diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2018-05-14 10:06:34 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2018-05-17 16:22:33 +0900 |
| commit | 3c6b38d45fa51c7c51c5e2347fc1a6bef6a46525 (patch) | |
| tree | 894fdb9fc16319e80fc79a4aeee6873fe4980ef3 /arch/arm/mach-s3c64xx | |
| parent | 456e7cdf3b1a14e2606b8b687385ab2e3f23a49a (diff) | |
| download | linux-3c6b38d45fa51c7c51c5e2347fc1a6bef6a46525.tar.bz2 | |
regulator: wm8994: Pass descriptor instead of GPIO number
Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up from the device tree node or the board file
decriptor table for the regulator.
There is a single board file passing the GPIOs for LDO1 and LDO2
through platform data, so augment this to pass descriptors
associated with the i2c device as well.
The special GPIO enable DT property for the enable GPIO is
nonstandard but this was accomodated in
commit 6a537d48461deacc57c07ed86d9915e5aa4b3539
"gpio: of: Support regulator nonstandard GPIO properties".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'arch/arm/mach-s3c64xx')
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-crag6410-module.c | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 5aa472892465..76c4855a03bc 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -194,8 +194,8 @@ static struct wm8994_pdata wm8994_pdata = { 0x3, /* IRQ out, active high, CMOS */ }, .ldo = { - { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, }, - { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, }, + { .init_data = &wm8994_ldo1, }, + { .init_data = &wm8994_ldo2, }, }, }; @@ -203,6 +203,18 @@ static const struct i2c_board_info wm1277_devs[] = { { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */ .platform_data = &wm8994_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + .dev_name = "wm8958", + }, +}; + +static struct gpiod_lookup_table wm8994_gpiod_table = { + .dev_id = "i2c-wm8958", /* I2C device name */ + .table = { + GPIO_LOOKUP("GPION", 6, + "wlf,ldo1ena", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPION", 4, + "wlf,ldo2ena", GPIO_ACTIVE_HIGH), + { }, }, }; @@ -381,6 +393,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c, gpiod_add_lookup_table(&wm5102_reva_gpiod_table); gpiod_add_lookup_table(&wm5102_gpiod_table); + gpiod_add_lookup_table(&wm8994_gpiod_table); if (i < ARRAY_SIZE(gf_mods)) { dev_info(&i2c->dev, "%s revision %d\n", |