diff options
author | Claudiu Beznea <claudiu.beznea@microchip.com> | 2021-04-15 13:49:55 +0300 |
---|---|---|
committer | Nicolas Ferre <nicolas.ferre@microchip.com> | 2021-07-19 14:32:12 +0200 |
commit | 15126bb61b12ed1ddf006367bd6029dce7409532 (patch) | |
tree | ab9b12a3f4511a156dfb970b3a1a3ab586298155 /arch/arm/mach-at91 | |
parent | e3821ed4767000fa49b40be50de2344e2204bcd6 (diff) | |
download | linux-15126bb61b12ed1ddf006367bd6029dce7409532.tar.bz2 |
ARM: at91: pm: add support for waiting MCK1..4
SAMA7G5 has 5 master clocks 0..4. MCK0 is controlled differently than
MCK 1..4. MCK 1..4 should also be saved/restored in the last phase of
suspend/resume. Thus, adapt wait_mckrdy to support also MCK1..4.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210415105010.569620-10-claudiu.beznea@microchip.com
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r-- | arch/arm/mach-at91/pm_suspend.S | 48 |
1 files changed, 35 insertions, 13 deletions
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index 1f63bbfad728..7669b32d5257 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -22,11 +22,23 @@ tmp3 .req r6 /* * Wait until master clock is ready (after switching master clock source) + * + * @r_mckid: register holding master clock identifier + * + * Side effects: overwrites r7, r8 */ - .macro wait_mckrdy -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MCKRDY - beq 1b + .macro wait_mckrdy r_mckid +#ifdef CONFIG_SOC_SAMA7 + cmp \r_mckid, #0 + beq 1f + mov r7, #AT91_PMC_MCKXRDY + b 2f +#endif +1: mov r7, #AT91_PMC_MCKRDY +2: ldr r8, [pmc, #AT91_PMC_SR] + and r8, r7 + cmp r8, r7 + bne 2b .endm /* @@ -231,7 +243,9 @@ sr_dis_exit: bic tmp1, tmp1, #AT91_PMC_PRES orr tmp1, tmp1, #AT91_PMC_PRES_64 str tmp1, [pmc, tmp3] - wait_mckrdy + + mov tmp3, #0 + wait_mckrdy tmp3 b 1f 0: @@ -267,10 +281,13 @@ sr_dis_exit: bne 5f /* Set lowest prescaler for fast resume. */ + ldr tmp3, .mckr_offset ldr tmp1, [pmc, tmp3] bic tmp1, tmp1, #AT91_PMC_PRES str tmp1, [pmc, tmp3] - wait_mckrdy + + mov tmp3, #0 + wait_mckrdy tmp3 b 6f 5: /* Restore RC oscillator state */ @@ -307,6 +324,7 @@ sr_dis_exit: .macro at91_pm_ulp1_mode ldr pmc, .pmc_base ldr tmp2, .mckr_offset + mov tmp3, #0 /* Save RC oscillator state and check if it is enabled. */ ldr tmp1, [pmc, #AT91_PMC_SR] @@ -348,7 +366,7 @@ sr_dis_exit: orr tmp1, tmp1, #AT91_PMC_CSS_MAIN str tmp1, [pmc, tmp2] - wait_mckrdy + wait_mckrdy tmp3 /* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */ ldr tmp1, [pmc, #AT91_CKGR_MOR] @@ -361,7 +379,7 @@ sr_dis_exit: nop nop - wait_mckrdy + wait_mckrdy tmp3 /* Enable the crystal oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] @@ -377,7 +395,7 @@ sr_dis_exit: bic tmp1, tmp1, #AT91_PMC_CSS str tmp1, [pmc, tmp2] - wait_mckrdy + wait_mckrdy tmp3 /* Switch main clock source to crystal oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] @@ -394,7 +412,7 @@ sr_dis_exit: orr tmp1, tmp1, #AT91_PMC_CSS_MAIN str tmp1, [pmc, tmp2] - wait_mckrdy + wait_mckrdy tmp3 /* Restore RC oscillator state */ ldr tmp1, .saved_osc_status @@ -573,10 +591,12 @@ sr_dis_exit: save_mck: str tmp1, [pmc, tmp2] - wait_mckrdy + mov tmp3, #0 + wait_mckrdy tmp3 at91_plla_disable + ldr tmp3, .pm_mode cmp tmp3, #AT91_PM_ULP1 beq ulp1_mode @@ -599,7 +619,8 @@ ulp_exit: ldr tmp2, .saved_mckr str tmp2, [pmc, tmp1] - wait_mckrdy + mov tmp3, #0 + wait_mckrdy tmp3 .endm @@ -611,7 +632,8 @@ ulp_exit: bic tmp1, tmp1, #AT91_PMC_CSS str tmp1, [pmc, tmp2] - wait_mckrdy + mov tmp3, #0 + wait_mckrdy tmp3 /*BUMEN*/ ldr r0, .sfrbu |