ARM: ixp4xx: Delete Avila boardfiles

This board is replaced with the corresponding device tree.
There is also the "loft" board which is just a Kconfi entry
and which reuses the same boardfile.

If there is interest in the Loft variant and someone is willing
to test I can create a special DT superset for this board,
which only differs in PCI set-up.

Cc: Michael-Luke Jones <mlj28@cam.ac.uk>
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Tom Billman <kernel@giantshoulderinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

4 files changed, 0 insertions, 307 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 3cdf9e656c5b..617fee676f85 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -17,22 +17,6 @@ config MACH_IXP4XX_OF
 	help
 	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
 
-config MACH_AVILA
-	bool "Avila"
-	depends on IXP4XX_PCI_LEGACY
-	help
-	  Say 'Y' here if you want your kernel to support the Gateworks
-	  Avila Network Platform. For more information on this platform,
-	  see <file:Documentation/arm/ixp4xx.rst>.
-
-config MACH_LOFT
-    bool "Loft"
-    depends on MACH_AVILA
-    help
-	  Say 'Y' here if you want your kernel to support the Giant
-	  Shoulder Inc Loft board (a minor variation on the standard
-	  Gateworks Avila Network Platform).
-
 config ARCH_ADI_COYOTE
 	bool "Coyote"
 	depends on IXP4XX_PCI_LEGACY
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 53d8972ba4ff..a501234d91f6 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -10,7 +10,6 @@ obj-pci-n	:=
 obj-pci-$(CONFIG_MACH_IXP4XX_OF)	+= ixp4xx-of.o
 
 obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
-obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
@@ -20,7 +19,6 @@ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
 obj-y	+= common.o
 
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
-obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
deleted file mode 100644
index 2e5996a96dd3..000000000000
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/avila-pci.c
- *
- * Gateworks Avila board-level PCI initialization
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp-pci.c
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <asm/mach/pci.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-#define AVILA_MAX_DEV	4
-#define LOFT_MAX_DEV	6
-#define IRQ_LINES	4
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-
-void __init avila_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTD)
-	};
-
-	if (slot >= 1 &&
-	    slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
-	    pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % 4];
-
-	return -1;
-}
-
-struct hw_pci avila_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= avila_pci_preinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= avila_map_irq,
-};
-
-int __init avila_pci_init(void)
-{
-	if (machine_is_avila() || machine_is_loft())
-		pci_common_init(&avila_pci);
-	return 0;
-}
-
-subsys_initcall(avila_pci_init);
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
deleted file mode 100644
index ec1d3029f80c..000000000000
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/avila-setup.c
- *
- * Gateworks Avila board-setup
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp-setup.c
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/pata_ixp4xx_cf.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-#define AVILA_SDA_PIN	7
-#define AVILA_SCL_PIN	6
-
-static struct flash_platform_data avila_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource avila_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device avila_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &avila_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &avila_flash_resource,
-};
-
-static struct gpiod_lookup_table avila_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SCL_PIN,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct platform_device avila_i2c_gpio = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev	 = {
-		.platform_data	= NULL,
-	},
-};
-
-static struct resource avila_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}
-};
-
-static struct plat_serial8250_port avila_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device avila_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= avila_uart_data,
-	.num_resources		= 2,
-	.resource		= avila_uart_resources
-};
-
-static struct resource avila_pata_resources[] = {
-	{
-		.flags	= IORESOURCE_MEM
-	},
-	{
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "intrq",
-		.start	= IRQ_IXP4XX_GPIO12,
-		.end	= IRQ_IXP4XX_GPIO12,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct ixp4xx_pata_data avila_pata_data = {
-	.cs0_bits	= 0xbfff0043,
-	.cs1_bits	= 0xbfff0043,
-};
-
-static struct platform_device avila_pata = {
-	.name			= "pata_ixp4xx_cf",
-	.id			= 0,
-	.dev.platform_data      = &avila_pata_data,
-	.num_resources		= ARRAY_SIZE(avila_pata_resources),
-	.resource		= avila_pata_resources,
-};
-
-static struct platform_device *avila_devices[] __initdata = {
-	&avila_i2c_gpio,
-	&avila_flash,
-	&avila_uart
-};
-
-static void __init avila_init(void)
-{
-	ixp4xx_sys_init();
-
-	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	avila_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	gpiod_add_lookup_table(&avila_i2c_gpiod_table);
-
-	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
-
-	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-
-	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-
-	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-
-	platform_device_register(&avila_pata);
-
-}
-
-MACHINE_START(AVILA, "Gateworks Avila Network Platform")
-	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= avila_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-
- /*
-  * Loft is functionally equivalent to Avila except that it has a
-  * different number for the maximum PCI devices.  The MACHINE
-  * structure below is identical to Avila except for the comment.
-  */
-#ifdef CONFIG_MACH_LOFT
-MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
-	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= avila_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-