Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...

1 files changed, 0 insertions, 821 deletions

diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
deleted file mode 100644
index b41c2cb7af4a..000000000000
--- a/arch/arm/mach-s3c24xx/irq.c
+++ /dev/null
@@ -1,821 +0,0 @@
-/*
- * S3C24XX IRQ handling
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip/chained_irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/pm.h>
-
-#define S3C_IRQTYPE_NONE	0
-#define S3C_IRQTYPE_EINT	1
-#define S3C_IRQTYPE_EDGE	2
-#define S3C_IRQTYPE_LEVEL	3
-
-struct s3c_irq_data {
-	unsigned int type;
-	unsigned long parent_irq;
-
-	/* data gets filled during init */
-	struct s3c_irq_intc *intc;
-	unsigned long sub_bits;
-	struct s3c_irq_intc *sub_intc;
-};
-
-/*
- * Sructure holding the controller data
- * @reg_pending		register holding pending irqs
- * @reg_intpnd		special register intpnd in main intc
- * @reg_mask		mask register
- * @domain		irq_domain of the controller
- * @parent		parent controller for ext and sub irqs
- * @irqs		irq-data, always s3c_irq_data[32]
- */
-struct s3c_irq_intc {
-	void __iomem		*reg_pending;
-	void __iomem		*reg_intpnd;
-	void __iomem		*reg_mask;
-	struct irq_domain	*domain;
-	struct s3c_irq_intc	*parent;
-	struct s3c_irq_data	*irqs;
-};
-
-static void s3c_irq_mask(struct irq_data *data)
-{
-	struct s3c_irq_intc *intc = data->domain->host_data;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
-	struct s3c_irq_data *parent_data;
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = __raw_readl(intc->reg_mask);
-	mask |= (1UL << data->hwirq);
-	__raw_writel(mask, intc->reg_mask);
-
-	if (parent_intc && irq_data->parent_irq) {
-		parent_data = &parent_intc->irqs[irq_data->parent_irq];
-
-		/* check to see if we need to mask the parent IRQ */
-		if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
-			irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-			s3c_irq_mask(irq_get_irq_data(irqno));
-		}
-	}
-}
-
-static void s3c_irq_unmask(struct irq_data *data)
-{
-	struct s3c_irq_intc *intc = data->domain->host_data;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = __raw_readl(intc->reg_mask);
-	mask &= ~(1UL << data->hwirq);
-	__raw_writel(mask, intc->reg_mask);
-
-	if (parent_intc && irq_data->parent_irq) {
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		s3c_irq_unmask(irq_get_irq_data(irqno));
-	}
-}
-
-static inline void s3c_irq_ack(struct irq_data *data)
-{
-	struct s3c_irq_intc *intc = data->domain->host_data;
-	unsigned long bitval = 1UL << data->hwirq;
-
-	__raw_writel(bitval, intc->reg_pending);
-	if (intc->reg_intpnd)
-		__raw_writel(bitval, intc->reg_intpnd);
-}
-
-static int s3c_irqext_type_set(void __iomem *gpcon_reg,
-			       void __iomem *extint_reg,
-			       unsigned long gpcon_offset,
-			       unsigned long extint_offset,
-			       unsigned int type)
-{
-	unsigned long newvalue = 0, value;
-
-	/* Set the GPIO to external interrupt mode */
-	value = __raw_readl(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	__raw_writel(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQ_TYPE_NONE:
-			pr_warn("No edge setting!\n");
-			break;
-
-		case IRQ_TYPE_EDGE_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_BOTH:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQ_TYPE_LEVEL_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQ_TYPE_LEVEL_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			pr_err("No such irq type %d", type);
-			return -EINVAL;
-	}
-
-	value = __raw_readl(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	__raw_writel(value, extint_reg);
-
-	return 0;
-}
-
-static int s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 8) * 4;
-	} else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 16) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if ((data->hwirq >= 0) && (data->hwirq <= 3)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-static struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-};
-
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-	.irq_set_type	= s3c_irqext_type,
-	.irq_set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake,
-	.irq_set_type	= s3c_irqext0_type,
-};
-
-static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct s3c_irq_intc *intc = desc->irq_data.domain->host_data;
-	struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq];
-	struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
-	unsigned long src;
-	unsigned long msk;
-	unsigned int n;
-
-	chained_irq_enter(chip, desc);
-
-	src = __raw_readl(sub_intc->reg_pending);
-	msk = __raw_readl(sub_intc->reg_mask);
-
-	src &= ~msk;
-	src &= irq_data->sub_bits;
-
-	while (src) {
-		n = __ffs(src);
-		src &= ~(1 << n);
-		generic_handle_irq(irq_find_mapping(sub_intc->domain, n));
-	}
-
-	chained_irq_exit(chip, desc);
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- */
-int s3c24xx_set_fiq(unsigned int irq, bool on)
-{
-	u32 intmod;
-	unsigned offs;
-
-	if (on) {
-		offs = irq - FIQ_START;
-		if (offs > 31)
-			return -EINVAL;
-
-		intmod = 1 << offs;
-	} else {
-		intmod = 0;
-	}
-
-	__raw_writel(intmod, S3C2410_INTMOD);
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	struct s3c_irq_intc *intc = h->host_data;
-	struct s3c_irq_data *irq_data = &intc->irqs[hw];
-	struct s3c_irq_intc *parent_intc;
-	struct s3c_irq_data *parent_irq_data;
-	unsigned int irqno;
-
-	if (!intc) {
-		pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw);
-		return -EINVAL;
-	}
-
-	if (!irq_data) {
-		pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw);
-		return -EINVAL;
-	}
-
-	/* attach controller pointer to irq_data */
-	irq_data->intc = intc;
-
-	/* set handler and flags */
-	switch (irq_data->type) {
-	case S3C_IRQTYPE_NONE:
-		return 0;
-	case S3C_IRQTYPE_EINT:
-		if (irq_data->parent_irq)
-			irq_set_chip_and_handler(virq, &s3c_irqext_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_EDGE:
-		if (irq_data->parent_irq ||
-		    intc->reg_pending == S3C2416_SRCPND2)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_LEVEL:
-		if (irq_data->parent_irq)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_level_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_level_irq);
-		break;
-	default:
-		pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
-		return -EINVAL;
-	}
-	set_irq_flags(virq, IRQF_VALID);
-
-	if (irq_data->parent_irq) {
-		parent_intc = intc->parent;
-		if (!parent_intc) {
-			pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
-			       hw);
-			goto err;
-		}
-
-		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
-		if (!irq_data) {
-			pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n",
-			       hw);
-			goto err;
-		}
-
-		parent_irq_data->sub_intc = intc;
-		parent_irq_data->sub_bits |= (1UL << hw);
-
-		/* attach the demuxer to the parent irq */
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		if (!irqno) {
-			pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
-			       irq_data->parent_irq);
-			goto err;
-		}
-		irq_set_chained_handler(irqno, s3c_irq_demux);
-	}
-
-	return 0;
-
-err:
-	set_irq_flags(virq, 0);
-
-	/* the only error can result from bad mapping data*/
-	return -EINVAL;
-}
-
-static struct irq_domain_ops s3c24xx_irq_ops = {
-	.map = s3c24xx_irq_map,
-	.xlate = irq_domain_xlate_twocell,
-};
-
-static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
-{
-	void __iomem *reg_source;
-	unsigned long pend;
-	unsigned long last;
-	int i;
-
-	/* if intpnd is set, read the next pending irq from there */
-	reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(reg_source);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, intc->reg_pending);
-		if (intc->reg_intpnd)
-			__raw_writel(pend, intc->reg_intpnd);
-
-		pr_info("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-}
-
-struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
-				       struct s3c_irq_data *irq_data,
-				       struct s3c_irq_intc *parent,
-				       unsigned long address)
-{
-	struct s3c_irq_intc *intc;
-	void __iomem *base = (void *)0xf6000000; /* static mapping */
-	int irq_num;
-	int irq_start;
-	int irq_offset;
-	int ret;
-
-	intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
-	if (!intc)
-		return ERR_PTR(-ENOMEM);
-
-	intc->irqs = irq_data;
-
-	if (parent)
-		intc->parent = parent;
-
-	/* select the correct data for the controller.
-	 * Need to hard code the irq num start and offset
-	 * to preserve the static mapping for now
-	 */
-	switch (address) {
-	case 0x4a000000:
-		pr_debug("irq: found main intc\n");
-		intc->reg_pending = base;
-		intc->reg_mask = base + 0x08;
-		intc->reg_intpnd = base + 0x10;
-		irq_num = 32;
-		irq_start = S3C2410_IRQ(0);
-		irq_offset = 0;
-		break;
-	case 0x4a000018:
-		pr_debug("irq: found subintc\n");
-		intc->reg_pending = base + 0x18;
-		intc->reg_mask = base + 0x1c;
-		irq_num = 29;
-		irq_start = S3C2410_IRQSUB(0);
-		irq_offset = 0;
-		break;
-	case 0x4a000040:
-		pr_debug("irq: found intc2\n");
-		intc->reg_pending = base + 0x40;
-		intc->reg_mask = base + 0x48;
-		intc->reg_intpnd = base + 0x50;
-		irq_num = 8;
-		irq_start = S3C2416_IRQ(0);
-		irq_offset = 0;
-		break;
-	case 0x560000a4:
-		pr_debug("irq: found eintc\n");
-		base = (void *)0xfd000000;
-
-		intc->reg_mask = base + 0xa4;
-		intc->reg_pending = base + 0xa8;
-		irq_num = 20;
-		irq_start = S3C2410_IRQ(32);
-		irq_offset = 4;
-		break;
-	default:
-		pr_err("irq: unsupported controller address\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	/* now that all the data is complete, init the irq-domain */
-	s3c24xx_clear_intc(intc);
-	intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
-					     irq_offset, &s3c24xx_irq_ops,
-					     intc);
-	if (!intc->domain) {
-		pr_err("irq: could not create irq-domain\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	return intc;
-
-err:
-	kfree(intc);
-	return ERR_PTR(ret);
-}
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-static struct s3c_irq_data init_base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_eint[32] = {
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-static struct s3c_irq_data init_subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-};
-
-void __init s3c24xx_init_irq(void)
-{
-	struct s3c_irq_intc *main_intc;
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000);
-	if (IS_ERR(main_intc)) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018);
-	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
-}
-
-#ifdef CONFIG_CPU_S3C2416
-static struct s3c_irq_data init_s3c2416base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2416subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-static struct s3c_irq_data init_s3c2416_second[32] = {
-	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
-	{ .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
-	{ .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
-	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
-	{ .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
-};
-
-void __init s3c2416_init_irq(void)
-{
-	struct s3c_irq_intc *main_intc;
-
-	pr_info("S3C2416: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000);
-	if (IS_ERR(main_intc)) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
-	s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018);
-
-	s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040);
-}
-
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-static struct s3c_irq_data init_s3c2443base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* CFON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-
-static struct s3c_irq_data init_s3c2443subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2443_init_irq(void)
-{
-	struct s3c_irq_intc *main_intc;
-
-	pr_info("S3C2443: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000);
-	if (IS_ERR(main_intc)) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
-	s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
-}
-#endif