Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

  This includes two branches for arm64 dt updates, both following up on
  earlier changes for the same platforms that are already merged:

  Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates

  Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT

  There are also a couple of bugfixes that trickled in since the start
  of the merge window:

   - The moxart_defconfig was not building the intended platform
   - CPU-hotplug was broken on ux500
   - Coresight was broken on Juno (never worked)"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: deconfig: fix the moxart defconfig
  ARM: ux500: resume the second core properly
  arm64: dts: juno: update definition for programmable replicator
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ...

5 files changed, 7 insertions, 60 deletions

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index c2499bff4986..a9a3453548f4 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,7 +5,4 @@
 obj-y				:= pm.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
 obj-$(CONFIG_SMP)		+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
-
-CFLAGS_hotplug.o		+= -march=armv7-a
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 24529cf58df6..28083ef72819 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -31,8 +31,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 
-#include "setup.h"
-
 #include "db8500-regs.h"
 
 static int __init ux500_l2x0_unlock(void)
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
deleted file mode 100644
index 1cbed0331fd3..000000000000
--- a/arch/arm/mach-ux500/hotplug.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *	Based on ARM realview platform
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-
-#include "setup.h"
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void ux500_cpu_die(unsigned int cpu)
-{
-	/* directly enter low power state, skipping secure registers */
-	for (;;) {
-		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
-				: : : "memory");
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-	}
-}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 9b124c22035f..69c2361ca688 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -23,8 +23,6 @@
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
-#include "setup.h"
-
 #include "db8500-regs.h"
 
 /* Magic triggers in backup RAM */
@@ -90,6 +88,13 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+void ux500_cpu_die(unsigned int cpu)
+{
+	wfi();
+}
+#endif
+
 static const struct smp_operations ux500_smp_ops __initconst = {
 	.smp_prepare_cpus	= ux500_smp_prepare_cpus,
 	.smp_boot_secondary	= ux500_boot_secondary,
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
deleted file mode 100644
index 988e7c77068d..000000000000
--- a/arch/arm/mach-ux500/setup.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These symbols are needed for board-specific files to call their
- * own cpu-specific files
- */
-#ifndef __ASM_ARCH_SETUP_H
-#define __ASM_ARCH_SETUP_H
-
-extern void ux500_cpu_die(unsigned int cpu);
-
-#endif /*  __ASM_ARCH_SETUP_H */