Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "We've got a fairly large cleanup branch this time.  The bulk of this
  is removal of non-DT platforms of several flavors:

   - Atmel at91 platforms go full-DT, with removal of remaining
     board-file based support

   - OMAP removes legacy board files for three more platforms

   - removal of non-DT mach-msm, newer Qualcomm platforms now live in
     mach-qcom

   - Freescale i.MX25 also removes non-DT platform support"

Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  ARM: shmobile: cpuidle: Remove the pointless default driver
  ARM: davinci: dm646x: Add interrupt resource for McASPs
  ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
  ARM: davinci: dm646x: Clean up the McASP DMA resources
  ARM: davinci: devices-da8xx: Add support for McASP2 on da830
  ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
  ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
  ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
  ARM: OMAP2+: Remove legacy support for omap3 TouchBook
  ARM: OMAP3: Remove legacy support for devkit8000
  ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
  ARM: shmobile: Consolidate the pm code for R-Car Gen2
  ARM: shmobile: r8a7791: Correct SYSCIER value
  ARM: shmobile: r8a7790: Correct SYSCIER value
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ...

53 files changed, 0 insertions, 8523 deletions

diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
deleted file mode 100644
index a6b50e62a495..000000000000
--- a/arch/arm/mach-msm/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-if ARCH_MSM
-
-choice
-	prompt "Qualcomm MSM SoC Type"
-	default ARCH_MSM7X00A
-	depends on ARCH_MSM
-
-config ARCH_MSM7X00A
-	bool "MSM7x00A / MSM7x01A"
-	select ARCH_MSM_ARM11
-	select CPU_V6
-	select GPIO_MSM_V1
-	select MACH_TROUT if !MACH_HALIBUT
-	select MSM_PROC_COMM
-	select MSM_SMD
-	select CLKSRC_QCOM
-	select MSM_SMD_PKG3
-
-config ARCH_MSM7X30
-	bool "MSM7x30"
-	select ARCH_MSM_SCORPION
-	select CPU_V7
-	select GPIO_MSM_V1
-	select MACH_MSM7X30_SURF # if !
-	select MSM_GPIOMUX
-	select MSM_PROC_COMM
-	select MSM_SMD
-	select CLKSRC_QCOM
-	select MSM_VIC
-
-config ARCH_QSD8X50
-	bool "QSD8X50"
-	select ARCH_MSM_SCORPION
-	select CPU_V7
-	select GPIO_MSM_V1
-	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
-	select MSM_GPIOMUX
-	select MSM_PROC_COMM
-	select MSM_SMD
-	select CLKSRC_QCOM
-	select MSM_VIC
-
-endchoice
-
-config MSM_SOC_REV_A
-	bool
-
-config  ARCH_MSM_ARM11
-	bool
-
-config  ARCH_MSM_SCORPION
-	bool
-
-config  MSM_VIC
-	bool
-
-menu "Qualcomm MSM Board Type"
-	depends on ARCH_MSM
-
-config MACH_HALIBUT
-	depends on ARCH_MSM
-	depends on ARCH_MSM7X00A
-	bool "Halibut Board (QCT SURF7201A)"
-	help
-	  Support for the Qualcomm SURF7201A eval board.
-
-config MACH_TROUT
-	depends on ARCH_MSM
-	depends on ARCH_MSM7X00A
-	bool "HTC Dream (aka trout)"
-	help
-	  Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
-
-config MACH_MSM7X30_SURF
-	depends on ARCH_MSM7X30
-	bool "MSM7x30 SURF"
-	help
-	  Support for the Qualcomm MSM7x30 SURF eval board.
-
-config MACH_QSD8X50_SURF
-	depends on ARCH_QSD8X50
-	bool "QSD8x50 SURF"
-	help
-	  Support for the Qualcomm QSD8x50 SURF eval board.
-
-config MACH_QSD8X50A_ST1_5
-	depends on ARCH_QSD8X50
-	bool "QSD8x50A ST1.5"
-	select MSM_SOC_REV_A
-	help
-	  Support for the Qualcomm ST1.5.
-
-endmenu
-
-config MSM_SMD_PKG3
-	bool
-
-config MSM_PROC_COMM
-	bool
-
-config MSM_SMD
-	bool
-
-config MSM_GPIOMUX
-	bool
-	help
-	  Support for MSM V1 TLMM GPIOMUX architecture.
-
-endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
deleted file mode 100644
index 27c078a568df..000000000000
--- a/arch/arm/mach-msm/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-obj-$(CONFIG_MSM_PROC_COMM) += clock.o
-
-obj-$(CONFIG_MSM_VIC) += irq-vic.o
-
-obj-$(CONFIG_ARCH_MSM7X00A) += irq.o
-obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
-
-obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
-
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o
-obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o
-obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
-
-obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
-obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
-obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
-obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
-obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
-obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
deleted file mode 100644
index 9b803a578b4d..000000000000
--- a/arch/arm/mach-msm/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-  zreladdr-y		+= 0x10008000
-params_phys-y		:= 0x10000100
-initrd_phys-y		:= 0x10800000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
deleted file mode 100644
index fc832040c6e9..000000000000
--- a/arch/arm/mach-msm/board-halibut.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/* linux/arch/arm/mach-msm/board-halibut.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/smc91x.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "common.h"
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x9C004300,
-		.end	= 0x9C004400,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSM_GPIO_TO_INT(49),
-		.end	= MSM_GPIO_TO_INT(49),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev.platform_data = &smc91x_platdata,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_clock_7x01a,
-	&msm_device_gpio_7201,
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_nand,
-	&msm_device_hsusb,
-	&msm_device_i2c,
-	&smc91x_device,
-};
-
-static void __init halibut_init_early(void)
-{
-	arch_ioremap_caller = __msm_ioremap_caller;
-}
-
-static void __init halibut_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init halibut_init(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init halibut_map_io(void)
-{
-	msm_map_common_io();
-}
-
-static void __init halibut_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
-	.atag_offset	= 0x100,
-	.map_io		= halibut_map_io,
-	.init_early	= halibut_init_early,
-	.init_irq	= halibut_init_irq,
-	.init_machine	= halibut_init,
-	.init_late	= halibut_init_late,
-	.init_time	= msm7x01_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
deleted file mode 100644
index 8f5ecdc4f3ce..000000000000
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/usb/msm_hsusb.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/memory.h>
-#include <asm/setup.h>
-
-#include <mach/clk.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-
-#include <mach/vreg.h>
-#include "devices.h"
-#include "gpiomux.h"
-#include "proc_comm.h"
-#include "common.h"
-
-static void __init msm7x30_fixup(struct tag *tag, char **cmdline)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
-			tag->u.mem.start = 0;
-			tag->u.mem.size += SZ_2M;
-		}
-}
-
-static void __init msm7x30_reserve(void)
-{
-	memblock_remove(0x0, SZ_2M);
-}
-
-static int hsusb_phy_init_seq[] = {
-	0x30, 0x32,	/* Enable and set Pre-Emphasis Depth to 20% */
-	0x02, 0x36,	/* Disable CDR Auto Reset feature */
-	-1
-};
-
-static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
-{
-	int ret;
-
-	if (assert) {
-		ret = clk_reset(link_clk, CLK_RESET_ASSERT);
-		if (ret)
-			pr_err("usb hs_clk assert failed\n");
-	} else {
-		ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
-		if (ret)
-			pr_err("usb hs_clk deassert failed\n");
-	}
-	return ret;
-}
-
-static int hsusb_phy_clk_reset(struct clk *phy_clk)
-{
-	int ret;
-
-	ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
-	if (ret) {
-		pr_err("usb phy clk assert failed\n");
-		return ret;
-	}
-	usleep_range(10000, 12000);
-	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
-	if (ret)
-		pr_err("usb phy clk deassert failed\n");
-	return ret;
-}
-
-static struct msm_otg_platform_data msm_otg_pdata = {
-	.phy_init_seq		= hsusb_phy_init_seq,
-	.mode                   = USB_DR_MODE_PERIPHERAL,
-	.otg_control		= OTG_PHY_CONTROL,
-	.link_clk_reset		= hsusb_link_clk_reset,
-	.phy_clk_reset		= hsusb_phy_clk_reset,
-};
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-	[49] = { /* UART2 RFR */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-	[50] = { /* UART2 CTS */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-	[51] = { /* UART2 RX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-	[52] = { /* UART2 TX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-#endif
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_clock_7x30,
-	&msm_device_gpio_7x30,
-#if defined(CONFIG_SERIAL_MSM)
-        &msm_device_uart2,
-#endif
-	&msm_device_smd,
-	&msm_device_otg,
-	&msm_device_hsusb,
-	&msm_device_hsusb_host,
-};
-
-static void __init msm7x30_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init msm7x30_init(void)
-{
-	msm_device_otg.dev.platform_data = &msm_otg_pdata;
-	msm_device_hsusb.dev.parent = &msm_device_otg.dev;
-	msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x30_map_io(void)
-{
-	msm_map_msm7x30_io();
-}
-
-static void __init msm7x30_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
-	.atag_offset = 0x100,
-	.fixup = msm7x30_fixup,
-	.reserve = msm7x30_reserve,
-	.map_io = msm7x30_map_io,
-	.init_irq = msm7x30_init_irq,
-	.init_machine = msm7x30_init,
-	.init_late = msm7x30_init_late,
-	.init_time	= msm7x30_timer_init,
-MACHINE_END
-
-MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
-	.atag_offset = 0x100,
-	.fixup = msm7x30_fixup,
-	.reserve = msm7x30_reserve,
-	.map_io = msm7x30_map_io,
-	.init_irq = msm7x30_init_irq,
-	.init_machine = msm7x30_init,
-	.init_late = msm7x30_init_late,
-	.init_time	= msm7x30_timer_init,
-MACHINE_END
-
-MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
-	.atag_offset = 0x100,
-	.fixup = msm7x30_fixup,
-	.reserve = msm7x30_reserve,
-	.map_io = msm7x30_map_io,
-	.init_irq = msm7x30_init_irq,
-	.init_machine = msm7x30_init,
-	.init_late = msm7x30_init_late,
-	.init_time	= msm7x30_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
deleted file mode 100644
index 10016a3bc698..000000000000
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/usb/msm_hsusb.h>
-#include <linux/err.h>
-#include <linux/clkdev.h>
-#include <linux/smc91x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-
-#include <mach/irqs.h>
-#include <mach/sirc.h>
-#include <mach/vreg.h>
-#include <mach/clk.h>
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-#include "devices.h"
-#include "common.h"
-
-static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300;
-static const unsigned        qsd8x50_surf_smc91x_gpio __initconst = 156;
-
-/* Leave smc91x resources empty here, as we'll fill them in
- * at run-time: they vary from board to board, and the true
- * configuration won't be known until boot.
- */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-	.dev.platform_data = &smc91x_platdata,
-};
-
-static int __init msm_init_smc91x(void)
-{
-	if (machine_is_qsd8x50_surf()) {
-		smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
-		smc91x_resources[0].end   = qsd8x50_surf_smc91x_base + 0xff;
-		smc91x_resources[1].start =
-			gpio_to_irq(qsd8x50_surf_smc91x_gpio);
-		smc91x_resources[1].end   =
-			gpio_to_irq(qsd8x50_surf_smc91x_gpio);
-		platform_device_register(&smc91x_device);
-	}
-
-	return 0;
-}
-module_init(msm_init_smc91x);
-
-static int hsusb_phy_init_seq[] = {
-	0x08, 0x31,	/* Increase HS Driver Amplitude */
-	0x20, 0x32,	/* Enable and set Pre-Emphasis Depth to 10% */
-	-1
-};
-
-static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
-{
-	int ret;
-
-	if (assert) {
-		ret = clk_reset(link_clk, CLK_RESET_ASSERT);
-		if (ret)
-			pr_err("usb hs_clk assert failed\n");
-	} else {
-		ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
-		if (ret)
-			pr_err("usb hs_clk deassert failed\n");
-	}
-	return ret;
-}
-
-static int hsusb_phy_clk_reset(struct clk *phy_clk)
-{
-	int ret;
-
-	ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
-	if (ret) {
-		pr_err("usb phy clk assert failed\n");
-		return ret;
-	}
-	usleep_range(10000, 12000);
-	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
-	if (ret)
-		pr_err("usb phy clk deassert failed\n");
-	return ret;
-}
-
-static struct msm_otg_platform_data msm_otg_pdata = {
-	.phy_init_seq		= hsusb_phy_init_seq,
-	.mode                   = USB_DR_MODE_PERIPHERAL,
-	.otg_control		= OTG_PHY_CONTROL,
-	.link_clk_reset		= hsusb_link_clk_reset,
-	.phy_clk_reset		= hsusb_phy_clk_reset,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_clock_8x50,
-	&msm_device_gpio_8x50,
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_otg,
-	&msm_device_hsusb,
-	&msm_device_hsusb_host,
-};
-
-static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
-	{51, "sdc1_dat_3"},
-	{52, "sdc1_dat_2"},
-	{53, "sdc1_dat_1"},
-	{54, "sdc1_dat_0"},
-	{55, "sdc1_cmd"},
-	{56, "sdc1_clk"}
-};
-
-static struct vreg *vreg_mmc;
-static unsigned long vreg_sts;
-
-static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
-{
-	int rc = 0;
-	struct platform_device *pdev;
-
-	pdev = container_of(dv, struct platform_device, dev);
-
-	if (vdd == 0) {
-		if (!vreg_sts)
-			return 0;
-
-		clear_bit(pdev->id, &vreg_sts);
-
-		if (!vreg_sts) {
-			rc = vreg_disable(vreg_mmc);
-			if (rc)
-				pr_err("vreg_mmc disable failed for slot "
-						"%d: %d\n", pdev->id, rc);
-		}
-		return 0;
-	}
-
-	if (!vreg_sts) {
-		rc = vreg_set_level(vreg_mmc, 2900);
-		if (rc)
-			pr_err("vreg_mmc set level failed for slot %d: %d\n",
-					pdev->id, rc);
-		rc = vreg_enable(vreg_mmc);
-		if (rc)
-			pr_err("vreg_mmc enable failed for slot %d: %d\n",
-					pdev->id, rc);
-	}
-	set_bit(pdev->id, &vreg_sts);
-	return 0;
-}
-
-static struct msm_mmc_gpio_data sdc1_gpio = {
-	.gpio = sdc1_gpio_cfg,
-	.size = ARRAY_SIZE(sdc1_gpio_cfg),
-};
-
-static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
-	.ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
-	.translate_vdd	= msm_sdcc_setup_power,
-	.gpio_data = &sdc1_gpio,
-};
-
-static void __init qsd8x50_init_mmc(void)
-{
-	vreg_mmc = vreg_get(NULL, "gp5");
-
-	if (IS_ERR(vreg_mmc)) {
-		pr_err("vreg get for vreg_mmc failed (%ld)\n",
-				PTR_ERR(vreg_mmc));
-		return;
-	}
-
-	msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
-}
-
-static void __init qsd8x50_map_io(void)
-{
-	msm_map_qsd8x50_io();
-}
-
-static void __init qsd8x50_init_irq(void)
-{
-	msm_init_irq();
-	msm_init_sirc();
-}
-
-static void __init qsd8x50_init(void)
-{
-	msm_device_otg.dev.platform_data = &msm_otg_pdata;
-	msm_device_hsusb.dev.parent = &msm_device_otg.dev;
-	msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	qsd8x50_init_mmc();
-}
-
-static void __init qsd8x50_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
-	.atag_offset = 0x100,
-	.map_io = qsd8x50_map_io,
-	.init_irq = qsd8x50_init_irq,
-	.init_machine = qsd8x50_init,
-	.init_late = qsd8x50_init_late,
-	.init_time	= qsd8x50_timer_init,
-MACHINE_END
-
-MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
-	.atag_offset = 0x100,
-	.map_io = qsd8x50_map_io,
-	.init_irq = qsd8x50_init_irq,
-	.init_machine = qsd8x50_init,
-	.init_late = qsd8x50_init_late,
-	.init_time	= qsd8x50_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
deleted file mode 100644
index e50967926dcd..000000000000
--- a/arch/arm/mach-msm/board-sapphire.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* linux/arch/arm/mach-msm/board-sapphire.c
- * Copyright (C) 2007-2009 HTC Corporation.
- * Author: Thomas Tsai <thomas_tsai@htc.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <mach/vreg.h>
-
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/setup.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/memblock.h>
-
-#include "gpio_chip.h"
-#include "board-sapphire.h"
-#include "proc_comm.h"
-#include "devices.h"
-#include "common.h"
-
-void msm_init_irq(void);
-void msm_init_gpio(void);
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_smd,
-	&msm_device_dmov,
-	&msm_device_nand,
-	&msm_device_uart1,
-	&msm_device_uart3,
-};
-
-void msm_timer_init(void);
-
-static void __init sapphire_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init sapphire_init(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static struct map_desc sapphire_io_desc[] __initdata = {
-	{
-		.virtual = SAPPHIRE_CPLD_BASE,
-		.pfn     = __phys_to_pfn(SAPPHIRE_CPLD_START),
-		.length  = SAPPHIRE_CPLD_SIZE,
-		.type    = MT_DEVICE_NONSHARED
-	}
-};
-
-static void __init sapphire_fixup(struct tag *tags, char **cmdline)
-{
-	int smi_sz = parse_tag_smi((const struct tag *)tags);
-
-	if (smi_sz == 32) {
-		memblock_add(PHYS_OFFSET, 84*SZ_1M);
-	} else if (smi_sz == 64) {
-		memblock_add(PHYS_OFFSET, 101*SZ_1M);
-	} else {
-		memblock_add(PHYS_OFFSET, 101*SZ_1M);
-		/* Give a default value when not get smi size */
-		smi_sz = 64;
-	}
-}
-
-static void __init sapphire_map_io(void)
-{
-	msm_map_common_io();
-	iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc));
-	msm_clock_init();
-}
-
-static void __init sapphire_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(SAPPHIRE, "sapphire")
-/* Maintainer: Brian Swetland <swetland@google.com> */
-	.atag_offset    = 0x100,
-	.fixup          = sapphire_fixup,
-	.map_io         = sapphire_map_io,
-	.init_irq       = sapphire_init_irq,
-	.init_machine   = sapphire_init,
-	.init_late      = sapphire_init_late,
-	.init_time	= msm_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
deleted file mode 100644
index 722ad63b7edc..000000000000
--- a/arch/arm/mach-msm/board-trout-gpio.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * linux/arch/arm/mach-msm/gpio.c
- *
- * Copyright (C) 2005 HP Labs
- * Copyright (C) 2008 Google, Inc.
- * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include "board-trout.h"
-
-static uint8_t trout_int_mask[2] = {
-	[0] = 0xff, /* mask all interrupts */
-	[1] = 0xff,
-};
-static uint8_t trout_sleep_int_mask[] = {
-	[0] = 0xff,
-	[1] = 0xff,
-};
-
-struct msm_gpio_chip {
-	struct gpio_chip	chip;
-	void __iomem		*reg;	/* Base of register bank */
-	u8			shadow;
-};
-
-#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
-
-static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
-	unsigned mask = 1 << offset;
-
-	return !!(readb(msm_gpio->reg) & mask);
-}
-
-static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
-	unsigned mask = 1 << offset;
-
-	if (val)
-		msm_gpio->shadow |= mask;
-	else
-		msm_gpio->shadow &= ~mask;
-
-	writeb(msm_gpio->shadow, msm_gpio->reg);
-}
-
-static int msm_gpiolib_direction_input(struct gpio_chip *chip,
-					unsigned offset)
-{
-	msm_gpiolib_set(chip, offset, 0);
-	return 0;
-}
-
-static int msm_gpiolib_direction_output(struct gpio_chip *chip,
-					 unsigned offset, int val)
-{
-	msm_gpiolib_set(chip, offset, val);
-	return 0;
-}
-
-static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	return TROUT_GPIO_TO_INT(offset + chip->base);
-}
-
-#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val)		\
-	{								\
-		.chip = {						\
-			.label		  = name,			\
-			.direction_input  = msm_gpiolib_direction_input,\
-			.direction_output = msm_gpiolib_direction_output, \
-			.get		  = msm_gpiolib_get,		\
-			.set		  = msm_gpiolib_set,		\
-			.to_irq		  = trout_gpio_to_irq,		\
-			.base		  = base_gpio,			\
-			.ngpio		  = 8,				\
-		},							\
-		.reg = reg_num + TROUT_CPLD_BASE,			\
-		.shadow = shadow_val,					\
-	}
-
-static struct msm_gpio_chip msm_gpio_banks[] = {
-#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9a00000)
-	/* H2W pins <-> UART1 */
-	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x40),
-#else
-	/* H2W pins <-> UART3, Bluetooth <-> UART1 */
-	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x80),
-#endif
-	/* I2C pull */
-	TROUT_GPIO_BANK("MISC3", 0x02,   TROUT_GPIO_MISC3_BASE, 0x04),
-	TROUT_GPIO_BANK("MISC4", 0x04,   TROUT_GPIO_MISC4_BASE, 0),
-	/* mmdi 32k en */
-	TROUT_GPIO_BANK("MISC5", 0x06,   TROUT_GPIO_MISC5_BASE, 0x04),
-	TROUT_GPIO_BANK("INT2", 0x08,    TROUT_GPIO_INT2_BASE,  0),
-	TROUT_GPIO_BANK("MISC1", 0x0a,   TROUT_GPIO_MISC1_BASE, 0),
-	TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
-};
-
-static void trout_gpio_irq_ack(struct irq_data *d)
-{
-	int bank = TROUT_INT_TO_BANK(d->irq);
-	uint8_t mask = TROUT_INT_TO_MASK(d->irq);
-	int reg = TROUT_BANK_TO_STAT_REG(bank);
-	/*printk(KERN_INFO "trout_gpio_irq_ack irq %d\n", d->irq);*/
-	writeb(mask, TROUT_CPLD_BASE + reg);
-}
-
-static void trout_gpio_irq_mask(struct irq_data *d)
-{
-	unsigned long flags;
-	uint8_t reg_val;
-	int bank = TROUT_INT_TO_BANK(d->irq);
-	uint8_t mask = TROUT_INT_TO_MASK(d->irq);
-	int reg = TROUT_BANK_TO_MASK_REG(bank);
-
-	local_irq_save(flags);
-	reg_val = trout_int_mask[bank] |= mask;
-	/*printk(KERN_INFO "trout_gpio_irq_mask irq %d => %d:%02x\n",
-	       d->irq, bank, reg_val);*/
-	writeb(reg_val, TROUT_CPLD_BASE + reg);
-	local_irq_restore(flags);
-}
-
-static void trout_gpio_irq_unmask(struct irq_data *d)
-{
-	unsigned long flags;
-	uint8_t reg_val;
-	int bank = TROUT_INT_TO_BANK(d->irq);
-	uint8_t mask = TROUT_INT_TO_MASK(d->irq);
-	int reg = TROUT_BANK_TO_MASK_REG(bank);
-
-	local_irq_save(flags);
-	reg_val = trout_int_mask[bank] &= ~mask;
-	/*printk(KERN_INFO "trout_gpio_irq_unmask irq %d => %d:%02x\n",
-	       d->irq, bank, reg_val);*/
-	writeb(reg_val, TROUT_CPLD_BASE + reg);
-	local_irq_restore(flags);
-}
-
-int trout_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned long flags;
-	int bank = TROUT_INT_TO_BANK(d->irq);
-	uint8_t mask = TROUT_INT_TO_MASK(d->irq);
-
-	local_irq_save(flags);
-	if(on)
-		trout_sleep_int_mask[bank] &= ~mask;
-	else
-		trout_sleep_int_mask[bank] |= mask;
-	local_irq_restore(flags);
-	return 0;
-}
-
-static void trout_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int j, m;
-	unsigned v;
-	int bank;
-	int stat_reg;
-	int int_base = TROUT_INT_START;
-	uint8_t int_mask;
-
-	for (bank = 0; bank < 2; bank++) {
-		stat_reg = TROUT_BANK_TO_STAT_REG(bank);
-		v = readb(TROUT_CPLD_BASE + stat_reg);
-		int_mask = trout_int_mask[bank];
-		if (v & int_mask) {
-			writeb(v & int_mask, TROUT_CPLD_BASE + stat_reg);
-			printk(KERN_ERR "trout_gpio_irq_handler: got masked "
-			       "interrupt: %d:%02x\n", bank, v & int_mask);
-		}
-		v &= ~int_mask;
-		while (v) {
-			m = v & -v;
-			j = fls(m) - 1;
-			/*printk(KERN_INFO "msm_gpio_irq_handler %d:%02x %02x b"
-			       "it %d irq %d\n", bank, v, m, j, int_base + j);*/
-			v &= ~m;
-			generic_handle_irq(int_base + j);
-		}
-		int_base += TROUT_INT_BANK0_COUNT;
-	}
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static struct irq_chip trout_gpio_irq_chip = {
-	.name          = "troutgpio",
-	.irq_ack       = trout_gpio_irq_ack,
-	.irq_mask      = trout_gpio_irq_mask,
-	.irq_unmask    = trout_gpio_irq_unmask,
-	.irq_set_wake  = trout_gpio_irq_set_wake,
-};
-
-/*
- * Called from the processor-specific init to enable GPIO pin support.
- */
-int __init trout_init_gpio(void)
-{
-	int i;
-	for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) {
-		irq_set_chip_and_handler(i, &trout_gpio_irq_chip,
-					 handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
-		gpiochip_add(&msm_gpio_banks[i].chip);
-
-	irq_set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH);
-	irq_set_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler);
-	irq_set_irq_wake(MSM_GPIO_TO_INT(17), 1);
-
-	return 0;
-}
-
-postcore_initcall(trout_init_gpio);
-
diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c
deleted file mode 100644
index 3723e55819d6..000000000000
--- a/arch/arm/mach-msm/board-trout-mmc.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout-mmc.c
-** Author: Brian Swetland <swetland@google.com>
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sdio_ids.h>
-#include <linux/err.h>
-#include <linux/debugfs.h>
-
-#include <asm/io.h>
-
-#include <mach/vreg.h>
-
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-#include "devices.h"
-
-#include "board-trout.h"
-
-#include "proc_comm.h"
-
-#define DEBUG_SDSLOT_VDD 1
-
-/* ---- COMMON ---- */
-static void config_gpio_table(uint32_t *table, int len)
-{
-	int n;
-	unsigned id;
-	for(n = 0; n < len; n++) {
-		id = table[n];
-		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0);
-	}
-}
-
-/* ---- SDCARD ---- */
-
-static uint32_t sdcard_on_gpio_table[] = {
-	PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */
-	PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */
-	PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */
-	PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */
-	PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */
-	PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */
-};
-
-static uint32_t sdcard_off_gpio_table[] = {
-	PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */
-	PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */
-	PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */
-	PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */
-	PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */
-	PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */
-};
-
-static uint opt_disable_sdcard;
-
-static int __init trout_disablesdcard_setup(char *str)
-{
-	int cal = simple_strtol(str, NULL, 0);
-	
-	opt_disable_sdcard = cal;
-	return 1;
-}
-
-__setup("board_trout.disable_sdcard=", trout_disablesdcard_setup);
-
-static struct vreg *vreg_sdslot;	/* SD slot power */
-
-struct mmc_vdd_xlat {
-	int mask;
-	int level;
-};
-
-static struct mmc_vdd_xlat mmc_vdd_table[] = {
-	{ MMC_VDD_165_195,	1800 },
-	{ MMC_VDD_20_21,	2050 },
-	{ MMC_VDD_21_22,	2150 },
-	{ MMC_VDD_22_23,	2250 },
-	{ MMC_VDD_23_24,	2350 },
-	{ MMC_VDD_24_25,	2450 },
-	{ MMC_VDD_25_26,	2550 },
-	{ MMC_VDD_26_27,	2650 },
-	{ MMC_VDD_27_28,	2750 },
-	{ MMC_VDD_28_29,	2850 },
-	{ MMC_VDD_29_30,	2950 },
-};
-
-static unsigned int sdslot_vdd = 0xffffffff;
-static unsigned int sdslot_vreg_enabled;
-
-static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd)
-{
-	int i, rc;
-
-	BUG_ON(!vreg_sdslot);
-
-	if (vdd == sdslot_vdd)
-		return 0;
-
-	sdslot_vdd = vdd;
-
-	if (vdd == 0) {
-#if DEBUG_SDSLOT_VDD
-		printk("%s: Disabling SD slot power\n", __func__);
-#endif
-		config_gpio_table(sdcard_off_gpio_table,
-				  ARRAY_SIZE(sdcard_off_gpio_table));
-		vreg_disable(vreg_sdslot);
-		sdslot_vreg_enabled = 0;
-		return 0;
-	}
-
-	if (!sdslot_vreg_enabled) {
-		rc = vreg_enable(vreg_sdslot);
-		if (rc) {
-			printk(KERN_ERR "%s: Error enabling vreg (%d)\n",
-			       __func__, rc);
-		}
-		config_gpio_table(sdcard_on_gpio_table,
-				  ARRAY_SIZE(sdcard_on_gpio_table));
-		sdslot_vreg_enabled = 1;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) {
-		if (mmc_vdd_table[i].mask == (1 << vdd)) {
-#if DEBUG_SDSLOT_VDD
-			printk("%s: Setting level to %u\n",
-			        __func__, mmc_vdd_table[i].level);
-#endif
-			rc = vreg_set_level(vreg_sdslot,
-					    mmc_vdd_table[i].level);
-			if (rc) {
-				printk(KERN_ERR
-				       "%s: Error setting vreg level (%d)\n",
-				       __func__, rc);
-			}
-			return 0;
-		}
-	}
-
-	printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd);
-	return 0;
-}
-
-static unsigned int trout_sdslot_status(struct device *dev)
-{
-	unsigned int status;
-
-	status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N);
-	return (!status);
-}
-
-#define TROUT_MMC_VDD	MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \
-			| MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \
-			| MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \
-			| MMC_VDD_28_29 | MMC_VDD_29_30
-
-static struct msm_mmc_platform_data trout_sdslot_data = {
-	.ocr_mask	= TROUT_MMC_VDD,
-	.status		= trout_sdslot_status,
-	.translate_vdd	= trout_sdslot_switchvdd,
-};
-
-int __init trout_init_mmc(unsigned int sys_rev)
-{
-	sdslot_vreg_enabled = 0;
-
-	vreg_sdslot = vreg_get(0, "gp6");
-	if (IS_ERR(vreg_sdslot))
-		return PTR_ERR(vreg_sdslot);
-
-	irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1);
-
-	if (!opt_disable_sdcard)
-		msm_add_sdcc(2, &trout_sdslot_data,
-			     TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0);
-	else
-		printk(KERN_INFO "trout: SD-Card interface disabled\n");
-	return 0;
-}
-
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
deleted file mode 100644
index 77b0a26f897f..000000000000
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout-mddi.c
-** Author: Brian Swetland <swetland@google.com>
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/system_info.h>
-
-#include <linux/platform_data/video-msm_fb.h>
-#include <mach/vreg.h>
-
-#include "board-trout.h"
-#include "proc_comm.h"
-#include "clock-pcom.h"
-#include "devices.h"
-
-#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
-
-#define MDDI_CLIENT_CORE_BASE  0x108000
-#define LCD_CONTROL_BLOCK_BASE 0x110000
-#define SPI_BLOCK_BASE         0x120000
-#define I2C_BLOCK_BASE         0x130000
-#define PWM_BLOCK_BASE         0x140000
-#define GPIO_BLOCK_BASE        0x150000
-#define SYSTEM_BLOCK1_BASE     0x160000
-#define SYSTEM_BLOCK2_BASE     0x170000
-
-
-#define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
-#define	SYSCLKENA   (MDDI_CLIENT_CORE_BASE|0x2C)
-#define	PWM0OFF	      (PWM_BLOCK_BASE|0x1C)
-
-#define V_VDDE2E_VDD2_GPIO 0
-#define MDDI_RST_N 82
-
-#define	MDDICAP0    (MDDI_CLIENT_CORE_BASE|0x00)
-#define	MDDICAP1    (MDDI_CLIENT_CORE_BASE|0x04)
-#define	MDDICAP2    (MDDI_CLIENT_CORE_BASE|0x08)
-#define	MDDICAP3    (MDDI_CLIENT_CORE_BASE|0x0C)
-#define	MDCAPCHG    (MDDI_CLIENT_CORE_BASE|0x10)
-#define	MDCRCERC    (MDDI_CLIENT_CORE_BASE|0x14)
-#define	TTBUSSEL    (MDDI_CLIENT_CORE_BASE|0x18)
-#define	DPSET0      (MDDI_CLIENT_CORE_BASE|0x1C)
-#define	DPSET1      (MDDI_CLIENT_CORE_BASE|0x20)
-#define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
-#define	DPRUN       (MDDI_CLIENT_CORE_BASE|0x28)
-#define	SYSCKENA    (MDDI_CLIENT_CORE_BASE|0x2C)
-#define	TESTMODE    (MDDI_CLIENT_CORE_BASE|0x30)
-#define	FIFOMONI    (MDDI_CLIENT_CORE_BASE|0x34)
-#define	INTMONI     (MDDI_CLIENT_CORE_BASE|0x38)
-#define	MDIOBIST    (MDDI_CLIENT_CORE_BASE|0x3C)
-#define	MDIOPSET    (MDDI_CLIENT_CORE_BASE|0x40)
-#define	BITMAP0     (MDDI_CLIENT_CORE_BASE|0x44)
-#define	BITMAP1     (MDDI_CLIENT_CORE_BASE|0x48)
-#define	BITMAP2     (MDDI_CLIENT_CORE_BASE|0x4C)
-#define	BITMAP3     (MDDI_CLIENT_CORE_BASE|0x50)
-#define	BITMAP4     (MDDI_CLIENT_CORE_BASE|0x54)
-
-#define	SRST        (LCD_CONTROL_BLOCK_BASE|0x00)
-#define	PORT_ENB    (LCD_CONTROL_BLOCK_BASE|0x04)
-#define	START       (LCD_CONTROL_BLOCK_BASE|0x08)
-#define	PORT        (LCD_CONTROL_BLOCK_BASE|0x0C)
-#define	CMN         (LCD_CONTROL_BLOCK_BASE|0x10)
-#define	GAMMA       (LCD_CONTROL_BLOCK_BASE|0x14)
-#define	INTFLG      (LCD_CONTROL_BLOCK_BASE|0x18)
-#define	INTMSK      (LCD_CONTROL_BLOCK_BASE|0x1C)
-#define	MPLFBUF     (LCD_CONTROL_BLOCK_BASE|0x20)
-#define	HDE_LEFT    (LCD_CONTROL_BLOCK_BASE|0x24)
-#define	VDE_TOP     (LCD_CONTROL_BLOCK_BASE|0x28)
-#define	PXL         (LCD_CONTROL_BLOCK_BASE|0x30)
-#define	HCYCLE      (LCD_CONTROL_BLOCK_BASE|0x34)
-#define	HSW         (LCD_CONTROL_BLOCK_BASE|0x38)
-#define	HDE_START   (LCD_CONTROL_BLOCK_BASE|0x3C)
-#define	HDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x40)
-#define	VCYCLE      (LCD_CONTROL_BLOCK_BASE|0x44)
-#define	VSW         (LCD_CONTROL_BLOCK_BASE|0x48)
-#define	VDE_START   (LCD_CONTROL_BLOCK_BASE|0x4C)
-#define	VDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x50)
-#define	WAKEUP      (LCD_CONTROL_BLOCK_BASE|0x54)
-#define	WSYN_DLY    (LCD_CONTROL_BLOCK_BASE|0x58)
-#define	REGENB      (LCD_CONTROL_BLOCK_BASE|0x5C)
-#define	VSYNIF      (LCD_CONTROL_BLOCK_BASE|0x60)
-#define	WRSTB       (LCD_CONTROL_BLOCK_BASE|0x64)
-#define	RDSTB       (LCD_CONTROL_BLOCK_BASE|0x68)
-#define	ASY_DATA    (LCD_CONTROL_BLOCK_BASE|0x6C)
-#define	ASY_DATB    (LCD_CONTROL_BLOCK_BASE|0x70)
-#define	ASY_DATC    (LCD_CONTROL_BLOCK_BASE|0x74)
-#define	ASY_DATD    (LCD_CONTROL_BLOCK_BASE|0x78)
-#define	ASY_DATE    (LCD_CONTROL_BLOCK_BASE|0x7C)
-#define	ASY_DATF    (LCD_CONTROL_BLOCK_BASE|0x80)
-#define	ASY_DATG    (LCD_CONTROL_BLOCK_BASE|0x84)
-#define	ASY_DATH    (LCD_CONTROL_BLOCK_BASE|0x88)
-#define	ASY_CMDSET  (LCD_CONTROL_BLOCK_BASE|0x8C)
-
-#define	SSICTL      (SPI_BLOCK_BASE|0x00)
-#define	SSITIME     (SPI_BLOCK_BASE|0x04)
-#define	SSITX       (SPI_BLOCK_BASE|0x08)
-#define	SSIRX       (SPI_BLOCK_BASE|0x0C)
-#define	SSIINTC     (SPI_BLOCK_BASE|0x10)
-#define	SSIINTS     (SPI_BLOCK_BASE|0x14)
-#define	SSIDBG1     (SPI_BLOCK_BASE|0x18)
-#define	SSIDBG2     (SPI_BLOCK_BASE|0x1C)
-#define	SSIID       (SPI_BLOCK_BASE|0x20)
-
-#define	WKREQ       (SYSTEM_BLOCK1_BASE|0x00)
-#define	CLKENB      (SYSTEM_BLOCK1_BASE|0x04)
-#define	DRAMPWR     (SYSTEM_BLOCK1_BASE|0x08)
-#define	INTMASK     (SYSTEM_BLOCK1_BASE|0x0C)
-#define	GPIOSEL     (SYSTEM_BLOCK2_BASE|0x00)
-
-#define	GPIODATA    (GPIO_BLOCK_BASE|0x00)
-#define	GPIODIR     (GPIO_BLOCK_BASE|0x04)
-#define	GPIOIS      (GPIO_BLOCK_BASE|0x08)
-#define	GPIOIBE     (GPIO_BLOCK_BASE|0x0C)
-#define	GPIOIEV     (GPIO_BLOCK_BASE|0x10)
-#define	GPIOIE      (GPIO_BLOCK_BASE|0x14)
-#define	GPIORIS     (GPIO_BLOCK_BASE|0x18)
-#define	GPIOMIS     (GPIO_BLOCK_BASE|0x1C)
-#define	GPIOIC      (GPIO_BLOCK_BASE|0x20)
-#define	GPIOOMS     (GPIO_BLOCK_BASE|0x24)
-#define	GPIOPC      (GPIO_BLOCK_BASE|0x28)
-#define	GPIOID      (GPIO_BLOCK_BASE|0x30)
-
-#define SPI_WRITE(reg, val) \
-	{ SSITX,        0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
-	{ 0, 5 },
-
-#define SPI_WRITE1(reg) \
-	{ SSITX,        (reg) & 0xff }, \
-	{ 0, 5 },
-
-struct mddi_table {
-	uint32_t reg;
-	uint32_t value;
-};
-static struct mddi_table mddi_toshiba_init_table[] = {
-	{ DPSET0,       0x09e90046 },
-	{ DPSET1,       0x00000118 },
-	{ DPSUS,        0x00000000 },
-	{ DPRUN,        0x00000001 },
-	{ 1,            14         }, /* msleep 14 */
-	{ SYSCKENA,     0x00000001 },
-	{ CLKENB,       0x0000A1EF },  /*    # SYS.CLKENB  # Enable clocks for each module (without DCLK , i2cCLK) */
-
-	{ GPIODATA,     0x02000200 },  /*   # GPI .GPIODATA  # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
-	{ GPIODIR,      0x000030D  },  /* 24D   # GPI .GPIODIR  # Select direction of GPIO port (0,2,3,6,9 output) */
-	{ GPIOSEL,      0/*0x00000173*/},  /*   # SYS.GPIOSEL  # GPIO port multiplexing control */
-	{ GPIOPC,       0x03C300C0 },  /*   # GPI .GPIOPC  # GPIO2,3 PD cut */
-	{ WKREQ,        0x00000000 },  /*   # SYS.WKREQ  # Wake-up request event is VSYNC alignment */
-
-	{ GPIOIBE,      0x000003FF },
-	{ GPIOIS,       0x00000000 },
-	{ GPIOIC,       0x000003FF },
-	{ GPIOIE,       0x00000000 },
-
-	{ GPIODATA,     0x00040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
-	{ 1,            1          }, /* msleep 1 */
-	{ GPIODATA,     0x02040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
-	{ DRAMPWR,      0x00000001 }, /* eDRAM power */
-};
-
-#define GPIOSEL_VWAKEINT (1U << 0)
-#define INTMASK_VWAKEOUT (1U << 0)
-
-
-static int trout_new_backlight = 1;
-static struct vreg *vreg_mddi_1v5;
-static struct vreg *vreg_lcm_2v85;
-
-static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
-				     struct mddi_table *table, size_t count)
-{
-	int i;
-	for (i = 0; i < count; i++) {
-		uint32_t reg = table[i].reg;
-		uint32_t value = table[i].value;
-
-		if (reg == 0)
-			udelay(value);
-		else if (reg == 1)
-			msleep(value);
-		else
-			client_data->remote_write(client_data, value, reg);
-	}
-}
-
-static int trout_mddi_toshiba_client_init(
-	struct msm_mddi_bridge_platform_data *bridge_data,
-	struct msm_mddi_client_data *client_data)
-{
-	int panel_id;
-
-	client_data->auto_hibernate(client_data, 0);
-	trout_process_mddi_table(client_data, mddi_toshiba_init_table,
-				 ARRAY_SIZE(mddi_toshiba_init_table));
-	client_data->auto_hibernate(client_data, 1);
-	panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
-	if (panel_id > 1) {
-		printk(KERN_WARNING "unknown panel id at mddi_enable\n");
-		return -1;
-	}
-	return 0;
-}
-
-static int trout_mddi_toshiba_client_uninit(
-	struct msm_mddi_bridge_platform_data *bridge_data,
-	struct msm_mddi_client_data *client_data)
-{
-	return 0;
-}
-
-static struct resource resources_msm_fb[] = {
-	{
-		.start = MSM_FB_BASE,
-		.end = MSM_FB_BASE + MSM_FB_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct msm_mddi_bridge_platform_data toshiba_client_data = {
-	.init = trout_mddi_toshiba_client_init,
-	.uninit = trout_mddi_toshiba_client_uninit,
-	.fb_data = {
-		.xres = 320,
-		.yres = 480,
-		.width = 45,
-		.height = 67,
-		.output_format = 0,
-	},
-};
-
-static struct msm_mddi_platform_data mddi_pdata = {
-	.clk_rate = 122880000,
-	.fb_resource = resources_msm_fb,
-	.num_clients = 1,
-	.client_platform_data = {
-		{
-			.product_id = (0xd263 << 16 | 0),
-			.name = "mddi_c_d263_0000",
-			.id = 0,
-			.client_data = &toshiba_client_data,
-			.clk_rate = 0,
-		},
-	},
-};
-
-int __init trout_init_panel(void)
-{
-	int rc;
-
-	if (!machine_is_trout())
-		return 0;
-	vreg_mddi_1v5 = vreg_get(0, "gp2");
-	if (IS_ERR(vreg_mddi_1v5))
-		return PTR_ERR(vreg_mddi_1v5);
-	vreg_lcm_2v85 = vreg_get(0, "gp4");
-	if (IS_ERR(vreg_lcm_2v85))
-		return PTR_ERR(vreg_lcm_2v85);
-
-	trout_new_backlight = system_rev >= 5;
-	if (trout_new_backlight) {
-		uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
-						GPIO_NO_PULL, GPIO_8MA);
-		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
-	} else {
-		uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
-						GPIO_NO_PULL, GPIO_8MA);
-		uint32_t id = P_GP_CLK;
-		uint32_t rate = 19200000;
-
-		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
-
-		msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
-		if (id < 0)
-			pr_err("trout_init_panel: set clock rate failed\n");
-	}
-
-	rc = platform_device_register(&msm_device_mdp);
-	if (rc)
-		return rc;
-	msm_device_mddi0.dev.platform_data = &mddi_pdata;
-	return platform_device_register(&msm_device_mddi0);
-}
-
-device_initcall(trout_init_panel);
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
deleted file mode 100644
index ba3edd3a46cb..000000000000
--- a/arch/arm/mach-msm/board-trout.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout.c
- *
- * Copyright (C) 2009 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-
-#include <mach/hardware.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-#include "board-trout.h"
-#include "common.h"
-
-extern int trout_init_mmc(unsigned int);
-
-static struct platform_device *devices[] __initdata = {
-	&msm_clock_7x01a,
-	&msm_device_gpio_7201,
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_nand,
-	&msm_device_hsusb,
-	&msm_device_i2c,
-};
-
-static void __init trout_init_early(void)
-{
-	arch_ioremap_caller = __msm_ioremap_caller;
-}
-
-static void __init trout_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init trout_fixup(struct tag *tags, char **cmdline)
-{
-	memblock_add(PHYS_OFFSET, 101*SZ_1M);
-}
-
-static void __init trout_init(void)
-{
-	int rc;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	if (IS_ENABLED(CONFIG_MMC)) {
-		rc = trout_init_mmc(system_rev);
-		if (rc)
-			pr_crit("MMC init failure (%d)\n", rc);
-	}
-}
-
-static struct map_desc trout_io_desc[] __initdata = {
-	{
-		.virtual = (unsigned long)TROUT_CPLD_BASE,
-		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
-		.length  = TROUT_CPLD_SIZE,
-		.type    = MT_DEVICE_NONSHARED
-	}
-};
-
-static void __init trout_map_io(void)
-{
-	msm_map_common_io();
-	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
-
-#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9c00000)
-	/* route UART3 to the "H2W" extended usb connector */
-	writeb(0x80, TROUT_CPLD_BASE + 0x00);
-#endif
-}
-
-static void __init trout_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(TROUT, "HTC Dream")
-	.atag_offset	= 0x100,
-	.fixup		= trout_fixup,
-	.map_io		= trout_map_io,
-	.init_early	= trout_init_early,
-	.init_irq	= trout_init_irq,
-	.init_machine	= trout_init,
-	.init_late	= trout_init_late,
-	.init_time	= msm7x01_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
deleted file mode 100644
index adb757abbb92..000000000000
--- a/arch/arm/mach-msm/board-trout.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout.h
-** Author: Brian Swetland <swetland@google.com>
-*/
-#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
-#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
-
-#include "common.h"
-
-#define MSM_SMI_BASE		0x00000000
-#define MSM_SMI_SIZE		0x00800000
-
-#define MSM_EBI_BASE		0x10000000
-#define MSM_EBI_SIZE		0x06e00000
-
-#define MSM_PMEM_GPU0_BASE	0x00000000
-#define MSM_PMEM_GPU0_SIZE	0x00700000
-
-#define MSM_PMEM_MDP_BASE	0x02000000
-#define MSM_PMEM_MDP_SIZE	0x00800000
-
-#define MSM_PMEM_ADSP_BASE      0x02800000
-#define MSM_PMEM_ADSP_SIZE	0x00800000
-
-#define MSM_PMEM_CAMERA_BASE	0x03000000
-#define MSM_PMEM_CAMERA_SIZE	0x00800000
-
-#define MSM_FB_BASE		0x03800000
-#define MSM_FB_SIZE		0x00100000
-
-#define MSM_LINUX_BASE		MSM_EBI_BASE
-#define MSM_LINUX_SIZE		0x06500000
-
-#define MSM_PMEM_GPU1_SIZE	0x800000
-#define MSM_PMEM_GPU1_BASE	(MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE)
-
-#define MSM_RAM_CONSOLE_BASE	(MSM_EBI_BASE + 0x6d00000)
-#define MSM_RAM_CONSOLE_SIZE	(128 * SZ_1K)
-
-#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
-#error invalid memory map
-#endif
-
-#define DECLARE_MSM_IOMAP
-#include <mach/msm_iomap.h>
-
-#define TROUT_4_BALL_UP_0     1
-#define TROUT_4_BALL_LEFT_0   18
-#define TROUT_4_BALL_DOWN_0   57
-#define TROUT_4_BALL_RIGHT_0  91
-
-#define TROUT_5_BALL_UP_0     94
-#define TROUT_5_BALL_LEFT_0   18
-#define TROUT_5_BALL_DOWN_0   90
-#define TROUT_5_BALL_RIGHT_0  19
-
-#define TROUT_POWER_KEY     20
-
-#define TROUT_4_TP_LS_EN    19
-#define TROUT_5_TP_LS_EN    1
-
-#define TROUT_CPLD_BASE   IOMEM(0xE8100000)
-#define TROUT_CPLD_START  0x98000000
-#define TROUT_CPLD_SIZE   SZ_4K
-
-#define TROUT_GPIO_CABLE_IN1		(83)
-#define TROUT_GPIO_CABLE_IN2		(49)
-
-#define TROUT_GPIO_START (128)
-
-#define TROUT_GPIO_INT_MASK0_REG            (0x0c)
-#define TROUT_GPIO_INT_STAT0_REG            (0x0e)
-#define TROUT_GPIO_INT_MASK1_REG            (0x14)
-#define TROUT_GPIO_INT_STAT1_REG            (0x10)
-
-#define TROUT_GPIO_HAPTIC_PWM               (28)
-#define TROUT_GPIO_PS_HOLD                  (25)
-
-#define TROUT_GPIO_MISC2_BASE               (TROUT_GPIO_START + 0x00)
-#define TROUT_GPIO_MISC3_BASE               (TROUT_GPIO_START + 0x08)
-#define TROUT_GPIO_MISC4_BASE               (TROUT_GPIO_START + 0x10)
-#define TROUT_GPIO_MISC5_BASE               (TROUT_GPIO_START + 0x18)
-#define TROUT_GPIO_INT2_BASE                (TROUT_GPIO_START + 0x20)
-#define TROUT_GPIO_MISC1_BASE               (TROUT_GPIO_START + 0x28)
-#define TROUT_GPIO_VIRTUAL_BASE             (TROUT_GPIO_START + 0x30)
-#define TROUT_GPIO_INT5_BASE                (TROUT_GPIO_START + 0x48)
-
-#define TROUT_GPIO_CHARGER_EN               (TROUT_GPIO_MISC2_BASE + 0)
-#define TROUT_GPIO_ISET                     (TROUT_GPIO_MISC2_BASE + 1)
-#define TROUT_GPIO_H2W_DAT_DIR              (TROUT_GPIO_MISC2_BASE + 2)
-#define TROUT_GPIO_H2W_CLK_DIR              (TROUT_GPIO_MISC2_BASE + 3)
-#define TROUT_GPIO_H2W_DAT_GPO              (TROUT_GPIO_MISC2_BASE + 4)
-#define TROUT_GPIO_H2W_CLK_GPO              (TROUT_GPIO_MISC2_BASE + 5)
-#define TROUT_GPIO_H2W_SEL0                 (TROUT_GPIO_MISC2_BASE + 6)
-#define TROUT_GPIO_H2W_SEL1                 (TROUT_GPIO_MISC2_BASE + 7)
-
-#define TROUT_GPIO_SPOTLIGHT_EN             (TROUT_GPIO_MISC3_BASE + 0)
-#define TROUT_GPIO_FLASH_EN                 (TROUT_GPIO_MISC3_BASE + 1)
-#define TROUT_GPIO_I2C_PULL                 (TROUT_GPIO_MISC3_BASE + 2)
-#define TROUT_GPIO_TP_I2C_PULL              (TROUT_GPIO_MISC3_BASE + 3)
-#define TROUT_GPIO_TP_EN                    (TROUT_GPIO_MISC3_BASE + 4)
-#define TROUT_GPIO_JOG_EN                   (TROUT_GPIO_MISC3_BASE + 5)
-#define TROUT_GPIO_UI_LED_EN                (TROUT_GPIO_MISC3_BASE + 6)
-#define TROUT_GPIO_QTKEY_LED_EN             (TROUT_GPIO_MISC3_BASE + 7)
-
-#define TROUT_GPIO_VCM_PWDN                 (TROUT_GPIO_MISC4_BASE + 0)
-#define TROUT_GPIO_USB_H2W_SW               (TROUT_GPIO_MISC4_BASE + 1)
-#define TROUT_GPIO_COMPASS_RST_N            (TROUT_GPIO_MISC4_BASE + 2)
-#define TROUT_GPIO_HAPTIC_EN_UP             (TROUT_GPIO_MISC4_BASE + 3)
-#define TROUT_GPIO_HAPTIC_EN_MAIN           (TROUT_GPIO_MISC4_BASE + 4)
-#define TROUT_GPIO_USB_PHY_RST_N            (TROUT_GPIO_MISC4_BASE + 5)
-#define TROUT_GPIO_WIFI_PA_RESETX           (TROUT_GPIO_MISC4_BASE + 6)
-#define TROUT_GPIO_WIFI_EN                  (TROUT_GPIO_MISC4_BASE + 7)
-
-#define TROUT_GPIO_BT_32K_EN                (TROUT_GPIO_MISC5_BASE + 0)
-#define TROUT_GPIO_MAC_32K_EN               (TROUT_GPIO_MISC5_BASE + 1)
-#define TROUT_GPIO_MDDI_32K_EN              (TROUT_GPIO_MISC5_BASE + 2)
-#define TROUT_GPIO_COMPASS_32K_EN           (TROUT_GPIO_MISC5_BASE + 3)
-
-#define TROUT_GPIO_NAVI_ACT_N               (TROUT_GPIO_INT2_BASE + 0)
-#define TROUT_GPIO_COMPASS_IRQ              (TROUT_GPIO_INT2_BASE + 1)
-#define TROUT_GPIO_SLIDING_DET              (TROUT_GPIO_INT2_BASE + 2)
-#define TROUT_GPIO_AUD_HSMIC_DET_N          (TROUT_GPIO_INT2_BASE + 3)
-#define TROUT_GPIO_SD_DOOR_N                (TROUT_GPIO_INT2_BASE + 4)
-#define TROUT_GPIO_CAM_BTN_STEP1_N          (TROUT_GPIO_INT2_BASE + 5)
-#define TROUT_GPIO_CAM_BTN_STEP2_N          (TROUT_GPIO_INT2_BASE + 6)
-#define TROUT_GPIO_TP_ATT_N                 (TROUT_GPIO_INT2_BASE + 7)
-#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE   (TROUT_GPIO_NAVI_ACT_N)
-#define TROUT_GPIO_BANK0_LAST_INT_SOURCE    (TROUT_GPIO_TP_ATT_N)
-
-#define TROUT_GPIO_H2W_DAT_GPI              (TROUT_GPIO_MISC1_BASE + 0)
-#define TROUT_GPIO_H2W_CLK_GPI              (TROUT_GPIO_MISC1_BASE + 1)
-#define TROUT_GPIO_CPLD128_VER_0            (TROUT_GPIO_MISC1_BASE + 4)
-#define TROUT_GPIO_CPLD128_VER_1            (TROUT_GPIO_MISC1_BASE + 5)
-#define TROUT_GPIO_CPLD128_VER_2            (TROUT_GPIO_MISC1_BASE + 6)
-#define TROUT_GPIO_CPLD128_VER_3            (TROUT_GPIO_MISC1_BASE + 7)
-
-#define TROUT_GPIO_SDMC_CD_N                (TROUT_GPIO_VIRTUAL_BASE + 0)
-#define TROUT_GPIO_END                      (TROUT_GPIO_SDMC_CD_N)
-#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE   (TROUT_GPIO_SDMC_CD_N)
-#define TROUT_GPIO_BANK1_LAST_INT_SOURCE    (TROUT_GPIO_SDMC_CD_N)
-
-#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
-	(TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
-
-#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
-#define TROUT_INT_BANK0_COUNT (8)
-#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
-#define TROUT_INT_BANK1_COUNT (1)
-#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
-			TROUT_INT_BANK1_COUNT - 1)
-#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
-	(TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
-	(TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
-
-#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
-#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
-#define TROUT_BANK_TO_MASK_REG(bank) \
-	(bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
-#define TROUT_BANK_TO_STAT_REG(bank) \
-	(bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
-
-#endif /* GUARD */
diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c
deleted file mode 100644
index f5b69d736ee5..000000000000
--- a/arch/arm/mach-msm/clock-pcom.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-
-#include <mach/clk.h>
-
-#include "proc_comm.h"
-#include "clock.h"
-#include "clock-pcom.h"
-
-struct clk_pcom {
-	unsigned id;
-	unsigned long flags;
-	struct msm_clk msm_clk;
-};
-
-static inline struct clk_pcom *to_clk_pcom(struct clk_hw *hw)
-{
-	return container_of(to_msm_clk(hw), struct clk_pcom, msm_clk);
-}
-
-static int pc_clk_enable(struct clk_hw *hw)
-{
-	unsigned id = to_clk_pcom(hw)->id;
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-static void pc_clk_disable(struct clk_hw *hw)
-{
-	unsigned id = to_clk_pcom(hw)->id;
-	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
-}
-
-static int pc_clk_reset(struct clk_hw *hw, enum clk_reset_action action)
-{
-	int rc;
-	unsigned id = to_clk_pcom(hw)->id;
-
-	if (action == CLK_RESET_ASSERT)
-		rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL);
-	else
-		rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_DEASSERT, &id, NULL);
-
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-static int pc_clk_set_rate(struct clk_hw *hw, unsigned long new_rate,
-			   unsigned long p_rate)
-{
-	struct clk_pcom *p = to_clk_pcom(hw);
-	unsigned id = p->id, rate = new_rate;
-	int rc;
-
-	/*
-	 * The rate _might_ be rounded off to the nearest KHz value by the
-	 * remote function. So a return value of 0 doesn't necessarily mean
-	 * that the exact rate was set successfully.
-	 */
-	if (p->flags & CLKFLAG_MIN)
-		rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
-	else
-		rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-static unsigned long pc_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate)
-{
-	unsigned id = to_clk_pcom(hw)->id;
-	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
-		return 0;
-	else
-		return id;
-}
-
-static int pc_clk_is_enabled(struct clk_hw *hw)
-{
-	unsigned id = to_clk_pcom(hw)->id;
-	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
-		return 0;
-	else
-		return id;
-}
-
-static long pc_clk_round_rate(struct clk_hw *hw, unsigned long rate,
-			      unsigned long *p_rate)
-{
-	/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
-	return rate;
-}
-
-static struct clk_ops clk_ops_pcom = {
-	.enable = pc_clk_enable,
-	.disable = pc_clk_disable,
-	.set_rate = pc_clk_set_rate,
-	.recalc_rate = pc_clk_recalc_rate,
-	.is_enabled = pc_clk_is_enabled,
-	.round_rate = pc_clk_round_rate,
-};
-
-static int msm_clock_pcom_probe(struct platform_device *pdev)
-{
-	const struct pcom_clk_pdata *pdata = pdev->dev.platform_data;
-	int i, ret;
-
-	for (i = 0; i < pdata->num_lookups; i++) {
-		const struct clk_pcom_desc *desc = &pdata->lookup[i];
-		struct clk *c;
-		struct clk_pcom *p;
-		struct clk_hw *hw;
-		struct clk_init_data init;
-
-		p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-		if (!p)
-			return -ENOMEM;
-
-		p->id = desc->id;
-		p->flags = desc->flags;
-		p->msm_clk.reset = pc_clk_reset;
-
-		hw = &p->msm_clk.hw;
-		hw->init = &init;
-
-		init.name = desc->name;
-		init.ops = &clk_ops_pcom;
-		init.num_parents = 0;
-		init.flags = CLK_IS_ROOT;
-
-		if (!(p->flags & CLKFLAG_AUTO_OFF))
-			init.flags |= CLK_IGNORE_UNUSED;
-
-		c = devm_clk_register(&pdev->dev, hw);
-		ret = clk_register_clkdev(c, desc->con, desc->dev);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-static struct platform_driver msm_clock_pcom_driver = {
-	.probe		= msm_clock_pcom_probe,
-	.driver		= {
-		.name	= "msm-clock-pcom",
-	},
-};
-module_platform_driver(msm_clock_pcom_driver);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h
deleted file mode 100644
index 5bb164fd46a8..000000000000
--- a/arch/arm/mach-msm/clock-pcom.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
-#define __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
-
-/* clock IDs used by the modem processor */
-
-#define P_ACPU_CLK	0   /* Applications processor clock */
-#define P_ADM_CLK	1   /* Applications data mover clock */
-#define P_ADSP_CLK	2   /* ADSP clock */
-#define P_EBI1_CLK	3   /* External bus interface 1 clock */
-#define P_EBI2_CLK	4   /* External bus interface 2 clock */
-#define P_ECODEC_CLK	5   /* External CODEC clock */
-#define P_EMDH_CLK	6   /* External MDDI host clock */
-#define P_GP_CLK	7   /* General purpose clock */
-#define P_GRP_3D_CLK	8   /* Graphics clock */
-#define P_I2C_CLK	9   /* I2C clock */
-#define P_ICODEC_RX_CLK	10  /* Internal CODEX RX clock */
-#define P_ICODEC_TX_CLK	11  /* Internal CODEX TX clock */
-#define P_IMEM_CLK	12  /* Internal graphics memory clock */
-#define P_MDC_CLK	13  /* MDDI client clock */
-#define P_MDP_CLK	14  /* Mobile display processor clock */
-#define P_PBUS_CLK	15  /* Peripheral bus clock */
-#define P_PCM_CLK	16  /* PCM clock */
-#define P_PMDH_CLK	17  /* Primary MDDI host clock */
-#define P_SDAC_CLK	18  /* Stereo DAC clock */
-#define P_SDC1_CLK	19  /* Secure Digital Card clocks */
-#define P_SDC1_P_CLK	20
-#define P_SDC2_CLK	21
-#define P_SDC2_P_CLK	22
-#define P_SDC3_CLK	23
-#define P_SDC3_P_CLK	24
-#define P_SDC4_CLK	25
-#define P_SDC4_P_CLK	26
-#define P_TSIF_CLK	27  /* Transport Stream Interface clocks */
-#define P_TSIF_REF_CLK	28
-#define P_TV_DAC_CLK	29  /* TV clocks */
-#define P_TV_ENC_CLK	30
-#define P_UART1_CLK	31  /* UART clocks */
-#define P_UART2_CLK	32
-#define P_UART3_CLK	33
-#define P_UART1DM_CLK	34
-#define P_UART2DM_CLK	35
-#define P_USB_HS_CLK	36  /* High speed USB core clock */
-#define P_USB_HS_P_CLK	37  /* High speed USB pbus clock */
-#define P_USB_OTG_CLK	38  /* Full speed USB clock */
-#define P_VDC_CLK	39  /* Video controller clock */
-#define P_VFE_MDC_CLK	40  /* Camera / Video Front End clock */
-#define P_VFE_CLK	41  /* VFE MDDI client clock */
-#define P_MDP_LCDC_PCLK_CLK	42
-#define P_MDP_LCDC_PAD_PCLK_CLK 43
-#define P_MDP_VSYNC_CLK	44
-#define P_SPI_CLK	45
-#define P_VFE_AXI_CLK	46
-#define P_USB_HS2_CLK	47  /* High speed USB 2 core clock */
-#define P_USB_HS2_P_CLK	48  /* High speed USB 2 pbus clock */
-#define P_USB_HS3_CLK	49  /* High speed USB 3 core clock */
-#define P_USB_HS3_P_CLK	50  /* High speed USB 3 pbus clock */
-#define P_GRP_3D_P_CLK	51  /* Graphics pbus clock */
-#define P_USB_PHY_CLK	52  /* USB PHY clock */
-#define P_USB_HS_CORE_CLK	53  /* High speed USB 1 core clock */
-#define P_USB_HS2_CORE_CLK	54  /* High speed USB 2 core clock */
-#define P_USB_HS3_CORE_CLK	55  /* High speed USB 3 core clock */
-#define P_CAM_M_CLK		56
-#define P_CAMIF_PAD_P_CLK	57
-#define P_GRP_2D_CLK		58
-#define P_GRP_2D_P_CLK		59
-#define P_I2S_CLK		60
-#define P_JPEG_CLK		61
-#define P_JPEG_P_CLK		62
-#define P_LPA_CODEC_CLK		63
-#define P_LPA_CORE_CLK		64
-#define P_LPA_P_CLK		65
-#define P_MDC_IO_CLK		66
-#define P_MDC_P_CLK		67
-#define P_MFC_CLK		68
-#define P_MFC_DIV2_CLK		69
-#define P_MFC_P_CLK		70
-#define P_QUP_I2C_CLK		71
-#define P_ROTATOR_IMEM_CLK	72
-#define P_ROTATOR_P_CLK		73
-#define P_VFE_CAMIF_CLK		74
-#define P_VFE_P_CLK		75
-#define P_VPE_CLK		76
-#define P_I2C_2_CLK		77
-#define P_MI2S_CODEC_RX_S_CLK	78
-#define P_MI2S_CODEC_RX_M_CLK	79
-#define P_MI2S_CODEC_TX_S_CLK	80
-#define P_MI2S_CODEC_TX_M_CLK	81
-#define P_PMDH_P_CLK		82
-#define P_EMDH_P_CLK		83
-#define P_SPI_P_CLK		84
-#define P_TSIF_P_CLK		85
-#define P_MDP_P_CLK		86
-#define P_SDAC_M_CLK		87
-#define P_MI2S_S_CLK		88
-#define P_MI2S_M_CLK		89
-#define P_AXI_ROTATOR_CLK	90
-#define P_HDMI_CLK		91
-#define P_CSI0_CLK		92
-#define P_CSI0_VFE_CLK		93
-#define P_CSI0_P_CLK		94
-#define P_CSI1_CLK		95
-#define P_CSI1_VFE_CLK		96
-#define P_CSI1_P_CLK		97
-#define P_GSBI_CLK		98
-#define P_GSBI_P_CLK		99
-#define P_CE_CLK		100 /* Crypto engine */
-#define P_CODEC_SSBI_CLK	101
-
-#define P_NR_CLKS		102
-
-struct clk_pcom_desc {
-	unsigned id;
-	const char *name;
-	const char *con;
-	const char *dev;
-	unsigned long flags;
-};
-
-struct pcom_clk_pdata {
-	struct clk_pcom_desc *lookup;
-	u32 num_lookups;
-};
-
-#define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) {	\
-	.id = P_##clk_id,					\
-	.name = #clk_id,					\
-	.con = clk_name,					\
-	.dev = clk_dev,						\
-	.flags = clk_flags,					\
-	}
-
-#endif
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
deleted file mode 100644
index 35ea02b52483..000000000000
--- a/arch/arm/mach-msm/clock.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-msm/clock.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clk-provider.h>
-#include <linux/module.h>
-
-#include "clock.h"
-
-int clk_reset(struct clk *clk, enum clk_reset_action action)
-{
-	struct clk_hw *hw = __clk_get_hw(clk);
-	struct msm_clk *m = to_msm_clk(hw);
-	return m->reset(hw, action);
-}
-EXPORT_SYMBOL(clk_reset);
diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h
deleted file mode 100644
index 42d29dd7aafc..000000000000
--- a/arch/arm/mach-msm/clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/mach-msm/clock.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H
-#define __ARCH_ARM_MACH_MSM_CLOCK_H
-
-#include <linux/clk-provider.h>
-#include <mach/clk.h>
-
-#define CLK_FIRST_AVAILABLE_FLAG	0x00000100
-#define CLKFLAG_AUTO_OFF		0x00000200
-#define CLKFLAG_MIN			0x00000400
-#define CLKFLAG_MAX			0x00000800
-
-#define OFF CLKFLAG_AUTO_OFF
-#define CLK_MIN CLKFLAG_MIN
-#define CLK_MAX CLKFLAG_MAX
-#define CLK_MINMAX (CLK_MIN | CLK_MAX)
-
-struct msm_clk {
-	int (*reset)(struct clk_hw *hw, enum clk_reset_action action);
-	struct clk_hw hw;
-};
-
-static inline struct msm_clk *to_msm_clk(struct clk_hw *hw)
-{
-	return container_of(hw, struct msm_clk, hw);
-}
-
-#endif
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
deleted file mode 100644
index 572479a3c7be..000000000000
--- a/arch/arm/mach-msm/common.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_COMMON_H
-#define __MACH_COMMON_H
-
-extern void msm7x01_timer_init(void);
-extern void msm7x30_timer_init(void);
-extern void qsd8x50_timer_init(void);
-
-extern void msm_map_common_io(void);
-extern void msm_map_msm7x30_io(void);
-extern void msm_map_qsd8x50_io(void);
-
-extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
-					  unsigned int mtype, void *caller);
-
-struct msm_mmc_platform_data;
-
-extern void msm_add_devices(void);
-extern void msm_init_irq(void);
-extern void msm_init_gpio(void);
-extern int msm_add_sdcc(unsigned int controller,
-			struct msm_mmc_platform_data *plat,
-			unsigned int stat_irq, unsigned long stat_irq_flags);
-
-#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
-extern int smd_debugfs_init(void);
-#else
-static inline int smd_debugfs_init(void) { return 0; }
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
deleted file mode 100644
index d83404d4b328..000000000000
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/* linux/arch/arm/mach-msm/devices.c
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/clkdev.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include "devices.h"
-
-#include <asm/mach/flash.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "clock.h"
-#include "clock-pcom.h"
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-static struct resource msm_gpio_resources[] = {
-	{
-		.start	= 32 + 0,
-		.end	= 32 + 0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 32 + 1,
-		.end	= 32 + 1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 0xa9200800,
-		.end	= 0xa9200800 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "gpio1"
-	},
-	{
-		.start	= 0xa9300C00,
-		.end	= 0xa9300C00 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "gpio2"
-	},
-};
-
-struct platform_device msm_device_gpio_7201 = {
-	.name	= "gpio-msm-7201",
-	.num_resources	= ARRAY_SIZE(msm_gpio_resources),
-	.resource	= msm_gpio_resources,
-};
-
-static struct resource resources_uart1[] = {
-	{
-		.start	= INT_UART1,
-		.end	= INT_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART1_PHYS,
-		.end	= MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-static struct resource resources_uart2[] = {
-	{
-		.start	= INT_UART2,
-		.end	= INT_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART2_PHYS,
-		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-static struct resource resources_uart3[] = {
-	{
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART3_PHYS,
-		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-struct platform_device msm_device_uart1 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart1),
-	.resource	= resources_uart1,
-};
-
-struct platform_device msm_device_uart2 = {
-	.name	= "msm_serial",
-	.id	= 1,
-	.num_resources	= ARRAY_SIZE(resources_uart2),
-	.resource	= resources_uart2,
-};
-
-struct platform_device msm_device_uart3 = {
-	.name	= "msm_serial",
-	.id	= 2,
-	.num_resources	= ARRAY_SIZE(resources_uart3),
-	.resource	= resources_uart3,
-};
-
-static struct resource resources_i2c[] = {
-	{
-		.start	= MSM_I2C_PHYS,
-		.end	= MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_PWB_I2C,
-		.end	= INT_PWB_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_i2c = {
-	.name		= "msm_i2c",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(resources_i2c),
-	.resource	= resources_i2c,
-};
-
-static struct resource resources_hsusb[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb),
-	.resource	= resources_hsusb,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct flash_platform_data msm_nand_data = {
-	.parts		= NULL,
-	.nr_parts	= 0,
-};
-
-static struct resource resources_nand[] = {
-	[0] = {
-		.start	= 7,
-		.end	= 7,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_nand = {
-	.name		= "msm_nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_nand),
-	.resource	= resources_nand,
-	.dev		= {
-		.platform_data	= &msm_nand_data,
-	},
-};
-
-struct platform_device msm_device_smd = {
-	.name	= "msm_smd",
-	.id	= -1,
-};
-
-static struct resource resources_sdc1[] = {
-	{
-		.start	= MSM_SDC1_PHYS,
-		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC1_0,
-		.end	= INT_SDC1_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc2[] = {
-	{
-		.start	= MSM_SDC2_PHYS,
-		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC2_0,
-		.end	= INT_SDC2_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc3[] = {
-	{
-		.start	= MSM_SDC3_PHYS,
-		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC3_0,
-		.end	= INT_SDC3_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc4[] = {
-	{
-		.start	= MSM_SDC4_PHYS,
-		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC4_0,
-		.end	= INT_SDC4_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_sdc1 = {
-	.name		= "msm_sdcc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(resources_sdc1),
-	.resource	= resources_sdc1,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc2 = {
-	.name		= "msm_sdcc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(resources_sdc2),
-	.resource	= resources_sdc2,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc3 = {
-	.name		= "msm_sdcc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(resources_sdc3),
-	.resource	= resources_sdc3,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc4 = {
-	.name		= "msm_sdcc",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(resources_sdc4),
-	.resource	= resources_sdc4,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device *msm_sdcc_devices[] __initdata = {
-	&msm_device_sdc1,
-	&msm_device_sdc2,
-	&msm_device_sdc3,
-	&msm_device_sdc4,
-};
-
-int __init msm_add_sdcc(unsigned int controller,
-			struct msm_mmc_platform_data *plat,
-			unsigned int stat_irq, unsigned long stat_irq_flags)
-{
-	struct platform_device	*pdev;
-	struct resource *res;
-
-	if (controller < 1 || controller > 4)
-		return -EINVAL;
-
-	pdev = msm_sdcc_devices[controller-1];
-	pdev->dev.platform_data = plat;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
-	if (!res)
-		return -EINVAL;
-	else if (stat_irq) {
-		res->start = res->end = stat_irq;
-		res->flags &= ~IORESOURCE_DISABLED;
-		res->flags |= stat_irq_flags;
-	}
-
-	return platform_device_register(pdev);
-}
-
-static struct resource resources_mddi0[] = {
-	{
-		.start	= MSM_PMDH_PHYS,
-		.end	= MSM_PMDH_PHYS + MSM_PMDH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_MDDI_PRI,
-		.end	= INT_MDDI_PRI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource resources_mddi1[] = {
-	{
-		.start	= MSM_EMDH_PHYS,
-		.end	= MSM_EMDH_PHYS + MSM_EMDH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_MDDI_EXT,
-		.end	= INT_MDDI_EXT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_mddi0 = {
-	.name = "msm_mddi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(resources_mddi0),
-	.resource = resources_mddi0,
-	.dev = {
-		.coherent_dma_mask      = 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_mddi1 = {
-	.name = "msm_mddi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(resources_mddi1),
-	.resource = resources_mddi1,
-	.dev = {
-		.coherent_dma_mask      = 0xffffffff,
-	},
-};
-
-static struct resource resources_mdp[] = {
-	{
-		.start	= MSM_MDP_PHYS,
-		.end	= MSM_MDP_PHYS + MSM_MDP_SIZE - 1,
-		.name	= "mdp",
-		.flags	= IORESOURCE_MEM
-	},
-	{
-		.start	= INT_MDP,
-		.end	= INT_MDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_mdp = {
-	.name = "msm_mdp",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(resources_mdp),
-	.resource = resources_mdp,
-};
-
-static struct clk_pcom_desc msm_clocks_7x01a[] = {
-	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
-	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
-	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, 0),
-	CLK_PCOM("ebi2_clk",	EBI2_CLK,	NULL, 0),
-	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
-	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF),
-	CLK_PCOM("gp_clk",		GP_CLK,		NULL, 0),
-	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, OFF),
-	CLK_PCOM("i2c_clk",	I2C_CLK,	"msm_i2c.0", 0),
-	CLK_PCOM("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
-	CLK_PCOM("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
-	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
-	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
-	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
-	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, 0),
-	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
-	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
-	CLK_PCOM("sdc_clk",	SDC1_CLK,	"msm_sdcc.1", OFF),
-	CLK_PCOM("sdc_pclk",	SDC1_P_CLK,	"msm_sdcc.1", OFF),
-	CLK_PCOM("sdc_clk",	SDC2_CLK,	"msm_sdcc.2", OFF),
-	CLK_PCOM("sdc_pclk",	SDC2_P_CLK,	"msm_sdcc.2", OFF),
-	CLK_PCOM("sdc_clk",	SDC3_CLK,	"msm_sdcc.3", OFF),
-	CLK_PCOM("sdc_pclk",	SDC3_P_CLK,	"msm_sdcc.3", OFF),
-	CLK_PCOM("sdc_clk",	SDC4_CLK,	"msm_sdcc.4", OFF),
-	CLK_PCOM("sdc_pclk",	SDC4_P_CLK,	"msm_sdcc.4", OFF),
-	CLK_PCOM("tsif_clk",	TSIF_CLK,	NULL, 0),
-	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
-	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
-	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("core",	UART1_CLK,	"msm_serial.0", OFF),
-	CLK_PCOM("core",	UART2_CLK,	"msm_serial.1", 0),
-	CLK_PCOM("core",	UART3_CLK,	"msm_serial.2", OFF),
-	CLK_PCOM("uart1dm_clk",	UART1DM_CLK,	NULL, OFF),
-	CLK_PCOM("uart2dm_clk",	UART2DM_CLK,	NULL, 0),
-	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	"msm_hsusb", OFF),
-	CLK_PCOM("usb_hs_pclk",	USB_HS_P_CLK,	"msm_hsusb", OFF),
-	CLK_PCOM("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
-	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF ),
-	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, OFF),
-	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
-};
-
-static struct pcom_clk_pdata msm_clock_7x01a_pdata = {
-	.lookup = msm_clocks_7x01a,
-	.num_lookups = ARRAY_SIZE(msm_clocks_7x01a),
-};
-
-struct platform_device msm_clock_7x01a = {
-	.name = "msm-clock-pcom",
-	.dev.platform_data = &msm_clock_7x01a_pdata,
-};
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
deleted file mode 100644
index c15ea8ab20a7..000000000000
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Copyright (C) 2008 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/clkdev.h>
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-
-#include "devices.h"
-#include "smd_private.h"
-#include "common.h"
-
-#include <asm/mach/flash.h>
-
-#include "clock.h"
-#include "clock-pcom.h"
-
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-static struct resource msm_gpio_resources[] = {
-	{
-		.start	= 32 + 18,
-		.end	= 32 + 18,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 32 + 19,
-		.end	= 32 + 19,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 0xac001000,
-		.end	= 0xac001000 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "gpio1"
-	},
-	{
-		.start	= 0xac101400,
-		.end	= 0xac101400 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "gpio2"
-	},
-};
-
-struct platform_device msm_device_gpio_7x30 = {
-	.name	= "gpio-msm-7x30",
-	.num_resources	= ARRAY_SIZE(msm_gpio_resources),
-	.resource	= msm_gpio_resources,
-};
-
-static struct resource resources_uart2[] = {
-	{
-		.start	= INT_UART2,
-		.end	= INT_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART2_PHYS,
-		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-struct platform_device msm_device_uart2 = {
-	.name	= "msm_serial",
-	.id	= 1,
-	.num_resources	= ARRAY_SIZE(resources_uart2),
-	.resource	= resources_uart2,
-};
-
-struct platform_device msm_device_smd = {
-	.name   = "msm_smd",
-	.id     = -1,
-};
-
-static struct resource resources_otg[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_otg = {
-	.name		= "msm_otg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_otg),
-	.resource	= resources_otg,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct resource resources_hsusb[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb),
-	.resource	= resources_hsusb,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-static struct resource resources_hsusb_host[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb_host = {
-	.name		= "msm_hsusb_host",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb_host),
-	.resource	= resources_hsusb_host,
-	.dev		= {
-		.dma_mask               = &dma_mask,
-		.coherent_dma_mask      = 0xffffffffULL,
-	},
-};
-
-static struct clk_pcom_desc msm_clocks_7x30[] = {
-	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
-	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
-	CLK_PCOM("cam_m_clk",	CAM_M_CLK,	NULL, 0),
-	CLK_PCOM("camif_pad_pclk",	CAMIF_PAD_P_CLK,	NULL, OFF),
-	CLK_PCOM("ce_clk",	CE_CLK,	NULL, 0),
-	CLK_PCOM("codec_ssbi_clk",	CODEC_SSBI_CLK,	NULL, 0),
-	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
-	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
-	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("emdh_pclk",	EMDH_P_CLK,	NULL, OFF),
-	CLK_PCOM("gp_clk",	GP_CLK,		NULL, 0),
-	CLK_PCOM("grp_2d_clk",	GRP_2D_CLK,	NULL, 0),
-	CLK_PCOM("grp_2d_pclk",	GRP_2D_P_CLK,	NULL, 0),
-	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, 0),
-	CLK_PCOM("grp_pclk",	GRP_3D_P_CLK,	NULL, 0),
-	CLK_PCOM("hdmi_clk",	HDMI_CLK,	NULL, 0),
-	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
-	CLK_PCOM("jpeg_clk",	JPEG_CLK,	NULL, OFF),
-	CLK_PCOM("jpeg_pclk",	JPEG_P_CLK,	NULL, OFF),
-	CLK_PCOM("lpa_codec_clk",	LPA_CODEC_CLK,		NULL, 0),
-	CLK_PCOM("lpa_core_clk",	LPA_CORE_CLK,		NULL, 0),
-	CLK_PCOM("lpa_pclk",		LPA_P_CLK,		NULL, 0),
-	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
-	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("mddi_pclk",	PMDH_P_CLK,	NULL, 0),
-	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
-	CLK_PCOM("mdp_pclk",	MDP_P_CLK,	NULL, 0),
-	CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
-	CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
-	CLK_PCOM("mdp_vsync_clk",	MDP_VSYNC_CLK,  NULL, 0),
-	CLK_PCOM("mfc_clk",		MFC_CLK,		NULL, 0),
-	CLK_PCOM("mfc_div2_clk",	MFC_DIV2_CLK,		NULL, 0),
-	CLK_PCOM("mfc_pclk",		MFC_P_CLK,		NULL, 0),
-	CLK_PCOM("mi2s_m_clk",		MI2S_M_CLK,  		NULL, 0),
-	CLK_PCOM("mi2s_s_clk",		MI2S_S_CLK,  		NULL, 0),
-	CLK_PCOM("mi2s_codec_rx_m_clk",	MI2S_CODEC_RX_M_CLK,  NULL, 0),
-	CLK_PCOM("mi2s_codec_rx_s_clk",	MI2S_CODEC_RX_S_CLK,  NULL, 0),
-	CLK_PCOM("mi2s_codec_tx_m_clk",	MI2S_CODEC_TX_M_CLK,  NULL, 0),
-	CLK_PCOM("mi2s_codec_tx_s_clk",	MI2S_CODEC_TX_S_CLK,  NULL, 0),
-	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, CLK_MIN),
-	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
-	CLK_PCOM("rotator_clk",	AXI_ROTATOR_CLK,		NULL, 0),
-	CLK_PCOM("rotator_imem_clk",	ROTATOR_IMEM_CLK,	NULL, OFF),
-	CLK_PCOM("rotator_pclk",	ROTATOR_P_CLK,		NULL, OFF),
-	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
-	CLK_PCOM("spi_clk",	SPI_CLK,	NULL, 0),
-	CLK_PCOM("spi_pclk",	SPI_P_CLK,	NULL, 0),
-	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
-	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("core",	UART2_CLK,	"msm_serial.1", 0),
-	CLK_PCOM("usb_phy_clk",	USB_PHY_CLK,	NULL, 0),
-	CLK_PCOM("usb_hs_clk",		USB_HS_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs_pclk",		USB_HS_P_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs_core_clk",	USB_HS_CORE_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs2_clk",		USB_HS2_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs2_pclk",	USB_HS2_P_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs2_core_clk",	USB_HS2_CORE_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs3_clk",		USB_HS3_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs3_pclk",	USB_HS3_P_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs3_core_clk",	USB_HS3_CORE_CLK,	NULL, OFF),
-	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF | CLK_MIN),
-	CLK_PCOM("vfe_camif_clk",	VFE_CAMIF_CLK, 	NULL, 0),
-	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, 0),
-	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, 0),
-	CLK_PCOM("vfe_pclk",	VFE_P_CLK,	NULL, OFF),
-	CLK_PCOM("vpe_clk",	VPE_CLK,	NULL, 0),
-
-	/* 7x30 v2 hardware only. */
-	CLK_PCOM("csi_clk",	CSI0_CLK,	NULL, 0),
-	CLK_PCOM("csi_pclk",	CSI0_P_CLK,	NULL, 0),
-	CLK_PCOM("csi_vfe_clk",	CSI0_VFE_CLK,	NULL, 0),
-};
-
-static struct pcom_clk_pdata msm_clock_7x30_pdata = {
-	.lookup = msm_clocks_7x30,
-	.num_lookups = ARRAY_SIZE(msm_clocks_7x30),
-};
-
-struct platform_device msm_clock_7x30 = {
-	.name = "msm-clock-pcom",
-	.dev.platform_data = &msm_clock_7x30_pdata,
-};
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
deleted file mode 100644
index 9e1e9ce07b1a..000000000000
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * Copyright (C) 2008 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-
-#include "devices.h"
-#include "common.h"
-
-#include <asm/mach/flash.h>
-
-#include <linux/platform_data/mmc-msm_sdcc.h>
-#include "clock.h"
-#include "clock-pcom.h"
-
-static struct resource msm_gpio_resources[] = {
-	{
-		.start	= 64 + 165 + 9,
-		.end	= 64 + 165 + 9,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 64 + 165 + 10,
-		.end	= 64 + 165 + 10,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 0xa9000800,
-		.end	= 0xa9000800 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "gpio1"
-	},
-	{
-		.start	= 0xa9100C00,
-		.end	= 0xa9100C00 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "gpio2"
-	},
-};
-
-struct platform_device msm_device_gpio_8x50 = {
-	.name	= "gpio-msm-8x50",
-	.num_resources	= ARRAY_SIZE(msm_gpio_resources),
-	.resource	= msm_gpio_resources,
-};
-
-static struct resource resources_uart3[] = {
-	{
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART3_PHYS,
-		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-struct platform_device msm_device_uart3 = {
-	.name	= "msm_serial",
-	.id	= 2,
-	.num_resources	= ARRAY_SIZE(resources_uart3),
-	.resource	= resources_uart3,
-};
-
-struct platform_device msm_device_smd = {
-	.name   = "msm_smd",
-	.id     = -1,
-};
-
-static struct resource resources_otg[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_otg = {
-	.name		= "msm_otg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_otg),
-	.resource	= resources_otg,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct resource resources_hsusb[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb),
-	.resource	= resources_hsusb,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-static struct resource resources_hsusb_host[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb_host = {
-	.name		= "msm_hsusb_host",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb_host),
-	.resource	= resources_hsusb_host,
-	.dev		= {
-		.dma_mask               = &dma_mask,
-		.coherent_dma_mask      = 0xffffffffULL,
-	},
-};
-
-static struct resource resources_sdc1[] = {
-	{
-		.start	= MSM_SDC1_PHYS,
-		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC1_0,
-		.end	= INT_SDC1_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc2[] = {
-	{
-		.start	= MSM_SDC2_PHYS,
-		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC2_0,
-		.end	= INT_SDC2_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc3[] = {
-	{
-		.start	= MSM_SDC3_PHYS,
-		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC3_0,
-		.end	= INT_SDC3_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc4[] = {
-	{
-		.start	= MSM_SDC4_PHYS,
-		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC4_0,
-		.end	= INT_SDC4_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_sdc1 = {
-	.name		= "msm_sdcc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(resources_sdc1),
-	.resource	= resources_sdc1,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc2 = {
-	.name		= "msm_sdcc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(resources_sdc2),
-	.resource	= resources_sdc2,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc3 = {
-	.name		= "msm_sdcc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(resources_sdc3),
-	.resource	= resources_sdc3,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc4 = {
-	.name		= "msm_sdcc",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(resources_sdc4),
-	.resource	= resources_sdc4,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device *msm_sdcc_devices[] __initdata = {
-	&msm_device_sdc1,
-	&msm_device_sdc2,
-	&msm_device_sdc3,
-	&msm_device_sdc4,
-};
-
-int __init msm_add_sdcc(unsigned int controller,
-			struct msm_mmc_platform_data *plat,
-			unsigned int stat_irq, unsigned long stat_irq_flags)
-{
-	struct platform_device	*pdev;
-	struct resource *res;
-
-	if (controller < 1 || controller > 4)
-		return -EINVAL;
-
-	pdev = msm_sdcc_devices[controller-1];
-	pdev->dev.platform_data = plat;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
-	if (!res)
-		return -EINVAL;
-	else if (stat_irq) {
-		res->start = res->end = stat_irq;
-		res->flags &= ~IORESOURCE_DISABLED;
-		res->flags |= stat_irq_flags;
-	}
-
-	return platform_device_register(pdev);
-}
-
-static struct clk_pcom_desc msm_clocks_8x50[] = {
-	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
-	CLK_PCOM("ce_clk",	CE_CLK,		NULL, 0),
-	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
-	CLK_PCOM("ebi2_clk",	EBI2_CLK,	NULL, 0),
-	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
-	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("gp_clk",	GP_CLK,		NULL, 0),
-	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, 0),
-	CLK_PCOM("i2c_clk",	I2C_CLK,	NULL, 0),
-	CLK_PCOM("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
-	CLK_PCOM("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
-	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
-	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
-	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
-	CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
-	CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
-	CLK_PCOM("mdp_vsync_clk",	MDP_VSYNC_CLK,	NULL, 0),
-	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, CLK_MIN),
-	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
-	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
-	CLK_PCOM("sdc_clk",	SDC1_CLK,	"msm_sdcc.1", OFF),
-	CLK_PCOM("sdc_pclk",	SDC1_P_CLK,	"msm_sdcc.1", OFF),
-	CLK_PCOM("sdc_clk",	SDC2_CLK,	"msm_sdcc.2", OFF),
-	CLK_PCOM("sdc_pclk",	SDC2_P_CLK,	"msm_sdcc.2", OFF),
-	CLK_PCOM("sdc_clk",	SDC3_CLK,	"msm_sdcc.3", OFF),
-	CLK_PCOM("sdc_pclk",	SDC3_P_CLK,	"msm_sdcc.3", OFF),
-	CLK_PCOM("sdc_clk",	SDC4_CLK,	"msm_sdcc.4", OFF),
-	CLK_PCOM("sdc_pclk",	SDC4_P_CLK,	"msm_sdcc.4", OFF),
-	CLK_PCOM("spi_clk",	SPI_CLK,	NULL, 0),
-	CLK_PCOM("tsif_clk",	TSIF_CLK,	NULL, 0),
-	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
-	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
-	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("core",	UART1_CLK,	NULL, OFF),
-	CLK_PCOM("core",	UART2_CLK,	NULL, 0),
-	CLK_PCOM("core",	UART3_CLK,	"msm_serial.2", OFF),
-	CLK_PCOM("uartdm_clk",	UART1DM_CLK,	NULL, OFF),
-	CLK_PCOM("uartdm_clk",	UART2DM_CLK,	NULL, 0),
-	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs_pclk",	USB_HS_P_CLK,	NULL, OFF),
-	CLK_PCOM("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
-	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF | CLK_MIN),
-	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, OFF),
-	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
-	CLK_PCOM("vfe_axi_clk",	VFE_AXI_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs2_clk",	USB_HS2_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs2_pclk",	USB_HS2_P_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs3_clk",	USB_HS3_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs3_pclk",	USB_HS3_P_CLK,	NULL, OFF),
-	CLK_PCOM("usb_phy_clk",	USB_PHY_CLK,	NULL, 0),
-};
-
-static struct pcom_clk_pdata msm_clock_8x50_pdata = {
-	.lookup = msm_clocks_8x50,
-	.num_lookups = ARRAY_SIZE(msm_clocks_8x50),
-};
-
-struct platform_device msm_clock_8x50 = {
-	.name = "msm-clock-pcom",
-	.dev.platform_data = &msm_clock_8x50_pdata,
-};
diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h
deleted file mode 100644
index dccefad9f9b9..000000000000
--- a/arch/arm/mach-msm/devices.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/arch/arm/mach-msm/devices.h
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
-#define __ARCH_ARM_MACH_MSM_DEVICES_H
-
-extern struct platform_device msm_device_gpio_7201;
-extern struct platform_device msm_device_gpio_7x30;
-extern struct platform_device msm_device_gpio_8x50;
-
-extern struct platform_device msm_device_uart1;
-extern struct platform_device msm_device_uart2;
-extern struct platform_device msm_device_uart3;
-
-extern struct platform_device msm8960_device_uart_gsbi2;
-extern struct platform_device msm8960_device_uart_gsbi5;
-
-extern struct platform_device msm_device_sdc1;
-extern struct platform_device msm_device_sdc2;
-extern struct platform_device msm_device_sdc3;
-extern struct platform_device msm_device_sdc4;
-
-extern struct platform_device msm_device_hsusb;
-extern struct platform_device msm_device_otg;
-extern struct platform_device msm_device_hsusb_host;
-
-extern struct platform_device msm_device_i2c;
-
-extern struct platform_device msm_device_smd;
-
-extern struct platform_device msm_device_nand;
-
-extern struct platform_device msm_device_mddi0;
-extern struct platform_device msm_device_mddi1;
-extern struct platform_device msm_device_mdp;
-
-extern struct platform_device msm_clock_7x01a;
-extern struct platform_device msm_clock_7x30;
-extern struct platform_device msm_clock_8x50;
-
-#endif
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
deleted file mode 100644
index fb9762464718..000000000000
--- a/arch/arm/mach-msm/dma.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/* linux/arch/arm/mach-msm/dma.c
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/completion.h>
-#include <linux/module.h>
-#include <mach/dma.h>
-#include <mach/msm_iomap.h>
-
-#define MSM_DMOV_CHANNEL_COUNT 16
-
-#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
-#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
-#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
-#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define DMOV_SD_AARM DMOV_SD2
-#else
-#define DMOV_SD_AARM DMOV_SD3
-#endif
-
-#define DMOV_CMD_PTR(ch)      DMOV_SD_AARM(0x000, ch)
-#define DMOV_RSLT(ch)         DMOV_SD_AARM(0x040, ch)
-#define DMOV_FLUSH0(ch)       DMOV_SD_AARM(0x080, ch)
-#define DMOV_FLUSH1(ch)       DMOV_SD_AARM(0x0C0, ch)
-#define DMOV_FLUSH2(ch)       DMOV_SD_AARM(0x100, ch)
-#define DMOV_FLUSH3(ch)       DMOV_SD_AARM(0x140, ch)
-#define DMOV_FLUSH4(ch)       DMOV_SD_AARM(0x180, ch)
-#define DMOV_FLUSH5(ch)       DMOV_SD_AARM(0x1C0, ch)
-
-#define DMOV_STATUS(ch)       DMOV_SD_AARM(0x200, ch)
-#define DMOV_ISR              DMOV_SD_AARM(0x380, 0)
-
-#define DMOV_CONFIG(ch)       DMOV_SD_AARM(0x300, ch)
-
-enum {
-	MSM_DMOV_PRINT_ERRORS = 1,
-	MSM_DMOV_PRINT_IO = 2,
-	MSM_DMOV_PRINT_FLOW = 4
-};
-
-static DEFINE_SPINLOCK(msm_dmov_lock);
-static struct clk *msm_dmov_clk;
-static unsigned int channel_active;
-static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
-static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
-unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
-
-#define MSM_DMOV_DPRINTF(mask, format, args...) \
-	do { \
-		if ((mask) & msm_dmov_print_mask) \
-			printk(KERN_ERR format, args); \
-	} while (0)
-#define PRINT_ERROR(format, args...) \
-	MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args);
-#define PRINT_IO(format, args...) \
-	MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args);
-#define PRINT_FLOW(format, args...) \
-	MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
-
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
-{
-	writel((graceful << 31), DMOV_FLUSH0(id));
-}
-EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd);
-
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
-{
-	unsigned long irq_flags;
-	unsigned int status;
-
-	spin_lock_irqsave(&msm_dmov_lock, irq_flags);
-	if (!channel_active)
-		clk_enable(msm_dmov_clk);
-	dsb();
-	status = readl(DMOV_STATUS(id));
-	if (list_empty(&ready_commands[id]) &&
-		(status & DMOV_STATUS_CMD_PTR_RDY)) {
-#if 0
-		if (list_empty(&active_commands[id])) {
-			PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id);
-			writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id));
-		}
-#endif
-		if (cmd->execute_func)
-			cmd->execute_func(cmd);
-		PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
-		list_add_tail(&cmd->list, &active_commands[id]);
-		if (!channel_active)
-			enable_irq(INT_ADM_AARM);
-		channel_active |= 1U << id;
-		writel(cmd->cmdptr, DMOV_CMD_PTR(id));
-	} else {
-		if (!channel_active)
-			clk_disable(msm_dmov_clk);
-		if (list_empty(&active_commands[id]))
-			PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status);
-
-		PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status);
-		list_add_tail(&cmd->list, &ready_commands[id]);
-	}
-	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
-}
-EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd);
-
-struct msm_dmov_exec_cmdptr_cmd {
-	struct msm_dmov_cmd dmov_cmd;
-	struct completion complete;
-	unsigned id;
-	unsigned int result;
-	struct msm_dmov_errdata err;
-};
-
-static void
-dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd,
-			       unsigned int result,
-			       struct msm_dmov_errdata *err)
-{
-	struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
-	cmd->result = result;
-	if (result != 0x80000002 && err)
-		memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata));
-
-	complete(&cmd->complete);
-}
-
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
-{
-	struct msm_dmov_exec_cmdptr_cmd cmd;
-
-	PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr);
-
-	cmd.dmov_cmd.cmdptr = cmdptr;
-	cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func;
-	cmd.dmov_cmd.execute_func = NULL;
-	cmd.id = id;
-	init_completion(&cmd.complete);
-
-	msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd);
-	wait_for_completion(&cmd.complete);
-
-	if (cmd.result != 0x80000002) {
-		PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
-		PRINT_ERROR("dmov_exec_cmdptr(%d):  flush: %x %x %x %x\n",
-			id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]);
-		return -EIO;
-	}
-	PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
-	return 0;
-}
-
-
-static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
-{
-	unsigned int int_status, mask, id;
-	unsigned long irq_flags;
-	unsigned int ch_status;
-	unsigned int ch_result;
-	struct msm_dmov_cmd *cmd;
-
-	spin_lock_irqsave(&msm_dmov_lock, irq_flags);
-
-	int_status = readl(DMOV_ISR); /* read and clear interrupt */
-	PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status);
-
-	while (int_status) {
-		mask = int_status & -int_status;
-		id = fls(mask) - 1;
-		PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id);
-		int_status &= ~mask;
-		ch_status = readl(DMOV_STATUS(id));
-		if (!(ch_status & DMOV_STATUS_RSLT_VALID)) {
-			PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status);
-			continue;
-		}
-		do {
-			ch_result = readl(DMOV_RSLT(id));
-			if (list_empty(&active_commands[id])) {
-				PRINT_ERROR("msm_datamover_irq_handler id %d, got result "
-					"with no active command, status %x, result %x\n",
-					id, ch_status, ch_result);
-				cmd = NULL;
-			} else
-				cmd = list_entry(active_commands[id].next, typeof(*cmd), list);
-			PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result);
-			if (ch_result & DMOV_RSLT_DONE) {
-				PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n",
-					id, ch_status);
-				PRINT_IO("msm_datamover_irq_handler id %d, got result "
-					"for %p, result %x\n", id, cmd, ch_result);
-				if (cmd) {
-					list_del(&cmd->list);
-					dsb();
-					cmd->complete_func(cmd, ch_result, NULL);
-				}
-			}
-			if (ch_result & DMOV_RSLT_FLUSH) {
-				struct msm_dmov_errdata errdata;
-
-				errdata.flush[0] = readl(DMOV_FLUSH0(id));
-				errdata.flush[1] = readl(DMOV_FLUSH1(id));
-				errdata.flush[2] = readl(DMOV_FLUSH2(id));
-				errdata.flush[3] = readl(DMOV_FLUSH3(id));
-				errdata.flush[4] = readl(DMOV_FLUSH4(id));
-				errdata.flush[5] = readl(DMOV_FLUSH5(id));
-				PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-				PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
-				if (cmd) {
-					list_del(&cmd->list);
-					dsb();
-					cmd->complete_func(cmd, ch_result, &errdata);
-				}
-			}
-			if (ch_result & DMOV_RSLT_ERROR) {
-				struct msm_dmov_errdata errdata;
-
-				errdata.flush[0] = readl(DMOV_FLUSH0(id));
-				errdata.flush[1] = readl(DMOV_FLUSH1(id));
-				errdata.flush[2] = readl(DMOV_FLUSH2(id));
-				errdata.flush[3] = readl(DMOV_FLUSH3(id));
-				errdata.flush[4] = readl(DMOV_FLUSH4(id));
-				errdata.flush[5] = readl(DMOV_FLUSH5(id));
-
-				PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-				PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
-				if (cmd) {
-					list_del(&cmd->list);
-					dsb();
-					cmd->complete_func(cmd, ch_result, &errdata);
-				}
-				/* this does not seem to work, once we get an error */
-				/* the datamover will no longer accept commands */
-				writel(0, DMOV_FLUSH0(id));
-			}
-			ch_status = readl(DMOV_STATUS(id));
-			PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-			if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
-				cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
-				list_move_tail(&cmd->list, &active_commands[id]);
-				if (cmd->execute_func)
-					cmd->execute_func(cmd);
-				PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
-				writel(cmd->cmdptr, DMOV_CMD_PTR(id));
-			}
-		} while (ch_status & DMOV_STATUS_RSLT_VALID);
-		if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id]))
-			channel_active &= ~(1U << id);
-		PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-	}
-
-	if (!channel_active) {
-		disable_irq_nosync(INT_ADM_AARM);
-		clk_disable(msm_dmov_clk);
-	}
-
-	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
-	return IRQ_HANDLED;
-}
-
-static int __init msm_init_datamover(void)
-{
-	int i;
-	int ret;
-	struct clk *clk;
-
-	for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
-		INIT_LIST_HEAD(&ready_commands[i]);
-		INIT_LIST_HEAD(&active_commands[i]);
-		writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
-	}
-	clk = clk_get(NULL, "adm_clk");
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-	clk_prepare(clk);
-	msm_dmov_clk = clk;
-	ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
-	if (ret)
-		return ret;
-	disable_irq(INT_ADM_AARM);
-	return 0;
-}
-module_init(msm_init_datamover);
diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c
deleted file mode 100644
index f7a4ea593c95..000000000000
--- a/arch/arm/mach-msm/gpiomux-8x50.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include "gpiomux.h"
-
-#if defined(CONFIG_MMC_MSM) || defined(CONFIG_MMC_MSM_MODULE)
-	#define SDCC_DAT_0_3_CMD_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_UP\
-					| GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
-	#define SDCC_CLK_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_NONE\
-					| GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
-#else
-	#define SDCC_DAT_0_3_CMD_ACTV_CFG 0
-	#define SDCC_CLK_ACTV_CFG 0
-#endif
-
-#define SDC1_SUSPEND_CONFIG (GPIOMUX_VALID | GPIOMUX_PULL_DOWN\
-				| GPIOMUX_FUNC_GPIO | GPIOMUX_DRV_2MA)
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
-	[86] = { /* UART3 RX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_1 | GPIOMUX_VALID,
-	},
-	[87] = { /* UART3 TX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_1 | GPIOMUX_VALID,
-	},
-	/* SDC1 data[3:0] & CMD */
-	[51 ... 55] = {
-		.active = SDCC_DAT_0_3_CMD_ACTV_CFG,
-		.suspended = SDC1_SUSPEND_CONFIG
-	},
-	/* SDC1 CLK */
-	[56] = {
-		.active = SDCC_CLK_ACTV_CFG,
-		.suspended = SDC1_SUSPEND_CONFIG
-	},
-};
diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h
deleted file mode 100644
index 71d86feba450..000000000000
--- a/arch/arm/mach-msm/gpiomux-v1.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
-#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define GPIOMUX_NGPIOS 182
-#elif defined(CONFIG_ARCH_QSD8X50)
-#define GPIOMUX_NGPIOS 165
-#else
-#define GPIOMUX_NGPIOS 133
-#endif
-
-typedef u32 gpiomux_config_t;
-
-enum {
-	GPIOMUX_DRV_2MA  = 0UL << 17,
-	GPIOMUX_DRV_4MA  = 1UL << 17,
-	GPIOMUX_DRV_6MA  = 2UL << 17,
-	GPIOMUX_DRV_8MA  = 3UL << 17,
-	GPIOMUX_DRV_10MA = 4UL << 17,
-	GPIOMUX_DRV_12MA = 5UL << 17,
-	GPIOMUX_DRV_14MA = 6UL << 17,
-	GPIOMUX_DRV_16MA = 7UL << 17,
-};
-
-enum {
-	GPIOMUX_FUNC_GPIO = 0UL,
-	GPIOMUX_FUNC_1    = 1UL,
-	GPIOMUX_FUNC_2    = 2UL,
-	GPIOMUX_FUNC_3    = 3UL,
-	GPIOMUX_FUNC_4    = 4UL,
-	GPIOMUX_FUNC_5    = 5UL,
-	GPIOMUX_FUNC_6    = 6UL,
-	GPIOMUX_FUNC_7    = 7UL,
-	GPIOMUX_FUNC_8    = 8UL,
-	GPIOMUX_FUNC_9    = 9UL,
-	GPIOMUX_FUNC_A    = 10UL,
-	GPIOMUX_FUNC_B    = 11UL,
-	GPIOMUX_FUNC_C    = 12UL,
-	GPIOMUX_FUNC_D    = 13UL,
-	GPIOMUX_FUNC_E    = 14UL,
-	GPIOMUX_FUNC_F    = 15UL,
-};
-
-enum {
-	GPIOMUX_PULL_NONE   = 0UL << 15,
-	GPIOMUX_PULL_DOWN   = 1UL << 15,
-	GPIOMUX_PULL_KEEPER = 2UL << 15,
-	GPIOMUX_PULL_UP     = 3UL << 15,
-};
-
-#endif
diff --git a/arch/arm/mach-msm/gpiomux.c b/arch/arm/mach-msm/gpiomux.c
deleted file mode 100644
index 2b8e2d217082..000000000000
--- a/arch/arm/mach-msm/gpiomux.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include "gpiomux.h"
-#include "proc_comm.h"
-
-static DEFINE_SPINLOCK(gpiomux_lock);
-
-static void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
-{
-	unsigned tlmm_config  = (val & ~GPIOMUX_CTL_MASK) |
-				((gpio & 0x3ff) << 4);
-	unsigned tlmm_disable = 0;
-	int rc;
-
-	rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
-			   &tlmm_config, &tlmm_disable);
-	if (rc)
-		pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
-		       __func__, rc, tlmm_config, tlmm_disable);
-}
-
-int msm_gpiomux_write(unsigned gpio,
-		      gpiomux_config_t active,
-		      gpiomux_config_t suspended)
-{
-	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
-	unsigned long irq_flags;
-	gpiomux_config_t setting;
-
-	if (gpio >= GPIOMUX_NGPIOS)
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpiomux_lock, irq_flags);
-
-	if (active & GPIOMUX_VALID)
-		cfg->active = active;
-
-	if (suspended & GPIOMUX_VALID)
-		cfg->suspended = suspended;
-
-	setting = cfg->ref ? active : suspended;
-	if (setting & GPIOMUX_VALID)
-		__msm_gpiomux_write(gpio, setting);
-
-	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
-	return 0;
-}
-EXPORT_SYMBOL(msm_gpiomux_write);
-
-int msm_gpiomux_get(unsigned gpio)
-{
-	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
-	unsigned long irq_flags;
-
-	if (gpio >= GPIOMUX_NGPIOS)
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpiomux_lock, irq_flags);
-	if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID)
-		__msm_gpiomux_write(gpio, cfg->active);
-	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
-	return 0;
-}
-EXPORT_SYMBOL(msm_gpiomux_get);
-
-int msm_gpiomux_put(unsigned gpio)
-{
-	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
-	unsigned long irq_flags;
-
-	if (gpio >= GPIOMUX_NGPIOS)
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpiomux_lock, irq_flags);
-	BUG_ON(cfg->ref == 0);
-	if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID)
-		__msm_gpiomux_write(gpio, cfg->suspended);
-	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
-	return 0;
-}
-EXPORT_SYMBOL(msm_gpiomux_put);
-
-static int __init gpiomux_init(void)
-{
-	unsigned n;
-
-	for (n = 0; n < GPIOMUX_NGPIOS; ++n) {
-		msm_gpiomux_configs[n].ref = 0;
-		if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID))
-			continue;
-		__msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended);
-	}
-	return 0;
-}
-postcore_initcall(gpiomux_init);
diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h
deleted file mode 100644
index 4410d7766f93..000000000000
--- a/arch/arm/mach-msm/gpiomux.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H
-#define __ARCH_ARM_MACH_MSM_GPIOMUX_H
-
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <mach/msm_gpiomux.h>
-#include "gpiomux-v1.h"
-
-/**
- * struct msm_gpiomux_config: gpiomux settings for one gpio line.
- *
- * A complete gpiomux config is the bitwise-or of a drive-strength,
- * function, and pull.  For functions other than GPIO, the OE
- * is hard-wired according to the function.  For GPIO mode,
- * OE is controlled by gpiolib.
- *
- * Available settings differ by target; see the gpiomux header
- * specific to your target arch for available configurations.
- *
- * @active: The configuration to be installed when the line is
- * active, or its reference count is > 0.
- * @suspended: The configuration to be installed when the line
- * is suspended, or its reference count is 0.
- * @ref: The reference count of the line.  For internal use of
- * the gpiomux framework only.
- */
-struct msm_gpiomux_config {
-	gpiomux_config_t active;
-	gpiomux_config_t suspended;
-	unsigned         ref;
-};
-
-/**
- * @GPIOMUX_VALID:	If set, the config field contains 'good data'.
- *                      The absence of this bit will prevent the gpiomux
- *			system from applying the configuration under all
- *			circumstances.
- */
-enum {
-	GPIOMUX_VALID	 = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1),
-	GPIOMUX_CTL_MASK = GPIOMUX_VALID,
-};
-
-#ifdef CONFIG_MSM_GPIOMUX
-
-/* Each architecture must provide its own instance of this table.
- * To avoid having gpiomux manage any given gpio, one or both of
- * the entries can avoid setting GPIOMUX_VALID - the absence
- * of that flag will prevent the configuration from being applied
- * during state transitions.
- */
-extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
-
-/* Install a new configuration to the gpio line.  To avoid overwriting
- * a configuration, leave the VALID bit out.
- */
-int msm_gpiomux_write(unsigned gpio,
-		      gpiomux_config_t active,
-		      gpiomux_config_t suspended);
-#else
-static inline int msm_gpiomux_write(unsigned gpio,
-				    gpiomux_config_t active,
-				    gpiomux_config_t suspended)
-{
-	return -ENOSYS;
-}
-#endif
-#endif
diff --git a/arch/arm/mach-msm/include/mach/clk.h b/arch/arm/mach-msm/include/mach/clk.h
deleted file mode 100644
index fd4f4a7a83b3..000000000000
--- a/arch/arm/mach-msm/include/mach/clk.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_CLK_H
-#define __MACH_CLK_H
-
-/* Magic rate value for use with PM QOS to request the board's maximum
- * supported AXI rate. PM QOS will only pass positive s32 rate values
- * through to the clock driver, so INT_MAX is used.
- */
-#define MSM_AXI_MAX_FREQ	LONG_MAX
-
-enum clk_reset_action {
-	CLK_RESET_DEASSERT	= 0,
-	CLK_RESET_ASSERT	= 1
-};
-
-struct clk;
-
-/* Assert/Deassert reset to a hardware block associated with a clock */
-int clk_reset(struct clk *clk, enum clk_reset_action action);
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
deleted file mode 100644
index a72d48d42342..000000000000
--- a/arch/arm/mach-msm/include/mach/dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/include/asm-arm/arch-msm/dma.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_DMA_H
-
-#include <linux/list.h>
-
-struct msm_dmov_errdata {
-	uint32_t flush[6];
-};
-
-struct msm_dmov_cmd {
-	struct list_head list;
-	unsigned int cmdptr;
-	void (*complete_func)(struct msm_dmov_cmd *cmd,
-			      unsigned int result,
-			      struct msm_dmov_errdata *err);
-	void (*execute_func)(struct msm_dmov_cmd *cmd);
-	void *data;
-};
-
-#ifndef CONFIG_ARCH_MSM8X60
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-#else
-static inline
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { }
-static inline
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { }
-static inline
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; }
-#endif
-
-#define DMOV_CMD_LIST         (0 << 29) /* does not work */
-#define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
-#define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
-#define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
-#define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
-
-#define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
-#define DMOV_RSLT_ERROR       (1 << 3)
-#define DMOV_RSLT_FLUSH       (1 << 2)
-#define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
-#define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
-
-#define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
-#define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
-#define DMOV_STATUS_RSLT_VALID       (1 << 1)
-#define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
-
-#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
-#define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
-#define DMOV_CONFIG_IRQ_EN             (1 << 0)
-
-/* channel assignments */
-
-#define DMOV_NAND_CHAN        7
-#define DMOV_NAND_CRCI_CMD    5
-#define DMOV_NAND_CRCI_DATA   4
-
-#define DMOV_SDC1_CHAN        8
-#define DMOV_SDC1_CRCI        6
-
-#define DMOV_SDC2_CHAN        8
-#define DMOV_SDC2_CRCI        7
-
-#define DMOV_TSIF_CHAN        10
-#define DMOV_TSIF_CRCI        10
-
-#define DMOV_USB_CHAN         11
-
-/* no client rate control ifc (eg, ram) */
-#define DMOV_NONE_CRCI        0
-
-
-/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
- * is going to walk a list of 32bit pointers as described below.  Each
- * pointer points to a *array* of dmov_s, etc structs.  The last pointer
- * in the list is marked with CMD_PTR_LP.  The last struct in each array
- * is marked with CMD_LC (see below).
- */
-#define CMD_PTR_ADDR(addr)  ((addr) >> 3)
-#define CMD_PTR_LP          (1 << 31) /* last pointer */
-#define CMD_PTR_PT          (3 << 29) /* ? */
-
-/* Single Item Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src;
-	unsigned dst;
-	unsigned len;
-} dmov_s;
-
-/* Scatter/Gather Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src_dscr;
-	unsigned dst_dscr;
-	unsigned _reserved;
-} dmov_sg;
-
-/* Box mode */
-typedef struct {
-	uint32_t cmd;
-	uint32_t src_row_addr;
-	uint32_t dst_row_addr;
-	uint32_t src_dst_len;
-	uint32_t num_rows;
-	uint32_t row_offset;
-} dmov_box;
-
-/* bits for the cmd field of the above structures */
-
-#define CMD_LC      (1 << 31)  /* last command */
-#define CMD_FR      (1 << 22)  /* force result -- does not work? */
-#define CMD_OCU     (1 << 21)  /* other channel unblock */
-#define CMD_OCB     (1 << 20)  /* other channel block */
-#define CMD_TCB     (1 << 19)  /* ? */
-#define CMD_DAH     (1 << 18)  /* destination address hold -- does not work?*/
-#define CMD_SAH     (1 << 17)  /* source address hold -- does not work? */
-
-#define CMD_MODE_SINGLE     (0 << 0) /* dmov_s structure used */
-#define CMD_MODE_SG         (1 << 0) /* untested */
-#define CMD_MODE_IND_SG     (2 << 0) /* untested */
-#define CMD_MODE_BOX        (3 << 0) /* untested */
-
-#define CMD_DST_SWAP_BYTES  (1 << 14) /* exchange each byte n with byte n+1 */
-#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
-#define CMD_DST_SWAP_WORDS  (1 << 16) /* exchange each word n with word n+1 */
-
-#define CMD_SRC_SWAP_BYTES  (1 << 11) /* exchange each byte n with byte n+1 */
-#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
-#define CMD_SRC_SWAP_WORDS  (1 << 13) /* exchange each word n with word n+1 */
-
-#define CMD_DST_CRCI(n)     (((n) & 15) << 7)
-#define CMD_SRC_CRCI(n)     (((n) & 15) << 3)
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
deleted file mode 100644
index f2ae9087f654..000000000000
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-
-#if !defined(CONFIG_ARM_GIC)
-#include <mach/msm_iomap.h>
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	mov	\base, #MSM_VIC_BASE
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ 0xD0 has irq# or old irq# if the irq has been handled
-	@ 0xD4 has irq# or -1 if none pending *but* if you just
-	@ read 0xD4 you never get the first irq for some reason
-	ldr	\irqnr, [\base, #0xD0]
-	ldr	\irqnr, [\base, #0xD4]
-	cmp	\irqnr, #0xffffffff
-	.endm
-#endif
diff --git a/arch/arm/mach-msm/include/mach/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h
deleted file mode 100644
index 2d126091ae41..000000000000
--- a/arch/arm/mach-msm/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-msm/include/mach/hardware.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HARDWARE_H
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-7x00.h b/arch/arm/mach-msm/include/mach/irqs-7x00.h
deleted file mode 100644
index f1fe70612fe9..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs-7x00.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_7X00_H
-#define __ASM_ARCH_MSM_IRQS_7X00_H
-
-/* MSM ARM11 Interrupt Numbers */
-/* See 80-VE113-1 A, pp219-221     */
-
-#define INT_A9_M2A_0         0
-#define INT_A9_M2A_1         1
-#define INT_A9_M2A_2         2
-#define INT_A9_M2A_3         3
-#define INT_A9_M2A_4         4
-#define INT_A9_M2A_5         5
-#define INT_A9_M2A_6         6
-#define INT_GP_TIMER_EXP     7
-#define INT_DEBUG_TIMER_EXP  8
-#define INT_UART1            9
-#define INT_UART2            10
-#define INT_UART3            11
-#define INT_UART1_RX         12
-#define INT_UART2_RX         13
-#define INT_UART3_RX         14
-#define INT_USB_OTG          15
-#define INT_MDDI_PRI         16
-#define INT_MDDI_EXT         17
-#define INT_MDDI_CLIENT      18
-#define INT_MDP              19
-#define INT_GRAPHICS         20
-#define INT_ADM_AARM         21
-#define INT_ADSP_A11         22
-#define INT_ADSP_A9_A11      23
-#define INT_SDC1_0           24
-#define INT_SDC1_1           25
-#define INT_SDC2_0           26
-#define INT_SDC2_1           27
-#define INT_KEYSENSE         28
-#define INT_TCHSCRN_SSBI     29
-#define INT_TCHSCRN1         30
-#define INT_TCHSCRN2         31
-
-#define INT_GPIO_GROUP1      (32 + 0)
-#define INT_GPIO_GROUP2      (32 + 1)
-#define INT_PWB_I2C          (32 + 2)
-#define INT_SOFTRESET        (32 + 3)
-#define INT_NAND_WR_ER_DONE  (32 + 4)
-#define INT_NAND_OP_DONE     (32 + 5)
-#define INT_PBUS_ARM11       (32 + 6)
-#define INT_AXI_MPU_SMI      (32 + 7)
-#define INT_AXI_MPU_EBI1     (32 + 8)
-#define INT_AD_HSSD          (32 + 9)
-#define INT_ARM11_PMU        (32 + 10)
-#define INT_ARM11_DMA        (32 + 11)
-#define INT_TSIF_IRQ         (32 + 12)
-#define INT_UART1DM_IRQ      (32 + 13)
-#define INT_UART1DM_RX       (32 + 14)
-#define INT_USB_HS           (32 + 15)
-#define INT_SDC3_0           (32 + 16)
-#define INT_SDC3_1           (32 + 17)
-#define INT_SDC4_0           (32 + 18)
-#define INT_SDC4_1           (32 + 19)
-#define INT_UART2DM_RX       (32 + 20)
-#define INT_UART2DM_IRQ      (32 + 21)
-
-/* 22-31 are reserved */
-
-#define NR_MSM_IRQS 64
-#define NR_GPIO_IRQS 122
-#define NR_BOARD_IRQS 64
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-7x30.h b/arch/arm/mach-msm/include/mach/irqs-7x30.h
deleted file mode 100644
index 1f15902655fd..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs-7x30.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_7X30_H
-#define __ASM_ARCH_MSM_IRQS_7X30_H
-
-/* MSM ACPU Interrupt Numbers */
-
-#define INT_DEBUG_TIMER_EXP	0
-#define INT_GPT0_TIMER_EXP	1
-#define INT_GPT1_TIMER_EXP	2
-#define INT_WDT0_ACCSCSSBARK	3
-#define INT_WDT1_ACCSCSSBARK	4
-#define INT_AVS_SVIC		5
-#define INT_AVS_SVIC_SW_DONE	6
-#define INT_SC_DBG_RX_FULL	7
-#define INT_SC_DBG_TX_EMPTY	8
-#define INT_ARM11_PM		9
-#define INT_AVS_REQ_DOWN	10
-#define INT_AVS_REQ_UP		11
-#define INT_SC_ACG		12
-/* SCSS_VICFIQSTS0[13:15] are RESERVED */
-#define INT_L2_SVICCPUIRPTREQ	16
-#define INT_L2_SVICDMANSIRPTREQ 17
-#define INT_L2_SVICDMASIRPTREQ  18
-#define INT_L2_SVICSLVIRPTREQ	19
-#define INT_AD5A_MPROC_APPS_0	20
-#define INT_AD5A_MPROC_APPS_1	21
-#define INT_A9_M2A_0		22
-#define INT_A9_M2A_1		23
-#define INT_A9_M2A_2		24
-#define INT_A9_M2A_3		25
-#define INT_A9_M2A_4		26
-#define INT_A9_M2A_5		27
-#define INT_A9_M2A_6		28
-#define INT_A9_M2A_7		29
-#define INT_A9_M2A_8		30
-#define INT_A9_M2A_9		31
-
-#define INT_AXI_EBI1_SC		(32 + 0)
-#define INT_IMEM_ERR		(32 + 1)
-#define INT_AXI_EBI0_SC		(32 + 2)
-#define INT_PBUS_SC_IRQC	(32 + 3)
-#define INT_PERPH_BUS_BPM	(32 + 4)
-#define INT_CC_TEMP_SENSE	(32 + 5)
-#define INT_UXMC_EBI0		(32 + 6)
-#define INT_UXMC_EBI1		(32 + 7)
-#define INT_EBI2_OP_DONE	(32 + 8)
-#define INT_EBI2_WR_ER_DONE	(32 + 9)
-#define INT_TCSR_SPSS_CE	(32 + 10)
-#define INT_EMDH		(32 + 11)
-#define INT_PMDH		(32 + 12)
-#define INT_MDC			(32 + 13)
-#define INT_MIDI_TO_SUPSS	(32 + 14)
-#define INT_LPA_2		(32 + 15)
-#define INT_GPIO_GROUP1_SECURE	(32 + 16)
-#define INT_GPIO_GROUP2_SECURE	(32 + 17)
-#define INT_GPIO_GROUP1		(32 + 18)
-#define INT_GPIO_GROUP2		(32 + 19)
-#define INT_MPRPH_SOFTRESET	(32 + 20)
-#define INT_PWB_I2C		(32 + 21)
-#define INT_PWB_I2C_2		(32 + 22)
-#define INT_TSSC_SAMPLE		(32 + 23)
-#define INT_TSSC_PENUP		(32 + 24)
-#define INT_TCHSCRN_SSBI	(32 + 25)
-#define INT_FM_RDS		(32 + 26)
-#define INT_KEYSENSE 		(32 + 27)
-#define INT_USB_OTG_HS		(32 + 28)
-#define INT_USB_OTG_HS2		(32 + 29)
-#define INT_USB_OTG_HS3		(32 + 30)
-#define INT_CSI			(32 + 31)
-
-#define INT_SPI_OUTPUT		(64 + 0)
-#define INT_SPI_INPUT		(64 + 1)
-#define INT_SPI_ERROR		(64 + 2)
-#define INT_UART1		(64 + 3)
-#define INT_UART1_RX		(64 + 4)
-#define INT_UART2		(64 + 5)
-#define INT_UART2_RX		(64 + 6)
-#define INT_UART3		(64 + 7)
-#define INT_UART3_RX		(64 + 8)
-#define INT_UART1DM_IRQ		(64 + 9)
-#define INT_UART1DM_RX		(64 + 10)
-#define INT_UART2DM_IRQ		(64 + 11)
-#define INT_UART2DM_RX		(64 + 12)
-#define INT_TSIF		(64 + 13)
-#define INT_ADM_SC1		(64 + 14)
-#define INT_ADM_SC2		(64 + 15)
-#define INT_MDP			(64 + 16)
-#define INT_VPE			(64 + 17)
-#define INT_GRP_2D		(64 + 18)
-#define INT_GRP_3D		(64 + 19)
-#define INT_ROTATOR		(64 + 20)
-#define INT_MFC720		(64 + 21)
-#define INT_JPEG		(64 + 22)
-#define INT_VFE			(64 + 23)
-#define INT_TV_ENC		(64 + 24)
-#define INT_PMIC_SSBI		(64 + 25)
-#define INT_MPM_1		(64 + 26)
-#define INT_TCSR_SPSS_SAMPLE	(64 + 27)
-#define INT_TCSR_SPSS_PENUP	(64 + 28)
-#define INT_MPM_2		(64 + 29)
-#define INT_SDC1_0		(64 + 30)
-#define INT_SDC1_1		(64 + 31)
-
-#define INT_SDC3_0		(96 + 0)
-#define INT_SDC3_1		(96 + 1)
-#define INT_SDC2_0		(96 + 2)
-#define INT_SDC2_1		(96 + 3)
-#define INT_SDC4_0		(96 + 4)
-#define INT_SDC4_1		(96 + 5)
-#define INT_PWB_QUP_IN		(96 + 6)
-#define INT_PWB_QUP_OUT		(96 + 7)
-#define INT_PWB_QUP_ERR		(96 + 8)
-#define INT_SCSS_WDT0_BITE	(96 + 9)
-/* SCSS_VICFIQSTS3[10:31] are RESERVED */
-
-/* Retrofit universal macro names */
-#define INT_ADM_AARM		INT_ADM_SC2
-#define INT_USB_HS   		INT_USB_OTG_HS
-#define INT_USB_OTG   		INT_USB_OTG_HS
-#define INT_TCHSCRN1 		INT_TSSC_SAMPLE
-#define INT_TCHSCRN2 		INT_TSSC_PENUP
-#define INT_GP_TIMER_EXP 	INT_GPT0_TIMER_EXP
-#define INT_ADSP_A11 		INT_AD5A_MPROC_APPS_0
-#define INT_ADSP_A9_A11 	INT_AD5A_MPROC_APPS_1
-#define INT_MDDI_EXT		INT_EMDH
-#define INT_MDDI_PRI		INT_PMDH
-#define INT_MDDI_CLIENT		INT_MDC
-#define INT_NAND_WR_ER_DONE	INT_EBI2_WR_ER_DONE
-#define INT_NAND_OP_DONE	INT_EBI2_OP_DONE
-
-#define NR_MSM_IRQS		128
-#define NR_GPIO_IRQS		182
-#define PMIC8058_IRQ_BASE	(NR_MSM_IRQS + NR_GPIO_IRQS)
-#define NR_PMIC8058_GPIO_IRQS	40
-#define NR_PMIC8058_MPP_IRQS	12
-#define NR_PMIC8058_MISC_IRQS	8
-#define NR_PMIC8058_IRQS	(NR_PMIC8058_GPIO_IRQS +\
-				NR_PMIC8058_MPP_IRQS +\
-				NR_PMIC8058_MISC_IRQS)
-#define NR_BOARD_IRQS		NR_PMIC8058_IRQS
-
-#endif /* __ASM_ARCH_MSM_IRQS_7X30_H */
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x50.h b/arch/arm/mach-msm/include/mach/irqs-8x50.h
deleted file mode 100644
index 26adbe0e9406..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs-8x50.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8XXX_H
-#define __ASM_ARCH_MSM_IRQS_8XXX_H
-
-/* MSM ACPU Interrupt Numbers */
-
-#define INT_A9_M2A_0         0
-#define INT_A9_M2A_1         1
-#define INT_A9_M2A_2         2
-#define INT_A9_M2A_3         3
-#define INT_A9_M2A_4         4
-#define INT_A9_M2A_5         5
-#define INT_A9_M2A_6         6
-#define INT_GP_TIMER_EXP     7
-#define INT_DEBUG_TIMER_EXP  8
-#define INT_SIRC_0           9
-#define INT_SDC3_0           10
-#define INT_SDC3_1           11
-#define INT_SDC4_0           12
-#define INT_SDC4_1           13
-#define INT_AD6_EXT_VFR      14
-#define INT_USB_OTG          15
-#define INT_MDDI_PRI         16
-#define INT_MDDI_EXT         17
-#define INT_MDDI_CLIENT      18
-#define INT_MDP              19
-#define INT_GRAPHICS         20
-#define INT_ADM_AARM         21
-#define INT_ADSP_A11         22
-#define INT_ADSP_A9_A11      23
-#define INT_SDC1_0           24
-#define INT_SDC1_1           25
-#define INT_SDC2_0           26
-#define INT_SDC2_1           27
-#define INT_KEYSENSE         28
-#define INT_TCHSCRN_SSBI     29
-#define INT_TCHSCRN1         30
-#define INT_TCHSCRN2         31
-
-#define INT_TCSR_MPRPH_SC1   (32 + 0)
-#define INT_USB_FS2          (32 + 1)
-#define INT_PWB_I2C          (32 + 2)
-#define INT_SOFTRESET        (32 + 3)
-#define INT_NAND_WR_ER_DONE  (32 + 4)
-#define INT_NAND_OP_DONE     (32 + 5)
-#define INT_TCSR_MPRPH_SC2   (32 + 6)
-#define INT_OP_PEN           (32 + 7)
-#define INT_AD_HSSD          (32 + 8)
-#define INT_ARM11_PM         (32 + 9)
-#define INT_SDMA_NON_SECURE  (32 + 10)
-#define INT_TSIF_IRQ         (32 + 11)
-#define INT_UART1DM_IRQ      (32 + 12)
-#define INT_UART1DM_RX       (32 + 13)
-#define INT_SDMA_SECURE      (32 + 14)
-#define INT_SI2S_SLAVE       (32 + 15)
-#define INT_SC_I2CPU         (32 + 16)
-#define INT_SC_DBG_RDTRFULL  (32 + 17)
-#define INT_SC_DBG_WDTRFULL  (32 + 18)
-#define INT_SCPLL_CTL_DONE   (32 + 19)
-#define INT_UART2DM_IRQ      (32 + 20)
-#define INT_UART2DM_RX       (32 + 21)
-#define INT_VDC_MEC          (32 + 22)
-#define INT_VDC_DB           (32 + 23)
-#define INT_VDC_AXI          (32 + 24)
-#define INT_VFE              (32 + 25)
-#define INT_USB_HS           (32 + 26)
-#define INT_AUDIO_OUT0       (32 + 27)
-#define INT_AUDIO_OUT1       (32 + 28)
-#define INT_CRYPTO           (32 + 29)
-#define INT_AD6M_IDLE        (32 + 30)
-#define INT_SIRC_1           (32 + 31)
-
-#define NR_GPIO_IRQS 165
-#define NR_MSM_IRQS 64
-#define NR_BOARD_IRQS 64
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
deleted file mode 100644
index 164d355c96ea..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_H
-#define __ASM_ARCH_MSM_IRQS_H
-
-#define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#include "irqs-7x30.h"
-#elif defined(CONFIG_ARCH_QSD8X50)
-#include "irqs-8x50.h"
-#include "sirc.h"
-#elif defined(CONFIG_ARCH_MSM_ARM11)
-#include "irqs-7x00.h"
-#else
-#error "Unknown architecture specification"
-#endif
-
-#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
-#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
-#define MSM_INT_TO_REG(base, irq) (base + irq / 32)
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_gpiomux.h b/arch/arm/mach-msm/include/mach/msm_gpiomux.h
deleted file mode 100644
index 0c7d3936e02f..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_gpiomux.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _LINUX_MSM_GPIOMUX_H
-#define _LINUX_MSM_GPIOMUX_H
-
-#ifdef CONFIG_MSM_GPIOMUX
-
-/* Increment a gpio's reference count, possibly activating the line. */
-int __must_check msm_gpiomux_get(unsigned gpio);
-
-/* Decrement a gpio's reference count, possibly suspending the line. */
-int msm_gpiomux_put(unsigned gpio);
-
-#else
-
-static inline int __must_check msm_gpiomux_get(unsigned gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int msm_gpiomux_put(unsigned gpio)
-{
-	return -ENOSYS;
-}
-
-#endif
-
-#endif /* _LINUX_MSM_GPIOMUX_H */
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
deleted file mode 100644
index 67dc0e98b958..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* arch/arm/mach-msm/include/mach/msm_iomap.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_7X00_H
-#define __ASM_ARCH_MSM_IOMAP_7X00_H
-
-#include <asm/sizes.h>
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE          IOMEM(0xE0000000)
-#define MSM_VIC_PHYS          0xC0000000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define MSM7X00_CSR_PHYS      0xC0100000
-#define MSM7X00_CSR_SIZE      SZ_4K
-
-#define MSM_DMOV_BASE         IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS         0xA9700000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define MSM7X00_GPIO1_PHYS        0xA9200000
-#define MSM7X00_GPIO1_SIZE        SZ_4K
-
-#define MSM7X00_GPIO2_PHYS        0xA9300000
-#define MSM7X00_GPIO2_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS      0xA8600000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS   0x01F00000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_PHYS        0xA9C00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#define MSM_SDC1_PHYS         0xA0400000
-#define MSM_SDC1_SIZE         SZ_4K
-
-#define MSM_SDC2_PHYS         0xA0500000
-#define MSM_SDC2_SIZE         SZ_4K
-
-#define MSM_SDC3_PHYS         0xA0600000
-#define MSM_SDC3_SIZE         SZ_4K
-
-#define MSM_SDC4_PHYS         0xA0700000
-#define MSM_SDC4_SIZE         SZ_4K
-
-#define MSM_I2C_PHYS          0xA9900000
-#define MSM_I2C_SIZE          SZ_4K
-
-#define MSM_HSUSB_PHYS        0xA0800000
-#define MSM_HSUSB_SIZE        SZ_4K
-
-#define MSM_PMDH_PHYS         0xAA600000
-#define MSM_PMDH_SIZE         SZ_4K
-
-#define MSM_EMDH_PHYS         0xAA700000
-#define MSM_EMDH_SIZE         SZ_4K
-
-#define MSM_MDP_PHYS          0xAA200000
-#define MSM_MDP_SIZE          0x000F0000
-
-#define MSM_MDC_PHYS	      0xAA500000
-#define MSM_MDC_SIZE	      SZ_1M
-
-#define MSM_AD5_PHYS          0xAC000000
-#define MSM_AD5_SIZE          (SZ_1M*13)
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
deleted file mode 100644
index 198202c267c8..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_7X30_H
-#define __ASM_ARCH_MSM_IOMAP_7X30_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE          IOMEM(0xE0000000)
-#define MSM_VIC_PHYS          0xC0080000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define MSM7X30_CSR_PHYS      0xC0100000
-#define MSM7X30_CSR_SIZE      SZ_4K
-
-#define MSM_DMOV_BASE         IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS         0xAC400000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define MSM7X30_GPIO1_PHYS        0xAC001000
-#define MSM7X30_GPIO1_SIZE        SZ_4K
-
-#define MSM7X30_GPIO2_PHYS        0xAC101000
-#define MSM7X30_GPIO2_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS      0xAB800000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_CLK_CTL_SH2_BASE  IOMEM(0xE0006000)
-#define MSM_CLK_CTL_SH2_PHYS  0xABA01000
-#define MSM_CLK_CTL_SH2_SIZE  SZ_4K
-
-#define MSM_ACC_BASE          IOMEM(0xE0007000)
-#define MSM_ACC_PHYS          0xC0101000
-#define MSM_ACC_SIZE          SZ_4K
-
-#define MSM_SAW_BASE          IOMEM(0xE0008000)
-#define MSM_SAW_PHYS          0xC0102000
-#define MSM_SAW_SIZE          SZ_4K
-
-#define MSM_GCC_BASE	      IOMEM(0xE0009000)
-#define MSM_GCC_PHYS	      0xC0182000
-#define MSM_GCC_SIZE	      SZ_4K
-
-#define MSM_TCSR_BASE	      IOMEM(0xE000A000)
-#define MSM_TCSR_PHYS	      0xAB600000
-#define MSM_TCSR_SIZE	      SZ_4K
-
-#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS   0x00100000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#define MSM_UART1_PHYS        0xACA00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_PHYS        0xACB00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_PHYS        0xACC00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#define MSM_MDC_BASE	      IOMEM(0xE0200000)
-#define MSM_MDC_PHYS	      0xAA500000
-#define MSM_MDC_SIZE	      SZ_1M
-
-#define MSM_AD5_BASE          IOMEM(0xE0300000)
-#define MSM_AD5_PHYS          0xA7000000
-#define MSM_AD5_SIZE          (SZ_1M*13)
-
-#define MSM_HSUSB_PHYS        0xA3600000
-#define MSM_HSUSB_SIZE        SZ_1K
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
deleted file mode 100644
index 0faa894729b7..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_8X50_H
-#define __ASM_ARCH_MSM_IOMAP_8X50_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE          IOMEM(0xE0000000)
-#define MSM_VIC_PHYS          0xAC000000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define QSD8X50_CSR_PHYS      0xAC100000
-#define QSD8X50_CSR_SIZE      SZ_4K
-
-#define MSM_DMOV_BASE         IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS         0xA9700000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define QSD8X50_GPIO1_PHYS        0xA9000000
-#define QSD8X50_GPIO1_SIZE        SZ_4K
-
-#define QSD8X50_GPIO2_PHYS        0xA9100000
-#define QSD8X50_GPIO2_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS      0xA8600000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_SIRC_BASE         IOMEM(0xE1006000)
-#define MSM_SIRC_PHYS         0xAC200000
-#define MSM_SIRC_SIZE         SZ_4K
-
-#define MSM_SCPLL_BASE        IOMEM(0xE1007000)
-#define MSM_SCPLL_PHYS        0xA8800000
-#define MSM_SCPLL_SIZE        SZ_4K
-
-#ifdef CONFIG_MSM_SOC_REV_A
-#define MSM_SMI_BASE 0xE0000000
-#else
-#define MSM_SMI_BASE 0x00000000
-#endif
-
-#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000)
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_PHYS        0xA9C00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#define MSM_MDC_BASE	      IOMEM(0xE0200000)
-#define MSM_MDC_PHYS	      0xAA500000
-#define MSM_MDC_SIZE	      SZ_1M
-
-#define MSM_AD5_BASE          IOMEM(0xE0300000)
-#define MSM_AD5_PHYS          0xAC000000
-#define MSM_AD5_SIZE          (SZ_1M*13)
-
-
-#define MSM_I2C_SIZE          SZ_4K
-#define MSM_I2C_PHYS          0xA9900000
-
-#define MSM_HSUSB_PHYS        0xA0800000
-#define MSM_HSUSB_SIZE        SZ_1K
-
-#define MSM_NAND_PHYS           0xA0A00000
-
-
-#define MSM_TSIF_PHYS        (0xa0100000)
-#define MSM_TSIF_SIZE        (0x200)
-
-#define MSM_TSSC_PHYS         0xAA300000
-
-#define MSM_UART1DM_PHYS      0xA0200000
-#define MSM_UART2DM_PHYS      0xA0900000
-
-
-#define MSM_SDC1_PHYS          0xA0300000
-#define MSM_SDC1_SIZE          SZ_4K
-
-#define MSM_SDC2_PHYS          0xA0400000
-#define MSM_SDC2_SIZE          SZ_4K
-
-#define MSM_SDC3_PHYS          0xA0500000
-#define MSM_SDC3_SIZE           SZ_4K
-
-#define MSM_SDC4_PHYS          0xA0600000
-#define MSM_SDC4_SIZE          SZ_4K
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
deleted file mode 100644
index 0e4f49157684..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_H
-#define __ASM_ARCH_MSM_IOMAP_H
-
-#include <asm/sizes.h>
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#include "msm_iomap-7x30.h"
-#elif defined(CONFIG_ARCH_QSD8X50)
-#include "msm_iomap-8x50.h"
-#else
-#include "msm_iomap-7x00.h"
-#endif
-
-/* Virtual addresses shared across all MSM targets. */
-#define MSM_CSR_BASE		IOMEM(0xE0001000)
-#define MSM_GPIO1_BASE		IOMEM(0xE0003000)
-#define MSM_GPIO2_BASE		IOMEM(0xE0004000)
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_smd.h b/arch/arm/mach-msm/include/mach/msm_smd.h
deleted file mode 100644
index 029463ec8756..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_smd.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* linux/include/asm-arm/arch-msm/msm_smd.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_SMD_H
-#define __ASM_ARCH_MSM_SMD_H
-
-typedef struct smd_channel smd_channel_t;
-
-extern int (*msm_check_for_modem_crash)(void);
-
-/* warning: notify() may be called before open returns */
-int smd_open(const char *name, smd_channel_t **ch, void *priv,
-	     void (*notify)(void *priv, unsigned event));
-
-#define SMD_EVENT_DATA 1
-#define SMD_EVENT_OPEN 2
-#define SMD_EVENT_CLOSE 3
-
-int smd_close(smd_channel_t *ch);
-
-/* passing a null pointer for data reads and discards */
-int smd_read(smd_channel_t *ch, void *data, int len);
-
-/* Write to stream channels may do a partial write and return
-** the length actually written.
-** Write to packet channels will never do a partial write --
-** it will return the requested length written or an error.
-*/
-int smd_write(smd_channel_t *ch, const void *data, int len);
-int smd_write_atomic(smd_channel_t *ch, const void *data, int len);
-
-int smd_write_avail(smd_channel_t *ch);
-int smd_read_avail(smd_channel_t *ch);
-
-/* Returns the total size of the current packet being read.
-** Returns 0 if no packets available or a stream channel.
-*/
-int smd_cur_packet_size(smd_channel_t *ch);
-
-/* used for tty unthrottling and the like -- causes the notify()
-** callback to be called from the same lock context as is used
-** when it is called from channel updates
-*/
-void smd_kick(smd_channel_t *ch);
-
-
-#if 0
-/* these are interruptable waits which will block you until the specified
-** number of bytes are readable or writable.
-*/
-int smd_wait_until_readable(smd_channel_t *ch, int bytes);
-int smd_wait_until_writable(smd_channel_t *ch, int bytes);
-#endif
-
-typedef enum {
-	SMD_PORT_DS = 0,
-	SMD_PORT_DIAG,
-	SMD_PORT_RPC_CALL,
-	SMD_PORT_RPC_REPLY,
-	SMD_PORT_BT,
-	SMD_PORT_CONTROL,
-	SMD_PORT_MEMCPY_SPARE1,
-	SMD_PORT_DATA1,
-	SMD_PORT_DATA2,
-	SMD_PORT_DATA3,
-	SMD_PORT_DATA4,
-	SMD_PORT_DATA5,
-	SMD_PORT_DATA6,
-	SMD_PORT_DATA7,
-	SMD_PORT_DATA8,
-	SMD_PORT_DATA9,
-	SMD_PORT_DATA10,
-	SMD_PORT_DATA11,
-	SMD_PORT_DATA12,
-	SMD_PORT_DATA13,
-	SMD_PORT_DATA14,
-	SMD_PORT_DATA15,
-	SMD_PORT_DATA16,
-	SMD_PORT_DATA17,
-	SMD_PORT_DATA18,
-	SMD_PORT_DATA19,
-	SMD_PORT_DATA20,
-	SMD_PORT_GPS_NMEA,
-	SMD_PORT_BRIDGE_1,
-	SMD_PORT_BRIDGE_2,
-	SMD_PORT_BRIDGE_3,
-	SMD_PORT_BRIDGE_4,
-	SMD_PORT_BRIDGE_5,
-	SMD_PORT_LOOPBACK,
-	SMD_PORT_CS_APPS_MODEM,
-	SMD_PORT_CS_APPS_DSP,
-	SMD_PORT_CS_MODEM_DSP,
-	SMD_NUM_PORTS,
-} smd_port_id_type;
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/sirc.h b/arch/arm/mach-msm/include/mach/sirc.h
deleted file mode 100644
index ef55868a5b8a..000000000000
--- a/arch/arm/mach-msm/include/mach/sirc.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_SIRC_H
-#define __ASM_ARCH_MSM_SIRC_H
-
-struct sirc_regs_t {
-	void    *int_enable;
-	void    *int_enable_clear;
-	void    *int_enable_set;
-	void    *int_type;
-	void    *int_polarity;
-	void    *int_clear;
-};
-
-struct sirc_cascade_regs {
-	void    *int_status;
-	unsigned int    cascade_irq;
-};
-
-void msm_init_sirc(void);
-void msm_sirc_enter_sleep(void);
-void msm_sirc_exit_sleep(void);
-
-#if defined(CONFIG_ARCH_MSM_SCORPION)
-
-#include <mach/msm_iomap.h>
-
-/*
- * Secondary interrupt controller interrupts
- */
-
-#define FIRST_SIRC_IRQ (NR_MSM_IRQS + NR_GPIO_IRQS)
-
-#define INT_UART1                     (FIRST_SIRC_IRQ + 0)
-#define INT_UART2                     (FIRST_SIRC_IRQ + 1)
-#define INT_UART3                     (FIRST_SIRC_IRQ + 2)
-#define INT_UART1_RX                  (FIRST_SIRC_IRQ + 3)
-#define INT_UART2_RX                  (FIRST_SIRC_IRQ + 4)
-#define INT_UART3_RX                  (FIRST_SIRC_IRQ + 5)
-#define INT_SPI_INPUT                 (FIRST_SIRC_IRQ + 6)
-#define INT_SPI_OUTPUT                (FIRST_SIRC_IRQ + 7)
-#define INT_SPI_ERROR                 (FIRST_SIRC_IRQ + 8)
-#define INT_GPIO_GROUP1               (FIRST_SIRC_IRQ + 9)
-#define INT_GPIO_GROUP2               (FIRST_SIRC_IRQ + 10)
-#define INT_GPIO_GROUP1_SECURE        (FIRST_SIRC_IRQ + 11)
-#define INT_GPIO_GROUP2_SECURE        (FIRST_SIRC_IRQ + 12)
-#define INT_AVS_SVIC                  (FIRST_SIRC_IRQ + 13)
-#define INT_AVS_REQ_UP                (FIRST_SIRC_IRQ + 14)
-#define INT_AVS_REQ_DOWN              (FIRST_SIRC_IRQ + 15)
-#define INT_PBUS_ERR                  (FIRST_SIRC_IRQ + 16)
-#define INT_AXI_ERR                   (FIRST_SIRC_IRQ + 17)
-#define INT_SMI_ERR                   (FIRST_SIRC_IRQ + 18)
-#define INT_EBI1_ERR                  (FIRST_SIRC_IRQ + 19)
-#define INT_IMEM_ERR                  (FIRST_SIRC_IRQ + 20)
-#define INT_TEMP_SENSOR               (FIRST_SIRC_IRQ + 21)
-#define INT_TV_ENC                    (FIRST_SIRC_IRQ + 22)
-#define INT_GRP2D                     (FIRST_SIRC_IRQ + 23)
-#define INT_GSBI_QUP                  (FIRST_SIRC_IRQ + 24)
-#define INT_SC_ACG                    (FIRST_SIRC_IRQ + 25)
-#define INT_WDT0                      (FIRST_SIRC_IRQ + 26)
-#define INT_WDT1                      (FIRST_SIRC_IRQ + 27)
-
-#if defined(CONFIG_MSM_SOC_REV_A)
-#define NR_SIRC_IRQS                  28
-#define SIRC_MASK                     0x0FFFFFFF
-#else
-#define NR_SIRC_IRQS                  23
-#define SIRC_MASK                     0x007FFFFF
-#endif
-
-#define LAST_SIRC_IRQ                 (FIRST_SIRC_IRQ + NR_SIRC_IRQS - 1)
-
-#define SPSS_SIRC_INT_SELECT          (MSM_SIRC_BASE + 0x00)
-#define SPSS_SIRC_INT_ENABLE          (MSM_SIRC_BASE + 0x04)
-#define SPSS_SIRC_INT_ENABLE_CLEAR    (MSM_SIRC_BASE + 0x08)
-#define SPSS_SIRC_INT_ENABLE_SET      (MSM_SIRC_BASE + 0x0C)
-#define SPSS_SIRC_INT_TYPE            (MSM_SIRC_BASE + 0x10)
-#define SPSS_SIRC_INT_POLARITY        (MSM_SIRC_BASE + 0x14)
-#define SPSS_SIRC_SECURITY            (MSM_SIRC_BASE + 0x18)
-#define SPSS_SIRC_IRQ_STATUS          (MSM_SIRC_BASE + 0x1C)
-#define SPSS_SIRC_IRQ1_STATUS         (MSM_SIRC_BASE + 0x20)
-#define SPSS_SIRC_RAW_STATUS          (MSM_SIRC_BASE + 0x24)
-#define SPSS_SIRC_INT_CLEAR           (MSM_SIRC_BASE + 0x28)
-#define SPSS_SIRC_SOFT_INT            (MSM_SIRC_BASE + 0x2C)
-
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h
deleted file mode 100644
index 6626e7864e28..000000000000
--- a/arch/arm/mach-msm/include/mach/vreg.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/arch-msm/vreg.h
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_VREG_H
-#define __ARCH_ARM_MACH_MSM_VREG_H
-
-struct vreg;
-
-struct vreg *vreg_get(struct device *dev, const char *id);
-void vreg_put(struct vreg *vreg);
-
-int vreg_enable(struct vreg *vreg);
-int vreg_disable(struct vreg *vreg);
-int vreg_set_level(struct vreg *vreg, unsigned mv);
-
-#endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
deleted file mode 100644
index b042dca1f633..000000000000
--- a/arch/arm/mach-msm/io.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* arch/arm/mach-msm/io.c
- *
- * MSM7K, QSD io support
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <mach/msm_iomap.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) {			      \
-		.virtual = (unsigned long) MSM_##name##_BASE, \
-		.pfn = __phys_to_pfn(chip##_##name##_PHYS), \
-		.length = chip##_##name##_SIZE, \
-		.type = mem_type, \
-	 }
-
-#define MSM_DEVICE_TYPE(name, mem_type) \
-		MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type)
-#define MSM_CHIP_DEVICE(name, chip) \
-		MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
-#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
-
-#if defined(CONFIG_ARCH_MSM7X00A)
-static struct map_desc msm_io_desc[] __initdata = {
-	MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
-	MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
-	MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED),
-	MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
-	MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
-	MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
-	{
-		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
-		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
-		.length =   MSM_SHARED_RAM_SIZE,
-		.type =     MT_DEVICE,
-	},
-#if defined(CONFIG_DEBUG_MSM_UART)
-	{
-		/* Must be last: virtual and pfn filled in by debug_ll_addr() */
-		.length = SZ_4K,
-		.type = MT_DEVICE_NONSHARED,
-	}
-#endif
-};
-
-void __init msm_map_common_io(void)
-{
-	size_t size = ARRAY_SIZE(msm_io_desc);
-
-	/* Make sure the peripheral register window is closed, since
-	 * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which
-	 * pages are peripheral interface or not.
-	 */
-	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
-#if defined(CONFIG_DEBUG_MSM_UART)
-#ifdef CONFIG_MMU
-	debug_ll_addr(&msm_io_desc[size - 1].pfn,
-		      &msm_io_desc[size - 1].virtual);
-#endif
-	msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn);
-#endif
-	iotable_init(msm_io_desc, size);
-}
-#endif
-
-#ifdef CONFIG_ARCH_QSD8X50
-static struct map_desc qsd8x50_io_desc[] __initdata = {
-	MSM_DEVICE(VIC),
-	MSM_CHIP_DEVICE(CSR, QSD8X50),
-	MSM_DEVICE(DMOV),
-	MSM_CHIP_DEVICE(GPIO1, QSD8X50),
-	MSM_CHIP_DEVICE(GPIO2, QSD8X50),
-	MSM_DEVICE(CLK_CTL),
-	MSM_DEVICE(SIRC),
-	MSM_DEVICE(SCPLL),
-	MSM_DEVICE(AD5),
-	MSM_DEVICE(MDC),
-	{
-		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
-		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
-		.length =   MSM_SHARED_RAM_SIZE,
-		.type =     MT_DEVICE,
-	},
-};
-
-void __init msm_map_qsd8x50_io(void)
-{
-	debug_ll_io_init();
-	iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc));
-}
-#endif /* CONFIG_ARCH_QSD8X50 */
-
-#ifdef CONFIG_ARCH_MSM7X30
-static struct map_desc msm7x30_io_desc[] __initdata = {
-	MSM_DEVICE(VIC),
-	MSM_CHIP_DEVICE(CSR, MSM7X30),
-	MSM_DEVICE(DMOV),
-	MSM_CHIP_DEVICE(GPIO1, MSM7X30),
-	MSM_CHIP_DEVICE(GPIO2, MSM7X30),
-	MSM_DEVICE(CLK_CTL),
-	MSM_DEVICE(CLK_CTL_SH2),
-	MSM_DEVICE(AD5),
-	MSM_DEVICE(MDC),
-	MSM_DEVICE(ACC),
-	MSM_DEVICE(SAW),
-	MSM_DEVICE(GCC),
-	MSM_DEVICE(TCSR),
-	{
-		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
-		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
-		.length =   MSM_SHARED_RAM_SIZE,
-		.type =     MT_DEVICE,
-	},
-};
-
-void __init msm_map_msm7x30_io(void)
-{
-	debug_ll_io_init();
-	iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc));
-}
-#endif /* CONFIG_ARCH_MSM7X30 */
-
-#ifdef CONFIG_ARCH_MSM7X00A
-void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
-				   unsigned int mtype, void *caller)
-{
-	if (mtype == MT_DEVICE) {
-		/* The peripherals in the 88000000 - D0000000 range
-		 * are only accessible by type MT_DEVICE_NONSHARED.
-		 * Adjust mtype as necessary to make this "just work."
-		 */
-		if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
-			mtype = MT_DEVICE_NONSHARED;
-	}
-
-	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
-}
-#endif
diff --git a/arch/arm/mach-msm/irq-vic.c b/arch/arm/mach-msm/irq-vic.c
deleted file mode 100644
index 1b54f807c2d0..000000000000
--- a/arch/arm/mach-msm/irq-vic.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-
-#include <mach/msm_iomap.h>
-
-#include "smd_private.h"
-
-enum {
-	IRQ_DEBUG_SLEEP_INT_TRIGGER = 1U << 0,
-	IRQ_DEBUG_SLEEP_INT = 1U << 1,
-	IRQ_DEBUG_SLEEP_ABORT = 1U << 2,
-	IRQ_DEBUG_SLEEP = 1U << 3,
-	IRQ_DEBUG_SLEEP_REQUEST = 1U << 4,
-};
-static int msm_irq_debug_mask;
-module_param_named(debug_mask, msm_irq_debug_mask, int,
-		   S_IRUGO | S_IWUSR | S_IWGRP);
-
-#define VIC_REG(off) (MSM_VIC_BASE + (off))
-#define VIC_INT_TO_REG_ADDR(base, irq) (base + (irq / 32) * 4)
-#define VIC_INT_TO_REG_INDEX(irq) ((irq >> 5) & 3)
-
-#define VIC_INT_SELECT0     VIC_REG(0x0000)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT1     VIC_REG(0x0004)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT2     VIC_REG(0x0008)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT3     VIC_REG(0x000C)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_EN0         VIC_REG(0x0010)
-#define VIC_INT_EN1         VIC_REG(0x0014)
-#define VIC_INT_EN2         VIC_REG(0x0018)
-#define VIC_INT_EN3         VIC_REG(0x001C)
-#define VIC_INT_ENCLEAR0    VIC_REG(0x0020)
-#define VIC_INT_ENCLEAR1    VIC_REG(0x0024)
-#define VIC_INT_ENCLEAR2    VIC_REG(0x0028)
-#define VIC_INT_ENCLEAR3    VIC_REG(0x002C)
-#define VIC_INT_ENSET0      VIC_REG(0x0030)
-#define VIC_INT_ENSET1      VIC_REG(0x0034)
-#define VIC_INT_ENSET2      VIC_REG(0x0038)
-#define VIC_INT_ENSET3      VIC_REG(0x003C)
-#define VIC_INT_TYPE0       VIC_REG(0x0040)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_TYPE1       VIC_REG(0x0044)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_TYPE2       VIC_REG(0x0048)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_TYPE3       VIC_REG(0x004C)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_POLARITY0   VIC_REG(0x0050)  /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY1   VIC_REG(0x0054)  /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY2   VIC_REG(0x0058)  /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY3   VIC_REG(0x005C)  /* 1: NEG, 0: POS */
-#define VIC_NO_PEND_VAL     VIC_REG(0x0060)
-
-#if defined(CONFIG_ARCH_MSM_SCORPION)
-#define VIC_NO_PEND_VAL_FIQ VIC_REG(0x0064)
-#define VIC_INT_MASTEREN    VIC_REG(0x0068)  /* 1: IRQ, 2: FIQ     */
-#define VIC_CONFIG          VIC_REG(0x006C)  /* 1: USE SC VIC */
-#else
-#define VIC_INT_MASTEREN    VIC_REG(0x0064)  /* 1: IRQ, 2: FIQ     */
-#define VIC_PROTECTION      VIC_REG(0x006C)  /* 1: ENABLE          */
-#define VIC_CONFIG          VIC_REG(0x0068)  /* 1: USE ARM1136 VIC */
-#endif
-
-#define VIC_IRQ_STATUS0     VIC_REG(0x0080)
-#define VIC_IRQ_STATUS1     VIC_REG(0x0084)
-#define VIC_IRQ_STATUS2     VIC_REG(0x0088)
-#define VIC_IRQ_STATUS3     VIC_REG(0x008C)
-#define VIC_FIQ_STATUS0     VIC_REG(0x0090)
-#define VIC_FIQ_STATUS1     VIC_REG(0x0094)
-#define VIC_FIQ_STATUS2     VIC_REG(0x0098)
-#define VIC_FIQ_STATUS3     VIC_REG(0x009C)
-#define VIC_RAW_STATUS0     VIC_REG(0x00A0)
-#define VIC_RAW_STATUS1     VIC_REG(0x00A4)
-#define VIC_RAW_STATUS2     VIC_REG(0x00A8)
-#define VIC_RAW_STATUS3     VIC_REG(0x00AC)
-#define VIC_INT_CLEAR0      VIC_REG(0x00B0)
-#define VIC_INT_CLEAR1      VIC_REG(0x00B4)
-#define VIC_INT_CLEAR2      VIC_REG(0x00B8)
-#define VIC_INT_CLEAR3      VIC_REG(0x00BC)
-#define VIC_SOFTINT0        VIC_REG(0x00C0)
-#define VIC_SOFTINT1        VIC_REG(0x00C4)
-#define VIC_SOFTINT2        VIC_REG(0x00C8)
-#define VIC_SOFTINT3        VIC_REG(0x00CC)
-#define VIC_IRQ_VEC_RD      VIC_REG(0x00D0)  /* pending int # */
-#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4)  /* pending vector addr */
-#define VIC_IRQ_VEC_WR      VIC_REG(0x00D8)
-
-#if defined(CONFIG_ARCH_MSM_SCORPION)
-#define VIC_FIQ_VEC_RD      VIC_REG(0x00DC)
-#define VIC_FIQ_VEC_PEND_RD VIC_REG(0x00E0)
-#define VIC_FIQ_VEC_WR      VIC_REG(0x00E4)
-#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E8)
-#define VIC_IRQ_IN_STACK    VIC_REG(0x00EC)
-#define VIC_FIQ_IN_SERVICE  VIC_REG(0x00F0)
-#define VIC_FIQ_IN_STACK    VIC_REG(0x00F4)
-#define VIC_TEST_BUS_SEL    VIC_REG(0x00F8)
-#define VIC_IRQ_CTRL_CONFIG VIC_REG(0x00FC)
-#else
-#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E0)
-#define VIC_IRQ_IN_STACK    VIC_REG(0x00E4)
-#define VIC_TEST_BUS_SEL    VIC_REG(0x00E8)
-#endif
-
-#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
-#define VIC_VECTADDR(n)     VIC_REG(0x0400+((n) * 4))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define VIC_NUM_REGS	    4
-#else
-#define VIC_NUM_REGS	    2
-#endif
-
-#if VIC_NUM_REGS == 2
-#define DPRINT_REGS(base_reg, format, ...)	      			\
-	printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__,		\
-			readl(base_reg ## 0), readl(base_reg ## 1))
-#define DPRINT_ARRAY(array, format, ...)				\
-	printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__,		\
-			array[0], array[1])
-#elif VIC_NUM_REGS == 4
-#define DPRINT_REGS(base_reg, format, ...) \
-	printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__,	\
-			readl(base_reg ## 0), readl(base_reg ## 1),	\
-			readl(base_reg ## 2), readl(base_reg ## 3))
-#define DPRINT_ARRAY(array, format, ...)				\
-	printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__,	\
-			array[0], array[1],				\
-			array[2], array[3])
-#else
-#error "VIC_NUM_REGS set to illegal value"
-#endif
-
-static uint32_t msm_irq_smsm_wake_enable[2];
-static struct {
-	uint32_t int_en[2];
-	uint32_t int_type;
-	uint32_t int_polarity;
-	uint32_t int_select;
-} msm_irq_shadow_reg[VIC_NUM_REGS];
-static uint32_t msm_irq_idle_disable[VIC_NUM_REGS];
-
-#define SMSM_FAKE_IRQ (0xff)
-static uint8_t msm_irq_to_smsm[NR_IRQS] = {
-	[INT_MDDI_EXT] = 1,
-	[INT_MDDI_PRI] = 2,
-	[INT_MDDI_CLIENT] = 3,
-	[INT_USB_OTG] = 4,
-
-	[INT_PWB_I2C] = 5,
-	[INT_SDC1_0] = 6,
-	[INT_SDC1_1] = 7,
-	[INT_SDC2_0] = 8,
-
-	[INT_SDC2_1] = 9,
-	[INT_ADSP_A9_A11] = 10,
-	[INT_UART1] = 11,
-	[INT_UART2] = 12,
-
-	[INT_UART3] = 13,
-	[INT_UART1_RX] = 14,
-	[INT_UART2_RX] = 15,
-	[INT_UART3_RX] = 16,
-
-	[INT_UART1DM_IRQ] = 17,
-	[INT_UART1DM_RX] = 18,
-	[INT_KEYSENSE] = 19,
-#if !defined(CONFIG_ARCH_MSM7X30)
-	[INT_AD_HSSD] = 20,
-#endif
-
-	[INT_NAND_WR_ER_DONE] = 21,
-	[INT_NAND_OP_DONE] = 22,
-	[INT_TCHSCRN1] = 23,
-	[INT_TCHSCRN2] = 24,
-
-	[INT_TCHSCRN_SSBI] = 25,
-	[INT_USB_HS] = 26,
-	[INT_UART2DM_RX] = 27,
-	[INT_UART2DM_IRQ] = 28,
-
-	[INT_SDC4_1] = 29,
-	[INT_SDC4_0] = 30,
-	[INT_SDC3_1] = 31,
-	[INT_SDC3_0] = 32,
-
-	/* fake wakeup interrupts */
-	[INT_GPIO_GROUP1] = SMSM_FAKE_IRQ,
-	[INT_GPIO_GROUP2] = SMSM_FAKE_IRQ,
-	[INT_A9_M2A_0] = SMSM_FAKE_IRQ,
-	[INT_A9_M2A_1] = SMSM_FAKE_IRQ,
-	[INT_A9_M2A_5] = SMSM_FAKE_IRQ,
-	[INT_GP_TIMER_EXP] = SMSM_FAKE_IRQ,
-	[INT_DEBUG_TIMER_EXP] = SMSM_FAKE_IRQ,
-	[INT_ADSP_A11] = SMSM_FAKE_IRQ,
-#ifdef CONFIG_ARCH_QSD8X50
-	[INT_SIRC_0] = SMSM_FAKE_IRQ,
-	[INT_SIRC_1] = SMSM_FAKE_IRQ,
-#endif
-};
-
-static inline void msm_irq_write_all_regs(void __iomem *base, unsigned int val)
-{
-	int i;
-
-	for (i = 0; i < VIC_NUM_REGS; i++)
-		writel(val, base + (i * 4));
-}
-
-static void msm_irq_ack(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_CLEAR0, d->irq);
-	writel(1 << (d->irq & 31), reg);
-}
-
-static void msm_irq_mask(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENCLEAR0, d->irq);
-	unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
-	uint32_t mask = 1UL << (d->irq & 31);
-	int smsm_irq = msm_irq_to_smsm[d->irq];
-
-	msm_irq_shadow_reg[index].int_en[0] &= ~mask;
-	writel(mask, reg);
-	if (smsm_irq == 0)
-		msm_irq_idle_disable[index] &= ~mask;
-	else {
-		mask = 1UL << (smsm_irq - 1);
-		msm_irq_smsm_wake_enable[0] &= ~mask;
-	}
-}
-
-static void msm_irq_unmask(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENSET0, d->irq);
-	unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
-	uint32_t mask = 1UL << (d->irq & 31);
-	int smsm_irq = msm_irq_to_smsm[d->irq];
-
-	msm_irq_shadow_reg[index].int_en[0] |= mask;
-	writel(mask, reg);
-
-	if (smsm_irq == 0)
-		msm_irq_idle_disable[index] |= mask;
-	else {
-		mask = 1UL << (smsm_irq - 1);
-		msm_irq_smsm_wake_enable[0] |= mask;
-	}
-}
-
-static int msm_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
-	uint32_t mask = 1UL << (d->irq & 31);
-	int smsm_irq = msm_irq_to_smsm[d->irq];
-
-	if (smsm_irq == 0) {
-		printk(KERN_ERR "msm_irq_set_wake: bad wakeup irq %d\n", d->irq);
-		return -EINVAL;
-	}
-	if (on)
-		msm_irq_shadow_reg[index].int_en[1] |= mask;
-	else
-		msm_irq_shadow_reg[index].int_en[1] &= ~mask;
-
-	if (smsm_irq == SMSM_FAKE_IRQ)
-		return 0;
-
-	mask = 1UL << (smsm_irq - 1);
-	if (on)
-		msm_irq_smsm_wake_enable[1] |= mask;
-	else
-		msm_irq_smsm_wake_enable[1] &= ~mask;
-	return 0;
-}
-
-static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	void __iomem *treg = VIC_INT_TO_REG_ADDR(VIC_INT_TYPE0, d->irq);
-	void __iomem *preg = VIC_INT_TO_REG_ADDR(VIC_INT_POLARITY0, d->irq);
-	unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
-	int b = 1 << (d->irq & 31);
-	uint32_t polarity;
-	uint32_t type;
-
-	polarity = msm_irq_shadow_reg[index].int_polarity;
-	if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
-		polarity |= b;
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
-		polarity &= ~b;
-	writel(polarity, preg);
-	msm_irq_shadow_reg[index].int_polarity = polarity;
-
-	type = msm_irq_shadow_reg[index].int_type;
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
-		type |= b;
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-	}
-	if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
-		type &= ~b;
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-	}
-	writel(type, treg);
-	msm_irq_shadow_reg[index].int_type = type;
-	return 0;
-}
-
-static struct irq_chip msm_irq_chip = {
-	.name          = "msm",
-	.irq_disable   = msm_irq_mask,
-	.irq_ack       = msm_irq_ack,
-	.irq_mask      = msm_irq_mask,
-	.irq_unmask    = msm_irq_unmask,
-	.irq_set_wake  = msm_irq_set_wake,
-	.irq_set_type  = msm_irq_set_type,
-};
-
-void __init msm_init_irq(void)
-{
-	unsigned n;
-
-	/* select level interrupts */
-	msm_irq_write_all_regs(VIC_INT_TYPE0, 0);
-
-	/* select highlevel interrupts */
-	msm_irq_write_all_regs(VIC_INT_POLARITY0, 0);
-
-	/* select IRQ for all INTs */
-	msm_irq_write_all_regs(VIC_INT_SELECT0, 0);
-
-	/* disable all INTs */
-	msm_irq_write_all_regs(VIC_INT_EN0, 0);
-
-	/* don't use vic */
-	writel(0, VIC_CONFIG);
-
-	/* enable interrupt controller */
-	writel(3, VIC_INT_MASTEREN);
-
-	for (n = 0; n < NR_MSM_IRQS; n++) {
-		irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq);
-		set_irq_flags(n, IRQF_VALID);
-	}
-}
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
deleted file mode 100644
index ea514be390c6..000000000000
--- a/arch/arm/mach-msm/irq.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/arch/arm/mach-msm/irq.c
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <mach/msm_iomap.h>
-
-#define VIC_REG(off) (MSM_VIC_BASE + (off))
-
-#define VIC_INT_SELECT0     VIC_REG(0x0000)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT1     VIC_REG(0x0004)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_EN0         VIC_REG(0x0010)
-#define VIC_INT_EN1         VIC_REG(0x0014)
-#define VIC_INT_ENCLEAR0    VIC_REG(0x0020)
-#define VIC_INT_ENCLEAR1    VIC_REG(0x0024)
-#define VIC_INT_ENSET0      VIC_REG(0x0030)
-#define VIC_INT_ENSET1      VIC_REG(0x0034)
-#define VIC_INT_TYPE0       VIC_REG(0x0040)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_TYPE1       VIC_REG(0x0044)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_POLARITY0   VIC_REG(0x0050)  /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY1   VIC_REG(0x0054)  /* 1: NEG, 0: POS */
-#define VIC_NO_PEND_VAL     VIC_REG(0x0060)
-#define VIC_INT_MASTEREN    VIC_REG(0x0064)  /* 1: IRQ, 2: FIQ     */
-#define VIC_PROTECTION      VIC_REG(0x006C)  /* 1: ENABLE          */
-#define VIC_CONFIG          VIC_REG(0x0068)  /* 1: USE ARM1136 VIC */
-#define VIC_IRQ_STATUS0     VIC_REG(0x0080)
-#define VIC_IRQ_STATUS1     VIC_REG(0x0084)
-#define VIC_FIQ_STATUS0     VIC_REG(0x0090)
-#define VIC_FIQ_STATUS1     VIC_REG(0x0094)
-#define VIC_RAW_STATUS0     VIC_REG(0x00A0)
-#define VIC_RAW_STATUS1     VIC_REG(0x00A4)
-#define VIC_INT_CLEAR0      VIC_REG(0x00B0)
-#define VIC_INT_CLEAR1      VIC_REG(0x00B4)
-#define VIC_SOFTINT0        VIC_REG(0x00C0)
-#define VIC_SOFTINT1        VIC_REG(0x00C4)
-#define VIC_IRQ_VEC_RD      VIC_REG(0x00D0)  /* pending int # */
-#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4)  /* pending vector addr */
-#define VIC_IRQ_VEC_WR      VIC_REG(0x00D8)
-#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E0)
-#define VIC_IRQ_IN_STACK    VIC_REG(0x00E4)
-#define VIC_TEST_BUS_SEL    VIC_REG(0x00E8)
-
-#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
-#define VIC_VECTADDR(n)     VIC_REG(0x0400+((n) * 4))
-
-static void msm_irq_ack(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_CLEAR0 + ((d->irq & 32) ? 4 : 0);
-	writel(1 << (d->irq & 31), reg);
-}
-
-static void msm_irq_mask(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_ENCLEAR0 + ((d->irq & 32) ? 4 : 0);
-	writel(1 << (d->irq & 31), reg);
-}
-
-static void msm_irq_unmask(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_ENSET0 + ((d->irq & 32) ? 4 : 0);
-	writel(1 << (d->irq & 31), reg);
-}
-
-static int msm_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	return -EINVAL;
-}
-
-static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	void __iomem *treg = VIC_INT_TYPE0 + ((d->irq & 32) ? 4 : 0);
-	void __iomem *preg = VIC_INT_POLARITY0 + ((d->irq & 32) ? 4 : 0);
-	int b = 1 << (d->irq & 31);
-
-	if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
-		writel(readl(preg) | b, preg);
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
-		writel(readl(preg) & (~b), preg);
-
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
-		writel(readl(treg) | b, treg);
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-	}
-	if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
-		writel(readl(treg) & (~b), treg);
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-	}
-	return 0;
-}
-
-static struct irq_chip msm_irq_chip = {
-	.name          = "msm",
-	.irq_ack       = msm_irq_ack,
-	.irq_mask      = msm_irq_mask,
-	.irq_unmask    = msm_irq_unmask,
-	.irq_set_wake  = msm_irq_set_wake,
-	.irq_set_type  = msm_irq_set_type,
-};
-
-void __init msm_init_irq(void)
-{
-	unsigned n;
-
-	/* select level interrupts */
-	writel(0, VIC_INT_TYPE0);
-	writel(0, VIC_INT_TYPE1);
-
-	/* select highlevel interrupts */
-	writel(0, VIC_INT_POLARITY0);
-	writel(0, VIC_INT_POLARITY1);
-
-	/* select IRQ for all INTs */
-	writel(0, VIC_INT_SELECT0);
-	writel(0, VIC_INT_SELECT1);
-
-	/* disable all INTs */
-	writel(0, VIC_INT_EN0);
-	writel(0, VIC_INT_EN1);
-
-	/* don't use 1136 vic */
-	writel(0, VIC_CONFIG);
-
-	/* enable interrupt controller */
-	writel(1, VIC_INT_MASTEREN);
-
-	for (n = 0; n < NR_MSM_IRQS; n++) {
-		irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq);
-		set_irq_flags(n, IRQF_VALID);
-	}
-}
diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c
deleted file mode 100644
index 9c392a29fc7e..000000000000
--- a/arch/arm/mach-msm/last_radio_log.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* arch/arm/mach-msm/last_radio_log.c
- *
- * Extract the log from a modem crash though SMEM
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
-
-#include "smd_private.h"
-
-static void *radio_log_base;
-static size_t radio_log_size;
-
-extern void *smem_item(unsigned id, unsigned *size);
-
-static ssize_t last_radio_log_read(struct file *file, char __user *buf,
-			size_t len, loff_t *offset)
-{
-	return simple_read_from_buffer(buf, len, offset,
-				radio_log_base, radio_log_size);
-}
-
-static struct file_operations last_radio_log_fops = {
-	.read = last_radio_log_read,
-	.llseek = default_llseek,
-};
-
-void msm_init_last_radio_log(struct module *owner)
-{
-	struct proc_dir_entry *entry;
-
-	if (last_radio_log_fops.owner) {
-		pr_err("%s: already claimed\n", __func__);
-		return;
-	}
-
-	radio_log_base = smem_item(SMEM_CLKREGIM_BSP, &radio_log_size);
-	if (!radio_log_base) {
-		pr_err("%s: could not retrieve SMEM_CLKREGIM_BSP\n", __func__);
-		return;
-	}
-
-	entry = proc_create("last_radio_log", S_IRUGO, NULL,
-				&last_radio_log_fops);
-	if (!entry) {
-		pr_err("%s: could not create proc entry for radio log\n",
-				__func__);
-		return;
-	}
-
-	pr_err("%s: last radio log is %d bytes long\n", __func__,
-		radio_log_size);
-	last_radio_log_fops.owner = owner;
-	proc_set_size(entry, radio_log_size);
-}
-EXPORT_SYMBOL(msm_init_last_radio_log);
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
deleted file mode 100644
index 507f5ca80697..000000000000
--- a/arch/arm/mach-msm/proc_comm.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/* arch/arm/mach-msm/proc_comm.c
- *
- * Copyright (C) 2007-2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/msm_iomap.h>
-
-#include "proc_comm.h"
-
-static inline void msm_a2m_int(uint32_t irq)
-{
-#if defined(CONFIG_ARCH_MSM7X30)
-	writel(1 << irq, MSM_GCC_BASE + 0x8);
-#else
-	writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
-#endif
-}
-
-static inline void notify_other_proc_comm(void)
-{
-	msm_a2m_int(6);
-}
-
-#define APP_COMMAND 0x00
-#define APP_STATUS  0x04
-#define APP_DATA1   0x08
-#define APP_DATA2   0x0C
-
-#define MDM_COMMAND 0x10
-#define MDM_STATUS  0x14
-#define MDM_DATA1   0x18
-#define MDM_DATA2   0x1C
-
-static DEFINE_SPINLOCK(proc_comm_lock);
-
-/* The higher level SMD support will install this to
- * provide a way to check for and handle modem restart.
- */
-int (*msm_check_for_modem_crash)(void);
-
-/* Poll for a state change, checking for possible
- * modem crashes along the way (so we don't wait
- * forever while the ARM9 is blowing up).
- *
- * Return an error in the event of a modem crash and
- * restart so the msm_proc_comm() routine can restart
- * the operation from the beginning.
- */
-static int proc_comm_wait_for(void __iomem *addr, unsigned value)
-{
-	for (;;) {
-		if (readl(addr) == value)
-			return 0;
-
-		if (msm_check_for_modem_crash)
-			if (msm_check_for_modem_crash())
-				return -EAGAIN;
-	}
-}
-
-int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
-{
-	void __iomem *base = MSM_SHARED_RAM_BASE;
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&proc_comm_lock, flags);
-
-	for (;;) {
-		if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY))
-			continue;
-
-		writel(cmd, base + APP_COMMAND);
-		writel(data1 ? *data1 : 0, base + APP_DATA1);
-		writel(data2 ? *data2 : 0, base + APP_DATA2);
-
-		notify_other_proc_comm();
-
-		if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE))
-			continue;
-
-		if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) {
-			if (data1)
-				*data1 = readl(base + APP_DATA1);
-			if (data2)
-				*data2 = readl(base + APP_DATA2);
-			ret = 0;
-		} else {
-			ret = -EIO;
-		}
-		break;
-	}
-
-	writel(PCOM_CMD_IDLE, base + APP_COMMAND);
-
-	spin_unlock_irqrestore(&proc_comm_lock, flags);
-
-	return ret;
-}
-
-/*
- * We need to wait for the ARM9 to at least partially boot
- * up before we can continue. Since the ARM9 does resource
- * allocation, if we dont' wait we could end up crashing or in
- * and unknown state. This function should be called early to
- * wait on the ARM9.
- */
-void proc_comm_boot_wait(void)
-{
-	void __iomem *base = MSM_SHARED_RAM_BASE;
- 
-	proc_comm_wait_for(base + MDM_STATUS, PCOM_READY);
- 
-}
diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h
deleted file mode 100644
index e8d043a0e990..000000000000
--- a/arch/arm/mach-msm/proc_comm.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* arch/arm/mach-msm/proc_comm.h
- *
- * Copyright (c) 2007 QUALCOMM Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
-#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
-
-#include <linux/init.h>
-
-enum {
-	PCOM_CMD_IDLE = 0x0,
-	PCOM_CMD_DONE,
-	PCOM_RESET_APPS,
-	PCOM_RESET_CHIP,
-	PCOM_CONFIG_NAND_MPU,
-	PCOM_CONFIG_USB_CLKS,
-	PCOM_GET_POWER_ON_STATUS,
-	PCOM_GET_WAKE_UP_STATUS,
-	PCOM_GET_BATT_LEVEL,
-	PCOM_CHG_IS_CHARGING,
-	PCOM_POWER_DOWN,
-	PCOM_USB_PIN_CONFIG,
-	PCOM_USB_PIN_SEL,
-	PCOM_SET_RTC_ALARM,
-	PCOM_NV_READ,
-	PCOM_NV_WRITE,
-	PCOM_GET_UUID_HIGH,
-	PCOM_GET_UUID_LOW,
-	PCOM_GET_HW_ENTROPY,
-	PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE,
-	PCOM_CLKCTL_RPC_ENABLE,
-	PCOM_CLKCTL_RPC_DISABLE,
-	PCOM_CLKCTL_RPC_RESET,
-	PCOM_CLKCTL_RPC_SET_FLAGS,
-	PCOM_CLKCTL_RPC_SET_RATE,
-	PCOM_CLKCTL_RPC_MIN_RATE,
-	PCOM_CLKCTL_RPC_MAX_RATE,
-	PCOM_CLKCTL_RPC_RATE,
-	PCOM_CLKCTL_RPC_PLL_REQUEST,
-	PCOM_CLKCTL_RPC_ENABLED,
-	PCOM_VREG_SWITCH,
-	PCOM_VREG_SET_LEVEL,
-	PCOM_GPIO_TLMM_CONFIG_GROUP,
-	PCOM_GPIO_TLMM_UNCONFIG_GROUP,
-	PCOM_NV_WRITE_BYTES_4_7,
-	PCOM_CONFIG_DISP,
-	PCOM_GET_FTM_BOOT_COUNT,
-	PCOM_RPC_GPIO_TLMM_CONFIG_EX,
-	PCOM_PM_MPP_CONFIG,
-	PCOM_GPIO_IN,
-	PCOM_GPIO_OUT,
-	PCOM_RESET_MODEM,
-	PCOM_RESET_CHIP_IMM,
-	PCOM_PM_VID_EN,
-	PCOM_VREG_PULLDOWN,
-	PCOM_GET_MODEM_VERSION,
-	PCOM_CLK_REGIME_SEC_RESET,
-	PCOM_CLK_REGIME_SEC_RESET_ASSERT,
-	PCOM_CLK_REGIME_SEC_RESET_DEASSERT,
-	PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP,
-	PCOM_CLK_REGIME_SEC_ENABLE,
-	PCOM_CLK_REGIME_SEC_DISABLE,
-	PCOM_CLK_REGIME_SEC_IS_ON,
-	PCOM_CLK_REGIME_SEC_SEL_CLK_INV,
-	PCOM_CLK_REGIME_SEC_SEL_CLK_SRC,
-	PCOM_CLK_REGIME_SEC_SEL_CLK_DIV,
-	PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE,
-	PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE,
-	PCOM_CLK_REGIME_SEC_SEL_SPEED,
-	PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP,
-	PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP,
-	PCOM_CLK_REGIME_SEC_USB_XTAL_ON,
-	PCOM_CLK_REGIME_SEC_USB_XTAL_OFF,
-	PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE,
-	PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK,
-	PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ,
-	PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ,
-	PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ,
-	PCOM_CLK_REGIME_SEC_SEL_VFE_SRC,
-	PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK,
-	PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK,
-	PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF,
-	PCOM_CLK_REGIME_SEC_VFE_RAIL_ON,
-	PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF,
-	PCOM_CLK_REGIME_SEC_GRP_RAIL_ON,
-	PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF,
-	PCOM_CLK_REGIME_SEC_VDC_RAIL_ON,
-	PCOM_CLK_REGIME_SEC_LCD_CTRL,
-	PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE,
-	PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE,
-	PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP,
-	PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER,
-	PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP,
-	PCOM_GPIO_CONFIG,
-	PCOM_GPIO_CONFIGURE_GROUP,
-	PCOM_GPIO_TLMM_SET_PORT,
-	PCOM_GPIO_TLMM_CONFIG_EX,
-	PCOM_SET_FTM_BOOT_COUNT,
-	PCOM_RESERVED0,
-	PCOM_RESERVED1,
-	PCOM_CUSTOMER_CMD1,
-	PCOM_CUSTOMER_CMD2,
-	PCOM_CUSTOMER_CMD3,
-	PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE,
-	PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE,
-	PCOM_CLK_REGIME_SEC_RAIL_DISABLE,
-	PCOM_CLK_REGIME_SEC_RAIL_ENABLE,
-	PCOM_CLK_REGIME_SEC_RAIL_CONTROL,
-	PCOM_SET_SW_WATCHDOG_STATE,
-	PCOM_PM_MPP_CONFIG_DIGITAL_INPUT,
-	PCOM_PM_MPP_CONFIG_I_SINK,
-	PCOM_RESERVED_101,
-	PCOM_MSM_HSUSB_PHY_RESET,
-	PCOM_GET_BATT_MV_LEVEL,
-	PCOM_CHG_USB_IS_PC_CONNECTED,
-	PCOM_CHG_USB_IS_CHARGER_CONNECTED,
-	PCOM_CHG_USB_IS_DISCONNECTED,
-	PCOM_CHG_USB_IS_AVAILABLE,
-	PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ,
-	PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY,
-	PCOM_CLKCTL_RPC_RESET_ASSERT,
-	PCOM_CLKCTL_RPC_RESET_DEASSERT,
-	PCOM_CLKCTL_RPC_RAIL_ON,
-	PCOM_CLKCTL_RPC_RAIL_OFF,
-	PCOM_CLKCTL_RPC_RAIL_ENABLE,
-	PCOM_CLKCTL_RPC_RAIL_DISABLE,
-	PCOM_CLKCTL_RPC_RAIL_CONTROL,
-	PCOM_CLKCTL_RPC_MIN_MSMC1,
-	PCOM_NUM_CMDS,
-};
-
-enum {
-	PCOM_INVALID_STATUS = 0x0,
-	PCOM_READY,
-	PCOM_CMD_RUNNING,
-	PCOM_CMD_SUCCESS,
-	PCOM_CMD_FAIL,
-	PCOM_CMD_FAIL_FALSE_RETURNED,
-	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER,
-	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT,
-	PCOM_CMD_FAIL_CMD_UNREGISTERED,
-	PCOM_CMD_FAIL_CMD_LOCKED,
-	PCOM_CMD_FAIL_SERVER_NOT_YET_READY,
-	PCOM_CMD_FAIL_BAD_DESTINATION,
-	PCOM_CMD_FAIL_SERVER_RESET,
-	PCOM_CMD_FAIL_SMSM_NOT_INIT,
-	PCOM_CMD_FAIL_PROC_COMM_BUSY,
-	PCOM_CMD_FAIL_PROC_COMM_NOT_INIT,
-
-};
-
-/* List of VREGs that support the Pull Down Resistor setting. */
-enum vreg_pdown_id {
-	PM_VREG_PDOWN_MSMA_ID,
-	PM_VREG_PDOWN_MSMP_ID,
-	PM_VREG_PDOWN_MSME1_ID,	/* Not supported in Panoramix */
-	PM_VREG_PDOWN_MSMC1_ID,	/* Not supported in PM6620 */
-	PM_VREG_PDOWN_MSMC2_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_GP3_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_MSME2_ID,	/* Supported in PM7500 and Panoramix only */
-	PM_VREG_PDOWN_GP4_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_GP1_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_TCXO_ID,
-	PM_VREG_PDOWN_PA_ID,
-	PM_VREG_PDOWN_RFTX_ID,
-	PM_VREG_PDOWN_RFRX1_ID,
-	PM_VREG_PDOWN_RFRX2_ID,
-	PM_VREG_PDOWN_SYNT_ID,
-	PM_VREG_PDOWN_WLAN_ID,
-	PM_VREG_PDOWN_USB_ID,
-	PM_VREG_PDOWN_MMC_ID,
-	PM_VREG_PDOWN_RUIM_ID,
-	PM_VREG_PDOWN_MSMC0_ID,	/* Supported in PM6610 only */
-	PM_VREG_PDOWN_GP2_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_GP5_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_GP6_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_RF_ID,
-	PM_VREG_PDOWN_RF_VCO_ID,
-	PM_VREG_PDOWN_MPLL_ID,
-	PM_VREG_PDOWN_S2_ID,
-	PM_VREG_PDOWN_S3_ID,
-	PM_VREG_PDOWN_RFUBM_ID,
-
-	/* new for HAN */
-	PM_VREG_PDOWN_RF1_ID,
-	PM_VREG_PDOWN_RF2_ID,
-	PM_VREG_PDOWN_RFA_ID,
-	PM_VREG_PDOWN_CDC2_ID,
-	PM_VREG_PDOWN_RFTX2_ID,
-	PM_VREG_PDOWN_USIM_ID,
-	PM_VREG_PDOWN_USB2P6_ID,
-	PM_VREG_PDOWN_USB3P3_ID,
-	PM_VREG_PDOWN_INVALID_ID,
-
-	/* backward compatible enums only */
-	PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID,
-	PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID,
-	PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID,
-	PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID,
-	PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID,
-	PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID,
-
-	PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID,
-	PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID,
-	PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID,
-	PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID,
-	PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
-};
-
-enum {
-	PCOM_CLKRGM_APPS_RESET_USB_PHY	= 34,
-	PCOM_CLKRGM_APPS_RESET_USBH	= 37,
-};
-
-/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
-
-#define GPIO_ENABLE	0
-#define GPIO_DISABLE	1
-
-#define GPIO_INPUT	0
-#define GPIO_OUTPUT	1
-
-#define GPIO_NO_PULL	0
-#define GPIO_PULL_DOWN	1
-#define GPIO_KEEPER	2
-#define GPIO_PULL_UP	3
-
-#define GPIO_2MA	0
-#define GPIO_4MA	1
-#define GPIO_6MA	2
-#define GPIO_8MA	3
-#define GPIO_10MA	4
-#define GPIO_12MA	5
-#define GPIO_14MA	6
-#define GPIO_16MA	7
-
-#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \
-		((((gpio) & 0x3FF) << 4)	| \
-		((func) & 0xf)			| \
-		(((dir) & 0x1) << 14)		| \
-		(((pull) & 0x3) << 15)		| \
-		(((drvstr) & 0xF) << 17))
-
-int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
-void proc_comm_boot_wait(void);
-
-#endif
diff --git a/arch/arm/mach-msm/sirc.c b/arch/arm/mach-msm/sirc.c
deleted file mode 100644
index 689e78c95f38..000000000000
--- a/arch/arm/mach-msm/sirc.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-
-static unsigned int int_enable;
-static unsigned int wake_enable;
-
-static struct sirc_regs_t sirc_regs = {
-	.int_enable       = SPSS_SIRC_INT_ENABLE,
-	.int_enable_clear = SPSS_SIRC_INT_ENABLE_CLEAR,
-	.int_enable_set   = SPSS_SIRC_INT_ENABLE_SET,
-	.int_type         = SPSS_SIRC_INT_TYPE,
-	.int_polarity     = SPSS_SIRC_INT_POLARITY,
-	.int_clear        = SPSS_SIRC_INT_CLEAR,
-};
-
-static struct sirc_cascade_regs sirc_reg_table[] = {
-	{
-		.int_status  = SPSS_SIRC_IRQ_STATUS,
-		.cascade_irq = INT_SIRC_0,
-	}
-};
-
-/* Mask off the given interrupt. Keep the int_enable mask in sync with
-   the enable reg, so it can be restored after power collapse. */
-static void sirc_irq_mask(struct irq_data *d)
-{
-	unsigned int mask;
-
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	writel(mask, sirc_regs.int_enable_clear);
-	int_enable &= ~mask;
-	return;
-}
-
-/* Unmask the given interrupt. Keep the int_enable mask in sync with
-   the enable reg, so it can be restored after power collapse. */
-static void sirc_irq_unmask(struct irq_data *d)
-{
-	unsigned int mask;
-
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	writel(mask, sirc_regs.int_enable_set);
-	int_enable |= mask;
-	return;
-}
-
-static void sirc_irq_ack(struct irq_data *d)
-{
-	unsigned int mask;
-
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	writel(mask, sirc_regs.int_clear);
-	return;
-}
-
-static int sirc_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned int mask;
-
-	/* Used to set the interrupt enable mask during power collapse. */
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	if (on)
-		wake_enable |= mask;
-	else
-		wake_enable &= ~mask;
-
-	return 0;
-}
-
-static int sirc_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	unsigned int mask;
-	unsigned int val;
-
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	val = readl(sirc_regs.int_polarity);
-
-	if (flow_type & (IRQF_TRIGGER_LOW | IRQF_TRIGGER_FALLING))
-		val |= mask;
-	else
-		val &= ~mask;
-
-	writel(val, sirc_regs.int_polarity);
-
-	val = readl(sirc_regs.int_type);
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
-		val |= mask;
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-	} else {
-		val &= ~mask;
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-	}
-
-	writel(val, sirc_regs.int_type);
-
-	return 0;
-}
-
-/* Finds the pending interrupt on the passed cascade irq and redrives it */
-static void sirc_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int reg = 0;
-	unsigned int sirq;
-	unsigned int status;
-
-	while ((reg < ARRAY_SIZE(sirc_reg_table)) &&
-		(sirc_reg_table[reg].cascade_irq != irq))
-		reg++;
-
-	status = readl(sirc_reg_table[reg].int_status);
-	status &= SIRC_MASK;
-	if (status == 0)
-		return;
-
-	for (sirq = 0;
-	     (sirq < NR_SIRC_IRQS) && ((status & (1U << sirq)) == 0);
-	     sirq++)
-		;
-	generic_handle_irq(sirq+FIRST_SIRC_IRQ);
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static struct irq_chip sirc_irq_chip = {
-	.name          = "sirc",
-	.irq_ack       = sirc_irq_ack,
-	.irq_mask      = sirc_irq_mask,
-	.irq_unmask    = sirc_irq_unmask,
-	.irq_set_wake  = sirc_irq_set_wake,
-	.irq_set_type  = sirc_irq_set_type,
-};
-
-void __init msm_init_sirc(void)
-{
-	int i;
-
-	int_enable = 0;
-	wake_enable = 0;
-
-	for (i = FIRST_SIRC_IRQ; i < LAST_SIRC_IRQ; i++) {
-		irq_set_chip_and_handler(i, &sirc_irq_chip, handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	for (i = 0; i < ARRAY_SIZE(sirc_reg_table); i++) {
-		irq_set_chained_handler(sirc_reg_table[i].cascade_irq,
-					sirc_irq_handler);
-		irq_set_irq_wake(sirc_reg_table[i].cascade_irq, 1);
-	}
-	return;
-}
-
diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c
deleted file mode 100644
index 7550f5a08956..000000000000
--- a/arch/arm/mach-msm/smd.c
+++ /dev/null
@@ -1,1034 +0,0 @@
-/* arch/arm/mach-msm/smd.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-
-#include <mach/msm_smd.h>
-
-#include "smd_private.h"
-#include "proc_comm.h"
-
-#if defined(CONFIG_ARCH_QSD8X50)
-#define CONFIG_QDSP6 1
-#endif
-
-#define MODULE_NAME "msm_smd"
-
-enum {
-	MSM_SMD_DEBUG = 1U << 0,
-	MSM_SMSM_DEBUG = 1U << 0,
-};
-
-static int msm_smd_debug_mask;
-
-struct shared_info {
-	int ready;
-	void __iomem *state;
-};
-
-static unsigned dummy_state[SMSM_STATE_COUNT];
-
-static struct shared_info smd_info = {
-	/* FIXME: not a real __iomem pointer */
-	.state = &dummy_state,
-};
-
-module_param_named(debug_mask, msm_smd_debug_mask,
-		   int, S_IRUGO | S_IWUSR | S_IWGRP);
-
-static unsigned last_heap_free = 0xffffffff;
-
-static inline void notify_other_smsm(void)
-{
-	msm_a2m_int(5);
-#ifdef CONFIG_QDSP6
-	msm_a2m_int(8);
-#endif
-}
-
-static inline void notify_modem_smd(void)
-{
-	msm_a2m_int(0);
-}
-
-static inline void notify_dsp_smd(void)
-{
-	msm_a2m_int(8);
-}
-
-static void smd_diag(void)
-{
-	char *x;
-
-	x = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
-	if (x != 0) {
-		x[SZ_DIAG_ERR_MSG - 1] = 0;
-		pr_debug("DIAG '%s'\n", x);
-	}
-}
-
-/* call when SMSM_RESET flag is set in the A9's smsm_state */
-static void handle_modem_crash(void)
-{
-	pr_err("ARM9 has CRASHED\n");
-	smd_diag();
-
-	/* in this case the modem or watchdog should reboot us */
-	for (;;)
-		;
-}
-
-uint32_t raw_smsm_get_state(enum smsm_state_item item)
-{
-	return readl(smd_info.state + item * 4);
-}
-
-static int check_for_modem_crash(void)
-{
-	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) {
-		handle_modem_crash();
-		return -1;
-	}
-	return 0;
-}
-
-/* the spinlock is used to synchronize between the
- * irq handler and code that mutates the channel
- * list or fiddles with channel state
- */
-DEFINE_SPINLOCK(smd_lock);
-DEFINE_SPINLOCK(smem_lock);
-
-/* the mutex is used during open() and close()
- * operations to avoid races while creating or
- * destroying smd_channel structures
- */
-static DEFINE_MUTEX(smd_creation_mutex);
-
-static int smd_initialized;
-
-LIST_HEAD(smd_ch_closed_list);
-LIST_HEAD(smd_ch_list_modem);
-LIST_HEAD(smd_ch_list_dsp);
-
-static unsigned char smd_ch_allocated[64];
-static struct work_struct probe_work;
-
-/* how many bytes are available for reading */
-static int smd_stream_read_avail(struct smd_channel *ch)
-{
-	return (ch->recv->head - ch->recv->tail) & ch->fifo_mask;
-}
-
-/* how many bytes we are free to write */
-static int smd_stream_write_avail(struct smd_channel *ch)
-{
-	return ch->fifo_mask -
-		((ch->send->head - ch->send->tail) & ch->fifo_mask);
-}
-
-static int smd_packet_read_avail(struct smd_channel *ch)
-{
-	if (ch->current_packet) {
-		int n = smd_stream_read_avail(ch);
-		if (n > ch->current_packet)
-			n = ch->current_packet;
-		return n;
-	} else {
-		return 0;
-	}
-}
-
-static int smd_packet_write_avail(struct smd_channel *ch)
-{
-	int n = smd_stream_write_avail(ch);
-	return n > SMD_HEADER_SIZE ? n - SMD_HEADER_SIZE : 0;
-}
-
-static int ch_is_open(struct smd_channel *ch)
-{
-	return (ch->recv->state == SMD_SS_OPENED) &&
-		(ch->send->state == SMD_SS_OPENED);
-}
-
-/* provide a pointer and length to readable data in the fifo */
-static unsigned ch_read_buffer(struct smd_channel *ch, void **ptr)
-{
-	unsigned head = ch->recv->head;
-	unsigned tail = ch->recv->tail;
-	*ptr = (void *) (ch->recv_data + tail);
-
-	if (tail <= head)
-		return head - tail;
-	else
-		return ch->fifo_size - tail;
-}
-
-/* advance the fifo read pointer after data from ch_read_buffer is consumed */
-static void ch_read_done(struct smd_channel *ch, unsigned count)
-{
-	BUG_ON(count > smd_stream_read_avail(ch));
-	ch->recv->tail = (ch->recv->tail + count) & ch->fifo_mask;
-	ch->send->fTAIL = 1;
-}
-
-/* basic read interface to ch_read_{buffer,done} used
- * by smd_*_read() and update_packet_state()
- * will read-and-discard if the _data pointer is null
- */
-static int ch_read(struct smd_channel *ch, void *_data, int len)
-{
-	void *ptr;
-	unsigned n;
-	unsigned char *data = _data;
-	int orig_len = len;
-
-	while (len > 0) {
-		n = ch_read_buffer(ch, &ptr);
-		if (n == 0)
-			break;
-
-		if (n > len)
-			n = len;
-		if (_data)
-			memcpy(data, ptr, n);
-
-		data += n;
-		len -= n;
-		ch_read_done(ch, n);
-	}
-
-	return orig_len - len;
-}
-
-static void update_stream_state(struct smd_channel *ch)
-{
-	/* streams have no special state requiring updating */
-}
-
-static void update_packet_state(struct smd_channel *ch)
-{
-	unsigned hdr[5];
-	int r;
-
-	/* can't do anything if we're in the middle of a packet */
-	if (ch->current_packet != 0)
-		return;
-
-	/* don't bother unless we can get the full header */
-	if (smd_stream_read_avail(ch) < SMD_HEADER_SIZE)
-		return;
-
-	r = ch_read(ch, hdr, SMD_HEADER_SIZE);
-	BUG_ON(r != SMD_HEADER_SIZE);
-
-	ch->current_packet = hdr[0];
-}
-
-/* provide a pointer and length to next free space in the fifo */
-static unsigned ch_write_buffer(struct smd_channel *ch, void **ptr)
-{
-	unsigned head = ch->send->head;
-	unsigned tail = ch->send->tail;
-	*ptr = (void *) (ch->send_data + head);
-
-	if (head < tail) {
-		return tail - head - 1;
-	} else {
-		if (tail == 0)
-			return ch->fifo_size - head - 1;
-		else
-			return ch->fifo_size - head;
-	}
-}
-
-/* advace the fifo write pointer after freespace
- * from ch_write_buffer is filled
- */
-static void ch_write_done(struct smd_channel *ch, unsigned count)
-{
-	BUG_ON(count > smd_stream_write_avail(ch));
-	ch->send->head = (ch->send->head + count) & ch->fifo_mask;
-	ch->send->fHEAD = 1;
-}
-
-static void ch_set_state(struct smd_channel *ch, unsigned n)
-{
-	if (n == SMD_SS_OPENED) {
-		ch->send->fDSR = 1;
-		ch->send->fCTS = 1;
-		ch->send->fCD = 1;
-	} else {
-		ch->send->fDSR = 0;
-		ch->send->fCTS = 0;
-		ch->send->fCD = 0;
-	}
-	ch->send->state = n;
-	ch->send->fSTATE = 1;
-	ch->notify_other_cpu();
-}
-
-static void do_smd_probe(void)
-{
-	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
-	if (shared->heap_info.free_offset != last_heap_free) {
-		last_heap_free = shared->heap_info.free_offset;
-		schedule_work(&probe_work);
-	}
-}
-
-static void smd_state_change(struct smd_channel *ch,
-			     unsigned last, unsigned next)
-{
-	ch->last_state = next;
-
-	pr_debug("ch %d %d -> %d\n", ch->n, last, next);
-
-	switch (next) {
-	case SMD_SS_OPENING:
-		ch->recv->tail = 0;
-	case SMD_SS_OPENED:
-		if (ch->send->state != SMD_SS_OPENED)
-			ch_set_state(ch, SMD_SS_OPENED);
-		ch->notify(ch->priv, SMD_EVENT_OPEN);
-		break;
-	case SMD_SS_FLUSHING:
-	case SMD_SS_RESET:
-		/* we should force them to close? */
-	default:
-		ch->notify(ch->priv, SMD_EVENT_CLOSE);
-	}
-}
-
-static void handle_smd_irq(struct list_head *list, void (*notify)(void))
-{
-	unsigned long flags;
-	struct smd_channel *ch;
-	int do_notify = 0;
-	unsigned ch_flags;
-	unsigned tmp;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	list_for_each_entry(ch, list, ch_list) {
-		ch_flags = 0;
-		if (ch_is_open(ch)) {
-			if (ch->recv->fHEAD) {
-				ch->recv->fHEAD = 0;
-				ch_flags |= 1;
-				do_notify |= 1;
-			}
-			if (ch->recv->fTAIL) {
-				ch->recv->fTAIL = 0;
-				ch_flags |= 2;
-				do_notify |= 1;
-			}
-			if (ch->recv->fSTATE) {
-				ch->recv->fSTATE = 0;
-				ch_flags |= 4;
-				do_notify |= 1;
-			}
-		}
-		tmp = ch->recv->state;
-		if (tmp != ch->last_state)
-			smd_state_change(ch, ch->last_state, tmp);
-		if (ch_flags) {
-			ch->update_state(ch);
-			ch->notify(ch->priv, SMD_EVENT_DATA);
-		}
-	}
-	if (do_notify)
-		notify();
-	spin_unlock_irqrestore(&smd_lock, flags);
-	do_smd_probe();
-}
-
-static irqreturn_t smd_modem_irq_handler(int irq, void *data)
-{
-	handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
-	return IRQ_HANDLED;
-}
-
-#if defined(CONFIG_QDSP6)
-static irqreturn_t smd_dsp_irq_handler(int irq, void *data)
-{
-	handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
-	return IRQ_HANDLED;
-}
-#endif
-
-static void smd_fake_irq_handler(unsigned long arg)
-{
-	handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
-	handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
-}
-
-static DECLARE_TASKLET(smd_fake_irq_tasklet, smd_fake_irq_handler, 0);
-
-static inline int smd_need_int(struct smd_channel *ch)
-{
-	if (ch_is_open(ch)) {
-		if (ch->recv->fHEAD || ch->recv->fTAIL || ch->recv->fSTATE)
-			return 1;
-		if (ch->recv->state != ch->last_state)
-			return 1;
-	}
-	return 0;
-}
-
-void smd_sleep_exit(void)
-{
-	unsigned long flags;
-	struct smd_channel *ch;
-	int need_int = 0;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	list_for_each_entry(ch, &smd_ch_list_modem, ch_list) {
-		if (smd_need_int(ch)) {
-			need_int = 1;
-			break;
-		}
-	}
-	list_for_each_entry(ch, &smd_ch_list_dsp, ch_list) {
-		if (smd_need_int(ch)) {
-			need_int = 1;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&smd_lock, flags);
-	do_smd_probe();
-
-	if (need_int) {
-		if (msm_smd_debug_mask & MSM_SMD_DEBUG)
-			pr_info("smd_sleep_exit need interrupt\n");
-		tasklet_schedule(&smd_fake_irq_tasklet);
-	}
-}
-
-
-void smd_kick(smd_channel_t *ch)
-{
-	unsigned long flags;
-	unsigned tmp;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	ch->update_state(ch);
-	tmp = ch->recv->state;
-	if (tmp != ch->last_state) {
-		ch->last_state = tmp;
-		if (tmp == SMD_SS_OPENED)
-			ch->notify(ch->priv, SMD_EVENT_OPEN);
-		else
-			ch->notify(ch->priv, SMD_EVENT_CLOSE);
-	}
-	ch->notify(ch->priv, SMD_EVENT_DATA);
-	ch->notify_other_cpu();
-	spin_unlock_irqrestore(&smd_lock, flags);
-}
-
-static int smd_is_packet(int chn, unsigned type)
-{
-	type &= SMD_KIND_MASK;
-	if (type == SMD_KIND_PACKET)
-		return 1;
-	if (type == SMD_KIND_STREAM)
-		return 0;
-
-	/* older AMSS reports SMD_KIND_UNKNOWN always */
-	if ((chn > 4) || (chn == 1))
-		return 1;
-	else
-		return 0;
-}
-
-static int smd_stream_write(smd_channel_t *ch, const void *_data, int len)
-{
-	void *ptr;
-	const unsigned char *buf = _data;
-	unsigned xfer;
-	int orig_len = len;
-
-	if (len < 0)
-		return -EINVAL;
-
-	while ((xfer = ch_write_buffer(ch, &ptr)) != 0) {
-		if (!ch_is_open(ch))
-			break;
-		if (xfer > len)
-			xfer = len;
-		memcpy(ptr, buf, xfer);
-		ch_write_done(ch, xfer);
-		len -= xfer;
-		buf += xfer;
-		if (len == 0)
-			break;
-	}
-
-	ch->notify_other_cpu();
-
-	return orig_len - len;
-}
-
-static int smd_packet_write(smd_channel_t *ch, const void *_data, int len)
-{
-	unsigned hdr[5];
-
-	if (len < 0)
-		return -EINVAL;
-
-	if (smd_stream_write_avail(ch) < (len + SMD_HEADER_SIZE))
-		return -ENOMEM;
-
-	hdr[0] = len;
-	hdr[1] = hdr[2] = hdr[3] = hdr[4] = 0;
-
-	smd_stream_write(ch, hdr, sizeof(hdr));
-	smd_stream_write(ch, _data, len);
-
-	return len;
-}
-
-static int smd_stream_read(smd_channel_t *ch, void *data, int len)
-{
-	int r;
-
-	if (len < 0)
-		return -EINVAL;
-
-	r = ch_read(ch, data, len);
-	if (r > 0)
-		ch->notify_other_cpu();
-
-	return r;
-}
-
-static int smd_packet_read(smd_channel_t *ch, void *data, int len)
-{
-	unsigned long flags;
-	int r;
-
-	if (len < 0)
-		return -EINVAL;
-
-	if (len > ch->current_packet)
-		len = ch->current_packet;
-
-	r = ch_read(ch, data, len);
-	if (r > 0)
-		ch->notify_other_cpu();
-
-	spin_lock_irqsave(&smd_lock, flags);
-	ch->current_packet -= r;
-	update_packet_state(ch);
-	spin_unlock_irqrestore(&smd_lock, flags);
-
-	return r;
-}
-
-static int smd_alloc_channel(const char *name, uint32_t cid, uint32_t type)
-{
-	struct smd_channel *ch;
-
-	ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL);
-	if (ch == 0) {
-		pr_err("smd_alloc_channel() out of memory\n");
-		return -1;
-	}
-	ch->n = cid;
-
-	if (_smd_alloc_channel(ch)) {
-		kfree(ch);
-		return -1;
-	}
-
-	ch->fifo_mask = ch->fifo_size - 1;
-	ch->type = type;
-
-	if ((type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
-		ch->notify_other_cpu = notify_modem_smd;
-	else
-		ch->notify_other_cpu = notify_dsp_smd;
-
-	if (smd_is_packet(cid, type)) {
-		ch->read = smd_packet_read;
-		ch->write = smd_packet_write;
-		ch->read_avail = smd_packet_read_avail;
-		ch->write_avail = smd_packet_write_avail;
-		ch->update_state = update_packet_state;
-	} else {
-		ch->read = smd_stream_read;
-		ch->write = smd_stream_write;
-		ch->read_avail = smd_stream_read_avail;
-		ch->write_avail = smd_stream_write_avail;
-		ch->update_state = update_stream_state;
-	}
-
-	if ((type & 0xff) == 0)
-		memcpy(ch->name, "SMD_", 4);
-	else
-		memcpy(ch->name, "DSP_", 4);
-	memcpy(ch->name + 4, name, 20);
-	ch->name[23] = 0;
-	ch->pdev.name = ch->name;
-	ch->pdev.id = -1;
-
-	pr_debug("smd_alloc_channel() cid=%02d size=%05d '%s'\n",
-		ch->n, ch->fifo_size, ch->name);
-
-	mutex_lock(&smd_creation_mutex);
-	list_add(&ch->ch_list, &smd_ch_closed_list);
-	mutex_unlock(&smd_creation_mutex);
-
-	platform_device_register(&ch->pdev);
-	return 0;
-}
-
-static void smd_channel_probe_worker(struct work_struct *work)
-{
-	struct smd_alloc_elm *shared;
-	unsigned ctype;
-	unsigned type;
-	unsigned n;
-
-	shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
-	if (!shared) {
-		pr_err("cannot find allocation table\n");
-		return;
-	}
-	for (n = 0; n < 64; n++) {
-		if (smd_ch_allocated[n])
-			continue;
-		if (!shared[n].ref_count)
-			continue;
-		if (!shared[n].name[0])
-			continue;
-		ctype = shared[n].ctype;
-		type = ctype & SMD_TYPE_MASK;
-
-		/* DAL channels are stream but neither the modem,
-		 * nor the DSP correctly indicate this.  Fixup manually.
-		 */
-		if (!memcmp(shared[n].name, "DAL", 3))
-			ctype = (ctype & (~SMD_KIND_MASK)) | SMD_KIND_STREAM;
-
-		type = shared[n].ctype & SMD_TYPE_MASK;
-		if ((type == SMD_TYPE_APPS_MODEM) ||
-		    (type == SMD_TYPE_APPS_DSP))
-			if (!smd_alloc_channel(shared[n].name, shared[n].cid, ctype))
-				smd_ch_allocated[n] = 1;
-	}
-}
-
-static void do_nothing_notify(void *priv, unsigned flags)
-{
-}
-
-struct smd_channel *smd_get_channel(const char *name)
-{
-	struct smd_channel *ch;
-
-	mutex_lock(&smd_creation_mutex);
-	list_for_each_entry(ch, &smd_ch_closed_list, ch_list) {
-		if (!strcmp(name, ch->name)) {
-			list_del(&ch->ch_list);
-			mutex_unlock(&smd_creation_mutex);
-			return ch;
-		}
-	}
-	mutex_unlock(&smd_creation_mutex);
-
-	return NULL;
-}
-
-int smd_open(const char *name, smd_channel_t **_ch,
-	     void *priv, void (*notify)(void *, unsigned))
-{
-	struct smd_channel *ch;
-	unsigned long flags;
-
-	if (smd_initialized == 0) {
-		pr_info("smd_open() before smd_init()\n");
-		return -ENODEV;
-	}
-
-	ch = smd_get_channel(name);
-	if (!ch)
-		return -ENODEV;
-
-	if (notify == 0)
-		notify = do_nothing_notify;
-
-	ch->notify = notify;
-	ch->current_packet = 0;
-	ch->last_state = SMD_SS_CLOSED;
-	ch->priv = priv;
-
-	*_ch = ch;
-
-	spin_lock_irqsave(&smd_lock, flags);
-
-	if ((ch->type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
-		list_add(&ch->ch_list, &smd_ch_list_modem);
-	else
-		list_add(&ch->ch_list, &smd_ch_list_dsp);
-
-	/* If the remote side is CLOSING, we need to get it to
-	 * move to OPENING (which we'll do by moving from CLOSED to
-	 * OPENING) and then get it to move from OPENING to
-	 * OPENED (by doing the same state change ourselves).
-	 *
-	 * Otherwise, it should be OPENING and we can move directly
-	 * to OPENED so that it will follow.
-	 */
-	if (ch->recv->state == SMD_SS_CLOSING) {
-		ch->send->head = 0;
-		ch_set_state(ch, SMD_SS_OPENING);
-	} else {
-		ch_set_state(ch, SMD_SS_OPENED);
-	}
-	spin_unlock_irqrestore(&smd_lock, flags);
-	smd_kick(ch);
-
-	return 0;
-}
-
-int smd_close(smd_channel_t *ch)
-{
-	unsigned long flags;
-
-	if (ch == 0)
-		return -1;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	ch->notify = do_nothing_notify;
-	list_del(&ch->ch_list);
-	ch_set_state(ch, SMD_SS_CLOSED);
-	spin_unlock_irqrestore(&smd_lock, flags);
-
-	mutex_lock(&smd_creation_mutex);
-	list_add(&ch->ch_list, &smd_ch_closed_list);
-	mutex_unlock(&smd_creation_mutex);
-
-	return 0;
-}
-
-int smd_read(smd_channel_t *ch, void *data, int len)
-{
-	return ch->read(ch, data, len);
-}
-
-int smd_write(smd_channel_t *ch, const void *data, int len)
-{
-	return ch->write(ch, data, len);
-}
-
-int smd_write_atomic(smd_channel_t *ch, const void *data, int len)
-{
-	unsigned long flags;
-	int res;
-	spin_lock_irqsave(&smd_lock, flags);
-	res = ch->write(ch, data, len);
-	spin_unlock_irqrestore(&smd_lock, flags);
-	return res;
-}
-
-int smd_read_avail(smd_channel_t *ch)
-{
-	return ch->read_avail(ch);
-}
-
-int smd_write_avail(smd_channel_t *ch)
-{
-	return ch->write_avail(ch);
-}
-
-int smd_wait_until_readable(smd_channel_t *ch, int bytes)
-{
-	return -1;
-}
-
-int smd_wait_until_writable(smd_channel_t *ch, int bytes)
-{
-	return -1;
-}
-
-int smd_cur_packet_size(smd_channel_t *ch)
-{
-	return ch->current_packet;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-void *smem_alloc(unsigned id, unsigned size)
-{
-	return smem_find(id, size);
-}
-
-void __iomem *smem_item(unsigned id, unsigned *size)
-{
-	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
-	struct smem_heap_entry *toc = shared->heap_toc;
-
-	if (id >= SMEM_NUM_ITEMS)
-		return NULL;
-
-	if (toc[id].allocated) {
-		*size = toc[id].size;
-		return (MSM_SHARED_RAM_BASE + toc[id].offset);
-	} else {
-		*size = 0;
-	}
-
-	return NULL;
-}
-
-void *smem_find(unsigned id, unsigned size_in)
-{
-	unsigned size;
-	void *ptr;
-
-	ptr = smem_item(id, &size);
-	if (!ptr)
-		return 0;
-
-	size_in = ALIGN(size_in, 8);
-	if (size_in != size) {
-		pr_err("smem_find(%d, %d): wrong size %d\n",
-		       id, size_in, size);
-		return 0;
-	}
-
-	return ptr;
-}
-
-static irqreturn_t smsm_irq_handler(int irq, void *data)
-{
-	unsigned long flags;
-	unsigned apps, modm;
-
-	spin_lock_irqsave(&smem_lock, flags);
-
-	apps = raw_smsm_get_state(SMSM_STATE_APPS);
-	modm = raw_smsm_get_state(SMSM_STATE_MODEM);
-
-	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
-		pr_info("<SM %08x %08x>\n", apps, modm);
-	if (modm & SMSM_RESET)
-		handle_modem_crash();
-
-	do_smd_probe();
-
-	spin_unlock_irqrestore(&smem_lock, flags);
-	return IRQ_HANDLED;
-}
-
-int smsm_change_state(enum smsm_state_item item,
-		      uint32_t clear_mask, uint32_t set_mask)
-{
-	void __iomem *addr = smd_info.state + item * 4;
-	unsigned long flags;
-	unsigned state;
-
-	if (!smd_info.ready)
-		return -EIO;
-
-	spin_lock_irqsave(&smem_lock, flags);
-
-	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
-		handle_modem_crash();
-
-	state = (readl(addr) & ~clear_mask) | set_mask;
-	writel(state, addr);
-
-	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
-		pr_info("smsm_change_state %d %x\n", item, state);
-	notify_other_smsm();
-
-	spin_unlock_irqrestore(&smem_lock, flags);
-
-	return 0;
-}
-
-uint32_t smsm_get_state(enum smsm_state_item item)
-{
-	unsigned long flags;
-	uint32_t rv;
-
-	spin_lock_irqsave(&smem_lock, flags);
-
-	rv = readl(smd_info.state + item * 4);
-
-	if (item == SMSM_STATE_MODEM && (rv & SMSM_RESET))
-		handle_modem_crash();
-
-	spin_unlock_irqrestore(&smem_lock, flags);
-
-	return rv;
-}
-
-#ifdef CONFIG_ARCH_MSM_SCORPION
-
-int smsm_set_sleep_duration(uint32_t delay)
-{
-	struct msm_dem_slave_data *ptr;
-
-	ptr = smem_find(SMEM_APPS_DEM_SLAVE_DATA, sizeof(*ptr));
-	if (ptr == NULL) {
-		pr_err("smsm_set_sleep_duration <SM NO APPS_DEM_SLAVE_DATA>\n");
-		return -EIO;
-	}
-	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
-		pr_info("smsm_set_sleep_duration %d -> %d\n",
-		       ptr->sleep_time, delay);
-	ptr->sleep_time = delay;
-	return 0;
-}
-
-#else
-
-int smsm_set_sleep_duration(uint32_t delay)
-{
-	uint32_t *ptr;
-
-	ptr = smem_find(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
-	if (ptr == NULL) {
-		pr_err("smsm_set_sleep_duration <SM NO SLEEP_DELAY>\n");
-		return -EIO;
-	}
-	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
-		pr_info("smsm_set_sleep_duration %d -> %d\n",
-		       *ptr, delay);
-	*ptr = delay;
-	return 0;
-}
-
-#endif
-
-int smd_core_init(void)
-{
-	int r;
-
-	/* wait for essential items to be initialized */
-	for (;;) {
-		unsigned size;
-		void __iomem *state;
-		state = smem_item(SMEM_SMSM_SHARED_STATE, &size);
-		if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) {
-			smd_info.state = state;
-			break;
-		}
-	}
-
-	smd_info.ready = 1;
-
-	r = request_irq(INT_A9_M2A_0, smd_modem_irq_handler,
-			IRQF_TRIGGER_RISING, "smd_dev", 0);
-	if (r < 0)
-		return r;
-	r = enable_irq_wake(INT_A9_M2A_0);
-	if (r < 0)
-		pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_0\n");
-
-	r = request_irq(INT_A9_M2A_5, smsm_irq_handler,
-			IRQF_TRIGGER_RISING, "smsm_dev", 0);
-	if (r < 0) {
-		free_irq(INT_A9_M2A_0, 0);
-		return r;
-	}
-	r = enable_irq_wake(INT_A9_M2A_5);
-	if (r < 0)
-		pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_5\n");
-
-#if defined(CONFIG_QDSP6)
-	r = request_irq(INT_ADSP_A11, smd_dsp_irq_handler,
-			IRQF_TRIGGER_RISING, "smd_dsp", 0);
-	if (r < 0) {
-		free_irq(INT_A9_M2A_0, 0);
-		free_irq(INT_A9_M2A_5, 0);
-		return r;
-	}
-#endif
-
-	/* check for any SMD channels that may already exist */
-	do_smd_probe();
-
-	/* indicate that we're up and running */
-	smsm_change_state(SMSM_STATE_APPS,
-			  ~0, SMSM_INIT | SMSM_SMDINIT | SMSM_RPCINIT | SMSM_RUN);
-#ifdef CONFIG_ARCH_MSM_SCORPION
-	smsm_change_state(SMSM_STATE_APPS_DEM, ~0, 0);
-#endif
-
-	return 0;
-}
-
-static int msm_smd_probe(struct platform_device *pdev)
-{
-	/*
-	 * If we haven't waited for the ARM9 to boot up till now,
-	 * then we need to wait here. Otherwise this should just
-	 * return immediately.
-	 */
-	proc_comm_boot_wait();
-
-	INIT_WORK(&probe_work, smd_channel_probe_worker);
-
-	if (smd_core_init()) {
-		pr_err("smd_core_init() failed\n");
-		return -1;
-	}
-
-	do_smd_probe();
-
-	msm_check_for_modem_crash = check_for_modem_crash;
-
-	msm_init_last_radio_log(THIS_MODULE);
-
-	smd_initialized = 1;
-
-	return 0;
-}
-
-static struct platform_driver msm_smd_driver = {
-	.probe = msm_smd_probe,
-	.driver = {
-		.name = MODULE_NAME,
-	},
-};
-
-static int __init msm_smd_init(void)
-{
-	return platform_driver_register(&msm_smd_driver);
-}
-
-module_init(msm_smd_init);
-
-MODULE_DESCRIPTION("MSM Shared Memory Core");
-MODULE_AUTHOR("Brian Swetland <swetland@google.com>");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
deleted file mode 100644
index 8056b3e5590f..000000000000
--- a/arch/arm/mach-msm/smd_debug.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/* arch/arm/mach-msm/smd_debug.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/debugfs.h>
-#include <linux/list.h>
-
-#include <mach/msm_iomap.h>
-
-#include "smd_private.h"
-
-#if defined(CONFIG_DEBUG_FS)
-
-static char *chstate(unsigned n)
-{
-	switch (n) {
-	case SMD_SS_CLOSED:
-		return "CLOSED";
-	case SMD_SS_OPENING:
-		return "OPENING";
-	case SMD_SS_OPENED:
-		return "OPENED";
-	case SMD_SS_FLUSHING:
-		return "FLUSHING";
-	case SMD_SS_CLOSING:
-		return "CLOSING";
-	case SMD_SS_RESET:
-		return "RESET";
-	case SMD_SS_RESET_OPENING:
-		return "ROPENING";
-	default:
-		return "UNKNOWN";
-	}
-}
-
-
-static int dump_ch(char *buf, int max, struct smd_channel *ch)
-{
-	volatile struct smd_half_channel *s = ch->send;
-	volatile struct smd_half_channel *r = ch->recv;
-
-	return scnprintf(
-		buf, max,
-		"ch%02d:"
-		" %8s(%05d/%05d) %c%c%c%c%c%c%c <->"
-		" %8s(%05d/%05d) %c%c%c%c%c%c%c '%s'\n", ch->n,
-		chstate(s->state), s->tail, s->head,
-		s->fDSR ? 'D' : 'd',
-		s->fCTS ? 'C' : 'c',
-		s->fCD ? 'C' : 'c',
-		s->fRI ? 'I' : 'i',
-		s->fHEAD ? 'W' : 'w',
-		s->fTAIL ? 'R' : 'r',
-		s->fSTATE ? 'S' : 's',
-		chstate(r->state), r->tail, r->head,
-		r->fDSR ? 'D' : 'd',
-		r->fCTS ? 'R' : 'r',
-		r->fCD ? 'C' : 'c',
-		r->fRI ? 'I' : 'i',
-		r->fHEAD ? 'W' : 'w',
-		r->fTAIL ? 'R' : 'r',
-		r->fSTATE ? 'S' : 's',
-		ch->name
-		);
-}
-
-static int debug_read_stat(char *buf, int max)
-{
-	char *msg;
-	int i = 0;
-
-	msg = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
-
-	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
-		i += scnprintf(buf + i, max - i,
-			       "smsm: ARM9 HAS CRASHED\n");
-
-	i += scnprintf(buf + i, max - i, "smsm: a9: %08x a11: %08x\n",
-		       raw_smsm_get_state(SMSM_STATE_MODEM),
-		       raw_smsm_get_state(SMSM_STATE_APPS));
-#ifdef CONFIG_ARCH_MSM_SCORPION
-	i += scnprintf(buf + i, max - i, "smsm dem: apps: %08x modem: %08x "
-		       "qdsp6: %08x power: %08x time: %08x\n",
-		       raw_smsm_get_state(SMSM_STATE_APPS_DEM),
-		       raw_smsm_get_state(SMSM_STATE_MODEM_DEM),
-		       raw_smsm_get_state(SMSM_STATE_QDSP6_DEM),
-		       raw_smsm_get_state(SMSM_STATE_POWER_MASTER_DEM),
-		       raw_smsm_get_state(SMSM_STATE_TIME_MASTER_DEM));
-#endif
-	if (msg) {
-		msg[SZ_DIAG_ERR_MSG - 1] = 0;
-		i += scnprintf(buf + i, max - i, "diag: '%s'\n", msg);
-	}
-	return i;
-}
-
-static int debug_read_mem(char *buf, int max)
-{
-	unsigned n;
-	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
-	struct smem_heap_entry *toc = shared->heap_toc;
-	int i = 0;
-
-	i += scnprintf(buf + i, max - i,
-		       "heap: init=%d free=%d remain=%d\n",
-		       shared->heap_info.initialized,
-		       shared->heap_info.free_offset,
-		       shared->heap_info.heap_remaining);
-
-	for (n = 0; n < SMEM_NUM_ITEMS; n++) {
-		if (toc[n].allocated == 0)
-			continue;
-		i += scnprintf(buf + i, max - i,
-			       "%04d: offset %08x size %08x\n",
-			       n, toc[n].offset, toc[n].size);
-	}
-	return i;
-}
-
-static int debug_read_ch(char *buf, int max)
-{
-	struct smd_channel *ch;
-	unsigned long flags;
-	int i = 0;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	list_for_each_entry(ch, &smd_ch_list_dsp, ch_list)
-		i += dump_ch(buf + i, max - i, ch);
-	list_for_each_entry(ch, &smd_ch_list_modem, ch_list)
-		i += dump_ch(buf + i, max - i, ch);
-	list_for_each_entry(ch, &smd_ch_closed_list, ch_list)
-		i += dump_ch(buf + i, max - i, ch);
-	spin_unlock_irqrestore(&smd_lock, flags);
-
-	return i;
-}
-
-static int debug_read_version(char *buf, int max)
-{
-	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
-	unsigned version = shared->version[VERSION_MODEM];
-	return sprintf(buf, "%d.%d\n", version >> 16, version & 0xffff);
-}
-
-static int debug_read_build_id(char *buf, int max)
-{
-	unsigned size;
-	void *data;
-
-	data = smem_item(SMEM_HW_SW_BUILD_ID, &size);
-	if (!data)
-		return 0;
-
-	if (size >= max)
-		size = max;
-	memcpy(buf, data, size);
-
-	return size;
-}
-
-static int debug_read_alloc_tbl(char *buf, int max)
-{
-	struct smd_alloc_elm *shared;
-	int n, i = 0;
-
-	shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
-
-	for (n = 0; n < 64; n++) {
-		if (shared[n].ref_count == 0)
-			continue;
-		i += scnprintf(buf + i, max - i,
-			       "%03d: %-20s cid=%02d type=%03d "
-			       "kind=%02d ref_count=%d\n",
-			       n, shared[n].name, shared[n].cid,
-			       shared[n].ctype & 0xff,
-			       (shared[n].ctype >> 8) & 0xf,
-			       shared[n].ref_count);
-	}
-
-	return i;
-}
-
-#define DEBUG_BUFMAX 4096
-static char debug_buffer[DEBUG_BUFMAX];
-
-static ssize_t debug_read(struct file *file, char __user *buf,
-			  size_t count, loff_t *ppos)
-{
-	int (*fill)(char *buf, int max) = file->private_data;
-	int bsize = fill(debug_buffer, DEBUG_BUFMAX);
-	return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize);
-}
-
-static const struct file_operations debug_ops = {
-	.read = debug_read,
-	.open = simple_open,
-	.llseek = default_llseek,
-};
-
-static void debug_create(const char *name, umode_t mode,
-			 struct dentry *dent,
-			 int (*fill)(char *buf, int max))
-{
-	debugfs_create_file(name, mode, dent, fill, &debug_ops);
-}
-
-int __init smd_debugfs_init(void)
-{
-	struct dentry *dent;
-
-	dent = debugfs_create_dir("smd", 0);
-	if (IS_ERR(dent))
-		return 1;
-
-	debug_create("ch", 0444, dent, debug_read_ch);
-	debug_create("stat", 0444, dent, debug_read_stat);
-	debug_create("mem", 0444, dent, debug_read_mem);
-	debug_create("version", 0444, dent, debug_read_version);
-	debug_create("tbl", 0444, dent, debug_read_alloc_tbl);
-	debug_create("build", 0444, dent, debug_read_build_id);
-
-	return 0;
-}
-
-#endif
-
-
-#define MAX_NUM_SLEEP_CLIENTS		64
-#define MAX_SLEEP_NAME_LEN		8
-
-#define NUM_GPIO_INT_REGISTERS		6
-#define GPIO_SMEM_NUM_GROUPS		2
-#define GPIO_SMEM_MAX_PC_INTERRUPTS	8
-
-struct tramp_gpio_save {
-	unsigned int enable;
-	unsigned int detect;
-	unsigned int polarity;
-};
-
-struct tramp_gpio_smem {
-	uint16_t num_fired[GPIO_SMEM_NUM_GROUPS];
-	uint16_t fired[GPIO_SMEM_NUM_GROUPS][GPIO_SMEM_MAX_PC_INTERRUPTS];
-	uint32_t enabled[NUM_GPIO_INT_REGISTERS];
-	uint32_t detection[NUM_GPIO_INT_REGISTERS];
-	uint32_t polarity[NUM_GPIO_INT_REGISTERS];
-};
-
-
-void smsm_print_sleep_info(void)
-{
-	unsigned long flags;
-	uint32_t *ptr;
-#ifndef CONFIG_ARCH_MSM_SCORPION
-	struct tramp_gpio_smem *gpio;
-	struct smsm_interrupt_info *int_info;
-#endif
-
-
-	spin_lock_irqsave(&smem_lock, flags);
-
-	ptr = smem_alloc(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
-	if (ptr)
-		pr_info("SMEM_SMSM_SLEEP_DELAY: %x\n", *ptr);
-
-	ptr = smem_alloc(SMEM_SMSM_LIMIT_SLEEP, sizeof(*ptr));
-	if (ptr)
-		pr_info("SMEM_SMSM_LIMIT_SLEEP: %x\n", *ptr);
-
-	ptr = smem_alloc(SMEM_SLEEP_POWER_COLLAPSE_DISABLED, sizeof(*ptr));
-	if (ptr)
-		pr_info("SMEM_SLEEP_POWER_COLLAPSE_DISABLED: %x\n", *ptr);
-
-#ifndef CONFIG_ARCH_MSM_SCORPION
-	int_info = smem_alloc(SMEM_SMSM_INT_INFO, sizeof(*int_info));
-	if (int_info)
-		pr_info("SMEM_SMSM_INT_INFO %x %x %x\n",
-			int_info->interrupt_mask,
-			int_info->pending_interrupts,
-			int_info->wakeup_reason);
-
-	gpio = smem_alloc(SMEM_GPIO_INT, sizeof(*gpio));
-	if (gpio) {
-		int i;
-		for (i = 0; i < NUM_GPIO_INT_REGISTERS; i++)
-			pr_info("SMEM_GPIO_INT: %d: e %x d %x p %x\n",
-				i, gpio->enabled[i], gpio->detection[i],
-				gpio->polarity[i]);
-
-		for (i = 0; i < GPIO_SMEM_NUM_GROUPS; i++)
-			pr_info("SMEM_GPIO_INT: %d: f %d: %d %d...\n",
-				i, gpio->num_fired[i], gpio->fired[i][0],
-				gpio->fired[i][1]);
-	}
-#else
-#endif
-	spin_unlock_irqrestore(&smem_lock, flags);
-}
-
diff --git a/arch/arm/mach-msm/smd_private.h b/arch/arm/mach-msm/smd_private.h
deleted file mode 100644
index 727bfe68aa9b..000000000000
--- a/arch/arm/mach-msm/smd_private.h
+++ /dev/null
@@ -1,403 +0,0 @@
-/* arch/arm/mach-msm/smd_private.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
-#define _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
-
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/io.h>
-
-#include <mach/msm_iomap.h>
-
-struct smem_heap_info {
-	unsigned initialized;
-	unsigned free_offset;
-	unsigned heap_remaining;
-	unsigned reserved;
-};
-
-struct smem_heap_entry {
-	unsigned allocated;
-	unsigned offset;
-	unsigned size;
-	unsigned reserved;
-};
-
-struct smem_proc_comm {
-	unsigned command;
-	unsigned status;
-	unsigned data1;
-	unsigned data2;
-};
-
-#define PC_APPS  0
-#define PC_MODEM 1
-
-#define VERSION_SMD       0
-#define VERSION_QDSP6     4
-#define VERSION_APPS_SBL  6
-#define VERSION_MODEM_SBL 7
-#define VERSION_APPS      8
-#define VERSION_MODEM     9
-
-struct smem_shared {
-	struct smem_proc_comm proc_comm[4];
-	unsigned version[32];
-	struct smem_heap_info heap_info;
-	struct smem_heap_entry heap_toc[512];
-};
-
-#define SMSM_V1_SIZE		(sizeof(unsigned) * 8)
-#define SMSM_V2_SIZE		(sizeof(unsigned) * 4)
-
-#ifdef CONFIG_MSM_SMD_PKG3
-struct smsm_interrupt_info {
-	uint32_t interrupt_mask;
-	uint32_t pending_interrupts;
-	uint32_t wakeup_reason;
-};
-#else
-#define DEM_MAX_PORT_NAME_LEN (20)
-struct msm_dem_slave_data {
-	uint32_t sleep_time;
-	uint32_t interrupt_mask;
-	uint32_t resources_used;
-	uint32_t reserved1;
-
-	uint32_t wakeup_reason;
-	uint32_t pending_interrupts;
-	uint32_t rpc_prog;
-	uint32_t rpc_proc;
-	char     smd_port_name[DEM_MAX_PORT_NAME_LEN];
-	uint32_t reserved2;
-};
-#endif
-
-#define SZ_DIAG_ERR_MSG 0xC8
-#define ID_DIAG_ERR_MSG SMEM_DIAG_ERR_MESSAGE
-#define ID_SMD_CHANNELS SMEM_SMD_BASE_ID
-#define ID_SHARED_STATE SMEM_SMSM_SHARED_STATE
-#define ID_CH_ALLOC_TBL SMEM_CHANNEL_ALLOC_TBL
-
-#define SMSM_INIT		0x00000001
-#define SMSM_SMDINIT		0x00000008
-#define SMSM_RPCINIT		0x00000020
-#define SMSM_RESET		0x00000040
-#define SMSM_RSA		0x00000080
-#define SMSM_RUN		0x00000100
-#define SMSM_PWRC		0x00000200
-#define SMSM_TIMEWAIT		0x00000400
-#define SMSM_TIMEINIT		0x00000800
-#define SMSM_PWRC_EARLY_EXIT	0x00001000
-#define SMSM_WFPI		0x00002000
-#define SMSM_SLEEP		0x00004000
-#define SMSM_SLEEPEXIT		0x00008000
-#define SMSM_APPS_REBOOT	0x00020000
-#define SMSM_SYSTEM_POWER_DOWN	0x00040000
-#define SMSM_SYSTEM_REBOOT	0x00080000
-#define SMSM_SYSTEM_DOWNLOAD	0x00100000
-#define SMSM_PWRC_SUSPEND	0x00200000
-#define SMSM_APPS_SHUTDOWN	0x00400000
-#define SMSM_SMD_LOOPBACK	0x00800000
-#define SMSM_RUN_QUIET		0x01000000
-#define SMSM_MODEM_WAIT		0x02000000
-#define SMSM_MODEM_BREAK	0x04000000
-#define SMSM_MODEM_CONTINUE	0x08000000
-#define SMSM_UNKNOWN		0x80000000
-
-#define SMSM_WKUP_REASON_RPC	0x00000001
-#define SMSM_WKUP_REASON_INT	0x00000002
-#define SMSM_WKUP_REASON_GPIO	0x00000004
-#define SMSM_WKUP_REASON_TIMER	0x00000008
-#define SMSM_WKUP_REASON_ALARM	0x00000010
-#define SMSM_WKUP_REASON_RESET	0x00000020
-
-#ifdef CONFIG_ARCH_MSM7X00A
-enum smsm_state_item {
-	SMSM_STATE_APPS = 1,
-	SMSM_STATE_MODEM = 3,
-	SMSM_STATE_COUNT,
-};
-#else
-enum smsm_state_item {
-	SMSM_STATE_APPS,
-	SMSM_STATE_MODEM,
-	SMSM_STATE_HEXAGON,
-	SMSM_STATE_APPS_DEM,
-	SMSM_STATE_MODEM_DEM,
-	SMSM_STATE_QDSP6_DEM,
-	SMSM_STATE_POWER_MASTER_DEM,
-	SMSM_STATE_TIME_MASTER_DEM,
-	SMSM_STATE_COUNT,
-};
-#endif
-
-void *smem_alloc(unsigned id, unsigned size);
-int smsm_change_state(enum smsm_state_item item, uint32_t clear_mask, uint32_t set_mask);
-uint32_t smsm_get_state(enum smsm_state_item item);
-int smsm_set_sleep_duration(uint32_t delay);
-void smsm_print_sleep_info(void);
-
-#define SMEM_NUM_SMD_CHANNELS        64
-
-typedef enum {
-	/* fixed items */
-	SMEM_PROC_COMM = 0,
-	SMEM_HEAP_INFO,
-	SMEM_ALLOCATION_TABLE,
-	SMEM_VERSION_INFO,
-	SMEM_HW_RESET_DETECT,
-	SMEM_AARM_WARM_BOOT,
-	SMEM_DIAG_ERR_MESSAGE,
-	SMEM_SPINLOCK_ARRAY,
-	SMEM_MEMORY_BARRIER_LOCATION,
-
-	/* dynamic items */
-	SMEM_AARM_PARTITION_TABLE,
-	SMEM_AARM_BAD_BLOCK_TABLE,
-	SMEM_RESERVE_BAD_BLOCKS,
-	SMEM_WM_UUID,
-	SMEM_CHANNEL_ALLOC_TBL,
-	SMEM_SMD_BASE_ID,
-	SMEM_SMEM_LOG_IDX = SMEM_SMD_BASE_ID + SMEM_NUM_SMD_CHANNELS,
-	SMEM_SMEM_LOG_EVENTS,
-	SMEM_SMEM_STATIC_LOG_IDX,
-	SMEM_SMEM_STATIC_LOG_EVENTS,
-	SMEM_SMEM_SLOW_CLOCK_SYNC,
-	SMEM_SMEM_SLOW_CLOCK_VALUE,
-	SMEM_BIO_LED_BUF,
-	SMEM_SMSM_SHARED_STATE,
-	SMEM_SMSM_INT_INFO,
-	SMEM_SMSM_SLEEP_DELAY,
-	SMEM_SMSM_LIMIT_SLEEP,
-	SMEM_SLEEP_POWER_COLLAPSE_DISABLED,
-	SMEM_KEYPAD_KEYS_PRESSED,
-	SMEM_KEYPAD_STATE_UPDATED,
-	SMEM_KEYPAD_STATE_IDX,
-	SMEM_GPIO_INT,
-	SMEM_MDDI_LCD_IDX,
-	SMEM_MDDI_HOST_DRIVER_STATE,
-	SMEM_MDDI_LCD_DISP_STATE,
-	SMEM_LCD_CUR_PANEL,
-	SMEM_MARM_BOOT_SEGMENT_INFO,
-	SMEM_AARM_BOOT_SEGMENT_INFO,
-	SMEM_SLEEP_STATIC,
-	SMEM_SCORPION_FREQUENCY,
-	SMEM_SMD_PROFILES,
-	SMEM_TSSC_BUSY,
-	SMEM_HS_SUSPEND_FILTER_INFO,
-	SMEM_BATT_INFO,
-	SMEM_APPS_BOOT_MODE,
-	SMEM_VERSION_FIRST,
-	SMEM_VERSION_LAST = SMEM_VERSION_FIRST + 24,
-	SMEM_OSS_RRCASN1_BUF1,
-	SMEM_OSS_RRCASN1_BUF2,
-	SMEM_ID_VENDOR0,
-	SMEM_ID_VENDOR1,
-	SMEM_ID_VENDOR2,
-	SMEM_HW_SW_BUILD_ID,
-	SMEM_SMD_BLOCK_PORT_BASE_ID,
-	SMEM_SMD_BLOCK_PORT_PROC0_HEAP = SMEM_SMD_BLOCK_PORT_BASE_ID + SMEM_NUM_SMD_CHANNELS,
-	SMEM_SMD_BLOCK_PORT_PROC1_HEAP = SMEM_SMD_BLOCK_PORT_PROC0_HEAP + SMEM_NUM_SMD_CHANNELS,
-	SMEM_I2C_MUTEX = SMEM_SMD_BLOCK_PORT_PROC1_HEAP + SMEM_NUM_SMD_CHANNELS,
-	SMEM_SCLK_CONVERSION,
-	SMEM_SMD_SMSM_INTR_MUX,
-	SMEM_SMSM_CPU_INTR_MASK,
-	SMEM_APPS_DEM_SLAVE_DATA,
-	SMEM_QDSP6_DEM_SLAVE_DATA,
-	SMEM_CLKREGIM_BSP,
-	SMEM_CLKREGIM_SOURCES,
-	SMEM_SMD_FIFO_BASE_ID,
-	SMEM_USABLE_RAM_PARTITION_TABLE = SMEM_SMD_FIFO_BASE_ID + SMEM_NUM_SMD_CHANNELS,
-	SMEM_POWER_ON_STATUS_INFO,
-	SMEM_DAL_AREA,
-	SMEM_SMEM_LOG_POWER_IDX,
-	SMEM_SMEM_LOG_POWER_WRAP,
-	SMEM_SMEM_LOG_POWER_EVENTS,
-	SMEM_ERR_CRASH_LOG,
-	SMEM_ERR_F3_TRACE_LOG,
-	SMEM_NUM_ITEMS,
-} smem_mem_type;
-
-
-#define SMD_SS_CLOSED		0x00000000
-#define SMD_SS_OPENING		0x00000001
-#define SMD_SS_OPENED		0x00000002
-#define SMD_SS_FLUSHING		0x00000003
-#define SMD_SS_CLOSING		0x00000004
-#define SMD_SS_RESET		0x00000005
-#define SMD_SS_RESET_OPENING	0x00000006
-
-#define SMD_BUF_SIZE		8192
-#define SMD_CHANNELS		64
-
-#define SMD_HEADER_SIZE		20
-
-struct smd_alloc_elm {
-	char name[20];
-	uint32_t cid;
-	uint32_t ctype;
-	uint32_t ref_count;
-};
-
-struct smd_half_channel {
-	unsigned state;
-	unsigned char fDSR;
-	unsigned char fCTS;
-	unsigned char fCD;
-	unsigned char fRI;
-	unsigned char fHEAD;
-	unsigned char fTAIL;
-	unsigned char fSTATE;
-	unsigned char fUNUSED;
-	unsigned tail;
-	unsigned head;
-} __attribute__(( aligned(4), packed ));
-
-/* Only used on SMD package v3 on msm7201a */
-struct smd_shared_v1 {
-	struct smd_half_channel ch0;
-	unsigned char data0[SMD_BUF_SIZE];
-	struct smd_half_channel ch1;
-	unsigned char data1[SMD_BUF_SIZE];
-};
-
-/* Used on SMD package v4 */
-struct smd_shared_v2 {
-	struct smd_half_channel ch0;
-	struct smd_half_channel ch1;
-};
-
-struct smd_channel {
-	volatile struct smd_half_channel *send;
-	volatile struct smd_half_channel *recv;
-	unsigned char *send_data;
-	unsigned char *recv_data;
-
-	unsigned fifo_mask;
-	unsigned fifo_size;
-	unsigned current_packet;
-	unsigned n;
-
-	struct list_head ch_list;
-
-	void *priv;
-	void (*notify)(void *priv, unsigned flags);
-
-	int (*read)(struct smd_channel *ch, void *data, int len);
-	int (*write)(struct smd_channel *ch, const void *data, int len);
-	int (*read_avail)(struct smd_channel *ch);
-	int (*write_avail)(struct smd_channel *ch);
-
-	void (*update_state)(struct smd_channel *ch);
-	unsigned last_state;
-	void (*notify_other_cpu)(void);
-	unsigned type;
-
-	char name[32];
-	struct platform_device pdev;
-};
-
-#define SMD_TYPE_MASK		0x0FF
-#define SMD_TYPE_APPS_MODEM	0x000
-#define SMD_TYPE_APPS_DSP	0x001
-#define SMD_TYPE_MODEM_DSP	0x002
-
-#define SMD_KIND_MASK		0xF00
-#define SMD_KIND_UNKNOWN	0x000
-#define SMD_KIND_STREAM		0x100
-#define SMD_KIND_PACKET		0x200
-
-extern struct list_head smd_ch_closed_list;
-extern struct list_head smd_ch_list_modem;
-extern struct list_head smd_ch_list_dsp;
-
-extern spinlock_t smd_lock;
-extern spinlock_t smem_lock;
-
-void *smem_find(unsigned id, unsigned size);
-void *smem_item(unsigned id, unsigned *size);
-uint32_t raw_smsm_get_state(enum smsm_state_item item);
-
-extern void msm_init_last_radio_log(struct module *);
-
-#ifdef CONFIG_MSM_SMD_PKG3
-/*
- * This allocator assumes an SMD Package v3 which only exists on
- * MSM7x00 SoC's.
- */
-static inline int _smd_alloc_channel(struct smd_channel *ch)
-{
-	struct smd_shared_v1 *shared1;
-
-	shared1 = smem_alloc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1));
-	if (!shared1) {
-		pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n);
-		return -1;
-	}
-	ch->send = &shared1->ch0;
-	ch->recv = &shared1->ch1;
-	ch->send_data = shared1->data0;
-	ch->recv_data = shared1->data1;
-	ch->fifo_size = SMD_BUF_SIZE;
-	return 0;
-}
-#else
-/*
- * This allocator assumes an SMD Package v4, the most common
- * and the default.
- */
-static inline int _smd_alloc_channel(struct smd_channel *ch)
-{
-	struct smd_shared_v2 *shared2;
-	void *buffer;
-	unsigned buffer_sz;
-
-	shared2 = smem_alloc(SMEM_SMD_BASE_ID + ch->n, sizeof(*shared2));
-	buffer = smem_item(SMEM_SMD_FIFO_BASE_ID + ch->n, &buffer_sz);
-
-	if (!buffer)
-		return -1;
-
-	/* buffer must be a power-of-two size */
-	if (buffer_sz & (buffer_sz - 1))
-		return -1;
-
-	buffer_sz /= 2;
-	ch->send = &shared2->ch0;
-	ch->recv = &shared2->ch1;
-	ch->send_data = buffer;
-	ch->recv_data = buffer + buffer_sz;
-	ch->fifo_size = buffer_sz;
-	return 0;
-}
-#endif /* CONFIG_MSM_SMD_PKG3 */
-
-#if defined(CONFIG_ARCH_MSM7X30)
-static inline void msm_a2m_int(uint32_t irq)
-{
-	writel(1 << irq, MSM_GCC_BASE + 0x8);
-}
-#else
-static inline void msm_a2m_int(uint32_t irq)
-{
-	writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
-}
-#endif /* CONFIG_ARCH_MSM7X30 */
-
-
-#endif
diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c
deleted file mode 100644
index bd66ed04d6dc..000000000000
--- a/arch/arm/mach-msm/vreg.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/* arch/arm/mach-msm/vreg.c
- *
- * Copyright (C) 2008 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <mach/vreg.h>
-
-#include "proc_comm.h"
-
-struct vreg {
-	const char *name;
-	unsigned id;
-	int status;
-	unsigned refcnt;
-};
-
-#define VREG(_name, _id, _status, _refcnt) \
-	{ .name = _name, .id = _id, .status = _status, .refcnt = _refcnt }
-
-static struct vreg vregs[] = {
-	VREG("msma",	0, 0, 0),
-	VREG("msmp",	1, 0, 0),
-	VREG("msme1",	2, 0, 0),
-	VREG("msmc1",	3, 0, 0),
-	VREG("msmc2",	4, 0, 0),
-	VREG("gp3",	5, 0, 0),
-	VREG("msme2",	6, 0, 0),
-	VREG("gp4",	7, 0, 0),
-	VREG("gp1",	8, 0, 0),
-	VREG("tcxo",	9, 0, 0),
-	VREG("pa",	10, 0, 0),
-	VREG("rftx",	11, 0, 0),
-	VREG("rfrx1",	12, 0, 0),
-	VREG("rfrx2",	13, 0, 0),
-	VREG("synt",	14, 0, 0),
-	VREG("wlan",	15, 0, 0),
-	VREG("usb",	16, 0, 0),
-	VREG("boost",	17, 0, 0),
-	VREG("mmc",	18, 0, 0),
-	VREG("ruim",	19, 0, 0),
-	VREG("msmc0",	20, 0, 0),
-	VREG("gp2",	21, 0, 0),
-	VREG("gp5",	22, 0, 0),
-	VREG("gp6",	23, 0, 0),
-	VREG("rf",	24, 0, 0),
-	VREG("rf_vco",	26, 0, 0),
-	VREG("mpll",	27, 0, 0),
-	VREG("s2",	28, 0, 0),
-	VREG("s3",	29, 0, 0),
-	VREG("rfubm",	30, 0, 0),
-	VREG("ncp",	31, 0, 0),
-	VREG("gp7",	32, 0, 0),
-	VREG("gp8",	33, 0, 0),
-	VREG("gp9",	34, 0, 0),
-	VREG("gp10",	35, 0, 0),
-	VREG("gp11",	36, 0, 0),
-	VREG("gp12",	37, 0, 0),
-	VREG("gp13",	38, 0, 0),
-	VREG("gp14",	39, 0, 0),
-	VREG("gp15",	40, 0, 0),
-	VREG("gp16",	41, 0, 0),
-	VREG("gp17",	42, 0, 0),
-	VREG("s4",	43, 0, 0),
-	VREG("usb2",	44, 0, 0),
-	VREG("wlan2",	45, 0, 0),
-	VREG("xo_out",	46, 0, 0),
-	VREG("lvsw0",	47, 0, 0),
-	VREG("lvsw1",	48, 0, 0),
-};
-
-struct vreg *vreg_get(struct device *dev, const char *id)
-{
-	int n;
-	for (n = 0; n < ARRAY_SIZE(vregs); n++) {
-		if (!strcmp(vregs[n].name, id))
-			return vregs + n;
-	}
-	return ERR_PTR(-ENOENT);
-}
-
-void vreg_put(struct vreg *vreg)
-{
-}
-
-int vreg_enable(struct vreg *vreg)
-{
-	unsigned id = vreg->id;
-	unsigned enable = 1;
-
-	if (vreg->refcnt == 0)
-		vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
-
-	if ((vreg->refcnt < UINT_MAX) && (!vreg->status))
-		vreg->refcnt++;
-
-	return vreg->status;
-}
-
-int vreg_disable(struct vreg *vreg)
-{
-	unsigned id = vreg->id;
-	unsigned enable = 0;
-
-	if (!vreg->refcnt)
-		return 0;
-
-	if (vreg->refcnt == 1)
-		vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
-
-	if (!vreg->status)
-		vreg->refcnt--;
-
-	return vreg->status;
-}
-
-int vreg_set_level(struct vreg *vreg, unsigned mv)
-{
-	unsigned id = vreg->id;
-
-	vreg->status = msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
-	return vreg->status;
-}
-
-#if defined(CONFIG_DEBUG_FS)
-
-static int vreg_debug_set(void *data, u64 val)
-{
-	struct vreg *vreg = data;
-	switch (val) {
-	case 0:
-		vreg_disable(vreg);
-		break;
-	case 1:
-		vreg_enable(vreg);
-		break;
-	default:
-		vreg_set_level(vreg, val);
-		break;
-	}
-	return 0;
-}
-
-static int vreg_debug_get(void *data, u64 *val)
-{
-	struct vreg *vreg = data;
-
-	if (!vreg->status)
-		*val = 0;
-	else
-		*val = 1;
-
-	return 0;
-}
-
-static int vreg_debug_count_set(void *data, u64 val)
-{
-	struct vreg *vreg = data;
-	if (val > UINT_MAX)
-		val = UINT_MAX;
-	vreg->refcnt = val;
-	return 0;
-}
-
-static int vreg_debug_count_get(void *data, u64 *val)
-{
-	struct vreg *vreg = data;
-
-	*val = vreg->refcnt;
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n");
-DEFINE_SIMPLE_ATTRIBUTE(vreg_count_fops, vreg_debug_count_get,
-			vreg_debug_count_set, "%llu\n");
-
-static int __init vreg_debug_init(void)
-{
-	struct dentry *dent;
-	int n;
-	char name[32];
-	const char *refcnt_name = "_refcnt";
-
-	dent = debugfs_create_dir("vreg", 0);
-	if (IS_ERR(dent))
-		return 0;
-
-	for (n = 0; n < ARRAY_SIZE(vregs); n++) {
-		(void) debugfs_create_file(vregs[n].name, 0644,
-					   dent, vregs + n, &vreg_fops);
-
-		strlcpy(name, vregs[n].name, sizeof(name));
-		strlcat(name, refcnt_name, sizeof(name));
-		(void) debugfs_create_file(name, 0644,
-					   dent, vregs + n, &vreg_count_fops);
-	}
-
-	return 0;
-}
-
-device_initcall(vreg_debug_init);
-#endif