diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2017-09-26 20:27:09 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2017-12-08 15:32:53 +0100 |
commit | e0fc62a6552f3d9c21e73cc65844f9aad1892cf7 (patch) | |
tree | 2310cbf810a4576bf8e00881d051fe9ab02a733c /arch/arm/mach-ixp4xx/vulcan-setup.c | |
parent | 110e2a38c8daabb6f33e164dab6083afeeb2dd5e (diff) | |
download | linux-e0fc62a6552f3d9c21e73cc65844f9aad1892cf7.tar.bz2 |
w1: w1-gpio: Convert to use GPIO descriptors
The w1 master driver includes a complete open drain emulation
reimplementation among other things.
This converts the driver and all board files using it to use
GPIO descriptors associated with the device to look up the
GPIO wire, as well ass the optional pull-up GPIO line.
When probed from the device tree, the driver will just pick
descriptors and use them right off. For the two board files
in the kernel, we add descriptor lookups so we do not need
to keep any old platform data handling around for the GPIO
lines.
As the platform data is also a state container for this driver,
we augment it to contain the GPIO descriptors.
w1_gpio_write_bit_dir() and w1_gpio_write_bit_val() are gone
since this pair was a reimplementation of open drain emulation
which is now handled by gpiolib.
The special "linux,open-drain" flag is a bit of mishap here:
it has the same semantic as the same flags in I2C: it means
that something in the platform is setting up the line as
open drain behind our back. We handle this the same way as
in I2C.
To drive the pull-up, we need to bypass open drain emulation
in gpiolib for the line, and this is done by driving it high
using gpiod_set_raw_value() which has been augmented to have
the semantic of overriding the open drain emulation.
We also augment the documentation to reflect the way to pass
GPIO descriptors from the machine.
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/mach-ixp4xx/vulcan-setup.c')
-rw-r--r-- | arch/arm/mach-ixp4xx/vulcan-setup.c | 13 |
1 files changed, 11 insertions, 2 deletions
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 731fb2019ecb..2c03d2f6b647 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -16,6 +16,7 @@ #include <linux/serial_8250.h> #include <linux/io.h> #include <linux/w1-gpio.h> +#include <linux/gpio/machine.h> #include <linux/mtd/plat-ram.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -162,9 +163,16 @@ static struct platform_device vulcan_max6369 = { .num_resources = 1, }; +static struct gpiod_lookup_table vulcan_w1_gpiod_table = { + .dev_id = "w1-gpio", + .table = { + GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", 14, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + }, +}; + static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { - .pin = 14, - .ext_pullup_enable_pin = -EINVAL, + /* Intentionally left blank */ }; static struct platform_device vulcan_w1_gpio = { @@ -233,6 +241,7 @@ static void __init vulcan_init(void) IXP4XX_EXP_BUS_WR_EN | IXP4XX_EXP_BUS_BYTE_EN; + gpiod_add_lookup_table(&vulcan_w1_gpiod_table); platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices)); } |