Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 272 insertions, 0 deletions

diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
new file mode 100644
index 000000000000..360cae905692
--- /dev/null
+++ b/arch/arm/mm/proc-sa110.S
@@ -0,0 +1,272 @@
+/*
+ *  linux/arch/arm/mm/proc-sa110.S
+ *
+ *  Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  MMU functions for SA110
+ *
+ *  These are the low level assembler for performing cache and TLB
+ *  functions on the StrongARM-110.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/ptrace.h>
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define DCACHELINESIZE	32
+#define FLUSH_OFFSET	32768
+
+	.macro flush_110_dcache	rd, ra, re
+	ldr	\rd, =flush_base
+	ldr	\ra, [\rd]
+	eor	\ra, \ra, #FLUSH_OFFSET
+	str	\ra, [\rd]
+	add	\re, \ra, #16384		@ only necessary for 16k
+1001:	ldr	\rd, [\ra], #DCACHELINESIZE
+	teq	\re, \ra
+	bne	1001b
+	.endm
+
+	.data
+flush_base:
+	.long	FLUSH_BASE
+	.text
+
+/*
+ * cpu_sa110_proc_init()
+ */
+ENTRY(cpu_sa110_proc_init)
+	mov	r0, #0
+	mcr	p15, 0, r0, c15, c1, 2		@ Enable clock switching
+	mov	pc, lr
+
+/*
+ * cpu_sa110_proc_fin()
+ */
+ENTRY(cpu_sa110_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	bl	v4wb_flush_kern_cache_all	@ clean caches
+1:	mov	r0, #0
+	mcr	p15, 0, r0, c15, c2, 2		@ Disable clock switching
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000			@ ...i............
+	bic	r0, r0, #0x000e			@ ............wca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_sa110_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+	.align	5
+ENTRY(cpu_sa110_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x000f			@ ............wcam
+	bic	ip, ip, #0x1100			@ ...i...s........
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	mov	pc, r0
+
+/*
+ * cpu_sa110_do_idle(type)
+ *
+ * Cause the processor to idle
+ *
+ * type: call type:
+ *   0 = slow idle
+ *   1 = fast idle
+ *   2 = switch to slow processor clock
+ *   3 = switch to fast processor clock
+ */
+	.align	5
+
+ENTRY(cpu_sa110_do_idle)
+	mcr	p15, 0, ip, c15, c2, 2		@ disable clock switching
+	ldr	r1, =UNCACHEABLE_ADDR		@ load from uncacheable loc
+	ldr	r1, [r1, #0]			@ force switch to MCLK
+	mov	r0, r0				@ safety
+	mov	r0, r0				@ safety
+	mov	r0, r0				@ safety
+	mcr	p15, 0, r0, c15, c8, 2		@ Wait for interrupt, cache aligned
+	mov	r0, r0				@ safety
+	mov	r0, r0				@ safety
+	mov	r0, r0				@ safety
+	mcr	p15, 0, r0, c15, c1, 2		@ enable clock switching
+	mov	pc, lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ * cpu_sa110_dcache_clean_area(addr,sz)
+ *
+ * Clean the specified entry of any caches such that the MMU
+ * translation fetches will obtain correct data.
+ *
+ * addr: cache-unaligned virtual address
+ */
+	.align	5
+ENTRY(cpu_sa110_dcache_clean_area)
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #DCACHELINESIZE
+	subs	r1, r1, #DCACHELINESIZE
+	bhi	1b
+	mov	pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_sa110_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	5
+ENTRY(cpu_sa110_switch_mm)
+	flush_110_dcache	r3, ip, r1
+	mov	r1, #0
+	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
+	mov	pc, lr
+
+/*
+ * cpu_sa110_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+	.align	5
+ENTRY(cpu_sa110_set_pte)
+	str	r1, [r0], #-2048		@ linux version
+
+	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+	bic	r2, r1, #PTE_SMALL_AP_MASK
+	bic	r2, r2, #PTE_TYPE_MASK
+	orr	r2, r2, #PTE_TYPE_SMALL
+
+	tst	r1, #L_PTE_USER			@ User?
+	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
+
+	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
+	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
+	movne	r2, #0
+
+	str	r2, [r0]			@ hardware version
+	mov	r0, r0
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+	__INIT
+
+	.type	__sa110_setup, #function
+__sa110_setup:
+	mov	r10, #0
+	mcr	p15, 0, r10, c7, c7		@ invalidate I,D caches on v4
+	mcr	p15, 0, r10, c7, c10, 4		@ drain write buffer on v4
+	mcr	p15, 0, r10, c8, c7		@ invalidate I,D TLBs on v4
+	mrc	p15, 0, r0, c1, c0		@ get control register v4
+	ldr	r5, sa110_cr1_clear
+	bic	r0, r0, r5
+	ldr	r5, sa110_cr1_set
+	orr	r0, r0, r5
+	mov	pc, lr
+	.size	__sa110_setup, . - __sa110_setup
+
+	/*
+	 *  R
+	 * .RVI ZFRS BLDP WCAM
+	 * ..01 0001 ..11 1101
+	 * 
+	 */
+	.type	sa110_cr1_clear, #object
+	.type	sa110_cr1_set, #object
+sa110_cr1_clear:
+	.word	0x3f3f
+sa110_cr1_set:
+	.word	0x113d
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+
+	.type	sa110_processor_functions, #object
+ENTRY(sa110_processor_functions)
+	.word	v4_early_abort
+	.word	cpu_sa110_proc_init
+	.word	cpu_sa110_proc_fin
+	.word	cpu_sa110_reset
+	.word	cpu_sa110_do_idle
+	.word	cpu_sa110_dcache_clean_area
+	.word	cpu_sa110_switch_mm
+	.word	cpu_sa110_set_pte
+	.size	sa110_processor_functions, . - sa110_processor_functions
+
+	.section ".rodata"
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv4"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v4"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_sa110_name, #object
+cpu_sa110_name:
+	.asciz	"StrongARM-110"
+	.size	cpu_sa110_name, . - cpu_sa110_name
+
+	.align
+
+	.section ".proc.info", #alloc, #execinstr
+
+	.type	__sa110_proc_info,#object
+__sa110_proc_info:
+	.long	0x4401a100
+	.long	0xfffffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__sa110_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
+	.long	cpu_sa110_name
+	.long	sa110_processor_functions
+	.long	v4wb_tlb_fns
+	.long	v4wb_user_fns
+	.long	v4wb_cache_fns
+	.size	__sa110_proc_info, . - __sa110_proc_info