Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson:
 "These changes are all specific to one board only.  We're trying to
  keep the number of board files low, but generally board level updates
  are ok on platforms that are working on moving towards DT based
  probing, which will eventually lead to removing them.

  The board-ams-delta.c board file gets a conflict between the removal
  of ams_delta_config and the addition of a lot of other data.  The
  Kconfig file has two changes in the same line, and in exynos, the
  power domain cleanup conflicts with the addition of the image sensor
  device.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>
  [olof: Amended a fix for a mismerge to board-omap4panda.c]
  Signed-off-by: Olof Johansson <olof@lixom.net>"

Fixed up some fairly trivial conflicts manually.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits)
  i.MX35-PDK: Add Camera support
  ARM : mx35: 3ds-board: add framebuffer device
  pxa/hx4700: Remove pcmcia platform_device structure
  ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35%
  ARM: pxa/hx4700: Remove unwanted request for GPIO105
  ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board
  ARM: EXYNOS: Register JPEG on nuri
  ARM: EXYNOS: Register JPEG on universal_c210
  ARM: S5PV210: Enable JPEG on SMDKV210
  ARM: S5PV210: Add JPEG board definition
  ARM: EXYNOS: Enable JPEG on Origen
  ARM: EXYNOS: Enable JPEG on SMDKV310
  ARM: EXYNOS: Add __init attribute to universal_camera_init()
  ARM: EXYNOS: Add __init attribute to nuri_camera_init()
  ARM: S5PV210: Enable FIMC on SMDKC110
  ARM: S5PV210: Enable FIMC on SMDKV210
  ARM: S5PV210: Enable MFC on SMDKC110
  ARM: S5PV210: Enable MFC on SMDKV210
  ARM: EXYNOS: Enable G2D on SMDKV310
  ARM: tegra: update defconfig
  ...

1 files changed, 66 insertions, 1 deletions

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 3b56bd9cb880..e20bf5835365 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -19,7 +19,9 @@
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/delay.h>
+#include <linux/mmc/host.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/pwm_backlight.h>
@@ -299,6 +301,7 @@ static struct platform_device littlemill_device = {
 };
 
 static struct regulator_consumer_supply wallvdd_consumers[] = {
+	REGULATOR_SUPPLY("SPKVDD", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
@@ -575,11 +578,19 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
 	.frequency = 400000,
 };
 
+static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = {
+	REGULATOR_SUPPLY("DCVDD", "spi0.0"),
+	REGULATOR_SUPPLY("AVDD", "spi0.0"),
+};
+
 static struct regulator_init_data pvdd_1v2 __initdata = {
 	.constraints = {
 		.name = "PVDD_1V2",
-		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 	},
+
+	.consumer_supplies = pvdd_1v2_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
 };
 
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
@@ -593,6 +604,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
 	REGULATOR_SUPPLY("AVDD2", "1-001a"),
 	REGULATOR_SUPPLY("DCVDD", "1-001a"),
 	REGULATOR_SUPPLY("AVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD", "spi0.0"),
 };
 
 static struct regulator_init_data pvdd_1v8 __initdata = {
@@ -682,6 +694,7 @@ static void __init crag6410_map_io(void)
 static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
 	.max_width		= 4,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+	.host_caps		= MMC_CAP_POWER_OFF_CARD,
 };
 
 static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
@@ -697,6 +710,55 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
 	.max_width		= 4,
 	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.cfg_gpio		= crag6410_cfg_sdhci0,
+	.host_caps		= MMC_CAP_POWER_OFF_CARD,
+};
+
+static const struct gpio_led gpio_leds[] = {
+	{
+		.name = "d13:green:",
+		.gpio = MMGPIO_GPIO_BASE + 0,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d14:green:",
+		.gpio = MMGPIO_GPIO_BASE + 1,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d15:green:",
+		.gpio = MMGPIO_GPIO_BASE + 2,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d16:green:",
+		.gpio = MMGPIO_GPIO_BASE + 3,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d17:green:",
+		.gpio = MMGPIO_GPIO_BASE + 4,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d18:green:",
+		.gpio = MMGPIO_GPIO_BASE + 5,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d19:green:",
+		.gpio = MMGPIO_GPIO_BASE + 6,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name = "d20:green:",
+		.gpio = MMGPIO_GPIO_BASE + 7,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+};
+
+static const struct gpio_led_platform_data gpio_leds_pdata = {
+	.leds = gpio_leds,
+	.num_leds = ARRAY_SIZE(gpio_leds),
 };
 
 static struct s3c_hsotg_plat crag6410_hsotg_pdata;
@@ -731,9 +793,12 @@ static void __init crag6410_machine_init(void)
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
+	s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1);
 
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
 
+	gpio_led_register_device(-1, &gpio_leds_pdata);
+
 	regulator_has_full_constraints();
 
 	s3c64xx_pm_init();