Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC updates from Olof Johansson:
 "This contains the bulk of new SoC development for this merge window.

  Two new platforms have been added, the sunxi platforms (Allwinner A1x
  SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
  series of ARMv7 platforms from them, where the hope is that we can
  keep the platform code generic enough to have them all share one mach
  directory.  The new Broadcom platform is contributed by Christian
  Daudt.

  Highbank has grown support for Calxeda's next generation of hardware,
  ECX-2000.

  clps711x has seen a lot of cleanup from Alexander Shiyan, and he's
  also taken on maintainership of the platform.

  Beyond this there has been a bunch of work from a number of people on
  converting more platforms to IRQ domains, pinctrl conversion, cleanup
  and general feature enablement across most of the active platforms."

Fix up trivial conflicts as per Olof.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits)
  mfd: vexpress-sysreg: Remove LEDs code
  irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids
  clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids
  irq: versatile: delete dangling variable
  ARM: sunxi: add missing include for mdelay()
  ARM: EXYNOS: Avoid early use of of_machine_is_compatible()
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  ARM: sunxi: Add missing sun4i.dtsi file
  pinctrl: samsung: Do not initialise statics to 0
  ARM i.MX6: remove gate_mask from pllv3
  ARM i.MX6: Fix ethernet PLL clocks
  ARM i.MX6: rename PLLs according to datasheet
  ARM i.MX6: Add pwm support
  ARM i.MX51: Add pwm support
  ARM i.MX53: Add pwm support
  ARM: mx5: Replace clk_register_clkdev with clock DT lookup
  ...

6 files changed, 41 insertions, 186 deletions

diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
index 1588a365f610..0452f5f3f034 100644
--- a/arch/arm/mach-clps711x/include/mach/autcpu12.h
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
@@ -21,24 +21,15 @@
 #define __ASM_ARCH_AUTCPU12_H
 
 /*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2
- * (nCS2). This is the mapping for it.
- */
-#define AUTCPU12_PHYS_CS8900A		CS2_PHYS_BASE		/* physical */
-#define AUTCPU12_VIRT_CS8900A		(0xfe000000)		/* virtual */
-
-/*
  * The flash bank is wired to chip select 0
  */
 #define AUTCPU12_PHYS_FLASH		CS0_PHYS_BASE		/* physical */
 
 /* offset for device specific information structure */
 #define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
-/*
-* Videomemory is the internal SRAM (CS 6)	
-*/
+
+/* Videomemory in the internal SRAM (CS 6) */
 #define AUTCPU12_PHYS_VIDEO		CS6_PHYS_BASE
-#define AUTCPU12_VIRT_VIDEO		(0xfd000000)
 
 /*
 * All special IO's are tied to CS1
@@ -49,8 +40,6 @@
 
 #define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
 
-#define AUTCPU12_PHYS_SMC              	CS1_PHYS_BASE +0x06000000  /* physical */
-
 #define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
 
 #define AUTCPU12_PHYS_TOUCH            	CS1_PHYS_BASE +0x0A000000  /* physical */
@@ -59,14 +48,6 @@
 
 #define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
 
-/* 
-* defines for smartmedia card access 
-*/
-#define AUTCPU12_SMC_RDY		(1<<2)
-#define AUTCPU12_SMC_ALE		(1<<3)
-#define AUTCPU12_SMC_CLE  		(1<<4)
-#define AUTCPU12_SMC_PORT_OFFSET	PBDR
-#define AUTCPU12_SMC_SELECT_OFFSET 	0x10
 /*
 * defines for lcd contrast 
 */
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
index c82e21ca49c7..01d1b9559710 100644
--- a/arch/arm/mach-clps711x/include/mach/clps711x.h
+++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
@@ -257,6 +257,9 @@
 #define MEMCFG_BUS_WIDTH_16	(0)
 #define MEMCFG_BUS_WIDTH_8	(3)
 
+#define MEMCFG_SQAEN		(1 << 6)
+#define MEMCFG_CLKENB		(1 << 7)
+
 #define MEMCFG_WAITSTATE_8_3	(0 << 2)
 #define MEMCFG_WAITSTATE_7_3	(1 << 2)
 #define MEMCFG_WAITSTATE_6_3	(2 << 2)
@@ -274,4 +277,28 @@
 #define MEMCFG_WAITSTATE_2_0	(14 << 2)
 #define MEMCFG_WAITSTATE_1_0	(15 << 2)
 
+/* INTSR1 Interrupts */
+#define IRQ_CSINT		(4)
+#define IRQ_EINT1		(5)
+#define IRQ_EINT2		(6)
+#define IRQ_EINT3		(7)
+#define IRQ_TC1OI		(8)
+#define IRQ_TC2OI		(9)
+#define IRQ_RTCMI		(10)
+#define IRQ_TINT		(11)
+#define IRQ_UTXINT1		(12)
+#define IRQ_URXINT1		(13)
+#define IRQ_UMSINT		(14)
+#define IRQ_SSEOTI		(15)
+
+/* INTSR2 Interrupts */
+#define IRQ_KBDINT		(16 + 0)
+#define IRQ_SS2RX		(16 + 1)
+#define IRQ_SS2TX		(16 + 2)
+#define IRQ_UTXINT2		(16 + 12)
+#define IRQ_URXINT2		(16 + 13)
+
+/* INTSR3 Interrupts */
+#define IRQ_DAIINT		(32 + 0)
+
 #endif /* __MACH_CLPS711X_H */
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
deleted file mode 100644
index 56e5c2c23504..000000000000
--- a/arch/arm/mach-clps711x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/mach-clps711x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for CLPS711X-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
-#error INTSR stride != INTMR stride
-#endif
-
-		.macro	get_irqnr_and_base, irqnr, stat, base, mask
-		mov	\base, #CLPS711X_VIRT_BASE
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #4
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-		movs	\stat, \stat, lsr #4
-		bne	1001f
-
-		add	\base, \base, #INTSR2 - INTSR1
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #16
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-
-1001:		tst	\stat, #255
-		addeq	\irqnr, \irqnr, #8
-		moveq	\stat, \stat, lsr #8
-		tst	\stat, #15
-		addeq	\irqnr, \irqnr, #4
-		moveq	\stat, \stat, lsr #4
-		tst	\stat, #3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\stat, \stat, lsr #2
-		tst	\stat, #1
-		addeq	\irqnr, \irqnr, #1
-		moveq	\stat, \stat, lsr #1
-		tst	\stat, #1			@ bit 0 should be set
-		.endm
-
-
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 8497775d6ee5..2f23dd5d73e4 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -24,7 +24,10 @@
 
 #include <mach/clps711x.h>
 
-#define CLPS711X_VIRT_BASE	IOMEM(0xff000000)
+#define IO_ADDRESS(x)		(0xdc000000 + (((x) & 0x03ffffff) | \
+				(((x) >> 2) & 0x3c000000)))
+
+#define CLPS711X_VIRT_BASE	IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE))
 
 #ifndef __ASSEMBLY__
 #define clps_readb(off)		readb(CLPS711X_VIRT_BASE + (off))
@@ -61,67 +64,17 @@
 #define CS7_PHYS_BASE		(0x00000000)
 #endif
 
-#define SYSPLD_VIRT_BASE	0xfe000000
-#define SYSPLD_BASE		SYSPLD_VIRT_BASE
-
-#if defined (CONFIG_ARCH_CDB89712)
-
-#define ETHER_START      0x20000000
-#define ETHER_SIZE       0x1000
-#define ETHER_BASE       0xfe000000
-
-#endif
+#define CLPS711X_SRAM_BASE	CS6_PHYS_BASE
+#define CLPS711X_SRAM_SIZE	(48 * 1024)
 
+#define CLPS711X_SDRAM0_BASE	(0xc0000000)
+#define CLPS711X_SDRAM1_BASE	(0xd0000000)
 
 #if defined (CONFIG_ARCH_EDB7211)
 
-/*
- * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
- * and repeat across it. This is the mapping for it.
- *
- * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
-
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
- * (nCS2). This is the mapping for it.
- *
- * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
-#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
-#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
+/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */
+#define EP7211_PHYS_EXTKBD	CS3_PHYS_BASE
 
 #endif /* CONFIG_ARCH_EDB7211 */
 
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the EDB7211.
- */
-#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
-#define EDB_PD2_LCDEN		(1<<2)
-#define EDB_PD3_LCDBL		(1<<3)
-
 #endif
diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h
deleted file mode 100644
index 14d215f8ca81..000000000000
--- a/arch/arm/mach-clps711x/include/mach/irqs.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/irqs.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Interrupts from INTSR1
- */
-#define IRQ_CSINT			4
-#define IRQ_EINT1			5
-#define IRQ_EINT2			6
-#define IRQ_EINT3			7
-#define IRQ_TC1OI			8
-#define IRQ_TC2OI			9
-#define IRQ_RTCMI			10
-#define IRQ_TINT			11
-#define IRQ_UTXINT1			12
-#define IRQ_URXINT1			13
-#define IRQ_UMSINT			14
-#define IRQ_SSEOTI			15
-
-#define INT1_IRQS			(0x0000fff0)
-
-/*
- * Interrupts from INTSR2
- */
-#define IRQ_KBDINT			(16+0)	/* bit 0 */
-#define IRQ_SS2RX			(16+1)	/* bit 1 */
-#define IRQ_SS2TX			(16+2)	/* bit 2 */
-#define IRQ_UTXINT2			(16+12)	/* bit 12 */
-#define IRQ_URXINT2			(16+13)	/* bit 13 */
-
-#define INT2_IRQS			(0x30070000)
-
-#define NR_IRQS				30
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
index f7f4c1201898..9a433155bf58 100644
--- a/arch/arm/mach-clps711x/include/mach/syspld.h
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -23,14 +23,9 @@
 #define __ASM_ARCH_SYSPLD_H
 
 #define SYSPLD_PHYS_BASE	(0x10000000)
+#define SYSPLD_VIRT_BASE	IO_ADDRESS(SYSPLD_PHYS_BASE)
 
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-#define SYSPLD_REG(type,off)	(*(volatile type *)(SYSPLD_BASE + off))
-#else
-#define SYSPLD_REG(type,off)	(off)
-#endif
+#define SYSPLD_REG(type, off)	(*(volatile type *)(SYSPLD_VIRT_BASE + (off)))
 
 #define PLD_INT		SYSPLD_REG(u32, 0x000000)
 #define PLD_INT_PENIRQ		(1 << 5)