ARM: u300: add syscon node

This adds a device tree node for the U300 system controller
and remaps this dynamically instead of using hard-coded
virtual addresses. The board power set-up code is altered
to fetch a reference to the syscon using ampersand <&syscon>
notation. This way of passing a pointer to the syscon will
also be used by the clocks.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2 files changed, 36 insertions, 7 deletions

diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 1fdaf81771fa..8cfca45d3650 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -14,6 +14,7 @@
 #include <linux/platform_data/clk-u300.h>
 #include <linux/platform_data/pinctrl-coh901.h>
 #include <linux/irqchip.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/clocksource.h>
 #include <linux/clk.h>
@@ -48,6 +49,8 @@
 #define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK			(0x01FC)
 #define U300_SYSCON_BCR_APP_BOOT_SERV_MASK			(0x0003)
 
+static void __iomem *syscon_base;
+
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
  * only things we need are the areas where we find the timer, syscon and
@@ -171,7 +174,7 @@ static void __init u300_init_check_chip(void)
 	const char unknown[] = "UNKNOWN";
 
 	/* Read out and print chip ID */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+	val = readw(syscon_base + U300_SYSCON_CIDR);
 	/* This is in funky bigendian order... */
 	val = (val & 0xFFU) << 8 | (val >> 8);
 	chip = db_chips;
@@ -244,10 +247,21 @@ static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = {
 
 static void __init u300_init_irq_dt(void)
 {
+	struct device_node *syscon;
 	struct clk *clk;
 
+	syscon = of_find_node_by_path("/syscon@c0011000");
+	if (!syscon) {
+		pr_crit("could not find syscon node\n");
+		return;
+	}
+	syscon_base = of_iomap(syscon, 0);
+	if (!syscon_base) {
+		pr_crit("could not remap syscon\n");
+		return;
+	}
 	/* initialize clocking early, we want to clock the INTCON */
-	u300_clk_init(U300_SYSCON_VBASE);
+	u300_clk_init(syscon_base);
 
 	/* Bootstrap EMIF and SEMI clocks */
 	clk = clk_get_sys("pl172", NULL);
@@ -280,9 +294,9 @@ static void __init u300_init_machine_dt(void)
 			u300_auxdata_lookup, NULL);
 
 	/* Enable SEMI self refresh */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
+	val = readw(syscon_base + U300_SYSCON_SMCR) |
 		U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
+	writew(val, syscon_base + U300_SYSCON_SMCR);
 }
 
 static const char * u300_board_compat[] = {
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index 1cbe88c74367..273fceb83685 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -16,8 +16,8 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
 /* Those are just for writing in syscon */
+#include <linux/of_address.h>
 #include <linux/io.h>
-#include "u300-regs.h"
 
 /* Power Management Control 16bit (R/W) */
 #define U300_SYSCON_PMCR					(0x50)
@@ -57,10 +57,25 @@ void u300_pm_poweroff(void)
  */
 static int __init __u300_init_boardpower(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *syscon_np;
+	static void __iomem *syscon_base;
 	int err;
 	u32 val;
 
 	pr_info("U300: setting up board power\n");
+
+	syscon_np = of_parse_phandle(np, "syscon", 0);
+	if (!syscon_np) {
+		pr_crit("U300: no syscon node\n");
+		return -ENODEV;
+	}
+	syscon_base = of_iomap(syscon_np, 0);
+	if (!syscon_base) {
+		pr_crit("U300: could not remap syscon\n");
+		return -ENODEV;
+	}
+
 	main_power_15 = regulator_get(&pdev->dev, "vana15");
 
 	if (IS_ERR(main_power_15)) {
@@ -81,9 +96,9 @@ static int __init __u300_init_boardpower(struct platform_device *pdev)
 	 * the rest of the U300 power management is implemented.
 	 */
 	pr_info("U300: disable system controller pull-up\n");
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+	val = readw(syscon_base + U300_SYSCON_PMCR);
 	val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+	writew(val, syscon_base + U300_SYSCON_PMCR);
 
 	/* Register globally exported PM poweroff hook */
 	pm_power_off = u300_pm_poweroff;