ARM: at91: aic can use fast eoi handler type

The Advanced Interrupt Controller allows us to use the fast EOI handler type.
It lets us remove the Atmel specific workaround into arch/arm/kernel/irq.c
used to indicate to the AIC the end of the interrupt treatment.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

3 files changed, 17 insertions, 14 deletions

diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 325837a264c9..be42cf0e74bd 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -26,6 +26,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_gpio.h>
 
+#include <asm/mach/irq.h>
+
 #include <mach/hardware.h>
 #include <mach/at91_pio.h>
 
@@ -585,15 +587,14 @@ static struct irq_chip gpio_irqchip = {
 
 static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct irq_data *idata = irq_desc_get_irq_data(desc);
-	struct irq_chip *chip = irq_data_get_irq_chip(idata);
 	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
 	void __iomem	*pio = at91_gpio->regbase;
 	unsigned long	isr;
 	int		n;
 
-	/* temporarily mask (level sensitive) parent IRQ */
-	chip->irq_ack(idata);
+	chained_irq_enter(chip, desc);
 	for (;;) {
 		/* Reading ISR acks pending (edge triggered) GPIO interrupts.
 		 * When there none are pending, we're finished unless we need
@@ -614,7 +615,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 			n = find_next_bit(&isr, BITS_PER_LONG, n + 1);
 		}
 	}
-	chip->irq_unmask(idata);
+	chained_irq_exit(chip, desc);
 	/* now it may re-trigger */
 }
 
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
index ac8b7dfc85ef..2d510ee6ac03 100644
--- a/arch/arm/mach-at91/include/mach/irqs.h
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -28,13 +28,6 @@
 
 
 /*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- *   (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
  * IRQ interrupt symbols are the AT91xxx_ID_* symbols
  * for IRQs handled directly through the AIC, or else the AT91_PIN_*
  * symbols in gpio.h for ones handled indirectly as GPIOs.
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index cfcfcbe36269..2d5d4c88a527 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -55,6 +55,15 @@ static void at91_aic_unmask_irq(struct irq_data *d)
 	at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
 }
 
+static void at91_aic_eoi(struct irq_data *d)
+{
+	/*
+	 * Mark end-of-interrupt on AIC, the controller doesn't care about
+	 * the value written. Moreover it's a write-only register.
+	 */
+	at91_aic_write(AT91_AIC_EOICR, 0);
+}
+
 unsigned int at91_extern_irq;
 
 #define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq)
@@ -128,11 +137,11 @@ void at91_irq_resume(void)
 
 static struct irq_chip at91_aic_chip = {
 	.name		= "AIC",
-	.irq_ack	= at91_aic_mask_irq,
 	.irq_mask	= at91_aic_mask_irq,
 	.irq_unmask	= at91_aic_unmask_irq,
 	.irq_set_type	= at91_aic_set_type,
 	.irq_set_wake	= at91_aic_set_wake,
+	.irq_eoi	= at91_aic_eoi,
 };
 
 static void __init at91_aic_hw_init(unsigned int spu_vector)
@@ -171,7 +180,7 @@ static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq,
 	/* Active Low interrupt, without priority */
 	at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW);
 
-	irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq);
+	irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq);
 	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
 
 	return 0;
@@ -238,7 +247,7 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
 		/* Active Low interrupt, with the specified priority */
 		at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
 
-		irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq);
+		irq_set_chip_and_handler(i, &at91_aic_chip, handle_fasteoi_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}