Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...

9 files changed, 111 insertions, 202 deletions

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 10bfdb169366..183cd3446f25 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -35,7 +35,6 @@
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
-#include <linux/module.h>
 #include <linux/memblock.h>
 #include <video/w100fb.h>
 
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 03354c21e1f2..811a7317f3ea 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/mfd/da903x.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
 #include <linux/spi/libertas_spi.h>
@@ -34,8 +35,6 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/regulator/userspace-consumer.h>
 
-#include <media/soc_camera.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -958,8 +957,6 @@ static inline void em_x270_init_gpio_keys(void) {}
 
 /* Quick Capture Interface and sensor setup */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
-static struct regulator *em_x270_camera_ldo;
-
 static int em_x270_sensor_init(void)
 {
 	int ret;
@@ -969,81 +966,53 @@ static int em_x270_sensor_init(void)
 		return ret;
 
 	gpio_direction_output(cam_reset, 0);
-
-	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
-	if (em_x270_camera_ldo == NULL) {
-		gpio_free(cam_reset);
-		return -ENODEV;
-	}
-
-	ret = regulator_enable(em_x270_camera_ldo);
-	if (ret) {
-		regulator_put(em_x270_camera_ldo);
-		gpio_free(cam_reset);
-		return ret;
-	}
-
 	gpio_set_value(cam_reset, 1);
 
 	return 0;
 }
 
-struct pxacamera_platform_data em_x270_camera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 2600,
+static struct regulator_consumer_supply camera_dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd", "0-005d"),
 };
 
-static int em_x270_sensor_power(struct device *dev, int on)
-{
-	int ret;
-	int is_on = regulator_is_enabled(em_x270_camera_ldo);
-
-	if (on == is_on)
-		return 0;
-
-	gpio_set_value(cam_reset, !on);
-
-	if (on)
-		ret = regulator_enable(em_x270_camera_ldo);
-	else
-		ret = regulator_disable(em_x270_camera_ldo);
-
-	if (ret)
-		return ret;
-
-	gpio_set_value(cam_reset, on);
-
-	return 0;
-}
-
-static struct i2c_board_info em_x270_i2c_cam_info[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x48),
+static struct regulator_init_data camera_dummy_initdata = {
+	.consumer_supplies = camera_dummy_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 	},
 };
 
-static struct soc_camera_link iclink = {
-	.bus_id		= 0,
-	.power		= em_x270_sensor_power,
-	.board_info	= &em_x270_i2c_cam_info[0],
-	.i2c_adapter_id	= 0,
+static struct fixed_voltage_config camera_dummy_config = {
+	.supply_name		= "camera_vdd",
+	.input_supply		= "vcc cam",
+	.microvolts		= 2800000,
+	.gpio			= -1,
+	.enable_high		= 0,
+	.init_data		= &camera_dummy_initdata,
 };
 
-static struct platform_device em_x270_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= -1,
+static struct platform_device camera_supply_dummy_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 1,
 	.dev	= {
-		.platform_data = &iclink,
+		.platform_data = &camera_dummy_config,
 	},
 };
 
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 2600,
+	.sensor_i2c_adapter_id = 0,
+	.sensor_i2c_address = 0x5d,
+};
+
 static void  __init em_x270_init_camera(void)
 {
-	if (em_x270_sensor_init() == 0) {
+	if (em_x270_sensor_init() == 0)
 		pxa_set_camera_info(&em_x270_camera_platform_data);
-		platform_device_register(&em_x270_camera);
-	}
+	platform_device_register(&camera_supply_dummy_device);
 }
 #else
 static inline void em_x270_init_camera(void) {}
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 34ad0a89d4a9..0b8300e6fca3 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,14 +17,14 @@
 #include <linux/delay.h>
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds-lp3944.h>
 #include <linux/i2c/pxa-i2c.h>
 
-#include <media/soc_camera.h>
-
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -723,6 +723,42 @@ static struct platform_device a780_gpio_keys = {
 };
 
 /* camera */
+static struct regulator_consumer_supply camera_dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd", "0-005d"),
+};
+
+static struct regulator_init_data camera_dummy_initdata = {
+	.consumer_supplies = camera_dummy_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config camera_dummy_config = {
+	.supply_name		= "camera_vdd",
+	.microvolts		= 2800000,
+	.gpio			= GPIO50_nCAM_EN,
+	.enable_high		= 0,
+	.init_data		= &camera_dummy_initdata,
+};
+
+static struct platform_device camera_supply_dummy_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &camera_dummy_config,
+	},
+};
+static int a780_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+	return 0;
+}
+
 static int a780_camera_init(void)
 {
 	int err;
@@ -731,73 +767,36 @@ static int a780_camera_init(void)
 	 * GPIO50_nCAM_EN is active low
 	 * GPIO19_GEN1_CAM_RST is active on rising edge
 	 */
-	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
-	if (err) {
-		pr_err("%s: Failed to request nCAM_EN\n", __func__);
-		goto fail;
-	}
-
 	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
 	if (err) {
 		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		goto fail_gpio_cam_rst;
+		return err;
 	}
 
-	gpio_direction_output(GPIO50_nCAM_EN, 1);
 	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
-
-	return 0;
-
-fail_gpio_cam_rst:
-	gpio_free(GPIO50_nCAM_EN);
-fail:
-	return err;
-}
-
-static int a780_camera_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO50_nCAM_EN, !on);
-	return 0;
-}
-
-static int a780_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+	a780_camera_reset(NULL);
 
 	return 0;
 }
 
 struct pxacamera_platform_data a780_pxacamera_platform_data = {
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
+		PXA_CAMERA_PCP,
 	.mclk_10khz = 5000,
+	.sensor_i2c_adapter_id = 0,
+	.sensor_i2c_address = 0x5d,
 };
 
-static struct i2c_board_info a780_camera_i2c_board_info = {
-	I2C_BOARD_INFO("mt9m111", 0x5d),
-};
-
-static struct soc_camera_link a780_iclink = {
-	.bus_id         = 0,
-	.flags          = SOCAM_SENSOR_INVERT_PCLK,
-	.i2c_adapter_id = 0,
-	.board_info     = &a780_camera_i2c_board_info,
-	.power          = a780_camera_power,
-	.reset          = a780_camera_reset,
-};
-
-static struct platform_device a780_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &a780_iclink,
+static struct i2c_board_info a780_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("mt9m111", 0x5d),
 	},
 };
 
 static struct platform_device *a780_devices[] __initdata = {
 	&a780_gpio_keys,
+	&camera_supply_dummy_device,
 };
 
 static void __init a780_init(void)
@@ -811,19 +810,19 @@ static void __init a780_init(void)
 	pxa_set_stuart_info(NULL);
 
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(a780_i2c_board_info));
 
 	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
-	if (a780_camera_init() == 0) {
+	if (a780_camera_init() == 0)
 		pxa_set_camera_info(&a780_pxacamera_platform_data);
-		platform_device_register(&a780_camera);
-	}
 
 	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
@@ -1001,6 +1000,15 @@ static struct platform_device a910_gpio_keys = {
 };
 
 /* camera */
+static int a910_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+	return 0;
+}
+
 static int a910_camera_init(void)
 {
 	int err;
@@ -1009,68 +1017,25 @@ static int a910_camera_init(void)
 	 * GPIO50_nCAM_EN is active low
 	 * GPIO28_GEN2_CAM_RST is active on rising edge
 	 */
-	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
-	if (err) {
-		pr_err("%s: Failed to request nCAM_EN\n", __func__);
-		goto fail;
-	}
-
 	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
 	if (err) {
 		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		goto fail_gpio_cam_rst;
+		return err;
 	}
 
-	gpio_direction_output(GPIO50_nCAM_EN, 1);
 	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
-
-	return 0;
-
-fail_gpio_cam_rst:
-	gpio_free(GPIO50_nCAM_EN);
-fail:
-	return err;
-}
-
-static int a910_camera_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO50_nCAM_EN, !on);
-	return 0;
-}
-
-static int a910_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+	a910_camera_reset(NULL);
 
 	return 0;
 }
 
 struct pxacamera_platform_data a910_pxacamera_platform_data = {
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
+		PXA_CAMERA_PCP,
 	.mclk_10khz = 5000,
-};
-
-static struct i2c_board_info a910_camera_i2c_board_info = {
-	I2C_BOARD_INFO("mt9m111", 0x5d),
-};
-
-static struct soc_camera_link a910_iclink = {
-	.bus_id         = 0,
-	.i2c_adapter_id = 0,
-	.board_info     = &a910_camera_i2c_board_info,
-	.power          = a910_camera_power,
-	.reset          = a910_camera_reset,
-};
-
-static struct platform_device a910_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &a910_iclink,
-	},
+	.sensor_i2c_adapter_id = 0,
+	.sensor_i2c_address = 0x5d,
 };
 
 /* leds-lp3944 */
@@ -1122,10 +1087,14 @@ static struct i2c_board_info __initdata a910_i2c_board_info[] = {
 		I2C_BOARD_INFO("lp3944", 0x60),
 		.platform_data = &a910_lp3944_leds,
 	},
+	{
+		I2C_BOARD_INFO("mt9m111", 0x5d),
+	},
 };
 
 static struct platform_device *a910_devices[] __initdata = {
 	&a910_gpio_keys,
+	&camera_supply_dummy_device,
 };
 
 static void __init a910_init(void)
@@ -1145,14 +1114,13 @@ static void __init a910_init(void)
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
-	if (a910_camera_init() == 0) {
+	if (a910_camera_init() == 0)
 		pxa_set_camera_info(&a910_pxacamera_platform_data);
-		platform_device_register(&a910_camera);
-	}
 
 	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ec510ecf8370..cb73a9723d0e 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -43,21 +43,6 @@ void clear_reset_status(unsigned int mask)
 	}
 }
 
-unsigned long get_clock_tick_rate(void)
-{
-	unsigned long clock_tick_rate;
-
-	if (cpu_is_pxa25x())
-		clock_tick_rate = 3686400;
-	else if (machine_is_mainstone())
-		clock_tick_rate = 3249600;
-	else
-		clock_tick_rate = 3250000;
-
-	return clock_tick_rate;
-}
-EXPORT_SYMBOL(get_clock_tick_rate);
-
 /*
  * For non device-tree builds, keep legacy timer init
  */
@@ -69,8 +54,7 @@ void __init pxa_timer_init(void)
 		pxa27x_clocks_init();
 	if (cpu_is_pxa3xx())
 		pxa3xx_clocks_init();
-	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000),
-			    get_clock_tick_rate());
+	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000));
 }
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 8d63c211b22f..55064124ca4e 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -303,8 +303,6 @@
  */
 extern unsigned int get_memclk_frequency_10khz(void);
 
-/* return the clock tick rate of the OS timer */
-extern unsigned long get_clock_tick_rate(void);
 #endif
 
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 38a96a193dc4..8a5d0491e73c 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -57,7 +57,6 @@
 #include <linux/platform_data/media/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/smemc.h>
-#include <media/soc_camera.h>
 
 #include "mioa701.h"
 
@@ -627,6 +626,8 @@ struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
 		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
 	.mclk_10khz = 5000,
+	.sensor_i2c_adapter_id = 0,
+	.sensor_i2c_address = 0x5d,
 };
 
 static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
@@ -643,12 +644,6 @@ static struct i2c_board_info mioa701_i2c_devices[] = {
 	},
 };
 
-static struct soc_camera_link iclink = {
-	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
-	.board_info	= &mioa701_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
 struct i2c_pxa_platform_data i2c_pdata = {
 	.fast_mode = 1,
 };
@@ -684,7 +679,6 @@ MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
 MIO_SIMPLE_DEV(wm9713_acodec,	  "wm9713-codec",   NULL);
 MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
-MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
 
 static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
@@ -696,7 +690,6 @@ static struct platform_device *devices[] __initdata = {
 	&power_dev,
 	&docg3,
 	&gpio_vbus,
-	&mioa701_camera,
 	&mioa701_board,
 };
 
@@ -761,6 +754,7 @@ static void __init mioa701_machine_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
+	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
 	i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
 	pxa_set_i2c_info(&i2c_pdata);
 	pxa27x_set_i2c_power_info(NULL);
@@ -769,6 +763,7 @@ static void __init mioa701_machine_init(void)
 	regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
 				     ARRAY_SIZE(fixed_5v0_consumers),
 				     5000000);
+	regulator_has_full_constraints();
 }
 
 static void mioa701_machine_exit(void)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 12b94357fbc1..c725baf119e1 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -156,7 +156,7 @@ static int __init __init
 pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
 	pxa_dt_irq_init(pxa25x_set_wake);
-	set_handle_irq(ichp_handle_irq);
+	set_handle_irq(icip_handle_irq);
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
index e362f865fcd2..941508585e34 100644
--- a/arch/arm/mach-pxa/pxa_cplds_irqs.c
+++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -120,13 +120,9 @@ static int cplds_probe(struct platform_device *pdev)
 	if (!fpga)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (res) {
-		fpga->irq = (unsigned int)res->start;
-		irqflags = res->flags;
-	}
-	if (!fpga->irq)
-		return -ENODEV;
+	fpga->irq = platform_get_irq(pdev, 0);
+	if (fpga->irq <= 0)
+		return fpga->irq;
 
 	base_irq = platform_get_irq(pdev, 1);
 	if (base_irq < 0)
@@ -142,6 +138,7 @@ static int cplds_probe(struct platform_device *pdev)
 	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
 	writel(0, fpga->base + FPGA_IRQ_SET_CLR);
 
+	irqflags = irq_get_trigger_type(fpga->irq);
 	ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
 			       irqflags, dev_name(&pdev->dev), fpga);
 	if (ret == -ENOSYS)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2c150bfc0cd5..67d66c702574 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -31,7 +31,6 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
-#include <linux/module.h>
 #include <linux/reboot.h>
 #include <linux/memblock.h>