAP3430_REV_ES3_0	(OMAP343X_CLASS | (OMAP_REVBITS_03 << 8))
+#define OMAP3430_REV_ES3_1	(OMAP343X_CLASS | (OMAP_REVBITS_04 << 8))
+#define OMAP3430_REV_ES3_1_2	(OMAP343X_CLASS | (OMAP_REVBITS_05 << 8))
+
+#define OMAP363X_CLASS		0x36300034
+#define OMAP3630_REV_ES1_0	OMAP363X_CLASS
+#define OMAP3630_REV_ES1_1	(OMAP363X_CLASS | (OMAP_REVBITS_01 << 8))
+#define OMAP3630_REV_ES1_2	(OMAP363X_CLASS | (OMAP_REVBITS_02 << 8))
 
 #define OMAP35XX_CLASS		0x35000034
 #define OMAP3503_REV(v)		(OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
@@ -390,7 +390,8 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define OMAP3517_REV(v)		(OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
 
 #define OMAP443X_CLASS		0x44300044
-#define OMAP4430_REV_ES1_0	0x44300044
+#define OMAP4430_REV_ES1_0	OMAP443X_CLASS
+#define OMAP4430_REV_ES2_0	0x44301044
 
 /*
  * omap_chip bits
@@ -417,10 +418,12 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define CHIP_IS_OMAP4430ES1		(1 << 8)
 #define CHIP_IS_OMAP3630ES1_1           (1 << 9)
 #define CHIP_IS_OMAP3630ES1_2           (1 << 10)
+#define CHIP_IS_OMAP4430ES2		(1 << 11)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
-#define CHIP_IS_OMAP4430		(CHIP_IS_OMAP4430ES1)
+#define CHIP_IS_OMAP4430		(CHIP_IS_OMAP4430ES1 | \
+						 CHIP_IS_OMAP4430ES2)
 
 /*
  * "GE" here represents "greater than or equal to" in terms of ES
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index 8bd15bdb4132..c915a661f1f5 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -81,37 +81,6 @@ enum omap_color_mode {
 	OMAP_DSS_COLOR_ARGB32	= 1 << 11, /* ARGB32 */
 	OMAP_DSS_COLOR_RGBA32	= 1 << 12, /* RGBA32 */
 	OMAP_DSS_COLOR_RGBX32	= 1 << 13, /* RGBx32 */
-
-	OMAP_DSS_COLOR_GFX_OMAP2 =
-		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
-		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
-		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
-		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P,
-
-	OMAP_DSS_COLOR_VID_OMAP2 =
-		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
-		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
-		OMAP_DSS_COLOR_UYVY,
-
-	OMAP_DSS_COLOR_GFX_OMAP3 =
-		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
-		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
-		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
-		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
-		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
-		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
-
-	OMAP_DSS_COLOR_VID1_OMAP3 =
-		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
-		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P |
-		OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
-
-	OMAP_DSS_COLOR_VID2_OMAP3 =
-		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
-		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
-		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
-		OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 |
-		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
 };
 
 enum omap_lcd_display_type {
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index af3a03941add..0cce4ca83aa0 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -319,6 +319,8 @@
 #define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
 #define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
 
+#define OMAP36XX_DMA_UART4_TX		81	/* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX		82	/* S_DMA_81 */
 /*----------------------------------------------------------------------------*/
 
 #define OMAP1_DMA_TOUT_IRQ		(1 << 0)
@@ -335,6 +337,10 @@
 #define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
 
 #define OMAP_DMA_CCR_EN			(1 << 7)
+#define OMAP_DMA_CCR_RD_ACTIVE		(1 << 9)
+#define OMAP_DMA_CCR_WR_ACTIVE		(1 << 10)
+#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC	(1 << 24)
+#define OMAP_DMA_CCR_BUFFERING_DISABLE	(1 << 25)
 
 #define OMAP_DMA_DATA_TYPE_S8		0x00
 #define OMAP_DMA_DATA_TYPE_S16		0x01
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 20f1054c0a80..dfa3aff9761b 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -45,6 +45,8 @@
 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
 
 struct omap_dm_timer;
+extern struct omap_dm_timer *gptimer_wakeup;
+extern struct sys_timer omap_timer;
 struct clk;
 
 int omap_dm_timer_init(void);
diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h
new file mode 100644
index 000000000000..9c604b390f9f
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/dsp.h
@@ -0,0 +1,31 @@
+#ifndef __OMAP_DSP_H__
+#define __OMAP_DSP_H__
+
+#include <linux/types.h>
+
+struct omap_dsp_platform_data {
+	void (*dsp_set_min_opp) (u8 opp_id);
+	u8 (*dsp_get_opp) (void);
+	void (*cpu_set_freq) (unsigned long f);
+	unsigned long (*cpu_get_freq) (void);
+	unsigned long mpu_speed[6];
+
+	/* functions to write and read PRCM registers */
+	void (*dsp_prm_write)(u32, s16 , u16);
+	u32 (*dsp_prm_read)(s16 , u16);
+	u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+	void (*dsp_cm_write)(u32, s16 , u16);
+	u32 (*dsp_cm_read)(s16 , u16);
+	u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+	phys_addr_t phys_mempool_base;
+	phys_addr_t phys_mempool_size;
+};
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void omap_dsp_reserve_sdram_memblock(void);
+#else
+static inline void omap_dsp_reserve_sdram_memblock(void) { }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
new file mode 100644
index 000000000000..872de0bf1e6b
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
+ *
+ * Copyright (C) 2009 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
+
+struct omap_smsc911x_platform_data {
+	int	cs;
+	int	gpio_irq;
+	int	gpio_reset;
+	u32	flags;
+};
+
+#if defined(CONFIG_SMSC911X) || \
+	defined(CONFIG_SMSC911X_MODULE)
+
+extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
+
+#else
+
+static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 87f6bf2ea4fa..36a0befd6168 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -18,6 +18,8 @@
  * 02110-1301 USA
  *
  */
+#ifndef __ASM__ARCH_OMAP_I2C_H
+#define __ASM__ARCH_OMAP_I2C_H
 
 #include <linux/i2c.h>
 
@@ -36,3 +38,5 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 
 void __init omap1_i2c_mux_pins(int bus_id);
 void __init omap2_i2c_mux_pins(int bus_id);
+
+#endif /* __ASM__ARCH_OMAP_I2C_H */
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index c01d9f08a198..65e20a686713 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -345,6 +345,8 @@
 #define INT_34XX_MMC3_IRQ	94
 #define INT_34XX_GPT12_IRQ	95
 
+#define INT_36XX_UART4_IRQ	80
+
 #define INT_35XX_HECC0_IRQ		24
 #define INT_35XX_HECC1_IRQ		28
 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ	67
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index b4ff6a11a8f2..b87d83ccd545 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -30,6 +30,13 @@
 #include <mach/hardware.h>
 #include <plat/clock.h>
 
+/* macro for building platform_device for McBSP ports */
+#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr)		\
+static struct platform_device omap_mcbsp##port_nr = {	\
+	.name	= "omap-mcbsp-dai",			\
+	.id	= OMAP_MCBSP##port_nr,			\
+}
+
 #define OMAP7XX_MCBSP1_BASE	0xfffb1000
 #define OMAP7XX_MCBSP2_BASE	0xfffb1800
 
@@ -312,6 +319,18 @@
 #define RFSREN			0x0002
 #define RSYNCERREN		0x0001
 
+/* CLKR signal muxing options */
+#define CLKR_SRC_CLKR		0
+#define CLKR_SRC_CLKX		1
+
+/* FSR signal muxing options */
+#define FSR_SRC_FSR		0
+#define FSR_SRC_FSX		1
+
+/* McBSP functional clock sources */
+#define MCBSP_CLKS_PRCM_SRC	0
+#define MCBSP_CLKS_PAD_SRC	1
+
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
 	u16 spcr2;
@@ -398,6 +417,7 @@ struct omap_mcbsp_spi_cfg {
 struct omap_mcbsp_ops {
 	void (*request)(unsigned int);
 	void (*free)(unsigned int);
+	int (*set_clks_src)(u8, u8);
 };
 
 struct omap_mcbsp_platform_data {
@@ -464,6 +484,9 @@ struct omap_mcbsp {
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count, omap_mcbsp_cache_size;
 
+#define omap_mcbsp_check_valid_id(id)	(id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id)		mcbsp_ptr[id];
+
 int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 					int size);
@@ -502,6 +525,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
 int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
 
 
+/* McBSP functional clock source changing function */
+extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id);
 /* SPI specific API */
 void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
 
@@ -510,6 +535,10 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf);
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
 int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
 
+/* McBSP signal muxing API */
+void omap2_mcbsp1_mux_clkr_src(u8 mux);
+void omap2_mcbsp1_mux_fsr_src(u8 mux);
+
 #ifdef CONFIG_ARCH_OMAP3
 /* Sidetone specific API */
 int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 9b89ec601ee2..f57f36abb07e 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -71,12 +71,17 @@ struct omap_mmc_platform_data {
 
 	u64 dma_mask;
 
+	/* Register offset deviation */
+	u16 reg_offset;
+
 	struct omap_mmc_slot_data {
 
-		/* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
-		 * 8 wire signaling is also optional, and is used with HSMMC
+		/*
+		 * 4/8 wires and any additional host capabilities
+		 * need to OR'd all capabilities (ref. linux/mmc/host.h)
 		 */
-		u8 wires;
+		u8  wires;	/* Used for the MMC driver on omap1 and 2420 */
+		u32 caps;	/* Used for the MMC driver on 2430 and later */
 
 		/*
 		 * nomux means "standard" muxing is wrong on this board, and
@@ -104,6 +109,7 @@ struct omap_mmc_platform_data {
 
 		/* we can put the features above into this variable */
 #define HSMMC_HAS_PBIAS		(1 << 0)
+#define HSMMC_HAS_UPDATED_RESET	(1 << 1)
 		unsigned features;
 
 		int switch_pin;			/* gpio (card detect) */
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
new file mode 100644
index 000000000000..c8dae02f0704
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -0,0 +1,128 @@
+/*
+ * Driver for OMAP-UART controller.
+ * Based on drivers/serial/8250.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * Authors:
+ *	Govindraj R	<govindraj.raja@ti.com>
+ *	Thara Gopinath	<thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __OMAP_SERIAL_H__
+#define __OMAP_SERIAL_H__
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <plat/mux.h>
+
+#define DRIVER_NAME	"omap-hsuart"
+
+/*
+ * Use tty device name as ttyO, [O -> OMAP]
+ * in bootargs we specify as console=ttyO0 if uart1
+ * is used as console uart.
+ */
+#define OMAP_SERIAL_NAME	"ttyO"
+
+#define OMAP_MDR1_DISABLE	0x07
+#define OMAP_MDR1_MODE13X	0x03
+#define OMAP_MDR1_MODE16X	0x00
+#define OMAP_MODE13X_SPEED	230400
+
+/*
+ * LCR = 0XBF: Switch to Configuration Mode B.
+ * In configuration mode b allow access
+ * to EFR,DLL,DLH.
+ * Reference OMAP TRM Chapter 17
+ * Section: 1.4.3 Mode Selection
+ */
+#define OMAP_UART_LCR_CONF_MDB	0XBF
+
+/* WER = 0x7F
+ * Enable module level wakeup in WER reg
+ */
+#define OMAP_UART_WER_MOD_WKUP	0X7F
+
+/* Enable XON/XOFF flow control on output */
+#define OMAP_UART_SW_TX		0x04
+
+/* Enable XON/XOFF flow control on input */
+#define OMAP_UART_SW_RX		0x04
+
+#define OMAP_UART_SYSC_RESET	0X07
+#define OMAP_UART_TCR_TRIG	0X0F
+#define OMAP_UART_SW_CLR	0XF0
+#define OMAP_UART_FIFO_CLR	0X06
+
+#define OMAP_UART_DMA_CH_FREE	-1
+
+#define RX_TIMEOUT		(3 * HZ)
+#define OMAP_MAX_HSUART_PORTS	4
+
+#define MSR_SAVE_FLAGS		UART_MSR_ANY_DELTA
+
+struct omap_uart_port_info {
+	bool			dma_enabled;	/* To specify DMA Mode */
+	unsigned int		uartclk;	/* UART clock rate */
+	void __iomem		*membase;	/* ioremap cookie or NULL */
+	resource_size_t		mapbase;	/* resource base */
+	unsigned long		irqflags;	/* request_irq flags */
+	upf_t			flags;		/* UPF_* flags */
+};
+
+struct uart_omap_dma {
+	u8			uart_dma_tx;
+	u8			uart_dma_rx;
+	int			rx_dma_channel;
+	int			tx_dma_channel;
+	dma_addr_t		rx_buf_dma_phys;
+	dma_addr_t		tx_buf_dma_phys;
+	unsigned int		uart_base;
+	/*
+	 * Buffer for rx dma.It is not required for tx because the buffer
+	 * comes from port structure.
+	 */
+	unsigned char		*rx_buf;
+	unsigned int		prev_rx_dma_pos;
+	int			tx_buf_size;
+	int			tx_dma_used;
+	int			rx_dma_used;
+	spinlock_t		tx_lock;
+	spinlock_t		rx_lock;
+	/* timer to poll activity on rx dma */
+	struct timer_list	rx_timer;
+	int			rx_buf_size;
+	int			rx_timeout;
+};
+
+struct uart_omap_port {
+	struct uart_port	port;
+	struct uart_omap_dma	uart_dma;
+	struct platform_device	*pdev;
+
+	unsigned char		ier;
+	unsigned char		lcr;
+	unsigned char		mcr;
+	unsigned char		fcr;
+	unsigned char		efr;
+
+	int			use_dma;
+	/*
+	 * Some bits in registers are cleared on a read, so they must
+	 * be saved whenever the register is read but the bits will not
+	 * be immediately processed.
+	 */
+	unsigned int		lsr_break_flag;
+	unsigned char		msr_saved_flags;
+	char			name[20];
+	unsigned long		port_activity;
+};
+
+#endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
index 7055672a8c68..92df9e27cc5c 100644
--- a/arch/arm/plat-omap/include/plat/omap24xx.h
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
@@ -40,7 +40,7 @@
 #define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
 #define OMAP24XX_IVA_INTC_BASE	0x40000000
 
-#define OMAP2420_CTRL_BASE	L4_24XX_BASE
+#define OMAP242X_CTRL_BASE	L4_24XX_BASE
 #define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
 #define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
 #define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
new file mode 100644
index 000000000000..2b1d9bc1eebb
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -0,0 +1,14 @@
+#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+struct omap4_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+
+	u8 rows;
+	u8 cols;
+};
+
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *);
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 25cd9ac3b095..28e2d1a78433 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -36,6 +36,8 @@
 
 #include <plat/omap_hwmod.h>
 
+extern struct device omap_device_parent;
+
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0
 #define OMAP_DEVICE_STATE_ENABLED	1
@@ -62,7 +64,6 @@
  *
  */
 struct omap_device {
-	u32                             magic;
 	struct platform_device		pdev;
 	struct omap_hwmod		**hwmods;
 	struct omap_device_pm_latency	*pm_lats;
@@ -82,7 +83,6 @@ int omap_device_shutdown(struct platform_device *pdev);
 
 /* Core code interface */
 
-bool omap_device_is_valid(struct omap_device *od);
 int omap_device_count_resources(struct omap_device *od);
 int omap_device_fill_resources(struct omap_device *od, struct resource *res);
 
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index a4e508dfaba2..7eaa8edf3b14 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -14,19 +14,16 @@
  *
  * These headers and macros are used to define OMAP on-chip module
  * data and their integration with other OMAP modules and Linux.
- *
- * References:
- * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
- * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
- * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
- * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
- * - Open Core Protocol Specification 2.2
+ * Copious documentation and references can also be found in the
+ * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
+ * writing).
  *
  * To do:
  * - add interconnect error log structures
  * - add pinmuxing
  * - init_conn_id_bit (CONNID_BIT_VECTOR)
  * - implement default hwmod SMS/SDRC flags?
+ * - remove unused fields
  *
  */
 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
@@ -35,6 +32,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/mutex.h>
 #include <plat/cpu.h>
 
 struct omap_device;
@@ -96,7 +94,7 @@ struct omap_hwmod_irq_info {
 /**
  * struct omap_hwmod_dma_info - DMA channels used by the hwmod
  * @name: name of the DMA channel (module local name)
- * @dma_ch: DMA channel ID
+ * @dma_req: DMA request ID
  *
  * @name should be something short, e.g., "tx" or "rx".  It is for use
  * by platform_get_resource_byname().  It is defined locally to the
@@ -104,7 +102,20 @@ struct omap_hwmod_irq_info {
  */
 struct omap_hwmod_dma_info {
 	const char	*name;
-	u16		dma_ch;
+	u16		dma_req;
+};
+
+/**
+ * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
+ * @name: name of the reset line (module local name)
+ * @rst_shift: Offset of the reset bit
+ *
+ * @name should be something short, e.g., "cpu0" or "rst". It is defined
+ * locally to the hwmod.
+ */
+struct omap_hwmod_rst_info {
+	const char	*name;
+	u8		rst_shift;
 };
 
 /**
@@ -237,8 +248,9 @@ struct omap_hwmod_ocp_if {
 #define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
 #define SYSC_HAS_SIDLEMODE	(1 << 5)
 #define SYSC_HAS_MIDLEMODE	(1 << 6)
-#define SYSS_MISSING		(1 << 7)
+#define SYSS_HAS_RESET_STATUS	(1 << 7)
 #define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
+#define SYSC_HAS_RESET_STATUS	(1 << 9)
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH	0x0
@@ -327,10 +339,12 @@ struct omap_hwmod_omap2_prcm {
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
+ * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
 	void __iomem	*clkctrl_reg;
+	void __iomem	*rstctrl_reg;
 	u8		submodule_wkdep_bit;
 };
 
@@ -352,6 +366,11 @@ struct omap_hwmod_omap4_prcm {
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
  * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
  *     only for few initiator modules on OMAP2 & 3.
+ * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
+ *     This is needed for devices like DSS that require optional clocks enabled
+ *     in order to complete the reset. Optional clocks will be disabled
+ *     again after the reset.
+ * HWMOD_16BIT_REG: Module has 16bit registers
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -360,6 +379,8 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
 #define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
 #define HWMOD_NO_IDLEST				(1 << 6)
+#define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
+#define HWMOD_16BIT_REG				(1 << 8)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -410,7 +431,7 @@ struct omap_hwmod_class {
  * @class: struct omap_hwmod_class * to the class of this hwmod
  * @od: struct omap_device currently associated with this hwmod (internal use)
  * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
- * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
+ * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt)
  * @prcm: PRCM data pertaining to this hwmod
  * @main_clk: main clock: OMAP clock name
  * @_clk: pointer to the main struct clk (filled in at runtime)
@@ -424,7 +445,7 @@ struct omap_hwmod_class {
  * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
  * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
  * @mpu_irqs_cnt: number of @mpu_irqs
- * @sdma_chs_cnt: number of @sdma_chs
+ * @sdma_reqs_cnt: number of @sdma_reqs
  * @opt_clks_cnt: number of @opt_clks
  * @master_cnt: number of @master entries
  * @slaves_cnt: number of @slave entries
@@ -433,6 +454,7 @@ struct omap_hwmod_class {
  * @_state: internal-use hwmod state
  * @flags: hwmod flags (documented below)
  * @omap_chip: OMAP chips this hwmod is present on
+ * @_mutex: mutex serializing operations on this hwmod
  * @node: list node for hwmod list (internal use)
  *
  * @main_clk refers to this module's "main clock," which for our
@@ -448,7 +470,8 @@ struct omap_hwmod {
 	struct omap_hwmod_class		*class;
 	struct omap_device		*od;
 	struct omap_hwmod_irq_info	*mpu_irqs;
-	struct omap_hwmod_dma_info	*sdma_chs;
+	struct omap_hwmod_dma_info	*sdma_reqs;
+	struct omap_hwmod_rst_info	*rst_lines;
 	union {
 		struct omap_hwmod_omap2_prcm omap2;
 		struct omap_hwmod_omap4_prcm omap4;
@@ -461,6 +484,7 @@ struct omap_hwmod {
 	void				*dev_attr;
 	u32				_sysc_cache;
 	void __iomem			*_mpu_rt_va;
+	struct mutex			_mutex;
 	struct list_head		node;
 	u16				flags;
 	u8				_mpu_port_index;
@@ -468,7 +492,8 @@ struct omap_hwmod {
 	u8				msuspendmux_shift;
 	u8				response_lat;
 	u8				mpu_irqs_cnt;
-	u8				sdma_chs_cnt;
+	u8				sdma_reqs_cnt;
+	u8				rst_lines_cnt;
 	u8				opt_clks_cnt;
 	u8				masters_cnt;
 	u8				slaves_cnt;
@@ -492,6 +517,10 @@ int omap_hwmod_idle(struct omap_hwmod *oh);
 int _omap_hwmod_idle(struct omap_hwmod *oh);
 int omap_hwmod_shutdown(struct omap_hwmod *oh);
 
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
+
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
 
@@ -500,8 +529,8 @@ int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
 int omap_hwmod_reset(struct omap_hwmod *oh);
 void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
 
-void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
-u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
+void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
 
 int omap_hwmod_count_resources(struct omap_hwmod *oh);
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
@@ -534,5 +563,6 @@ int omap_hwmod_for_each_by_class(const char *classname,
 extern int omap2420_hwmod_init(void);
 extern int omap2430_hwmod_init(void);
 extern int omap3xxx_hwmod_init(void);
+extern int omap44xx_hwmod_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index fb6ec74fe39e..9ca420dcd2f8 100644
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -32,6 +32,7 @@
 
 /* Powerdomain allowable state bitfields */
 #define PWRSTS_ON		(1 << PWRDM_POWER_ON)
+#define PWRSTS_OFF		(1 << PWRDM_POWER_OFF)
 #define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_ON))
 
@@ -161,5 +162,6 @@ int pwrdm_state_switch(struct powerdomain *pwrdm);
 int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
 int pwrdm_pre_transition(void);
 int pwrdm_post_transition(void);
+int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index 9fbd91419cd1..ab77442e42ab 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -38,6 +38,8 @@ u32 prm_read_mod_reg(s16 module, u16 idx);
 void prm_write_mod_reg(u32 val, s16 module, u16 idx);
 u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
 u32 cm_read_mod_reg(s16 module, u16 idx);
 void cm_write_mod_reg(u32 val, s16 module, u16 idx);
 u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 7b76f50564ba..efd87c8dda69 100644
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -147,6 +147,7 @@ struct memory_timings {
 };
 
 extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
 
 u32 omap2xxx_sdrc_dll_is_unlocked(void);
 u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 16a1b458d53c..5905100b29a1 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -11,7 +11,6 @@
 #ifndef __ARCH_ARM_OMAP_SRAM_H
 #define __ARCH_ARM_OMAP_SRAM_H
 
-extern int __init omap_sram_init(void);
 extern void * omap_sram_push(void * start, unsigned long size);
 extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
 
diff --git a/arch/arm/plat-omap/include/plat/timer-gp.h b/arch/arm/plat-omap/include/plat/timer-gp.h
deleted file mode 100644
index c88d346b59d9..000000000000
--- a/arch/arm/plat-omap/include/plat/timer-gp.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * OMAP2/3 GPTIMER support.headers
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
-
-int __init omap2_gp_clockevent_set_gptimer(u8 id);
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index ddf723be48dc..9036e374e0ac 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -139,10 +139,14 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_OMAP2(1, omap3evm);
 		DEBUG_LL_OMAP3(1, omap_3430sdp);
 		DEBUG_LL_OMAP3(1, omap_3630sdp);
+		DEBUG_LL_OMAP3(1, omap3530_lv_som);
+		DEBUG_LL_OMAP3(1, omap3_torpedo);
 
 		/* omap3 based boards using UART3 */
 		DEBUG_LL_OMAP3(3, cm_t35);
+		DEBUG_LL_OMAP3(3, cm_t3517);
 		DEBUG_LL_OMAP3(3, igep0020);
+		DEBUG_LL_OMAP3(3, igep0030);
 		DEBUG_LL_OMAP3(3, nokia_rx51);
 		DEBUG_LL_OMAP3(3, omap3517evm);
 		DEBUG_LL_OMAP3(3, omap3_beagle);
@@ -153,6 +157,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 
 		/* omap4 based boards using UART3 */
 		DEBUG_LL_OMAP4(3, omap_4430sdp);
+		DEBUG_LL_OMAP4(3, omap4_panda);
 
 		/* zoom2/3 external uart */
 		DEBUG_LL_ZOOM(omap_zoom2);
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 2a9427c8cc48..59c7fe731f28 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -105,7 +105,7 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
 #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
 void omap2_usbfs_init(struct omap_usb_config *pdata);
 #else
-static inline omap2_usbfs_init(struct omap_usb_config *pdata)
+static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
 {
 }
 #endif
@@ -218,6 +218,27 @@ static inline omap2_usbfs_init(struct omap_usb_config *pdata)
 #	define	USBT2TLL5PI		(1 << 17)
 #	define	USB0PUENACTLOI		(1 << 16)
 #	define	USBSTANDBYCTRL		(1 << 15)
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE	(1 << 23)
+#define CONF2_OTGMODE		(3 << 14)
+#define CONF2_NO_OVERRIDE	(0 << 14)
+#define CONF2_FORCE_HOST	(1 << 14)
+#define CONF2_FORCE_DEVICE	(2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN		(1 << 13)
+#define CONF2_VBDTCTEN		(1 << 12)
+#define CONF2_REFFREQ_24MHZ	(2 << 8)
+#define CONF2_REFFREQ_26MHZ	(7 << 8)
+#define CONF2_REFFREQ_13MHZ	(6 << 8)
+#define CONF2_REFFREQ		(0xf << 8)
+#define CONF2_PHYCLKGD		(1 << 7)
+#define CONF2_VBUSSENSE		(1 << 6)
+#define CONF2_PHY_PLLON		(1 << 5)
+#define CONF2_RESET		(1 << 4)
+#define CONF2_PHYPWRDN		(1 << 3)
+#define CONF2_OTGPWRDN		(1 << 2)
+#define CONF2_DATPOL		(1 << 1)
 
 #if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
 u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h
index d8a03ced3b10..3792bdea2f6d 100644
--- a/arch/arm/plat-omap/include/plat/vrfb.h
+++ b/arch/arm/plat-omap/include/plat/vrfb.h
@@ -35,6 +35,7 @@ struct vrfb {
 	bool yuv_mode;
 };
 
+#ifdef CONFIG_OMAP2_VRFB
 extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
 extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
 extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
@@ -47,4 +48,19 @@ extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
 extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
 extern void omap_vrfb_restore_context(void);
 
+#else
+static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
+static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
+static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
+		u8 bytespp) {}
+static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp)
+		{ return 0; }
+static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp)
+		{ return 0; }
+static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+		u16 width, u16 height, unsigned bytespp, bool yuv_mode) {}
+static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot)
+		{ return 0; }
+static inline void omap_vrfb_restore_context(void) {}
+#endif
 #endif /* __VRFB_H */