diff options
author | Russell King <rmk+kernel@arm.linux.org.uk> | 2011-01-18 20:10:10 +0000 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2011-02-19 11:09:18 +0000 |
commit | 9dfec4fe6d2eb5580e5adcee8827dee3a16be49d (patch) | |
tree | 102f671cb6f9a00fb149445b3cb09e9aa207e177 /arch/arm/mach-integrator/integrator_cp.c | |
parent | 420c34e4ccbbacab56d199e90a214e24380077dd (diff) | |
download | linux-9dfec4fe6d2eb5580e5adcee8827dee3a16be49d.tar.bz2 |
ARM: integrator: switch Integrator platforms to use consolidated CLCD
This switches integrator platforms to use the consolidated CLCD
panel support, including the display capabilities. These capabilities
prevent the unsupported BGR565 mode being selected, while still
allowing RGB5551, BGR5551 and RGB565 modes.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-integrator/integrator_cp.c')
-rw-r--r-- | arch/arm/mach-integrator/integrator_cp.c | 65 |
1 files changed, 9 insertions, 56 deletions
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 860090247b3b..9c0203738aae 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -42,6 +42,8 @@ #include <asm/hardware/timer-sp.h> +#include <plat/clcd.h> + #include "common.h" #define INTCP_PA_FLASH_BASE 0x24000000 @@ -449,30 +451,6 @@ static struct amba_device aaci_device = { /* * CLCD support */ -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, - .grayscale = 0, -}; - /* * Ensure VGA is selected. */ @@ -500,49 +478,24 @@ static void cp_clcd_enable(struct clcd_fb *fb) CM_CTRL_n24BITEN, val); } -static unsigned long framesize = SZ_1M; - static int cp_clcd_setup(struct clcd_fb *fb) { - dma_addr_t dma; - - fb->panel = &vga; - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} - -static int cp_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + fb->panel = versatile_clcd_get_panel("VGA"); + if (!fb->panel) + return -EINVAL; -static void cp_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, SZ_1M); } static struct clcd_board clcd_data = { .name = "Integrator/CP", + .caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888, .check = clcdfb_check, .decode = clcdfb_decode, .enable = cp_clcd_enable, .setup = cp_clcd_setup, - .mmap = cp_clcd_mmap, - .remove = cp_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static struct amba_device clcd_device = { |