[ARM] omap: Fix IO_ADDRESS() macros

OMAP1_IO_ADDRESS(), OMAP2_IO_ADDRESS() and IO_ADDRESS() returns cookies
for use with __raw_{read|write}* for accessing registers.  Therefore,
these macros should return (void __iomem *) cookies, not integer values.

Doing this improves typechecking, and means we can find those places
where, eg, DMA controllers are incorrectly given virtual addresses to
DMA to, or physical addresses are thrown through a virtual to physical
address translation.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

6 files changed, 16 insertions, 18 deletions

diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 87a44c715aa4..65fdf78c91e1 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -18,7 +18,7 @@
 
 #ifndef __ASSEMBLER__
 #define OMAP_CM_REGADDR(module, reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
+			IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
 #else
 #define OMAP2420_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f51d69bc457d..9b4e58ee2ca2 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -64,10 +64,8 @@ static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned		gpmc_cs_map;
 
-static void __iomem *gpmc_base =
-	(void __iomem *) IO_ADDRESS(GPMC_BASE);
-static void __iomem *gpmc_cs_base =
-	(void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+static void __iomem *gpmc_base = IO_ADDRESS(GPMC_BASE);
+static void __iomem *gpmc_cs_base = IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
 
 static struct clk *gpmc_fck;
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a5d4526ac4d6..e53ebe7d58be 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -21,11 +21,11 @@
 #include <mach/cpu.h>
 
 #if defined(CONFIG_ARCH_OMAP2420)
-#define TAP_BASE	io_p2v(0x48014000)
+#define TAP_BASE	IO_ADDRESS(0x48014000)
 #elif defined(CONFIG_ARCH_OMAP2430)
-#define TAP_BASE	io_p2v(0x4900A000)
+#define TAP_BASE	IO_ADDRESS(0x4900A000)
 #elif defined(CONFIG_ARCH_OMAP34XX)
-#define TAP_BASE	io_p2v(0x4830A000)
+#define TAP_BASE	IO_ADDRESS(0x4830A000)
 #endif
 
 #define OMAP_TAP_IDCODE		0x0204
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 9ef15b31d8fc..742bd0070e63 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -32,7 +32,7 @@
  * for each bank.. when in doubt, consult the TRM.
  */
 static struct omap_irq_bank {
-	unsigned long base_reg;
+	void __iomem *base_reg;
 	unsigned int nr_irqs;
 } __attribute__ ((aligned(4))) irq_banks[] = {
 	{
@@ -94,7 +94,7 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 	unsigned long tmp;
 
 	tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff;
-	printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx "
+	printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
 			 "(revision %ld.%ld) with %d interrupts\n",
 			 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index bbf41fc8e9a9..026d8a776ae6 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -18,7 +18,7 @@
 
 #ifndef __ASSEMBLER__
 #define OMAP_PRM_REGADDR(module, reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
+			IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
 #else
 #define OMAP2420_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index adc8a26a8fb0..7faa53c3a925 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -32,24 +32,24 @@ static struct clk * uart3_fck = NULL;
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= (char *)IO_ADDRESS(OMAP_UART1_BASE),
-		.mapbase	= (unsigned long)OMAP_UART1_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	}, {
-		.membase	= (char *)IO_ADDRESS(OMAP_UART2_BASE),
-		.mapbase	= (unsigned long)OMAP_UART2_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	}, {
-		.membase	= (char *)IO_ADDRESS(OMAP_UART3_BASE),
-		.mapbase	= (unsigned long)OMAP_UART3_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -71,7 +71,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 				    int value)
 {
 	offset <<= p->regshift;
-	__raw_writeb(value, (unsigned long)(p->membase + offset));
+	__raw_writeb(value, p->membase + offset);
 }
 
 /*