Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Here are the main updates for SoC support (besides DT additions) for
  ARM 32- and 64-bit platforms. The branch also contains defconfig
  updates to turn on drivers and options as needed on the various
  platforms.

  The largest parts of the delta are from cleanups moving platform data
  and board file setup of TI platforms to ti-sysc bus drivers. There are
  also some sweeping changes of eeprom and nand setup on Davinci, i.MX
  and other platforms.

  Samsung is removing support for Exynos5440, which was an oddball SoC
  that hasn't been seen much use in designs.

  Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).

  Linus Walleij is also removing support for ux500 (Sony Ericsson)
  U8540/9540 SoCs that never made it to significant mass production and
  products"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  MAINTAINERS: add NXP linux team maillist as i.MX reviewer
  ARM: stm32: Don't select DMA unconditionally on STM32MP157C
  arm64: defconfig: Enable PCIe on msm8996 and db820c
  ARM: pxa3xx: enable external wakeup pins
  ARM: pxa: stargate2: use device properties for at24 eeprom
  arm64: defconfig: Enable HISILICON_LPC
  arm64: defconfig: enable drivers for Poplar support
  arm64: defconfig: Enable UFS on msm8996
  ARM: berlin: switch to SPDX license identifier
  arm: berlin: remove non-necessary flush_cache_all()
  ARM: berlin: extend BG2CD Kconfig entry
  OMAP: CLK: CLKSRC: Add suspend resume hooks
  ARM: AM43XX: Add functions to save/restore am43xx control registers
  ASoC: ams_delta: use GPIO lookup table
  ARM: OMAP1: ams-delta: add GPIO lookup tables
  bus: ti-sysc: Fix optional clocks array access
  ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
  ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
  ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
  ...

1 files changed, 26 insertions, 4 deletions

diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c
index d9586ba2e63c..c6ed14840c3c 100644
--- a/arch/arm/mm/cache-b15-rac.c
+++ b/arch/arm/mm/cache-b15-rac.c
@@ -33,7 +33,10 @@ extern void v7_flush_kern_cache_all(void);
 #define  RAC_CPU_SHIFT			(8)
 #define  RACCFG_MASK			(0xff)
 #define RAC_CONFIG1_REG			(0x7c)
-#define RAC_FLUSH_REG			(0x80)
+/* Brahma-B15 is a quad-core only design */
+#define B15_RAC_FLUSH_REG		(0x80)
+/* Brahma-B53 is an octo-core design */
+#define B53_RAC_FLUSH_REG		(0x84)
 #define  FLUSH_RAC			(1 << 0)
 
 /* Bitmask to enable instruction and data prefetching with a 256-bytes stride */
@@ -52,6 +55,7 @@ static void __iomem *b15_rac_base;
 static DEFINE_SPINLOCK(rac_lock);
 
 static u32 rac_config0_reg;
+static u32 rac_flush_offset;
 
 /* Initialization flag to avoid checking for b15_rac_base, and to prevent
  * multi-platform kernels from crashing here as well.
@@ -70,14 +74,14 @@ static inline void __b15_rac_flush(void)
 {
 	u32 reg;
 
-	__raw_writel(FLUSH_RAC, b15_rac_base + RAC_FLUSH_REG);
+	__raw_writel(FLUSH_RAC, b15_rac_base + rac_flush_offset);
 	do {
 		/* This dmb() is required to force the Bus Interface Unit
 		 * to clean oustanding writes, and forces an idle cycle
 		 * to be inserted.
 		 */
 		dmb();
-		reg = __raw_readl(b15_rac_base + RAC_FLUSH_REG);
+		reg = __raw_readl(b15_rac_base + rac_flush_offset);
 	} while (reg & FLUSH_RAC);
 }
 
@@ -287,7 +291,7 @@ static struct syscore_ops b15_rac_syscore_ops = {
 
 static int __init b15_rac_init(void)
 {
-	struct device_node *dn;
+	struct device_node *dn, *cpu_dn;
 	int ret = 0, cpu;
 	u32 reg, en_mask = 0;
 
@@ -305,6 +309,24 @@ static int __init b15_rac_init(void)
 		goto out;
 	}
 
+	cpu_dn = of_get_cpu_node(0, NULL);
+	if (!cpu_dn) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15"))
+		rac_flush_offset = B15_RAC_FLUSH_REG;
+	else if (of_device_is_compatible(cpu_dn, "brcm,brahma-b53"))
+		rac_flush_offset = B53_RAC_FLUSH_REG;
+	else {
+		pr_err("Unsupported CPU\n");
+		of_node_put(cpu_dn);
+		ret = -EINVAL;
+		goto out;
+	}
+	of_node_put(cpu_dn);
+
 	ret = register_reboot_notifier(&b15_rac_reboot_nb);
 	if (ret) {
 		pr_err("failed to register reboot notifier\n");