Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...

1 files changed, 45 insertions, 10 deletions

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d9578bc49fdc..bd7cd8b6a286 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -763,14 +763,49 @@ static struct nand_bbt_descr spitz_nand_bbt = {
 	.pattern	= scan_ff_pattern
 };
 
-static struct nand_ecclayout akita_oobinfo = {
-	.oobfree	= { {0x08, 0x09} },
-	.eccbytes	= 24,
-	.eccpos		= {
-			0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
-			0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-			0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
-	},
+static int akita_ooblayout_ecc(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	if (section > 12)
+		return -ERANGE;
+
+	switch (section % 3) {
+	case 0:
+		oobregion->offset = 5;
+		oobregion->length = 1;
+		break;
+
+	case 1:
+		oobregion->offset = 1;
+		oobregion->length = 3;
+		break;
+
+	case 2:
+		oobregion->offset = 6;
+		oobregion->length = 2;
+		break;
+	}
+
+	oobregion->offset += (section / 3) * 0x10;
+
+	return 0;
+}
+
+static int akita_ooblayout_free(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 8;
+	oobregion->length = 9;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops akita_ooblayout_ops = {
+	.ecc = akita_ooblayout_ecc,
+	.free = akita_ooblayout_free,
 };
 
 static struct sharpsl_nand_platform_data spitz_nand_pdata = {
@@ -804,11 +839,11 @@ static void __init spitz_nand_init(void)
 	} else if (machine_is_akita()) {
 		spitz_nand_partitions[1].size = 58 * 1024 * 1024;
 		spitz_nand_bbt.len = 1;
-		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+		spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
 	} else if (machine_is_borzoi()) {
 		spitz_nand_partitions[1].size = 32 * 1024 * 1024;
 		spitz_nand_bbt.len = 1;
-		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+		spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
 	}
 
 	platform_device_register(&spitz_nand_device);