ARM: ux500: split out prcmu initialization

This untangles the final bits of the prcmu code from the platform
code:

* The IRQ_PRCMU_* definitions move from irqs-db8500.h into prcmu.c
  because they are only of local significance.
* u8500_thsens_device goes into the prcmu, because it uses a PRCMU
  IRQ that the platform does not see.
* IRQ_DB8500_AB8500 and IRQ_PRCMU_BASE go into the platform data
  because the PRCMU does not see it.

Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Fixed a oneliner bug]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

3 files changed, 2 insertions, 83 deletions

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index b03457881c4b..fe3d72cc341c 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -206,63 +206,6 @@ struct ab8500_platform_data ab8500_platdata = {
 	.codec		= &ab8500_codec_pdata,
 };
 
-/*
- * Thermal Sensor
- */
-
-static struct resource db8500_thsens_resources[] = {
-	{
-		.name = "IRQ_HOTMON_LOW",
-		.start  = IRQ_PRCMU_HOTMON_LOW,
-		.end    = IRQ_PRCMU_HOTMON_LOW,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.name = "IRQ_HOTMON_HIGH",
-		.start  = IRQ_PRCMU_HOTMON_HIGH,
-		.end    = IRQ_PRCMU_HOTMON_HIGH,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct db8500_thsens_platform_data db8500_thsens_data = {
-	.trip_points[0] = {
-		.temp = 70000,
-		.type = THERMAL_TRIP_ACTIVE,
-		.cdev_name = {
-			[0] = "thermal-cpufreq-0",
-		},
-	},
-	.trip_points[1] = {
-		.temp = 75000,
-		.type = THERMAL_TRIP_ACTIVE,
-		.cdev_name = {
-			[0] = "thermal-cpufreq-0",
-		},
-	},
-	.trip_points[2] = {
-		.temp = 80000,
-		.type = THERMAL_TRIP_ACTIVE,
-		.cdev_name = {
-			[0] = "thermal-cpufreq-0",
-		},
-	},
-	.trip_points[3] = {
-		.temp = 85000,
-		.type = THERMAL_TRIP_CRITICAL,
-	},
-	.num_trips = 4,
-};
-
-static struct platform_device u8500_thsens_device = {
-	.name           = "db8500-thermal",
-	.resource       = db8500_thsens_resources,
-	.num_resources  = ARRAY_SIZE(db8500_thsens_resources),
-	.dev	= {
-		.platform_data	= &db8500_thsens_data,
-	},
-};
-
 static struct platform_device u8500_cpufreq_cooling_device = {
 	.name           = "db8500-cpufreq-cooling",
 };
@@ -622,7 +565,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&snowball_key_dev,
 	&snowball_sbnet_dev,
 	&snowball_gpio_en_3v3_regulator_dev,
-	&u8500_thsens_device,
 	&u8500_cpufreq_cooling_device,
 };
 
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index f3d9419f75d3..df4d7de0fd9f 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -199,6 +199,8 @@ struct platform_device u8500_ske_keypad_device = {
 
 struct prcmu_pdata db8500_prcmu_pdata = {
 	.ab_platdata	= &ab8500_platdata,
+	.ab_irq		= IRQ_DB8500_AB8500,
+	.irq_base	= IRQ_PRCMU_BASE,
 	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
 	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
 };
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
index 68bc14974608..f3a9d5947ef3 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
@@ -109,31 +109,6 @@
 
 /* Virtual interrupts corresponding to the PRCMU wakeups.  */
 #define IRQ_PRCMU_BASE IRQ_SOC_START
-#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE)
-
-#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE)
-#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1)
-#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2)
-#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3)
-#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4)
-#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5)
-#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6)
-#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7)
-#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8)
-#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9)
-#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10)
-#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11)
-#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12)
-#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13)
-#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14)
-#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15)
-#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16)
-#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17)
-#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18)
-#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19)
-#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20)
-#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21)
-#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22)
 #define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23)
 
 /*