[ARM] Orion: move EHCI/I2C/UART peripheral init into board code

This patch moves initialisation of EHCI/I2C/UART platform devices
from the common orion5x_init() into the board support code.

The rationale behind this is that only the board support code knows
whether certain peripherals have been brought out on the board, and
not initialising peripherals that haven't been brought out is
desirable for example:
- to reduce user confusion (e.g. seeing both 'eth0' and 'eth1'
  appear while there is only one ethernet port on the board); and
- to allow for future power savings (peripherals that have not
  been brought out can be clock gated off entirely).

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Acked-by: Russell King <linux@arm.linux.org.uk>

1 files changed, 15 insertions, 14 deletions

diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 62fd99fc664a..4496ed1cab73 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -241,11 +241,6 @@ static struct mv_sata_platform_data rd88f5182_sata_data = {
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-
-static struct platform_device *rd88f5182_devices[] __initdata = {
-	&rd88f5182_nor_flash,
-};
-
 static void __init rd88f5182_init(void)
 {
 	/*
@@ -254,13 +249,6 @@ static void __init rd88f5182_init(void)
 	orion5x_init();
 
 	/*
-	 * Setup the CPU address decode windows for our devices
-	 */
-	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
-				RD88F5182_NOR_BOOT_SIZE);
-	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
-
-	/*
 	 * Open a special address decode windows for the PCIe WA.
 	 */
 	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
@@ -296,10 +284,23 @@ static void __init rd88f5182_init(void)
 
 	orion5x_gpio_set_valid_pins(0x000000fb);
 
-	platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
-	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
 	orion5x_eth_init(&rd88f5182_eth_data);
+	orion5x_i2c_init();
 	orion5x_sata_init(&rd88f5182_sata_data);
+	orion5x_uart0_init();
+
+	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
+				   RD88F5182_NOR_BOOT_SIZE);
+
+	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
+	platform_device_register(&rd88f5182_nor_flash);
+
+	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
 }
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")