diff options
| author | Russell King <rmk@dyn-67.arm.linux.org.uk> | 2008-08-05 16:14:15 +0100 |
|---|---|---|
| committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2008-08-07 09:55:48 +0100 |
| commit | a09e64fbc0094e3073dbb09c3b4bfe4ab669244b (patch) | |
| tree | 69689f467179891b498bd7423fcf61925173db31 /arch/arm/mach-realview | |
| parent | a1b81a84fff05dbfef45b7012c26e1fee9973e5d (diff) | |
| download | linux-a09e64fbc0094e3073dbb09c3b4bfe4ab669244b.tar.bz2 | |
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-realview')
23 files changed, 1310 insertions, 15 deletions
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index b63fa88fb42b..4f9c84ab781c 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -29,7 +29,7 @@ #include <linux/clockchips.h> #include <asm/system.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/leds.h> diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h new file mode 100644 index 000000000000..8d699fd324d0 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -0,0 +1,191 @@ +/* + * arch/arm/mach-realview/include/mach/board-eb.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_EB_H +#define __ASM_ARCH_BOARD_EB_H + +#include <mach/platform.h> + +/* + * RealView EB + ARM11MPCore peripheral addresses + */ +#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */ + +#define REALVIEW_EB_FLASH_BASE 0x40000000 +#define REALVIEW_EB_FLASH_SIZE SZ_64M +#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ + +#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB +#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ +#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB11MP_TWD_BASE 0x10100700 +#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 +#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ +#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ +#else +#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */ +#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB11MP_TWD_BASE 0x1F000700 +#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 +#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ +#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ +#endif + +#define IRQ_EB_GIC_START 32 + +/* + * RealView EB interrupt sources + */ +#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ +#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ +#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ +#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ +#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ +#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ +#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ +#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ +#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ +#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ +#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ +#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ +#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ +#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ +#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ +#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ + +/* + * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) + */ +#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) +#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) +#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) +#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) +#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) +#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) +#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) +#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) +#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) +#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) +#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ +#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ +#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ +#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ +#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) +#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) + +#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) +#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) +#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) +#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) +#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) +#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) +#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) +#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) +#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) +#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) +#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) +#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) + +#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) +#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) +#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) + +#define IRQ_EB11MP_UART2 -1 +#define IRQ_EB11MP_UART3 -1 +#define IRQ_EB11MP_CLCD -1 +#define IRQ_EB11MP_DMA -1 +#define IRQ_EB11MP_WDOG -1 +#define IRQ_EB11MP_GPIO0 -1 +#define IRQ_EB11MP_GPIO1 -1 +#define IRQ_EB11MP_GPIO2 -1 +#define IRQ_EB11MP_SCI -1 +#define IRQ_EB11MP_SSP -1 + +#define NR_GIC_EB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_EB + */ +#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_EB) \ + && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_EB +#endif + +#if defined(CONFIG_REALVIEW_EB_ARM11MP) \ + && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_EB11MP +#endif + +/* + * Core tile identification (REALVIEW_SYS_PROCID) + */ +#define REALVIEW_EB_PROC_MASK 0xFF000000 +#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000 +#define REALVIEW_EB_PROC_ARM9 0x02000000 +#define REALVIEW_EB_PROC_ARM11 0x04000000 +#define REALVIEW_EB_PROC_ARM11MP 0x06000000 + +#define check_eb_proc(proc_type) \ + ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \ + == proc_type) + +#ifdef CONFIG_REALVIEW_EB_ARM11MP +#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP) +#else +#define core_tile_eb11mp() 0 +#endif + +#endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h new file mode 100644 index 000000000000..858eea7b1adc --- /dev/null +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -0,0 +1,152 @@ +/* + * arch/arm/mach-realview/include/mach/board-pb1176.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PB1176_H +#define __ASM_ARCH_BOARD_PB1176_H + +#include <mach/platform.h> + +/* + * Peripheral addresses + */ +#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ +#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ +#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ +#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ +#define REALVIEW_PB1176_FLASH_BASE 0x30000000 +#define REALVIEW_PB1176_FLASH_SIZE SZ_64M + +#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ +#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ +#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */ +#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */ +#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */ +#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */ +#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */ +#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */ +#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */ +#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */ +#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */ +#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */ +#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */ +#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */ + +/* + * PCI regions + */ +#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */ +#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */ +#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */ +#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */ +#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */ +#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */ + +#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */ + +#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ +#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ +#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ +#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ +#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ + +/* + * Irqs + */ +#define IRQ_DC1176_GIC_START 32 +#define IRQ_PB1176_GIC_START 64 + +/* + * ARM1176 DevChip interrupt sources (primary GIC) + */ +#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ +#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ +#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ +#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ +#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ +#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) +#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) +#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) +#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) +#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ +#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ +#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ +#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ + +#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ +#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ + +/* + * RealView PB1176 interrupt sources (secondary GIC) + */ +#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ +#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ +#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ +#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ +#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) +#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ +#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ +#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) +#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) +#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ +#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ + +#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) + +#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ + +#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) +#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) +#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ +#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ + +#define IRQ_PB1176_GPIO0 -1 +#define IRQ_PB1176_SSP -1 +#define IRQ_PB1176_SCTL -1 + +#define NR_GIC_PB1176 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB1176 + */ +#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB1176) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB1176 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB1176 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB1176 */ + +#endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h new file mode 100644 index 000000000000..ecd80e58631e --- /dev/null +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -0,0 +1,186 @@ +/* + * arch/arm/mach-realview/include/mach/board-pb11mp.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PB11MP_H +#define __ASM_ARCH_BOARD_PB11MP_H + +#include <mach/platform.h> + +/* + * Peripheral addresses + */ +#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */ +#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ +#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000 +#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M +#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000 +#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M +#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74 + +/* + * PB11MPCore PCI regions + */ +#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +/* + * Testchip peripheral and fpga gic regions + */ +#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ +#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ +#define REALVIEW_TC11MP_TWD_BASE 0x1F000700 +#define REALVIEW_TC11MP_TWD_SIZE 0x00000100 +#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ +#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ + +/* + * Irqs + */ +#define IRQ_TC11MP_GIC_START 32 +#define IRQ_PB11MP_GIC_START 64 + +/* + * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) + */ +#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) +#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) +#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) +#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) +#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) +#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) +#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) +#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) +#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) +#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) +#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ +#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ +#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ +#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ +#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) +#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) + +#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) +#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) +#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) +#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) +#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) +#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) +#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) +#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) +#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) +#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) +#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) +#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) + +#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) +#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) + +/* + * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) + */ +#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ +#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ +#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ +#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ +#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ +#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ +#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ +#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ +#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PB11MP_SMC -1 +#define IRQ_PB11MP_SCTL -1 + +#define NR_GIC_PB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB11MP + */ +#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB11MP) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB11MP +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB11MP +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB11MP */ + +#endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S new file mode 100644 index 000000000000..7196bcadff0c --- /dev/null +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -0,0 +1,22 @@ +/* arch/arm/mach-realview/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x10000000 + movne \rx, #0xf0000000 @ virtual base + orr \rx, \rx, #0x00009000 + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-realview/include/mach/dma.h b/arch/arm/mach-realview/include/mach/dma.h new file mode 100644 index 000000000000..f1a5a1a10952 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/dma.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-realview/include/mach/dma.h + * + * Copyright (C) 2003 ARM Limited. + * Copyright (C) 1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S new file mode 100644 index 000000000000..340a5c276946 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/entry-macro.S @@ -0,0 +1,81 @@ +/* + * arch/arm/mach-realview/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for RealView platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h new file mode 100644 index 000000000000..79a93b3dfca9 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/hardware.h @@ -0,0 +1,31 @@ +/* + * arch/arm/mach-realview/include/mach/hardware.h + * + * This file contains the hardware definitions of the RealView boards. + * + * Copyright (C) 2003 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <asm/sizes.h> + +/* macro to get at IO space when running virtually */ +#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000) +#define __io_address(n) __io(IO_ADDRESS(n)) + +#endif diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h new file mode 100644 index 000000000000..aa069424d310 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/io.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-realview/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} + +#define __io(a) __io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h new file mode 100644 index 000000000000..02a918529db3 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/irqs.h @@ -0,0 +1,38 @@ +/* + * arch/arm/mach-realview/include/mach/irqs.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include <mach/board-eb.h> +#include <mach/board-pb11mp.h> +#include <mach/board-pb1176.h> + +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 + +#define IRQ_GIC_START 32 + +#ifndef NR_IRQS +#error "NR_IRQS not defined by the board-specific files" +#endif + +#endif diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h new file mode 100644 index 000000000000..0e673483a141 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -0,0 +1,38 @@ +/* + * arch/arm/mach-realview/include/mach/memory.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x00000000) + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#define __virt_to_bus(x) ((x) - PAGE_OFFSET) +#define __bus_to_virt(x) ((x) + PAGE_OFFSET) + +#endif diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h new file mode 100644 index 000000000000..4034b54950c2 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -0,0 +1,293 @@ +/* + * arch/arm/mach-realview/include/mach/platform.h + * + * Copyright (c) ARM Limited 2003. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_PLATFORM_H +#define __ASM_ARCH_PLATFORM_H + +/* + * Memory definitions + */ +#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ +#define REALVIEW_BOOT_ROM_HI 0x30000000 +#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */ +#define REALVIEW_BOOT_ROM_SIZE SZ_64M + +#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */ +#define REALVIEW_SSRAM_SIZE SZ_2M + +/* + * SDRAM + */ +#define REALVIEW_SDRAM_BASE 0x00000000 + +/* + * Logic expansion modules + * + */ + + +/* ------------------------------------------------------------------------ + * RealView Registers + * ------------------------------------------------------------------------ + * + */ +#define REALVIEW_SYS_ID_OFFSET 0x00 +#define REALVIEW_SYS_SW_OFFSET 0x04 +#define REALVIEW_SYS_LED_OFFSET 0x08 +#define REALVIEW_SYS_OSC0_OFFSET 0x0C + +#define REALVIEW_SYS_OSC1_OFFSET 0x10 +#define REALVIEW_SYS_OSC2_OFFSET 0x14 +#define REALVIEW_SYS_OSC3_OFFSET 0x18 +#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */ + +#define REALVIEW_SYS_LOCK_OFFSET 0x20 +#define REALVIEW_SYS_100HZ_OFFSET 0x24 +#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28 +#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C +#define REALVIEW_SYS_FLAGS_OFFSET 0x30 +#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 +#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34 +#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38 +#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38 +#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C +#define REALVIEW_SYS_RESETCTL_OFFSET 0x40 +#define REALVIEW_SYS_PCICTL_OFFSET 0x44 +#define REALVIEW_SYS_MCI_OFFSET 0x48 +#define REALVIEW_SYS_FLASH_OFFSET 0x4C +#define REALVIEW_SYS_CLCD_OFFSET 0x50 +#define REALVIEW_SYS_CLCDSER_OFFSET 0x54 +#define REALVIEW_SYS_BOOTCS_OFFSET 0x58 +#define REALVIEW_SYS_24MHz_OFFSET 0x5C +#define REALVIEW_SYS_MISC_OFFSET 0x60 +#define REALVIEW_SYS_IOSEL_OFFSET 0x70 +#define REALVIEW_SYS_PROCID_OFFSET 0x84 +#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0 +#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4 +#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8 +#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC +#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0 + +#define REALVIEW_SYS_BASE 0x10000000 +#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET) +#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET) +#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET) +#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET) +#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET) + +#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET) +#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET) +#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET) +#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET) +#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET) +#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET) +#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET) +#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET) +#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET) +#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET) +#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET) +#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET) +#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET) +#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET) +#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET) +#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET) +#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET) +#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET) +#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET) +#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET) +#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET) +#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET) +#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET) +#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET) +#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) +#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) + +/* + * Values for REALVIEW_SYS_RESET_CTRL + */ +#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01 +#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02 +#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03 +#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04 +#define REALVIEW_SYS_CTRL_RESET_POR 0x05 +#define REALVIEW_SYS_CTRL_RESET_DoC 0x06 + +#define REALVIEW_SYS_CTRL_LED (1 << 0) + + +/* ------------------------------------------------------------------------ + * RealView control registers + * ------------------------------------------------------------------------ + */ + +/* + * REALVIEW_IDFIELD + * + * 31:24 = manufacturer (0x41 = ARM) + * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) + * 15:12 = FPGA (0x3 = XVC600 or XVC600E) + * 11:4 = build value + * 3:0 = revision number (0x1 = rev B (AHB)) + */ + +/* + * REALVIEW_SYS_LOCK + * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, + * SYS_CLD, SYS_BOOTCS + */ +#define REALVIEW_SYS_LOCK_LOCKED (1 << 16) +#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ + +/* + * REALVIEW_SYS_FLASH + */ +#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ + +/* + * REALVIEW_INTREG + * - used to acknowledge and control MMCI and UART interrupts + */ +#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ +#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ +#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */ + /* write 1 to acknowledge and clear */ +#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ +#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ + +/* + * RealView common peripheral addresses + */ +#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */ +#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */ +#define REALVIEW_AACI_BASE 0x10004000 /* Audio */ +#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */ +#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */ +#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */ +#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */ +#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */ +#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */ +#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */ +#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */ +#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ + +/* PCI space */ +#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */ +#define REALVIEW_PCI_CFG_BASE 0x42000000 +#define REALVIEW_PCI_MEM_BASE0 0x44000000 +#define REALVIEW_PCI_MEM_BASE1 0x50000000 +#define REALVIEW_PCI_MEM_BASE2 0x60000000 +/* Sizes of above maps */ +#define REALVIEW_PCI_BASE_SIZE 0x01000000 +#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000 +#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ +#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ +#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ + +#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ +#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */ + +/* + * Disk on Chip + */ +#define REALVIEW_DOC_BASE 0x2C000000 +#define REALVIEW_DOC_SIZE (16 << 20) +#define REALVIEW_DOC_PAGE_SIZE 512 +#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) + +#define ERASE_UNIT_PAGES 32 +#define START_PAGE 0x80 + +/* + * LED settings, bits [7:0] + */ +#define REALVIEW_SYS_LED0 (1 << 0) +#define REALVIEW_SYS_LED1 (1 << 1) +#define REALVIEW_SYS_LED2 (1 << 2) +#define REALVIEW_SYS_LED3 (1 << 3) +#define REALVIEW_SYS_LED4 (1 << 4) +#define REALVIEW_SYS_LED5 (1 << 5) +#define REALVIEW_SYS_LED6 (1 << 6) +#define REALVIEW_SYS_LED7 (1 << 7) + +#define ALL_LEDS 0xFF + +#define LED_BANK REALVIEW_SYS_LED + +/* + * Control registers + */ +#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */ +#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */ +#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ +#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ + +/* + * Application Flash + * + */ +#define FLASH_BASE REALVIEW_FLASH_BASE +#define FLASH_SIZE REALVIEW_FLASH_SIZE +#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) +#define FLASH_BLOCK_SIZE SZ_128K + +/* + * Boot Flash + * + */ +#define EPROM_BASE REALVIEW_BOOT_ROM_HI +#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE +#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) + +/* + * Clean base - dummy + * + */ +#define CLEAN_BASE EPROM_BASE + +/* + * System controller bit assignment + */ +#define REALVIEW_REFCLK 0 +#define REALVIEW_TIMCLK 1 + +#define REALVIEW_TIMER1_EnSel 15 +#define REALVIEW_TIMER2_EnSel 17 +#define REALVIEW_TIMER3_EnSel 19 +#define REALVIEW_TIMER4_EnSel 21 + + +#define MAX_TIMER 2 +#define MAX_PERIOD 699050 +#define TICKS_PER_uSEC 1 + +/* + * These are useconds NOT ticks. + * + */ +#define mSEC_1 1000 +#define mSEC_5 (mSEC_1 * 5) +#define mSEC_10 (mSEC_1 * 10) +#define mSEC_25 (mSEC_1 * 25) +#define SEC_1 (mSEC_1 * 1000) + +#define REALVIEW_CSR_BASE 0x10000000 +#define REALVIEW_CSR_SIZE 0x10000000 + +#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h new file mode 100644 index 000000000000..d55802d645af --- /dev/null +++ b/arch/arm/mach-realview/include/mach/scu.h @@ -0,0 +1,13 @@ +#ifndef __ASMARM_ARCH_SCU_H +#define __ASMARM_ARCH_SCU_H + +/* + * SCU registers + */ +#define SCU_CTRL 0x00 +#define SCU_CONFIG 0x04 +#define SCU_CPU_STATUS 0x08 +#define SCU_INVALIDATE 0x0c +#define SCU_FPGA_REVISION 0x10 + +#endif diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h new file mode 100644 index 000000000000..515819efd046 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -0,0 +1,30 @@ +#ifndef ASMARM_ARCH_SMP_H +#define ASMARM_ARCH_SMP_H + + +#include <asm/hardware/gic.h> + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +/* + * We use IRQ1 as the IPI + */ +static inline void smp_cross_call(cpumask_t callmap) +{ + gic_raise_softirq(callmap, 1); +} + +/* + * Do nothing on MPcore. + */ +static inline void smp_cross_call_done(cpumask_t callmap) +{ +} + +#endif diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h new file mode 100644 index 000000000000..4d3c8f3f8053 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/system.h @@ -0,0 +1,51 @@ +/* + * arch/arm/mach-realview/include/mach/system.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <mach/hardware.h> +#include <asm/io.h> +#include <mach/platform.h> + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET; + unsigned int val; + + /* + * To reset, we hit the on-board reset register + * in the system FPGA + */ + val = __raw_readl(hdr_ctrl); + val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR; + __raw_writel(val, hdr_ctrl); +} + +#endif diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h new file mode 100644 index 000000000000..4eeb069373c2 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/timex.h @@ -0,0 +1,23 @@ +/* + * arch/arm/mach-realview/include/mach/timex.h + * + * RealView architecture timex specifications + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h new file mode 100644 index 000000000000..79f50f218e77 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/uncompress.h @@ -0,0 +1,72 @@ +/* + * arch/arm/mach-realview/include/mach/uncompress.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#include <mach/board-eb.h> +#include <mach/board-pb11mp.h> +#include <mach/board-pb1176.h> + +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +/* + * Return the UART base address + */ +static inline unsigned long get_uart_base(void) +{ + if (machine_is_realview_eb()) + return REALVIEW_EB_UART0_BASE; + else if (machine_is_realview_pb11mp()) + return REALVIEW_PB11MP_UART0_BASE; + else if (machine_is_realview_pb1176()) + return REALVIEW_PB1176_UART0_BASE; + else + return 0; +} + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) + barrier(); + + AMBA_UART_DR(base) = c; +} + +static inline void flush(void) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h new file mode 100644 index 000000000000..48cbcc873db2 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/vmalloc.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-realview/include/mach/vmalloc.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index 7631f3ea851b..82fa1f26e026 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -20,7 +20,7 @@ #include <asm/hardware/arm_twd.h> #include <asm/hardware/gic.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index c1e579cbaa76..1907d22f4fed 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -15,13 +15,13 @@ #include <linux/smp.h> #include <asm/cacheflush.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/mach-types.h> -#include <asm/arch/board-eb.h> -#include <asm/arch/board-pb11mp.h> -#include <asm/arch/scu.h> +#include <mach/board-eb.h> +#include <mach/board-pb11mp.h> +#include <mach/scu.h> extern void realview_secondary_startup(void); diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 66c1f3e47f69..19a9968fc5b9 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -24,7 +24,7 @@ #include <linux/sysdev.h> #include <linux/amba/bus.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/leds.h> @@ -38,8 +38,8 @@ #include <asm/mach/mmc.h> #include <asm/mach/time.h> -#include <asm/arch/board-eb.h> -#include <asm/arch/irqs.h> +#include <mach/board-eb.h> +#include <mach/irqs.h> #include "core.h" #include "clock.h" diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index a00588a8d8f8..0986cbd15943 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -24,7 +24,7 @@ #include <linux/sysdev.h> #include <linux/amba/bus.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/leds.h> @@ -39,8 +39,8 @@ #include <asm/mach/mmc.h> #include <asm/mach/time.h> -#include <asm/arch/board-pb1176.h> -#include <asm/arch/irqs.h> +#include <mach/board-pb1176.h> +#include <mach/irqs.h> #include "core.h" #include "clock.h" diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 018898708b7a..f4e7135e3eb5 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -24,7 +24,7 @@ #include <linux/sysdev.h> #include <linux/amba/bus.h> -#include <asm/arch/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/leds.h> @@ -39,8 +39,8 @@ #include <asm/mach/mmc.h> #include <asm/mach/time.h> -#include <asm/arch/board-pb11mp.h> -#include <asm/arch/irqs.h> +#include <mach/board-pb11mp.h> +#include <mach/irqs.h> #include "core.h" #include "clock.h" |