summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c64xx
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-11 16:49:45 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-11 16:49:45 +0900
commitaac59e3efce3dca787b11e34726001603ce3d161 (patch)
tree855d3f967b102877a179e23382be3c2c7fc8d66c /arch/arm/mach-s3c64xx
parent21604cdcdcf9ea8c16b1656f78e2eff097244d66 (diff)
parent005ff5fb077ebf93882bd643932f932a9b402529 (diff)
downloadlinux-aac59e3efce3dca787b11e34726001603ce3d161.tar.bz2
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
Diffstat (limited to 'arch/arm/mach-s3c64xx')
-rw-r--r--arch/arm/mach-s3c64xx/Makefile2
-rw-r--r--arch/arm/mach-s3c64xx/clock.c1007
-rw-r--r--arch/arm/mach-s3c64xx/common.c21
-rw-r--r--arch/arm/mach-s3c64xx/common.h12
-rw-r--r--arch/arm/mach-s3c64xx/dma.c4
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/regs-clock.h132
-rw-r--r--arch/arm/mach-s3c64xx/mach-anw6410.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-hmt.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-mini6410.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-ncp.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-smartq.c11
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6400.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c2
-rw-r--r--arch/arm/mach-s3c64xx/pm.c21
-rw-r--r--arch/arm/mach-s3c64xx/s3c6400.c6
-rw-r--r--arch/arm/mach-s3c64xx/s3c6410.c7
17 files changed, 38 insertions, 1199 deletions
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 31d0c9101272..645a8fe55f8d 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -12,7 +12,7 @@ obj- :=
# Core
-obj-y += common.o clock.o
+obj-y += common.o
# Core support
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
deleted file mode 100644
index c1bcc4a6d3a8..000000000000
--- a/arch/arm/mach-s3c64xx/clock.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pll.h>
-
-#include "regs-sys.h"
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll clk_mpll
-#define clk_fout_epll clk_epll
-
-struct clk clk_h2 = {
- .name = "hclk2",
- .rate = 0,
-};
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S3C64XX_OTHERS);
- if (enable)
- val |= S3C64XX_OTHERS_USBMASK;
- else
- val &= ~S3C64XX_OTHERS_USBMASK;
-
- __raw_writel(val, S3C64XX_OTHERS);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-struct clk clk_xusbxti = {
- .name = "xusbxti",
- .rate = 48000000,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
- struct clk *clk,
- int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_off[] = {
- {
- .name = "nand",
- .parent = &clk_h,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_RTC,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_TSADC,
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIC,
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
- }, {
- .name = "keypad",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
- }, {
- .name = "spi",
- .devname = "s3c6410-spi.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI0,
- }, {
- .name = "spi",
- .devname = "s3c6410-spi.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI1,
- }, {
- .name = "48m",
- .devname = "s3c-sdhci.0",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC0_48,
- }, {
- .name = "48m",
- .devname = "s3c-sdhci.1",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC1_48,
- }, {
- .name = "48m",
- .devname = "s3c-sdhci.2",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
- }, {
- .name = "ac97",
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_AC97,
- }, {
- .name = "cfcon",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_IHOST,
- }, {
- .name = "dma0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA0,
- }, {
- .name = "dma1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA1,
- }, {
- .name = "3dse",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_3DSE,
- }, {
- .name = "hclk_secur",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SECUR,
- }, {
- .name = "sdma1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SDMA1,
- }, {
- .name = "sdma0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SDMA0,
- }, {
- .name = "hclk_jpeg",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_JPEG,
- }, {
- .name = "camif",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_CAMIF,
- }, {
- .name = "hclk_scaler",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SCALER,
- }, {
- .name = "2d",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_2D,
- }, {
- .name = "tv",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_TV,
- }, {
- .name = "post0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_POST0,
- }, {
- .name = "rot",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_ROT,
- }, {
- .name = "hclk_mfc",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_MFC,
- }, {
- .name = "pclk_mfc",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_MFC,
- }, {
- .name = "dac27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_DAC27,
- }, {
- .name = "tv27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_TV27,
- }, {
- .name = "scaler27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SCALER27,
- }, {
- .name = "sclk_scaler",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SCALER,
- }, {
- .name = "post0_27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_POST0_27,
- }, {
- .name = "secur",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SECUR,
- }, {
- .name = "sclk_mfc",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MFC,
- }, {
- .name = "sclk_jpeg",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_JPEG,
- },
-};
-
-static struct clk clk_48m_spi0 = {
- .name = "spi_48m",
- .devname = "s3c6410-spi.0",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
-};
-
-static struct clk clk_48m_spi1 = {
- .name = "spi_48m",
- .devname = "s3c6410-spi.1",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS0,
-};
-
-static struct clk clk_i2s1 = {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk clk_i2s2 = {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
-};
-#endif
-
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_LCD,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_UHOST,
- }, {
- .name = "otg",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_USB,
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_PWM,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART0,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART1,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART2,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART3,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_WDT,
- },
-};
-
-static struct clk clk_hsmmc0 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
-};
-
-static struct clk clk_hsmmc1 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
-};
-
-static struct clk clk_hsmmc2 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
-};
-
-static struct clk clk_fout_apll = {
- .name = "fout_apll",
-};
-
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 },
- .sources = &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 },
- .sources = &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 },
- .sources = &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- u32 clkdiv;
-
- /* divisor mask starts at bit0, so no need to shift */
- clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
- return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
-
- if (parent < rate)
- return parent;
-
- div = (parent / rate) - 1;
- if (div > armclk_mask)
- div = armclk_mask;
-
- return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
- u32 val;
-
- if (rate < parent / (armclk_mask + 1))
- return -EINVAL;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
-
- val = __raw_readl(S3C_CLK_DIV0);
- val &= ~armclk_mask;
- val |= (div - 1);
- __raw_writel(val, S3C_CLK_DIV0);
-
- return 0;
-
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c64xx_clk_arm_get_rate,
- .set_rate = s3c64xx_clk_arm_set_rate,
- .round_rate = s3c64xx_clk_arm_round_rate,
- },
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
- rate /= 2;
-
- return rate;
-}
-
-static struct clk_ops clk_dout_ops = {
- .get_rate = s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .parent = &clk_mout_mpll.clk,
- .ops = &clk_dout_ops,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_27m,
-};
-
-static struct clksrc_sources clkset_spi_mmc = {
- .sources = clkset_spi_mmc_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- &clk_27m,
-};
-
-static struct clksrc_sources clkset_irda = {
- .sources = clkset_irda_list,
- .nr_sources = ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- NULL
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
- &clk_48m,
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_uhost = {
- .sources = clkset_uhost_list,
- .nr_sources = ARRAY_SIZE(clkset_uhost_list),
-};
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-/* clocks that feed other parts of the clock source tree */
-
-static struct clk clk_iis_cd0 = {
- .name = "iis_cdclk0",
-};
-
-static struct clk clk_iis_cd1 = {
- .name = "iis_cdclk1",
-};
-
-static struct clk clk_iisv4_cd = {
- .name = "iis_cdclk_v4",
-};
-
-static struct clk clk_pcm_cd = {
- .name = "pcm_cdclk",
-};
-
-static struct clk *clkset_audio0_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iis_cd0,
- [4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio0 = {
- .sources = clkset_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iis_cd1,
- [4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio1 = {
- .sources = clkset_audio1_list,
- .nr_sources = ARRAY_SIZE(clkset_audio1_list),
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk *clkset_audio2_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iisv4_cd,
- [4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio2 = {
- .sources = clkset_audio2_list,
- .nr_sources = ARRAY_SIZE(clkset_audio2_list),
-};
-#endif
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "usb-bus-host",
- .ctrlbit = S3C_CLKCON_SCLK_UHOST,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 },
- .sources = &clkset_uhost,
- }, {
- .clk = {
- .name = "irda-bus",
- .ctrlbit = S3C_CLKCON_SCLK_IRDA,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 },
- .sources = &clkset_irda,
- }, {
- .clk = {
- .name = "camera",
- .ctrlbit = S3C_CLKCON_SCLK_CAM,
- .enable = s3c64xx_sclk_ctrl,
- .parent = &clk_h2,
- },
- .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 },
- },
-};
-
-/* Where does UCLK0 come from? */
-static struct clksrc_clk clk_sclk_uclk = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = S3C_CLKCON_SCLK_UART,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 },
- .sources = &clkset_uart,
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.0",
- .ctrlbit = S3C_CLKCON_SCLK_MMC0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.1",
- .ctrlbit = S3C_CLKCON_SCLK_MMC1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.2",
- .ctrlbit = S3C_CLKCON_SCLK_MMC2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "spi-bus",
- .devname = "s3c6410-spi.0",
- .ctrlbit = S3C_CLKCON_SCLK_SPI0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "spi-bus",
- .devname = "s3c6410-spi.1",
- .ctrlbit = S3C_CLKCON_SCLK_SPI1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_audio_bus0 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.0",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 },
- .sources = &clkset_audio0,
-};
-
-static struct clksrc_clk clk_audio_bus1 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.1",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 },
- .sources = &clkset_audio1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clksrc_clk clk_audio_bus2 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.2",
- .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 },
- .sources = &clkset_audio2,
-};
-#endif
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uclk,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_audio_bus0,
- &clk_audio_bus1,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_hsmmc0,
- &clk_hsmmc1,
- &clk_hsmmc2,
- &clk_48m_spi0,
- &clk_48m_spi1,
- &clk_i2s0,
- &clk_i2s1,
-};
-
-static struct clk_lookup s3c64xx_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
- CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk),
-#ifdef CONFIG_CPU_S3C6410
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk),
-#endif
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c64xx_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long hclk2;
- unsigned long pclk;
- unsigned long epll;
- unsigned long apll;
- unsigned long mpll;
- unsigned int ptr;
- u32 clkdiv0;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- clkdiv0 = __raw_readl(S3C_CLK_DIV0);
- printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- /* For now assume the mux always selects the crystal */
- clk_ext_xtal_mux.parent = xtal_clk;
-
- epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
- __raw_readl(S3C_EPLL_CON1));
- mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
- apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
- fclk = mpll;
-
- printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
- apll, mpll, epll);
-
- if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
- /* Synchronous mode */
- hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
- else
- /* Asynchronous mode */
- hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-
- hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
- pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
- printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
- hclk2, hclk, pclk);
-
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_apll.rate = apll;
-
- clk_h2.rate = hclk2;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks1[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_iis_cd0,
- &clk_iis_cd1,
- &clk_iisv4_cd,
- &clk_pcm_cd,
- &clk_mout_epll.clk,
- &clk_mout_mpll.clk,
- &clk_dout_mpll,
- &clk_arm,
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_27m,
- &clk_48m,
- &clk_h2,
- &clk_xusbxti,
-};
-
-/**
- * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
- * @xtal: The rate for the clock crystal feeding the PLLs.
- * @armclk_divlimit: Divisor mask for ARMCLK.
- *
- * Register the clocks for the S3C6400 and S3C6410 SoC range, such
- * as ARMCLK as well as the necessary parent clocks.
- *
- * This call does not setup the clocks, which is left to the
- * s3c64xx_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c64xx_register_clocks(unsigned long xtal,
- unsigned armclk_divlimit)
-{
- unsigned int cnt;
-
- armclk_mask = armclk_divlimit;
-
- s3c24xx_register_baseclocks(xtal);
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
- s3c_disable_clocks(clk_cdev[cnt], 1);
-
- s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
- s3c_register_clksrc(clksrc_cdev[cnt], 1);
- clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
-}
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 73d79cf5e141..7d3cb58f1856 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
@@ -38,7 +39,6 @@
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/gpio-cfg.h>
@@ -50,6 +50,19 @@
#include "common.h"
+/* External clock frequency */
+static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+ xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+ xusbxti_f = freq;
+}
+
/* uart registration process */
static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -67,7 +80,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = S3C6400_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
- .init_clocks = s3c6400_init_clocks,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
@@ -75,7 +87,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = S3C6410_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
- .init_clocks = s3c6410_init_clocks,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6410_init,
.name = name_s3c6410,
@@ -213,8 +224,10 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
{
/*
* FIXME: there is no better place to put this at the moment
- * (samsung_wdt_reset_init needs clocks)
+ * (s3c64xx_clk_init needs ioremap and must happen before init_time
+ * samsung_wdt_reset_init needs clocks)
*/
+ s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
samsung_wdt_reset_init(S3C_VA_WATCHDOG);
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index e8f990b37665..bd3bd562011e 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -22,21 +22,21 @@
void s3c64xx_init_irq(u32 vic0, u32 vic1);
void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-void s3c64xx_setup_clocks(void);
-
void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
void s3c64xx_init_late(void);
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+ unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
extern void s3c6400_init_irq(void);
extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
#else
-#define s3c6400_init_clocks NULL
#define s3c6400_map_io NULL
#define s3c6400_init NULL
#endif
@@ -46,10 +46,8 @@ extern void s3c6400_init_clocks(int xtal);
extern int s3c6410_init(void);
extern void s3c6410_init_irq(void);
extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
#else
-#define s3c6410_init_clocks NULL
#define s3c6410_map_io NULL
#define s3c6410_init NULL
#endif
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 759846c28d12..c511dfaae148 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -677,7 +677,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
goto err_map;
}
- clk_enable(dmac->clk);
+ clk_prepare_enable(dmac->clk);
dmac->regs = regs;
dmac->chanbase = chbase;
@@ -711,7 +711,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
return 0;
err_clk:
- clk_disable(dmac->clk);
+ clk_disable_unprepare(dmac->clk);
clk_put(dmac->clk);
err_map:
iounmap(regs);
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 05332b998ec0..4f44aac77092 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -15,145 +15,21 @@
#ifndef __PLAT_REGS_CLOCK_H
#define __PLAT_REGS_CLOCK_H __FILE__
+/*
+ * FIXME: Remove remaining definitions
+ */
+
#define S3C_CLKREG(x) (S3C_VA_SYS + (x))
-#define S3C_APLL_LOCK S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK S3C_CLKREG(0x08)
-#define S3C_APLL_CON S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0 S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1 S3C_CLKREG(0x18)
-#define S3C_CLK_SRC S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0 S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1 S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2 S3C_CLKREG(0x28)
-#define S3C_CLK_OUT S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE S3C_CLKREG(0x30)
#define S3C_PCLK_GATE S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT (12)
-#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT (9)
-#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT (8)
-#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT (4)
-
-#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT (0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE (1<<31)
-#define S3C_CLKCON_HCLK_UHOST (1<<29)
-#define S3C_CLKCON_HCLK_SECUR (1<<28)
-#define S3C_CLKCON_HCLK_SDMA1 (1<<27)
-#define S3C_CLKCON_HCLK_SDMA0 (1<<26)
-#define S3C_CLKCON_HCLK_IROM (1<<25)
-#define S3C_CLKCON_HCLK_DDR1 (1<<24)
-#define S3C_CLKCON_HCLK_DDR0 (1<<23)
-#define S3C_CLKCON_HCLK_MEM1 (1<<22)
-#define S3C_CLKCON_HCLK_MEM0 (1<<21)
-#define S3C_CLKCON_HCLK_USB (1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2 (1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1 (1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0 (1<<17)
-#define S3C_CLKCON_HCLK_MDP (1<<16)
-#define S3C_CLKCON_HCLK_DHOST (1<<15)
-#define S3C_CLKCON_HCLK_IHOST (1<<14)
-#define S3C_CLKCON_HCLK_DMA1 (1<<13)
-#define S3C_CLKCON_HCLK_DMA0 (1<<12)
-#define S3C_CLKCON_HCLK_JPEG (1<<11)
-#define S3C_CLKCON_HCLK_CAMIF (1<<10)
-#define S3C_CLKCON_HCLK_SCALER (1<<9)
-#define S3C_CLKCON_HCLK_2D (1<<8)
-#define S3C_CLKCON_HCLK_TV (1<<7)
-#define S3C_CLKCON_HCLK_POST0 (1<<5)
-#define S3C_CLKCON_HCLK_ROT (1<<4)
-#define S3C_CLKCON_HCLK_LCD (1<<3)
-#define S3C_CLKCON_HCLK_TZIC (1<<2)
-#define S3C_CLKCON_HCLK_INTC (1<<1)
-#define S3C_CLKCON_HCLK_MFC (1<<0)
-
/* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1 (1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2 (1<<26)
-#define S3C_CLKCON_PCLK_SKEY (1<<24)
-#define S3C_CLKCON_PCLK_CHIPID (1<<23)
-#define S3C_CLKCON_PCLK_SPI1 (1<<22)
-#define S3C_CLKCON_PCLK_SPI0 (1<<21)
-#define S3C_CLKCON_PCLK_HSIRX (1<<20)
-#define S3C_CLKCON_PCLK_HSITX (1<<19)
-#define S3C_CLKCON_PCLK_GPIO (1<<18)
-#define S3C_CLKCON_PCLK_IIC (1<<17)
-#define S3C_CLKCON_PCLK_IIS1 (1<<16)
-#define S3C_CLKCON_PCLK_IIS0 (1<<15)
-#define S3C_CLKCON_PCLK_AC97 (1<<14)
-#define S3C_CLKCON_PCLK_TZPC (1<<13)
-#define S3C_CLKCON_PCLK_TSADC (1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD (1<<11)
-#define S3C_CLKCON_PCLK_IRDA (1<<10)
-#define S3C_CLKCON_PCLK_PCM1 (1<<9)
-#define S3C_CLKCON_PCLK_PCM0 (1<<8)
-#define S3C_CLKCON_PCLK_PWM (1<<7)
-#define S3C_CLKCON_PCLK_RTC (1<<6)
-#define S3C_CLKCON_PCLK_WDT (1<<5)
#define S3C_CLKCON_PCLK_UART3 (1<<4)
#define S3C_CLKCON_PCLK_UART2 (1<<3)
#define S3C_CLKCON_PCLK_UART1 (1<<2)
#define S3C_CLKCON_PCLK_UART0 (1<<1)
-#define S3C_CLKCON_PCLK_MFC (1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST (1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48 (1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48 (1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48 (1<<27)
-#define S3C_CLKCON_SCLK_MMC2 (1<<26)
-#define S3C_CLKCON_SCLK_MMC1 (1<<25)
-#define S3C_CLKCON_SCLK_MMC0 (1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 (1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 (1<<22)
-#define S3C_CLKCON_SCLK_SPI1 (1<<21)
-#define S3C_CLKCON_SCLK_SPI0 (1<<20)
-#define S3C_CLKCON_SCLK_DAC27 (1<<19)
-#define S3C_CLKCON_SCLK_TV27 (1<<18)
-#define S3C_CLKCON_SCLK_SCALER27 (1<<17)
-#define S3C_CLKCON_SCLK_SCALER (1<<16)
-#define S3C_CLKCON_SCLK_LCD27 (1<<15)
-#define S3C_CLKCON_SCLK_LCD (1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13)
-#define S3C6410_CLKCON_FIMC (1<<13)
-#define S3C_CLKCON_SCLK_POST0_27 (1<<12)
-#define S3C6400_CLKCON_SCLK_POST1 (1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11)
-#define S3C_CLKCON_SCLK_POST0 (1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1 (1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0 (1<<8)
-#define S3C_CLKCON_SCLK_SECUR (1<<7)
-#define S3C_CLKCON_SCLK_IRDA (1<<6)
-#define S3C_CLKCON_SCLK_UART (1<<5)
-#define S3C_CLKCON_SCLK_ONENAND (1<<4)
-#define S3C_CLKCON_SCLK_MFC (1<<3)
-#define S3C_CLKCON_SCLK_CAM (1<<2)
-#define S3C_CLKCON_SCLK_JPEG (1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT (1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
-#define S3C6400_CLKSRC_MFC (1 << 4)
/* MEM_SYS_CFG */
#define MEM_SYS_CFG_INDEP_CF 0x4000
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 35e3f54574ef..d266dd5f7060 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -207,7 +207,7 @@ static struct platform_device *anw6410_devices[] __initdata = {
static void __init anw6410_map_io(void)
{
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index eb8e5a1aca42..1a911df9e451 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -743,7 +743,7 @@ static struct s3c2410_platform_i2c i2c1_pdata = {
static void __init crag6410_map_io(void)
{
s3c64xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index f39569e0f2e6..e8064044ef79 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -247,7 +247,7 @@ static struct platform_device *hmt_devices[] __initdata = {
static void __init hmt_map_io(void)
{
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index fc043e3ecdf8..58d46a3d7b78 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -231,7 +231,7 @@ static void __init mini6410_map_io(void)
u32 tmp;
s3c64xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 7e2c3908f1f8..2067b0bf55b4 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -86,7 +86,7 @@ static struct map_desc ncp_iodesc[] __initdata = {};
static void __init ncp_map_io(void)
{
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 86d980b448fd..0f47237be3b2 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -337,13 +337,6 @@ err:
return ret;
}
-static int __init smartq_usb_otg_init(void)
-{
- clk_xusbxti.rate = 12000000;
-
- return 0;
-}
-
static int __init smartq_wifi_init(void)
{
int ret;
@@ -377,7 +370,8 @@ static struct map_desc smartq_iodesc[] __initdata = {};
void __init smartq_map_io(void)
{
s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
+ s3c64xx_set_xusbxti_freq(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -399,7 +393,6 @@ void __init smartq_machine_init(void)
WARN_ON(smartq_lcd_setup_gpio());
WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init());
- WARN_ON(smartq_usb_otg_init());
WARN_ON(smartq_wifi_init());
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index d70c0843aea2..27381cfcabbe 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -65,7 +65,7 @@ static struct map_desc smdk6400_iodesc[] = {};
static void __init smdk6400_map_io(void)
{
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d90b450c5645..2a7b32ca5c96 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -634,7 +634,7 @@ static void __init smdk6410_map_io(void)
u32 tmp;
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 6a1f91fea678..8cdb824a3b43 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -194,29 +194,8 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear)
#endif
static struct sleep_save core_save[] = {
- SAVE_ITEM(S3C_APLL_LOCK),
- SAVE_ITEM(S3C_MPLL_LOCK),
- SAVE_ITEM(S3C_EPLL_LOCK),
- SAVE_ITEM(S3C_CLK_SRC),
- SAVE_ITEM(S3C_CLK_DIV0),
- SAVE_ITEM(S3C_CLK_DIV1),
- SAVE_ITEM(S3C_CLK_DIV2),
- SAVE_ITEM(S3C_CLK_OUT),
- SAVE_ITEM(S3C_HCLK_GATE),
- SAVE_ITEM(S3C_PCLK_GATE),
- SAVE_ITEM(S3C_SCLK_GATE),
- SAVE_ITEM(S3C_MEM0_GATE),
-
- SAVE_ITEM(S3C_EPLL_CON1),
- SAVE_ITEM(S3C_EPLL_CON0),
-
SAVE_ITEM(S3C64XX_MEM0DRVCON),
SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
- SAVE_ITEM(S3C_APLL_CON),
- SAVE_ITEM(S3C_MPLL_CON),
-#endif
};
static struct sleep_save misc_save[] = {
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 4869714c6f1b..331fe8e58145 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -58,12 +58,6 @@ void __init s3c6400_map_io(void)
s3c64xx_onenand1_setname("s3c6400-onenand");
}
-void __init s3c6400_init_clocks(int xtal)
-{
- s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
- s3c64xx_setup_clocks();
-}
-
void __init s3c6400_init_irq(void)
{
/* VIC0 does not have IRQS 5..7,
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 31c29fdf1800..7e6fa125584a 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -62,13 +62,6 @@ void __init s3c6410_map_io(void)
s3c_cfcon_setname("s3c64xx-pata");
}
-void __init s3c6410_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
- s3c64xx_setup_clocks();
-}
-
void __init s3c6410_init_irq(void)
{
/* VIC0 is missing IRQ7, VIC1 is fully populated. */