summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-lpc32xx
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-28 12:17:06 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-28 12:17:06 -0700
commitff877c498eb2f9c4ea386270642e383bc867f63c (patch)
treeae37e2f57ac6e6d19d01b7380f77db2a1c6c5b14 /arch/arm/mach-lpc32xx
parent529b73fc0a9764050dcc597f4851728e8ff59165 (diff)
parent1f5b7dcfdad3840d4bce27ab0b3cc8f376b81544 (diff)
downloadlinux-ff877c498eb2f9c4ea386270642e383bc867f63c.tar.bz2
Merge tag 'drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull "ARM: More SoC driver updates" from Olof Johansson: "This branch contains a handful of driver updates, mostly to the LPC32xx platform but also for Samsung EXYNOS and Davinci. It had a few context conflicts against patches already merged through fixes-non-critical. We should have resolved this early during the development cycle by pulling them in as a dependency, instead I did it after the fact this time." * tag 'drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: gpio/samsung: use ioremap() for EXYNOS4 GPIOlib gpio/samsung: add support GPIOlib for EXYNOS5250 ARM: EXYNOS: add support GPIO for EXYNOS5250 ARM: LPC32xx: Ethernet support ARM: LPC32xx: USB Support ARM: davinci: dm644x evm: add support for VPBE display ARM: davinci: dm644x: add support for v4l2 video display ARM: EXYNOS: Hook up JPEG PD to generic PD infrastructure ARM: EXYNOS: Hook up G2D PD to generic PD infrastructure arm: lpc32xx: phy3250: add rtc & touch device ARM: LPC32xx: clock.c: Clock registration fixes ARM: LPC32xx: clock.c: jiffies wrapping ARM: LPC32xx: clock.c: Missing header file ARM: LPC32XX: Remove broken non-static declaration ARM: LPC32xx: clock.c: Fix mutex lock issues ARM: LPC32xx: clock.c: warning fix ARM: LPC32xx: Added lpc32xx_defconfig
Diffstat (limited to 'arch/arm/mach-lpc32xx')
-rw-r--r--arch/arm/mach-lpc32xx/Kconfig25
-rw-r--r--arch/arm/mach-lpc32xx/clock.c87
-rw-r--r--arch/arm/mach-lpc32xx/common.c47
-rw-r--r--arch/arm/mach-lpc32xx/common.h4
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/board.h24
-rw-r--r--arch/arm/mach-lpc32xx/irq.c4
-rw-r--r--arch/arm/mach-lpc32xx/phy3250.c3
7 files changed, 169 insertions, 25 deletions
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
index fde663508696..75946ac89ee9 100644
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -29,5 +29,30 @@ config ARCH_LPC32XX_UART6_SELECT
endmenu
+menu "LPC32XX chip components"
+
+config ARCH_LPC32XX_IRAM_FOR_NET
+ bool "Use IRAM for network buffers"
+ default y
+ help
+ Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as
+ network buffer. If the total combined required buffer sizes is
+ larger than the size of IRAM, then SDRAM will be used instead.
+
+ This can be enabled safely if the IRAM is not intended for other
+ uses.
+
+config ARCH_LPC32XX_MII_SUPPORT
+ bool "Check to enable MII support or leave disabled for RMII support"
+ help
+ Say Y here to enable MII support, or N for RMII support. Regardless of
+ which support is selected, the ethernet interface driver needs to be
+ selected in the device driver networking section.
+
+ The PHY3250 reference board uses RMII, so users of this board should
+ say N.
+
+endmenu
+
endif
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index f55c772d1816..b7ef51119d37 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -87,6 +87,7 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/device.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/amba/bus.h>
@@ -100,6 +101,8 @@
static DEFINE_SPINLOCK(global_clkregs_lock);
+static int usb_pll_enable, usb_pll_valid;
+
static struct clk clk_armpll;
static struct clk clk_usbpll;
@@ -384,30 +387,62 @@ static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
static int local_usbpll_enable(struct clk *clk, int enable)
{
u32 reg;
- int ret = -ENODEV;
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
+ int ret = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(20);
reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- if (enable == 0) {
- reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
- LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
- } else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+ __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
+ LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
+ LPC32XX_CLKPWR_USB_CTRL);
+ __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
+ LPC32XX_CLKPWR_USB_CTRL);
+
+ if (enable && usb_pll_valid && usb_pll_enable) {
+ ret = -ENODEV;
+ /*
+ * If the PLL rate has been previously set, then the rate
+ * in the PLL register is valid and can be enabled here.
+ * Otherwise, it needs to be enabled as part of setrate.
+ */
+
+ /*
+ * Gate clock into PLL
+ */
reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
- /* Wait for PLL lock */
+ /*
+ * Enable PLL
+ */
+ reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
+ __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+ /*
+ * Wait for PLL to lock
+ */
while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
ret = 0;
+ else
+ udelay(10);
}
+ /*
+ * Gate clock from PLL if PLL is locked
+ */
if (ret == 0) {
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+ __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
+ LPC32XX_CLKPWR_USB_CTRL);
+ } else {
+ __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+ LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
+ LPC32XX_CLKPWR_USB_CTRL);
}
+ } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) {
+ usb_pll_valid = 0;
+ usb_pll_enable = 0;
}
return ret;
@@ -425,7 +460,7 @@ static unsigned long local_usbpll_round_rate(struct clk *clk,
*/
rate = rate * 1000;
- clkin = clk->parent->rate;
+ clkin = clk->get_rate(clk);
usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
clkin = clkin / usbdiv;
@@ -439,7 +474,8 @@ static unsigned long local_usbpll_round_rate(struct clk *clk,
static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
{
- u32 clkin, reg, usbdiv;
+ int ret = -ENODEV;
+ u32 clkin, usbdiv;
struct clk_pll_setup pllsetup;
/*
@@ -448,7 +484,7 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
*/
rate = rate * 1000;
- clkin = clk->get_rate(clk);
+ clkin = clk->get_rate(clk->parent);
usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
clkin = clkin / usbdiv;
@@ -457,22 +493,25 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
return -EINVAL;
+ /*
+ * Disable PLL clocks during PLL change
+ */
local_usbpll_enable(clk, 0);
-
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
- pllsetup.analog_on = 1;
+ pllsetup.analog_on = 0;
local_clk_usbpll_setup(&pllsetup);
- clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+ /*
+ * Start USB PLL and check PLL status
+ */
+
+ usb_pll_valid = 1;
+ usb_pll_enable = 1;
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+ ret = local_usbpll_enable(clk, 1);
+ if (ret >= 0)
+ clk->rate = clk_check_pll_setup(clkin, &pllsetup);
- return 0;
+ return ret;
}
static struct clk clk_usbpll = {
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 6c76bb36559b..bbbf063a74c2 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -160,6 +160,53 @@ struct platform_device lpc32xx_adc_device = {
};
/*
+ * USB support
+ */
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32) 0;
+static struct resource ohci_resources[] = {
+ {
+ .start = IO_ADDRESS(LPC32XX_USB_BASE),
+ .end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_LPC32XX_USB_HOST,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+struct platform_device lpc32xx_ohci_device = {
+ .name = "usb-ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+ .num_resources = ARRAY_SIZE(ohci_resources),
+ .resource = ohci_resources,
+};
+
+/*
+ * Network Support
+ */
+static struct resource net_resources[] = {
+ [0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
+ [1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
+ [2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
+};
+
+static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
+struct platform_device lpc32xx_net_device = {
+ .name = "lpc-eth",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lpc32xx_mac_dma_mask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .num_resources = ARRAY_SIZE(net_resources),
+ .resource = net_resources,
+};
+
+/*
* Returns the unique ID for the device
*/
void lpc32xx_get_uid(u32 devid[4])
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 68f2e46d98ad..68e45e8c9486 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -19,6 +19,7 @@
#ifndef __LPC32XX_COMMON_H
#define __LPC32XX_COMMON_H
+#include <mach/board.h>
#include <linux/platform_device.h>
/*
@@ -31,6 +32,8 @@ extern struct platform_device lpc32xx_i2c2_device;
extern struct platform_device lpc32xx_tsc_device;
extern struct platform_device lpc32xx_adc_device;
extern struct platform_device lpc32xx_rtc_device;
+extern struct platform_device lpc32xx_ohci_device;
+extern struct platform_device lpc32xx_net_device;
/*
* Other arch specific structures and functions
@@ -67,7 +70,6 @@ extern u32 clk_get_pclk_div(void);
extern void lpc32xx_get_uid(u32 devid[4]);
extern u32 lpc32xx_return_iram_size(void);
-
/*
* Pointers used for sizing and copying suspend function data
*/
diff --git a/arch/arm/mach-lpc32xx/include/mach/board.h b/arch/arm/mach-lpc32xx/include/mach/board.h
new file mode 100644
index 000000000000..52531ca7bd1d
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/board.h
@@ -0,0 +1,24 @@
+/*
+ * arm/arch/mach-lpc32xx/include/mach/board.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+extern u32 lpc32xx_return_iram_size(void);
+
+#endif /* __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index c74de01ab5b6..d080cb1123dd 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -150,6 +150,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
},
+ [IRQ_LPC32XX_ETHERNET] = {
+ .event_group = &lpc32xx_event_int_regs,
+ .mask = LPC32XX_CLKPWR_INTSRC_MAC_BIT,
+ },
[IRQ_LPC32XX_USB_OTG_ATX] = {
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 0d79a3f8a5e0..7f7401ec7487 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/platform.h>
+#include <mach/board.h>
#include <mach/gpio-lpc32xx.h>
#include "common.h"
@@ -255,6 +256,8 @@ static struct platform_device *phy3250_devs[] __initdata = {
&lpc32xx_watchdog_device,
&lpc32xx_gpio_led_device,
&lpc32xx_adc_device,
+ &lpc32xx_ohci_device,
+ &lpc32xx_net_device,
};
static struct amba_device *amba_devs[] __initdata = {