Merge branch 'devel-stable' into devel

51 files changed, 4090 insertions, 3814 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3b51741a4810..7aefb9074852 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -238,6 +238,17 @@ config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
 	select PXA27x
 
+config MACH_COLIBRI_PXA270_EVALBOARD
+	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
+	depends on MACH_COLIBRI
+
+config MACH_COLIBRI_PXA270_INCOME
+	bool "Income s.r.o. PXA270 SBC"
+	depends on MACH_COLIBRI
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
 	select PXA3xx
@@ -336,6 +347,9 @@ config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
 	select HAVE_PWM
 
+config MACH_PALM27X
+	bool
+
 config MACH_PALMTE2
 	bool "Palm Tungsten|E2"
 	default y
@@ -360,6 +374,7 @@ config MACH_PALMT5
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 	  handheld computer.
@@ -370,6 +385,7 @@ config MACH_PALMTX
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on a Palm T|X
 	  handheld computer.
@@ -380,6 +396,7 @@ config MACH_PALMZ72
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
@@ -390,6 +407,7 @@ config MACH_PALMLD
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on a Palm LifeDrive
 	  handheld computer.
@@ -447,16 +465,13 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-	select SHARPSL_PM_MAX1111
-
-config SHARPSL_PM_MAX1111
-	bool
-	depends on !CORGI_SSP_DEPRECATED
-	select HWMON
-	select SENSORS_MAX1111
+config PXA_SHARPSL_DETECT_MACH_ID
+	bool "Detect machine ID at run-time in the decompressor"
+	depends on PXA_SHARPSL
+	help
+	  Say Y here if you want the zImage decompressor to detect
+	  the Zaurus machine ID at run-time. For latest kexec-based
+	  boot loader, this is not necessary.
 
 config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
@@ -510,6 +525,25 @@ config MACH_TOSA
 	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
+config TOSA_USE_EXT_KEYCODES
+	bool "Tosa keyboard: use extended keycodes"
+	depends on MACH_TOSA
+	default n
+	help
+	  Say Y here to enable the tosa keyboard driver to generate extended
+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+	  by either console keyboard driver or by Kdrive keybd driver.
+
+	  Say Y only if you know, what you are doing!
+
 config MACH_ICONTROL
 	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
 	select CPU_PXA320
@@ -648,25 +682,15 @@ config PXA_SHARP_Cxx00
 	help
 	  Enable common support for Sharp Cxx00 models
 
-config TOSA_BT
-	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on MACH_TOSA
-	default n
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+	select SHARPSL_PM_MAX1111
 
+config SHARPSL_PM_MAX1111
+	bool
+	select HWMON
+	select SENSORS_MAX1111
 
 config PXA_HAVE_BOARD_IRQS
 	bool
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index b8f1f4bc7ca7..85c7fb324dbb 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -51,14 +51,16 @@ obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_INTELMOTE2)	+= stargate2.o
 obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_XCEP)         += xcep.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
 obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)	+= colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
 obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
@@ -73,6 +75,7 @@ obj-$(CONFIG_PXA_EZX)           += ezx.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
 obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
+obj-$(CONFIG_MACH_PALM27X)	+= palm27x.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
@@ -84,12 +87,6 @@ obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_E330)		+= e330.o
-obj-$(CONFIG_MACH_E350)		+= e350.o
-obj-$(CONFIG_MACH_E740)		+= e740.o
-obj-$(CONFIG_MACH_E750)		+= e750.o
-obj-$(CONFIG_MACH_E400)		+= e400.o
-obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f3b5ace815e5..9041340fee1d 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -22,9 +22,14 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/ioport.h>
+#include <linux/ucb1400.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/types.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/max1586.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -51,6 +56,59 @@
 #include "generic.h"
 #include "devices.h"
 
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* Reset, configured as GPIO wakeup source */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* LEDs */
+	GPIO9_GPIO,	/* NAND activity LED */
+	GPIO10_GPIO,	/* Heartbeat LED */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	/* USB Host */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
 static unsigned long balloon3_irq_enabled;
 
 static unsigned long balloon3_features_present =
@@ -73,6 +131,321 @@ int __init parse_balloon3_features(char *arg)
 }
 early_param("balloon3_features", parse_balloon3_features);
 
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition balloon3_nor_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data balloon3_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= balloon3_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
+	}
+};
+
+static struct resource balloon3_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device balloon3_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &balloon3_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = balloon3_flash_data,
+	},
+};
+static void __init balloon3_nor_init(void)
+{
+	platform_device_register(&balloon3_flash);
+}
+#else
+static inline void balloon3_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+	.irq		= IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+};
+
+
+static struct platform_device balloon3_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &vpac270_ucb1400_pdata,
+	},
+};
+
+static void __init balloon3_ts_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
+		return;
+
+	pxa_set_ac97_info(NULL);
+	platform_device_register(&balloon3_ucb1400_device);
+}
+#else
+static inline void balloon3_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+	{
+		.pixclock		= 38000,
+		.xres			= 480,
+		.yres			= 640,
+		.bpp			= 16,
+		.hsync_len		= 8,
+		.left_margin		= 8,
+		.right_margin		= 8,
+		.vsync_len		= 2,
+		.upper_margin		= 4,
+		.lower_margin		= 5,
+		.sync			= 0,
+	},
+};
+
+static struct pxafb_mach_info balloon3_lcd_screen = {
+	.modes			= balloon3_lcd_modes,
+	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void balloon3_backlight_power(int on)
+{
+	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static void __init balloon3_lcd_init(void)
+{
+	int ret;
+
+	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
+		return;
+
+	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
+	if (ret) {
+		pr_err("Requesting BKL-ON GPIO failed!\n");
+		goto err;
+	}
+
+	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+	if (ret) {
+		pr_err("Setting BKL-ON GPIO direction failed!\n");
+		goto err2;
+	}
+
+	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
+	set_pxa_fb_info(&balloon3_lcd_screen);
+	return;
+
+err2:
+	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
+err:
+	return;
+}
+#else
+static inline void balloon3_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init balloon3_mmc_init(void)
+{
+	pxa_set_mci_info(&balloon3_mci_platform_data);
+}
+#else
+static inline void balloon3_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static void balloon3_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR &= ~UP2OCR_DPPUE;
+}
+
+static int balloon3_udc_is_connected(void)
+{
+	return 1;
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
+	.udc_command		= balloon3_udc_command,
+	.udc_is_connected	= balloon3_udc_is_connected,
+	.gpio_pullup		= -1,
+};
+
+static void __init balloon3_udc_init(void)
+{
+	pxa_set_udc_info(&balloon3_udc_info);
+	platform_device_register(&balloon3_gpio_vbus);
+}
+#else
+static inline void balloon3_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
+};
+
+static void __init balloon3_irda_init(void)
+{
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+}
+#else
+static inline void balloon3_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data balloon3_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init balloon3_uhc_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
+		return;
+	pxa_set_ohci_info(&balloon3_ohci_info);
+}
+#else
+static inline void balloon3_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led balloon3_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:idle",
+		.default_trigger	= "heartbeat",
+		.gpio			= BALLOON3_GPIO_LED_IDLE,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:green:nand",
+		.default_trigger	= "nand-disk",
+		.gpio			= BALLOON3_GPIO_LED_NAND,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_gpio_led_info = {
+	.leds		= balloon3_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3_leds = {
+	.name	= "leds-gpio",
+	.id	= 0,
+	.dev	= {
+		.platform_data	= &balloon3_gpio_led_info,
+	}
+};
+
+struct gpio_led balloon3_pcf_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:led0",
+		.gpio			= BALLOON3_PCF_GPIO_LED0,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:green:led1",
+		.gpio			= BALLOON3_PCF_GPIO_LED1,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led2",
+		.gpio			= BALLOON3_PCF_GPIO_LED2,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led3",
+		.gpio			= BALLOON3_PCF_GPIO_LED3,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led4",
+		.gpio			= BALLOON3_PCF_GPIO_LED4,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led5",
+		.gpio			= BALLOON3_PCF_GPIO_LED5,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:red:led6",
+		.gpio			= BALLOON3_PCF_GPIO_LED6,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:red:led7",
+		.gpio			= BALLOON3_PCF_GPIO_LED7,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
+	.leds		= balloon3_pcf_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
+};
+
+static struct platform_device balloon3_pcf_leds = {
+	.name	= "leds-gpio",
+	.id	= 1,
+	.dev	= {
+		.platform_data	= &balloon3_pcf_gpio_led_info,
+	}
+};
+
+static void __init balloon3_leds_init(void)
+{
+	platform_device_register(&balloon3_leds);
+	platform_device_register(&balloon3_pcf_leds);
+}
+#else
+static inline void balloon3_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
 static void balloon3_mask_irq(unsigned int irq)
 {
 	int balloon3_irq = (irq - BALLOON3_IRQ(0));
@@ -98,7 +471,6 @@ static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
 					balloon3_irq_enabled;
-
 	do {
 		/* clear useless edge notification */
 		if (desc->chip->ack)
@@ -132,201 +504,259 @@ static void __init balloon3_init_irq(void)
 		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
 }
 
-static unsigned long balloon3_ac97_pin_config[] = {
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-};
-
-static void balloon3_backlight_power(int on)
-{
-	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
-	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static unsigned long balloon3_lcd_pin_config[] = {
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-
-	GPIO99_GPIO,		/* Backlight */
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
+static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
+	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
+	.n_latch	= 0,
+	.setup		= NULL,
+	.teardown	= NULL,
+	.context	= NULL,
 };
 
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
+static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
 	{
-		.pixclock		= 38000,
-		.xres			= 480,
-		.yres			= 640,
-		.bpp			= 16,
-		.hsync_len		= 8,
-		.left_margin		= 8,
-		.right_margin		= 8,
-		.vsync_len		= 2,
-		.upper_margin		= 4,
-		.lower_margin		= 5,
-		.sync			= 0,
+		I2C_BOARD_INFO("pcf8574a", 0x38),
+		.platform_data	= &balloon3_pcf857x_pdata,
 	},
 };
 
-static struct pxafb_mach_info balloon3_pxafb_info = {
-	.modes			= balloon3_lcd_modes,
-	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_backlight_power	= balloon3_backlight_power,
-};
+static void __init balloon3_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
+}
+#else
+static inline void balloon3_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static uint16_t balloon3_ctl =
+	BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+	BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+	BALLOON3_NAND_CONTROL_FLWP;
+
+static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
 
-static unsigned long balloon3_mmc_pin_config[] = {
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-};
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_CLE)
+			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+		else
+			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
 
-static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		pr_debug("%s: on\n", __func__);
-		/* FIXME something to prod here? */
-	} else {
-		pr_debug("%s: off\n", __func__);
-		/* FIXME something to prod here? */
+		if (ctrl & NAND_ALE)
+			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+		else
+			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
+
+		__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
 	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
 }
 
-static struct pxamci_platform_data balloon3_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.setpower 	= balloon3_mci_setpower,
-};
+static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	if (chip < 0 || chip > 3)
+		return;
 
-static int balloon3_udc_is_connected(void)
+	balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
+			BALLOON3_NAND_CONTROL_FLCE1 |
+			BALLOON3_NAND_CONTROL_FLCE2 |
+			BALLOON3_NAND_CONTROL_FLCE3;
+
+	/* Deassert correct nCE line */
+	balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+
+	__raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+}
+
+static int balloon3_nand_probe(struct platform_device *pdev)
 {
-	pr_debug("%s: udc connected\n", __func__);
-	return 1;
+	void __iomem *temp_map;
+	uint16_t ver;
+	int ret;
+
+	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+
+	ver = __raw_readw(BALLOON3_FPGA_VER);
+	if (ver > 0x0201)
+		pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+			"NAND support might be broken in this version!", ver);
+
+	/* Power up the NAND chips */
+	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
+	if (ret)
+		goto err1;
+
+	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
+	if (ret)
+		goto err2;
+
+	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
+
+	/* Deassert all nCE lines and write protect line */
+	__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+	return 0;
+
+err2:
+	gpio_free(BALLOON3_GPIO_RUN_NAND);
+err1:
+	return ret;
 }
 
-static void balloon3_udc_command(int cmd)
+static void balloon3_nand_remove(struct platform_device *pdev)
 {
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
-		pr_debug("%s: connect\n", __func__);
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~UP2OCR_DPPUE;
-		pr_debug("%s: disconnect\n", __func__);
-		break;
-	}
+	/* Power down the NAND chips */
+	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
+	gpio_free(BALLOON3_GPIO_RUN_NAND);
 }
 
-static struct pxa2xx_udc_mach_info balloon3_udc_info = {
-	.udc_is_connected = balloon3_udc_is_connected,
-	.udc_command      = balloon3_udc_command,
+static struct mtd_partition balloon3_partition_info[] = {
+	[0] = {
+		.name	= "Boot",
+		.offset	= 0,
+		.size	= SZ_4M,
+	},
+	[1] = {
+		.name	= "RootFS",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
 };
 
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-};
+static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
 
-static unsigned long balloon3_ohci_pin_config[] = {
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
+struct platform_nand_data balloon3_nand_pdata = {
+	.chip = {
+		.nr_chips	= 4,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
+		.partitions	= balloon3_partition_info,
+		.chip_delay	= 50,
+		.part_probe_types = balloon3_part_probes,
+	},
+	.ctrl = {
+		.hwcontrol	= 0,
+		.dev_ready	= 0,
+		.select_chip	= balloon3_nand_select_chip,
+		.cmd_ctrl	= balloon3_nand_cmd_ctl,
+		.probe		= balloon3_nand_probe,
+		.remove		= balloon3_nand_remove,
+	},
 };
 
-static struct pxaohci_platform_data balloon3_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+static struct resource balloon3_nand_resource[] = {
+	[0] = {
+		.start = BALLOON3_NAND_BASE,
+		.end   = BALLOON3_NAND_BASE + 0x4,
+		.flags = IORESOURCE_MEM,
+	},
 };
 
-static unsigned long balloon3_pin_config[] __initdata = {
-	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Wakeup GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* NAND & IDLE LED GPIOs */
-	GPIO9_GPIO,
-	GPIO10_GPIO,
+static struct platform_device balloon3_nand = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
+	.resource	= balloon3_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &balloon3_nand_pdata,
+	}
 };
 
-static struct gpio_led balloon3_gpio_leds[] = {
+static void __init balloon3_nand_init(void)
+{
+	platform_device_register(&balloon3_nand);
+}
+#else
+static inline void balloon3_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
 	{
-		.name			= "balloon3:green:idle",
-		.default_trigger	= "heartbeat",
-		.gpio			= BALLOON3_GPIO_LED_IDLE,
-		.active_low		= 1,
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data balloon3_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
 	},
+	.consumer_supplies	= balloon3_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
+};
+
+static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
 	{
-		.name			= "balloon3:green:nand",
-		.default_trigger	= "nand-disk",
-		.gpio			= BALLOON3_GPIO_LED_NAND,
-		.active_low		= 1,
-	},
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &balloon3_max1587a_v3_info,
+	}
 };
 
-static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
-	.leds		= balloon3_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+static struct max1586_platform_data balloon3_max1587a_info = {
+	.subdevs     = balloon3_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
 };
 
-static struct platform_device balloon3led_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &balloon3_gpio_leds_platform_data,
+static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &balloon3_max1587a_info,
 	},
 };
 
-static void __init balloon3_init(void)
+static void __init balloon3_pmic_init(void)
 {
-	pr_info("Initialising Balloon3\n");
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
+}
+#else
+static inline void balloon3_pmic_init(void) {}
+#endif
 
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init balloon3_init(void)
+{
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	pxa_set_i2c_info(NULL);
-	if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
-		pxa_set_ac97_info(NULL);
-	}
-
-	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
-		gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
-			"LCD Backlight Power");
-		gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
-		set_pxa_fb_info(&balloon3_pxafb_info);
-	}
-
-	if (balloon3_has(BALLOON3_FEATURE_MMC)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
-		pxa_set_mci_info(&balloon3_mci_platform_data);
-	}
-	pxa_set_ficp_info(&balloon3_ficp_platform_data);
-	if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
-		pxa_set_ohci_info(&balloon3_ohci_platform_data);
-	}
-	pxa_set_udc_info(&balloon3_udc_info);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
-	platform_device_register(&balloon3led_device);
+	balloon3_i2c_init();
+	balloon3_irda_init();
+	balloon3_lcd_init();
+	balloon3_leds_init();
+	balloon3_mmc_init();
+	balloon3_nand_init();
+	balloon3_nor_init();
+	balloon3_pmic_init();
+	balloon3_ts_init();
+	balloon3_udc_init();
+	balloon3_uhc_init();
 }
 
 static struct map_desc balloon3_io_desc[] __initdata = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index fdda6be6c391..c70e6c2f4e7c 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -689,6 +689,7 @@ static void __init cm_x300_init_da9030(void)
 {
 	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
 	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+	set_irq_wake(IRQ_WAKEUP0, 1);
 }
 
 static void __init cm_x300_init_wi2wi(void)
@@ -745,9 +746,10 @@ static void __init cm_x300_init(void)
 {
 	cm_x300_init_mfp();
 
-	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
+	if (cpu_is_pxa300())
+		pxa_set_ffuart_info(NULL);
 
 	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
new file mode 100644
index 000000000000..0f3b632c3b14
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ *
+ *  Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_COLIBRI_PXA270_SD_DETECT,
+	.gpio_card_ro		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init colibri_pxa270_mmc_init(void)
+{
+	pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+}
+#else
+static inline void colibri_pxa270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_pxa270_ohci_init(struct device *dev)
+{
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+	return 0;
+}
+
+static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.init		= colibri_pxa270_ohci_init,
+};
+
+static void __init colibri_pxa270_uhc_init(void)
+{
+	pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+}
+#else
+static inline void colibri_pxa270_uhc_init(void) {}
+#endif
+
+void __init colibri_pxa270_evalboard_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	colibri_pxa270_mmc_init();
+	colibri_pxa270_uhc_init();
+}
+
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
new file mode 100644
index 000000000000..37f0f3ed7c61
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -0,0 +1,272 @@
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Pavel Revak <palo@bielyvlk.sk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/sysdev.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/pxafb.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO114_INCOME_ETH_IRQ  (114)
+#define GPIO0_INCOME_SD_DETECT  (0)
+#define GPIO0_INCOME_SD_RO      (1)
+#define GPIO54_INCOME_LED_A     (54)
+#define GPIO55_INCOME_LED_B     (55)
+#define GPIO113_INCOME_TS_IRQ   (113)
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t income_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+	GPIO1_GPIO,	/* SD read-only */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* BFUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* LED */
+	GPIO54_GPIO,	/* LED A */
+	GPIO55_GPIO,	/* LED B */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
+	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
+	.detect_delay_ms	= 200,
+};
+
+static void __init income_mmc_init(void)
+{
+	pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+	pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+	{
+		.name			= "income:green:leda",
+		.default_trigger	= "none",
+		.gpio			= GPIO54_INCOME_LED_A,
+		.active_low		= 1,
+	},
+	{
+		.name			= "income:green:ledb",
+		.default_trigger	= "none",
+		.gpio			= GPIO55_INCOME_LED_B,
+		.active_low		= 1,
+	}
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+	.leds		= income_gpio_leds,
+	.num_leds	= ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &income_gpio_led_info,
+	}
+};
+
+static void __init income_led_init(void)
+{
+	platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("ds1340", 0x68),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4f),
+	},
+};
+
+static void __init income_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+	.pixclock	= 144700,
+	.xres		= 320,
+	.yres		= 240,
+	.bpp		= 32,
+	.depth		= 18,
+
+	.left_margin	= 10,
+	.right_margin	= 10,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 20,
+	.vsync_len	= 2,
+
+	.sync		= FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+	.modes		= income_lcd_modes,
+	.num_modes	= ARRAY_SIZE(income_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+	set_pxa_fb_info(&income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+static struct platform_pwm_backlight_data income_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 0x3ff,
+	.dft_brightness	= 0x1ff,
+	.pwm_period_ns	= 1000000,
+};
+
+static struct platform_device income_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &income_backlight_data,
+	},
+};
+
+static void __init income_pwm_init(void)
+{
+	platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+void __init colibri_pxa270_income_boardinit(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	income_mmc_init();
+	income_uhc_init();
+	income_led_init();
+	income_i2c_init();
+	income_lcd_init();
+	income_pwm_init();
+}
+
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 061c45316de8..98673ac6efd0 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -3,6 +3,7 @@
  *
  *  Support for Toradex PXA270 based Colibri module
  *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
@@ -10,49 +11,55 @@
  */
 
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
+#include <linux/kernel.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/ucb1400.h>
+
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
 
-#include <mach/pxa27x.h>
+#include <mach/audio.h>
 #include <mach/colibri.h>
+#include <mach/pxa27x.h>
 
-#include "generic.h"
 #include "devices.h"
+#include "generic.h"
 
-/*
- * GPIO configuration
- */
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
 static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+	/* Ethernet */
 	GPIO78_nCS_2,	/* Ethernet CS */
 	GPIO114_GPIO,	/* Ethernet IRQ */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* Touchscreen IRQ */
 };
 
-/*
- * NOR flash
- */
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition colibri_partitions[] = {
 	{
 		.name =		"Bootloader",
 		.offset =	0x00000000,
 		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+		.mask_flags =	MTD_WRITEABLE	/* force read-only */
 	}, {
 		.name =		"Kernel",
 		.offset =	0x00040000,
@@ -90,50 +97,113 @@ static struct platform_device colibri_pxa270_flash_device = {
 	.num_resources = 1,
 };
 
-/*
- * DM9000 Ethernet
- */
-#if defined(CONFIG_DM9000)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= COLIBRI_PXA270_ETH_PHYS,
-		.end	= COLIBRI_PXA270_ETH_PHYS + 3,
+static void __init colibri_pxa270_nor_init(void)
+{
+	platform_device_register(&colibri_pxa270_flash_device);
+}
+#else
+static inline void colibri_pxa270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource colibri_pxa270_dm9000_resources[] = {
+	{
+		.start	= PXA_CS2_PHYS,
+		.end	= PXA_CS2_PHYS + 3,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= COLIBRI_PXA270_ETH_PHYS + 4,
-		.end	= COLIBRI_PXA270_ETH_PHYS + 4 + 500,
+	{
+		.start	= PXA_CS2_PHYS + 4,
+		.end	= PXA_CS2_PHYS + 4 + 500,
 		.flags	= IORESOURCE_MEM,
 	},
-	[2] = {
-		.start	= COLIBRI_PXA270_ETH_IRQ,
-		.end	= COLIBRI_PXA270_ETH_IRQ,
+	{
+		.start	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.end	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
 
-static struct platform_device dm9000_device = {
+static struct platform_device colibri_pxa270_dm9000_device = {
 	.name		= "dm9000",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
+	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
+	.resource	= colibri_pxa270_dm9000_resources,
 };
-#endif /* CONFIG_DM9000 */
 
-static struct platform_device *colibri_pxa270_devices[] __initdata = {
-	&colibri_pxa270_flash_device,
-#if defined(CONFIG_DM9000)
-	&dm9000_device,
+static void __init colibri_pxa270_eth_init(void)
+{
+	platform_device_register(&colibri_pxa270_dm9000_device);
+}
+#else
+static inline void colibri_pxa270_eth_init(void) {}
 #endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
+	.irq		= gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+};
+
+static struct platform_device colibri_pxa270_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &colibri_pxa270_ucb1400_pdata,
+	},
 };
 
+static void __init colibri_pxa270_tsc_init(void)
+{
+	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
+	platform_device_register(&colibri_pxa270_ucb1400_device);
+}
+#else
+static inline void colibri_pxa270_tsc_init(void) {}
+#endif
+
+static int colibri_pxa270_baseboard;
+core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
+
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
+
+	colibri_pxa270_nor_init();
+	colibri_pxa270_eth_init();
+	colibri_pxa270_tsc_init();
+
+	switch (colibri_pxa270_baseboard) {
+	case COLIBRI_PXA270_EVALBOARD:
+		colibri_pxa270_evalboard_init();
+		break;
+	case COLIBRI_PXA270_INCOME:
+		colibri_pxa270_income_boardinit();
+		break;
+	default:
+		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
+				colibri_pxa270_baseboard);
+	}
+}
+
+/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
+ * with the INCOME mach type or with COLIBRI and the kernel parameter
+ * "colibri_pxa270_baseboard=1"
+ */
+static void __init colibri_pxa270_income_init(void)
+{
+	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
+	colibri_pxa270_init();
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
@@ -146,3 +216,13 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.timer		= &pxa_timer,
 MACHINE_END
 
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.init_machine	= colibri_pxa270_income_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ae835fad7d10..99e850d84710 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/sizes.h>
@@ -28,6 +29,8 @@
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/audio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -101,6 +104,42 @@ void __init colibri_pxa320_init_ohci(void)
 static inline void colibri_pxa320_init_ohci(void) {}
 #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
 
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
+	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
+	.gpio_pullup		= -1,
+};
+
+static struct platform_device colibri_pxa320_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &colibri_pxa320_gpio_vbus_info,
+	},
+};
+
+static void colibri_pxa320_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
+	.udc_command		= colibri_pxa320_udc_command,
+	.gpio_pullup		= -1,
+};
+
+static void __init colibri_pxa320_init_udc(void)
+{
+	pxa_set_udc_info(&colibri_pxa320_udc_info);
+	platform_device_register(&colibri_pxa320_gpio_vbus);
+}
+#else
+static inline void colibri_pxa320_init_udc(void) {}
+#endif
+
 static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
 	GPIO22_MMC1_CLK,
 	GPIO23_MMC1_CMD,
@@ -212,6 +251,7 @@ void __init colibri_pxa320_init(void)
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
 	colibri_pxa320_init_uart();
+	colibri_pxa320_init_udc();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 461ba4080155..3fb0fc099080 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -50,14 +50,13 @@
 #include <mach/udc.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/corgi.h>
-#include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
 #include "generic.h"
 #include "devices.h"
-#include "sharpsl.h"
 
 static unsigned long corgi_pin_config[] __initdata = {
 	/* Static Memory I/O */
@@ -185,8 +184,6 @@ static struct scoop_pcmcia_config corgi_pcmcia_config = {
 	.num_devs     = 1,
 };
 
-EXPORT_SYMBOL(corgiscoop_device);
-
 static struct w100_mem_info corgi_fb_mem = {
 	.ext_cntl          = 0x00040003,
 	.sdram_mode_reg    = 0x00650021,
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 3f1dc74ac048..29034778bfda 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -23,12 +23,11 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
-#include <mach/sharpsl.h>
 #include <mach/corgi.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl_pm.h>
 
 #include "generic.h"
-#include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
 #define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
@@ -134,11 +133,11 @@ unsigned long corgipm_read_devdata(int type)
 	case SHARPSL_STATUS_ACIN:
 		return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
 	case SHARPSL_STATUS_LOCK:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
 	case SHARPSL_STATUS_CHRGFULL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
 	case SHARPSL_STATUS_FATAL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
 	case SHARPSL_ACIN_VOLT:
 		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
 	case SHARPSL_BATT_TEMP:
@@ -165,8 +164,6 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.should_wakeup   = corgi_should_wakeup,
 #if defined(CONFIG_LCD_CORGI)
 	.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
-	.backlight_limit = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 8e10db148f1b..65447dc736c2 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,6 +4,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
+#include <asm/pmu.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
@@ -31,6 +32,19 @@ void __init pxa_register_device(struct platform_device *dev, void *data)
 		dev_err(&dev->dev, "unable to register device: %d\n", ret);
 }
 
+static struct resource pxa_resource_pmu = {
+	.start	= IRQ_PMU,
+	.end	= IRQ_PMU,
+	.flags	= IORESOURCE_IRQ,
+};
+
+struct platform_device pxa_device_pmu = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pxa_resource_pmu,
+	.num_resources	= 1,
+};
+
 static struct resource pxamci_resources[] = {
 	[0] = {
 		.start	= 0x41100000,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 93817d99761e..50353ea49ba4 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,3 +1,4 @@
+extern struct platform_device pxa_device_pmu;
 extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
deleted file mode 100644
index 8fde3387279d..000000000000
--- a/arch/arm/mach-pxa/e330.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Hardware definitions for the Toshiba e330 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-	.enable   = &eseries_tmio_enable,
-	.disable  = &eseries_tmio_disable,
-	.suspend  = &eseries_tmio_suspend,
-	.resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-	.name           = "tc6387xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e330_tc6387xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e330_tc6387xb_device,
-};
-
-static void __init e330_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e330_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
deleted file mode 100644
index f50f055f5720..000000000000
--- a/arch/arm/mach-pxa/e350.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Hardware definitions for the Toshiba e350 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-	.irq_base               = IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e350_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e350_t7l66xb_device,
-};
-
-static void __init e350_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e350_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
deleted file mode 100644
index 55b950f12844..000000000000
--- a/arch/arm/mach-pxa/e400.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/pxafb.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e400_t7l66xb_device,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	set_pxa_fb_info(&e400_pxafb_mach_info);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
deleted file mode 100644
index d578021d1a10..000000000000
--- a/arch/arm/mach-pxa/e740.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/clk.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-#include "devices.h"
-
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
deleted file mode 100644
index af83caa52dd4..000000000000
--- a/arch/arm/mach-pxa/e750.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO11_3_6MHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e750_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e750_fb_device,
-	&e750_tc6393xb_device,
-};
-
-static void __init e750_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e750_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
deleted file mode 100644
index 8ea97bf53fe1..000000000000
--- a/arch/arm/mach-pxa/e800.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
-		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
-	.gpio_vbus   = GPIO_E800_USB_DISC,
-	.gpio_pullup = GPIO_E800_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e800_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e800_fb_device,
-	&e800_tc6393xb_device,
-};
-
-static void __init e800_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e800_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e800_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index a0ab3082a000..349212a1cbd3 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -15,6 +15,13 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <video/w100fb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -22,9 +29,12 @@
 
 #include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
 
+#include "devices.h"
 #include "generic.h"
 #include "clock.h"
 
@@ -130,3 +140,802 @@ void eseries_register_clks(void)
 	clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
 }
 
+#ifdef CONFIG_MACH_E330
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+	.enable   = &eseries_tmio_enable,
+	.disable  = &eseries_tmio_disable,
+	.suspend  = &eseries_tmio_suspend,
+	.resume   = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+	.name           = "tc6387xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e330_tc6387xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *e330_devices[] __initdata = {
+	&e330_tc6387xb_device,
+};
+
+static void __init e330_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e330_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+	.irq_base               = IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e350_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e350_devices[] __initdata = {
+	&e350_t7l66xb_device,
+};
+
+static void __init e350_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e350_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static struct mtd_partition partition_a = {
+	.name = "Internal NAND flash",
+	.offset =  0,
+	.size =  MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+	.num_partitions = 1,
+	.partition = &partition_a,
+	.badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+
+	.nand_data              = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e400_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e400_devices[] __initdata = {
+	&e400_t7l66xb_device,
+};
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	/* Fixme - e400 may have a switched clock */
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+	GPIO40_GPIO,  /* Mic amp power */
+	GPIO41_GPIO,  /* Headphone amp power */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e740_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e740_devices[] __initdata = {
+	&e740_fb_device,
+	&e740_t7l66xb_device,
+};
+
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
+			"UDCCLK", &pxa25x_device_udc.dev),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO11_3_6MHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO4_GPIO,  /* Headphone amp power */
+	GPIO7_GPIO,  /* Speaker amp power */
+	GPIO37_GPIO, /* Headphone detect */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e750_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ------------------------------------------------------------- */
+
+static struct platform_device *e750_devices[] __initdata = {
+	&e750_fb_device,
+	&e750_tc6393xb_device,
+};
+
+static void __init e750_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e750_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static unsigned long e800_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+};
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
+		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e800_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e800_devices[] __initdata = {
+	&e800_fb_device,
+	&e800_tc6393xb_device,
+};
+
+static void __init e800_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
+	pxa_set_udc_info(&e800_udc_mach_info);
+	pxa_set_ac97_info(NULL);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e800_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
deleted file mode 100644
index 5161dca8ccc0..000000000000
--- a/arch/arm/mach-pxa/imote2.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/imote2.c
- *
- * Author:	Ed C. Epp
- * Created:	Nov 05, 2002
- * Copyright:	Intel Corp.
- *
- * Modified 2008:  Jonathan Cameron
- *
- * The Imote2 is a wireless sensor node platform sold
- * by Crossbow (www.xbow.com).
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/mfd/da903x.h>
-#include <linux/sht15.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <plat/i2c.h>
-#include <mach/udc.h>
-#include <mach/mmc.h>
-#include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x-udc.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long imote2_pin_config[] __initdata = {
-
-	/* Device Identification for wakeup*/
-	GPIO102_GPIO,
-
-	/* Button */
-	GPIO91_GPIO,
-
-	/* DA9030 */
-	GPIO1_GPIO,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* 802.15.4 radio - driver out of mainline */
-	GPIO22_GPIO,			/* CC_RSTN */
-	GPIO114_GPIO,			/* CC_FIFO */
-	GPIO116_GPIO,			/* CC_CCA */
-	GPIO0_GPIO,			/* CC_FIFOP */
-	GPIO16_GPIO,			/* CCSFD */
-	GPIO115_GPIO,			/* Power enable */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO,			/* Chip Select */
-	GPIO34_SSP3_SCLK,
-	GPIO35_SSP3_TXD,
-	GPIO41_SSP3_RXD,
-
-	/* SSP 2 - to daughter boards */
-	GPIO37_GPIO,			/* Chip Select */
-	GPIO36_SSP2_SCLK,
-	GPIO38_SSP2_TXD,
-	GPIO11_SSP2_RXD,
-
-	/* SSP 1 - to daughter boards */
-	GPIO24_GPIO,			/* Chip Select */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* BTUART Basic Connector*/
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART Serial console via debug board*/
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* SHT15 */
-	GPIO100_GPIO,
-	GPIO98_GPIO,
-
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-
-	/* LEDS */
-	GPIO103_GPIO, /* red led */
-	GPIO104_GPIO, /* green led */
-	GPIO105_GPIO, /* blue led */
-};
-
-static struct sht15_platform_data platform_data_sht15 = {
-	.gpio_data =  100,
-	.gpio_sck  =  98,
-};
-
-static struct platform_device sht15 = {
-	.name = "sht15",
-	.id = -1,
-	.dev = {
-		.platform_data = &platform_data_sht15,
-	},
-};
-
-static struct regulator_consumer_supply imote2_sensor_3_con[] = {
-	{
-		.dev = &sht15.dev,
-		.supply = "vcc",
-	},
-};
-
-static struct gpio_led imote2_led_pins[] = {
-	{
-		.name       =  "imote2:red",
-		.gpio       = 103,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:green",
-		.gpio       = 104,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:blue",
-		.gpio       = 105,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
-	.num_leds = ARRAY_SIZE(imote2_led_pins),
-	.leds     = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data = &imote2_led_data,
-	},
-};
-
-/* Reverse engineered partly from Platformx drivers */
-enum imote2_ldos{
-	vcc_vref,
-	vcc_cc2420,
-	vcc_mica,
-	vcc_bt,
-	/* The two voltages available to sensor boards */
-	vcc_sensor_1_8,
-	vcc_sensor_3,
-
-	vcc_sram_ext, /* directly connected to the pxa271 */
-	vcc_pxa_pll,
-	vcc_pxa_usim, /* Reference voltage for certain gpios */
-	vcc_pxa_mem,
-	vcc_pxa_flash,
-	vcc_pxa_core, /*Dc-Dc buck not yet supported */
-	vcc_lcd,
-	vcc_bb,
-	vcc_bbio,
-	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo.  Unfortunately this information is
- * not generally available.  More information has been requested from Xbow
- * but as of yet they haven't been forthcoming.
- *
- * Some of these are clearly Stargate 2 related (no way of plugging
- * in an lcd on the IM2 for example!).
- */
-static struct regulator_init_data imote2_ldo_init_data[] = {
-	[vcc_bbio] = {
-		.constraints = { /* board default 1.8V */
-			.name = "vcc_bbio",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_bb] = {
-		.constraints = { /* board default 2.8V */
-			.name = "vcc_bb",
-			.min_uV = 2700000,
-			.max_uV = 3000000,
-		},
-	},
-	[vcc_pxa_flash] = {
-		.constraints = {/* default is 1.8V */
-			.name = "vcc_pxa_flash",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_cc2420] = { /* also vcc_io */
-		.constraints = {
-			/* board default is 2.8V */
-			.name = "vcc_cc2420",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_vref] = { /* Reference for what? */
-		.constraints = { /* default 1.8V */
-			.name = "vcc_vref",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sram_ext] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_sram_ext",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_mica] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_mica",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_bt] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_bt",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_lcd] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_lcd",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_io] = { /* Same or higher than everything
-			  * bar vccbat and vccusb */
-		.constraints = { /* default 2.8V */
-			.name = "vcc_io",
-			.min_uV = 2692000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_sensor_1_8] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_sensor_1_8",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sensor_3] = { /* curiously default 2.8V */
-		.constraints = {
-			.name = "vcc_sensor_3",
-			.min_uV = 2800000,
-			.max_uV = 3000000,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
-		.consumer_supplies = imote2_sensor_3_con,
-	},
-	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
-		.constraints = {
-			.name = "vcc_pxa_pll",
-			.min_uV = 1170000,
-			.max_uV = 1430000,
-		},
-	},
-	[vcc_pxa_usim] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_usim",
-			.min_uV = 1710000,
-			.max_uV = 2160000,
-		},
-	},
-	[vcc_pxa_mem] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_mem",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &imote2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &imote2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &imote2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &imote2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &imote2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &imote2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &imote2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &imote2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &imote2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &imote2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO18,
-		.platform_data = &imote2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
-	.subdevs = imote2_da9030_subdevs,
-};
-
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
-	return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
-	.get_ro = imote2_mci_get_ro,
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
-	.gpio_power = -1,
-};
-
-static struct mtd_partition imote2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0,
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0,
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data imote2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = imote2flash_partitions,
-	.nr_parts = ARRAY_SIZE(imote2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device imote2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &imote2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
-
-/* Some of the drivers here are out of kernel at the moment (parts of IIO)
- * and it may be a while before they are in the mainline.
- */
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
-	{ /* UCAM sensor board */
-		.type = "max1239",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = IRQ_GPIO(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = IRQ_GPIO(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = IRQ_GPIO(96),
-	}, { /* IMB400 Multimedia board */
-		.type = "wm8940",
-		.addr = 0x1A,
-	},
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &imote2_da9030_pdata,
-		.irq = gpio_to_irq(1),
-	},
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{ /* Driver in IIO */
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = IRQ_GPIO(96),
-	}, { /* Driver out of kernel as it needs considerable rewriting */
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void im2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
-	.udc_command		= im2_udc_command,
-};
-
-static struct platform_device *imote2_devices[] = {
-	&imote2_flash_device,
-	&imote2_leds,
-	&sht15,
-};
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static void __init imote2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	i2c_register_board_info(0, imote2_i2c_board_info,
-				ARRAY_SIZE(imote2_i2c_board_info));
-	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
-				ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
-
-	pxa_set_mci_info(&imote2_mci_platform_data);
-	pxa_set_udc_info(&imote2_udc_info);
-}
-
-MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa27x_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= imote2_init,
-	.boot_params	= 0xA0000100,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 1a741065045f..eec92e6fd7cf 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -26,21 +26,55 @@ enum balloon3_features {
 #define BALLOON3_FPGA_VIRT	(0xf1000000)	/* as per balloon2 */
 #define BALLOON3_FPGA_LENGTH	0x01000000
 
-/* FPGA/CPLD registers */
-#define BALLOON3_PCMCIA0_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-/* fixme - same for now */
-#define BALLOON3_PCMCIA1_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-#define BALLOON3_NANDIO_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+/* FPGA / CPLD registers for CF socket */
+#define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+#define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+/* FPGA / CPLD version register */
+#define	BALLOON3_FPGA_VER		(BALLOON3_FPGA_VIRT + 0x00e0001c)
+/* FPGA / CPLD registers for NAND flash */
+#define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
+#define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+#define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
+
 /* fpga/cpld interrupt control register */
 #define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_NANDIO_CTL2_REG 	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define BALLOON3_NANDIO_CTL_REG 	(BALLOON3_FPGA_VIRT + 0x00e00014)
 #define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
 
 #define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
 #define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
 #define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
 
+/* CF Status Register bits (read-only) bits */
+#define BALLOON3_CF_nIRQ		(1 << 0)
+#define BALLOON3_CF_nSTSCHG_BVD1	(1 << 1)
+
+/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
+#define BALLOON3_CF_RESET		(1 << 0)
+#define BALLOON3_CF_ENABLE		(1 << 1)
+#define BALLOON3_CF_ADD_ENABLE		(1 << 2)
+
+/* CF Interrupt sources */
+#define BALLOON3_BP_CF_NRDY_IRQ		BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ		BALLOON3_IRQ(1)
+
+/* NAND Control register */
+#define	BALLOON3_NAND_CONTROL_FLWP	(1 << 7)
+#define	BALLOON3_NAND_CONTROL_FLSE	(1 << 6)
+#define	BALLOON3_NAND_CONTROL_FLCE3	(1 << 5)
+#define	BALLOON3_NAND_CONTROL_FLCE2	(1 << 4)
+#define	BALLOON3_NAND_CONTROL_FLCE1	(1 << 3)
+#define	BALLOON3_NAND_CONTROL_FLCE0	(1 << 2)
+#define	BALLOON3_NAND_CONTROL_FLALE	(1 << 1)
+#define	BALLOON3_NAND_CONTROL_FLCLE	(1 << 0)
+
+/* NAND Status register */
+#define	BALLOON3_NAND_STAT_RNB		(1 << 0)
+
+/* NAND Control2 register */
+#define	BALLOON3_NAND_CONTROL2_16BIT	(1 << 0)
+
 /* GPIOs for irqs */
 #define BALLOON3_GPIO_AUX_NIRQ		(94)
 #define BALLOON3_GPIO_CODEC_IRQ		(95)
@@ -54,20 +88,24 @@ enum balloon3_features {
 
 #define BALLOON3_GPIO_S0_CD		(105)
 
+/* NAND */
+#define BALLOON3_GPIO_RUN_NAND		(102)
+
+/* PCF8574A Leds */
+#define	BALLOON3_PCF_GPIO_BASE		160
+#define	BALLOON3_PCF_GPIO_LED0		(BALLOON3_PCF_GPIO_BASE + 0)
+#define	BALLOON3_PCF_GPIO_LED1		(BALLOON3_PCF_GPIO_BASE + 1)
+#define	BALLOON3_PCF_GPIO_LED2		(BALLOON3_PCF_GPIO_BASE + 2)
+#define	BALLOON3_PCF_GPIO_LED3		(BALLOON3_PCF_GPIO_BASE + 3)
+#define	BALLOON3_PCF_GPIO_LED4		(BALLOON3_PCF_GPIO_BASE + 4)
+#define	BALLOON3_PCF_GPIO_LED5		(BALLOON3_PCF_GPIO_BASE + 5)
+#define	BALLOON3_PCF_GPIO_LED6		(BALLOON3_PCF_GPIO_BASE + 6)
+#define	BALLOON3_PCF_GPIO_LED7		(BALLOON3_PCF_GPIO_BASE + 7)
+
 /* FPGA Interrupt Mask/Acknowledge Register */
 #define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
 #define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
 
-/* CF Status Register */
-#define BALLOON3_PCMCIA_nIRQ		(1 << 0)  /* IRQ / ready signal */
-#define BALLOON3_PCMCIA_nSTSCHG_BVD1	(1 << 1)
-					/* VDD sense / card status changed */
-
-/* CF control register (write) */
-#define BALLOON3_PCMCIA_RESET		(1 << 0)   /* Card reset signal */
-#define BALLOON3_PCMCIA_ENABLE		(1 << 1)
-#define BALLOON3_PCMCIA_ADD_ENABLE	(1 << 2)
-
 /* CPLD (and FPGA) interface definitions */
 #define CPLD_LCD0_DATA_SET             0x00
 #define CPLD_LCD0_DATA_CLR             0x10
@@ -132,9 +170,6 @@ enum balloon3_features {
 /* Balloon3 Interrupts */
 #define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
 
-#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
-
 #define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
 #define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
 #define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 5f2ba8d9015c..58dada11054f 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -5,6 +5,27 @@
 #include <mach/mfp.h>
 
 /*
+ * base board glue for PXA270 module
+ */
+
+enum {
+	COLIBRI_PXA270_EVALBOARD = 0,
+	COLIBRI_PXA270_INCOME,
+};
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
+extern void colibri_pxa270_evalboard_init(void);
+#else
+static inline void colibri_pxa270_evalboard_init(void) {}
+#endif
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
+extern void colibri_pxa270_income_boardinit(void);
+#else
+static inline void colibri_pxa270_income_boardinit(void) {}
+#endif
+
+/*
  * common settings for all modules
  */
 
@@ -33,13 +54,10 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-/* definitions for Colibri PXA270 */
-
-#define COLIBRI_PXA270_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define COLIBRI_PXA270_ETH_PHYS		(PXA_CS2_PHYS)  /* Ethernet */
-#define COLIBRI_PXA270_ETH_IRQ_GPIO	114
-#define COLIBRI_PXA270_ETH_IRQ		\
-	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
+/* GPIO definitions for Colibri PXA270 */
+#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
+#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
 
 #endif /* _COLIBRI_H_ */
 
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 585970ef08ce..0011055bc3f9 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -109,10 +109,5 @@
 #define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
 #define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
 
-/*
- * Shared data structures
- */
-extern struct platform_device corgiscoop_device;
-
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 06abd4160607..9b898680b206 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -14,25 +14,15 @@
 
 /*
 GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the original gumstix,
-this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+interrupt signal for determining cable presence. On the gumstix F,
 this moves to GPIO17 and GPIO37. */
 
 /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
 has detected a cable insertion; driven low otherwise. */
 
-#ifdef CONFIG_ARCH_GUMSTIX_ORIG
-
-#define GPIO_GUMSTIX_USB_GPIOn		81
-#define GPIO_GUMSTIX_USB_GPIOx		83
-
-#else
-
 #define GPIO_GUMSTIX_USB_GPIOn		35
 #define GPIO_GUMSTIX_USB_GPIOx		41
 
-#endif
-
 /* usb state change */
 #define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
 
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
new file mode 100644
index 000000000000..0a5e5eadebf5
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -0,0 +1,81 @@
+/*
+ * Common functions for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef	__INCLUDE_MACH_PALM27X__
+#define	__INCLUDE_MACH_PALM27X__
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void __init palm27x_mmc_init(int detect, int ro, int power,
+					int power_inverted);
+#else
+static inline void palm27x_mmc_init(int detect, int ro, int power,
+					int power_inverted)
+{}
+#endif
+
+#if defined(CONFIG_SUSPEND)
+extern void __init palm27x_pm_init(unsigned long str_base);
+#else
+static inline void palm27x_pm_init(unsigned long str_base) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern struct pxafb_mode_info palm_320x480_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
+extern void __init palm27x_lcd_init(int power,
+					struct pxafb_mode_info *mode);
+#else
+static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
+#endif
+
+#if	defined(CONFIG_USB_GADGET_PXA27X) || \
+	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+extern void __init palm27x_udc_init(int vbus, int pullup,
+					int vbus_inverted);
+#else
+static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
+#endif
+
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+extern void __init palm27x_irda_init(int pwdn);
+#else
+static inline void palm27x_irda_init(int pwdn) {}
+#endif
+
+#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
+					int reset);
+#else
+static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
+#endif
+
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+extern void __init palm27x_pwm_init(int bl, int lcd);
+#else
+static inline void palm27x_pwm_init(int bl, int lcd) {}
+#endif
+
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+extern void __init palm27x_power_init(int ac, int usb);
+#else
+static inline void palm27x_power_init(int ac, int usb) {}
+#endif
+
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+extern void __init palm27x_pmic_init(void);
+#else
+static inline void palm27x_pmic_init(void) {}
+#endif
+
+#endif	/* __INCLUDE_MACH_PALM27X__ */
diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h b/arch/arm/mach-pxa/include/mach/pata_pxa.h
new file mode 100644
index 000000000000..6cf7df1d5830
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pata_pxa.h
@@ -0,0 +1,33 @@
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef	__MACH_PATA_PXA_H__
+#define	__MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+	/* PXA DMA DREQ<0:2> pin */
+	uint32_t	dma_dreq;
+	/* Register shift */
+	uint32_t	reg_shift;
+	/* IRQ flags */
+	uint32_t	irq_flags;
+};
+
+#endif	/* __MACH_PATA_PXA_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
deleted file mode 100644
index 8242e14a44fa..000000000000
--- a/arch/arm/mach-pxa/include/mach/sharpsl.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * SharpSL SSP Driver
- */
-
-unsigned long corgi_ssp_ads7846_putget(unsigned long);
-unsigned long corgi_ssp_ads7846_get(void);
-void corgi_ssp_ads7846_put(unsigned long data);
-void corgi_ssp_ads7846_lock(void);
-void corgi_ssp_ads7846_unlock(void);
-void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
-void corgi_ssp_blduty_set(int duty);
-int corgi_ssp_max1111_get(unsigned long data);
-
-/*
- * SharpSL Touchscreen Driver
- */
-
-struct corgits_machinfo {
-	unsigned long (*get_hsync_invperiod)(void);
-	void (*put_hsync)(void);
-	void (*wait_hsync)(void);
-};
-
-
-/*
- * SharpSL Backlight
- */
-extern void corgibl_limit_intensity(int limit);
-extern void corgi_lcd_limit_intensity(int limit);
-
-
-/*
- * SharpSL Battery/PM Driver
- */
-extern void sharpsl_battery_kick(void);
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 1920dc6b05dc..905be6755f04 100644
--- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -93,6 +93,8 @@ struct sharpsl_pm_status {
 
 extern struct sharpsl_pm_status sharpsl_pm;
 
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
 
 #define SHARPSL_LED_ERROR  2
 #define SHARPSL_LED_ON     1
@@ -101,4 +103,11 @@ extern struct sharpsl_pm_status sharpsl_pm;
 void sharpsl_battery_kick(void);
 void sharpsl_pm_led(int val);
 
+/* MAX1111 Channel Definitions */
+#define MAX1111_BATT_VOLT   4u
+#define MAX1111_BATT_TEMP   2u
+#define MAX1111_ACIN_VOLT   6u
+int sharpsl_pm_pxa_read_max1111(int channel);
+
+void corgi_lcd_limit_intensity(int limit);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index fa1998caa78e..685749a51c42 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -185,7 +185,5 @@
 /*
  * Shared data structures
  */
-extern struct platform_device spitzscoop_device;
-extern struct platform_device spitzscoop2_device;
 extern struct platform_device spitzssp_device;
 extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index fa6a708b4099..dc66942ef9ab 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -34,7 +34,7 @@
 #include <linux/irq.h>
 #include <linux/pda_power.h>
 #include <linux/power_supply.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
@@ -636,7 +636,7 @@ static struct platform_device power_dev = {
 	},
 };
 
-static struct wm97xx_batt_info mioa701_battery_data = {
+static struct wm97xx_batt_pdata mioa701_battery_data = {
 	.batt_aux	= WM97XX_AUX_ID1,
 	.temp_aux	= -1,
 	.charge_gpio	= -1,
@@ -648,6 +648,10 @@ static struct wm97xx_batt_info mioa701_battery_data = {
 	.batt_name	= "mioa701_battery",
 };
 
+static struct wm97xx_pdata mioa701_wm97xx_pdata = {
+	.batt_pdata	= &mioa701_battery_data,
+};
+
 /*
  * Voltage regulation
  */
@@ -716,6 +720,7 @@ struct i2c_pxa_platform_data i2c_pdata = {
 
 static pxa2xx_audio_ops_t mioa701_ac97_info = {
 	.reset_gpio = 95,
+	.codec_pdata = { &mioa701_wm97xx_pdata, },
 };
 
 /*
@@ -794,7 +799,6 @@ static void __init mioa701_machine_init(void)
 	set_pxa_fb_info(&mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
-	wm97xx_bat_set_pdata(&mioa701_battery_data);
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
new file mode 100644
index 000000000000..77ad6d34ab5b
--- /dev/null
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -0,0 +1,477 @@
+/*
+ * Common code for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/regulator/max1586.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data palm27x_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.detect_delay_ms	= 200,
+};
+
+void __init palm27x_mmc_init(int detect, int ro, int power,
+					int power_inverted)
+{
+	palm27x_mci_platform_data.gpio_card_detect	= detect;
+	palm27x_mci_platform_data.gpio_card_ro		= ro;
+	palm27x_mci_platform_data.gpio_power		= power;
+	palm27x_mci_platform_data.gpio_power_invert	= power_inverted;
+
+	pxa_set_mci_info(&palm27x_mci_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#if defined(CONFIG_SUSPEND)
+void __init palm27x_pm_init(unsigned long str_base)
+{
+	static const unsigned long resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/*
+	 * Copy the bootloader.
+	 * NOTE: PalmZ72 uses a different wakeup method!
+	 */
+	memcpy(phys_to_virt(str_base), resume, sizeof(resume));
+}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+struct pxafb_mode_info palm_320x480_lcd_mode = {
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+};
+
+struct pxafb_mode_info palm_320x320_lcd_mode = {
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+};
+
+struct pxafb_mode_info palm_320x320_new_lcd_mode = {
+	.pixclock	= 86538,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 20,
+	.right_margin	= 8,
+	.upper_margin	= 8,
+	.lower_margin	= 5,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+};
+
+static struct pxafb_mach_info palm27x_lcd_screen = {
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int palm27x_lcd_power;
+static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(palm27x_lcd_power, on);
+}
+
+void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
+{
+	palm27x_lcd_screen.modes = mode;
+
+	if (gpio_is_valid(power)) {
+		if (!gpio_request(power, "LCD power")) {
+			pr_err("Palm27x: failed to claim lcd power gpio!\n");
+			return;
+		}
+		if (!gpio_direction_output(power, 1)) {
+			pr_err("Palm27x: lcd power configuration failed!\n");
+			return;
+		}
+		palm27x_lcd_power = power;
+		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
+	}
+
+	set_pxa_fb_info(&palm27x_lcd_screen);
+}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if	defined(CONFIG_USB_GADGET_PXA27X) || \
+	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info palm27x_udc_info = {
+	.gpio_vbus_inverted	= 1,
+};
+
+static struct platform_device palm27x_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palm27x_udc_info,
+	},
+};
+
+void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
+{
+	palm27x_udc_info.gpio_vbus	= vbus;
+	palm27x_udc_info.gpio_pullup	= pullup;
+
+	palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
+
+	if (!gpio_request(pullup, "USB Pullup")) {
+		gpio_direction_output(pullup,
+			palm27x_udc_info.gpio_vbus_inverted);
+		gpio_free(pullup);
+	} else
+		return;
+
+	platform_device_register(&palm27x_gpio_vbus);
+}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data palm27x_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+void __init palm27x_irda_init(int pwdn)
+{
+	palm27x_ficp_platform_data.gpio_pwdown = pwdn;
+	pxa_set_ficp_info(&palm27x_ficp_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * WM97xx audio, battery
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+static struct wm97xx_batt_pdata palm27x_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+static struct wm97xx_pdata palm27x_wm97xx_pdata = {
+	.batt_pdata	= &palm27x_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
+	.codec_pdata	= { &palm27x_wm97xx_pdata, },
+};
+
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+	.jack_gpio	= -1,
+};
+
+static struct platform_device palm27x_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palm27x_asoc_pdata,
+	},
+};
+
+void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
+{
+	palm27x_ac97_pdata.reset_gpio	= reset;
+	palm27x_asoc_pdata.jack_gpio	= jack;
+
+	if (minv < 0 || maxv < 0) {
+		palm27x_ac97_pdata.codec_pdata[0] = NULL;
+		pxa_set_ac97_info(&palm27x_ac97_pdata);
+	} else {
+		palm27x_batt_pdata.min_voltage	= minv,
+		palm27x_batt_pdata.max_voltage	= maxv,
+
+		pxa_set_ac97_info(&palm27x_ac97_pdata);
+		platform_device_register(&palm27x_asoc);
+	}
+}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static int palm_bl_power;
+static int palm_lcd_power;
+
+static int palm27x_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(palm_bl_power, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(palm_bl_power, 0);
+	if (ret)
+		goto err2;
+
+	if (gpio_is_valid(palm_lcd_power)) {
+		ret = gpio_request(palm_lcd_power, "LCD POWER");
+		if (ret)
+			goto err2;
+		ret = gpio_direction_output(palm_lcd_power, 0);
+		if (ret)
+			goto err3;
+	}
+
+	return 0;
+err3:
+	gpio_free(palm_lcd_power);
+err2:
+	gpio_free(palm_bl_power);
+err:
+	return ret;
+}
+
+static int palm27x_backlight_notify(struct device *dev, int brightness)
+{
+	gpio_set_value(palm_bl_power, brightness);
+	if (gpio_is_valid(palm_lcd_power))
+		gpio_set_value(palm_lcd_power, brightness);
+	return brightness;
+}
+
+static void palm27x_backlight_exit(struct device *dev)
+{
+	gpio_free(palm_bl_power);
+	if (gpio_is_valid(palm_lcd_power))
+		gpio_free(palm_lcd_power);
+}
+
+static struct platform_pwm_backlight_data palm27x_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 0xfe,
+	.dft_brightness	= 0x7e,
+	.pwm_period_ns	= 3500,
+	.init		= palm27x_backlight_init,
+	.notify		= palm27x_backlight_notify,
+	.exit		= palm27x_backlight_exit,
+};
+
+static struct platform_device palm27x_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palm27x_backlight_data,
+	},
+};
+
+void __init palm27x_pwm_init(int bl, int lcd)
+{
+	palm_bl_power	= bl;
+	palm_lcd_power	= lcd;
+	platform_device_register(&palm27x_backlight);
+}
+#endif
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+static int palm_ac_state;
+static int palm_usb_state;
+
+static int palm27x_power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(palm_ac_state, "AC state");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(palm_ac_state);
+	if (ret)
+		goto err2;
+
+	if (gpio_is_valid(palm_usb_state)) {
+		ret = gpio_request(palm_usb_state, "USB state");
+		if (ret)
+			goto err2;
+		ret = gpio_direction_input(palm_usb_state);
+		if (ret)
+			goto err3;
+	}
+
+	return 0;
+err3:
+	gpio_free(palm_usb_state);
+err2:
+	gpio_free(palm_ac_state);
+err1:
+	return ret;
+}
+
+static void palm27x_power_supply_exit(struct device *dev)
+{
+	gpio_free(palm_usb_state);
+	gpio_free(palm_ac_state);
+}
+
+static int palm27x_is_ac_online(void)
+{
+	return gpio_get_value(palm_ac_state);
+}
+
+static int palm27x_is_usb_online(void)
+{
+	return !gpio_get_value(palm_usb_state);
+}
+static char *palm27x_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata palm27x_ps_info = {
+	.init			= palm27x_power_supply_init,
+	.exit			= palm27x_power_supply_exit,
+	.is_ac_online		= palm27x_is_ac_online,
+	.is_usb_online		= palm27x_is_usb_online,
+	.supplied_to		= palm27x_supplicants,
+	.num_supplicants	= ARRAY_SIZE(palm27x_supplicants),
+};
+
+static struct platform_device palm27x_power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palm27x_ps_info,
+	},
+};
+
+void __init palm27x_power_init(int ac, int usb)
+{
+	palm_ac_state	= ac;
+	palm_usb_state	= usb;
+	platform_device_register(&palm27x_power_supply);
+}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data palm27x_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= palm27x_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(palm27x_max1587a_consumers),
+};
+
+static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &palm27x_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data palm27x_max1587a_info = {
+	.subdevs     = palm27x_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &palm27x_max1587a_info,
+	},
+};
+
+void __init palm27x_pmic_init(void)
+{
+	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
+	pxa27x_set_i2c_power_info(NULL);
+}
+#endif
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1963819dba98..91038eeafe44 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -22,7 +22,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
 #include <linux/mtd/mtd.h>
@@ -41,6 +41,7 @@
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -127,6 +128,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition palmld_partitions[] = {
 	{
 		.name		= "Flash",
@@ -160,20 +162,18 @@ static struct platform_device palmld_flash = {
 	},
 };
 
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmld_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
-	.detect_delay_ms	= 200,
-};
+static void __init palmld_nor_init(void)
+{
+	platform_device_register(&palmld_flash);
+}
+#else
+static inline void palmld_nor_init(void) {}
+#endif
 
 /******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmld_matrix_keys[] = {
 	KEY(0, 1, KEY_F2),
 	KEY(0, 2, KEY_UP),
@@ -200,9 +200,18 @@ static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
+static void __init palmld_kpc_init(void)
+{
+	pxa_set_keypad_info(&palmld_keypad_platform_data);
+}
+#else
+static inline void palmld_kpc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmld_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
 	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
@@ -222,77 +231,18 @@ static struct platform_device palmld_pxa_keys = {
 	},
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmld_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMLD_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmld_backlight_notify(struct device *dev, int brightness)
+static void __init palmld_keys_init(void)
 {
-	gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
-	return brightness;
+	platform_device_register(&palmld_pxa_keys);
 }
-
-static void palmld_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_BL_POWER);
-	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmld_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMLD_MAX_INTENSITY,
-	.dft_brightness	= PALMLD_MAX_INTENSITY,
-	.pwm_period_ns	= PALMLD_PERIOD_NS,
-	.init		= palmld_backlight_init,
-	.notify		= palmld_backlight_notify,
-	.exit		= palmld_backlight_exit,
-};
-
-static struct platform_device palmld_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmld_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmld_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMLD_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmld_keys_init(void) {}
+#endif
 
 /******************************************************************************
  * LEDs
  ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 struct gpio_led gpio_leds[] = {
 {
 	.name			= "palmld:green:led",
@@ -318,174 +268,34 @@ static struct platform_device palmld_leds = {
 	}
 };
 
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
-	if (ret)
-		goto err3;
-
-	return 0;
-
-err3:
-	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
-err2:
-	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmld_is_ac_online(void)
+static void __init palmld_leds_init(void)
 {
-	return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+	platform_device_register(&palmld_leds);
 }
-
-static int palmld_is_usb_online(void)
-{
-	return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
-	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-}
-
-static char *palmld_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmld_is_ac_online,
-	.is_usb_online   = palmld_is_usb_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmld_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmld_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMLD_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMLD_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmld_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMLD_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmld_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct platform_device palmld_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmld_asoc_pdata,
-	},
-};
+#else
+static inline void palmld_leds_init(void) {}
+#endif
 
 /******************************************************************************
  * HDD
  ******************************************************************************/
-static struct platform_device palmld_hdd = {
+#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
+static struct platform_device palmld_ide_device = {
 	.name	= "pata_palmld",
 	.id	= -1,
 };
 
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmld_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmld_lcd_screen = {
-	.modes		= palmld_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmld_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmld_pm_init(void)
+static void __init palmld_ide_init(void)
 {
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* copy the bootloader */
-	memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmld_ide_device);
 }
+#else
+static inline void palmld_ide_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmld_pxa_keys,
-#endif
-	&palmld_backlight,
-	&palmld_leds,
-	&power_supply,
-	&palmld_asoc,
-	&palmld_hdd,
-	&palmld_flash,
-};
-
 static struct map_desc palmld_io_desc[] __initdata = {
 {
 	.virtual	= PALMLD_IDE_VIRT,
@@ -510,20 +320,26 @@ static void __init palmld_map_io(void)
 static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	palmld_pm_init();
-	set_pxa_fb_info(&palmld_lcd_screen);
-	pxa_set_mci_info(&palmld_mci_platform_data);
-	pxa_set_ac97_info(&palmld_ac97_pdata);
-	pxa_set_ficp_info(&palmld_ficp_platform_data);
-	pxa_set_keypad_info(&palmld_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY,
+			GPIO_NR_PALMLD_SD_POWER, 0);
+	palm27x_pm_init(PALMLD_STR_BASE);
+	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+	palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
+	palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
+			GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
+	palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
+	palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
+			GPIO_NR_PALMLD_USB_DETECT_N);
+	palm27x_pmic_init();
+	palmld_kpc_init();
+	palmld_keys_init();
+	palmld_nor_init();
+	palmld_leds_init();
+	palmld_ide_init();
 }
 
 MACHINE_START(PALMLD, "Palm LifeDrive")
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 5e92d84fe50d..1c281995f658 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -25,7 +25,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 
@@ -42,6 +42,7 @@
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -104,19 +105,9 @@ static unsigned long palmt5_pin_config[] __initdata = {
 };
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmt5_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
-	.detect_delay_ms	= 200,
-};
-
-/******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmt5_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
@@ -142,9 +133,18 @@ static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
+static void __init palmt5_kpc_init(void)
+{
+	pxa_set_keypad_info(&palmt5_keypad_platform_data);
+}
+#else
+static inline void palmt5_kpc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmt5_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
 };
@@ -162,241 +162,17 @@ static struct platform_device palmt5_pxa_keys = {
 	},
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmt5_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMT5_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmt5_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmt5_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_BL_POWER);
-	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmt5_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMT5_MAX_INTENSITY,
-	.dft_brightness	= PALMT5_MAX_INTENSITY,
-	.pwm_period_ns	= PALMT5_PERIOD_NS,
-	.init		= palmt5_backlight_init,
-	.notify		= palmt5_backlight_notify,
-	.exit		= palmt5_backlight_exit,
-};
-
-static struct platform_device palmt5_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmt5_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmt5_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMT5_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmt5_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
-};
-
-static struct platform_device palmt5_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmt5_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-err2:
-	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmt5_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static char *palmt5_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmt5_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmt5_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmt5_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMT5_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMT5_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmt5_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMT5_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct platform_device palmt5_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmt5_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmt5_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmt5_lcd_screen = {
-	.modes		= palmt5_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmt5_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmt5_pm_init(void)
+static void __init palmt5_keys_init(void)
 {
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* copy the bootloader */
-	memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmt5_pxa_keys);
 }
+#else
+static inline void palmt5_keys_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmt5_pxa_keys,
-#endif
-	&palmt5_backlight,
-	&power_supply,
-	&palmt5_asoc,
-	&palmt5_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmt5_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
-	}
-}
-
 static void __init palmt5_reserve(void)
 {
 	memblock_reserve(0xa0200000, 0x1000);
@@ -405,21 +181,24 @@ static void __init palmt5_reserve(void)
 static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	palmt5_pm_init();
-	set_pxa_fb_info(&palmt5_lcd_screen);
-	pxa_set_mci_info(&palmt5_mci_platform_data);
-	palmt5_udc_init();
-	pxa_set_ac97_info(&palmt5_ac97_pdata);
-	pxa_set_ficp_info(&palmt5_ficp_platform_data);
-	pxa_set_keypad_info(&palmt5_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY,
+			GPIO_NR_PALMT5_SD_POWER, 0);
+	palm27x_pm_init(PALMT5_STR_BASE);
+	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+	palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
+			GPIO_NR_PALMT5_USB_PULLUP, 1);
+	palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
+	palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
+			GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
+	palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
+	palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
+	palm27x_pmic_init();
+	palmt5_kpc_init();
+	palmt5_keys_init();
 }
 
 MACHINE_START(PALMT5, "Palm Tungsten|T5")
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 3d284ff1a64e..93c11a0438d5 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -23,7 +23,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 
@@ -271,9 +271,9 @@ static struct platform_device power_supply = {
 };
 
 /******************************************************************************
- * WM97xx battery
+ * WM97xx audio, battery
  ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
+static struct wm97xx_batt_pdata palmte2_batt_pdata = {
 	.batt_aux	= WM97XX_AUX_ID3,
 	.temp_aux	= WM97XX_AUX_ID2,
 	.charge_gpio	= -1,
@@ -287,9 +287,14 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 	.batt_name	= "main-batt",
 };
 
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
+static struct wm97xx_pdata palmte2_wm97xx_pdata = {
+	.batt_pdata	= &palmte2_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
+	.codec_pdata	= { &palmte2_wm97xx_pdata, },
+};
+
 static struct palm27x_asoc_info palmte2_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
 };
@@ -361,9 +366,8 @@ static void __init palmte2_init(void)
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&palmte2_ac97_pdata);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 3d0c9cc2a406..52defd5e42e5 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -24,7 +24,6 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
 #include <linux/w1-gpio.h>
@@ -46,6 +45,7 @@
 #include <mach/pxa2xx-regs.h>
 #include <mach/palmasoc.h>
 #include <mach/camera.h>
+#include <mach/palm27x.h>
 
 #include <sound/pxa2xx-lib.h>
 
@@ -160,31 +160,9 @@ static unsigned long centro685_pin_config[] __initdata = {
 #endif /* CONFIG_MACH_CENTRO */
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
-static struct pxamci_platform_data treo680_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
-	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct pxamci_platform_data centro_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
-	.gpio_card_ro		= -1,
-	.gpio_power		= GPIO_NR_CENTRO_SD_POWER,
-	.gpio_power_invert	= 1,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int treo680_matrix_keys[] = {
 	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
 	KEY(0, 1, KEY_LEFT),
@@ -244,19 +222,6 @@ static unsigned int treo680_matrix_keys[] = {
 	KEY(7, 5, KEY_I),
 };
 
-static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= treo680_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
-	.direct_key_map		= { KEY_CONNECT },
-	.direct_key_num		= 1,
-
-	.debounce_interval	= 30,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
 static unsigned int centro_matrix_keys[] = {
 	KEY(0, 0, KEY_F9),		/* Home */
 	KEY(0, 1, KEY_LEFT),
@@ -316,157 +281,50 @@ static unsigned int centro_matrix_keys[] = {
 	KEY(7, 5, KEY_I),
 };
 
-static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 7,
-	.matrix_key_map		= centro_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(centro_matrix_keys),
+	.matrix_key_map		= treo680_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
 	.direct_key_map		= { KEY_CONNECT },
 	.direct_key_num		= 1,
 
 	.debounce_interval	= 30,
 };
-#endif /* CONFIG_MACH_CENTRO */
 
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-
-static pxa2xx_audio_ops_t treo_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int treo_backlight_init(struct device *dev)
+static void __init palmtreo_kpc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
-	if (ret)
-		goto err2;
-
-	return 0;
+	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
 
-err2:
-	gpio_free(GPIO_NR_TREO_BL_POWER);
-err:
-	return ret;
-}
-
-static int treo_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
-	return TREO_MAX_INTENSITY - brightness;
-};
+	if (machine_is_centro()) {
+		data->matrix_key_map = centro_matrix_keys;
+		data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys);
+	}
 
-static void treo_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO_BL_POWER);
+	pxa_set_keypad_info(&treo680_keypad_pdata);
 }
-
-static struct platform_pwm_backlight_data treo_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= TREO_MAX_INTENSITY,
-	.dft_brightness	= TREO_DEFAULT_INTENSITY,
-	.pwm_period_ns	= TREO_PERIOD_NS,
-	.init		= treo_backlight_init,
-	.notify		= treo_backlight_notify,
-	.exit		= treo_backlight_exit,
-};
-
-static struct platform_device treo_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &treo_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data treo_ficp_info = {
-	.gpio_pwdown		= GPIO_NR_TREO_IR_EN,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
-	.gpio_vbus		= GPIO_NR_TREO_USB_DETECT,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_TREO_USB_PULLUP,
-};
-
+#else
+static inline void palmtreo_kpc_init(void) {}
+#endif
 
 /******************************************************************************
  * USB host
  ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static struct pxaohci_platform_data treo680_ohci_info = {
 	.port_mode    = PMM_PERPORT_MODE,
 	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
 	.power_budget = 0,
 };
-#endif /* CONFIG_MACH_TREO680 */
 
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
+static void __init palmtreo_uhc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_TREO_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int treo_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
+	if (machine_is_treo680())
+		pxa_set_ohci_info(&treo680_ohci_info);
 }
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO_POWER_DETECT);
-}
-
-static char *treo_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init		 = power_supply_init,
-	.is_ac_online    = treo_is_ac_online,
-	.exit		 = power_supply_exit,
-	.supplied_to     = treo_supplicants,
-	.num_supplicants = ARRAY_SIZE(treo_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
+#else
+static inline void palmtreo_uhc_init(void) {}
+#endif
 
 /******************************************************************************
  * Vibra and LEDs
@@ -495,16 +353,6 @@ static struct gpio_led_platform_data treo680_gpio_led_info = {
 	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
 };
 
-static struct platform_device treo680_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &treo680_gpio_led_info,
-	}
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
 static struct gpio_led centro_gpio_leds[] = {
 	{
 		.name			= "centro:vibra:vibra",
@@ -529,145 +377,67 @@ static struct gpio_led_platform_data centro_gpio_led_info = {
 	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
 };
 
-static struct platform_device centro_leds = {
+static struct platform_device palmtreo_leds = {
 	.name   = "leds-gpio",
 	.id     = -1,
 	.dev    = {
-		.platform_data  = &centro_gpio_led_info,
+		.platform_data  = &treo680_gpio_led_info,
 	}
 };
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-/* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo_lcd_modes[] = {
-{
-	.pixclock		= 86538,
-	.xres			= 320,
-	.yres			= 320,
-	.bpp			= 16,
-
-	.left_margin		= 20,
-	.right_margin		= 8,
-	.upper_margin		= 8,
-	.lower_margin		= 5,
-
-	.hsync_len		= 4,
-	.vsync_len		= 1,
-},
-};
 
-static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
+static void __init palmtreo_leds_init(void)
 {
-	gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
-}
-
-static struct pxafb_mach_info treo_lcd_screen = {
-	.modes		= treo_lcd_modes,
-	.num_modes	= ARRAY_SIZE(treo_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+	if (machine_is_centro())
+		palmtreo_leds.dev.platform_data = &centro_gpio_led_info;
 
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init treo_pm_init(void)
-{
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* this is where the bootloader jumps */
-	memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmtreo_leds);
 }
+#else
+static inline void palmtreo_leds_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *treo_devices[] __initdata = {
-	&treo_backlight,
-	&power_supply,
-};
-
-#ifdef CONFIG_MACH_TREO680
-static struct platform_device *treo680_devices[] __initdata = {
-	&treo680_leds,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct platform_device *centro_devices[] __initdata = {
-	&centro_leds,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/* setup udc GPIOs initial state */
-static void __init treo_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_TREO_USB_PULLUP);
-	}
-}
-
-static void __init treo_lcd_power_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
-	if (ret) {
-		pr_err("Treo680: LCD power GPIO request failed!\n");
-		return;
-	}
-
-	ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
-	if (ret) {
-		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
-		gpio_free(GPIO_NR_TREO_LCD_POWER);
-		return;
-	}
-
-	treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
-}
-
 static void __init treo_reserve(void)
 {
 	memblock_reserve(0xa0000000, 0x1000);
 	memblock_reserve(0xa2000000, 0x1000);
 }
 
-static void __init treo_init(void)
+static void __init palmphone_common_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
-
-	treo_pm_init();
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
-	treo_lcd_power_init();
-	set_pxa_fb_info(&treo_lcd_screen);
-	treo_udc_init();
-	pxa_set_udc_info(&treo_udc_info);
-	pxa_set_ac97_info(&treo_ac97_pdata);
-	pxa_set_ficp_info(&treo_ficp_info);
-
-	platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+	palm27x_pm_init(TREO_STR_BASE);
+	palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
+	palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
+	palm27x_irda_init(GPIO_NR_TREO_IR_EN);
+	palm27x_ac97_init(-1, -1, -1, 95);
+	palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
+	palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
+	palm27x_pmic_init();
+	palmtreo_kpc_init();
+	palmtreo_uhc_init();
+	palmtreo_leds_init();
 }
 
-#ifdef CONFIG_MACH_TREO680
 static void __init treo680_init(void)
 {
-	treo_init();
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	pxa_set_mci_info(&treo680_mci_platform_data);
-	pxa_set_keypad_info(&treo680_keypad_platform_data);
-	pxa_set_ohci_info(&treo680_ohci_info);
+	palmphone_common_init();
+	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
+			GPIO_NR_TREO680_SD_POWER, 0);
+}
 
-	platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
+static void __init centro_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+	palmphone_common_init();
+	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
+			GPIO_NR_CENTRO_SD_POWER, 1);
 }
 
 MACHINE_START(TREO680, "Palm Treo 680")
@@ -680,19 +450,6 @@ MACHINE_START(TREO680, "Palm Treo 680")
 	.timer          = &pxa_timer,
 	.init_machine   = treo680_init,
 MACHINE_END
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static void __init centro_init(void)
-{
-	treo_init();
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
-	pxa_set_mci_info(&centro_mci_platform_data);
-
-	pxa_set_keypad_info(&centro_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(centro_devices));
-}
 
 MACHINE_START(CENTRO, "Palm Centro 685")
 	.phys_io        = TREO_PHYS_IO_START,
@@ -702,6 +459,5 @@ MACHINE_START(CENTRO, "Palm Centro 685")
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-       .init_machine   = centro_init,
+	.init_machine	= centro_init,
 MACHINE_END
-#endif /* CONFIG_MACH_CENTRO */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index ecc1a401598e..144dc2b6911f 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -25,7 +25,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/mtd/nand.h>
@@ -46,6 +46,7 @@
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -129,6 +130,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition palmtx_partitions[] = {
 	{
 		.name		= "Flash",
@@ -162,20 +164,18 @@ static struct platform_device palmtx_flash = {
 	},
 };
 
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmtx_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
-	.detect_delay_ms	= 200,
-};
+static void __init palmtx_nor_init(void)
+{
+	platform_device_register(&palmtx_flash);
+}
+#else
+static inline void palmtx_nor_init(void) {}
+#endif
 
 /******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmtx_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
@@ -201,9 +201,18 @@ static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
+static void __init palmtx_kpc_init(void)
+{
+	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+}
+#else
+static inline void palmtx_kpc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmtx_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
 };
@@ -221,208 +230,18 @@ static struct platform_device palmtx_pxa_keys = {
 	},
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmtx_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMTX_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmtx_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmtx_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTX_BL_POWER);
-	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmtx_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMTX_MAX_INTENSITY,
-	.dft_brightness	= PALMTX_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTX_PERIOD_NS,
-	.init		= palmtx_backlight_init,
-	.notify		= palmtx_backlight_notify,
-	.exit		= palmtx_backlight_exit,
-};
-
-static struct platform_device palmtx_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmtx_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmtx_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTX_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmtx_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
-};
-
-static struct platform_device palmtx_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtx_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmtx_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
+static void __init palmtx_keys_init(void)
 {
-	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+	platform_device_register(&palmtx_pxa_keys);
 }
-
-static char *palmtx_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmtx_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmtx_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMTX_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMTX_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmtx_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMTX_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct platform_device palmtx_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmtx_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmtx_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmtx_lcd_screen = {
-	.modes		= palmtx_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmtx_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmtx_keys_init(void) {}
+#endif
 
 /******************************************************************************
  * NAND Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
@@ -482,36 +301,17 @@ static struct platform_device palmtx_nand = {
 	}
 };
 
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmtx_pm_init(void)
+static void __init palmtx_nand_init(void)
 {
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* copy the bootloader */
-	memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmtx_nand);
 }
+#else
+static inline void palmtx_nand_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmtx_pxa_keys,
-#endif
-	&palmtx_backlight,
-	&power_supply,
-	&palmtx_asoc,
-	&palmtx_gpio_vbus,
-	&palmtx_flash,
-	&palmtx_nand,
-};
-
 static struct map_desc palmtx_io_desc[] __initdata = {
 {
 	.virtual	= PALMTX_PCMCIA_VIRT,
@@ -537,34 +337,29 @@ static void __init palmtx_map_io(void)
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
-/* setup udc GPIOs initial state */
-static void __init palmtx_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
-	}
-}
-
-
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	palmtx_pm_init();
-	set_pxa_fb_info(&palmtx_lcd_screen);
-	pxa_set_mci_info(&palmtx_mci_platform_data);
-	palmtx_udc_init();
-	pxa_set_ac97_info(&palmtx_ac97_pdata);
-	pxa_set_ficp_info(&palmtx_ficp_platform_data);
-	pxa_set_keypad_info(&palmtx_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
+			GPIO_NR_PALMTX_SD_POWER, 0);
+	palm27x_pm_init(PALMTX_STR_BASE);
+	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+	palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
+			GPIO_NR_PALMTX_USB_PULLUP, 1);
+	palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
+	palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
+			GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
+	palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
+	palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
+	palm27x_pmic_init();
+	palmtx_kpc_init();
+	palmtx_keys_init();
+	palmtx_nor_init();
+	palmtx_nand_init();
 }
 
 MACHINE_START(PALMTX, "Palm T|X")
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 3a7925ca3944..87e4b1044e0b 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -27,7 +27,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 
@@ -44,6 +44,7 @@
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include <mach/pm.h>
 
@@ -109,21 +110,9 @@ static unsigned long palmz72_pin_config[] __initdata = {
 };
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-/* SD_POWER is not actually power, but it is more like chip
- * select, i.e. it is inverted */
-static struct pxamci_platform_data palmz72_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMZ72_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMZ72_SD_RO,
-	.gpio_power		= GPIO_NR_PALMZ72_SD_POWER_N,
-	.gpio_power_invert	= 1,
-};
-
-/******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmz72_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
@@ -149,77 +138,18 @@ static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmz72_backlight_init(struct device *dev)
+static void __init palmz72_kpc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmz72_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmz72_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
-	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+	pxa_set_keypad_info(&palmz72_keypad_platform_data);
 }
-
-static struct platform_pwm_backlight_data palmz72_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMZ72_MAX_INTENSITY,
-	.dft_brightness	= PALMZ72_MAX_INTENSITY,
-	.pwm_period_ns	= PALMZ72_PERIOD_NS,
-	.init		= palmz72_backlight_init,
-	.notify		= palmz72_backlight_notify,
-	.exit		= palmz72_backlight_exit,
-};
-
-static struct platform_device palmz72_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmz72_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmz72_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMZ72_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmz72_kpc_init(void) {}
+#endif
 
 /******************************************************************************
  * LEDs
  ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "palmz72:green:led",
@@ -241,139 +171,13 @@ static struct platform_device palmz72_leds = {
 	}
 };
 
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmz72_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMZ72_USB_DETECT_N,
-	.gpio_pullup		= GPIO_NR_PALMZ72_USB_PULLUP,
-};
-
-static struct platform_device palmz72_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmz72_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmz72_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static int palmz72_is_usb_online(void)
+static void __init palmz72_leds_init(void)
 {
-	return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+	platform_device_register(&palmz72_leds);
 }
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
-	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static char *palmz72_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmz72_is_ac_online,
-	.is_usb_online   = palmz72_is_usb_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmz72_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmz72_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMZ72_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMZ72_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct platform_device palmz72_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmz72_lcd_modes[] = {
-{
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmz72_lcd_screen = {
-	.modes		= palmz72_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmz72_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmz72_leds_init(void) {}
+#endif
 
 #ifdef CONFIG_PM
 
@@ -452,40 +256,26 @@ device_initcall(palmz72_pm_init);
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-	&palmz72_backlight,
-	&palmz72_leds,
-	&palmz72_asoc,
-	&power_supply,
-	&palmz72_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmz72_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
-		gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
-		gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
-	}
-}
-
 static void __init palmz72_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	set_pxa_fb_info(&palmz72_lcd_screen);
-	pxa_set_mci_info(&palmz72_mci_platform_data);
-	palmz72_udc_init();
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&palmz72_ficp_platform_data);
-	pxa_set_keypad_info(&palmz72_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO,
+			GPIO_NR_PALMZ72_SD_POWER_N, 1);
+	palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
+	palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
+			GPIO_NR_PALMZ72_USB_PULLUP, 0);
+	palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
+	palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
+			-1, 113);
+	palm27x_pwm_init(-1, -1);
+	palm27x_power_init(-1, -1);
+	palm27x_pmic_init();
+	palmz72_kpc_init();
+	palmz72_leds_init();
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index bc2758b54446..55e8fcde0141 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -43,7 +43,6 @@
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
-#include <mach/sharpsl.h>
 #include <mach/pxa2xx_spi.h>
 #include <plat/i2c.h>
 
@@ -53,7 +52,6 @@
 
 #include "generic.h"
 #include "devices.h"
-#include "sharpsl.h"
 
 static unsigned long poodle_pin_config[] __initdata = {
 	/* I/O */
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 0b9ad30bfd51..de53f2e4aa39 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -322,6 +322,7 @@ void __init pxa26x_init_irq(void)
 
 static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_udc,
+	&pxa_device_pmu,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa25x_device_ssp,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index c059dac02b61..12e5b9f01e6f 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -383,6 +383,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
+	&pxa_device_pmu,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index f544e58e1536..fa0014847c71 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -52,7 +52,7 @@
 static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
 
 /* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 0 };
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
 
 /*
  * Get the clock frequency as reflected by CCSR and the turbo flag.
@@ -552,11 +552,23 @@ static void pxa_unmask_ext_wakeup(unsigned int irq)
 	PECR |= PECR_IE(irq - IRQ_WAKEUP0);
 }
 
+static int pxa_set_ext_wakeup_type(unsigned int irq, unsigned int flow_type)
+{
+	if (flow_type & IRQ_TYPE_EDGE_RISING)
+		PWER |= 1 << (irq - IRQ_WAKEUP0);
+
+	if (flow_type & IRQ_TYPE_EDGE_FALLING)
+		PWER |= 1 << (irq - IRQ_WAKEUP0 + 2);
+
+	return 0;
+}
+
 static struct irq_chip pxa_ext_wakeup_chip = {
 	.name		= "WAKEUP",
 	.ack		= pxa_ack_ext_wakeup,
 	.mask		= pxa_mask_ext_wakeup,
 	.unmask		= pxa_unmask_ext_wakeup,
+	.set_type	= pxa_set_ext_wakeup_type,
 };
 
 static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
@@ -596,6 +608,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
+	&pxa_device_pmu,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d4b61b3f08f3..67e04f4e07c1 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -745,13 +745,32 @@ static int raumfeld_is_usb_online(void)
 
 static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
 
+static void raumfeld_power_signal_charged(void)
+{
+	struct power_supply *psy =
+		power_supply_get_by_name(raumfeld_power_supplicants[0]);
+
+	if (psy)
+		power_supply_set_battery_charged(psy);
+}
+
+static int raumfeld_power_resume(void)
+{
+	/* check if GPIO_CHARGE_DONE went low while we were sleeping */
+	if (!gpio_get_value(GPIO_CHARGE_DONE))
+		raumfeld_power_signal_charged();
+
+	return 0;
+}
+
 static struct pda_power_pdata power_supply_info = {
 	.init			= power_supply_init,
 	.is_ac_online		= raumfeld_is_ac_online,
 	.is_usb_online		= raumfeld_is_usb_online,
 	.exit			= power_supply_exit,
 	.supplied_to		= raumfeld_power_supplicants,
-	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants)
+	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants),
+	.resume			= raumfeld_power_resume,
 };
 
 static struct resource power_supply_resources[] = {
@@ -766,13 +785,7 @@ static struct resource power_supply_resources[] = {
 
 static irqreturn_t charge_done_irq(int irq, void *dev_id)
 {
-	struct power_supply *psy;
-
-	psy = power_supply_get_by_name("ds2760-battery.0");
-
-	if (psy)
-		power_supply_set_battery_charged(psy);
-
+	raumfeld_power_signal_charged();
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
deleted file mode 100644
index 0cc1203c5bef..000000000000
--- a/arch/arm/mach-pxa/sharpsl.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/sharpsl_pm.h>
-
-/*
- * SharpSL Battery/PM Driver
- */
-#define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
-
-/* MAX1111 Channel Definitions */
-#define MAX1111_BATT_VOLT   4u
-#define MAX1111_BATT_TEMP   2u
-#define MAX1111_ACIN_VOLT   6u
-
-extern struct battery_thresh sharpsl_battery_levels_acin[];
-extern struct battery_thresh sharpsl_battery_levels_noac[];
-int sharpsl_pm_pxa_read_max1111(int channel);
-
-
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index cb4767251f3c..8fed027b12dc 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -29,11 +29,8 @@
 #include <mach/pm.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
 #include <mach/sharpsl_pm.h>
 
-#include "sharpsl.h"
-
 /*
  * Constants
  */
@@ -180,17 +177,12 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa())
 	    return 0;
 
-#ifdef CONFIG_CORGI_SSP_DEPRECATED
-	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
-			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
-#else
 	extern int max1111_read_channel(int);
 
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */
 	return max1111_read_channel(channel >> 1);
-#endif
 }
 
 static int get_percentage(int voltage)
@@ -277,21 +269,6 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
 			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
 
-#ifdef CONFIG_BACKLIGHT_CORGI
-	/* If battery is low. limit backlight intensity to save power. */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-	    && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
-	    || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
-		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-			sharpsl_pm.machinfo->backlight_limit(1);
-			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
-		}
-	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-		sharpsl_pm.machinfo->backlight_limit(0);
-		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
-	}
-#endif
-
 	/* Suspend if critical battery level */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
 	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 2ed95f369cfc..52c30b01a671 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -339,10 +339,6 @@ ENTRY(pxa_cpu_resume)
 	mcr	p15, 0, r1, c8, c7, 0   	@ invalidate I & D TLBs
 	mcr	p15, 0, r1, c7, c7, 0		@ invalidate I & D caches, BTB
 
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
-	bic     r9, r9, #0x0004			@ see cpu_xscale_proc_init
-#endif
-
 	mcr	p14, 0, r3, c6, c0, 0		@ clock configuration, turbo mode.
 	mcr	p15, 0, r4, c15, c1, 0		@ CP access reg
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
@@ -368,9 +364,6 @@ sleep_save_sp:
 
 	.text
 resume_after_mmu:
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
-	bl	cpu_xscale_proc_init
-#endif
 	ldmfd	sp!, {r2, r3}
 #ifndef CONFIG_IWMMXT
 	mar	acc0, r2, r3
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 51756c723557..1cd99cb87bb1 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -18,14 +18,15 @@
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
+#include <linux/mtd/physmap.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -33,22 +34,25 @@
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
-
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
+#include <mach/sharpsl_pm.h>
+
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
-#include "sharpsl.h"
 
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
 static unsigned long spitz_pin_config[] __initdata = {
 	/* Chip Selects */
 	GPIO78_nCS_2,	/* SCOOP #2 */
@@ -124,10 +128,13 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
 };
 
-/*
- * Spitz SCOOP Device #1
- */
-static struct resource spitz_scoop_resources[] = {
+
+/******************************************************************************
+ * Scoop GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
+/* SCOOP Device #1 */
+static struct resource spitz_scoop_1_resources[] = {
 	[0] = {
 		.start		= 0x10800000,
 		.end		= 0x10800fff,
@@ -135,7 +142,7 @@ static struct resource spitz_scoop_resources[] = {
 	},
 };
 
-static struct scoop_config spitz_scoop_setup = {
+static struct scoop_config spitz_scoop_1_setup = {
 	.io_dir		= SPITZ_SCP_IO_DIR,
 	.io_out		= SPITZ_SCP_IO_OUT,
 	.suspend_clr	= SPITZ_SCP_SUS_CLR,
@@ -143,20 +150,18 @@ static struct scoop_config spitz_scoop_setup = {
 	.gpio_base	= SPITZ_SCP_GPIO_BASE,
 };
 
-struct platform_device spitzscoop_device = {
+struct platform_device spitz_scoop_1_device = {
 	.name		= "sharp-scoop",
 	.id		= 0,
 	.dev		= {
- 		.platform_data	= &spitz_scoop_setup,
+		.platform_data	= &spitz_scoop_1_setup,
 	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop_resources),
-	.resource	= spitz_scoop_resources,
+	.num_resources	= ARRAY_SIZE(spitz_scoop_1_resources),
+	.resource	= spitz_scoop_1_resources,
 };
 
-/*
- * Spitz SCOOP Device #2
- */
-static struct resource spitz_scoop2_resources[] = {
+/* SCOOP Device #2 */
+static struct resource spitz_scoop_2_resources[] = {
 	[0] = {
 		.start		= 0x08800040,
 		.end		= 0x08800fff,
@@ -164,7 +169,7 @@ static struct resource spitz_scoop2_resources[] = {
 	},
 };
 
-static struct scoop_config spitz_scoop2_setup = {
+static struct scoop_config spitz_scoop_2_setup = {
 	.io_dir		= SPITZ_SCP2_IO_DIR,
 	.io_out		= SPITZ_SCP2_IO_OUT,
 	.suspend_clr	= SPITZ_SCP2_SUS_CLR,
@@ -172,82 +177,110 @@ static struct scoop_config spitz_scoop2_setup = {
 	.gpio_base	= SPITZ_SCP2_GPIO_BASE,
 };
 
-struct platform_device spitzscoop2_device = {
+struct platform_device spitz_scoop_2_device = {
 	.name		= "sharp-scoop",
 	.id		= 1,
 	.dev		= {
- 		.platform_data	= &spitz_scoop2_setup,
+		.platform_data	= &spitz_scoop_2_setup,
 	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop2_resources),
-	.resource	= spitz_scoop2_resources,
+	.num_resources	= ARRAY_SIZE(spitz_scoop_2_resources),
+	.resource	= spitz_scoop_2_resources,
 };
 
-#define SPITZ_PWR_SD 0x01
-#define SPITZ_PWR_CF 0x02
+static void __init spitz_scoop_init(void)
+{
+	platform_device_register(&spitz_scoop_1_device);
+
+	/* Akita doesn't have the second SCOOP chip */
+	if (!machine_is_akita())
+		platform_device_register(&spitz_scoop_2_device);
+}
 
 /* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
+static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
 {
-	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
+	unsigned short cpr;
+	unsigned long flags;
 
-	if (new_cpr & 0x0007) {
+	if (new_cpr & 0x7) {
 		gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
-		if (!(cpr & 0x0002) && !(cpr & 0x0004))
-		        mdelay(5);
-		if (device == SPITZ_PWR_CF)
-		        cpr |= 0x0002;
-		if (device == SPITZ_PWR_SD)
-		        cpr |= 0x0004;
-	        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
-	} else {
-		if (device == SPITZ_PWR_CF)
-		        cpr &= ~0x0002;
-		if (device == SPITZ_PWR_SD)
-		        cpr &= ~0x0004;
-		if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
-			write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
-		        mdelay(1);
-			gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
-		} else {
-		        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
-		}
+		mdelay(5);
+	}
+
+	local_irq_save(flags);
+
+	cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
+
+	if (enable & new_cpr)
+		cpr |= new_cpr;
+	else
+		cpr &= ~enable;
+
+	write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
+
+	local_irq_restore(flags);
+
+	if (!(cpr & 0x7)) {
+		mdelay(1);
+		gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
 	}
 }
 
-static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
+#else
+static inline void spitz_scoop_init(void) {}
+static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
+#endif
+
+/******************************************************************************
+ * PCMCIA
+ ******************************************************************************/
+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
 {
 	/* Only need to override behaviour for slot 0 */
 	if (nr == 0)
-		spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
+		spitz_card_pwr_ctrl(
+			cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
 	else
 		write_scoop_reg(scoop, SCOOP_CPR, cpr);
 }
 
 static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
-{
-	.dev        = &spitzscoop_device.dev,
-	.irq        = SPITZ_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = SPITZ_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},{
-	.dev        = &spitzscoop2_device.dev,
-	.irq        = SPITZ_IRQ_GPIO_CF2_IRQ,
-	.cd_irq     = -1,
-},
+	{
+		.dev		= &spitz_scoop_1_device.dev,
+		.irq		= SPITZ_IRQ_GPIO_CF_IRQ,
+		.cd_irq		= SPITZ_IRQ_GPIO_CF_CD,
+		.cd_irq_str	= "PCMCIA0 CD",
+	}, {
+		.dev		= &spitz_scoop_2_device.dev,
+		.irq		= SPITZ_IRQ_GPIO_CF2_IRQ,
+		.cd_irq		= -1,
+	},
 };
 
 static struct scoop_pcmcia_config spitz_pcmcia_config = {
-	.devs         = &spitz_pcmcia_scoop[0],
-	.num_devs     = 2,
-	.power_ctrl   = spitz_pcmcia_pwr,
+	.devs		= &spitz_pcmcia_scoop[0],
+	.num_devs	= 2,
+	.power_ctrl	= spitz_pcmcia_pwr,
 };
 
-EXPORT_SYMBOL(spitzscoop_device);
-EXPORT_SYMBOL(spitzscoop2_device);
+static void __init spitz_pcmcia_init(void)
+{
+	/* Akita has only one PCMCIA slot used */
+	if (machine_is_akita())
+		spitz_pcmcia_config.num_devs = 1;
+
+	platform_scoop_config = &spitz_pcmcia_config;
+}
+#else
+static inline void spitz_pcmcia_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
 
-/*
- * Spitz Keyboard Device
- */
 #define SPITZ_KEY_CALENDAR	KEY_F1
 #define SPITZ_KEY_ADDRESS	KEY_F2
 #define SPITZ_KEY_FN		KEY_F3
@@ -263,7 +296,7 @@ EXPORT_SYMBOL(spitzscoop2_device);
 #define SPITZ_KEY_OK		KEY_F11
 #define SPITZ_KEY_MENU		KEY_F12
 
-static const uint32_t spitzkbd_keymap[] = {
+static const uint32_t spitz_keymap[] = {
 	KEY(0, 0, KEY_LEFTCTRL),
 	KEY(0, 1, KEY_1),
 	KEY(0, 2, KEY_3),
@@ -330,36 +363,47 @@ static const uint32_t spitzkbd_keymap[] = {
 	KEY(6, 8, KEY_RIGHT),
 };
 
-static const struct matrix_keymap_data spitzkbd_keymap_data = {
-	.keymap		= spitzkbd_keymap,
-	.keymap_size	= ARRAY_SIZE(spitzkbd_keymap),
+static const struct matrix_keymap_data spitz_keymap_data = {
+	.keymap		= spitz_keymap,
+	.keymap_size	= ARRAY_SIZE(spitz_keymap),
 };
 
-static const uint32_t spitzkbd_row_gpios[] =
+static const uint32_t spitz_row_gpios[] =
 		{ 12, 17, 91, 34, 36, 38, 39 };
-static const uint32_t spitzkbd_col_gpios[] =
+static const uint32_t spitz_col_gpios[] =
 		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
 
-static struct matrix_keypad_platform_data spitzkbd_pdata = {
-	.keymap_data		= &spitzkbd_keymap_data,
-	.row_gpios		= spitzkbd_row_gpios,
-	.col_gpios		= spitzkbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(spitzkbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(spitzkbd_col_gpios),
+static struct matrix_keypad_platform_data spitz_mkp_pdata = {
+	.keymap_data		= &spitz_keymap_data,
+	.row_gpios		= spitz_row_gpios,
+	.col_gpios		= spitz_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(spitz_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(spitz_col_gpios),
 	.col_scan_delay_us	= 10,
 	.debounce_ms		= 10,
 	.wakeup			= 1,
 };
 
-static struct platform_device spitzkbd_device = {
+static struct platform_device spitz_mkp_device = {
 	.name		= "matrix-keypad",
 	.id		= -1,
 	.dev		= {
-		.platform_data = &spitzkbd_pdata,
+		.platform_data	= &spitz_mkp_pdata,
 	},
 };
 
+static void __init spitz_mkp_init(void)
+{
+	platform_device_register(&spitz_mkp_device);
+}
+#else
+static inline void spitz_mkp_init(void) {}
+#endif
 
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button spitz_gpio_keys[] = {
 	{
 		.type	= EV_PWR,
@@ -396,10 +440,18 @@ static struct platform_device spitz_gpio_keys_device = {
 	},
 };
 
+static void __init spitz_keys_init(void)
+{
+	platform_device_register(&spitz_gpio_keys_device);
+}
+#else
+static inline void spitz_keys_init(void) {}
+#endif
 
-/*
- * Spitz LEDs
- */
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led spitz_gpio_leds[] = {
 	{
 		.name			= "spitz:amber:charge",
@@ -418,20 +470,27 @@ static struct gpio_led_platform_data spitz_gpio_leds_info = {
 	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
 };
 
-static struct platform_device spitzled_device = {
+static struct platform_device spitz_led_device = {
 	.name		= "leds-gpio",
 	.id		= -1,
 	.dev		= {
-		.platform_data = &spitz_gpio_leds_info,
+		.platform_data	= &spitz_gpio_leds_info,
 	},
 };
 
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master spitz_spi_info = {
-	.num_chipselect	= 3,
-};
+static void __init spitz_leds_init(void)
+{
+	platform_device_register(&spitz_led_device);
+}
+#else
+static inline void spitz_leds_init(void) {}
+#endif
 
-static void spitz_wait_for_hsync(void)
+/******************************************************************************
+ * SSP Devices
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static void spitz_ads7846_wait_for_hsync(void)
 {
 	while (gpio_get_value(SPITZ_GPIO_HSYNC))
 		cpu_relax();
@@ -447,7 +506,7 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.y_plate_ohms		= 486,
 	.pressure_max		= 1024,
 	.gpio_pendown		= SPITZ_GPIO_TP_INT,
-	.wait_for_sync		= spitz_wait_for_hsync,
+	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
 static struct pxa2xx_spi_chip spitz_ads7846_chip = {
@@ -485,72 +544,88 @@ static struct pxa2xx_spi_chip spitz_max1111_chip = {
 
 static struct spi_board_info spitz_spi_devices[] = {
 	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 1200000,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.platform_data	= &spitz_ads7846_info,
-		.controller_data= &spitz_ads7846_chip,
-		.irq		= gpio_to_irq(SPITZ_GPIO_TP_INT),
+		.modalias		= "ads7846",
+		.max_speed_hz		= 1200000,
+		.bus_num		= 2,
+		.chip_select		= 0,
+		.platform_data		= &spitz_ads7846_info,
+		.controller_data	= &spitz_ads7846_chip,
+		.irq			= gpio_to_irq(SPITZ_GPIO_TP_INT),
 	}, {
-		.modalias	= "corgi-lcd",
-		.max_speed_hz	= 50000,
-		.bus_num	= 2,
-		.chip_select	= 1,
-		.platform_data	= &spitz_lcdcon_info,
-		.controller_data= &spitz_lcdcon_chip,
+		.modalias		= "corgi-lcd",
+		.max_speed_hz		= 50000,
+		.bus_num		= 2,
+		.chip_select		= 1,
+		.platform_data		= &spitz_lcdcon_info,
+		.controller_data	= &spitz_lcdcon_chip,
 	}, {
-		.modalias	= "max1111",
-		.max_speed_hz	= 450000,
-		.bus_num	= 2,
-		.chip_select	= 2,
-		.controller_data= &spitz_max1111_chip,
+		.modalias		= "max1111",
+		.max_speed_hz		= 450000,
+		.bus_num		= 2,
+		.chip_select		= 2,
+		.controller_data	= &spitz_max1111_chip,
 	},
 };
 
-static void __init spitz_init_spi(void)
+static struct pxa2xx_spi_master spitz_spi_info = {
+	.num_chipselect	= 3,
+};
+
+static void __init spitz_spi_init(void)
 {
+	struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
+
 	if (machine_is_akita()) {
-		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
-		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+		lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+		lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
 	}
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }
 #else
-static inline void spitz_init_spi(void) {}
+static inline void spitz_spi_init(void) {}
 #endif
 
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 /*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
+ * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
+ * give the card a chance to fully insert/eject.
  */
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask)
-		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
+	if ((1 << vdd) & p_d->ocr_mask)
+		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
 	else
-		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
+		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
 	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.setpower 		= spitz_mci_setpower,
+	.setpower		= spitz_mci_setpower,
 	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
 	.gpio_card_ro		= SPITZ_GPIO_nSD_WP,
 	.gpio_power		= -1,
 };
 
+static void __init spitz_mmc_init(void)
+{
+	pxa_set_mci_info(&spitz_mci_platform_data);
+}
+#else
+static inline void spitz_mmc_init(void) {}
+#endif
 
-/*
- * USB Host (OHCI)
- */
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int spitz_ohci_init(struct device *dev)
 {
 	int err;
@@ -559,9 +634,7 @@ static int spitz_ohci_init(struct device *dev)
 	if (err)
 		return err;
 
-	/* Only Port 2 is connected
-	 * Setup USB Port 2 Output Control Register
-	 */
+	/* Only Port 2 is connected, setup USB Port 2 Output Control Register */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 
 	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
@@ -580,67 +653,95 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.power_budget	= 150,
 };
 
+static void __init spitz_uhc_init(void)
+{
+	pxa_set_ohci_info(&spitz_ohci_platform_data);
+}
+#else
+static inline void spitz_uhc_init(void) {}
+#endif
 
-/*
- * Irda
- */
-
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
-/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
+static void __init spitz_irda_init(void)
+{
+	if (machine_is_akita())
+		spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
+	else
+		spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
-/*
- * Spitz PXA Framebuffer
- */
+	pxa_set_ficp_info(&spitz_ficp_platform_data);
+}
+#else
+static inline void spitz_irda_init(void) {}
+#endif
 
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info spitz_pxafb_modes[] = {
-{
-	.pixclock       = 19231,
-	.xres           = 480,
-	.yres           = 640,
-	.bpp            = 16,
-	.hsync_len      = 40,
-	.left_margin    = 46,
-	.right_margin   = 125,
-	.vsync_len      = 3,
-	.upper_margin   = 1,
-	.lower_margin   = 0,
-	.sync           = 0,
-},{
-	.pixclock       = 134617,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 20,
-	.left_margin    = 20,
-	.right_margin   = 46,
-	.vsync_len      = 2,
-	.upper_margin   = 1,
-	.lower_margin   = 0,
-	.sync           = 0,
-},
+	{
+		.pixclock       = 19231,
+		.xres           = 480,
+		.yres           = 640,
+		.bpp            = 16,
+		.hsync_len      = 40,
+		.left_margin    = 46,
+		.right_margin   = 125,
+		.vsync_len      = 3,
+		.upper_margin   = 1,
+		.lower_margin   = 0,
+		.sync           = 0,
+	}, {
+		.pixclock       = 134617,
+		.xres           = 240,
+		.yres           = 320,
+		.bpp            = 16,
+		.hsync_len      = 20,
+		.left_margin    = 20,
+		.right_margin   = 46,
+		.vsync_len      = 2,
+		.upper_margin   = 1,
+		.lower_margin   = 0,
+		.sync           = 0,
+	},
 };
 
 static struct pxafb_mach_info spitz_pxafb_info = {
-	.modes          = &spitz_pxafb_modes[0],
-	.num_modes      = 2,
+	.modes          = spitz_pxafb_modes,
+	.num_modes      = ARRAY_SIZE(spitz_pxafb_modes),
 	.fixed_modes    = 1,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
 };
 
-static struct mtd_partition sharpsl_nand_partitions[] = {
+static void __init spitz_lcd_init(void)
+{
+	set_pxa_fb_info(&spitz_pxafb_info);
+}
+#else
+static inline void spitz_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
+static struct mtd_partition spitz_nand_partitions[] = {
 	{
 		.name = "System Area",
 		.offset = 0,
 		.size = 7 * 1024 * 1024,
-	},
-	{
+	}, {
 		.name = "Root Filesystem",
 		.offset = 7 * 1024 * 1024,
-	},
-	{
+	}, {
 		.name = "Home Filesystem",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
@@ -649,37 +750,72 @@ static struct mtd_partition sharpsl_nand_partitions[] = {
 
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
+static struct nand_bbt_descr spitz_nand_bbt = {
+	.options	= 0,
+	.offs		= 4,
+	.len		= 2,
+	.pattern	= scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+	.oobfree	= { {0x08, 0x09} },
+	.eccbytes	= 24,
+	.eccpos		= {
+			0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
+			0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+			0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
+	},
 };
 
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.partitions		= sharpsl_nand_partitions,
-	.nr_partitions		= ARRAY_SIZE(sharpsl_nand_partitions),
+static struct sharpsl_nand_platform_data spitz_nand_pdata = {
+	.badblock_pattern	= &spitz_nand_bbt,
+	.partitions		= spitz_nand_partitions,
+	.nr_partitions		= ARRAY_SIZE(spitz_nand_partitions),
 };
 
-static struct resource sharpsl_nand_resources[] = {
+static struct resource spitz_nand_resources[] = {
 	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
+		.start	= PXA_CS3_PHYS,
+		.end	= PXA_CS3_PHYS + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
-static struct platform_device sharpsl_nand_device = {
+static struct platform_device spitz_nand_device = {
 	.name		= "sharpsl-nand",
 	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
+	.resource	= spitz_nand_resources,
+	.num_resources	= ARRAY_SIZE(spitz_nand_resources),
+	.dev		= {
+		.platform_data	= &spitz_nand_pdata,
+	}
 };
 
+static void __init spitz_nand_init(void)
+{
+	if (machine_is_spitz()) {
+		spitz_nand_partitions[1].size = 5 * 1024 * 1024;
+	} else if (machine_is_akita()) {
+		spitz_nand_partitions[1].size = 58 * 1024 * 1024;
+		spitz_nand_bbt.len = 1;
+		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+	} else if (machine_is_borzoi()) {
+		spitz_nand_partitions[1].size = 32 * 1024 * 1024;
+		spitz_nand_bbt.len = 1;
+		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+	}
+
+	platform_device_register(&spitz_nand_device);
+}
+#else
+static inline void spitz_nand_init(void) {}
+#endif
 
-static struct mtd_partition sharpsl_rom_parts[] = {
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition spitz_rom_parts[] = {
 	{
 		.name	="Boot PROM Filesystem",
 		.offset	= 0x00140000,
@@ -687,37 +823,105 @@ static struct mtd_partition sharpsl_rom_parts[] = {
 	},
 };
 
-static struct physmap_flash_data sharpsl_rom_data = {
+static struct physmap_flash_data spitz_rom_data = {
 	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
+	.nr_parts	= ARRAY_SIZE(spitz_rom_parts),
+	.parts		= spitz_rom_parts,
 };
 
-static struct resource sharpsl_rom_resources[] = {
+static struct resource spitz_rom_resources[] = {
 	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_8M - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
+static struct platform_device spitz_rom_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= spitz_rom_resources,
+	.num_resources	= ARRAY_SIZE(spitz_rom_resources),
+	.dev		= {
+		.platform_data	= &spitz_rom_data,
+	},
 };
 
-static struct platform_device *devices[] __initdata = {
-	&spitzscoop_device,
-	&spitzkbd_device,
-	&spitz_gpio_keys_device,
-	&spitzled_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
+static void __init spitz_nor_init(void)
+{
+	platform_device_register(&spitz_rom_device);
+}
+#else
+static inline void spitz_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pca953x_platform_data akita_pca953x_pdata = {
+	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
 };
 
+static struct i2c_board_info spitz_i2c_devs[] = {
+	{
+		.type		= "wm8750",
+		.addr		= 0x1b,
+	}, {
+		.type		= "max7310",
+		.addr		= 0x18,
+		.platform_data	= &akita_pca953x_pdata,
+	},
+};
+
+static struct regulator_consumer_supply isl6271a_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data isl6271a_info[] = {
+	{
+		.constraints = {
+			.name		= "vcc_core range",
+			.min_uV		= 850000,
+			.max_uV		= 1600000,
+			.always_on	= 1,
+			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		},
+	.consumer_supplies	= isl6271a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(isl6271a_consumers),
+	}
+};
+
+static struct i2c_board_info spitz_pi2c_devs[] = {
+	{
+		.type		= "isl6271a",
+		.addr		= 0x0c,
+		.platform_data	= &isl6271a_info,
+	},
+};
+
+static void __init spitz_i2c_init(void)
+{
+	int size = ARRAY_SIZE(spitz_i2c_devs);
+
+	/* Only Akita has the max7310 chip */
+	if (!machine_is_akita())
+		size--;
+
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, spitz_i2c_devs, size);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
+}
+#else
+static inline void spitz_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
 static void spitz_poweroff(void)
 {
 	arm_machine_restart('g', NULL);
@@ -726,26 +930,18 @@ static void spitz_poweroff(void)
 static void spitz_restart(char mode, const char *cmd)
 {
 	/* Bootloader magic for a reboot */
-	if((MSC0 & 0xffff0000) == 0x7ff00000)
+	if ((MSC0 & 0xffff0000) == 0x7ff00000)
 		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
 
 	spitz_poweroff();
 }
 
-static void __init common_init(void)
+static void __init spitz_init(void)
 {
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
-	if (machine_is_spitz()) {
-		sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
-	} else if (machine_is_akita()) {
-		sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
-	} else if (machine_is_borzoi()) {
-		sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
-	}
-
 	PMCR = 0x00;
 
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
@@ -757,91 +953,22 @@ static void __init common_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	spitz_init_spi();
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_mci_info(&spitz_mci_platform_data);
-	pxa_set_ohci_info(&spitz_ohci_platform_data);
-	pxa_set_ficp_info(&spitz_ficp_platform_data);
-	set_pxa_fb_info(&spitz_pxafb_info);
-	pxa_set_i2c_info(NULL);
+	spitz_spi_init();
+	spitz_scoop_init();
+	spitz_mkp_init();
+	spitz_keys_init();
+	spitz_leds_init();
+	spitz_mmc_init();
+	spitz_pcmcia_init();
+	spitz_irda_init();
+	spitz_uhc_init();
+	spitz_lcd_init();
+	spitz_nor_init();
+	spitz_nand_init();
+	spitz_i2c_init();
 }
 
-#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
-static struct nand_bbt_descr sharpsl_akita_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 1,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
-	.eccbytes = 24,
-	.eccpos = {
-		   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
-		   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-		   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-	.oobfree = {{0x08, 0x09}}
-};
-#endif
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void __init spitz_init(void)
-{
-	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-#ifdef CONFIG_MACH_BORZOI
-	if (machine_is_borzoi()) {
-		sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
-		sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-	}
-#endif
-
-	platform_scoop_config = &spitz_pcmcia_config;
-
-	common_init();
-
-	platform_device_register(&spitzscoop2_device);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-/*
- * Akita IO Expander
- */
-static struct pca953x_platform_data akita_ioexp = {
-	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
-};
-
-static struct i2c_board_info akita_i2c_board_info[] = {
-	{
-		.type		= "max7310",
-		.addr		= 0x18,
-		.platform_data	= &akita_ioexp,
-	}, {
-		.type		= "wm8750",
-		.addr		= 0x1b,
-	},
-};
-
-static void __init akita_init(void)
-{
-	spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-
-	sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
-	sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-
-	/* We just pretend the second element of the array doesn't exist */
-	spitz_pcmcia_config.num_devs = 1;
-	platform_scoop_config = &spitz_pcmcia_config;
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
-
-	common_init();
-}
-#endif
-
-static void __init fixup_spitz(struct machine_desc *desc,
+static void __init spitz_fixup(struct machine_desc *desc,
 		struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	sharpsl_save_param();
@@ -854,7 +981,7 @@ static void __init fixup_spitz(struct machine_desc *desc,
 MACHINE_START(SPITZ, "SHARP Spitz")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup		= fixup_spitz,
+	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
@@ -866,7 +993,7 @@ MACHINE_END
 MACHINE_START(BORZOI, "SHARP Borzoi")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup		= fixup_spitz,
+	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
@@ -878,10 +1005,10 @@ MACHINE_END
 MACHINE_START(AKITA, "SHARP Akita")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup		= fixup_spitz,
+	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
-	.init_machine	= akita_init,
+	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 4209ddf6da61..7fe74067d85f 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -22,11 +22,10 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
-#include <mach/sharpsl.h>
 #include <mach/spitz.h>
 #include <mach/pxa27x.h>
+#include <mach/sharpsl_pm.h>
 
-#include "sharpsl.h"
 #include "generic.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
@@ -178,11 +177,11 @@ unsigned long spitzpm_read_devdata(int type)
 	case SHARPSL_STATUS_ACIN:
 		return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
 	case SHARPSL_STATUS_LOCK:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
 	case SHARPSL_STATUS_CHRGFULL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
 	case SHARPSL_STATUS_FATAL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
 	case SHARPSL_ACIN_VOLT:
 		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
 	case SHARPSL_BATT_TEMP:
@@ -212,8 +211,6 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.should_wakeup    = spitz_should_wakeup,
 #if defined(CONFIG_LCD_CORGI)
 	.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
-	.backlight_limit  = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index af40d2a12d37..a654d1e6b38a 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -29,6 +29,7 @@
 #include <linux/i2c/at24.h>
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -62,37 +63,12 @@
 #define SG2_GPIO_nSD_DETECT	90
 #define SG2_SD_POWER_ENABLE	89
 
-static unsigned long stargate2_pin_config[] __initdata = {
-
-	GPIO15_nCS_1, /* SRAM */
-	/* SMC91x */
-	GPIO80_nCS_4,
-	GPIO40_GPIO, /*cable detect?*/
+static unsigned long sg2_im2_unified_pin_config[] __initdata = {
 	/* Device Identification for wakeup*/
 	GPIO102_GPIO,
-
-	/* Button */
-	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
 	/* DA9030 */
 	GPIO1_GPIO,
 
-	/* Compact Flash */
-	GPIO79_PSKTSEL,
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO120_GPIO, /* Buff ctrl */
-	GPIO108_GPIO, /* Power ctrl */
-	GPIO82_GPIO, /* Reset */
-	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO112_MMC_CMD,
@@ -100,49 +76,44 @@ static unsigned long stargate2_pin_config[] __initdata = {
 	GPIO109_MMC_DAT_1,
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
-	GPIO90_GPIO, /* nSD detect */
-	GPIO89_GPIO, /* SD_POWER_ENABLE */
 
-	/* Bluetooth */
-	GPIO81_GPIO, /* reset */
-
-	/* cc2420 802.15.4 radio */
-	GPIO22_GPIO,		/* CC_RSTN  (out)*/
-	GPIO114_GPIO,		/* CC_FIFO (in) */
-	GPIO116_GPIO, 		/* CC_CCA (in) */
-	GPIO0_GPIO,		/* CC_FIFOP (in) */
-	GPIO16_GPIO,		/* CCSFD (in) */
-	GPIO39_GPIO,		/* CSn (out) */
+	/* 802.15.4 radio - driver out of mainline */
+	GPIO22_GPIO,			/* CC_RSTN */
+	GPIO114_GPIO,			/* CC_FIFO */
+	GPIO116_GPIO,			/* CC_CCA */
+	GPIO0_GPIO,			/* CC_FIFOP */
+	GPIO16_GPIO,			/* CCSFD */
+	GPIO115_GPIO,			/* Power enable */
 
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
 
 	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO, /* chip select */
+	GPIO39_GPIO,			/* Chip Select */
 	GPIO34_SSP3_SCLK,
 	GPIO35_SSP3_TXD,
 	GPIO41_SSP3_RXD,
 
-	/* SSP 2 */
+	/* SSP 2 to daughter boards */
 	GPIO11_SSP2_RXD,
 	GPIO38_SSP2_TXD,
 	GPIO36_SSP2_SCLK,
 	GPIO37_GPIO, /* chip select */
 
-	/* SSP 1 */
-	GPIO26_SSP1_RXD,
-	GPIO25_SSP1_TXD,
+	/* SSP 1 - to daughter boards */
+	GPIO24_GPIO,			/* Chip Select */
 	GPIO23_SSP1_SCLK,
-	GPIO24_GPIO, /* chip select */
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
 
-	/* BTUART */
+	/* BTUART Basic Connector*/
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* STUART */
+	/* STUART  - IM2 via debug board not sure on SG2*/
 	GPIO46_STUART_RXD,
 	GPIO47_STUART_TXD,
 
@@ -150,47 +121,17 @@ static unsigned long stargate2_pin_config[] __initdata = {
 	GPIO96_GPIO,	/* accelerometer interrupt */
 	GPIO99_GPIO,	/* ADC interrupt */
 
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-
 	/* SHT15 */
 	GPIO100_GPIO,
 	GPIO98_GPIO,
-};
 
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
-	int err;
-	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
-	if (err) {
-		printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
-		return err;
-	}
-	gpio_direction_output(SG2_BT_RESET, 1);
-	mdelay(5);
-	/* now reset it - 5 msec minimum */
-	gpio_set_value(SG2_BT_RESET, 0);
-	mdelay(10);
-	gpio_set_value(SG2_BT_RESET, 1);
-	gpio_free(SG2_BT_RESET);
-	return 0;
-}
+	/* Basic sensor board */
+	GPIO96_GPIO,	/* accelerometer interrupt */
+	GPIO99_GPIO,	/* ADC interrupt */
 
-static struct led_info stargate2_leds[] = {
-	{
-		.name = "sg2:red",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:blue",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:green",
-		.flags = DA9030_LED_RATE_ON,
-	},
+	/* Connector pins specified as gpios */
+	GPIO94_GPIO, /* large basic connector pin 14 */
+	GPIO10_GPIO, /* large basic connector pin 23 */
 };
 
 static struct sht15_platform_data platform_data_sht15 = {
@@ -352,20 +293,184 @@ static struct regulator_init_data stargate2_ldo_init_data[] = {
 	},
 };
 
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+static struct mtd_partition stargate2flash_partitions[] = {
 	{
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_2,
-		.platform_data = &stargate2_leds[0],
+		.name = "Bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = 0,
 	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_3,
-		.platform_data = &stargate2_leds[2],
+		.name = "Kernel",
+		.size = 0x00200000,
+		.offset = 0x00040000,
+		.mask_flags = 0
 	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_4,
-		.platform_data = &stargate2_leds[1],
+		.name = "Filesystem",
+		.size = 0x01DC0000,
+		.offset = 0x00240000,
+		.mask_flags = 0
+	},
+};
+
+static struct resource flash_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+	.map_name = "cfi_probe",
+	.parts = stargate2flash_partitions,
+	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+	.name = "PXA27xOnChipROM",
+	.width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+	.name = "pxa2xx-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &stargate2_flash_data,
+	},
+	.resource = &flash_resources,
+	.num_resources = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+	.num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias = "lis3l02dq",
+		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &staccel_chip_info,
+		.irq = IRQ_GPIO(96),
 	}, {
+		.modalias = "cc2420",
+		.max_speed_hz = 6500000,
+		.bus_num = 3,
+		.chip_select = 0,
+		.controller_data = &cc2420_info,
+	},
+};
+
+static void sg2_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+		break;
+	}
+}
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+	.fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+	.fast_mode = 1,
+};
+
+static void __init imote2_stargate2_init(void)
+{
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+
+	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+	pxa_set_i2c_info(&i2c_pdata);
+}
+
+#ifdef CONFIG_MACH_INTELMOTE2
+/* As the the imote2 doesn't currently have a conventional SD slot
+ * there is no option to hotplug cards, making all this rather simple
+ */
+static int imote2_mci_get_ro(struct device *dev)
+{
+	return 0;
+}
+
+/* Rather simple case as hotplugging not possible */
+static struct pxamci_platform_data imote2_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
+	.get_ro = imote2_mci_get_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power = -1,
+};
+
+static struct gpio_led imote2_led_pins[] = {
+	{
+		.name       =  "imote2:red",
+		.gpio       = 103,
+		.active_low = 1,
+	}, {
+		.name       = "imote2:green",
+		.gpio       = 104,
+		.active_low = 1,
+	}, {
+		.name       = "imote2:blue",
+		.gpio       = 105,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data imote2_led_data = {
+	.num_leds = ARRAY_SIZE(imote2_led_pins),
+	.leds     = imote2_led_pins,
+};
+
+static struct platform_device imote2_leds = {
+	.name = "leds-gpio",
+	.id   = -1,
+	.dev = {
+		.platform_data = &imote2_led_data,
+	},
+};
+
+static struct da903x_subdev_info imote2_da9030_subdevs[] = {
+	{
 		.name = "da903x-regulator",
 		.id = DA9030_ID_LDO2,
 		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
@@ -428,9 +533,121 @@ static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
 	},
 };
 
-static struct da903x_platform_data stargate2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
-	.subdevs = stargate2_da9030_subdevs,
+static struct da903x_platform_data imote2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
+	.subdevs = imote2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &imote2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
+
+static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
+	{ /* UCAM sensor board */
+		.type = "max1239",
+		.addr = 0x35,
+	}, { /* ITS400 Sensor board only */
+		.type = "max1363",
+		.addr = 0x34,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tsl2561",
+		.addr = 0x49,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tmp175",
+		.addr = 0x4A,
+		.irq = IRQ_GPIO(96),
+	}, { /* IMB400 Multimedia board */
+		.type = "wm8940",
+		.addr = 0x1A,
+	},
+};
+
+static unsigned long imote2_pin_config[] __initdata = {
+
+	/* Button */
+	GPIO91_GPIO,
+
+	/* LEDS */
+	GPIO103_GPIO, /* red led */
+	GPIO104_GPIO, /* green led */
+	GPIO105_GPIO, /* blue led */
+};
+
+static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
+	.udc_command		= sg2_udc_command,
+};
+
+static struct platform_device *imote2_devices[] = {
+	&stargate2_flash_device,
+	&imote2_leds,
+	&sht15,
+};
+
+static void __init imote2_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+	imote2_stargate2_init();
+
+	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
+
+	i2c_register_board_info(0, imote2_i2c_board_info,
+				ARRAY_SIZE(imote2_i2c_board_info));
+	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
+				ARRAY_SIZE(imote2_pwr_i2c_board_info));
+
+	pxa_set_mci_info(&imote2_mci_platform_data);
+	pxa_set_udc_info(&imote2_udc_info);
+}
+#endif
+
+#ifdef CONFIG_MACH_STARGATE2
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+	GPIO15_nCS_1, /* SRAM */
+	/* SMC91x */
+	GPIO80_nCS_4,
+	GPIO40_GPIO, /*cable detect?*/
+
+	/* Button */
+	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+	/* Compact Flash */
+	GPIO79_PSKTSEL,
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO120_GPIO, /* Buff ctrl */
+	GPIO108_GPIO, /* Power ctrl */
+	GPIO82_GPIO, /* Reset */
+	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+	/* MMC not shared with imote2 */
+	GPIO90_GPIO, /* nSD detect */
+	GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+	/* Bluetooth */
+	GPIO81_GPIO, /* reset */
 };
 
 static struct resource smc91x_resources[] = {
@@ -463,7 +680,6 @@ static struct platform_device smc91x_device = {
 };
 
 
-
 /*
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert / eject.
@@ -532,48 +748,6 @@ static struct pxamci_platform_data stargate2_mci_platform_data = {
 	.exit = stargate2_mci_exit,
 };
 
-static struct mtd_partition stargate2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = 0,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = stargate2flash_partitions,
-	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &stargate2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
 
 /*
  * SRAM - The Stargate 2 has 32MB of SRAM.
@@ -616,6 +790,129 @@ static struct at24_platform_data pca9500_eeprom_pdata = {
 	.page_size = 4,
 };
 
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+	int err;
+	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+	if (err) {
+		printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
+		return err;
+	}
+	gpio_direction_output(SG2_BT_RESET, 1);
+	mdelay(5);
+	/* now reset it - 5 msec minimum */
+	gpio_set_value(SG2_BT_RESET, 0);
+	mdelay(10);
+	gpio_set_value(SG2_BT_RESET, 1);
+	gpio_free(SG2_BT_RESET);
+	return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+	{
+		.name = "sg2:red",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:blue",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:green",
+		.flags = DA9030_LED_RATE_ON,
+	},
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+	{
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_2,
+		.platform_data = &stargate2_leds[0],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_3,
+		.platform_data = &stargate2_leds[2],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_4,
+		.platform_data = &stargate2_leds[1],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO2,
+		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO3,
+		.platform_data = &stargate2_ldo_init_data[vcc_bb],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO4,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO5,
+		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO6,
+		.platform_data = &stargate2_ldo_init_data[vcc_vref],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO7,
+		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO8,
+		.platform_data = &stargate2_ldo_init_data[vcc_mica],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO9,
+		.platform_data = &stargate2_ldo_init_data[vcc_bt],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO10,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO11,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO12,
+		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO15,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO17,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+	}, {
+		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+		.id = DA9030_ID_LDO18,
+		.platform_data = &stargate2_ldo_init_data[vcc_io],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO19,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+	},
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+	.subdevs = stargate2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &stargate2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
 
 static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
 	/* Techically this a pca9500 - but it's compatible with the 8574
@@ -653,74 +950,6 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
 	},
 };
 
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &stargate2_da9030_pdata,
-		.irq = gpio_to_irq(1),
-	},
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use gpio's via cs_control */
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = IRQ_GPIO(96),
-	}, {
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void sg2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
 /* Board doesn't support cable detection - so always lie and say
  * something is there.
  */
@@ -741,14 +970,6 @@ static struct platform_device *stargate2_devices[] = {
 	&sht15,
 };
 
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
 static void __init stargate2_init(void)
 {
 	/* This is probably a board specific hack as this must be set
@@ -757,22 +978,13 @@ static void __init stargate2_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
 
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
+	imote2_stargate2_init();
 
 	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
 
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
 	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
-	i2c_register_board_info(1,
-				ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
+	i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
+				ARRAY_SIZE(stargate2_pwr_i2c_board_info));
 
 	pxa_set_mci_info(&stargate2_mci_platform_data);
 
@@ -780,7 +992,21 @@ static void __init stargate2_init(void)
 
 	stargate2_reset_bluetooth();
 }
+#endif
+
+#ifdef CONFIG_MACH_INTELMOTE2
+MACHINE_START(INTELMOTE2, "IMOTE 2")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= imote2_init,
+	.boot_params	= 0xA0000100,
+MACHINE_END
+#endif
 
+#ifdef CONFIG_MACH_STARGATE2
 MACHINE_START(STARGATE2, "Stargate 2")
 	.phys_io = 0x40000000,
 	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
@@ -790,3 +1016,4 @@ MACHINE_START(STARGATE2, "Stargate 2")
 	.init_machine = stargate2_init,
 	.boot_params = 0xA0000100,
 MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 69689112eae7..0acff172ef22 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -530,13 +530,9 @@ static void __init trizeps4_init(void)
 	i2c_register_board_info(0, trizeps4_i2c_devices,
 					ARRAY_SIZE(trizeps4_i2c_devices));
 
-#ifdef CONFIG_IDE_PXA_CF
-	/* if boot direct from compact flash dont disable power */
-	trizeps_conxs_bcr = 0x0009;
-#else
 	/* this is the reset value */
 	trizeps_conxs_bcr = 0x00A0;
-#endif
+
 	BCR_writew(trizeps_conxs_bcr);
 	board_backlight_power(1);
 }
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 9884fa978f16..c9b747cedea8 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -25,6 +25,7 @@
 #include <linux/dm9000.h>
 #include <linux/ucb1400.h>
 #include <linux/ata_platform.h>
+#include <linux/regulator/max1586.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,6 +38,7 @@
 #include <mach/ohci.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/udc.h>
+#include <mach/pata_pxa.h>
 
 #include <plat/i2c.h>
 
@@ -464,7 +466,6 @@ static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
 
 static void __init vpac270_rtc_init(void)
 {
-	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
 }
 #else
@@ -492,7 +493,55 @@ static struct pxafb_mode_info vpac270_lcd_modes[] = {
 	.vsync_len	= 2,
 
 	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-},
+}, {	/* CRT 640x480 */
+	.pixclock	= 35000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 16,
+	.depth		= 16,
+
+	.left_margin	= 96,
+	.right_margin	= 48,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+
+	.hsync_len	= 48,
+	.vsync_len	= 1,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, {	/* CRT 800x600 H=30kHz V=48HZ */
+	.pixclock	= 25000,
+	.xres		= 800,
+	.yres		= 600,
+	.bpp		= 16,
+	.depth		= 16,
+
+	.left_margin	= 50,
+	.right_margin	= 1,
+	.upper_margin	= 21,
+	.lower_margin	= 12,
+
+	.hsync_len	= 8,
+	.vsync_len	= 1,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, {	/* CRT 1024x768 H=40kHz V=50Hz */
+	.pixclock	= 15000,
+	.xres		= 1024,
+	.yres		= 768,
+	.bpp		= 16,
+	.depth		= 16,
+
+	.left_margin	= 220,
+	.right_margin	= 8,
+	.upper_margin	= 33,
+	.lower_margin	= 2,
+
+	.hsync_len	= 48,
+	.vsync_len	= 1,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}
 };
 
 static struct pxafb_mach_info vpac270_lcd_screen = {
@@ -538,9 +587,10 @@ static inline void vpac270_lcd_init(void) {}
 /******************************************************************************
  * PATA IDE
  ******************************************************************************/
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-static struct pata_platform_info vpac270_pata_pdata = {
-	.ioport_shift	= 1,
+#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
+static struct pata_pxa_pdata vpac270_pata_pdata = {
+	.reg_shift	= 1,
+	.dma_dreq	= 1,
 	.irq_flags	= IRQF_TRIGGER_RISING,
 };
 
@@ -555,7 +605,12 @@ static struct resource vpac270_ide_resources[] = {
 	       .end	= PXA_CS3_PHYS + 0x15f,
 	       .flags	= IORESOURCE_MEM
 	},
-	[2] = {	/* IDE IRQ pin */
+	[2] = {	/* DMA Base address */
+	       .start	= PXA_CS3_PHYS + 0x20,
+	       .end	= PXA_CS3_PHYS + 0x2f,
+	       .flags	= IORESOURCE_DMA
+	},
+	[3] = {	/* IDE IRQ pin */
 	       .start	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
 	       .end	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
 	       .flags	= IORESOURCE_IRQ
@@ -563,11 +618,12 @@ static struct resource vpac270_ide_resources[] = {
 };
 
 static struct platform_device vpac270_ide_device = {
-	.name		= "pata_platform",
+	.name		= "pata_pxa",
 	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
 	.resource	= vpac270_ide_resources,
 	.dev		= {
 		.platform_data	= &vpac270_pata_pdata,
+		.coherent_dma_mask	= 0xffffffff,
 	}
 };
 
@@ -580,6 +636,59 @@ static inline void vpac270_ide_init(void) {}
 #endif
 
 /******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data vpac270_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= vpac270_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(vpac270_max1587a_consumers),
+};
+
+static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &vpac270_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data vpac270_max1587a_info = {
+	.subdevs     = vpac270_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &vpac270_max1587a_info,
+	},
+};
+
+static void __init vpac270_pmic_init(void)
+{
+	i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
+}
+#else
+static inline void vpac270_pmic_init(void) {}
+#endif
+
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void __init vpac270_init(void)
@@ -589,7 +698,10 @@ static void __init vpac270_init(void)
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
 
+	vpac270_pmic_init();
 	vpac270_lcd_init();
 	vpac270_mmc_init();
 	vpac270_nor_init();
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index d303c6929d32..f0d02288b4ca 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pwm_backlight.h>
+#include <linux/z2_battery.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/libertas_spi.h>
@@ -26,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -162,7 +164,7 @@ static struct mtd_partition z2_flash_parts[] = {
 	}, {
 		.name	= "U-Boot Environment",
 		.offset	= 0x40000,
-		.size	= 0x60000,
+		.size	= 0x20000,
 	}, {
 		.name	= "Flash",
 		.offset	= 0x60000,
@@ -452,6 +454,42 @@ static inline void z2_keys_init(void) {}
 #endif
 
 /******************************************************************************
+ * Battery
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct z2_battery_info batt_chip_info = {
+	.batt_I2C_bus	= 0,
+	.batt_I2C_addr	= 0x55,
+	.batt_I2C_reg	= 2,
+	.charge_gpio	= GPIO0_ZIPITZ2_AC_DETECT,
+	.min_voltage	= 2400000,
+	.max_voltage	= 3700000,
+	.batt_div	= 69,
+	.batt_mult	= 1000000,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
+	.batt_name	= "Z2",
+};
+
+static struct i2c_board_info __initdata z2_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("aer915", 0x55),
+		.platform_data	= &batt_chip_info,
+	}, {
+		I2C_BOARD_INFO("wm8750", 0x1b),
+	},
+
+};
+
+static void __init z2_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
+}
+#else
+static inline void z2_i2c_init(void) {}
+#endif
+
+/******************************************************************************
  * SSP Devices - WiFi and LCD control
  ******************************************************************************/
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
@@ -573,23 +611,95 @@ static inline void z2_spi_init(void) {}
 #endif
 
 /******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_TPS65023) || \
+	defined(CONFIG_REGULATOR_TPS65023_MODULE)
+static struct regulator_consumer_supply z2_tps65021_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data z2_tps65021_info[] = {
+	{
+		.constraints = {
+			.name		= "vcc_core range",
+			.min_uV		= 800000,
+			.max_uV		= 1600000,
+			.always_on	= 1,
+			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		},
+		.consumer_supplies	= z2_tps65021_consumers,
+		.num_consumer_supplies	= ARRAY_SIZE(z2_tps65021_consumers),
+	}, {
+		.constraints = {
+			.name		= "DCDC2",
+			.min_uV		= 3300000,
+			.max_uV		= 3300000,
+			.always_on	= 1,
+		},
+	}, {
+		.constraints = {
+			.name		= "DCDC3",
+			.min_uV		= 1800000,
+			.max_uV		= 1800000,
+			.always_on	= 1,
+		},
+	}, {
+		.constraints = {
+			.name		= "LDO1",
+			.min_uV		= 1000000,
+			.max_uV		= 3150000,
+			.always_on	= 1,
+		},
+	}, {
+		.constraints = {
+			.name		= "LDO2",
+			.min_uV		= 1050000,
+			.max_uV		= 3300000,
+			.always_on	= 1,
+		},
+	}
+};
+
+static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("tps65021", 0x48),
+		.platform_data	= &z2_tps65021_info,
+	},
+};
+
+static void __init z2_pmic_init(void)
+{
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
+}
+#else
+static inline void z2_pmic_init(void) {}
+#endif
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void __init z2_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	z2_lcd_init();
 	z2_mmc_init();
 	z2_mkp_init();
-
-	pxa_set_i2c_info(NULL);
-
+	z2_i2c_init();
 	z2_spi_init();
 	z2_nor_init();
 	z2_pwm_init();
 	z2_leds_init();
 	z2_keys_init();
+	z2_pmic_init();
 }
 
 MACHINE_START(ZIPIT2, "Zipit Z2")