Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
  arm: remove machine_desc.io_pg_offst and .phys_io
  arm: use addruart macro to establish debug mappings
  arm: return both physical and virtual addresses from addruart
  arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
  ARM: make struct machine_desc definition coherent with its comment
  eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
  cpuimx27: fix compile when ULPI is selected
  mach-pcm037_eet: fix compile errors
  Fixing ethernet driver compilation error for i.MX31 ADS board
  cpuimx51: update board support
  mx5: add cpuimx51sd module and its baseboard
  iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
  imx-esdhc: update devices registration
  mx51: add resources for SD/MMC on i.MX51
  iomux-mx51: fix SD1 and SD2's iomux configuration
  clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
  clock-mx51: factorize clk_set_parent and clk_get_rate
  eukrea_mbimxsd: add support for DVI displays
  cpuimx25 & cpuimx35: fix OTG port registration in host mode
  i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
  ...

1 files changed, 232 insertions, 0 deletions

diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
new file mode 100644
index 000000000000..5b69ec4c8af3
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -0,0 +1,232 @@
+/* linux/arch/arm/mach-s5p64x0/dev-spi.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-clock.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *s5p64x0_spi_src_clks[] = {
+	[S5P64X0_SPI_SRCCLK_PCLK] = "pclk",
+	[S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5p64x0_spi0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_SPI0,
+		.end	= S5P64X0_PA_SPI0 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPI0_TX,
+		.end	= DMACH_SPI0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_SPI0_RX,
+		.end	= DMACH_SPI0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= IRQ_SPI0,
+		.end	= IRQ_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
+	.cfg_gpio	= s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+};
+
+static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
+	.cfg_gpio	= s5p6450_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p64x0_device_spi0 = {
+	.name		= "s3c64xx-spi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_spi0_resource),
+	.resource	= s5p64x0_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource s5p64x0_spi1_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_SPI1,
+		.end	= S5P64X0_PA_SPI1 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPI1_TX,
+		.end	= DMACH_SPI1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_SPI1_RX,
+		.end	= DMACH_SPI1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= IRQ_SPI1,
+		.end	= IRQ_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
+	.cfg_gpio	= s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+};
+
+static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
+	.cfg_gpio	= s5p6450_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+};
+
+struct platform_device s5p64x0_device_spi1 = {
+	.name		= "s3c64xx-spi",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_spi1_resource),
+	.resource	= s5p64x0_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	unsigned int id;
+	struct s3c64xx_spi_info *pd;
+
+	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		if (id == 0x50000)
+			pd = &s5p6450_spi0_pdata;
+		else
+			pd = &s5p6440_spi0_pdata;
+
+		s5p64x0_device_spi0.dev.platform_data = pd;
+		break;
+	case 1:
+		if (id == 0x50000)
+			pd = &s5p6450_spi1_pdata;
+		else
+			pd = &s5p6440_spi1_pdata;
+
+		s5p64x0_device_spi1.dev.platform_data = pd;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = s5p64x0_spi_src_clks[src_clk_nr];
+}