Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A few simple cleanups across multiple platforms, not much standing
  out:

   - lpc32xx removes its private implementation of the clk API, after
     generic code was merged in 4.5
   - all unused Makefile.boot files get removed
   - a number of simplifications for shmobile
   - asm/clkdev.h gets replaced with the asm-generic version after all
     mach/clkdev.h implementations are gone"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: shmobile: Kconfig: Get rid of old comment
  ARM: shmobile: Consolidate SCU mapping code
  arm: lpc32xx: remove direct control of GPIOs from shared mach file
  arm: lpc32xx: remove selected HAVE_IDE
  arm: lpc32xx: switch to common clock framework
  ARM: Use generic clkdev.h header
  ARM: plat-versatile: Remove unused clock.c file
  ARM: netx: remove redundant "depends on ARCH_NETX"
  ARM: integrator: remove redundant select in Kconfig
  ARM: drop unused Makefile.boot of Multiplatform SoCs
  ARM: mvebu: add missing of_node_put()
  ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code
  ARM: shmobile: Typo s/MIPDR/MPIDR/
  ARM: shmobile: Add includes providing forward declarations
  ARM: shmobile: rcar-gen2: Make rcar_gen2_dma_contiguous static
  ARM: mv78xx0: use "depends on" instead of "if" after prompt

1 files changed, 0 insertions, 53 deletions

diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index e6f03783ad73..b2f9e226febe 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -36,7 +36,6 @@
 #include <linux/clk.h>
 #include <linux/mtd/lpc32xx_slc.h>
 #include <linux/mtd/lpc32xx_mlc.h>
-#include <linux/platform_data/gpio-lpc32xx.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -48,13 +47,6 @@
 #include "common.h"
 
 /*
- * Mapped GPIOLIB GPIOs
- */
-#define LCD_POWER_GPIO		LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
-#define BKL_POWER_GPIO		LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
-#define MMC_PWR_ENABLE_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5)
-
-/*
  * AMBA LCD controller
  */
 static struct clcd_panel conn_lcd_panel = {
@@ -97,20 +89,6 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb)
 	fb->fb.fix.smem_len = PANEL_SIZE;
 	fb->panel = &conn_lcd_panel;
 
-	if (gpio_request(LCD_POWER_GPIO, "LCD power"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			LCD_POWER_GPIO);
-	else if (gpio_direction_output(LCD_POWER_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			LCD_POWER_GPIO);
-
-	if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			BKL_POWER_GPIO);
-	else if (gpio_direction_output(BKL_POWER_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			BKL_POWER_GPIO);
-
 	return 0;
 }
 
@@ -126,29 +104,10 @@ static void lpc32xx_clcd_remove(struct clcd_fb *fb)
 		    fb->fb.fix.smem_start);
 }
 
-/*
- * On some early LCD modules (1307.0), the backlight logic is inverted.
- * For those board variants, swap the disable and enable states for
- * BKL_POWER_GPIO.
-*/
-static void clcd_disable(struct clcd_fb *fb)
-{
-	gpio_set_value(BKL_POWER_GPIO, 0);
-	gpio_set_value(LCD_POWER_GPIO, 0);
-}
-
-static void clcd_enable(struct clcd_fb *fb)
-{
-	gpio_set_value(BKL_POWER_GPIO, 1);
-	gpio_set_value(LCD_POWER_GPIO, 1);
-}
-
 static struct clcd_board lpc32xx_clcd_data = {
 	.name		= "Phytec LCD",
 	.check		= clcdfb_check,
 	.decode		= clcdfb_decode,
-	.disable	= clcd_disable,
-	.enable		= clcd_enable,
 	.setup		= lpc32xx_clcd_setup,
 	.mmap		= lpc32xx_clcd_mmap,
 	.remove		= lpc32xx_clcd_remove,
@@ -187,20 +146,9 @@ static struct pl08x_platform_data pl08x_pd = {
 	.mem_buses = PL08X_AHB1,
 };
 
-static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios)
-{
-	/* Only on and off are supported */
-	if (ios->power_mode == MMC_POWER_OFF)
-		gpio_set_value(MMC_PWR_ENABLE_GPIO, 0);
-	else
-		gpio_set_value(MMC_PWR_ENABLE_GPIO, 1);
-	return 0;
-}
-
 static struct mmci_platform_data lpc32xx_mmci_data = {
 	.ocr_mask	= MMC_VDD_30_31 | MMC_VDD_31_32 |
 			  MMC_VDD_32_33 | MMC_VDD_33_34,
-	.ios_handler	= mmc_handle_ios,
 };
 
 static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
@@ -259,7 +207,6 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
 	.atag_offset	= 0x100,
 	.map_io		= lpc32xx_map_io,
 	.init_irq	= lpc32xx_init_irq,
-	.init_time	= lpc32xx_timer_init,
 	.init_machine	= lpc3250_machine_init,
 	.dt_compat	= lpc32xx_dt_compat,
 MACHINE_END