summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/msdi.c
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2013-11-25 15:17:11 -0800
committerTony Lindgren <tony@atomide.com>2013-11-25 15:31:17 -0800
commit5a87cde490e1a1a5be5200012bf37a4b25b0f70e (patch)
tree4f6276801085ad113d04aa5bc851ca34e0079459 /arch/arm/mach-omap2/msdi.c
parentfa590c923401368d86db361350849a7bf9f42b8a (diff)
downloadlinux-5a87cde490e1a1a5be5200012bf37a4b25b0f70e.tar.bz2
ARM: OMAP2+: Remove legacy booting support for n8x0
Now we can boot n8x with the appended device tree with: $ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- make omap2420-n800.dtb $ cat arch/arm/boot/zImage arch/arm/boot/dts/omap2420-n800.dtb > /tmp/zImage Note that you need at least the following enabled: CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_PINCTRL=y CONFIG_PINCTRL_SINGLE=y Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2/msdi.c')
-rw-r--r--arch/arm/mach-omap2/msdi.c69
1 files changed, 0 insertions, 69 deletions
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index c52d8b4a3e91..828e0db3d943 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -88,72 +88,3 @@ int omap_msdi_reset(struct omap_hwmod *oh)
return 0;
}
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
- *mmc_controller)
-{
- if ((mmc_controller->slots[0].switch_pin > 0) && \
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
- OMAP_PIN_INPUT_PULLUP);
- if ((mmc_controller->slots[0].gpio_wp > 0) && \
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
- OMAP_PIN_INPUT_PULLUP);
-
- omap_mux_init_signal("sdmmc_cmd", 0);
- omap_mux_init_signal("sdmmc_clki", 0);
- omap_mux_init_signal("sdmmc_clko", 0);
- omap_mux_init_signal("sdmmc_dat0", 0);
- omap_mux_init_signal("sdmmc_dat_dir0", 0);
- omap_mux_init_signal("sdmmc_cmd_dir", 0);
- if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
- omap_mux_init_signal("sdmmc_dat1", 0);
- omap_mux_init_signal("sdmmc_dat2", 0);
- omap_mux_init_signal("sdmmc_dat3", 0);
- omap_mux_init_signal("sdmmc_dat_dir1", 0);
- omap_mux_init_signal("sdmmc_dat_dir2", 0);
- omap_mux_init_signal("sdmmc_dat_dir3", 0);
- }
-
- /*
- * Use internal loop-back in MMC/SDIO Module Input Clock
- * selection
- */
- if (mmc_controller->slots[0].internal_clock) {
- u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- v |= (1 << 24);
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
- }
-}
-
-void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
- struct platform_device *pdev;
- struct omap_hwmod *oh;
- int id = 0;
- char *oh_name = "msdi1";
- char *dev_name = "mmci-omap";
-
- if (!mmc_data[0]) {
- pr_err("%s fails: Incomplete platform data\n", __func__);
- return;
- }
-
- omap242x_mmc_mux(mmc_data[0]);
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return;
- }
- pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
- sizeof(struct omap_mmc_platform_data));
- if (IS_ERR(pdev))
- WARN(1, "Can'd build omap_device for %s:%s.\n",
- dev_name, oh->name);
-}
-
-#endif